ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
|
|
- Ursula Cobb
- 5 years ago
- Views:
Transcription
1
2 Table of Contents Toolholders Toolholders CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid Carbide Key s CAT50 Boring Head Holders TG150 Collets Carbide Head Key s 1/2" Steel Shank CAT50 Stub Arbor Holders and Parts Bilz Tap Collets Carbide Head Key s 3/8" Steel Shank Table of Contents CAT50 Slitting Saw Holders and Parts CAT50 Jacobs Taper Holders, Drill Chucks & Parts CAT50 Morse Taper Holders CAT40 & CAT50 Accessories Retention Knobs for Standard and Coolant Thru Vertical/Horizontal Setup Holding Fixture ER16 Coolant Seals ER20 Coolant Seals Carbide 15 Dovetail s Carbide 30 Dovetail s Carbide 45 Dovetail s Carbide 60 Dovetail s ER11 Collet Sets and Collets ER25 Coolant Seals Chamfer Mills NEW Products 459 ER16 Collet Sets and Collets ER32 Coolant Seals Carbide 2-Flute, Chamfer Mills for Aluminum, Single End NEW Products 460 ER20 Collet Sets and Collets ER40 Coolant Seals Carbide 4-Flute, Chamfer Mills for Steel, Single End NEW Products 461 ER25 Collet Sets and Collets TG100 Series Coolant Seals Carbide 2-Flute, Chamfer Mills for Aluminum, Double-End 436 NEW Products 462 ER32 Collet Sets and Collets Carbide 4-Flute Chamfer Mills for Steel, Double-End 8
3 Key s - Solid Carbide Key s Teeth OAL Shk RKC / RKC RKC /16 1/ RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC / RKC RKC RKC RKC RKC RKC RKC RKC / RKC RKC RKC RKC RKC Co n t i n u e d Technical data found on page
4 - Key s Co n t i n u e d Fr o m Solid Carbide Key s 1/2 Teeth OAL Shk RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC Technical data found on page
5 Key s - Carbide Head Key s 1/2" Steel Shank Teeth OAL Shk RKC / RKC RKC /16 1/2 9/ RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC / RKC RKC RKC RKC RKC RKC RKC RKC / RKC RKC Co n t i n u e d Technical data found on page
6 - Key s Co n t i n u e d Fr o m Carbide Head Key s 1/2" Steel Shank Teeth OAL Shk 3/4 7/ RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC Co n t i n u e d Technical data found on page
7 Key s - Co n t i n u e d Fr o m Carbide Head Key s 1/2" Steel Shank 1-1/8 1-1/4 1-1/2 Teeth OAL Shk RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC Technical data found on page
8 - Key s Carbide Head Key s 3/8" Steel Shank 1/2 5/8 3/4 Teeth OAL Shk RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC RKC Technical data found on page
9 Dovetail s - Carbide 15 Dovetail s Angle per Side of Cut OAL Shk Teeth 3/ /4 RDC / /4 RDC / /4 RDC / /4 RDC / /4 RDC / /4 RDC Carbide 30 Dovetail s Angle per Side of Cut OAL Shk Teeth 1/ /16 RDC / /4 RDC / /4 RDC / /4 RDC / /4 RDC / /4 RDC / /4 RDC
10 - Dovetail s Carbide 45 Dovetail s Angle per Side of Cut OAL Shk Teeth 1/ / /16 RDC / / /4 RDC / / /4 RDC / / /4 RDC / / /4 RDC / / /4 RDC / / /4 RDC Carbide 60 Dovetail s Angle per Side of Cut OAL Shk Teeth 3/ / /4 RDC / / /4 RDC / / /4 RDC / / /4 RDC / / /4 RDC / / /4 RDC
11 Chamfer Mills - AlTiN Coated Carbide 2-Flute, Chamfer Mills, Single End Included Angle Decimal Equiv OAL Shk AlTiN Coated 1/ /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM
12 - Chamfer Mills AlTiN Coated Carbide 4-Flute, Chamfer Mills, Single End Included Angle Decimal Equiv OAL Shk AlTiN Coated 1/ /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /2 1/8 RCM RCM / /2 1/4 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM
13 Chamfer Mills - AlTiN Coated Carbide 2-Flute, Chamfer Mills, Double End Included Angle Decimal Equiv OAL Shk AlTiN Coated 1/ /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM
