HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

Size: px
Start display at page:

Download "HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,"

Transcription

1 Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks in accordance with 336 Part 1. Countersinks for through-holes in accordance with EN ground for steel to 9 N/mm 2, aluminium alloys, brass, bronze N for d 1 x d 2 l 2 l Thread M 3 2,5 x 3,4 8, M 4 3,3 x 4,5 11, M 5 4,2 x 5,5 13, Step drills for d 1 x d 2 l 2 l Thread M 3 3,4 x 6, M 4 4,5 x 9, M 5 5,5 x 11, M 6 6,6 x 13, M 8 9, x 17, Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA-steel<9N VA-steel>9N Ti-alloys GG(G) plastics T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing screw through-holes EN 2273, screw-head countersinks shape A medium in accordance with 74 Part 1. Screw countersinks 963 to 966. ground for steel to 9 N/mm 2, aluminium alloys, brass, bronze Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA-steel<9N VA-steel>9N Ti-alloys GG(G) plastics for d 1 x d 2 l 2 l Thread M 6 5, x 6,6 16, M 8 6,8 x 9, 21, M 1 8,5 x 11, 25, N Step drills T - Countersink angle 18 - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing screw through-holes EN 2273, screw-head countersinks shape H, J and K. Version medium in accordance with 74 Part 2. Cheese head screws in accordance with 84, 912, 6912, 7513, ground for steel to 9 N/mm 2, cast iron, aluminium alloys, brass, bronze With straight shank With Morse taper shank. Straight shank Morse taper shank for d 1 x d 2 l 2 l 1 shank Thread MT M 3 3,4 x 6, M 4 4,5 x 8, M 5 5,5 x 1, M 6 6,6 x 11, M 8 9, x 15, M 8 9, x 15, M 1 11, x 18, M 1 11, x 18, M 12 13,5 x 2, M 16 17,5 x 26, M 2 22, x 33, N Fax order hotline:

2 Short step drills T - With straight shank - Cone envelope grind - Web-thinned chisel edge ground for steel to 9 N/mm 2, cast iron, aluminium alloys, brass, bronze Countersink angle. For threaded core holes 336 Part 1. Countersinks for through-holes EN 2273 medium Countersink angle. For screw through-holes EN Countersinks 74 Part 1 fine, countersunk screws EN ISO 29 and 21. N Drilling Tools 1868 Countersink angle 18. For screw through-holes EN Screw-head countersinks, shape H, J, K Part 2 medium. Cheese head screws EN ISO 4762, EN ISO 127, 6912, 7513, for d 1 x d 2 l 2 l thread M 3 2,5 x 3,4 8, M 4 3,3 x 4,5 11, M 5 4,2 x 5,5 13, M 6 5, x 6,6 16, M 8 6,8 x 9, 21, M 1 8,5 x 11, 25, M 12 1,2 x 13,5 3, M 3 3,2 x 6, 9, M 4 4,3 x 8, 11, M 5 5,3 x 1, 13, M 6 6,4 x 11,5 15, M 8 8,4 x 15, 19, M 1 1,5 x 19, 23, M 3 3,4 x 6, 9, M 4 4,5 x 8, 11, M 5 5,5 x 1, 13, M 6 6,6 x 11, 15, M 8 9, x 15, 19, M 1 11, x 18, 23, Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA-steel<9N VA-steel>9N Ti-alloys GG(G) plastics Short step drills - With straight shank - Right-hand cut - Diameter tolerance h8 For thread core holes. For economically producing boreholes and countersinkings in one work step. Solid carbide/tiain-coated Countersink angle Countersink angle 18. For through-holes. for d 1 x d 2 l 2 l 1 shank Ø 1863 thread mm M 3 2,5 x 3,4 8, , 11 M 4 3,3 x 4,5 11, , 12 M 5 4,2 x 5,5 13, , 13 M 6 5, x 6,6 16, , 14 M 8 6,8 x 9, 21, , 15 M 1 8,5 x 11, 25, , 16 M 12 1,2 x 13,5 3, , for d 1 x d 2 l 2 l 1 shank Ø 1864 thread mm M 3 3,4 x 6, , 11 M 4 4,5 x 8, , 12 M 5 5,5 x 1, , 13 M 6 6,6 x 11, , 14 M 8 9, x 15, , 15 M 1 11, x 18, , 16 VHM TiAIN Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA-steel<9N VA-steel>9N Ti-alloys GG(G) plastics Fax order hotline:

3 Countersink (deburrer) - Multi-flute - Right-hand cut - Straight shank (shape A) For deburring, chamfering and countersinking the edges of holes when machining standard-duty materials such as: Steel, cast iron, non-ferrous and light metal , countersink angle , countersink angle 12. d 1 d 2 h9 l 1 d , , , , , , , 17 31, , d 1 d 2 h9 l 1 d , d Drilling Tools Countersink angle, single flute, right-hand cut, straight shank (shape A). -E Countersink range d 1 d 2 l E -E Countersink angle, right-hand cut, straight shank. For burr-free and chatter-free countersinking and deburring holes for nearly all materials. Countersinking and deburring tools 1227 /TiN-coated /TiN Countersink range d 1 d 2 l ,35 6, , , TiN Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics Fax order hotline:

