Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy

Transcription

1 Edgehog Where high performance is the standard Performance, Precision, Economy

2 For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling, serving over 60 countries worldwide. Our innovative cutting geometries, materials and coating technologies are providing effective manufacturing solutions to an expanding and increasingly diverse range of industries from agriculture and construction to aerospace, power generation and automotive, to name but a few. From our European HQ and custom tooling production facilities in the UK, we ensure that our customers not only obtain the latest cutting tool technologies direct from our extensive stocks, but also have access to specialist tool design and manufacturing solutions to meet unique applications. M.A.FORD Where high performance is the standard. M.A.FORD Quality Policy Ultimately we are judged by our customer. The product that we supply must satisfy our customers needs and meet their requirements, or they will find an alternative source. The customer will define quality. It therefore becomes everyone s quality mission to know their customer, to fully understand their requirements, and to commit to continued improvement in satisfying those needs and requirements.

3 Index M.A.FORD For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling. Our innovative cutting geometries, materials and coating technologies are providing effective manufacturing solutions to an expanding and increasingly diverse range of industries from agriculture and construction to aerospace, power generation and automotive, to name but a few. As our tooling is designed and manufactured both in the USA and at the M.A.FORD Europe Custom Tools Division in the UK, we have a fully integrated and seamless approach not only in quality and manufacturing excellence, but also in the high standards of customer service and support we provide on a daily basis. Across our business, we supply tooling to more than 60 countries world wide to help customers improve productivity, reduce costs and maximise margins. From our European HQ and custom tooling production facilities in the UK, we ensure that our customers not only obtain the latest cutting tool technologies direct from our extensive stocks, but also have access to specialist tooling design and manufacturing for unique applications. With the M.A.FordMax range, we re continuing our reputation for excellence and making our tooling even more accessible and relevant for our existing and new customers looking to improve performance and productivity in an economic package without compromising quality. M.A.FORD Where high performance is the standard. Product Contents 2-6 FordMax Carbide 7-13 FordMax Carbide for Aluminium FordMax Carbide Chamfer Mills 15 Technical Information FordMax High Performance & General Purpose Technical Information FordMax Carbide Technical Information 72 FordMax - Carbide & HSS Technical Information FordMax Carbide Technical Information Approved M.A.FORD Regrinding & Recoating Service Custom Tool Division A subsidiary of M.A.Ford Europe Ltd

4 Product contents FordMax Carbide Shank Form Z Application Length Ø Range (mm) Tool Illustration Coating Material Groups Page HA 2 0,20-20,00 X HA 2 1,00-20,00 ALtima 164A 8 HA 3 1,00-20,00 X HA 3 1,00-20,00 ALtima 169A 8 HA 4 1,00-20,00 X HA 4 1,00-20,00 ALtima 163A 8 HA 2 1,00-20,00 X HA 2 1,00-20,00 ALtima 166A 9 HA 4 1,00-20,00 X HA 4 1,00-20,00 ALtima 165A 9 HA 4 3,00-20,00 HP ALTiN V4S 10 HB 3-4 8,00-20,00 ALtima 192A 10 HA 2 0,20-25,00 X HA 2 1,00-25,00 ALtima 121A 11 HA 3 1,00-25,00 X HA 3 1,00-25,00 ALtima 116A 11 HA 4 0,20-25,00 X HA 4 1,00-25,00 ALtima 111A 11 HA 2 0,40-25,00 X HA 2 1,00-25,00 ALtima 150A 12 HA 3 1,00-25,00 X HA 3 1,00-25,00 ALtima 145A 12 HA 4 1,00-25,00 X HA 4 1,00-25,00 ALtima 140A 12 HA 4 6,00-20,00 X V4L 13 HA 4 6,00-20,00 ALTiN V4L 13 HA 4 6,00-20,00 X V4LB 13 HA 4 6,00-20,00 ALTiN V4LB 13 Technical Information

5 Product contents FordMax Carbide For Aluminium Shank Form Z Application Length Ø Range (mm) Tool Illustration Coating Material Groups Page HA 2 3,00-20,00 X GT2 14 HA 2 3,00-20,00 X GT2B 14 HA 3 3,00-20,00 X GT3 14 HA 3 3,00-20,00 X GT3B 14 HA 3 6,00-25,00 X Technical Information 20 Shank Form Z Included Angle Application FordMax Carbide Chamfer Mills Tool Length Ø Range (mm) Tool Illustration Coating Material Groups Page HA ,00-16,00 X ALTiN VCM60 15 HA ,00-16,00 X ALTiN VCM90 15 Type Shank Form Drilling Depth Ø Range (mm) FordMax High Performance Internal Coolant Tool Illustration Coating Material Groups Page HP (Micro) HA Various 0,10-3,00 X X HP (Micro) HA Various 0,10-3,00 X ALtima Micro 305AM 24 HP HA Spot Drill 3,00-16,00 X ALtima 200S 24 HP HA 3 x D 2,50-20,00 X ALtima XD SSM HA 3 x D 3,00-16,00 ALtima XD CSM DIN 6537L 5 x D 3,00-16,00 X HP ALTiN HPDSR HP DIN 6537L 5 x D 3,00-16,00 HP ALTiN HPDCR HA 5 x D 0,50-16,00 X ALtima XD SRM HA 5 x D 3,00-20,00 ALtima XD CRM HA 7+ x D 3,00-12,00 ALtima XD CLM (Micro MD) HA 10 x D 2,00-2,95 ALtima MD CLM 36 HA 12+ x D 4,00-12,70 ALtima XD CEM 37 HP HA 4-5 x D 2,00-16,00 X X Technical Information

6 Product contents FordMax General Purpose Type Shank Form Drilling Depth Ø Range (mm) Internal Coolant Tool Illustration Coating Material Groups Page GP (Micro) PCB Various 0,10-3,15 X X GP Parallel 3 x D 0,80-20,00 X X GP Parallel 3 x D 2,40-12,00 X X GP Parallel 5 x D 0,30-20,00 X X GP (Micro) Parallel 5 x D 0,50-3,15 X X GP Parallel 5 x D 0,30-20,00 X X GP Parallel Centre Drill 0,50-5,00 X X GP Parallel Spot Drill 90 5,00-12,00 X X GP Parallel Spot Drill 120 5,00-12,00 X X Technical Information Type Shank Form Tolerance Ø Range (mm) FordMax Carbide Internal Coolant Tool Illustration Coating Material Groups Page 272 M.A.Ford Standard H7 0,33-16,00 X X Technical Information 72 4

7 Product contents FordMax - Carbide & HSS Tool Material Z Included Angles Ø Range (mm) Tool Illustration Type Surface Treatment Material Groups Page VHM 1 60, 82, 90, 100 3,20-25,40 UniFlute X HSS 1 60, 82, 90, 100, 120 3,20-76,20 UniFlute Steam Treated HSS 1 60, 82, 90, 100, 120 3,20-25,40 UniFlute ALtima Blaze 61B 75 HSS 1 60, 82, 90, 100, 120 3,20-25,40 UniFlute TiN 61T 75 HSS 1 60, 82, 90 4,30-31,00 Single Flute Bright Finish HSS 1 60, 82, 90 4,30-31,00 Single Flute TiN 88T 82 HSS 3 60, 82, 90, 100, 120 6,40-50,80 Aircraft 3 Flute Bright Finish HSS 3 60, 82, 90 4,30-31,00 3 Flute Bright Finish HSS 3 60, 82, 90 4,30-31,00 3 Flute TiN 89T 84 VHM 6 60, 82, 90, 100, 120 3,20-38,10 Vibration Free 6 Flute X HSS 6 60, 82, 90, 100, 120 3,20-76,20 Vibration Free 6 Flute Steam Treated HSS 6 HSS 6 60, 82, 90, 100, , 82, 90, 100, 120 3,20-25,40 3,20-25,40 Vibration Free 6 Flute Vibration Free 6 Flute ALtima Blaze 79B 78 TiN 79T 78 UniFlute HSS Countersink Sets - 61, 61T Steam Treated 61 Set 76 TiN 61T Set 76 Vibration Free HSS Countersink Sets - 79, 79T Steam Treated 79 Set 79 TiN 79T Set 79 3 Flute Aircraft HSS Countersink Sets - 92 Bright Finish 92 Set 80 3 Flute HSS 90º Countersink Sets - 89, 89T Bright Finish 89 Set 85 TiN 89T Set 85 UniFlute Resharpening Fixture Regrinding Accessory Technical Information

8 Product contents FordMax Carbide Diameter Range Ø1,6 - Ø25,0 Ø3,0 - Ø25,0 Ø2,4 - Ø25,0 Ø2,4 - Ø25,0 Ø3,0 - Ø19,0 Ø3,0 - Ø19,0 Ø3,0 - Ø19,0 Ø3,0 - Ø19,0 Ø3,0 - Ø25,0 Ø3,0 - Ø25,0 Ø3,0 - Ø19,0 Ø3,0 - Ø16,0 Ø2,4 - Ø19,0 Available Shank Ø 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* 3,0 6,0 8,0* Lengths Tool Illustration Page SA 90 SB 91 SC 92 SD 93 SE 94 SF 95 SG 96 SH 97 SJ 98 SK 99 SL 100 SM 101 SN 102 Technical Information * 12,0mm and above are available with an 8.0mm shank on request as a non-stock standard. 6

9 Carbide TuffCut endmills are designed to provide the outstanding performance and results to minimise process downtime while maximising productivity and cost efficiency. Included in the range are high performance endmills developed for specific applications such as stainless steels and high temperature alloys, hardened steel and aluminium and softer alloys. We also carry a complete family of standard carbide endmills designed for efficient general purpose milling of all steels, cast irons and most other materials. TuffCut GP Stub/Short Length 164, 169, 163 TuffCut GP Stub/Short Length 166, 165 TuffCut GP Stub/Short Length V4S TuffCut GP Stub/Short & Standard Length 192 Page M.A. Ford solid carbide endmills are ideal for tough or abrasive work. On many jobs they can run faster than HSS or Cobalt due to their high heat resistance, resulting higher production rates. With more than fifty different styles available, we can deliver the correct combination of size, flute length, numbers of flutes, geometry and coating to meet your precise needs. TuffCut GP Standard Length 121, 116, 111 TuffCut GP Standard Length 150, 145, 140 TuffCut GP Long Length (Anti- Vibration) V4L & V4LB TuffCut GP For Aluminium Standard Length Z2 Z3 TuffCut GP Standard Length GT2, GT3 & GT2B, GT3B 14 Tool Material Number of Flutes Helix Angle Centre Cutting TuffCut GP Standard Length Lengths Cutting Directon Profiling Slotting TuffCut GP Chamfer Mills TuffCut GP Chamfer Mills Standard Length VCM60, VCM D Scanning Shank Material Hardness Coating Technical Information OR COATED P01 Uncoated or Coated Technical Information Steel Cast Iron Workpiece Material Group Hardened Steels (35-65Rc) Stainless Steels Special Alloys Non-Ferrous 7

10 GP - Stub/Short Length Z2 Z4 Z3 OR COATED 164, 169, 163 Example Ordering Code - Select series number then add tool number (E.g ,0mm 2 Flute Uncoated Endmill). D2 D1 L2 L1 Z2 Z3 Z Uncoated Coated Ø D¹ Ø D² L¹ L² Uncoated Coated Uncoated Coated Uncoated Coated 0,2 3,0 38,0 0,4 47, ,3 3,0 38,0 0,6 34, ,4 3,0 38,0 0,8 24, ,5 3,0 38,0 1,0 24, ,6 3,0 38,0 1,2 24, ,7 3,0 38,0 1,4 24, ,8 3,0 38,0 1,6 18, ,9 3,0 38,0 1,8 21, ,0 3,0 38,0 2,0 11,68-11,68-11, ,1 3,0 38,0 2,2 21, ,2 3,0 38,0 2,4 20, ,3 3,0 38,0 2,6 20, ,4 3,0 38,0 2,8 21, ,5 3,0 38,0 3,0 11,68-11,68-11, ,6 3,0 38,0 3,2 16, ,7 3,0 38,0 3,4 16, ,8 3,0 38,0 3,6 16, ,9 3,0 38,0 3,8 16, ,0 3,0 38,0 4,0 9,28-9,28-9, ,5 3,0 38,0 5,0 8,79-8,79-8, ,0 3,0 38,0 6,0 8,57 11,22 8,57 11,22 8,57 11, A 3,5 4,0 51,0 7,0 11,99-11,99-11, ,0 4,0 51,0 8,0 11,33 14,02 11,33 14,02 11,33 14, A 4,5 5,0 51,0 9,0 15,04-15,04-15, ,0 5,0 51,0 11,0 14,02 18,19 14,02 18,19 14,02 18, A 5,5 6,0 51,0 12,0 25,97-25,97-25, ,0 6,0 51,0 13,0 14,86 19,03 14,86 19,03 14,86 19, A 7,0 8,0 51,0 13,0 19,32-19,32-19, ,0 8,0 51,0 13,0 20,28 26,25 20,28 26,25 20,28 26, A 9,0 9,0 51,0 14,0 25,07-25,07-25, ,0 10,0 51,0 14,0 27,68 34,43 27,68 34,43 27,68 34, A 11,0 11,0 64,0 16,0 32,36-32,36-32, ,0 12,0 64,0 16,0 41,34 50,73 41,34 50,73 41,34 50, A 14,0 14,0 70,0 18,0 96,13-96,13-96, ,0 16,0 76,0 20,0 79,03 89,91 79,03 89,91 79,03 89, A 18,0 18,0 76,0 25,0 158,65-158,65-158, ,0 20,0 76,0 25,0 146,50 167,02 146,50 167,02 146,50 167, A P16 8

11 GP - Stub/Short Length Z2 Z4 OR COATED 166, 165 Example Ordering Code - Select series number then add tool number (E.g A = 6,0mm 4 Flute Ballnose Endmill ALtima Coated) D2 D1 L2 L1 Z2 Z Uncoated Coated Ø D¹ Ø D² L¹ L² Uncoated Coated Uncoated Coated P16 1,0 3,0 38,0 2,0 14,81-14, ,5 3,0 38,0 3,0 14,81-14, ,0 3,0 38,0 4,0 10,93-10, ,5 3,0 38,0 5,0 10,31-10, ,0 3,0 38,0 6,0 10,06 12,71 10,06 12, A 3,5 4,0 51,0 7,0 14,08-14, ,0 4,0 51,0 8,0 13,37 16,04 13,37 16, A 4,5 5,0 51,0 9,0 17,68-17, ,0 5,0 51,0 11,0 16,64 20,81 16,64 20, A 5,5 6,0 51,0 12,0 33,03-33, ,0 6,0 51,0 13,0 17,48 21,65 17,48 21, A 7,0 8,0 51,0 13,0 22,88-22, ,0 8,0 51,0 13,0 23,86 29,83 23,86 29, A 9,0 9,0 51,0 14,0 29,49-29, ,0 10,0 51,0 14,0 32,58 39,33 32,58 39, A 11,0 11,0 64,0 16,0 37,47-37, ,0 12,0 64,0 16,0 48,60 58,01 48,60 58, A 14,0 14,0 70,0 18,0 116,92-116, ,0 16,0 76,0 20,0 93,02 103,92 93,02 103, A 18,0 18,0 76,0 25,0 193,92-193, ,0 20,0 76,0 25,0 189,17 192,86 189,17 192, A 9

12 GP - Stub/Short Length Z4 V4S HP ALTiN ATED D3 C Example Ordering Code - Select series number then add tool number (E.g. V4S 0600A = 6,0mm 4 Flute Endmill ALtima Coated). D2 D1 L2 L1 L3 Z4 V4S.. Ø D¹ Ø D² L¹ L² L³ Ø D³ C Price 3,0 6,0 45,0 6, ,1 x A 32,77 4,0 6,0 45,0 8, ,1 x A 32,77 5,0 6,0 45,0 10, ,1 x A 32,77 6,0 6,0 55,0 9,0 14,0 5,7 0,25 x A 25,92 8,0 8,0 58,0 12,0 18,0 7,7 0,25 x A 33,84 10,0 10,0 66,0 15,0 22,0 9,7 0,25 x A 52,70 12,0 12,0 73,0 18,0 26,0 11,7 0,5 x A 64,80 16,0 16,0 82,0 24,0 34,0 15,7 0,5 x A 109,44 20,0 20,0 93,0 30,0 42,0 19,7 0,5 x A 181,44 P18 GP - Stub/Short & Standard Length Z3 Z4 Weldon HB DIN D 2 D 1 L 1 L 2 Z3 Z4 Example Ordering Code - Select series number then add tool number (E.g A = 12,0mm 4 Flute Endmill ALtima Coated - Standard Length) Ø D¹ Ø D² L¹ L² Z Price 8,0 8,0 51,0 8, A 66,14 8,0 8,0 64,0 16, A 75,90 10,0 10,0 51,0 10, A 70,78 10,0 10,0 70,0 20, A 82,38 12,0 12,0 64,0 12, A 81,00 12,0 12,0 76,0 25, A 97,35 16,0 16,0 76,0 16, A 138,62 16,0 16,0 89,0 32, A 162,00 20,0 20,0 76,0 20, A 238,32 20,0 20,0 102,0 38, A 285,81 P19 10

13 Z2 Z4 Z3 GP - Standard Length OR COATED 121, 116, 111 Example Ordering Code - Select series number then add tool number (E.g A = 6,0mm 4 Flute Endmill ALtima Coated). D2 D1 L1 L2 Z2 Z3 Z Uncoated Coated Ø D¹ Ø D² L¹ L² Uncoated Coated Uncoated Coated Uncoated Coated P16 0,2 3,0 38,0 0,6 51, , ,3 3,0 38,0 0,9 37, , ,4 3,0 38,0 1,2 26, , ,5 3,0 38,0 1,5 26, , ,6 3,0 38,0 1,8 26, , ,7 3,0 38,0 2,1 26, , ,8 3,0 38,0 2,4 20, , ,9 3,0 38,0 2,7 20, , ,0 3,0 38,0 3,0 11,68 14,35 11,68 14,35 11,68 14, A 1,1 3,0 38,0 3,3 20, , ,2 3,0 38,0 3,6 20, , ,3 3,0 38,0 3,9 20, , ,4 3,0 38,0 4,2 20, , ,5 3,0 38,0 4,5 11, , ,5 3,0 38,0 6,0 18,21 14,35 11,68 14,35 18,21 14, A 1,6 3,0 38,0 4,8 16, , ,7 3,0 38,0 5,1 16, , ,8 3,0 38,0 5,4 16, , ,9 3,0 38,0 5,7 16, , ,0 3,0 38,0 6,0 10, , ,0 3,0 38,0 9,0 16,35 13,50 10,82 13,50 16,35 13, A 2,5 3,0 38,0 12,0 10,24 12,91 10,24 12,91 10,24 12, A 3,0 3,0 38,0 12,0 9,46 12,13 12,13 9,46 9,46 12, A 3,5 4,0 51,0 12,0 13,99 16,66 16,66 13,99 13,99 16, A 4,0 4,0 51,0 14,0 13,28 15,93 13,28 15,93 13,28 15, A 4,5 5,0 51,0 14,0 16,24-16,24-16, ,0 5,0 51,0 20,0 15,50 21,01 15,50 21,01 15,50 21, A 5,5 6,0 64,0 20,0 28,19-28,19-28, ,0 6,0 64,0 20,0 15,97 21,50 15,97 21,50 15,97 21, A 7,0 8,0 64,0 20,0 21,95-21,95-21, ,0 8,0 64,0 20,0 22,41 30,69 22,41 30,69 22,41 30, A 9,0 9,0 64,0 20,0 27,92-27,92-27, ,0 10,0 70,0 25,0 32,36 41,74 32,36 41,74 32,36 41, A 11,0 11,0 70,0 25,0 34,07-34,07-34, ,0 12,0 76,0 25,0 44,73 54,11 44,73 54,11 44,73 54, A 14,0 14,0 89,0 30,0 76,38-76,38-76, ,0 16,0 89,0 30,0 86,24 99,82 86,24 99,82 86,24 99, A 18,0 18,0 102,0 35,0 126,44-126,44-126,44 188, A 20,0 20,0 102,0 38,0 160,76 184,44 160,76 184,44 160,76 184, A 22,0 22,0 102,0 40,0 322,46-322,46-322, ,0 25,0 102,0 40,0 186,77 210,43 186,77 210,43 186,77 210, A 11

14 Z2 Z3 Z4 GP - Standard Length OR COATED 150, 145, 140 Example Ordering Code - Select series number then add tool number (E.g A = 6,0mm 4 Flute Ballnose Endmill ALtima Coated - Standard Length). D2 D1 L1 L2 Z2 Z3 Z Uncoated Coated Ø D¹ Ø D² L¹ L² Uncoated Coated Uncoated Coated Uncoated Coated 0,4 3,0 38,0 1,2 33, ,5 3,0 38,0 1,5 33, ,6 3,0 38,0 1,8 33, ,7 3,0 38,0 2,1 33, ,8 3,0 38,0 2,4 25, ,9 3,0 38,0 2,7 28, ,0 3,0 38,0 3,0 17,28 17,48 17,28-17,28 17, A 1,1 3,0 38,0 3,3 28, ,2 3,0 38,0 3,6 27, ,3 3,0 38,0 3,9 27, ,4 3,0 38,0 4,2 28, ,5 3,0 38,0 4,5 14, ,5 3,0 38,0 6,0 25,52 17,48 14,81-14,81 17, A 1,6 3,0 38,0 4,8 21, ,7 3,0 38,0 5,1 22, ,8 3,0 38,0 5,4 21, ,9 3,0 38,0 5,7 22, ,0 3,0 38,0 6,0 13, ,0 3,0 38,0 9,0 22,79 16,64 13,95-13,95 16, A 2,5 3,0 38,0 12,0 13,37 16, ,37 16, A 3,0 3,0 38,0 12,0 12,13 14,81 12,13 14,81 12,13 14, A 3,5 4,0 51,0 12,0 17,83 20, ,83 20, A 4,0 4,0 51,0 14,0 17,28 18,64 17,28 18,64 17,28 18, A 4,5 5,0 51,0 14,0 20,10 24, , A 5,0 5,0 51,0 20,0 19,37 24,88 19,37 24,88 19,37 24, A 5,5 6,0 64,0 20,0 35, , ,0 6,0 64,0 20,0 20,92 25,37 20,92 25,37 20,92 25, A 7,0 8,0 64,0 20,0 26, , ,0 8,0 64,0 20,0 26,07 34,31 26,07 34,31 26,06 34, A 9,0 9,0 64,0 20,0 39, , ,0 10,0 70,0 25,0 41,74 46,62 41,74 46,62 41,74 46, A 11,0 11,0 70,0 25,0 39, , ,0 12,0 76,0 25,0 59,28 68, ,28 68, A 14,0 14,0 89,0 30,0 86, , ,0 16,0 89,0 30,0 95,84 109, ,84 109, A 18,0 18,0 102,0 35,0 141, , ,0 20,0 102,0 38,0 189,15 212, ,15 212, A 22,0 22,0 102,0 40,0 291, , ,0 25,0 102,0 40,0 260,35 278, ,34 278, A P16 12

15 Z4 GP - Long Length (Anti-Vibration) OR ALTiN COATED V4L Example Ordering Code - Select series number then add tool number (E.g. V4L 0600B = 6,0mm 4 Flute Endmill ALtima Coated). D2 D1 L1 L2 Z4 V4L.. Uncoated Coated Ø D¹ Ø D² L¹ L² Uncoated Coated P16 6,0 6,0 75,0 25,0 49,68 58, B 8,0 8,0 75,0 25,0 71,11 80, B 10,0 10,0 100,0 40,0 93,44 109, B 12,0 12,0 100,0 50,0 122,10 141, B 12,0 12,0 150,0 75,0 171,81 190, B 16,0 16,0 150,0 75,0 270,59 298, B 20,0 20,0 150,0 75,0 331,72 372, B GP - Long Length (Anti-Vibration) Z4 OR ALTiN COATED V4LB Example Ordering Code - Select series number then add tool number (E.g. V4LB 0600B = 6,0mm 4 Flute Ballnose Endmill ALtima Coated). D2 L1 L2 D1 Z4 V4LB.. Uncoated Coated Ø D¹ Ø D² L¹ L² Uncoated Coated 6,0 6,0 75,0 25,0 54,48 63, B 8,0 8,0 75,0 25,0 81,00 92, B 10,0 10,0 100,0 40,0 103,02 119, B P16 12,0 12,0 100,0 50,0 131,67 150, B 12,0 12,0 150,0 75,0 181,37 200, B 16,0 16,0 150,0 75,0 277,78 305, B 20,0 20,0 150,0 75,0 350,86 391, B 13

16 GP - Standard Length Z2 Z3 GT2, GT3 Example Ordering Code - Select series number then add tool number (E.g. GT = 6,0mm 2 Flute Endmill). D2 D1 L2 L1 Z2 Z3 GT2. GT3. Ø D¹ Ø D² L¹ L² Price Price 3,0 3,0 51,0 12, , ,54 4,0 4,0 51,0 15, , ,54 5,0 5,0 57,0 20, , ,72 6,0 6,0 64,0 20, , ,81 8,0 8,0 64,0 20, , ,99 10,0 10,0 73,0 25, , ,34 12,0 12,0 73,0 25, , ,70 14,0 14,0 84,0 30, , ,08 16,0 16,0 93,0 35, , ,88 20,0 20,0 105,0 40, , ,67 P20 GP - Standard Length Z2 Z3 GT2B, GT3B Example Ordering Code - Select series number then add tool number (E.g. GT3B 0600 = 6,0mm 2 Flute Ballnose Endmill). D2 L1 L2 D1 Z2 Z3 GT2B. GT3B. Ø D¹ Ø D² L¹ L² Price Price 3,0 3,0 51,0 12, , ,67 4,0 4,0 51,0 15, , ,67 5,0 5,0 57,0 20, , ,81 6,0 6,0 64,0 20, , ,90 8,0 8,0 64,0 20, , ,08 10,0 10,0 73,0 25, , ,52 12,0 12,0 73,0 25, , ,88 14,0 14,0 84,0 30, , ,25 16,0 16,0 93,0 35, , ,15 20,0 20,0 105,0 40, , ,03 P20 14