14 - Chamfer Mills AlTiN Coated Carbide 4-Flute, Chamfer Mills, Double End Included Angle Decimal Equiv OAL Shk AlTiN Coated 1/ /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM / /8 RCM RCM / /2 3/16 RCM RCM / /2 1/4 RCM RCM / /2 5/16 RCM RCM / /2 3/8 RCM RCM / /2 RCM RCM
15 Edge Breakers - Carbide Edge Breakers Chamfer Size OAL Shk /8 REB /8 REB /16 REB /16 REB /16 REB /16 REB /4 REB /4 REB /4 REB /4 REB /16 REB /16 REB /16 REB /16 REB /8 REB /8 REB /8 REB /8 REB /2 REB /2 REB /2 REB
16 - Engraving Tools Carbide Standard Point Engraving Tools Included Angle Shk OAL Tip 30 1/ RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET
17 Engraving Tools - Carbide Fine Point Engraving Tools Included Angle Shk OAL Tip 40 1/ RET / RET / RET Carbide Soft Material Engraving Tools Included Angle Shk OAL Tip 40 1/ RET / RET / RET / RET / RET / RET / RET / RET / RET
18 - Engraving Tools Carbide Standard Point Extra Long Engraving Tools Included Angle Shk OAL Tip 40 1/ RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET Carbide Standard Point Double-End Engraving Tools Included Angle Shk OAL Tip 30 1/ RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET / RET
19 Technical Information - Key s Speeds Speeds Formula for Calculating RPM Workpiece Material Speed (SFM) Aluminum ( ) 300 Brass 250 Bronze 230 Copper ( ) 100 Copper ( ) 200 Cast Iron - Ductile 180 Cast Iron - Gray 140 Cast Iron - Malleable 100 Hastelloy 80 Inconel 80 Magnesium (AZ, AM, EZ, ZE, HK) 300 Monel 80 Nickel ( ) 80 Nylon 200 Phenolic 180 Plastic - Glass Filled 150 Stainless Steel ( ) 100 Stainless Steel ( ) 110 Stainless Steel (15-5PH, 16-6PH, 14-4PH) 120 Steel ( ) 180 Steel ( ) 180 Steel ( ) 170 Steel (10L45-10L50) 165 Steel (12L13-12L15) 160 Steel ( ) 140 Steel (4140 (35 HRC)) 130 Steel (41L30-41L50) 150 Steel ( ) 120 Steel (A2-A9, 01-07) 80 Steel (D2-D7) 90 Steel (H10-H19) 100 Steel (M1-M6) 110 Steel (M-50, 52100) 60 Steel (W1, W2) 70 Titanium (TI-9AI-6V) 90 Teflon 200 Waspalloy 80 SFM X 4 = F F Diameter of = RPM EXAMPLE: 1/2" in Aluminum SFM (300) X 4 = 1200 (F) 1200 (F).500 = 2400 RPM Feeds Formula for Calculating IPM.001 X of Teeth in X RPM = IPM EXAMPLE: 1/2" in Aluminum.001 X 6 X 2400 = 14.4 IPM - Tech Info NOTES: Speeds and Feeds listed are estimated and will vary by application
Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
More informationSolid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationPYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationSeries Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationP: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationList No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationSMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
More informationBody Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
More informationSection S. weight tables
Section S weight tables steel bars Rounds... 2-3 Squares... 3 Hexagons... 4 Octagons... 4 Flats... 5-8 Steel circles... 9-10 Steel and Aluminum weight formulas... 11 Bars, Tubing, Circles, Rings Weight
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationCOOLANT-FED TOOLING & SYSTEMS
V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL
More informationHPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
More informationSIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
More informationRotary Cutting Tools Metric. ISO 9001:2008 CERTIFIED. Cutting Edge Technology Made in the U.S.A.