17 GP - Standard Length Z3 134 Example Ordering Code - Select series number then add tool number (E.g = 12,0mm 3 Flute Endmill). D2 D1 L2 L1 Z Ø D¹ Ø D² L¹ L² Price 6,0 6,0 64,0 20, ,32 8,0 8,0 64,0 20, ,71 10,0 10,0 70,0 25, ,04 12,0 12,0 76,0 25, ,32 14,0 14,0 89,0 30, ,38 16,0 16,0 89,0 30, ,84 18,0 18,0 102,0 35, ,85 20,0 20,0 102,0 38, ,17 P20 25,0 25,0 102,0 50, ,43 GP Chamfer Mills - 60 & 90 Standard Length Z4 Z6 OR ALTiN COATED VCM60, VCM90 D2 D2 L1 L L2 L2 D1 D1 Z4 Z6 Z4 Z6 Example Ordering Code - Select series number then add tool number (E.g. VCM A = 8,0mm 90 4 Flute Chamfer Mill ALTiN Coated) VCM60.. VCM90.. Uncoated Coated Ø D¹ Ø D² Angle L¹ L² Z Uncoated Coated Uncoated Coated 4,0 4, ,0 3,3 4 27,19 32, ,0 4, ,0 1, ,19 32,86 6,0 6, ,0 5,0 4 34,03 39, ,0 6, ,0 2, ,03 39,70 8,0 8, ,0 6,8 4 43,78 51, ,0 8, ,0 3, ,78 51,57 10,0 10, ,0 8,5 6 58,88 68, ,0 10, ,0 4, ,88 68,76 12,0 12, ,0 10,0 6 81,95 93, ,0 12, ,0 5, ,95 93,67 16,0 16, ,0 13, ,89 140, ,0 16, ,0 7, ,89 140, A A A A A A 15

18 Technical Data FORDMAX Carbide 164, 169, 163, 166, 165, 121, 116, 111, 150, 145, 140, V4L, V4LB - Recommended Cutting Data Tool Lengths 2 Flute (Z2) 3 Flute (Z3) 4 Flute (Z4) GP GP GP Stub/Short * 165 * Standard * 140 * Long V4L ** V4LB ** * Please Note - 4 Flute (Z4) Are Not Recommended For Full Diameter Engagement/Slotting Applications Please use series V4S or choose from our high performance range of XR endmills ** V4L & V4LB long series are for profile milling For V4L & V4LB reduce speed by 20% For V4L & V4LB - Maximum Radial Cut (Ae) = 0,01 x D Please use lower Vc values shown for uncoated tools. Please use higher Vc values shown for ALtima coated tools Cutting Speeds By Material Group Workpiece Material Group Material Type Vc (m/min) Feed Recommendations Tool Diameter (mm) 3,0 5,0 6,0 8,0 10,0 Feed/Tooth (fz - mm) Steels P Low Carbon ,013 -,020,025 -,030,038 -,051,038 -,051,053 -,076 Medium Carbon Mould/Tool Steel 60-75,008 -,013,020 -,025,030 -,038,036 -,046,046 -,051 Free Machining Ferritic 60-85,013 -,020,025 -,030,038 -,051,038 -,051,053 -,076 Stainless Steels M Austenitic Martensitic 45-60,008 -,013,020 -,025,030 -,038,036 -,046,046 -,051 PH Stainless Cast Irons K Grey Cast Iron Ductile Cast Iron Malleable Iron 70-90,013 -,020,025 -,030,038 -,051,038 -,051,053 -,076 Special Alloys S High Temp Alloys 10-20,005 -,010,005 -,012,005 -,015,015 -,030,015 -,030 Titanium Alloys 20-50,008 -,010,010 -,015,015 -,020,020 -,030,020 -,030 Hardened Steels H HRc Rc Steel 45-60,008 -,013,010 -,030,010 -,030,025 -,050,025 -,050 Aluminium Alloys Non-Ferrous N Brass / Bronze Magnesium & Alloys ,020 -,040,040 -,050,050 -,060,060 -,070,070 -,080 RPM Formula For Metric - RPM = (Vc x 318,0) Endmill Ø Feedrate Formula For Metric - Feedrate = RPM x fz x Number Of Cutting Teeth 16

19 Technical Data FORDMAX Carbide 164, 169, 163, 166, 165, 121, 116, 111, 150, 145, 140, V4L, V4LB - Recommended Cutting Data Please use lower Vc values shown for uncoated tools. Please use higher Vc values shown for ALtima coated tools. Cutting Speeds By Material Group Workpiece Material Group Material Type Vc (m/min) Feed Recommendations Tool Diameter (mm) 12,0 16,0 20,0 25,0 Feed/Tooth (fz - mm) Steels P Low Carbon ,051 -,089,058 -,102,056 -,110,080 -,130 Medium Carbon Mould/Tool Steel 60-75,051 -,058,058 -,076,061 -,081,061 -,081 Free Machining Ferritic 60-85,051 -,089,058 -,102,056 -,110,080 -,130 Stainless Steels M Austenitic Martensitic 45-60,051 -,058,058 -,076,061 -,081,061 -,081 PH Stainless Grey Cast Iron Cast Irons K Ductile Cast Iron Malleable Iron 70-90,051 -,089,058 -,102,056 -,109,081 -,127 Special Alloys S High Temp Alloys 10-20,020 -,030,030 -,040,030 -,045,045 -,050 Titanium Alloys 20-50,030 -,040,040 -,045,045 -,050,050 -,075 Hardened Steels H HRc Rc Steel 45-60,030 -,060,050 -,070,060 -,080,070 -,090 Aluminium Alloys Non-Ferrous N Brass / Bronze Magnesium & Alloys RPM Formula For Metric - RPM = (Vc x 318,0) Endmill Ø Feedrate Formula For Metric - Feedrate = RPM x fz x Number Of Cutting Teeth,080 -,100,100 -,200,200 -,250,200 -,250 17

20 Technical Data FORDMAX Carbide V4S - Recommended Cutting Data Workpiece Material Group Steels Stainless Steels Cast Irons Special Alloys Hardened Steels P M K S H Material Type l Preferred q Possible - Not Possible Coolant 1 x D 0.5 x D Max Air MMS Vc (m/min) Low Carbon l l l Medium Carbon l l l Alloy Steels l l l Die/Tool Steels l l l Free Machining l - q Austenitic l - q Difficult Stainless l - q PH Stainless l - q Cobalt Chrome Alloys l - q Duplex (22%) l - q Super Duplex (25%) l - q Grey Cast Iron l q q Ductile Cast Iron l q q Malleable Iron l q q High Temp Alloys l Titanium Alloys l Hardened Steels Rc l q q Hardened Steels Rc l q q x D 1 x D 0.05 x D 1.5 x D 0.1 x D 1.5 x D 0.2 x D 1.5 x D 0.3 x D 1.5 x D 0.5 x D 1.5 x D Workpiece Material Group Material Type Tool Diameter 1,5mm 3mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm Feed/Tooth (fz - mm) Steels P Profiling 0,005 0,018 0,025 0,06 0,08 0,1 0,12 0,16 0,2 0,25 Slotting 0,003 0,009 0,012 0,03 0,04 0,05 0,06 0,08 0,1 0,125 Stainless Steels Cast Irons M K Profiling 0,005 0,018 0,025 0,06 0,08 0,1 0,12 0,16 0,2 0,25 Slotting 0,003 0,009 0,012 0,03 0,04 0,05 0,06 0,08 0,1 0,125 Profiling 0,005 0,018 0,025 0,06 0,08 0,1 0,12 0,16 0,2 0,25 Slotting 0,003 0,009 0,013 0,03 0,04 0,05 0,06 0,08 0,1 0,125 Profiling 0,003 0,009 0,013 0,032 0,038 0,044 0,064 0,076 0,089 0,127 Special Alloys S Slotting 0,0015 0,0045 0,007 0,016 0,019 0,022 0,032 0,038 0,045 0,065 Profiling 0,005 0,018 0,025 0,06 0,08 0,1 0,12 0,16 0,2 0,25 Slotting 0,003 0,009 0,013 0,03 0,04 0,05 0,06 0,08 0,1 0,125 Profiling <50HRC 0,005 0,016 0,023 0,057 0,069 0,08 0,114 0,137 0,16 0,229 Hardened Steels H Slotting <50HRC 0,003 0,008 0,013 0,028 0,035 0,04 0,065 0,07 0,08 0,115 Profiling >55HRC 0,003 0,01 0,015 0,041 0,051 0,058 0,084 0,102 0,119 0,17 Slotting >55HRC 0,002 0,005 0,008 0,02 0,025 0,028 0,042 0,05 0,06 0,08 RPM Formula For Metric - RPM = (Vc x 318,0) Endmill Ø Feedrate Formula For Metric - Feedrate = RPM x fz x Number Of Cutting Teeth 18

21 Technical Data FORDMAX Carbide Recommended Cutting Data Workpiece Material Group Steels Stainless Steels Cast Irons Special Alloys Hardened Steels P M K S H Material Type Coolant Max Air MMS Vc (m/min) Low Carbon l l l Medium Carbon l l l Alloy Steels l l l Die/Tool Steels l l l Free Machining l - q Austenitic l - q Difficult Stainless l - q PH Stainless l - q Cobalt Chrome Alloys l - q Duplex (22%) l - q Super Duplex (25%) l - q Grey Cast Iron l q q Ductile Cast Iron l q q Malleable Iron l q q High Temp Alloys l Inconel l Titanium Alloys l Hardened Steels Rc l q q Hardened Steels Rc l q q l Preferred q Possible - Not Possible 1 x D 0.5 x D 1 x D 1 x D 0.05 x D 2 x D 0.1 x D 2 x D 0.2 x D 2 x D 0.3 x D 1.5 x D 0.5 x D 1.5 x D Workpiece Material Group Steels Stainless Steels Cast Irons Special Alloys Hardened Steels P M K S H Material Type Low Carbon Medium Carbon Alloy Steels Die/Tool Steels Free Machining Austenitic Type of Machining Tool Diameter 6mm 8mm 10mm 12mm 16mm 20mm 25mm Feed/Tooth (fz - mm) Profiling 0,085 0,100 0,120 0,170 0,200 0,230 0,330 Slotting 0,043 0,050 0,060 0,085 0,100 0,125 0,165 Profiling 0,085 0,100 0,120 0,170 0,200 0,230 0,330 Difficult Stainless Slotting 0,043 0,050 0,060 0,085 0,100 0,125 0,165 PH Stainless Cobalt Chrome Alloys Duplex (22%) Super Duplex (25%) Grey Cast Iron Ductile Cast Iron Profiling 0,064 0,076 0,086 0,125 0,150 0,175 0,250 Slotting 0,032 0,038 0,045 0,060 0,075 0,085 0,125 Profiling 0,085 0,100 0,120 0,170 0,200 0,230 0,208 Malleable Iron Slotting 0,043 0,050 0,060 0,085 0,100 0,125 0,165 High Temp Alloys Titanium Alloys Hardened Steels Rc Hardened Steels Rc Profiling 0,043 0,050 0,060 0,085 0,100 0,120 0,165 Slotting 0,022 0,025 0,030 0,045 0,050 0,060 0,080 Profiling 0,085 0,100 0,120 0,170 0,200 0,230 0,330 Slotting 0,022 0,025 0,030 0,045 0,050 0,060 0,080 Profiling 0,076 0,090 0,100 0,150 0,180 0,200 0,300 Slotting 0,035 0,045 0,050 0,075 0,090 0,100 0,150 Profiling 0,053 0,066 0,076 0,100 0,132 0,155 0,220 Slotting 0,025 0,033 0,036 0,050 0,065 0,080 0,110 RPM Formula For Metric - RPM = (Vc x 318,0) Endmill Ø Feedrate Formula For Metric - Feedrate = RPM x fz x Number Of Cutting Teeth 19

22 Technical Data FORDMAX Carbide for Aluminium Recommended Cutting Data Material Group Workpiece Material Material Type Non Ferrous N Aluminium/Aluminium Alloys 10% Si Tool Diameter (mm) 6,0 8,0 10,0 12,0 16,0 Vc (m/min) Type Of Cut ap ae Feed/Tooth (fz - mm) 0,5 x D 1 x D ,06 0,08 0,09 0,12 0,17 Slotting 1 x D 1 x D ,05 0,07 0,08 0,10 0, x D 0,2 x D ,07 0,12 0,13 0,15 0,20 Profiling 1 x D 0,5 x D ,06 0,08 0,09 0,12 0,17 Tool Diameter (mm) 20,0 25,0 Vc (m/min) Type Of Cut ap ae Feed/Tooth (fz - mm) 134 Slotting Profiling 0,5 x D 1 x D ,20 0,25 1 x D 1 x D ,15 0,20 1 x D 0,2 x D ,22 0,28 1 x D 0,5 x D ,20 0,25 RPM Formula For Metric - RPM = (Vc x 318,0) Endmill Ø Feedrate Formula For Metric - Feedrate = RPM x fz x Number Of Cutting Teeth. GT2 GT3 & GT2B GT3B - Recommended Cutting Data Material Group Workpiece Material Material Type Non Ferrous N Aluminium/Aluminium Alloys Tool Diameter (mm) 3,0 4,0 5,0 6,0 8,0 Vc (m/min) Type Of Cut ap ae Feed/Tooth (fz - mm) GT2 & GT3 GT2B & GT3B Slotting 0.5 x D 1 x D ,02 0,03 0,04 0,05 0,07 Profiling 1 x D 0.2 x D ,03 0,045 0,06 0,075 0,105 1 x D 0.5 x D ,02 0,03 0,04 0,05 0,07 Tool Diameter (mm) 10,0 12,0 14,0 16,0 20,0 Vc (m/min) Type Of Cut ap ae Feed/Tooth (fz - mm) GT2 & GT3 GT2B & GT3B Slotting 0.5 x D 1 x D ,10 0,12 0,15 0,16 0,20 Profiling 1 x D 0,2 x D ,15 0,18 0,225 0,24 0,30 1 x D 0,5 x D ,10 0,12 0,15 0,16 0,20 RPM Formula For Metric - RPM = (Vc x 318,0) Endmill Ø Feedrate Formula For Metric - Feedrate = RPM x fz x Number Of Cutting Teeth 20

23 Page High Performance & General Purpose Twister Micro-Tuff Drill 305 Uncoated 305AM Coated Twister XD Spot Drill 200S When you need to drill holes, the M.A.Ford Twister drills have all the answers. Twister XD High Performance 3xD XD SSM, XD CSM 25 We have one of the most complete range of drills across the industry, from high-precision micro and circuit board drills up to to high performance, large diameter drills for machining aluminium, stainless steel and exotic alloys. Twister Performance 5xD HPDSR, HPDCR Twister XD High Performance 5xD XD SRM, XD CRM In addition, our ALtima and HP AlTiN coated high performance drills ensure that whatever your application we can provide the correct size, coating, drill length and specification to meet all of your hole making requirements. Twister XD High Performance 7xD XD CLM Twister XD High Performance 10xD Mirco MD CLM The range also incorporates our family of coolant fed drills, which allows coolant to be delivered right to the cutting edge, enabling you to increase speeds up to four times that of standard HSS drills and 1,5 times that of standard solid carbide drills. In addition, deeper holes can also be machined without peck drilling as a result of the improved coolant flow and swarf evacuation characteristics. Twister XD High Performance 12 + xd XD CEM Twister X-AL High Performance 3 Flute 5xD 229 Twister Micro Drill Uncoated Within the range you ll find centre drills, standard drills and specialised drills for composites alongside solid carbide drills in diameters ranging from 0,1mm to 20,00mm and coolant fed products from 2,0mm to 20,00mm. Twister Hi-Roc Drill 3xD 200 Twister Kevlar/Composite Drill 3xD Twister Hi-Tuff Drill 5xD 205 Twister Micro Drill Uncoated Drill Length 30 Helix Angle Solid Carbide Coatings Coolant Feed 6537L DIN Specs Drill Point Angle P01 Technical Information Twister Jobbers Drill 5xD 224 Twister Centre Drill Steel Cast Iron Twister 90º NC Spot Drill Workpiece Material Group Hardened Steels (35-65Rc) Stainless Steels Special Alloys Non-Ferrous Twister 120º NC Spot Drill Technical Information

24 Micro-Tuff Drill Uncoated Example Ordering Code - Select series number then add tool number. (example = 1,0mm Uncoated Micro-Tuff drill) Drill Dimensions 305 Drill Dimensions 305 Ø D¹ Ø D² L¹ L² Tool No Price 0,10 3,0 38,0 1, ,05 0, ,05 0, ,05 0, ,05 0,14 3,0 38,0 1, ,05 0,15 3,0 38,0 2, ,48 0, ,48 0, ,48 0, ,48 0, ,48 0, ,00 0, ,00 0, ,00 0, ,00 0,24 3,0 38,0 2, ,00 0,25 3,0 38,0 3, ,26 0, ,26 0, ,26 0, ,26 0,29 3,0 38,0 3, ,26 0,30 3,0 38,0 4, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0,40 3,0 38,0 4, ,79 0,41 3,0 38,0 6, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0,54 3,0 38,0 6, ,79 Ø D¹ Ø D² L¹ L² Tool No Price 0,55 3,0 38,0 6, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0,65 3,0 38,0 6, ,79 0,66 3,0 38,0 8, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0,75 3,0 38,0 8, ,79 0,76 3,0 38,0 10, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0, ,79 0,99 3,0 38,0 10, ,79 P50 Non-Stocked Standard - Delivery 3-5 Days 22

25 Micro-Tuff Drill Uncoated Example Ordering Code - Select series number then add tool number. (example = 1,0mm Uncoated Micro-Tuff drill) Drill Dimensions 305 Drill Dimensions 305 P50 Ø D¹ Ø D² L¹ L² Tool No Price 1,00 3,0 38,0 10, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1,55 3,0 38,0 10, ,79 1,60 3,0 38,0 12, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 1, ,79 2,00 3,0 38,0 12, ,79 Ø D¹ Ø D² L¹ L² Tool No Price 2,05 3,0 38,0 12, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 2, ,79 3,00 3,0 38,0 12, ,79 Non-Stocked Standard - Delivery 3-5 Days 23

26 Micro-Tuff Drill Micro 305AM Coated Example Ordering Code - Select series number then add tool number. (example AM = 1,0mm diameter Micro-Tuff drill) Drill Dimensions 305 Drill Dimensions 305 Ø D¹ Ø D² L¹ L² Tool No Price Ø D¹ Ø D² L¹ L² Tool No Price 0,10 3,0 38,0 1,7 0010AM 75,79 0,15 2,5 0015AM 44,21 0,20 2,5 0020AM 34,74 0,25 3,2 0025AM 30,00 0,30 4,8 0030AM 23,69 0, AM 23,69 0,40 4,8 0040AM 23,69 0,45 6,4 0045AM 23,69 0, AM 23,69 0, AM 23,69 0, AM 23,69 0,65 6,4 0065AM 23,69 0,70 8,1 0070AM 23,69 0,75 8,1 0075AM 23,69 0,80 10,2 0080AM 23,69 0, AM 23,69 0, AM 23,69 0, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1,55 3,0 38,0 10,2 0155AM 23, XD Spot Drill 1,60 3,0 38,0 12,2 0160AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 1, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 2, AM 23,69 3,00 3,0 38,0 12,2 0300AM 23,69 200S P50 Example Ordering Code - Select series number then add tool number. (example 200S 0600A = 6,0mm XD Spot Drill) Drill Dimensions 200S Ø D¹ Ø D² L¹ L² L 5 Price 3,00 3,0 38,0 16,0 0,4 0300A 25,21 6,00 6,0 51,0 19,0 0,8 0600A 46,19 8,00 8,0 64,0 19,0 1,1 0800A 66,80 10,00 10,0 70,0 25,0 1,4 1000A 105,26 12,00 12,0 76,0 25,0 1,7 1200A 136,30 16,00 16,0 89,0 32,0 2,2 1600A 209,85 P51 24

27 XD High Performance - 3xD An M.A.FORD Advanced Product Group XD SSM XD SSM, XD CSM XD CSM Example Ordering Code - Select series number then add tool number. (example 2XDSSM0600A = 6,0mm 3 x D Solid Carbide Drill) Drill Dimensions XD SSM 2XDSSM Drill Dimensions XD CSM 2XDCSM P52 Ø D¹ Ø D² L¹ L² L 3 Price Ø D² L¹ L² L 3 Price 2,50 2,5 43,0 14,0 11,0 0250A 30, ,90 2,9 46,0 16,0 12,0 0290A 32, ,00 3,0 57,0 16,0 13,0 0300A 42,93 3,0 57,0 16,0 13,0 0300A 62,04 3,10 4,0 63,0 22,0 18,0 0310A 42,93 4,0 63,0 22,0 18,0 0310A 62,04 3, A 44, A 63,83 3, A 44, A 63,83 3, A 44, A 63,83 3, A 44, A 63,83 3, A 44, A 63,83 3, A 44, A 63,83 3, A 44, A 63,83 3, A 44, A 63,83 4,00 4,0 63,0 22,0 18,0 0400A 44,96 4,0 63,0 22,0 18,0 0400A 63,83 4,10 5,0 63,0 26,0 21,0 0410A 49,08 5,0 63,0 26,0 21,0 0410A 66,46 4, A 49, A 66,46 4, A 49, A 66,46 4, A 49, A 66,46 4, A 49, A 66,46 4, A 49, A 66,46 4, A 49, A 66,46 4, A 49, A 66,46 4, A 49, A 66,46 5,00 5,0 63,0 26,0 21,0 0500A 49,08 5,0 63,0 26,0 21,0 0500A 66,46 5,10 6,0 76,0 30,0 24,0 0510A 57,65 6,0 66,0 28,0 20,0 0510A 68,63 5, A 57, A 68,63 5, A 57, A 68,63 5, A 57, A 68,63 5, A 57, A 68,63 5, A 57, A 68,63 5, A 57, A 68,63 5, A 57, A 68,63 6,00 6,0 76,0 30,0 24,0 0600A 57,65 6,0 66,0 28,0 20,0 0600A 68,63 6,10 8,0 82,0 35,0 28,0 0610A 67,38 8,0 79,0 34,0 24,0 0610A 76,30 6, A 67, A 76,30 6, A 67, A 76,30 6, A 67, A 76,30 6, A 67, A 76,30 6, A 67, A 76,30 6, A 67, A 76,30 6, A 67, A 76,30 6, A 67, A 76,30 7,00 8,0 82,0 35,0 28,0 0700A 67,38 8,0 79,0 34,0 24,0 0700A 76,30 7,10 8,0 82,0 38,0 31,0 0710A 69,71 8,0 79,0 41,0 29,0 0710A 90,46 7, A 69, A 90,46 7,30 8,0 82,0 38,0 31,0 0730A 69,71 8,0 79,0 41,0 29,0 0730A 90,46 Non-Stocked Standard - Delivery 3-5 Days 25

28 XD High Performance - 3xD An M.A.FORD Advanced Product Group XD SSM XD SSM, XD CSM XD CSM Example Ordering Code - Select series number then add tool number. (example 2XDSSM0800A = 8,0mm 3 x D Solid Carbide Drill) Drill Dimensions XD SSM 2XDSSM Drill Dimensions XD CSM 2XDCSM Ø D¹ Ø D² L¹ L² L 3 Price Ø D² L¹ L² L 3 Price 7,40 8,0 82,0 38,0 31,0 0740A 69,71 8,0 79,0 41,0 29,0 0740A 90,46 7, A 69, A 90,46 7, A 69, A 90,46 7,70 8,0 82,0 38,0 31,0 0770A 69,71 8,0 79,0 41,0 29,0 0770A 90,46 7,80 8,0 89,0 43,0 35,0 0780A 69,71 8,0 79,0 41,0 29,0 0780A 90,46 7, A 69, A 90,46 8,00 8,0 89,0 43,0 35,0 0800A 69,71 8,0 79,0 41,0 29,0 0800A 90,46 8,10 10,0 89,0 43,0 35,0 0810A 87,91 10,0 89,0 47,0 35,0 0810A 105,49 8, A 87, A 105,49 8, A 87, A 105,49 8, A 87, A 105,49 8, A 87, A 105,49 8, A 87, A 105,49 8, A 87, A 105,49 8, A 87, A 105,49 8, A 87, A 105,49 9, A 87, A 105,49 9, A 91, A 126,16 9, A 91, A 126,16 9, A 91, A 126,16 9, A 91, A 126,16 9, A 91, A 126,16 9, A 91, A 126,16 9, A 91, A 126,16 9, A 91, A 126,16 9, A 91, A 126,16 9, A 91, A 126,16 10,00 10,0 89,0 43,0 35,0 1000A 91,40 10,0 89,0 47,0 35,0 1000A 126,16 10,10 12,0 101,0 51,0 41,0 1010A 122,69 12,0 102,0 55,0 40,0 1010A 155,08 10, A 122, A 155,08 10, A 122, A 155,08 10, A 122, A 155,08 10, A 122, A 155,08 10, A 122, A 155,08 10, A 122, A 155,08 10, A 122, A 155,08 10, A 122, A 155,08 11, A 122, A 155,08 11, A 128, A 169,54 11, A 128, A 169,54 11, A 128, A 169,54 11, A 128, A 169,54 11, A 128, A 169,54 11, A 128, A 169,54 11,70 12,0 101,0 51,0 41,0 1170A 128,80 12,0 102,0 55,0 40,0 1170A 169,54 Non-Stocked Standard - Delivery 3-5 Days P52 26

29 XD High Performance - 3xD An M.A.FORD Advanced Product Group XD SSM XD SSM, XD CSM XD CSM Example Ordering Code - Select series number then add tool number. (example 2XDSSM1600A =16,0mm 3 x D Solid Carbide Drill) Drill Dimensions XD SSM 2XDSSM Drill Dimensions XD CSM 2XDCSM P52 Ø D¹ Ø D² L¹ L² L 3 Price Ø D² L¹ L² L 3 Price 11,80 12,0 101,0 51,0 41,0 1180A 128,80 12,0 102,0 55,0 40,0 1180A 169,54 11, A 128, A 169,54 12,00 12,0 101,0 51,0 41,0 1200A 128,80 12,0 102,0 55,0 40,0 1200A 169,54 12,10 14,0 107,0 54,0 43,0 1210A 162,34 14,0 107,0 60,0 43,0 1210A 197,66 12, A 162, A 197,66 12,80 14,0 107,0 54,0 43,0 1280A 162, A 197,66 12, A o 14,0 107,0 60,0 43,0 1283A o 12,90 14,0 107,0 54,0 43,0 1290A 162,34 14,0 107,0 60,0 43,0 1290A 197,66 13, A 162, A 197,66 13, A 162, A 233,49 13, A 162, A 233,49 14,00 14,0 107,0 54,0 43,0 1400A 162,34 14,0 107,0 60,0 43,0 1400A 233,49 14,50 16,0 117,0 60,0 48,0 1450A 210,60 16,0 115,0 65,0 45,0 1450A 238,51 14, A 210, A 238,51 15, A 210, A 238,51 15, A 210, A 260,69 15, A 210, A 260,69 15, A 210, A 260,69 16,00 16,0 117,0 60,0 48,0 1600A 210,60 16,0 115,0 65,0 45,0 1600A 260,69 16,08 18,0 122,0 63,0 51,0 1608A 249,44 16, A 249,44 16, A 249,44 17, A 249,44 17, A 249,44 18,00 18,0 122,0 63,0 51,0 1800A 265,81 18,50 20,0 133,0 70,0 56,0 1850A 265,81 19, A 265,81 19, A 265,81 19, A 265,81 19, A 265,81 20,00 20,0 133,0 70,0 56,0 2000A 265,81 Non-Stocked Standard - Delivery 3-5 Days 27

30 Performance - 5xD HPDSR HP ALTiN 6537L 4,1-16,0mm HPDSR, HPDCR HPDCR HP ALTiN 6537L 4,1-16,0mm Example Ordering Code - Select series number then add tool number. (example HPDSR 0600A = 6,0mm 5 x D Solid Carbide Drill) Drill Dimensions HPDSR HPDCR Ø D¹ Ø D² L¹ L² L 3 Price Price 3,00 3,0 66,0 28,0 23,0 0300A 37, A 54,00 3,10 4,0 0310A 37, A 54,00 3, A 37, A 54,00 3, A 37, A 54,00 3, A 37, A 54,00 3, A 37, A 54,00 3, A 37, A 54,00 3,70 66,0 28,0 23,0 0370A 37, A 54,00 3,80 74,0 36,0 29,0 0380A 37, A 54,00 3, A 37, A 54,00 4,00 4,0 0400A 37, A 54,00 4,10 6,0 0410A 37, A 57,38 4, A 37, A 57,38 4, A 37, A 57,38 4, A 37, A 57,38 4, A 37, A 57,38 4, A 37, A 57,38 4,70 74,0 36,0 29,0 0470A 37, A 57,38 4,80 82,0 44,0 35,0 0480A 37, A 57,38 4, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 5, A 37, A 57,38 6,00 6,0 82,0 44,0 35,0 0600A 37, A 57,38 6,10 8,0 91,0 53,0 43,0 0610A 38, A 64,13 6, A 38, A 64,13 6, A 38, A 64,13 6, A 38, A 64,13 6, A 38, A 64,13 6, A 38, A 64,13 6, A 38, A 64,13 6, A 38, A 64,13 6, A 38, A 64,13 7, A 38, A 64,13 7, A 38, A 64,13 7, A 38, A 64,13 7, A 38, A 64,13 7,40 8,0 91,0 53,0 43,0 0740A 38, A 64,13 P54 28

31 Performance - 5xD HPDSR HP ALTiN 6537L 4,1-16,0mm HPDSR, HPDCR HPDCR HP ALTiN 6537L 4,1-16,0mm Example Ordering Code - Select series number then add tool number. (example HPDSR 0800A = 8,0mm 5 x D Solid Carbide Drill) HPDSR HPDCR P54 Ø D¹ Ø D² L¹ L² L 3 Price Price 7,50 8,0 91,0 53,0 43,0 0750A 38, A 64,13 7,60 8,0 91,0 53,0 43,0 0760A 38, A 64,13 7, A 38, A 64,13 7, A 38, A 64,13 7, A 38, A 64,13 8,00 8,0 91,0 53,0 43,0 0800A 38, A 64,13 8,10 10,0 103,0 61,0 49,0 0810A 42, A 73,13 8, A 42, A 73,13 8, A 42, A 73,13 8, A 42, A 73,13 8, A 42, A 73,13 8, A 42, A 73,13 8, A 42, A 73,13 8, A 42, A 73,13 8, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 9, A 42, A 73,13 10,00 10,0 103,0 61,0 49,0 1000A 42, A 73,13 10,10 12,0 118,0 71,0 56,0 1010A 63, A 106,88 10, A 63, A 106,88 10, A 63, A 106,88 10, A 63, A 106,88 10, A 63, A 106,88 10, A 63, A 106,88 10, A 63, A 106,88 10, A 63, A 106,88 10, A 63, A 106,88 11, A 63, A 106,88 11, A 63, A 106,88 11, A 63, A 106,88 11, A 63, A 106,88 11, A 63, A 106,88 11, A 63, A 106,88 11, A 63, A 106,88 11, A 63, A 106,88 11, A 63, A 106,88 11,90 12,0 118,0 71,0 56,0 1190A 63, A 106,88 29

32 Performance - 5xD HPDSR HP ALTiN 6537L 4,1-16,0mm HPDSR, HPDCR HPDCR HP ALTiN 6537L 4,1-16,0mm Example Ordering Code - Select series number then add tool umber. (example HPDSR 1200A = 12,0mm 5 x D Solid Carbide Drill) HPDSR HPDCR Ø D¹ Ø D² L¹ L² L 3 Price Price 12,00 12,0 118,0 71,0 56,0 1200A 63, A 106,88 12,10 14,0 124,0 77,0 60,0 1210A 83, A 143,75 12, A 83, A 143,75 12, A 83, A 143,75 12, A 83, A 143,75 12, A 83, A 143,75 12, A 83, A 143,75 12, A 83, A 143,75 12, A 83, A 143,75 12, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 13, A 83, A 143,75 14,00 14,0 124,0 77,0 60,0 1400A 83, A 143,75 14,10 16,0 133,0 83,0 63,0 1410A 108, A 178,75 14, A 108, A 178,75 14, A 108, A 178,75 14, A 108, A 178,75 14, A 108, A 178,75 14, A 108, A 178,75 14, A 108, A 178,75 14, A 108, A 178,75 14, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 15, A 108, A 178,75 16,00 16,0 133,0 83,0 63,0 1600A 108, A 178,75 P54 30

33 XD High Performance - 5xD An M.A.FORD Advanced Product Group XD SRM XD SRM, XD CRM XD CRM Example Ordering Code - Select series number then add tool number. (example 2XDSRM0300A = 3,0mm 5 x D Solid Carbide Drill) Drill Dimensions 2XDSRM Drill Dimensions XD CRM 2XDCRM P52 Ø D¹ Ø D² L¹ L² L 3 Price Ø D² L¹ L² L 3 Price 0,50 0,5 26,0 6,0 5,0 0050A 26, ,60 0,6 26,0 7,0 5,0 0060A 26, ,65 0,65 26,0 8,0 6,0 0065A 26, ,95 0,95 32,0 11,0 8,0 0095A 28, ,00 1,0 34,0 12,0 9,0 0100A 28, ,05 1,05 34,0 12,0 9,0 0105A 28, ,25 1,25 38,0 16,0 12,0 0125A 28, ,50 1,5 40,0 18,0 14,0 0150A 28, ,60 1,6 43,0 20,0 15,0 0160A 28, ,80 1,8 46,0 22,0 17,0 0180A 30, ,90 1,9 46,0 22,0 17,0 0190A 30, ,00 2,0 49,0 24,0 18,0 0200A 30, ,05 2,05 49,0 24,0 18,0 0205A 34, ,30 2,3 53,0 27,0 20,0 0230A 34, ,40 2,4 57,0 30,0 23,0 0240A 34, ,50 2,5 57,0 30,0 23,0 0250A 34, ,90 2,9 61,0 33,0 25,0 0290A 39, ,00 3,0 63,0 24,0 19,0 0300A 47,04 3,0 75,0 24,0 19,0 0300A 74,44 3,10 4,0 69,0 32,0 26,0 0310A 47,04 4,0 80,0 32,0 26,0 0310A 76,55 3, A 51, A 76,55 3, A 51, A 76,55 3, A 51, A 76,55 3, A 51, A 76,55 3, A 51, A 76,55 3, A 51, A 76,55 3, A 51, A 76,55 3, A 51, A 76,55 4,00 4,0 69,0 32,0 26,0 0400A 51,11 4,0 80,0 32,0 26,0 0400A 76,55 4,10 5,0 80,0 38,0 30,0 0410A 59,28 5,0 82,0 38,0 30,0 0410A 79,73 4, A 59, A 79,73 4, A 59, A 79,73 4, A 59, A 79,73 4, A 59, A 79,73 4, A 59, A 79,73 4, A 59, A 79,73 4, A 59, A 79,73 4, A 59, A 79,73 5,00 5,0 80,0 38,0 30,0 0500A 59,28 5,0 82,0 38,0 30,0 0500A 79,73 5,10 6,0 82,0 40,0 32,0 0510A 63,39 6,0 82,0 40,0 32,0 0510A 82,30 5, A 63, A 82,30 5, A 63, A 82,30 5, A 63, A 82,30 5, A 63, A 82,30 5, A 63, A 82,30 5,80 6,0 82,0 40,0 32,0 0580A 63,39 6,0 82,0 40,0 32,0 0580A 82,30 31

34 XD High Performance - 5xD An M.A.FORD Advanced Product Group XD SRM XD SRM, XD CRM XD CRM Example Ordering Code - Select series number then add tool number. (example 2XDSRM0750A =7,5mm 5 x D Solid Carbide Drill) Drill Dimensions 2XDSRM Drill Dimensions 2XDCRM Ø D¹ Ø D² L¹ L² L 3 Price Ø D² L¹ L² L 3 Price 5,90 6,0 82,0 40,0 32,0 0590A 63,39 6,0 82,0 40,0 32,0 0590A 82,30 6,00 6,0 82,0 40,0 32,0 0600A 63,39 6,0 82,0 40,0 32,0 0600A 82,30 6,10 8,0 91,0 48,0 38,0 0610A 73,60 8,0 91,0 48,0 38,0 0610A 91,51 6, A 73, A 91,51 6, A 73, A 91,51 6, A 73, A 91,51 6, A 73, A 91,51 6, A 73, A 91,51 6, A 73, A 91,51 6, A 73, A 91,51 6, A 73, A 91,51 7, A 73, A 91,51 7, A 85, A 108,58 7, A 85, A 108,58 7, A 85, A 108,58 7, A 85, A 108,58 7, A 85, A 108,58 7, A 85, A 108,58 7, A 85, A 108,58 7, A 85, A 108,58 7, A 85, A 108,58 8,00 8,0 91,0 48,0 38,0 0800A 85,45 8,0 91,0 48,0 38,0 0800A 108,58 8,10 10,0 103,0 55,0 44,0 0810A 110,63 10,0 103,0 55,0 44,0 0810A 126,56 8, A 110, A 126,56 8, A 110, A 126,56 8, A 110, A 126,56 8, A 110, A 126,56 8, A 110, A 126,56 8, A 110, A 126,56 8, A 110, A 126,56 8, A 110, A 126,56 9, A 110, A 126,56 9, A 110, A 151,30 9, A 110, A 151,30 9, A 110, A 151,30 9, A 110, A 151,30 9, A 110, A 151,30 9, A 110, A 151,30 9, A 110, A 151,30 9, A 110, A 151,30 9, A 110, A 151,30 9, A 110, A 151,30 10,00 10,0 103,0 55,0 44,0 1000A 110,63 10,0 103,0 55,0 44,0 1000A 151,30 10,10 12,0 120,0 60,0 48,0 1010A 140,78 12,0 120,0 60,0 48,0 1010A 186,06 10,20 12,0 120,0 60,0 48,0 1020A 140,78 12,0 120,0 60,0 48,0 1020A 186,06 P52 32

35 XD High Performance - 5xD An M.A.FORD Advanced Product Group XD SRM XD SRM, XD CRM XD CRM Example Ordering Code - Select series number then add tool number. (example 2XDSRM1200A = 12,0mm 5 x D Solid Carbide Drill) Drill Dimensions 2XDSRM Drill Dimensions 2XDCRM P52 Ø D¹ Ø D² L¹ L² L 3 Price Ø D² L¹ L² L 3 Price 10,30 12,0 120,0 60,0 48,0 1030A 140,78 12,0 120,0 60,0 48,0 1030A 186,06 10, A 140, A 186,06 10, A 140, A 186,06 10, A 140, A 186,06 10,70 12,0 120,0 60,0 48,0 1070A 140,78 12,0 120,0 60,0 48,0 1070A 186,06 10,80 12,0 120,0 60,0 48,0 1080A 140,78 12,0 120,0 60,0 48,0 1080A 186,06 10, A 140, A 186,06 11, A 140,78 12,0 120,0 60,0 48,0 1100A 186,06 11, A 162,45 12,0 120,0 66,0 53,0 1110A 203,44 11, A 162, A 203,44 11, A 162, A 203,44 11, A 162, A 203,44 11, A 162, A 203,44 11, A 162, A 203,44 11, A 162, A 203,44 11, A 162, A 203,44 11, A 162, A 203,44 12,00 12,0 120,0 66,0 53,0 1200A 162,45 12,0 120,0 66,0 53,0 1200A 203,44 12,10 14,0 126,0 72,0 58,0 1210A 196,29 14,0 126,0 72,0 58,0 1210A 237,19 12, A 196, A 237,19 12, A 196, A 237,19 12, A 196, A 237,19 13,00 14,0 126,0 72,0 58,0 1300A 196,29 14,0 126,0 72,0 58,0 1300A 237,19 13,50 14,0 134,0 77,0 62,0 1350A 204,46 14,0 134,0 77,0 62,0 1350A 280,11 13, A 204, A 280,11 14,00 14,0 134,0 77,0 62,0 1400A 204,46 14,0 134,0 77,0 62,0 1400A 280,11 14,50 16,0 140,0 80,0 64,0 1450A 241,28 16,0 140,0 80,0 64,0 1450A 286,25 14, A 241, A 286,25 15,00 16,0 140,0 80,0 64,0 1500A 241,28 16,0 140,0 80,0 64,0 1500A 286,25 15,30 16,0 146,0 82,0 66,0 1530A 241,28 16,0 146,0 82,0 66,0 1530A 312,83 15, A 241, A 312,83 15, A 241, A 312,83 16,00 16,0 146,0 82,0 66,0 1600A 241,28 16,0 146,0 82,0 66,0 1600A 312,83 16, ,0 158,0 90,0 72,0 1608A 361,90 16, A 361,90 16, A 361,90 17, ,0 158,0 90,0 72,0 1700A 361,90 17, ,0 158,0 95,0 76,0 1750A 398,73 18, ,0 158,0 95,0 76,0 1800A 398,73 18, ,0 160,0 100,0 80,0 1850A 445,73 19, A 445,73 19, A 445,73 19, A 445,73 19, A 445,73 20, ,0 160,0 100,0 80,0 2000A 445,73 33

36 7 + XD High Performance xd XD CLM An M.A.FORD Advanced Product Group Example Ordering Code-Select series number then add tool number. (Example 2XDCLM0580A = 5,8mm 7 x D Coolant Drill) Drill Dimensions XD CLM 2XDCLM Ø D¹ Ø D² L¹ L² L 3 Price 3,00 3,0 81,0 33,0 26,0 0300A 81,80 3,10 4,0 92,0 44,0 35,0 0310A 85,88 3, A 85,88 3, A 85,88 3, A 85,88 3, A 85,88 3, A 85,88 3, A 85,88 3, A 85,88 3, A 85,88 4,00 4,0 92,0 44,0 35,0 0400A 85,88 4,10 5,0 100,0 45,0 36,0 0410A 94,05 4, A 94,05 4, A 94,05 4, A 94,05 4, A 94,05 4, A 94,05 4, A 94,05 4, A 94,05 4, A 94,05 5,00 5,0 100,0 45,0 36,0 0500A 94,05 5,10 6,0 100,0 51,0 41,0 0510A 102,24 5, A 102,24 5, A 102,24 5, A 102,24 5, A 102,24 5, A 102,24 5, A 102,24 5, A 102,24 6,00 6,0 100,0 51,0 41,0 0600A 102,24 6,10 8,0 109,0 60,0 48,0 0610A 117,78 6, A 117,78 6, A 117,78 6, A 117,78 6, A 117,78 6, A 117,78 6, A 117,78 6, A 117,78 6, A 117,78 7,00 8,0 109,0 60,0 48,0 0700A 117,78 7,10 8,0 118,0 70,0 56,0 0710A 134,94 7, A 134,94 7, A 134,94 7, A 134,94 7,50 8,0 118,0 70,0 56,0 0750A 134,94 P52 34

37 7 + XD High Performance xd XD CLM An M.A.FORD Advanced Product Group Example Ordering Code -Select series number then add tool number. (Example 2XDCLM0850A = 8,5mm 7 x D Coolant Drill) Drill Dimensions XD CLM 2XDCLM P52 Ø D¹ Ø D² L¹ L² L 3 Price 7,60 8,0 118,0 70,0 56,0 0760A 134,94 7,70 8,0 118,0 70,0 56,0 0770A 134,94 7,80 8,0 118,0 70,0 56,0 0780A 134,94 7, A 134,94 8,00 8,0 118,0 70,0 56,0 0800A 134,94 8,10 10,0 127,0 80,0 64,0 0810A 167,66 8, A 167,66 8, A 167,66 8, A 167,66 8, A 167,66 8, A 167,66 8, A 167,66 8, A 167,66 8, A 167,66 9,00 10,0 127,0 80,0 64,0 0900A 167,66 9,10 10,0 136,0 85,0 68,0 0910A 195,26 9, A 195,26 9, A 195,26 9, A 195,26 9, A 195,26 9, A 195,26 9, A 195,26 9, A 195,26 9, A 195,26 9, A 195,26 10,00 10,0 136,0 85,0 68,0 1000A 195,26 10,10 12,0 149,0 93,0 74,0 1010A 220,83 10, A 220,83 10, A 220,83 10, A 220,83 10, A 220,83 10, A 220,83 10, A 220,83 10, A 220,83 10, A 220,83 11,00 12,0 149,0 93,0 74,0 1100A 220,83 11,10 12,0 155,0 102,0 82,0 1110A 258,15 11, A 258,15 11, A 258,15 11, A 258,15 11, A 258,15 11, A 258,15 11, A 258,15 11, A 258,15 11, A 258,15 12,00 12,0 155,0 102,0 82,0 1200A 258,15 35

38 10 XD High Performance - 10xD Micro MD CLM An M.A.FORD Advanced Product Group Example Ordering Code -Select series number then add tool number. (Example 2MDCLM0260A = 2,6mm 10 x D Coolant Drill) Drill Dimensions MD CLM 2MDCLM Ø D¹ Ø D² L¹ L² L 3 Price 2,00 3,0 68,0 24,0 18,0 0200A 99,33 2,05 3,0 74,0 28,0 21,0 0205A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2,50 3,0 74,0 28,0 21,0 0250A 99,33 2,55 3,0 81,0 34,0 25,5 0255A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2, A 99,33 2,95 3,0 81,0 34,0 25,5 0295A 99,33 P52/53 Tolerances Drill Dia. (h8) Tolerance 2,0-2,95 +0/-,014 Shank Dia. (h6) Tolerance 3,0 +0/-,006 Machine Requirements High Pressure Pump System (1000 psi) Coolant filtration of 10 microns or better Machine runout of,0004 (,01mm) Max. M.A.Ford does not recommend full retraction of the body of the drill from the hole during the peck cycle. It is recommended to leave the drill point within the hole. Estimated Peck Depths For hole depths up to 6x diameter No pecks For hole depths up to 10x diameter 0-2 pecks For hole depths up to 15x diameter 2-4 pecks For hole depths deeper than 4x the diameter, M.A.Ford recommends using a soft start program that drills to,5x diameter deep at 2/3 of the speed and feed. 36

39 12 + XD High Performance xd XD CEM An M.A.FORD Advanced Product Group 4 Example Ordering Code -Select series number then add tool number. (example 2XDCEM0850A = 8,5mm 12+ x D Coolant Drill) Drill Dimensions 2XDCEM Ø D¹ Ø D² L¹ L² L 3 L² / D¹ (D¹ x Ø) L³ / D¹ (D¹ x Ø) Price P55/56 4,00 4,0 163,0 100,0 80, A 340,94 4,20 5,0 163,0 105,0 84, A 367,08 4, A 367,08 4, A 367,08 4, A 367,08 4, A 4, A 376,69 4, A 376,69 5,00 5,0 163,0 105,0 84, A 376,69 5,20 6,0 163,0 110,0 88, A 356,41 5, A 356,41 5, A 356,41 5, A 356,41 6,00 6,0 163,0 110,0 88, A 356,41 6,20 8,0 163,0 110,0 88, A 328,49 6, A 328,49 6, A 6, A 328,49 7,00 8,0 163,0 110,0 88, A 328,49 7,60 8,0 163,0 120,0 96, A 379,45 7, A 379,45 7, A 8,00 8,0 163,0 120,0 96, A 379,45 8,20 10,0 180,0 135,0 108, A 473,30 8, A 473,30 8, A 473,30 9,00 10,0 180,0 135,0 108, A 473,30 9,40 10,0 195,0 150,0 120, A 473,30 9, A 9, A 473,30 10,00 10,0 195,0 150,0 120, A 473,30 10,30 12,0 210,0 160,0 128, A 428,28 10, A 428,28 10, A 428,28 11, A 428,28 11, A 11, A 428,28 11, A 428,28 12,00 12,0 210,0 160,0 128, A 428,28 12,70 14,0 230,0 180,0 144, A 428,28 Non-Stocked Standard - Delivery 3-5 Days 37

40 X-AL High Performance 3 Flute - 4-5xD L 229 D2 h6 L1 L L3 D1 m7 Example Ordering Code - Select series number then add tool number. (Example = 4,0mm 5 x D Drill) Drill Dimensions 229 Drill Dimensions 229 Ø D¹ (m 7 ) Ø D² L¹ L² L 3 Price Ø D¹ (m 7 ) Ø D² L¹ L² L 3 Price 2,00 2,0 38,0 16,0 12, ,79 7,00 8,0 91,0 53,0 43, ,26 2,30 2,3 43,0 20,0 15, ,79 7, ,26 2,50 2,5 43,0 20,0 15, ,79 7, ,26 2,90 2,9 46,0 25,0 19, ,79 7, ,26 3,00 6,0 66,0 28,0 23, ,79 7, ,26 3, ,79 7, ,26 3, ,79 8,00 8,0 91,0 53,0 43, ,26 3, ,79 8,10 10,0 103,0 61,0 49, ,74 3, ,79 8, ,74 3, ,79 8, ,74 3, ,79 9, ,74 3,70 6,0 66,0 28,0 23, ,79 9, ,74 3,80 6,0 74,0 36,0 29, ,79 9, ,74 3, ,79 10,00 10,0 103,0 61,0 49, ,74 4, ,79 10,20 12,0 118,0 71,0 56, ,74 4, ,79 10, ,74 4, ,79 10, ,74 4, ,79 10, ,74 4, ,79 11, ,74 4,60 6,0 74,0 36,0 29, ,79 11, ,74 4,80 6,0 82,0 44,0 35, ,79 12,00 12,0 118,0 71,0 56, ,74 4, ,79 12,50 14,0 124,0 77,0 60, ,16 5, ,79 12, ,16 5, ,79 13, ,16 5, ,79 13, ,16 5, ,79 14,00 14,0 124,0 77,0 60, ,16 6,00 6,0 82,0 44,0 35, ,79 14,50 16,0 133,0 83,0 63, ,00 6,20 8,0 91,0 53,0 43, ,26 15, ,00 6, ,26 15, ,00 6, ,26 15, ,00 6,80 8,0 91,0 53,0 43, ,26 16,00 16,0 133,0 83,0 63, ,00 P56 38

41 Micro Drill Uncoated Example Ordering Code - Select series number then add tool number. (Example = 1,0mm Uncoated Micro Drill) Drill Dimensions 302 Drill Dimensions 302 Ø D¹ Ø D² L 1 L 2 Tool No Price Ø D¹ Ø D² L 1 L 2 Tool No Price P57 0,10 3,175 38,1 1, ,07 1,20 3,175 38,1 10, ,45 0,15 2, ,13 1, ,45 0,20 3, ,83 1, ,45 0,25 3, ,04 1, ,45 0,30 5, ,98 1, ,45 0,35 5, ,74 1, ,45 0,35 6, ,09 1, ,45 0,40 5, ,43 1, ,45 0,40 6, ,74 1, ,45 0,45 5, ,43 1, ,45 0,45 6, ,74 1, ,45 0,45 8, ,76 1, ,45 0,50 5, ,45 1, ,45 0,50 6, ,58 1, ,45 0,50 8, ,67 1, ,45 0,55 5, ,45 1, ,45 0,55 6, ,58 2, ,45 0,55 8, ,67 2, ,45 0,60 5, ,45 2, ,45 0,60 6, ,58 2, ,45 0,60 8, ,67 2, ,45 0,65 5, ,45 2, ,45 0,65 6, ,58 2, ,45 0,65 8, ,67 2, ,34 0,70 6, ,45 2, ,34 0,70 8, ,58 2, ,34 0,70 10, ,58 2, ,34 0,75 6, ,45 2, ,34 0,75 8, ,58 2, ,34 0,75 10, ,58 2, ,34 0,80 6, ,45 2, ,34 0,80 10, ,58 2, ,34 0,85 6, ,45 2, ,34 0,85 10, ,58 2, ,34 0, ,45 2, ,34 0, ,45 2, ,34 1, ,45 3, ,34 1, ,45 3, ,34 1, ,45 3, ,34 1,15 3,175 38,1 10, ,45 3,15 3,175 38,1 10, ,97 Non-Stocked Standard - Delivery 3-5 Days 39

42 3 Hi-Roc Drill - 3xD RC 200 D Example Ordering Code -Select series number then add tool number. (Example = 4,0mm Hi Roc Drill) L 2 L 1 Drill Dimensions 200 Drill Dimensions 200 Ø D L² L¹ Tool No Price Ø D L² L¹ Tool No Price 0,80 5,0 38, ,32 4,60 16,0 51, ,21 0,85 5, ,52 4, ,70 0,90 5, ,52 4, ,87 0,95 6, ,52 4,90 16, ,06 1,00 6, ,82 5,00 19, ,34 1, ,62 5, ,34 1, ,62 5, ,93 1,15 6, ,62 5, ,13 1,20 8, ,62 5, ,31 1, ,62 5, ,02 1, ,62 5,60 19,0 51, ,09 1, ,62 5,70 19,0 51, ,38 1, ,62 5, ,38 1, ,62 5, ,38 1, ,62 6, ,62 1,60 8, ,62 6, ,21 1,70 9, ,62 6, ,28 1, ,62 6, ,67 1, ,62 6, ,84 2,00 9, ,62 6,50 19,0 51, ,84 2,10 12, ,62 6,60 19,0 64, ,07 2, ,62 6, ,16 2, ,62 6, ,75 2, ,99 6, ,84 2,50 12, ,99 7, ,71 2,60 16, ,99 7, ,81 2, ,18 7, ,59 2, ,37 7, ,77 2, ,49 7, ,07 3, ,78 7, ,75 3, ,78 7, ,25 3, ,78 7, ,65 3,30 38, ,84 7, ,03 3,40 51, ,84 7, ,31 3, ,84 8, ,57 3, ,33 8,10 19,0 64, ,55 3, ,38 8,20 25,5 64, ,59 3, ,59 8, ,31 3, ,08 8, ,46 4, ,04 8, ,25 4, ,34 8, ,25 4, ,34 8, ,64 4, ,44 8, ,02 4, ,74 8, ,59 4,50 16,0 51, ,82 9,00 25,5 64, ,70 P58 40