Rotary Cutting Tools 200 Metric ISO 900:2008 CERTIFIED Cutting Edge Technology Made in the U.S.A. TABLE OF CONTENTS CATEGORY PAGE # Endmill Data 2 Terms & Conditions 3 Materials Index 3 Milling Procedures
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationCALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
More informationDRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More information2007 Product Catalog
2007 Product Catalog Get your money s worth and more. Power. Precision. Performance. Everything you need to make your operation more efficient, more productive and more profitable. It s all there, in every
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationNewest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform!
Newest Addition The Tuffness Of The 205 Series Hi-Tuff Drill On A Micro Drill Platform! Micro -Tuff Micro Drill Micro Drills NEW Addition Micro -Tuff 305 Series Micro Drill Web-Thinned Point 4-Facet Point
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationExpanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads
Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market
More informationRotary Cutting Tools. Metric. ISO 9001:2008 CERTIFIED. Cutting Edge Technology Made in the U.S.A.
Rotary Cutting Tools Metric ISO 900:2008 CERTIFIED Cutting Edge Technology Made in the U.S.A. Table of Contents Category Page # Terms & Conditions 3 Coatings 3 Endmills: 4 32 Endmill Data 4 5 Endmills
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationCarbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationREPLACEABLE TIP DRILLS
REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationDrills Jobber, DXJ D D D D
Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910
More informationDrilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
More information2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationhole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
More informationVARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY.
PM4200 MILLING MACHINE VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY. Quality Machine Design with Power-Packed Performance Precision machined dovetail ways and adjustable gibs
More informationTable of Contents. Table of Contents. Metalworking Lubricants. Specialty Tools. Metalworking Lubricants. Edge Breakers.
Table of Contents Specialty Tools Edge Breakers Accessories 463 Basic Oil Refractometer 469 Carbide Edge Breakers Flat Belt Oil Skimmer 469 Engraving Tools Economy Mixer 470 464 Carbide Standard Point
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationWorld Class Manufacturer of Rotary Cutting Tools
World Class Manufacturer of Rotary Cutting Tools Our History About Mastercut 1985 Incorporated in Safety Harbor, FL 1986 Form grinding and brazing operations are added 1989 Company builds its first machine
More informationMOLD GRINDING POLISHING
G At M.A.Ford, we pride ourselves on being one of the world s premier manufacturers of high performance cutting tools. That s as true today as it was back in 1919 when Matthew A. Ford produced the first
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationNew Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More information8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
More informationYE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationPages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations
pplication Index,,, 130 High Performance rill Pages 2-3 Standard Straight Shank Holder Pages 14-16,, F, G, H 130 High Performance rill and dapter (sold separately) Pages 4-7 Standard Taper Shank Holder
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationMHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
More informationPCD & CBN TANGENTIAL MILLING
& TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationNo. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationOperation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation. Figure l
Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation Major Components Figure l Basic Operation: High pressure coolant enters the Titespot Angle Head and drives an integral
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationTPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationSolid Carbide Performance Routers
Solid Carbide Routers Hard Wood Soft Wood MDF Hard Plywood Soft Plywood Composite Wood Laminated Wood Chipboard Manufactured in Manufactured inthe theusa USA Distributed in Distributed inthe theuk UK Solid
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationCnC woodworking Collets
CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ
More informationDRILL CHUCKS-KEY TYPE
HUK JWS LTHE WORKHOLDING MHINE VISES RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DRILL HUKS-KEY TYPE LL ERING HUKS all
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationTable of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
More informationHSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
More informationP&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
More information