43 3 Hi-Roc Drill - 3xD RC 200 D Example Ordering Code - Select series number then add tool number. (example = 9,5mm Hi Roc Drill) L 2 L 1 Drill Dimensions 200 Drill Dimensions 200 P58 Ø D L² L¹ Tool No Price Ø D L² L¹ Tool No Price 9,10 25,5 64, ,89 11,40 25,5 76, ,83 9, ,38 11, ,13 9, ,57 11, ,43 9, ,96 11, ,81 9, ,34 11, ,00 9,60 25,5 64, ,57 11, ,19 9,70 25,5 70, ,17 12, ,60 9, ,64 12,50 25,5 76, ,60 9, ,91 13,00 28,5 89, ,90 10, ,73 13, ,83 10, ,73 14,00 28,5 89, ,73 10, ,73 14,50 32,0 89, ,55 10, ,73 15, ,42 10, ,27 15, ,30 10, ,12 16,00 32,0 89, ,30 10, ,46 16,50 38,0 102, ,25 10, ,38 17, ,02 10, ,52 17, ,86 10, ,74 18, ,76 11, ,19 18, ,53 11, ,19 19, ,24 11,20 25,5 70, ,85 20,00 38,0 102, ,56 11,30 25,5 76, ,56 41

44 3 35 Kevlar/Composite Drill - 3xD 207 D Example Ordering Code - Select series number then add tool number. (Example = 4,0mm Kevlar Drill) L1 L2 Drill Dimensions 207 Drill Dimensions 207 Ø D L² L¹ Tool No Price Ø D L² L¹ Tool No Price 2,40 12,5 44, ,92 5,10 25,5 57, ,06 2,50 46, ,42 5,20 27,0 60, ,58 2, ,42 5, ,01 2,70 12,5 46, ,42 5, ,42 2,80 16,0 48, ,68 5,50 27,0 60, ,64 2, ,68 5,60 28,5 62, ,94 3, ,68 5, ,37 3, ,68 5, ,76 3,20 16,0 48, ,26 5,90 28,5 62, ,19 3,30 17,5 49, ,40 6,00 32,0 64, ,36 3, ,62 6, ,77 3, ,83 6, ,99 3,60 17,5 49, ,25 6, ,62 3,70 19,0 52, ,76 6,40 32,0 64, ,13 3, ,87 6,50 33,5 67, ,61 3,90 19,0 52, ,29 7,00 35,0 68, ,72 4,00 22,0 54, ,45 7,50 35,0 70, ,98 4, ,95 8,00 38,0 71, ,97 4, ,28 8,50 39,5 75, ,49 4,30 22,0 54, ,60 9,00 39,5 78, ,18 4,40 24,0 56, ,63 9,50 41,5 79, ,77 4, ,94 10,00 44,5 84, ,74 4, ,57 10,50 46,0 86, ,07 4,70 24,0 56, ,09 11,00 47,5 87, ,19 4,80 25,5 57, ,50 11,50 51,0 92, ,74 4, ,02 12,00 54,0 94, ,24 5,00 25,5 57, ,76 P59 42

45 Hi-Tuff Drill - 5xD D Example Ordering Code -Select series number then add tool number. (example = 4,0mm Hi Tuff Drill) L1 L2 P59 Drill Dimensions 205 Drill Dimensions 205 Ø D L² L¹ Tool No Price Ø D L² L¹ Tool No Price 0,30 5,0 38, ,01 3,60 24,0 49, ,61 0, ,01 3,70 25,5 52, ,02 0, ,01 3, ,10 0,45 5, ,01 3,90 25,5 52, ,38 0,50 6, ,01 4,00 27,0 54, ,17 0, ,01 4, ,76 0,60 6, ,01 4, ,04 0,65 8, ,01 4,30 27,0 54, ,23 0, ,52 4,40 28,5 56, ,93 0,75 8, ,52 4, ,31 0,80 9, ,52 4,60 28,5 56, ,91 0,85 9, ,42 4,70 30,0 57, ,17 0,90 11, ,42 4, ,57 0,95 11, ,42 4, ,17 1,00 12, ,83 5,00 30,0 57, ,56 1, ,83 5,10 30,0 57, ,86 1, ,83 5,20 32,0 60, ,21 1, ,83 5, ,34 1,20 12,5 38, ,83 5, ,62 1,25 16,0 41, ,83 5,50 32,0 60, ,92 1, ,83 5,60 33,4 62, ,21 1, ,83 5, ,51 1, ,83 5, ,17 1, ,83 5,90 33,4 62, ,28 1, ,83 6,00 35,0 64, ,05 1,60 16,0 41, ,83 6, ,45 1,70 17,5 43, ,83 6, ,73 1, ,92 6, ,94 1,90 17,5 43, ,41 6,40 35,0 64, ,41 2,00 19,0 44, ,41 6,50 36,5 67, ,12 2, ,41 6,60 36, ,68 2, ,41 6,70 38,0 67, ,93 2, ,41 6,80 68, ,83 2,40 19,0 44, ,41 6, ,02 2,50 21,0 46, ,54 7, ,21 2,60 20, ,54 7, ,98 2,70 20,5 46, ,54 7, ,28 2,80 22,0 48, ,59 7,30 38,0 68, ,28 2, ,59 7,40 39,5 70, ,28 3, ,59 7, ,38 3, ,59 7,60 39,5 70, ,38 3,20 22,0 48, ,59 7,70 41,5 71, ,38 3,30 24,0 49, ,84 7, ,38 3, ,03 7, ,38 3,50 24,0 49, ,33 8,00 41,5 71, ,62 43

46 Hi-Tuff Drill - 5xD D Example Ordering Code -Select series number then add tool number. (example = 8,5mm Hi Tuff Drill) L1 L2 Drill Dimensions 205 Drill Dimensions 205 Ø D L² L¹ Tool No Price Ø D L² L¹ Tool No Price 8,10 43,0 75, ,60 10,90 52,5 87, ,27 8, ,26 11,00 52,5 87, ,57 8, ,66 11,10 52,5 87, ,06 8, ,37 11,20 54,0 92, ,27 8, ,11 11, ,40 8, ,20 11, ,12 8, ,59 11, ,06 8,80 43,0 75, ,73 11, ,86 8,90 44,5 78, ,54 11, ,83 9, ,61 11, ,83 9, ,65 11,90 54,0 92, ,81 9,20 44,5 78, ,31 12,00 55,5 94, ,73 9,30 46,0 79, ,25 12,50 57,0 95, ,69 9, ,02 13,00 60,5 98, ,49 9,50 46,0 79, ,61 13,50 63,5 102, ,27 9,60 47,5 83, ,93 14,00 63,5 102, ,57 9, ,32 14,50 66,5 105, ,79 9, ,72 15,00 66,5 105, ,09 9,90 47,5 83, ,83 15,50 70,0 108, ,03 10,00 49,0 84, ,24 16,00 70,0 108, ,29 10, ,62 16,50 73,0 114, ,59 10, ,94 17,00 73,0 117, ,30 10, ,80 17,50 76,0 121, ,68 10,40 49,0 84, ,82 18,00 76,0 121, ,37 10,50 51,0 86, ,59 18,50 79,5 127, ,02 10, ,71 19,00 79,5 127, ,67 10, ,91 20,00 82,5 133, ,51 10,80 51,0 86, ,10 P59 44

47 Micro Drill Uncoated Example Ordering Code - Select series number then add tool number. (Example = 1,0mm Uncoated Micro Drill) D L 1 L 2 P57 Drill Dimensions 300 Drill Dimensions 300 Ø D L¹ L 2 Tool No Price Ø D L¹ L 2 Tool No Price 0,50 38,0 9, ,97 1,85 38,0 16, ,28 0, ,45 1, ,50 0,60 9, ,88 1, ,50 0,65 12, ,21 2, ,04 0, ,97 2, ,04 0, ,45 2, ,48 0, ,45 2, ,48 0,85 12, ,65 2, ,92 0,90 16, ,97 2, ,61 0, ,65 2, ,02 1, ,34 2, ,78 1, ,34 2, ,98 1, ,90 2, ,65 1, ,90 2, ,30 1, ,46 2, ,41 1, ,02 2, ,92 1, ,02 2, ,92 1, ,61 2, ,25 1, ,61 2, ,41 1, ,18 2, ,40 1, ,18 2, ,97 1, ,18 2, ,19 1, ,50 2, ,67 1, ,50 3, ,55 1, ,50 3, ,88 1, ,28 3, ,81 1,80 38,0 16, ,28 3,15 38,0 16, ,19 Non-Stocked Standard - Delivery 3-5 Days 45

48 Jobbers Drill - 5xD 21 Metric/ 118 DIN D Example Ordering Code - Select series number then add tool number. (example = 4,0mm Jobber Drill) L1 L2 Drill Dimensions 224 Drill Dimensions 224 Ø D L² L¹ Tool No Price Ø D L² L¹ Tool No Price 0,30 3,0 26, ,02 3,60 39,0 70, ,77 0,35 4, ,94 3,70 39,0 70, ,47 0,40 5, ,94 3,80 43,0 75, ,04 0,45 5, ,85 3, ,97 0,50 6, ,75 4, ,26 0,55 7, ,69 4, ,57 0,60 7, ,69 4,20 43,0 75, ,20 0,65 8,0 26, ,59 4,30 47,0 80, ,28 0,70 9,0 28, ,59 4, ,59 0,75 9,0 28, ,59 4, ,51 0,80 10,0 30, ,69 4, ,66 0,85 10,0 30, ,85 4,70 47,0 80, ,07 0,90 11,0 32, ,94 4,80 52,0 86, ,07 0,95 11,0 32, ,02 4, ,15 1,00 12,0 34, ,82 5, ,51 1,05 12,0 34, ,02 5, ,85 1,10 14,0 36, ,45 5, ,48 1,15 14,0 36, ,62 5,30 52,0 86, ,63 1,20 16,0 38, ,62 5,40 57,0 93, ,11 1, ,62 5, ,33 1,30 16,0 38, ,72 5, ,56 1,35 18,0 40, ,72 5, ,71 1, ,72 5, ,04 1, ,72 5, ,29 1,50 18,0 40, ,34 6,00 57,0 93, ,50 1,60 20,0 43, ,81 6,10 63,0 101, ,06 1,70 20,0 43, ,91 6, ,39 1,80 22,0 46, ,58 6, ,73 1,90 22,0 46, ,76 6, ,63 2,00 24,0 49, ,57 6, ,00 2,10 24,0 49, ,46 6, ,29 2,20 27,0 53, ,18 6,70 63,0 101, ,59 2,30 27,0 53, ,66 6,80 69,0 109, ,76 2,40 30,0 57, ,04 6, ,29 2, ,09 7, ,25 2,60 30,0 57, ,45 7, ,23 2,70 33,0 61, ,67 7, ,48 2, ,05 7, ,17 2, ,44 7, ,54 3,00 33,0 61, ,66 7,50 69,0 109, ,76 3,10 36,0 65, ,23 7,60 75,0 117, ,47 3, ,05 7, ,74 3,30 36,0 65, ,78 7, ,09 3,40 39,0 70, ,92 7, ,72 3,50 39,0 70, ,05 8,00 75,0 117, ,34 P59 46

49 Jobbers Drill - 5xD 21 Metric/ 118 DIN D Example Ordering Code - Select series number then add tool number. (example = 9,0mm Jobber Drill) L1 L2 P59 Drill Dimensions 224 Drill Dimensions 224 Ø D L² L¹ Tool No Price Ø D L² L¹ Tool No Price 8,10 75,0 117, ,55 10,90 94,0 142, ,49 8, ,63 11, ,82 8, ,26 11, ,04 8, ,79 11, ,61 8,50 75,0 117, ,23 11, ,93 8,60 81,0 125, ,15 11, ,49 8, ,71 11, ,16 8, ,26 11, ,05 8,90 81,0 125, ,09 11, ,37 9,00 81,0 125, ,13 11,80 94,0 142, ,71 9, ,54 11,90 101,0 151, ,81 9, ,40 12, ,83 9, ,47 12, ,14 9, ,74 13,00 101,0 151, ,49 9,50 81,0 125, ,21 13,50 108,0 160, ,58 9,60 87,0 133, ,32 14,00 108,0 160, ,67 9, ,02 14,50 114,0 169, ,77 9, ,65 15,00 114,0 169, ,43 9, ,13 15,50 120,0 178, ,34 10, ,68 16,00 120,0 178, ,99 10, ,11 16,50 125,0 184, ,64 10,20 133, ,57 17,00 125,0 184, ,10 10,30 133, ,52 17,50 130,0 191, ,51 10, ,05 18,00 130,0 191, ,50 10, ,37 18,50 135,0 198, ,49 10,60 87,0 133, ,59 19,00 135,0 198, ,48 10,70 94,0 142, ,59 20,00 140,0 205, ,02 10,80 94,0 142, ,16 47

50 Centre Drill 333A 402 Example Ordering Code - Select series number then add tool number. (example = 4,0mm Centre Drill) D1 D2 L1 Drill Dimensions 402 Ø D¹ Ø D² (h9) L¹ Tool No Price 0,50 3,15 31,5* ,72 0,80 3,15 31,5* ,72 1,00 3,15 31, ,56 1,25 3,15 31, ,84 1,60 4,0 35, ,19 2,00 5,0 40, ,53 2,50 6,3 45, ,39 3,15 8,0 50, ,37 4,00 10,0 56, ,05 5,00 12,5 63, ,29 * Overall Length (L¹) Not To DIN Specification P60 90 NC Spot Drill D Example Ordering Code - Select series number then add tool number. (Example = 6,0mm 90 Spotting Drill) L1 L2 Drill Dimensions 404 Ø D Ø D² L¹ Tool No Price 5,00 26,0 51, ,68 6,00 26,0 51, ,15 8,00 26,0 64, ,13 10,00 30,0 70, ,42 12,00 40,0 76, ,09 P60 48

51 NC Spot Drill D Example Ordering Code - Select series number then add tool number. (example = 6,0mm 120 Spotting Drill) L1 L2 Drill Dimensions 403 P60 Ø D Ø D² L¹ Tool No Price 5,00 26,0 51, ,68 6,00 26,0 51, ,15 8,00 26,0 64, ,13 10,00 30,0 70, ,42 12,00 40,0 76, ,09 49

52 Technical Data Micro-Tuff Drill 305M 305AM Recommended Cutting Data Recommended Speeds By Material Group Vc (m/min) Material Groups Material Type 305M Uncoated 305AM Altima Micro Coated Low Carbon Steels P Alloy Steel ( 35 Rc) Alloy Steel (36-45 Rc) Free Machining Stainless Steels M Austenitic Ferritic/Martensitic PH Stainless Cast Irons K Grey Cast Iron Ductile Cast Iron Titanium Alloys (Ti6AL4v) Special Alloys S High Temp Alloys (Inconel, Nimonic, Hastelloy) Hardened Steels H Rc Steel Aluminium Alloys (< 10% Si) Non-Ferrous N Plastics RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Recommended Feedrates By Material Group Drill Diameter (mm) Material Groups Material Type 0,5 1,0 1,5 2,0 3,0 Feed (mm/rev) Steels P Low Carbon Alloy Steel ( 35 Rc) Alloy Steel (36-45 Rc) Free Machining 0,01 0,02 0,04 0,06 0,075 Stainless Steels M Austenitic 0,01 0,02 0,04 0,06 0,075 Ferritic/Martensitic PH Stainless 0,005 0,01 0,02 0,03 0,035 Recommended Pecking Depths By Drill Diameter* (Ø D¹) Cast Irons K Grey Cast Iron Ductile Cast Iron 0,01 0,02 0,04 0,06 0,075 Diameter Ø D¹ Pecking Depth 0,50 0,5 x Ø D¹ Special Alloys S Titanium Alloys (Ti6AL4v) 0,01 0,02 0,04 0,06 0,075 High Temp Alloys (Inconel, Nimonic, Hastelloy) 0,005 0,01 0,02 0,025 0,035 Hardened Steels H Rc Steel 0,005 0,01 0,02 0,025 0,035 1,00 1 x Ø D¹ 1,50 1,5 x Ø D¹ 2,00 2 x Ø D¹ 3,00 3 x Ø D¹ Non-Ferrous N Aluminium Alloys (< 10% Si) Plastics 0,015 0,025 0,05 0,075 0,10 * Pecking depths can vary by material type Feedrate Formula For Metric - Feed = RPM x mm/rev 50

53 Technical Data XD Spot Drill 200S Spot Drill Recommended Cutting Data Drill Diameter (mm) Materials Vc (m/min) Feed (mm/rev) Low Carbon Steel <0,3%C 100 0,076 0,1 0,13 0,16 0,16 Medium Carbon Steel 80 0,076 0,1 0,13 0,16 0,16 Alloy Steel 35hrc 70 0,076 0,1 0,13 0,16 0,16 Alloy Steel 36-45hrc 45 0,076 0,1 0,13 0,16 0,16 Alloy Steel 45-50hrc 40 0,076 0,1 0,13 0,16 0,16 Grey Cast Iron 110 0,076 0,1 0,13 0,16 0,16 Ductile Cast Iron 80 0,076 0,1 0,13 0,16 0,16 Austenitic Stainless 45 0,076 0,1 0,13 0,16 0,16 Ph Stainless 30 0,076 0,1 0,13 0,16 0,16 High Temp Alloys 20 0,076 0,1 0,13 0,16 0,16 Titanium Alloys 55 0,076 0,1 0,13 0,16 0,16 RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Feedrate Formula For Metric - Feed = RPM x mm/rev

54 Technical Data XD High Performance Recommended Speed - XD/MD Materials 2XDSSM 3 X D SOLID 2XDSRM 5 X D SOLID 2XDCSM 3 X D COOLANT Vc (m/min) 2XDCRM 5 X D COOLANT 2XDCLM 7 X D COOLANT An M.A.FORD Advanced Product Group 2MDCLM 10 X D COOLANT Low Carbon Steel <0,3%C Medium Carbon Steel Alloy Steel 35hrc Alloy Steel 36-45hrc Alloy Steel 45-50hrc Grey Cast Iron Ductile Cast Iron Austenitic Stainless Ph Stainless High Temp Alloys Titanium Alloys RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ XD Drill - Recommended Feed 0,5-6mm diameter Materials Feed (mm/rev) 0,5 1, Low Carbon Steel <0,3%C 0,025-0,05 0,05-0,075 0,075-0,12 0,1-0,15 0,12-0,18 0,14-0,2 Medium Carbon Steel 0,025-0,05 0,05-0,075 0,075-0,12 0,1-0,15 0,12-0,18 0,14-0,2 Alloy Steel 35hrc 0,025-0,05 0,05-0,075 0,075-0,12 0,1-0,15 0,12-0,18 0,14-0,2 Alloy Steel 36-45hrc 0,01-0,025 0,025-0,04 0,05-0,11 0,08-0,13 0,12-0,18 0,14-0,2 Alloy Steel 45-50hrc 0,01-0,02 0,02-0,03 0,035-0,075 0,06-0,1 0,08-0,12 0,09-0,15 Grey Cast Iron 0,025-0,05 0,05-0,075 0,075-0,12 0,1-0,15 0,12-0,18 0,14-0,2 Ductile Cast Iron 0,025-0,05 0,05-0,075 0,075-0,12 0,1-0,15 0,12-0,18 0,14-0,2 Austenitic Stainless 0,025-0,05 0,05-0,075 0,075-0,12 0,1-0,15 0,12-0,18 0,14-0,2 Ph Stainless 0,01-0,03 0,025-0,05 0,05-0,085 0,06-0,09 0,07-0,11 0,08-0,12 High Temp Alloys 0,01-0,03 0,025-0,05 0,035-0,085 0,04-0,09 0,05-0,10 0,06-0,11 Titanium Alloys 0,01-0,03 0,025-0,05 0,075-0,12 0,1-0,15 0,12-0,18 0,14-0,2 Feedrate Formula For Metric - Feed = RPM x mm/rev 52

55 Technical Data XD High Performance 2MDCL Micro Coolant - Recommended Feed Materials Feed (mm/rev) Diameter 2 2,5 2,9 An M.A.FORD Advanced Product Group Low Carbon Steel <0,3%C 0,046 0,051 0,056 Medium Carbon Steel 0,046 0,051 0,056 Alloy Steel 35hrc 0,046 0,051 0,056 Alloy Steel 36-45hrc 0,046 0,046 0,051 Alloy Steel 45-50hrc 0,025 0,033 0,046 Grey Cast Iron 0,046 0,051 0,056 Ductile Cast Iron 0,046 0,051 0,056 Austenitic Stainless 0,033 0,038 0,043 Ph Stainless 0,025 0,027 0,038 High Temp Alloys 0,025 0,027 0,036 Titanium Alloys 0,025 0,027 0,036 Feedrate Formula For Metric - Feed = RPM x mm/rev XD Drill - Recommended Feed 8-20mm Diameter Materials Feed (mm/rev) Low Carbon Steel <0,3%C 0,16-0,24 0,18-0,27 0,2-0,3 0,22-0,35 0,25-0,36 0,28-0,38 0,3-0,4 Medium Carbon Steel 0,16-0,24 0,18-0,27 0,2-0,3 0,22-0,35 0,25-0,36 0,28-0,38 0,3-0,4 Alloy Steel 35hrc 0,16-0,24 0,18-0,27 0,2-0,3 0,22-0,35 0,25-0,36 0,28-0,38 0,3-0,4 Alloy Steel 36-45hrc 0,16-0,24 0,18-0,27 0,2-0,3 0,22-0,35 0,25-0,36 0,28-0,38 0,3-0,4 Alloy Steel 45-50hrc 0,12-0,2 0,13-0,23 0,13-0,23 0,15-0,26 0,16-0,26 0,18-0,28 0,2-0,3 Grey Cast Iron 0,16-0,24 0,18-0,27 0,2-0,3 0,22-0,35 0,25-0,36 0,28-0,38 0,3-0,4 Ductile Cast Iron 0,16-0,24 0,18-0,27 0,2-0,3 0,22-0,35 0,25-0,36 0,28-0,38 0,3-0,4 Austenitic Stainless 0,16-0,24 0,18-0,27 0,2-0,3 0,22-0,35 0,25-0,36 0,28-0,38 0,3-0,4 Ph Stainless 0,1-0,15 0,13-0,23 0,18-0,25 0,2-0,27 0,22-0,3 0,25-0,33 0,28-0,35 High Temp Alloys 0,08-0,13 0,1-0,15 0,12-0,17 0,14-0,19 0,16-0,21 0,18-0,25 0,23-0,28 Titanium Alloys 0,16-0,24 0,18-0,27 0,2-0,3 0,22-0,35 0,25-0,36 0,28-0,38 0,3-0,4 Feedrate Formula For Metric - Feed = RPM x mm/rev 53

56 Technical Data Performance Drill HPDSR - HPDCR Recommended Cutting Data Recommended Speeds By Material Group Vc (m/min) HPDSR HPDCR Material Groups Material Type 5 X D Solid 5 X D Through Coolant Low Carbon Steels P Alloy Steel ( 35 Rc) Alloy Steel (36-45 Rc) Mould/Tool Steel Stainless Steels Cast Irons M K Austenitic Martensitic Grey Cast Iron Ductile Cast Iron RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Recommended Feedrates By Material Group Material Groups Material Type Low Carbon Drill Diameter (mm) 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 Feed (mm/rev) Steels P Alloy Steel ( 35 Rc) Alloy Steel (36-45 Rc) 0,145 0,181 0,181 0,226 0,285 0,362 0,362 0,453 Mould/Tool Steel 0,084 0,102 0,102 0,130 0,167 0,210 0,210 0,260 Stainless Steels M Austenitic Martensitic 0,070 0,090 0,090 0,110 0,140 0,180 0,180 0,225 Grey Cast Iron Cast Irons K Ductile Cast Iron Feedrate Formula For Metric - Feed = RPM x mm/rev 0,155 0,193 0,217 0,305 0,305 0,386 0,435 0,532 54

57 Technical Data 2XDCEM An M.A.FORD Advanced Product Group Process For Successful Deep Hole Drilling: 1. Start by producing a 1,5 x diameter to 3 x diameter pilot hole using a coolant or non-coolant pilot drill. Typically this tool will have a point angle the same as or greater than the deep hole drill. Run this drill at 100% of the final drill speed and 1/2 the normal IPM. 2. Retract and tool change to the final deep hole (2XDCE M.A.Ford ) drill. Drill should not make contact here Drill should make contact here 3. Rapid to clearance plane and enter the pilot hole at 25% (don t exceed 400 to 500 RPM) of the final speed and mm/min. This will help with true position by eliminating drill whip. Once into the hole, turn on the coolant and advance to the material start. At this point, you can add a dwell to clear any chips that have been left from the previous drill and let the spindle get to full speed. Increase the speed and feed to final drilling parameters. 4. Drill one shot to the final hole depth or through. 5. Should you experience any squeaking you may need to retract the drill and increase your feed. Chip packing is occurring and will need to be addressed. 6. Once through the material, it may be necessary to reduce the RPM to eliminate breakage of the drill due to drill whip. Then retract to the clearance plane. Machine Requirements High Pressure Pump System (70 Bar) Machine runout of 0,008mm Max. Due to the conditions of equipment, tool holders, and conditions beyond M.A.Ford s control, your results may vary. Should your application require more in depth discussion or a special tool, please contact M.A. Ford s Application Engineering Department at +44(0) Safety Note Always wear the appropriate personal protective equipment such as safety glasses and protective clothing when using solid carbide or HSS cutting tools. Machines should be fully guarded. Technical data provided should be considered advisory only as variations may be necessary depending on the particular application. 55

58 Technical Data XD High Performance xd 2XDCEM Recommended Cutting Data Workpiece Material Groups Vc (m/min) Tool Diameter (mm) Feed (mm/rev) An M.A.FORD Advanced Product Group Low Carbon Steel <0,3%C 105 0,05 0,075 0,088 0,106 0,127 0,193 0,215 0,238 0,254 Structural Steel 120 0,05 0,075 0,088 0,106 0,127 0,193 0,215 0,238 0,254 Medium Carbon Steel 80 0,05 0,075 0,088 0,106 0,127 0,193 0,215 0,238 0,254 Tool & Die Steel 80 0,05 0,075 0,088 0,106 0,127 0,193 0,215 0,238 0,254 Alloy Steel 80 0,05 0,075 0,088 0,106 0,127 0,193 0,215 0,238 0,254 Grey Cast Iron 120 0,06 0,078 0,1 0,12 0,14 0,2 0,215 0,24 0,254 Ductile Cast Iron 80 0,06 0,078 0,1 0,12 0,14 0,2 0,215 0,24 0,254 Austenitic Stainless 55 0,05 0,071 0,09 0,105 0,127 0,193 0,215 0,238 0,254 Ph Stainless 40 0,05 0,071 0,09 0,105 0,127 0,193 0,215 0,238 0,254 Martensitic Stainless 40 0,05 0,071 0,09 0,105 0,127 0,193 0,215 0,238 0,254 Ferritic Stainless 75 0,05 0,071 0,09 0,105 0,127 0,193 0,215 0,238 0,254 High Temp Alloys ,017 0,022 0,03 0,035 0,048 0,063 0,071 0,078 0,085 Titanium Alloys 45 0,03 0,04 0,05 0,06 0,071 0,12 0,127 0,14 0,152 Hardened Steel (35-45 Hrc) 35 0,012 0,015 0,02 0,022 0,027 0,048 0,053 0,06 0,066 Hardened Steel (46-55 Hrc) 25 0,012 0,015 0,02 0,022 0,027 0,048 0,053 0,06 0,066 Non Ferrous-Al<14%Si 150 0,083 0,11 0,14 0,17 0,195 0,28 0,314 0,35 0,378 Non Ferrous-Al>14%Si 105 0,083 0,11 0,14 0,17 0,195 0,28 0,314 0,35 0,378 Non Ferrous-Brass 120 0,053 0,071 0,088 0,106 0,127 0,279 0,314 0,35 0,378 Cu/Cu Alloys/Magnesium 90 0,053 0,071 0,088 0,106 0,127 0,279 0,314 0,35 0,378 RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Feedrate Formula For Metric - Feed = RPM x mm/rev X-AL High Performance 3 Flute - 4-5xD 229 Recommended Cutting Data Workpiece Material Groups Example Materials Vc (m/min) Tool Diameter (mm) 1, Feed (mm/rev) Titanium Alloys Ti6Al4V 30 0,013 0,05 0,11 0,15 0,2 0,25 Aluminium < 10% Si 6061/ ,08 0,20 0,31 0,45 0,61 0,76 Aluminium > 10% Si ,05 0,08 0,15 0,25 0,31 0,35 Brass/Copper ,05 0,08 0,15 0,25 0,31 0,35 Plastics ,05 0,08 0,15 0,25 0,31 0,35 RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Feedrate Formula For Metric - Feed = RPM x mm/rev 56

59 Technical Data Micro Drill 300 Recommended Cutting Data Workpiece Material Groups Examples Vc (m/min) Steels P Low Carbon Steels 1018 Alloy Steels (up to 35 Rc) 4140 Tool Diameter(mm) 0,5 1,0 2,0 3,0 Feed (mm/rev) 55,0170,0250,0500, ,0250,0500,0760 Cast Irons K Gray Cast Iron A48 Class 20/G4000 Ductile Cast Iron A536/ Aluminum (<10% Si) 6061-T6/7075-T ,0250,0500, ,0250,0500, ,0250,0500,0760 Non-Ferrous N Aluminum (>10% Si) Copper/Brass ,0250,0500,0760 RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Feedrate Formula For Metric - Feed = RPM x mm/rev 302 Recommended Cutting Data Plastic ,0250,0500,0760 Workpiece Material Groups Examples Low Carbon Steels 1018 Vc (m/min) Tool Diameter(mm) <,76,77-,92,93-1,02 1,03-1,30 > 1,31 Feed (mm/rev) 90,005-,015 0,02 0,025 0,036 0,038 Steels P Alloy Steels (up to 35 Rc) ,005-,015 0,02 0,025 0,036 0,038 Alloy Steels (36-45 Rc) ,005-,015 0,02 0,025 0,036 0,038 Austenitic 304/316 60,005-,010 0,015 0,02 0,025 0,03 Stainless Steels Precipitation Hardened Stainless Steels M Free Machining 55,005-,010 0,015 0,02 0,025 0,03 Ferritic Martensitic 30,005-,015 0,02 0,025 0,036 0, PH 25,005-,015 0,02 0,025 0,036 0,038 Cast Irons K Gray Cast Iron A48 Class 20/G4000 Ductile Cast Iron A536/ ,005-,015 0,02 0,025 0,036 0, ,005-,015 0,02 0,025 0,036 0,038 Special Alloys Hardened Steels S H Titanium 6AL-4V High Temp Alloys Inconel/Hastelloy/ Waspelloy >45 Rc A2/ ,005-,010 0,015 0,02 0,025 0,03 15,005-,010 0,015 0,02 0,025 0,03 55,005-,015 0,02 0,025 0,036 0,038 Non-Ferrous N Aluminum (<10% Si) 140,005-,015 0,02 0,025 0,036 0,038 Aluminum (>10% Si) 100,005-,015 0,02 0,025 0,036 0,038 Plastics 170,005-,015 0,02 0,025 0,036 0,038 Composites/Fiber Reinforced Materials/ Circuit Boards RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ 200,013-,038 0,051 0,076 0,102 0,127 Feedrate Formula For Metric - Feed = RPM x mm/rev 57

60 Technical Data Hi-Roc Drill - 3xD 200 Metric Recommended Cutting Data Workpiece Material Groups Examples Vc (m/min) Tool Diameter (mm) 1,0 1,5 3,0 6,0 10,0 12,0 16,0 20,0 Feed (mm/rev) Low Carbon Steels ,0060,0130,0510,1020,1270,1520,1750,2030 Steels P Alloy Steels (up to 35 Rc) 4140 Alloy Steels (36-45 Rc) ,0060,0130,0510,1020,1270,1520,1750, ,0060,0127,0500,0760,1010,1520,2030,2250 Austenitic M 304/316 40,0060,0127,0500,0760,1010,1520,2030,2250 Precipitation Hardened Stainless Steels M 17-4 PH 20,0060,0127,0500,0760,1010,1520,2030,2250 Titanium 6AL-4V 25,0060,0127,0500,0760,1010,1520,2030,2250 Special Alloys S High Temp Alloys Inconel/Hastelloy/ Waspelloy 25,0060,0127,0500,0760,1010,1520,2030,2250 Hardened Steels H >45 Rc A2/ ,0130,0250,0250,0250,0500,0500,0500,0760 Non-Ferrous N Plastic 90,0060,0127,0500,0760,1010,1520,2030,2250 Kevlar/Graphite 115,0060,0127,0500,0760,1010,1520,2030,2250 Glass/Ceramic 25,0130,0250,0250,0250,0500,0500,0500,0760 RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Feedrate Formula For Metric - Feed = RPM x mm/rev 58

61 Technical Data Metric Workpiece Material Groups Examples Vc (m/min) Low Carbon Steels Steels P Alloy Steels (up to 35 Rc) Alloy Steels (36-45 Rc) Austenitic M 304/ Precipitation Hardened Stainless Steels Cast Irons M 17-4 PH K Gray Cast Iron A48 Class 20/G4000 Ductile Cast Iron A536/ Special Alloys S Titanium 6AL-4V High Temp Alloys Inconel/Hastelloy/ Waspelloy Hardened Steels Non-Ferrous H N >45 Rc A2/ Plastic Kevlar/Graphite RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Workpiece Material Groups Examples Low Carbon Steels 1018 Tool Diameter (mm) 1,0 1,5 3,0 6,0 10,0 12,0 16,0 20,0 26,0 Feed (mm/rev),0250,0500,0760,1520,2030,2540,2750,3050,3560 Steels P Alloy Steels (up to 35 Rc) 4140 Alloy Steels (36-45 Rc) 4140,0250,0500,0760,1520,2030,2540,2750,3050,3560,0250,0500,0760,1520,2030,2540,2750,3050,3560 Austenitic Precipitation Hardened Stainless Steels M 304/316,0250,0500,0760,1520,2030,2540,2750,3050, PH,0060,0127,0500,0760,1010,1520,2030,2250,2540 Cast Irons K Gray Cast Iron A48 Class 20/G4000 Ductile Cast Iron A536/ ,0250,0500,0760,1520,2030,2540,2750,3050,3560,0250,0500,0760,1520,2030,2540,2750,3050,3560 Special Alloys S Titanium 6AL-4V High Temp Alloys Inconel/Hastelloy/ Waspelloy,0060,0127,0500,0760,1010,1520,2030,2250,2540,0060,0127,0500,0760,1010,1520,2030,2250,2540 Hardened Steels H >45 Rc A2/52100,0060,0127,0500,0760,1010,1520,2030,2250,2540 Non-Ferrous N Plastic,0060,0127,0500,0760,1010,1520,2030,2250,2540 Kevlar/Graphite,0060,0127,0500,0760,1010,1520,2030,2250,2540 Feedrate Formula For Metric - Feed = RPM x mm/rev 59

62 Technical Data Metric Workpiece Material Groups Examples Vc (m/min) Tool Diameter (mm) 1,0 1,5 3,0 6,0 10,0 12,0 Feed (mm/rev) Low Carbon Steels ,0125,0250,0380,0760,1020,1270 Steels P Alloy Steels (up to 35 Rc) ,0125,0250,0380,0760,1020,1270 Alloy Steels (36-45 Rc) ,0125,0250,0380,0760,1020, /316 40,0125,0250,0380,0760,1020,1270 Stainless Steels M 17-4 PH 20,0125,0250,0380,0760,1020,1270 Cast Irons K Gray Cast Iron A48 Class 20/G4000 Ductile Cast Iron A536/ ,0125,0250,0380,0760,1020, ,0125,0250,0380,0760,1020,1270 Titanium 6AL-4V 25,0125,0250,0380,0760,1020,1270 Special Alloys S High Temp Alloys Inconel/Hastelloy/Waspelloy 10,0125,0250,0380,0760,1020,1270 Hardened Steels H >45 Rc A2/52100 RPM Formula For Metric Only - RPM = (Vc x 318,0) Drill Ø D¹ Feedrate Formula For Metric - Feed = RPM x mm/rev 15,0125,0250,0380,0760,1020,

63 Carbide In applications demanding high-precision hole tolerances, tighter diameter control and higher quality bore finishes, our TrueSize reamers provide a highly cost-effective solution. Our solid carbide reamers are manufactured to DIN1420 H7 standards and are available in a wide range of sizes to meet the machining needs of virtually any materials, including cast iron, aluminium, stainless steel, exotic alloys, plastics and other non-ferrous materials. TrueSize Solid Carbide Recommended Stock Allowance TrueSize Straight Flute Carbide 272 Page Technical Information 72 The extensive TrueSize range of metric sizes covers diameters from 0,33mm up to 16,00mm and we currently stock more than 800 different sizes, which are available for immediate despatch to meet deadlines. 45 Tool Material RHC Right Hand Cutting Lead Chamfer P01 Technical Information 1420 H7 DIN Specs Steel Cast Iron Workpiece Material Group Hardened Steels (35-65Rc) Stainless Steels Special Alloys Non-Ferrous 61

64 Solid Carbide Recommended Stock Allowance For Truesize Solid Carbide Metric Reamer Diameter (mm) Workpiece Material Group Material Type 0,35 1,00 2,00 3,00 4,00 5,00 6,00 8,00 10,00 12,00 16,00 Drill Diameter (mm) 0,30 0,90 1,80 2,70 3,70 4,70 5,70 7,60 9,60 11,60 15,50 Stock Allowance (mm) Low Carbon 0,03 0,09 0,17 0,24 0,26 0,27 0,28 0,31 0,33 0,35 0,41 P Medium Carbon 0,03 0,08 0,15 0,21 0,23 0,24 0,25 0,28 0,31 0,32 0,38 Tool Steel 0,03 0,08 0,15 0,21 0,23 0,24 0,25 0,28 0,31 0,32 0,38 M Stainless 0,03 0,08 0,15 0,21 0,23 0,24 0,25 0,28 0,31 0,32 0,38 S High Temp Alloys 0,03 0,07 0,14 0,20 0,21 0,22 0,23 0,24 0,26 0,29 0,33 Titanium Alloys 0,03 0,09 0,17 0,24 0,26 0,27 0,28 0,31 0,33 0,35 0,41 K Grey Cast Iron 0,03 0,09 0,17 0,24 0,26 0,27 0,28 0,31 0,33 0,35 0,41 Ductile Cast Iron 0,03 0,09 0,17 0,24 0,26 0,27 0,28 0,31 0,33 0,35 0,41 H Hardened Steel 0,02 0,06 0,12 0,17 0,19 0,19 0,20 0,23 0,26 0,27 0,33 Aluminium Alloys 0,04 0,09 0,19 0,27 0,29 0,29 0,30 0,32 0,34 0,37 0,41 N Copper & Hard Bronze 0,04 0,09 0,19 0,27 0,29 0,29 0,30 0,33 0,36 0,38 0,43 Brass & Soft Bronze 0,04 0,09 0,19 0,27 0,29 0,29 0,30 0,32 0,34 0,37 0,41 Dowel Pin Chart - Metric Dowels Dowel Pin Strong Press Fit Reamer Required Tight Press Fit Reamer Required Loose Press Fit Reamer Required Tight Slip Fit Reamer Required Loose Slip Fit Reamer Required Size (mm) Reamer Ø Reamer Ø Reamer Ø Reamer Ø Reamer Ø 2,0 1, , , , , ,0 2, , , , , ,0 3, , , , , ,0 4, , , , , ,0 5, , , , , ,0 7, , , , , ,0 9, , , , , ,0 11, , , , , Truesize Reamer Tolerance - DIN 1420 H7 Dowels are to nominal size +0,0025 / -0,0025mm ISO 9001:2008 Certified 62

65 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) ,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price P72 0,330 0,33 5,0 38, ,20 0,343 0,34 5,0 38, ,20 0,351 0,35 5,0 38, ,20 0,356 0,36 5,0 38, ,20 0,368 0,37 5,0 38, ,20 0,381 0,38 5,0 38, ,20 0,394 0,39 5,0 38, ,20 0,400 0,40 5,0 38, ,20 0,406 0,41 5,0 38, ,20 0,419 0,42 5,0 38, ,20 0,432 0,43 5,0 38, ,20 0,445 0,45 5,0 38, ,20 0,450 0,45 5,0 38, ,20 0,457 0,46 5,0 38, ,20 0,470 0,47 5,0 38, ,20 0,483 0,48 5,0 38, ,20 0,495 0,49 5,0 38, ,20 0,500 0,50 5,0 38, ,20 0,508 0,51 5,0 38, ,20 0,521 0,52 6,5 38, ,20 0,533 0,53 6,5 38, ,20 0,546 0,55 6,5 38, ,20 0,551 0,55 6,5 38, ,20 0,559 0,56 6,5 38, ,20 0,572 0,57 6,5 38, ,20 0,584 0,58 6,5 38, ,20 0,597 0,59 6,5 38, ,20 0,600 0,60 6,5 38, ,20 0,610 0,61 6,5 38, ,20 0,622 0,62 6,5 38, ,20 0,635 0,64 6,5 38, ,20 0,648 0,65 6,5 38, ,20 0,650 0,65 6,5 38, ,20 0,660 0,66 6,5 38, ,20 0,673 0,67 6,5 38, ,20 0,686 0,69 6,5 38, ,20 0,700 0,70 6,5 38, ,20 0,711 0,71 6,5 38, ,20 0,724 0,72 6,5 38, ,20 0,737 0,73 6,5 38, ,20 0,742 0,74 6,5 38, ,20 0,750 0,75 6,5 38, ,20 0,762 0,76 6,5 38, ,20 0,775 0,78 6,5 38, ,20 0,787 0,79 6,5 38, ,20 0,792 0,79 6,5 38, ,20 0,800 0,80 6,5 38, ,20 0,813 0,81 6,5 38, ,20 0,826 0,83 6,5 38, ,20 0,838 0,84 6,5 38, ,20 0,850 0,85 6,5 38, ,20 0,864 0,86 6,5 38, ,20 0,876 0,88 6,5 38, ,20 0,889 0,89 6,5 38, ,20 0,900 0,90 6,5 38, ,20 0,914 0,91 6,5 38, ,20 0,927 0,93 6,5 38, ,20 0,940 0,94 6,5 38, ,20 0,950 0,95 6,5 38, ,20 0,965 0,97 6,5 38, ,20 0,978 0,98 6,5 38, ,20 0,991 0,99 6,5 38, ,20 1,000 1,00 6,5 38, ,20 1,016 1,02 6,5 38, ,20 1,029 1,03 9,5 38, ,20 1,041 1,04 9,5 38, ,20 1,049 1,05 9,5 38, ,20 1,054 1,06 9,5 38, ,20 1,067 1,07 9,5 38, ,20 1,080 1,08 9,5 38, ,20 1,092 1,09 9,5 38, ,20 1,100 1,10 9,5 38, ,20 1,105 1,09 9,5 38, ,20 1,118 1,09 9,5 38, ,20 1,130 1,09 9,5 38, ,20 1,143 1,09 9,5 38, ,20 1,148 1,09 9,5 38, ,20 1,156 1,09 9,5 38, ,20 1,168 1,09 9,5 38, ,20 1,181 1,09 9,5 38, ,20 1,189 1,09 9,5 38, ,20 1,194 1,09 9,5 38, ,20 1,200 1,09 9,5 38, ,20 1,207 1,09 9,5 38, ,20 1,219 1,09 9,5 38, ,20 1,232 1,09 9,5 38, ,20 1,245 1,09 9,5 38, ,20 1,250 1,09 9,5 38, ,20 1,257 1,09 9,5 38, ,20 1,270 1,09 9,5 38, ,20 1,283 1,09 9,5 38, ,20 1,295 1,09 9,5 38, ,20 1,298 1,09 9,5 38, ,20 1,308 1,09 9,5 38, ,20 63

66 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) 3,00 + 0,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price 1,321 1,17 9,5 38, ,20 1,334 1,17 9,5 38, ,20 1,346 1,17 9,5 38, ,20 1,349 1,17 9,5 38, ,20 1,359 1,17 9,5 38, ,20 1,372 1,17 9,5 38, ,20 1,384 1,17 9,5 38, ,20 1,397 1,17 9,5 38, ,20 1,400 1,17 9,5 38, ,20 1,410 1,17 9,5 38, ,20 1,422 1,17 9,5 38, ,20 1,435 1,17 9,5 38, ,20 1,448 1,17 9,5 38, ,20 1,450 1,17 9,5 38, ,20 1,461 1,17 9,5 38, ,20 1,473 1,17 9,5 38, ,20 1,486 1,17 9,5 38, ,20 1,500 1,17 9,5 38, ,20 1,511 1,47 9,5 38, ,20 1,524 1,47 9,5 38, ,20 1,537 1,47 9,5 38, ,20 1,550 1,47 9,5 38, ,20 1,562 1,47 9,5 38, ,20 1,575 1,47 9,5 38, ,20 1,588 1,47 9,5 38, ,20 1,600 1,47 9,5 38, ,20 1,613 1,47 9,5 38, ,20 1,626 1,47 9,5 38, ,20 1,638 1,47 9,5 38, ,20 1,650 1,47 9,5 38, ,20 1,664 1,47 9,5 38, ,20 1,676 1,47 9,5 38, ,20 1,689 1,65 12,5 44, ,20 1,700 1,65 12,5 44, ,20 1,715 1,65 12,5 44, ,20 1,727 1,65 12,5 44, ,20 1,740 1,65 12,5 44, ,20 1,750 1,65 12,5 44, ,20 1,753 1,65 12,5 44, ,20 1,765 1,65 12,5 44, ,20 1,778 1,65 12,5 44, ,20 1,791 1,65 12,5 44, ,20 1,798 1,65 12,5 44, ,20 1,803 1,65 12,5 44, ,20 1,816 1,65 12,5 44, ,20 1,829 1,65 12,5 44, ,20 1,842 1,65 12,5 44, ,20 1,850 1,65 12,5 44, ,20 1,854 1,65 12,5 44, ,20 1,867 1,65 12,5 44, ,20 1,880 1,65 12,5 44, ,20 1,892 1,85 12,5 44, ,20 1,900 1,85 12,5 44, ,20 1,905 1,85 12,5 44, ,20 1,918 1,85 12,5 44, ,20 1,930 1,85 12,5 44, ,20 1,943 1,85 12,5 44, ,20 1,948 1,85 12,5 44, ,20 1,956 1,85 12,5 44, ,20 1,969 1,85 12,5 44, ,20 1,981 1,85 12,5 44, ,20 1,984 1,85 12,5 44, ,20 1,994 1,85 12,5 44, ,20 2,000 1,85 12,5 44, ,20 2,007 1,85 12,5 44, ,20 2,019 1,85 12,5 44, ,20 2,032 1,85 12,5 44, ,20 2,045 1,85 12,5 44, ,20 2,050 1,85 12,5 44, ,20 2,057 1,85 12,5 44, ,20 2,070 2,03 12,5 51, ,20 2,083 2,03 12,5 51, ,20 2,096 2,03 12,5 51, ,20 2,101 2,03 12,5 51, ,20 2,108 2,03 12,5 51, ,20 2,121 2,03 12,5 51, ,20 2,134 2,03 12,5 51, ,20 2,146 2,03 12,5 51, ,20 2,149 2,03 12,5 51, ,20 2,159 2,03 12,5 51, ,20 2,172 2,03 12,5 51, ,20 2,184 2,03 12,5 51, ,20 2,197 2,03 12,5 51, ,20 2,200 2,03 12,5 51, ,20 2,210 2,03 12,5 51, ,20 2,223 2,03 12,5 51, ,20 2,235 2,03 12,5 51, ,20 2,248 2,03 12,5 51, ,20 2,250 2,03 12,5 51, ,20 2,261 2,03 12,5 51, ,20 2,273 2,24 12,5 51, ,20 2,286 2,24 12,5 51, ,20 2,300 2,24 12,5 51, ,20 2,311 2,24 12,5 51, ,20 P72 64

67 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) ,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price P72 2,324 2,24 12,5 51, ,20 2,337 2,24 12,5 51, ,20 2,350 2,24 12,5 51, ,20 2,362 2,24 12,5 51, ,20 2,375 2,24 12,5 51, ,20 2,380 2,24 12,5 51, ,20 2,388 2,24 12,5 51, ,20 2,400 2,24 12,5 51, ,20 2,413 2,24 12,5 51, ,20 2,426 2,24 12,5 51, ,20 2,438 2,24 12,5 51, ,20 2,451 2,24 12,5 51, ,20 2,464 2,24 12,5 51, ,20 2,477 2,44 16,0 57, ,20 2,489 2,44 16,0 57, ,20 2,500 2,44 16,0 57, ,20 2,515 2,44 16,0 57, ,20 2,527 2,44 16,0 57, ,20 2,540 2,44 16,0 57, ,20 2,550 2,44 16,0 57, ,20 2,565 2,44 16,0 57, ,20 2,578 2,44 16,0 57, ,20 2,591 2,44 16,0 57, ,20 2,601 2,44 16,0 57, ,20 2,616 2,44 16,0 57, ,20 2,629 2,44 16,0 57, ,20 2,642 2,44 16,0 57, ,20 2,649 2,44 16,0 57, ,20 2,667 2,44 16,0 57, ,20 2,680 2,64 16,0 57, ,20 2,692 2,64 16,0 57, ,20 2,700 2,64 16,0 57, ,20 2,705 2,64 16,0 57, ,20 2,718 2,64 16,0 57, ,20 2,731 2,64 16,0 57, ,20 2,743 2,64 16,0 57, ,20 2,751 2,64 16,0 57, ,20 2,756 2,64 16,0 57, ,20 2,769 2,64 16,0 57, ,20 2,779 2,64 16,0 57, ,20 2,781 2,64 16,0 57, ,20 2,794 2,64 16,0 57, ,20 2,800 2,64 16,0 57, ,20 2,807 2,64 16,0 57, ,20 2,819 2,64 16,0 57, ,20 2,832 2,64 16,0 57, ,20 2,845 2,64 16,0 57, ,20 2,850 2,64 16,0 57, ,20 2,858 2,64 16,0 57, ,20 2,870 2,64 16,0 57, ,20 2,883 2,84 16,0 57, ,20 2,896 2,84 16,0 57, ,20 2,900 2,84 16,0 57, ,20 2,908 2,84 16,0 57, ,20 2,921 2,84 16,0 57, ,20 2,934 2,84 16,0 57, ,20 2,946 2,84 16,0 57, ,20 2,949 2,84 16,0 57, ,20 2,959 2,84 16,0 57, ,20 2,972 2,84 16,0 57, ,20 2,985 2,84 16,0 57, ,20 3,000 2,84 16,0 57, ,20 3,010 2,84 16,0 57, ,20 3,023 2,84 16,0 57, ,20 3,035 2,84 16,0 57, ,20 3,048 2,84 16,0 57, ,20 3,051 2,84 16,0 57, ,20 3,061 2,84 16,0 57, ,20 3,073 2,84 16,0 57, ,20 3,086 3,05 16,0 57, ,20 3,099 3,05 16,0 57, ,20 3,112 3,05 16,0 57, ,20 3,124 3,05 16,0 57, ,20 3,137 3,05 16,0 57, ,20 3,150 3,05 16,0 57, ,20 3,162 3,05 16,0 57, ,20 3,170 3,05 16,0 57, ,20 3,175 3,05 16,0 57, ,20 3,188 3,05 16,0 57, ,20 3,200 3,05 16,0 57, ,20 3,213 3,05 16,0 57, ,20 3,226 3,05 16,0 57, ,20 3,239 3,05 16,0 57, ,20 3,251 3,05 16,0 57, ,20 3,264 3,23 19,0 63, ,20 3,277 3,23 19,0 63, ,20 3,289 3,23 19,0 63, ,20 3,300 3,23 19,0 63, ,20 3,315 3,23 19,0 63, ,20 3,327 3,23 19,0 63, ,20 3,340 3,23 19,0 63, ,20 3,350 3,23 19,0 63, ,20 3,366 3,23 19,0 63, ,20 3,378 3,23 19,0 63, ,20 65

68 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) ,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price 3,391 3,23 19,0 63, ,20 3,401 3,23 19,0 63, ,20 3,416 3,23 19,0 63, ,20 3,429 3,23 19,0 63, ,20 3,442 3,23 19,0 63, ,20 3,449 3,23 19,0 63, ,20 3,454 3,23 19,0 63, ,20 3,467 3,43 19,0 63, ,20 3,480 3,43 19,0 63, ,20 3,493 3,43 19,0 63, ,20 3,500 3,43 19,0 63, ,20 3,505 3,43 19,0 63, ,20 3,518 3,43 19,0 63, ,20 3,531 3,43 19,0 63, ,20 3,543 3,43 19,0 63, ,20 3,551 3,43 19,0 63, ,20 3,556 3,43 19,0 63, ,98 3,571 3,43 19,0 63, ,98 3,581 3,43 19,0 63, ,98 3,594 3,43 19,0 63, ,98 3,599 3,43 19,0 63, ,98 3,607 3,43 19,0 63, ,98 3,620 3,43 19,0 63, ,98 3,632 3,43 19,0 63, ,98 3,645 3,43 19,0 63, ,98 3,650 3,43 19,0 63, ,98 3,658 3,43 19,0 63, ,98 3,670 3,63 19,0 63, ,98 3,683 3,63 19,0 63, ,98 3,696 3,63 19,0 63, ,98 3,701 3,63 19,0 63, ,98 3,708 3,63 19,0 63, ,98 3,721 3,63 19,0 63, ,98 3,734 3,63 19,0 63, ,98 3,747 3,63 19,0 63, ,98 3,750 3,63 19,0 63, ,98 3,759 3,63 19,0 63, ,98 3,772 3,63 19,0 63, ,98 3,785 3,63 19,0 63, ,98 3,800 3,63 19,0 63, ,98 3,810 3,63 19,0 63, ,98 3,823 3,63 19,0 63, ,98 3,835 3,63 19,0 63, ,98 3,851 3,63 19,0 63, ,98 3,861 3,63 19,0 63, ,98 3,874 3,84 19,0 63, ,98 3,886 3,84 19,0 63, ,98 3,900 3,84 19,0 63, ,20 3,912 3,84 19,0 63, ,20 3,924 3,84 19,0 63, ,20 3,937 3,84 19,0 63, ,20 3,950 3,84 19,0 63, ,20 3,962 3,84 19,0 63, ,20 3,967 3,84 19,0 63, ,20 3,975 3,84 19,0 63, ,20 3,988 3,84 19,0 63, ,20 4,000 3,84 19,0 63, ,20 4,013 3,84 19,0 63, ,20 4,026 3,84 19,0 63, ,20 4,039 3,84 19,0 63, ,20 4,049 4,01 22,0 70, ,20 4,064 4,01 22,0 70, ,20 4,077 4,01 22,0 70, ,20 4,089 4,01 22,0 70, ,98 4,100 4,01 22,0 70, ,98 4,115 4,01 22,0 70, ,98 4,128 4,01 22,0 70, ,98 4,140 4,01 22,0 70, ,98 4,150 4,01 22,0 70, ,98 4,166 4,01 22,0 70, ,98 4,178 4,01 22,0 70, ,98 4,191 4,01 22,0 70, ,98 4,201 4,01 22,0 70, ,98 4,216 4,01 22,0 70, ,98 4,229 4,01 22,0 70, ,98 4,242 4,01 22,0 70, ,98 4,249 4,22 22,0 70, ,98 4,267 4,22 22,0 70, ,98 4,280 4,22 22,0 70, ,98 4,293 4,22 22,0 70, ,98 4,300 4,22 22,0 70, ,98 4,305 4,22 22,0 70, ,98 4,318 4,22 22,0 70, ,98 4,331 4,22 22,0 70, ,98 4,343 4,22 22,0 70, ,98 4,351 4,22 22,0 70, ,98 4,356 4,22 22,0 70, ,98 4,366 4,22 22,0 70, ,98 4,369 4,22 22,0 70, ,98 4,382 4,22 22,0 70, ,98 4,394 4,22 22,0 70, ,98 4,399 4,22 22,0 70, ,98 4,407 4,22 22,0 70, ,98 4,420 4,22 22,0 70, ,98 P72 66

69 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) ,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price P72 4,432 4,22 22,0 70, ,83 4,445 4,22 22,0 70, ,83 4,450 4,42 22,0 70, ,83 4,458 4,42 22,0 70, ,83 4,470 4,42 22,0 70, ,83 4,483 4,42 22,0 70, ,83 4,496 4,42 22,0 70, ,83 4,501 4,42 22,0 70, ,83 4,509 4,42 22,0 70, ,83 4,521 4,42 22,0 70, ,83 4,534 4,42 22,0 70, ,83 4,547 4,42 22,0 70, ,83 4,549 4,42 22,0 70, ,83 4,559 4,42 22,0 70, ,60 4,572 4,42 22,0 70, ,60 4,585 4,42 22,0 70, ,60 4,597 4,42 22,0 70, ,60 4,600 4,42 22,0 70, ,60 4,610 4,42 22,0 70, ,60 4,623 4,42 22,0 70, ,60 4,636 4,42 22,0 70, ,60 4,648 4,42 22,0 70, ,60 4,651 4,62 22,0 70, ,60 4,661 4,62 22,0 70, ,60 4,674 4,62 22,0 70, ,60 4,686 4,62 22,0 70, ,60 4,700 4,62 22,0 70, ,60 4,712 4,62 22,0 70, ,60 4,724 4,62 22,0 70, ,60 4,737 4,62 22,0 70, ,60 4,750 4,62 22,0 70, ,60 4,760 4,62 22,0 70, ,60 4,775 4,62 22,0 70, ,60 4,788 4,62 22,0 70, ,60 4,798 4,62 22,0 70, ,60 4,800 4,62 22,0 70, ,60 4,813 4,62 22,0 70, ,60 4,826 4,62 22,0 70, ,60 4,839 4,62 22,0 70, ,60 4,849 4,62 22,0 70, ,60 4,864 4,83 25,0 76, ,60 4,877 4,83 25,0 76, ,60 4,890 4,83 25,0 76, ,60 4,900 4,83 25,0 76, ,60 4,915 4,83 25,0 76, ,60 4,928 4,83 25,0 76, ,60 4,940 4,83 25,0 76, ,60 4,950 4,83 25,0 76, ,83 4,966 4,83 25,0 76, ,83 4,978 4,83 25,0 76, ,83 4,991 4,83 25,0 76, ,83 5,001 4,83 25,0 76, ,83 5,017 4,83 25,0 76, ,83 5,029 4,83 25,0 76, ,83 5,042 4,83 25,0 76, ,83 5,050 4,83 25,0 76, ,83 5,067 5,03 25,0 76, ,83 5,080 5,03 25,0 76, ,83 5,093 5,03 25,0 76, ,83 5,100 5,03 25,0 76, ,83 5,105 5,03 25,0 76, ,60 5,118 5,03 25,0 76, ,60 5,131 5,03 25,0 76, ,60 5,144 5,03 25,0 76, ,60 5,151 5,03 25,0 76, ,60 5,159 5,03 25,0 76, ,60 5,169 5,03 25,0 76, ,60 5,182 5,03 25,0 76, ,60 5,194 5,03 25,0 76, ,60 5,199 5,03 25,0 76, ,60 5,207 5,03 25,0 76, ,60 5,220 5,03 25,0 76, ,60 5,232 5,03 25,0 76, ,60 5,245 5,21 25,0 76, ,60 5,250 5,21 25,0 76, ,60 5,258 5,21 25,0 76, ,60 5,271 5,21 25,0 76, ,60 5,283 5,21 25,0 76, ,60 5,296 5,21 25,0 76, ,60 5,301 5,21 25,0 76, ,60 5,309 5,21 25,0 76, ,60 5,321 5,21 25,0 76, ,60 5,334 5,21 25,0 76, ,60 5,347 5,21 25,0 76, ,60 5,349 5,21 25,0 76, ,60 5,359 5,21 25,0 76, ,60 5,372 5,21 25,0 76, ,60 5,385 5,21 25,0 76, ,60 5,398 5,21 25,0 76, ,60 5,400 5,21 25,0 76, ,60 5,410 5,21 25,0 76, ,60 5,423 5,21 25,0 76, ,60 5,436 5,21 25,0 76, ,60 5,448 5,21 25,0 76, ,60 67

70 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) ,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price 5,451 5,41 25,0 76, ,30 5,461 5,41 25,0 76, ,30 5,474 5,41 25,0 76, ,30 5,486 5,41 25,0 76, ,30 5,500 5,41 25,0 76, ,30 5,512 5,41 25,0 76, ,30 5,525 5,41 25,0 76, ,30 5,537 5,41 25,0 76, ,30 5,550 5,41 25,0 76, ,30 5,563 5,41 25,0 76, ,30 5,575 5,41 25,0 76, ,30 5,588 5,41 25,0 76, ,30 5,601 5,41 25,0 76, ,30 5,613 5,41 25,0 76, ,30 5,626 5,41 25,0 76, ,30 5,639 5,41 25,0 76, ,30 5,649 5,61 25,0 76, ,30 5,652 5,61 25,0 76, ,30 5,664 5,61 25,0 76, ,30 5,677 5,61 25,0 76, ,30 5,690 5,61 25,0 76, ,30 5,700 5,61 25,0 76, ,30 5,715 5,61 25,0 76, ,30 5,728 5,61 25,0 76, ,30 5,740 5,61 25,0 76, ,30 5,751 5,61 25,0 76, ,30 5,766 5,61 25,0 76, ,30 5,779 5,61 25,0 76, ,30 5,791 5,61 25,0 76, ,30 5,799 5,61 25,0 76, ,30 5,804 5,61 25,0 76, ,30 5,817 5,61 25,0 76, ,30 5,829 5,61 25,0 76, ,30 5,842 5,61 25,0 76, ,30 5,850 5,82 25,0 76, ,30 5,855 5,82 25,0 76, ,30 5,867 5,82 25,0 76, ,30 5,880 5,82 25,0 76, ,30 5,893 5,82 25,0 76, ,30 5,900 5,82 25,0 76, ,30 5,906 5,82 25,0 76, ,30 5,918 5,82 25,0 76, ,30 5,931 5,82 25,0 76, ,30 5,944 5,82 25,0 76, ,30 5,951 5,82 25,0 76, ,30 5,956 5,82 25,0 76, ,30 5,969 5,82 25,0 76, ,30 5,982 5,82 25,0 76, ,30 5,994 5,82 25,0 76, ,30 5,999 5,82 25,0 76, ,30 6,007 5,82 25,0 76, ,30 6,020 5,82 25,0 76, ,30 6,033 5,99 25,0 76, ,30 6,045 5,99 25,0 76, ,30 6,050 5,99 25,0 76, ,30 6,058 5,99 25,0 76, ,30 6,071 5,99 25,0 76, ,30 6,083 5,99 25,0 76, ,30 6,096 5,99 25,0 76, ,30 6,101 5,99 25,0 76, ,30 6,109 5,99 25,0 76, ,30 6,121 5,99 25,0 76, ,30 6,134 5,99 25,0 76, ,30 6,149 5,99 25,0 76, ,30 6,160 5,99 25,0 76, ,30 6,172 5,99 25,0 76, ,30 6,185 5,99 25,0 76, ,30 6,200 5,99 25,0 76, ,30 6,210 5,99 25,0 76, ,30 6,223 5,99 25,0 76, ,30 6,236 6,20 25,0 76, ,30 6,251 6,20 25,0 76, ,30 6,261 6,20 25,0 76, ,30 6,274 6,20 25,0 76, ,30 6,287 6,20 25,0 76, ,30 6,300 6,20 25,0 76, ,30 6,312 6,20 25,0 76, ,30 6,325 6,20 25,0 76, ,30 6,337 6,20 25,0 76, ,30 6,345 6,20 25,0 76, ,30 6,350 6,20 25,0 76, ,30 6,363 6,20 25,0 76, ,30 6,375 6,20 25,0 76, ,30 6,388 6,20 25,0 76, ,30 6,398 6,20 25,0 76, ,30 6,401 6,20 25,0 76, ,30 6,414 6,20 25,0 76, ,30 6,426 6,20 25,0 76, ,30 6,449 6,40 28,0 83, ,30 6,477 6,40 28,0 83, ,30 6,500 6,40 28,0 83, ,30 6,528 6,40 28,0 83, ,30 6,553 6,40 28,0 83, ,30 6,579 6,40 28,0 83, ,30 P72 68

71 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) ,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price P72 6,604 6,40 28,0 83, ,00 6,629 6,40 28,0 83, ,00 6,655 6,40 28,0 83, ,00 6,680 6,40 28,0 83, ,00 6,706 6,40 28,0 83, ,00 6,731 6,40 28,0 83, ,00 6,746 6,40 28,0 83, ,00 6,756 6,40 28,0 83, ,00 6,782 6,40 28,0 83, ,00 6,807 6,40 28,0 83, ,00 6,833 6,40 28,0 83, ,00 6,858 6,40 28,0 83, ,00 6,883 6,40 28,0 83, ,00 6,909 6,86 28,0 83, ,00 6,934 6,86 28,0 83, ,00 6,960 6,86 28,0 83, ,00 6,985 6,86 28,0 83, ,00 7,000 6,86 28,0 83, ,00 7,010 6,86 28,0 83, ,00 7,036 6,86 28,0 83, ,00 7,061 6,86 28,0 83, ,00 7,087 6,86 28,0 83, ,00 7,112 6,86 28,0 83, ,00 7,137 6,86 28,0 83, ,00 7,142 6,86 28,0 83, ,33 7,163 6,86 28,0 83, ,33 7,188 6,86 28,0 83, ,33 7,214 6,86 28,0 83, ,33 7,239 6,86 28,0 83, ,33 7,264 6,86 28,0 83, ,33 7,290 7,24 28,0 83, ,33 7,315 7,24 28,0 83, ,33 7,341 7,24 28,0 83, ,33 7,366 7,24 28,0 83, ,33 7,391 7,24 28,0 83, ,33 7,417 7,24 28,0 83, ,33 7,442 7,24 28,0 83, ,33 7,468 7,24 28,0 83, ,33 7,493 7,24 28,0 83, ,33 7,501 7,24 28,0 83, ,33 7,518 7,24 28,0 83, ,33 7,539 7,24 28,0 83, ,33 7,544 7,24 28,0 83, ,33 7,569 7,24 28,0 83, ,33 7,595 7,24 28,0 83, ,33 7,620 7,24 28,0 83, ,33 7,645 7,24 28,0 83, ,33 7,671 7,24 28,0 83, ,00 7,696 7,65 28,0 83, ,00 7,722 7,65 28,0 83, ,00 7,747 7,65 28,0 83, ,00 7,772 7,65 28,0 83, ,00 7,798 7,65 28,0 83, ,00 7,823 7,65 28,0 83, ,00 7,849 7,65 28,0 83, ,00 7,874 7,65 28,0 83, ,00 7,887 7,65 28,0 83, ,00 7,899 7,65 28,0 83, ,00 7,912 7,65 28,0 83, ,00 7,925 7,65 28,0 83, ,00 7,932 7,65 28,0 83, ,00 7,938 7,65 28,0 83, ,00 7,950 7,65 28,0 83, ,00 7,963 7,65 28,0 83, ,00 7,976 7,65 28,0 83, ,00 8,000 7,65 28,0 83, ,00 8,026 7,65 28,0 83, ,00 8,052 7,65 28,0 83, ,00 8,077 7,65 28,0 83, ,00 8,103 8,05 32,0 89, ,00 8,128 8,05 32,0 89, ,33 8,153 8,05 32,0 89, ,33 8,179 8,05 32,0 89, ,33 8,204 8,05 32,0 89, ,33 8,230 8,05 32,0 89, ,33 8,255 8,05 32,0 89, ,33 8,280 8,05 32,0 89, ,33 8,306 8,05 32,0 89, ,33 8,331 8,05 32,0 89, ,33 8,357 8,05 32,0 89, ,33 8,382 8,05 32,0 89, ,33 8,407 8,05 32,0 89, ,33 8,433 8,05 32,0 89, ,33 8,458 8,05 32,0 89, ,33 8,484 8,43 32,0 89, ,33 8,499 8,43 32,0 89, ,33 8,509 8,43 32,0 89, ,33 8,534 8,43 32,0 89, ,33 8,560 8,43 32,0 89, ,33 8,585 8,43 32,0 89, ,33 8,611 8,43 32,0 89, ,33 8,636 8,43 32,0 89, ,33 8,661 8,43 32,0 89, ,33 8,687 8,43 32,0 89, ,33 69

72 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) ,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price 8,712 8,43 32,0 89, ,95 8,730 8,43 32,0 89, ,95 8,738 8,43 32,0 89, ,95 8,763 8,43 32,0 89, ,95 8,788 8,43 32,0 89, ,95 8,814 8,43 32,0 89, ,95 8,839 8,43 32,0 89, ,95 8,865 8,43 32,0 89, ,95 8,890 8,84 32,0 89, ,95 8,915 8,84 32,0 89, ,95 8,941 8,84 32,0 89, ,95 8,966 8,84 32,0 89, ,95 8,992 8,84 32,0 89, ,95 8,999 8,84 32,0 89, ,95 9,017 8,84 32,0 89, ,95 9,042 8,84 32,0 89, ,95 9,068 8,84 32,0 89, ,95 9,093 8,84 32,0 89, ,95 9,119 8,84 32,0 89, ,50 9,129 8,84 32,0 89, ,50 9,144 8,84 32,0 89, ,50 9,169 8,84 32,0 89, ,50 9,195 8,84 32,0 89, ,50 9,220 8,84 32,0 89, ,50 9,246 8,84 32,0 89, ,50 9,271 9,22 32,0 89, ,50 9,296 9,22 32,0 89, ,50 9,322 9,22 32,0 89, ,50 9,347 9,22 32,0 89, ,50 9,373 9,22 32,0 89, ,50 9,398 9,22 32,0 89, ,50 9,423 9,22 32,0 89, ,50 9,449 9,22 32,0 89, ,50 9,474 9,22 32,0 89, ,50 9,500 9,22 32,0 89, ,50 9,512 9,22 32,0 89, ,50 9,520 9,22 32,0 89, ,50 9,525 9,22 32,0 89, ,50 9,550 9,22 32,0 89, ,50 9,576 9,22 32,0 89, ,50 9,601 9,22 32,0 89, ,50 9,627 9,22 32,0 89, ,50 9,652 9,22 32,0 89, ,50 9,677 9,22 32,0 89, ,50 9,703 9,22 32,0 89, ,50 9,728 9,22 32,0 89, ,50 9,754 9,22 32,0 89, ,50 9,779 9,22 32,0 89, ,95 9,804 9,22 32,0 89, ,95 9,830 9,65 32,0 89, ,95 9,855 9,65 32,0 89, ,95 9,881 9,65 32,0 89, ,95 9,906 9,65 32,0 89, ,95 9,921 9,65 32,0 89, ,95 9,931 9,65 32,0 89, ,95 9,957 9,65 32,0 89, ,95 9,982 9,65 32,0 89, ,95 10,000 9,65 32,0 89, ,95 10,008 9,65 32,0 89, ,95 10,033 9,65 32,0 89, ,95 10,058 9,65 32,0 89, ,95 10,084 9,65 32,0 89, ,95 10,109 9,65 32,0 89, ,95 10,135 9,65 32,0 89, ,95 10,160 9,65 32,0 89, ,95 10,185 9,65 32,0 89, ,50 10,211 9,65 32,0 89, ,50 10,236 9,65 32,0 89, ,50 10,262 9,65 32,0 89, ,50 10,287 9,65 32,0 89, ,50 10,312 9,65 32,0 89, ,50 10,317 9,65 32,0 89, ,50 10,338 9,65 32,0 89, ,50 10,363 9,65 32,0 89, ,50 10,389 9,65 32,0 89, ,50 10,414 9,65 32,0 89, ,50 10,439 9,65 32,0 89, ,50 10,465 9,65 32,0 89, ,50 10,490 9,65 32,0 89, ,50 10,500 9,65 32,0 89, ,50 10,516 9,65 32,0 89, ,50 10,541 9,65 32,0 89, ,50 10,566 10,41 35,0 95, ,50 10,592 10,41 35,0 95, ,50 10,617 10,41 35,0 95, ,50 10,643 10,41 35,0 95, ,50 10,668 10,41 35,0 95, ,50 10,693 10,41 35,0 95, ,50 10,719 10,41 35,0 95, ,50 10,744 10,41 35,0 95, ,50 10,770 10,41 35,0 95, ,50 10,795 10,41 35,0 95, ,50 10,820 10,41 35,0 95, ,50 10,846 10,41 35,0 95, ,50 P72 70

73 45 Straight Flute Carbide 1420 H7 RHC DIN 1420 H7 D¹ (mm) Tolerance (mm) ,004 / + 0,008 3,00-6,00 + 0,005 / + 0,010 6,00-10,00 + 0,006 / + 0,012 10,00-16,00 + 0,008 / + 0, D2 D1 L2 L1 Ø D¹ Ø D² L 2 L 1 Z Price Ø D¹ Ø D² L 2 L 1 Z Price P72 10,871 10,41 35,0 95, ,05 10,897 10,41 35,0 95, ,05 10,922 10,41 35,0 95, ,05 10,947 10,41 35,0 95, ,05 10,973 10,41 35,0 95, ,05 11,000 10,41 35,0 95, ,05 11,024 10,41 35,0 95, ,05 11,049 10,41 35,0 95, ,05 11,074 10,41 35,0 95, ,05 11,100 10,41 35,0 95, ,05 11,110 10,41 35,0 95, ,83 11,125 10,41 35,0 95, ,83 11,138 10,41 35,0 95, ,83 11,151 10,41 35,0 95, ,83 11,176 10,41 35,0 95, ,83 11,201 10,41 35,0 95, ,83 11,227 10,41 35,0 95, ,83 11,252 10,41 35,0 95, ,83 11,278 10,41 35,0 95, ,83 11,303 10,41 35,0 95, ,83 11,328 11,18 35,0 95, ,83 11,354 11,18 35,0 95, ,83 11,379 11,18 35,0 95, ,83 11,405 11,18 35,0 95, ,83 11,430 11,18 35,0 95, ,83 11,455 11,18 35,0 95, ,83 11,481 11,18 35,0 95, ,83 11,499 11,18 35,0 95, ,83 11,509 11,18 35,0 95, ,83 11,532 11,18 35,0 95, ,83 11,557 11,18 35,0 95, ,83 11,582 11,18 35,0 95, ,83 11,608 11,18 35,0 95, ,83 11,633 11,18 35,0 95, ,83 11,659 11,18 35,0 95, ,83 11,684 11,18 35,0 95, ,83 11,709 11,18 35,0 95, ,83 11,735 11,18 35,0 95, ,83 11,760 11,18 35,0 95, ,83 11,786 11,18 35,0 95, ,83 11,811 11,18 35,0 95, ,83 11,836 11,18 35,0 95, ,83 11,862 11,18 35,0 95, ,83 11,887 11,18 35,0 95, ,83 11,908 11,18 35,0 95, ,83 11,913 11,18 35,0 95, ,83 11,938 11,18 35,0 95, ,83 11,963 11,18 35,0 95, ,05 11,989 11,18 35,0 95, ,05 11,999 11,18 35,0 95, ,05 12,014 11,18 35,0 95, ,05 12,040 11,18 35,0 95, ,05 12,065 11,18 35,0 95, ,05 12,090 11,94 38,0 102, ,05 12,116 11,94 38,0 102, ,05 12,141 11,94 38,0 102, ,05 12,167 11,94 38,0 102, ,05 12,192 11,94 38,0 102, ,83 12,217 11,94 38,0 102, ,83 12,243 11,94 38,0 102, ,83 12,268 11,94 38,0 102, ,83 12,294 11,94 38,0 102, ,83 12,304 11,94 38,0 102, ,83 12,319 11,94 38,0 102, ,83 12,344 11,94 38,0 102, ,83 12,370 11,94 38,0 102, ,83 12,395 11,94 38,0 102, ,83 12,421 11,94 38,0 102, ,83 12,446 11,94 38,0 102, ,83 12,471 11,94 38,0 102, ,83 12,497 11,94 38,0 102, ,83 12,522 11,94 38,0 102, ,83 12,548 11,94 38,0 102, ,83 12,573 11,94 38,0 102, ,83 12,598 11,94 38,0 102, ,83 12,624 11,94 38,0 102, ,83 12,649 11,94 38,0 102, ,83 12,675 11,94 38,0 102, ,83 12,687 11,94 38,0 102, ,83 12,697 11,94 38,0 102, ,83 12,700 11,94 38,0 102, ,83 12,725 11,94 38,0 102, ,83 13,000 12,83 38,0 102, ,83 13,096 12,83 38,0 102, ,83 13,492 12,83 38,0 102, ,83 13,891 13,59 38,0 102, ,83 14,000 13,59 38,0 102, ,83 14,288 13,59 38,0 102, ,83 14,684 14,35 44,0 102, ,83 14,999 14,35 44,0 102, ,83 15,083 14,35 44,0 102, ,83 15,479 15,11 44,0 102, ,83 15,875 15,11 44,0 102, ,83 15,999 15,11 44,0 102, ,83 71

74 Solid Carbide Workpiece Material Group Material Type Vc (m/min) Feed Type (Refer To Chart) Low Carbon M - H Medium Carbon M Steels P Alloy Steels L Mould/Tool Steel L Free Machining M Austenitic M Stainless Steels M Ferritic M Martensitic M PH Stainless L - M High Temp Alloys (Ni) L Special Alloys S High Temp Alloys (Co) L Titanium Alloys L - M Grey Cast Iron L - M Cast Irons K Ductile Cast Iron M Malleable Iron M 25 HRc M - H HRc M Hardened Steels H HRc L HRc L 52 HRc 5-10 L Aluminium Alloys M - H Non Ferrous N Copper & Hard Bronze L Brass & Soft Bronze M RPM = Vc (m/min) x 318,0 Reamer Ø Recommended Feedrate Data Nominal Reamer Diameter Ø D¹ Feed (mm/rev) L M H 0,3mm - 1,6mm 0,01-0,03 0,02-0,05 0,03-0,08 1,6mm - 3,0mm 0,03-0,05 0,05-0,10 0,08-0,15 3,0mm - 6,0mm 0,05-0,10 0,10-0,15 0,15-0,25 6,0mm - 12,0mm 0,10-0,15 0,15-0,25 0,25-0,35 12,0mm - 16,0mm 0,15-0,25 0,25-0,50 0,35-0,75 Feedrate Formula For Metric - Feed = RPM x mm/rev TrueSize Reamer Tolerances Diameter (mm) Tolerance (mm) D¹ 0,330-16,000 DIN 1420 H7 (See Below) D² 0,330-16, ,00 / - 0,03 L¹ 0,330-16,000 + /- 1,5 L² 0,330-16,000 + /- 1,5 72

75 Page M.A. Ford offers one of the most comprehensive ranges of solid carbide and HSS countersinks available to ensure that whatever your countersink application, we have the perfect solution. The original M.A. Ford single flute Uniflute countersink is unrivalled for economical, chatter free machining and is available in both carbide and HSS options with a choice of angles from 60 o to 120 o and diameters ranging from 3mm to 75mm. Uniflute Carbide Countersink Single Flute 60 Uncoated Uniflute HSS Countersink Single Flute 61 Steam Treated Uniflute HSS Countersink Single Flute 61B ALtima Blaze Coated Uniflute HSS Countersink Single Flute 61T TiN Coated Uniflute HSS Countersink Sets Single Flute 61 Steam Treated & 61T TiN Coated For higher feed rates, multiple flute tools are also available in our range. Multiple flute countersinks not only allow the use of increased feed rates but also reduces chip loads and removes vibration and chatter. Whichever you select for your specific needs, you ll find unparalleled quality in manufacturing and materials with HSS and carbide countersinks. Uniflute Resharpening Fixture 65 Vibration Free Carbide Countersink 6 Flute 78 Uncoated Vibration Free Carbide Countersink 6 Flute 79 Steam Treated Vibration Free HSS Countersink 6 Flute 79B ALtima Blaze Coated & 79T TiN Coated Vibration Free HSS Countersink Set 6 Flute 79 Steam Treated & 79T TiN Coated 79 HSS Aircraft Countersink 3 Flute 92 Bright Finish 80 Tool Material Coatings Number of Flutes HSS Aircraft Countersink Set 3 Flute 92 Bright Finish Set HSS Countersink Single Flute 880, 882 & 883 Bright Finish Included Angle 4 DIN Specs Steel P01 Technical Information Cast Iron HSS Countersink Single Flute 880T, 882T & 883T TiN Coated HSS Countersink 3 Flute 890, 892 & 893 Uncoated Workpiece Material Group Hardened Steels (35-65Rc) Stainless Steels Special Alloys Non-Ferrous HSS Countersink 3 Flute 890T, 892T & 893T TiN Coated HSS Countersink Set 3 Flute 893 Uncoated & 893T TiN Coated Technical Information

76 Carbide Countersink - Single Flute 60 Z Uncoated D1 D2 L 1 D 3 Included Angle ± D¹ D² D³ (Max) L¹ Price Price Price Price 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 3/8" 9,5mm 1/2" 12,7mm 3/4" 19,0mm 1" 25,4mm 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 1/4" 6,4mm 1/4" 6,4mm 1/2" 12,7mm 1/2" 12,7mm 0,030" 0,8mm 0,045" 1,1mm 0,045" 1,1mm 0,06" 1,5mm 0,06" 1,5mm 0,120" 3,1mm 0,120 3,1mm 1-1/2" 38,1mm 1-1/2 38,1mm 2" 50,8mm 2" 50,8mm 2-3/8" 60,3mm 3" 76,2mm 3 76,2mm , , , , , , , , , , , , , , , , , , , , , , , , , , , ,05 P86 HSS Countersink - Single Flute HSS Z Steam Treated D1 D2 D 3 L 1 Included Angle ± D¹ D² D³ (Max) L¹ Price Price Price Price Price 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 3/8" 9,5mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 1" 25,4mm 1-1/4" 31,8mm 1-1/2" 38,1mm 2" 50,8mm 2-1/2" 63,5mm 3" 76,2mm 1/8 3,2mm 3/16 4,8mm 1/4 6,4mm 1/4 6,4mm 1/4 6,4mm 1/4 6,4mm 1/2" 12,7mm 1/2 12,7mm 1/2 12,7mm 3/4" 19,0mm 3/4 19,0mm 3/4 19,0mm 3/4 19,0mm 0,030" 0,8mm 0,045" 1,1mm 0,045 1,1mm 0,060" 1,5mm 0,060 1,5mm 0,060 1,5mm 0,120" 3,1mm 0,120 3,1mm 0,120 3,1mm 1/4 6,4mm 1/2" 12,7mm 3/4" 19,0mm 1" 25,4mm 1-1/2" 38,1mm 1-1/2 38,1mm 2" 50,8mm 2 50,8mm 2 50,8mm 2 57,2mm 2-3/4" 69,9mm 2-3/4 69,9mm 3" 76,2mm 3-1/2" 88,9mm 3-3/4" 95,3mm 5" 127,0mm 5-1/4" 133,4mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , P86 74

77 HSS Countersink - Single Flute HSS Z B ALtima Blaze Coated D1 D2 D 3 L 1 Included Angle ± D¹ D² D³ (Max) L¹ Price Price Price Price Price P86 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 3/8" 9,5mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 1" 25,4mm 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 1/4" 6,4mm 1/4" 6,4mm 1/4" 6,4mm 1/2" 12,7mm 1/2" 12,7mm 0,030" 0,8mm 0,045" 1,1mm 0,045" 1,1mm 0,060" 1,5mm 0,060" 1,5mm 0,060" 1,5mm 0,120" 3,1mm 0,120" 3,1mm 1-1/2" 38,1mm 1-1/2" 38,1mm 2" 50,8mm 2" 50,8mm 2" 50,8mm 2" 50,8mm 2-3/4" 69,9mm 2-3/4" 69,9mm 61B ,60 61B ,60 61B ,60 61B ,60 61B ,60 61B ,97 61B ,97 61B ,97 61B ,97 61B ,97 61B ,56 61B ,56 61B ,51 61B ,51 61B ,51 61B ,61 61B ,61 61B ,91 61B ,91 61B ,91 61B ,25 61B ,25 61B ,51 61B ,25 61B ,68 61B ,22 61B ,22 61B ,22 61B ,22 61B ,22 61B ,25 61B ,25 61B ,25 61B ,68 61B ,25 61B ,58 61B ,58 61B ,58 61B ,58 61B ,58 HSS Z HSS Countersink - Single Flute 61T TiN Coated D1 D2 D 3 P86 L 1 Included Angle ± D¹ D² D³ (Max) L¹ Price Price Price Price Price 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 3/8" 9,5mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 1" 25,4mm 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 1/4" 6,4mm 1/4" 6,4mm 1/4" 6,4mm 1/2" 12,7mm 1/2" 12,7mm 0,030" 0,8mm 0,045" 1,1mm 0,045" 1,1mm 0,060" 1,5mm 0,060" 1,5mm 0,060" 1,5mm 0,120" 3,1mm 0,120" 3,1mm 1-1/2" 38,1mm 1-1/2" 38,1mm 2" 50,8mm 2" 50,8mm 2" 50,8mm 2" 50,8mm 2-3/4" 69,9mm 2-3/4" 69,9mm 61T ,47 61T ,47 61T ,47 61T ,47 61T ,47 61T ,83 61T ,83 61T ,83 61T ,83 61T ,83 61T ,28 61T ,28 61T ,28 61T ,28 61T ,28 61T ,44 61T ,44 61T ,44 61T ,44 61T ,44 61T ,53 61T ,53 61T ,53 61T ,53 61T ,53 61T ,31 61T ,31 61T ,31 61T ,31 61T ,31 61T ,32 61T ,32 61T ,66 61T ,32 61T ,32 61T ,91 61T ,91 61T ,91 61T ,91 61T ,91 75

78 HSS Countersink Sets - Single Flute HSS Z Steam Treated 4pc Set - 61 Set Includes - 1/4 (6,4mm), 1/2 (12,7mm), 3/4 (19,0mm) & 1 (25,4mm) Set No, Angle Price 7pc Set - 61 Set Includes - 3/16 (4,8mm), 1/4 (6,4mm), 3/8 (9,5mm) 1/2 (12,7mm), 5/8 (15,9mm), 3/4 (19,0mm) & 1 (25,4mm) Set No. Angle Price , , , , , , , , , ,15 HSS Z T TiN Coated 4pc Set - 61T Set Includes - 1/4 (6,4mm), 1/2 (12,7mm) 3/4 (19,0mm), 1 (25,4mm) Set No, Angle Price 64T ,06 64T ,39 64T ,06 Resharpening Fixture The Unicam Resharpening Fixture is designed to resharpen Uniflute countersinks. The unique cam relief is quickly and easily reground on worn tools, greatly extending tool life. Can be used on a tool and cutter grinder, surface grinder or a pedestal grinder. Resharpens tools with 1/4, 1/2 or 3/4 shanks Packaged in plastic case. Includes detailed instructions on set-up and operation. Not recommended for 2-1/2 or 3 tools. 65 Resharpening Fixture Part No. Price ,79 76

79 Vibration Free Carbide Countersink - 6 Flute Z Uncoated D2 D1 D 3 L 1 Included Angle ± D¹ D² D³ (Max) L¹ Price Price Price Price Price P86 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 3/8" 9,5mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 1" 25,4mm 1-1/4" 31,8mm 1-1/2" 38,1mm 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 1/4" 6,4mm 3/8" 9,5mm 3/8" 9,5mm 1/2" 12,7mm 1/2" 12,7mm 1/2" 12,7mm 3/4" 19,0mm 0,030" 0,8mm 0,045" 1,1mm 0,060" 1,5mm 0,090" 2,3mm 0,150" 3,8mm 0,180" 4,6mm 0,210" 5,3mm 1/4" 6,4mm 0,370" 9,4mm 0,430" 10,9mm 1-1/2" 38,1mm 1-1/2" 38,1mm 2" 50,8mm 2" 50,8mm 2-1/8" 54,0mm 2-3/8" 60,3mm 2-3/4" 69,9mm 2-3/4" 69,9mm 3" 76,2mm 3-1/2" 88,9mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Vibration Free HSS Countersink - 6 Flute HSS Z Treated D2 D1 D 3 L 1 Included Angle ±0.5 P D¹ D² D³ (Max) L¹ Price Price Price Price Price 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 5/16" 7,9mm 3/8" 9,5mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 7/8" 22,2mm 1" 25,4mm 1-1/4" 31,8mm 1-1/2" 38,1mm 2" 50,8mm 2-1/2" 63,5mm 3" 76,2mm 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 1/4" 6,4mm 1/4" 6,4mm 3/8" 9,5mm 3/8" 9,5mm 1/2" 12,7mm 1/2" 12,7mm 1/2" 12,7mm 1/2" 12,7mm 3/4" 19,0mm 3/4" 19,0mm 3/4" 19,0mm 3/4" 19,0mm 0,030" 0,8mm 0,045" 1,1mm 0,060" 1,5mm 0,080" 2,0mm 0,090" 2,3mm 0,150" 3,8mm 0,180" 4,6mm 0,210" 5,3mm 0,230" 5,8mm 1/4" 6,4mm 0,370" 9,4mm 0,430" 10,9mm 0,620" 15,7mm 3/4" 19,0mm 1" 25,4mm 1-1/2" 38,1mm , , , , ,50 1-1/2" 38,1mm , , , , ,48 2" 50,8mm , , , , ,64 2" 50,8mm , , , , ,88 2" 50,8mm , , , , ,39 2" 50,8mm , , , , ,77 2-1/4" 57,1mm , , , , ,68 2-3/4" 69,9mm , , , , ,21 2-3/4" 69,9mm , , , , ,31 2-3/4" 69,9mm , , , , ,80 3" 76,2mm , , , , ,38 3-1/2" 88,9mm , , , , ,09 3-3/4" 95,2mm , , , , ,30 5" 127,0mm , , , /4" 133,4mm , , ,

80 Vibration Free HSS Countersink - 6 Flute HSS Z B ALtima Blaze Coated D2 D1 D 3 L 1 Included Angle ± D¹ D² D³ (Max) L¹ Price Price Price Price Price 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 3/8" 9,5mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 1" 25,4mm 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 1/4" 6,4mm 3/8" 9,5mm 3/8" 9,5mm 1/2" 12,7mm 1/2" 12,7mm 0,030" 0,8mm 0,045" 1,1mm 0,060" 1,5mm 0,090" 2,3mm 0,150" 3,8mm 0,180" 4,6mm 0,210" 5,3mm 1/4" 6,4mm 1-1/2" 38,1mm 1-1/2" 38,1mm 2" 50,8mm 2" 50,8mm 2" 50,8mm 2-1/4" 57,1mm 2-3/4" 69,9mm 2-3/4" 69,9mm 79B ,08 79B ,08 79B ,08 79B ,08 79B ,08 79B ,13 79B ,13 79B ,13 79B ,13 79B ,13 79B ,39 79B ,39 79B ,39 79B ,39 79B ,39 79B ,67 79B ,67 79B ,67 79B ,67 79B ,67 79B ,84 79B ,84 79B ,84 79B ,84 79B ,84 79B ,48 79B ,48 79B ,48 79B ,48 79B ,48 79B ,97 79B ,97 79B ,74 79B ,97 79B ,97 79B ,44 79B ,44 79B ,44 79B ,44 79B ,44 Vibration Free HSS Countersink - 6 Flute P86 HSS Z T TiN Coated D1 D 3 D2 L 1 Included Angle ± D¹ D² D³ (Max) L¹ Price Price Price Price Price 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 3/8" 9,5mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 1" 25,4mm 1/8" 3,2mm 3/16" 4,8mm 1/4" 6,4mm 1/4" 6,4mm 3/8" 9,5mm 3/8" 9,5mm 1/2" 12,7mm 1/2" 12,7mm 0,030" 0,8mm 0,045" 1,1mm 0,060" 1,5mm 0,090" 2,3mm 0,150" 3,8mm 0,180" 4,6mm 0,210" 5,3mm 1/4" 6,4mm 1-1/2" 38,1mm 1-1/2" 38,1mm 2" 50,8mm 2" 50,8mm 2" 50,8mm 2-1/4" 57,1mm 2-3/4" 69,9mm 2-3/4" 69,9mm 79T ,08 79T ,08 79T ,08 79T ,08 79T ,08 79T ,13 79T ,13 79T ,13 79T ,13 79T ,13 79T ,39 79T ,39 79T ,39 79T ,39 79T ,39 79T ,67 79T ,67 79T ,67 79T ,67 79T ,67 79T ,84 79T ,84 79T ,84 79T ,84 79T ,84 79T ,48 79T ,48 79T ,48 79T ,48 79T ,48 79T ,97 79T ,97 79T ,74 79T ,97 79T ,97 79T ,44 79T ,44 79T ,44 79T ,44 79T ,44 P86 78

81 Vibration Free HSS Countersink - 6 Flute Sets HSS Z Steam Treated 4pc Set - 79 Set Includes - 1/4 (6,4mm), 1/2 (12,7mm) 3/4 (19,0mm), 1 (25,4mm) 7pc Set - 79 Set Includes - 1/4 (6,4mm), 5/16 (7,9mm), 3/8 (9,5mm) 1/2 (12,7mm), 5/8 (15,9mm), 3/4 (19,0mm), 1 (25,4mm) Set No. Angle Price , , , ,00 Set No, Angle Price , , , ,05 Vibration Free HSS Countersink - 6 Flute Set HSS Z T TiN Coated 4pc Set - 79T Set Includes - 1/4 (6,4mm), 1/2 (12,7mm) 3/4 (19,0mm), 1 (25,4mm) Set No, Angle Price 79T ,08 79T ,08 79T ,08 79

82 HSS Aircraft Countersink - 3 Flute HSS Z Bright Finish D2 D1 D 3 L 1 Included Angle ± D¹ D² D³ (Max) L¹ Price Price Price Price Price 1/4" 6,4mm 3/8" 9,5mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 7/8" 22,2mm 1" 25,4mm 1-1/8" 28,6mm 1-1/4" 31,8mm 1-1/2" 38,1mm 2" 50,8mm 1/4" 6,4mm 1/4" 6,4mm 1/4" 6,4mm 1/4" 6,4mm 1/2" 12,7mm 1/2" 12,7mm 1/2" 12,7mm 1/2" 12,7mm 5/8" 15,9mm 3/4" 19,0mm 3/4" 19,0mm 0,070" 1,8mm 0,110" 2,8mm 0,150" 3,8mm 0,190" 4,8mm 0,230" 5,8mm 0,260" 6,6mm 0,300" 7,6mm 0,340" 8,6mm 0,380" 9,6mm 0,450" 11,4mm 0,600" 15,2mm 1-1/4" 31,8mm 1-5/8" 41,3mm 2" 50,8mm 2-1/4" 57,1mm 3" 76,2mm 3" 76,2mm 3-1/4" 82,5mm 3-1/4" 82,5mm 3-1/2" 88,9mm 3-7/8" 98,4mm 4-1/4" 107,9mm , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,54 P86 HSS Aircraft Countersink Set - 3 Flute HSS Z Bright Finish 5pc Set - 92 Set Includes - 1/4 (6,4mm), 3/8 (9,5mm), 1/2 (12,7mm) 5/8 (15,9mm) & 3/4 (19,0mm) Set No, Angle Price , , , , ,94 80

83 HSS Countersink - Single Flute HSS Z , 882 & 883 Bright Finish D2 h9 D1 D3 L 1 Included Angle D¹ D² D³ (Max) L¹ Fastner Size Price Price Price 4,3 4,0 1,3 40,0 M ,84 5,0 4,0 1,5 40,0 M2, ,84 6,0 5,0 1,5 45,0 M ,20 6,3 5,0 1,5 45,0 M , , ,20 7,0 6,0 1,8 50,0 M3, ,36 8,0 6,0 2,0 50,0 M , ,52 8,3 6,0 2,0 50,0 M , ,87 10,0 6,0 2,5 50,0 M ,52 10,4 6,0 2,5 50,0 M , ,04 11,5 8,0 2,8 56,0 M ,73 12,4 8,0 2,8 56,0 M , ,36 12,5 8,0 3,2 56,0 M , ,0 10,0 3,2 60,0 M ,56 16,0 10,0 4,0 63,0 M , ,5 10,0 3,2 60,0 M , ,71 19,0 10,0 3,5 63,0 M ,58 20,0 10,0 5,0 67,0 M , ,5 10,0 3,5 63,0 M , ,25 P86 23,0 10,0 3,8 67,0 M ,10 25,0 10,0 3,8 67,0 M , ,29 25,0 10,0 6,3 71,0 M , ,0 12,0 4,2 71,0 M ,35 81

84 HSS Countersink - Single Flute HSS Z T, 882T & 883T TiN Coated D2 h9 D1 D3 L 1 Included Angle D¹ D² D³ (Max) L¹ Fastner Size Price Price Price 4,3 4,0 1,3 40,0 M T 16,21 5,0 4,0 1,5 40,0 M2, T 16,21 6,0 5,0 1,5 45,0 M T 16,72 6,3 5,0 1,5 45,0 M T 17, T 18, T 16,72 7,0 6,0 1,8 50,0 M3, T 18,89 8,0 6,0 2,0 50,0 M T 19, T 19,05 8,3 6,0 2,0 50,0 M T 21, T 19,56 10,0 6,0 2,5 50,0 M T 22,39 10,4 6,0 2,5 50,0 M T 25, T 23,24 11,5 8,0 2,8 56,0 M T 24,38 12,4 8,0 2,8 56,0 M T 27, T 25,40 12,5 8,0 3,2 56,0 M T 25, ,0 10,0 3,2 60,0 M T 32,10 16,0 10,0 4,0 63,0 M T 34, ,5 10,0 3,2 60,0 M T 37, T 34,08 19,0 10,0 3,5 63,0 M T 47,12 20,0 10,0 5,0 67,0 M T 50, ,5 10,0 3,5 63,0 M T 53, T 48,12 23,0 10,0 3,8 67,0 M T 64,34 25,0 10,0 3,8 67,0 M T 76, T 69,85 25,0 10,0 6,3 71,0 M T 73, ,0 12,0 4,2 71,0 M T 107,94 P86 82

85 HSS Countersink - 3 Flute HSS Z , 892 & 893 Bright Finish D2 h9 D1 D3 L 1 Included Angle D¹ D² D³ (Max) L¹ Fastner Size Price Price Price 4,3 4,0 1,3 40,0 M ,84 5,0 4,0 1,5 40,0 M2, ,84 6,0 5,0 1,5 45,0 M ,20 6,3 5,0 1,5 45,0 M , , ,20 7,0 6,0 1,8 50,0 M3, ,36 8,0 6,0 2,0 50,0 M , ,52 8,3 6,0 2,0 50,0 M , ,87 10,0 6,0 2,5 50,0 M ,52 10,4 6,0 2,5 50,0 M , ,04 11,5 8,0 2,8 56,0 M ,73 12,4 8,0 2,8 56,0 M , ,36 12,5 8,0 3,2 56,0 M , ,0 10,0 3,2 60,0 M ,56 16,0 10,0 4,0 63,0 M , ,5 10,0 3,2 60,0 M , ,71 19,0 10,0 3,5 63,0 M ,58 20,0 10,0 5,0 67,0 M , P86 20,5 10,0 3,5 63,0 M , ,25 23,0 10,0 3,8 67,0 M ,10 25,0 10,0 3,8 67,0 M , ,29 25,0 10,0 6,3 71,0 M , ,0 12,0 4,2 71,0 M ,35 83

86 HSS Countersink - 3 Flute HSS Z T, 892T & 893T TiN Coated D2 h9 D1 D3 L 1 Included Angle D¹ D² D³ (Max) L¹ Fastner Size Price Price Price 4,3 4,0 1,3 40,0 M T 16,21 5,0 4,0 1,5 40,0 M2, T 16,21 6,0 5,0 1,5 45,0 M T 16,72 6,3 5,0 1,5 45,0 M T 17, T 18, T 16,72 7,0 6,0 1,8 50,0 M3, T 18,89 8,0 6,0 2,0 50,0 M T 19, T 19,05 8,3 6,0 2,0 50,0 M T 21, T 19,56 10,0 6,0 2,5 50,0 M T 22,39 10,4 6,0 2,5 50,0 M T 25, T 23,24 11,5 8,0 2,8 56,0 M T 24,38 12,4 8,0 2,8 56,0 M T 27, T 25,40 12,5 8,0 3,2 56,0 M T 25, ,0 10,0 3,2 60,0 M T 32,10 16,0 10,0 4,0 63,0 M T 34, ,5 10,0 3,2 60,0 M T 37, T 34,08 19,0 10,0 3,5 63,0 M T 47,12 20,0 10,0 5,0 67,0 M T 50, ,5 10,0 3,5 63,0 M T 53, T 48,12 23,0 10,0 3,8 67,0 M T 64,34 25,0 10,0 3,8 67,0 M T 76, T 69,85 25,0 10,0 6,3 71,0 M T 73, ,0 12,0 4,2 71,0 M T 107,94 P86 84

87 HSS Countersink Set - 3 Flute HSS Z Bright Finish 6pc Set Set Includes - 6,3mm, 8,3mm, 10,4mm 12,4mm, 16,5mm & 20,5mm Set No. Angle Price 893 6PC 90 DEG 90 46,08 HSS Countersink Set - 3 Flute HSS Z T TiN Coated 6pc Set - 893T Set Includes - 6,3mm, 8,3mm, 10,4mm 12,4mm, 16,5mm & 20,5mm Set No. Angle Price 893T 6PC 90 DEG 90 72,00 85

88 HSS & Carbide Countersink Feed Rates Uniflute countersinks are designed with cam relief, therefore feed rates should not exceed 0,125mm per revolution on larger diameter holes. Reduced feeds are recommended for smaller diameter holes. A controlled feed results in vibration-free finishes associated with Uniflute countersinks. Multiple Flute Countersink Feed Rates Multiple flute countersinks are designed for increased feed rates. Because there is more than one cutting edge, tooth loads are not excessive so vibration can be controlled, allowing higher feedrates. Speeds To determine optimum speed, start at the lower end of the cutting speed range shown in the chart below, increasing the speed until performance is maximized. When a countersink is operated at excessive RPM, vibration may result and the cutting edges can overheat and become prematurely worn. Workpiece Material Group Material Type HSS HSS TiN Coated Vc (m/min) HSS ALtima Blaze Coated Carbide Low Carbon Steels P Medium Carbon Alloy Steels Stainless Steels M Free Machining Difficult Stainless Special Alloys Cast Irons Hardened Steels S K H High Temperature Alloys Titanium Alloys Cast Iron Malleable Iron HRc HRc Non Ferrous N Aluminium Alloys Brass / Bronze Conversion Formula RPM = Vc (m/min) x 318,0 Countersink Ø * * Countersink Ø Must Be Calculated in mm (When making the calculation, use the diameter on the countersink where the cutting is actually taking place) 86

89 HSS & Carbide Minimum Body Diameter for 90 Flat Head Cap Screws (mm) Cap Screw Size (mm) Countersink Diameter (mm) M3 7,0 M4 10,0 M5 12,0 M6 14,0 M8 19,0 M10 23,0 M12 31,0 Size Diameter Gain for every 0,025mm of Axial Depth in to a Pre-Drilled Hole Included Angle Axial Depth (mm) Diameter Gain (mm) 30 0,025 0, ,025 0, ,025 0, ,025 0, ,025 0, ,025 0, ,025 0,

90 HSS & Carbide All M.A.Ford HSS countersinks are heat treated in an electronically controlled vacuum furnace. This assures precise hardening and eliminates the possibility of decarburization. All heat treating is done in our own facilities for maximum control and assurance of desired hardness and toughness. Most M.A.Ford HSS countersinks receive an additional heat treat process known as the Steam Homogeneous Process. This process is like a final tempering, relieving internal grinding stresses. The result is a much tougher cutting edge that stays sharper, longer. Additionally, the Steam Homogeneous Process provides a tough, hard, porous oxide film on the tool that is sufficient enough to retain cutting oil, further reducing frictional heat and extending tool life. Coated ALtima Blaze TiN coating Coating Properties TiN ALtima Blaze Micro Hardness (HV) Max. Working Temperature Friction Coefficient 600 C 1112 F 1100 C 2012 F 0,40 0,35 ALtima Blaze features high temperature hardness and oxidation resistance that provides extreme wear resistance under all machining conditions. TiN provides a higher surface hardness and increased lubricity over an uncoated tool. 88

91 Edgehog Carbide For aggressive cutting action, smooth operation and long tool life, M.A.Ford Edgehog carbide burrs are by far the most effective solution for even the most demanding de-burring and pre-finishing applications. Edgehog Carbide SA Edgehog Carbide SB Page All of our solid tungsten carbide rotary burrs are manufactured to the most exacting tolerances so that they run smoother and providing a highly efficient cutting operation producing a better quality finish than is possible with alternative burr tooling, such has hand ground burrs. There are well over 160 different tool shapes and sizes available in our Edgehog range of precision metric burrs range, including cylindrical, conical, ball and countersink styles to meet virtually every application. Edgehog Carbide SC Edgehog Carbide SD Edgehog Carbide SE Edgehog Carbide SF Edgehog Carbide SG Edgehog Carbide SH Edgehog Carbide SJ 98 Edgehog Carbide SK 99 Wear Safety Glasses Wear Ear Defenders Wear Protective Mask Edgehog Carbide SL Edgehog Carbide SM Wear Protective Gloves Read Instructions P01 Technical Information Edgehog Carbide SN 102 Technical Information

92 Edgehog Carbide Type A Cylinder SA D2 D1 (Nominal) L 2 (Nominal) L 1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 1,6 3,0 6,0 38,0 SA-41M SA-41M-D SA-41M-F - 7,57 2,4 3,0 11,1 38,0 SA-42M SA-42M-D SA-42M-F - 7,57 3,0 3,0 14,3 38,0 SA-43M SA-43M-D SA-43M-F - 6,86 4,0 3,0 12,7 38,0 SA-52M SA-52M-D SA-52M-F - 16,02 4,8 3,0 12,7 38,0 SA-53M SA-53M-D SA-53M-F - 17,48 6,4 3,0 12,7 51,0 SA-51M SA-51M-D SA-51M-F - 11,17 Price 6mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 6,0 12,7 50,0 SA-11M SA-11M-D ,99 4,0 6,0 16,0 50,0 SA-13M ,99 4,8 6,0 16,0 50,0 - SA-14M-D ,99 6,0 6,0 16,0 50,0 SA-1M SA-1M-D SA-1M-F - 11,44 8,0 6,0 19,0 64,0 SA-2M SA-2M-D ,13 9,5 6,0 19,0 64,0 SA-3M SA-3M-D SA-3M-F SA-3NFM 16,13 10,0 6,0 20,0 65,0 SA-3MZ SA-3MZ-D SA-3MZ-F - 15,95 11,0 6,0 25,0 70,0 SA-4M SA-4M-D ,32 12,0 6,0 25,0 70,0 SA-5MZ SA-5MZ-D ,68 12,7 6,0 25,0 70,0 SA-5M SA-5M-D SA-5M-F SA-5NFM 24,97 16,0 6,0 25,0 70,0 SA-6M SA-6M-D SA-6M-F SA-6NFM 32,16 19,0 6,0 12,7 58,0 SA-15M ,49 19,0 6,0 25,0 70,0 SA-7M SA-7M-D SA-7M-F - 51,09 25,0 6,0 25,0 70,0 SA-9M SA-9M-D SA-9M-F - 71,27 Price 3mm Shank (Extended Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 14,3 76,0 SA-43L76M SA-43L76M-D - - 9,55 Price P103 Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 90

93 Edgehog Carbide Type B Cylinder - With End Cut SB D2 D1 (Nominal) L 2 (Nominal) L 1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 6,4 3,0 4,8 43,0 SB-51M SB-51M-D SB-51M-F - 17,93 Price 6mm Shank (Standard Length) P103 D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 6,0 12,7 50,0 SB-11M SB-11M-D ,59 4,0 6,0 16,0 50,0 SB-13M SB-13M-D ,59 4,8 6,0 16,0 50,0 - SB-14M-D ,59 6,0 6,0 16,0 50,0 SB-1M SB-1M-D SB-1M-F - 13,70 8,0 6,0 19,0 64,0 SB-2M SB-2M-D SB-2M-F - 18,21 9,5 6,0 19,0 64,0 SB-3M SB-3M-D SB-3M-F SB-3NFM 19,37 10,0 6,0 20,0 65,0 SB-3MZ SB-3MZ-D SB-3MZ-F - 19,10 11,0 6,0 25,0 70,0 SB-4M SB-4M-D ,38 12,0 6,0 25,0 70,0 SB-5MZ SB-5MZ-D SB-5MZ-F - 29,65 12,7 6,0 25,0 70,0 SB-5M SB-5M-D - SB-5NFM 30,01 16,0 6,0 25,0 70,0 SB-6M SB-6M-D ,56 19,0 6,0 19,0 64,0 - SB-16M-D ,28 19,0 6,0 25,0 70,0 - SB-7M-D SB-7M-F - 51,09 25,0 6,0 25,0 70,0 SB-9M SB-9M-D ,58 Price Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 91

94 Edgehog Carbide Type C Ball Nosed Cylinder SC D2 L 2 (Nominal) D1 (Nominal) L 1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 2,4 3,0 3,0 38,0 SC-41M SC-41M-D SC-41M-F - 7,57 3,0 3,0 3,0 38,0 SC-42M SC-42M-D SC-42M-F - 6,66 4,0 3,0 3,0 38,0 SC-52M SC-52M-D SC-52M-F - 18,28 4,8 3,0 3,0 38,0 SC-53M SC-53M-D SC-53M-F - 16,41 6,4 3,0 3,0 51,0 SC-51M SC-51M-D SC-51M-F - 11,17 Price 6mm Shank (Standard Length) D¹ D² L² L¹ 3mm Shank (Extended Length) Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 6,0 12,7 50,0 - SC-11M-D ,13 4,0 6,0 16,0 50,0 SC-13M SC-13M-D ,13 4,8 6,0 16,0 50,0 SC-14M SC-14M-D ,13 6,0 6,0 16,0 50,0 SC-1M SC-1M-D SC-1M-F - 13,61 8,0 6,0 19,0 64,0 SC-2M SC-2M-D SC-2M-F - 16,68 9,5 6,0 19,0 64,0 SC-3M SC-3M-D SC-3M-F SC-3NFM 17,84 10,0 6,0 20,0 65,0 SC-3MZ SC-3MZ-D SC-3MZ-F - 17,66 11,0 6,0 25,0 70,0 SC-4M SC-4M-D ,19 12,0 6,0 25,0 70,0 SC-5MZ SC-5MZ-D SC-5MZ-F - 27,76 12,7 6,0 25,0 70,0 SC-5M SC-5M-D SC-5M-F SC-5NFM 28,10 16,0 6,0 25,0 70,0 SC-6M SC-6M-D SC-6M-F SC-6NFM 38,47 19,0 6,0 25,0 70,0 SC-7M SC-7M-D ,15 25,0 6,0 25,0 70,0 SC-9M SC-9M-D ,49 Price D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 14,3 76,0 SC-42L76M SC-42L76M-D - - 9,37 Price 6mm Shank (Extended Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 6,0 6,0 16,0 166,0 SC-1L6M ,03 9,5 6,0 19,0 169,0 SC-3L6M ,05 12,7 6,0 25,0 175,0 SC-5L6M SC-5L6M-D SC-5L6M-F - 39,27 Price P103 Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 92

95 Edgehog Carbide Type D Ball SD D2 L 1 (Nominal) L 2 (Nominal) D1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 2,4 3,0 2,0 38,0 SD-41M SD-41M-D SD-41M-F - 7,31 3,0 3,0 2,8 38,0 SD-42M SD-42M-D SD-42M-F - 6,66 4,8 3,0 4,0 38,0 SD-53M SD-53M-D SD-53M-F - 16,41 6,4 3,0 5,6 44,0 SD-51M SD-51M-D SD-51M-F - 11,17 Price 6mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 6,0 2,8 50,0 SD-11M SD-11M-D ,06 4,8 6,0 4,0 50,0 SD-14M SD-14M-D SD-14M-F - 14,06 6,0 6,0 5,0 50,0 SD-1M SD-1M-D SD-1M-F - 12,61 8,0 6,0 6,0 51,0 SD-2M SD-2M-D ,42 9,5 6,0 7,0 53,0 SD-3M SD-3M-D SD-3M-F SD-3NFM 14,70 10,0 6,0 7,0 54,0 SD-3MZ SD-3MZ-D SD-3MZ-F - 16,02 11,0 6,0 8,0 54,0 SD-4M SD-4M-D SD-4M-F - 16,75 12,0 6,0 9,5 56,0 SD-5MZ ,55 12,7 6,0 10,0 56,0 SD-5M SD-5M-D SD-5M-F SD-5NFM 20,19 16,0 6,0 13,0 59,0 SD-6M SD-6M-D SD-6M-F SD-6NFM 25,05 19,0 6,0 16,0 62,0 SD-7M SD-7M-D ,60 25,0 6,0 21,0 68,0 SD-9M SD-9M-D ,05 3mm Shank (Extended Length) Price D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 2,8 76,0 SD-42L76M SD-42L76M-D - - 9,37 Price 6mm Shank (Extended Length) P103 D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 6,0 6,0 5,0 155,0 - SD-1L6M-D ,57 8,0 6,0 6,0 159,0 - SD-2L6M-D ,19 9,5 6,0 7,0 161,0 SD-3L6M SD-3L6M-D SD-3L6M-F - 20,55 12,7 6,0 10,0 164,0 SD-5L6M SD-5L6M-D SD-5L6M-F - 28,21 Price Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 93

96 Edgehog Carbide Type E Oval SE D2 L 1 (Nominal) L 2 (Nominal) D1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 5,6 38,0 SE-41M SE-41M-D SE-41M-F - 6,86 4,8 3,0 7,0 38,0 SE-53M SE-53M-D ,48 6,4 3,0 9,5 48,0 SE-51M SE-51M-D SE-51M-F - 11,17 Price 6mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 6,0 6,0 9,5 50,0 SE-1M SE-1M-D ,21 8,0 6,0 16,0 60,0 - SE-2M-D ,64 9,5 6,0 16,0 60,0 SE-3M SE-3M-D SE-3M-F SE-3NFM 18,21 12,7 6,0 22,0 67,0 SE-5M SE-5M-D SE-5M-F SE-5NFM 26,68 16,0 6,0 25,0 70,0 SE-6M SE-6M-D - SE-6NFM 39,63 19,0 6,0 25,0 70,0 SE-7M SE-7M-D ,50 Price 3mm Shank (Extended Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 5,6 76,0 SE-41L76M ,55 Price 6mm Shank (Extended Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 9,5 6,0 16,0 166,0 SE-3L6M SE-3L6M-D ,50 12,7 6,0 22,0 172,0 SE-5L6M SE-5L6M-D ,31 Price P103 Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 94

97 Edgehog Carbide Type F Ball Nosed Tree SF D2 L 1 (Nominal) L 2 (Nominal) D1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 6,0 38,0 SF-41M SF-41M-D SF-41M-F - 7,57 3,0 3,0 12,7 38,0 SF-42M SF-42M-D SF-42M-F - 6,86 4,8 3,0 12,7 38,0 SF-53M SF-53M-D SF-53M-F - 17,48 6,4 3,0 12,7 51,0 SF-51M SF-51M-D SF-51M-F - 11,17 Price 6mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 6,0 12,7 50,0 SF-11M SF-11M-D SF-11M-F - 15,77 6,0 6,0 16,0 50,0 SF-1M SF-1M-D SF-1M-F - 14,13 9,5 6,0 19,0 64,0 SF-3M SF-3M-D - SF-3NFM 17,48 11,0 6,0 25,0 70,0 SF-4M SF-4M-D ,48 12,0 6,0 25,0 70,0 SF-5MZ SF-5MZ-D SF-5MZ-F - 25,85 12,7 6,0 19,0 64,0 SF-13M SF-13M-D SF-13M-F - 25,85 12,7 6,0 25,0 70,0 SF-5M SF-5M-D SF-5M-F SF-5NFM 25,85 16,0 6,0 25,0 70,0 SF-6M SF-6M-D SF-6M-F SF-6NFM 38,93 19,0 6,0 25,0 70,0 SF-7M SF-7M-D SF-7M-F - 53,42 19,0 6,0 31,0 76,0 SF-14M SF-14M-D ,21 Price 3mm Shank (Extended Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 12,7 76,0 SF-42L76M SF-42L76M-D - - 9,55 Price 6mm Shank (Extended Length) P103 D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 6,0 6,0 16,0 166,0 SF-1L6M SF-1L6M-D SF-1L6M-F - 19,83 9,5 6,0 19,0 169,0 SF-3L6M SF-3L6M-D ,52 12,7 6,0 25,0 175,0 SF-5L6M SF-5L6M-D ,22 Price Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 95

98 Edgehog Carbide Type G Tree SG D2 L 1 (Nominal) D1 (Nominal) L 2 (Nominal) 3mm Shank (Standard Length) D3 (Nominal) D¹ D² L² L¹ D 3 Standard Cut Alt Diamond Fine Cut Shear Cut Price 3,0 3,0 6,0 38,0 0,46 SG-41M SG-41M-D SG-41M-F - 7,57 3,0 3,0 8,0 38,0 0,46 SG-42M SG-42M-D SG-42M-F - 7,57 3,0 3,0 9,5 38,0 0,46 SG-43M SG-43M-D SG-43M-F - 6,86 4,8 3,0 12,7 38,0 0,64 SG-53M SG-53M-D SG-53M-F - 16,02 6,4 3,0 12,7 51,0 0,76 SG-51M SG-51M-D SG-51M-F - 11,90 6mm Shank (Standard Length) D¹ D² L² L¹ D 3 Standard Cut Alt Diamond Fine Cut Shear Cut Price 6,0 6,0 16,0 50,0 0,76 SG-1M SG-1M-D SG-1M-F - 14,13 8,0 6,0 19,0 64,0 1,02 SG-2M SG-2M-D SG-2M-F - 19,19 9,5 6,0 19,0 64,0 1,02 SG-3M SG-3M-D SG-3M-F - 19,10 10,0 6,0 20,0 65,0 1,14 SG-3MZ SG-3MZ-D SG-3MZ-F - 18,48 12,0 6,0 25,0 70,0 1,27 SG-5MZ SG-5MZ-D SG-5MZ-F - 25,16 12,7 6,0 19,0 64,0 1,27 SG-13M SG-13M-D SG-13M-F - 25,96 12,7 6,0 25,0 70,0 1,27 SG-5M SG-5M-D SG-5M-F - 25,96 16,0 6,0 25,0 70,0 1,27 SG-6M SG-6M-D SG-6M-F - 38,38 19,0 6,0 25,0 70,0 1,27 SG-7M SG-7M-D SG-7M-F - 53,42 19,0 6,0 38,0 84,0 1,78 SG-15M SG-15M-D SG-15M-F - 78,92 3mm Shank (Extended Length) D¹ D² L² L¹ D 3 Standard Cut Alt Diamond Fine Cut Shear Cut Price 3,0 3,0 8,0 76,0 0,46 SG-42L76M SG-42L76M-D ,64 3,0 3,0 9,5 76,0 0,46 SG-43L76M SG-43L76M-D - - 9,55 6mm Shank (Extended Length) D¹ D² L² L¹ D 3 Standard Cut Alt Diamond Fine Cut Shear Cut Price 6,0 6,0 16,0 166,0 0,76 SG-1L6M SG-1L6M-D SG-1L6M-F - 19,83 9,5 6,0 19,0 169,0 1,02 - SG-3L6M-D SG-3L6M-F - 26,68 12,7 6,0 25,0 175,0 1,27 - SG-5L6M-D SG-5L6M-F - 36,31 P103 Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 96

99 Edgehog Carbide Type H Flame SH D2 L 1 (Nominal) L 2 (Nominal) D1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 6,0 38,0 SH-41M SH-41M-D SH-41M-F - 6,86 4,8 3,0 9,5 38,0 SH-53M SH-53M-D SH-53M-F - 17,48 Price 6mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 6,0 6,0 16,0 50,0 SH-1M SH-1M-D SH-1M-F - 18,55 8,0 6,0 19,0 64,0 SH-2M SH-2M-D SH-2M-F - 20,90 12,7 6,0 31,0 76,0 SH-5M SH-5M-D SH-5M-F - 38,11 16,0 6,0 36,0 81,0 SH-6M SH-6M-D SH-6M-F - 58,84 19,0 6,0 41,0 86,0 SH-7M SH-7M-D SH-7M-F - 74,52 Price 3mm Shank (Extended Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 6,0 76,0 SH-41L76M SH-41L76M-D - - 9,55 Price 6mm Shank (Extended Length) P103 D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 8,0 6,0 19,0 169,0 SH-2L6M SH-2L6M-D SH-2L6M-F - 29,19 12,7 6,0 31,0 181,0 SH-5L6M SH-5L6M-D SH-5L6M-F - 53,33 Price Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 97

100 Edgehog Carbide Type J Countersink 60 SJ D2 60 +/-1 (Reference) D1 (Nominal) D3 (Nominal) L1 (Nominal) L 2 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 2,4 38,0 SJ-42M SJ-42M-D SJ-42M-F - 7,31 3,0 3,0 2,4 38,0 - SJ-82M-D* ,17 * SJ-82M-D is double ended Price 6mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 6,0 6,0 4,8 50,0 SJ-1M SJ-1M-D ,61 9,5 6,0 8,0 55,0 SJ-3M SJ-3M-D ,66 12,7 6,0 11,0 58,0 SJ-5M SJ-5M-D ,63 16,0 6,0 12,7 62,0 SJ-6M SJ-6M-D ,68 19,0 6,0 14,0 64,0 SJ-7M SJ-7M-D ,96 25,0 6,0 21,0 70,0 SJ-9M SJ-9M-D ,41 Price P103 Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 98

101 Edgehog Carbide Type K Countersink 90 SK D2 90 +/-1 (Reference) D1 (Nominal) D3 (Nominal) L1 (Nominal) L 2 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 1,6 38,0 SK-42M SK-42M-D - - 8,64 3,0 3,0 1,6 38,0 SK-82M* SK-82M-D* ,71 * SK-82M is double ended Price 6mm Shank (Standard Length) P103 D¹ D² L² L¹ Standard Cut Alt Diamond Fine Cut Shear Cut 6,0 6,0 3,0 50,0 SK-1M SK-1M-D ,08 9,5 6,0 4,8 52,0 SK-3M SK-3M-D ,66 12,7 6,0 6,4 53,0 SK-5M SK-5M-D ,63 16,0 6,0 8,0 56,0 SK-6M SK-6M-D ,39 19,0 6,0 9,5 58,0 SK-7M SK-7M-D ,93 25,0 6,0 12,7 61,0 SK-9M SK-9M-D ,28 Price Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 99

102 Edgehog Carbide Type L Ball Nosed Cone SL D2 A +/-1 (Reference) R (Nominal) D1 (Nominal) L 2 (Nominal) L 1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ A Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 9,5 38,0 8 SL-41M SL-41M-D SL-41M-F - 7,31 3,0 3,0 12,7 38,0 8 SL-42M SL-42M-D SL-42M-F - 6,86 4,8 3,0 12,7 38,0 14 SL-53M SL-53M-D SL-53M-F - 18,28 Price 6mm Shank (Standard Length) D¹ D² L² L¹ A Standard Cut Alt Diamond Fine Cut Shear Cut Price 6,0 6,0 16,0 50,0 14 SL-1M SL-1M-D SL-1M-F - 15,50 8,0 6,0 24,0 71,0 14 SL-2M SL-2M-D SL-2M-F - 21,26 9,5 6,0 28,0 75,0 14 SL-3M SL-3M-D SL-3M-F SL-3NFM 22,81 12,7 6,0 30,0 76,0 14 SL-4M SL-4M-D SL-4M-F SL-4NFM 27,76 16,0 6,0 33,0 80, SL-6M-D SL-6M-F SL-6NFM 58,48 19,0 6,0 39,0 86,0 14 SL-7M SL-7M-D SL-7M-F - 80,65 3mm Shank (Extended Length) D¹ D² L² L¹ A Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 12,7 76,0 8 SL-42L76M SL-42L76M-D - - 9,55 Price 6mm Shank (Extended Length) D¹ D² L² L¹ A Standard Cut Alt Diamond Fine Cut Shear Cut Price 8,0 6,0 24,0 176, SL-2L6M-F - 32,80 9,5 6,0 28,0 180,0 14 SL-3L6M SL-3L6M-D SL-3L6M-F - 31,89 12,7 6,0 30,0 182,0 14 SL-4L6M SL-4L6M-D SL-4L6M-F - 38,93 P103 Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 100

103 Edgehog Carbide Type M Cone SM D2 3mm Shank (Standard Length) D¹ D² L² L¹ A D 3 Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 4,8 38,0 32 0,46 SM-45M SM-45M-D SM-45M-F - 7,31 3,0 3,0 9,5 38,0 12 1,09 SM-41M SM-41M-D SM-41M-F - 7,57 3,0 3,0 11,1 38,0 14 0,36 SM-42M SM-42M-D SM-42M-F - 6,66 3,0 3,0 16,0 38,0 7 1,14 SM-43M SM-43M-D SM-43M-F - 6,86 4,8 3,0 12,7 38,0 16 0,97 SM-53M SM-53M-D SM-53M-F - 18,28 6,4 3,0 12,7 54,0 22 1,32 SM-51M SM-51M-D SM-51M-F - 11,90 Price 6mm Shank (Standard Length) D¹ D² L² L¹ A D 3 Standard Cut Alt Diamond Fine Cut Shear Cut Price 6,0 6,0 12,7 50,0 22 1,17 SM-1M SM-1M-D SM-1M-F - 14,70 6,0 6,0 19,0 50,0 14 1,42 SM-2M SM-2M-D SM-2M-F - 15,50 6,0 6,0 25,0 50,0 10 1,65 SM-3M SM-3M-D SM-3M-F - 16,57 9,5 6,0 16,0 63,0 28 1,32 SM-4M SM-4M-D SM-4M-F - 22,88 12,7 6,0 22,0 69,0 28 1,32 SM-5M SM-5M-D SM-5M-F - 28,65 16,0 6,0 25,0 72,0 31 1,52 SM-6M SM-6M-D SM-6M-F - 42,53 3mm Shank (Extended Length) P103 D¹ D² L² L¹ A D 3 Standard Cut Alt Diamond Fine Cut Shear Cut 3,0 3,0 11,0 76,0 14 0,36 SM-42L76M SM-42L76M-D - - 9,37 Price Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 101

104 Edgehog Carbide Type N Inverted Cone SN D2 L 2 (Nominal) D1 (Nominal) A +/-1 (Reference) L 1 (Nominal) 3mm Shank (Standard Length) D¹ D² L² L¹ A Standard Cut Alt Diamond Fine Cut Shear Cut 2,4 3,0 3,0 38,0 10 SN-41M SN-41M-D SN-41M-F - 7,57 3,0 3,0 4,8 38,0 10 SN-42M SN-42M-D SN-42M-F - 9,82 4,8 3,0 6,4 38,0 10 SN-53M SN-53M-D SN-53M-F - 18,28 6,4 3,0 6,4 44,0 10 SN-51M SN-51M-D SN-51M-F - 12,42 Price 6mm Shank (Standard Length) D¹ D² L² L¹ A Standard Cut Alt Diamond Fine Cut Shear Cut 6,0 6,0 8,0 50, SN-1M-D SN-1M-F - 15,50 9,5 6,0 9,5 55,0 13 SN-2M SN-2M-D SN-2M-F - 22,54 12,7 6,0 12,7 58,0 28 SN-4M SN-4M-D SN-4M-F - 31,89 16,0 6,0 19,0 64,0 18 SN-6M SN-6M-D SN-6M-F - 40,91 19,0 6,0 16,0 61, SN-7M-D SN-7M-F - 45,86 Price P103 Note: 12,0mm and above are available with an 8,0mm shank on request as a non-stock standard. 102

105 Technical Data Carbide Burr Fluting Chart Burr Ø Number Of Flutes ( ± 10% ) Standard Cut Fine Cut Shear Cut Recommended Operating Speeds Burr Diameter Ø mm Operating Speed RPM From To 1, , , , , , , , , , , * 16, ** 19, , ,0 45,000 90,000 6,0 23,000 45,000 9,5 19,000 30,000 12,7 15,000 22,000 16,0 12,000 18,000 19,0 7,500 15,000 The speed guidelines above are general recommendations. Speeds may require adjusting based on material and application. * Except SL-4NFM - 6 Flutes ** Except SD-6NFM, SE-6NFM and SF-6NFM - 10 Flutes. Alternate Diamond Grind - LH Fluting 40% of RH Fluting Diamond Grind - LH Fluting 80% of RH Fluting. Burr Application By Material Material Standard Cut Alt Diamond Cut Fine Cut Shear Cut Aluminium - Brass, Bronze, Copper - - Carbon Cast Iron Fibreglass Hard Rubber - - Magnesium Masonite - - Plastics - - Steels HRc - Steels, Alloy Steels - - Nickel/Chrome Steels - - Stainless Steels - Steel Weldments - - Titanium - - Wood Zinc

106 Carbide Problems and Solutions Possible Causes Excessive Force Shank Friction With Workpiece Worn Burr Incorrect Collet Location Worn Grinder Bearings Poor Shank Straightness Unstable Workpiece Working in Soft Materials Cutting Abrasive Material Low Setup Rigidity Broken Brazed Joint Poor Burr Control Flutes Clogging Problem Excessive Vibration Poor Finish Poor Tool Life Possible Causes Problem Reduce Cutting Pressure Ensure Shank / Workpiece Clearance Replace Worn Burr Check Burr Location & Replace Collet if Necessary Check & Replace Grinder Bearings if Necessary Check Shank Straightness - Replace Burr if Necessary Improve Workpiece Stability Broken Brazed Joint Poor Burr Control Flutes Clogging Excessive Vibration Poor Finish Poor Tool Life Possible Causes Use a Coarser Cut Burr Use Lubricant or Anti-Sticking Agent Increase RPM Reduce RPM Make Lighter Cuts Change to a Finer Cut Burr Faster Feed Slower Feed Broken Brazed Joint Poor Burr Control Problem Flutes Clogging Excessive Vibration Poor Finish - - Poor Tool Life

107 Re-grinds & re-manufacture Special designs with a special service Sometimes, even our extraordinarily advanced tooling range can t meet every need off-the-shelf, which is where M.A.FORD Europe Custom Tools Division, our specialist custom tool design, production, regrind and remanufacture facility can provide the perfect solution for your needs. Whether you have a specialised requirement for a custom tool form, length or material, our team can help you design, develop and create dedicated, application specific tooling that not only does the job, but is also manufactured to the excellent quality and precision standards expected from M.A.FORD. From precision drills, taps, milling tools and cutters for high performance composites, through to special punches, press tool dies and rotary broaches, we have the expertise, facilities and experience to produce advanced special purpose tools, which are used in a diverse range of manufacturing environments. From agriculture to aerospace and motorsport to medical, we ve got it covered. In addition, for more than 30 years, we have provided a precision tool regrind, remanufacture and modification service to businesses in the UK and Europe, which allows worn tools to be revitalised and ensure that their productive working life can be increased at a fraction of the cost of making a new tool. Like all our precision solutions, our regrinding service is managed and carried out by highly skilled manufacturing professionals to ensure that every customer receives the same high quality support and service that has been a key factor in why M.A.FORD Europe Custom Tools Division s customers keep returning. For further information please contact: Tel: +44 (0) Royds Farm Road, Leeds, West Yorkshire, LS12 6DX, UK Tel: +44 (0) sales@mafordeurope.com

108 Where high performance is the standard M.A. Ford Europe Ltd. Unit 38, Royal Scot Road Pride Park, Derby DE24 8AJ United Kingdom Also available: Phone: +44(0) Fax: +44(0) DM ISO 9001:2008 Certified Distributed by: Ambachtsstraat TP Rijssen Postbus AA Rijssen Tel. +31 (0) Fax +31 (0)