4 Drilling Tools Countersink angle flutes - Right-hand cut - Straight shank (shape C) For burr and chatter-free countersinking and deburring of steel, cast iron and non-ferrous metals. Best results at low cutting speed and high feed rate /TiN-coated. /TiN d 1 d 2 h9 l 1 d , , , 6 5 2, , , , , , , , , , , , , , , 19 TiN d Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics Countersink angle 75-3 flutes - Right-hand cut - Straight shank (shape C) For burr and chatter-free countersinking and deburring of steel, cast iron and non-ferrous metals d 1 d 2 h9 l 1 d , ,5 11 8, , 12 1, , , , 14 16, ,5 15 2, , 16 25, , 17 d 3 Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics Info 335 C and D Countersink angle, with 3 flutes, right-hand cut. For burr and chatter-free countersinking, deburring of steel, cast iron and non-ferrous metals. For countersinking to 74 and 75 page 1, quality grade fine, A for countersunk screws 963 and 965, oval head screws 964 and 966, tapping dies 7513 and 7516, B for countersunk screws Best results at low cutting speed and high feed rate Fax order hotline:

5 Right-hand cut with straight shank. Countersink and deburrer sets For counterboring and deburring Drilling Tools contents quality set contents part 1 ea. Ø 2-5 / 5-1 / 1-15 / 15-2 mm in plastic cassette contents quality set contents part 1 ea. Ø 6,3 / 8,3 / 1,4 / 12,4 / 16,5 / 2,5 mm in plastic cassette 21 -TiCN +TiN contents quality set contents part - 1 ea. Ø 6,3 / 8,3 / 1,4 / TiCN + 12,4 / 16,5 / 2,5 mm TiN in metal cassette contents quality set contents part extra 1 ea. Ø 6,3 / 8,3 / 1,4 / Long shank 12,4 / 16,5 / 2,5 mm in metal cassette contents quality set contents part 1 ea. Ø 6,3 / 8,3 / 1,4 / 1/4 inch 12,4 / 16,5 / 2,5 mm Hexagon shank with adapter, handle, circlip 3126 and magnet, drilling paste in plastic cassette 11 -E contents quality set contents part -E 1 ea. Ø 6,3 / 8,3 / 1,4 / 12,4 / 16,5 / 2,5 mm in metal cassette contents quality set contents part 1 ea. Ø 4,3 / 5, / 6, / 6,3 / 7, / 8, / 8,3 / 1, / 1,4 / 11,5 / 12,4 / 15, / 16,5 / 19, / 2,5 / 23 / 25 mm in metal cassette 11 Z Fax order hotline:

6 Drilling Tools Countersinks for Reversible Cutting Inserts Countersink angle, 3 flutes, straight shank (shape C C). For countersinking to 74 and 75, page 1, quality grade fine E /TiCN + TiN-coated. d For stainless steel. powder steel, ASP ,3-8,3 mm solid carbide, above carbide-tipped. Carbide quality, K E /TiCN+TiN /ASP3 HM/K 2 d 1 d 2 l 1 d 3 d mm 4, ,3-11 5, 4 4 1, , , , ,5 2, , 6 5 1,8-15 7, , , 6 5 2, , , 2, , ,2-19 1, 6 5 2, , ,5 3, , , , ,8 4, , 1 6 3, , ,2 5, , , , ,5 7, , , , ,8 9, , ,2 1, , , TiCN +TiN ASP3 HM K2 -E VA Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics With extended straight shank (shape C), 1 mm long. 3 cutting blades. For countersinking to 74 and 75, page 1, quality grade fine. d 1 d 2 l 1 d , ,5 1 8, , 11 1, , , ,8 13 d d 1 d 2 l 1 d , ,2 14 2, , , ,8 16 Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics Fax order hotline:

7 12271 Countersink angle, 3 flutes, ground, countersink head in compliance with 335 C with 1/4 inch hexagon shank, ground, in compliance with Nominal Ø overall for counter mm length mm sinking 6,3 31 M ,3 31 M ,4 34 M Countersink angle - With 3 flutes - Morse taper shank (shape D).. Countersink and deburrer bits Nominal Ø overall for counter mm length mm sinking 12,4 35 M ,5 4 M ,5 41 M 1 16 Further dimensions available on request d 3 d 1 d 3 l 1 MT , 3, ,5 3, , 3, , 4, , 4, , 4, C 335D d 1 d 3 l 1 MT , 4, , 1, , 14, , 16, , 22, , 3, Drilling Tools Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics With plastic handle, countersink angle, with 3 flutes, right-hand cut. Ø mm 12, , 11 16, Ø mm 2, , ; Countersink angle - Right-hand cut - Straight shank - For mounting 2 carbide reversing tips, each with 3 flutes, clearance angle 8 Scope of supply: - Including clamp screws - Without carbide reversing tips For screw head countersinks (countersinking in compliance with 74 page 1, shape A, fine). Countersinks for Reversible Cutting Inserts Spare Clamping Screws For countersink for reversible cutting inserts cat.-no Carbide reversible cutting inserts 3 cutting blades, clearance angle 8. For countersink for reversible cutting inserts cat.-no PVD coating (P25). d Countersink spare screw reversible carbide tip k d 1 d 2 d 3 H13 Cutting insert Torx Plus mm mm mm size screw KWS-M , W S/M 2,6 x 6,2-8 IP/T KWS-M , W S/M 2,6 x 6,2-8 IP/T KWS-M , W S/M 3,5 x 7,3-1 IP/T KWS-M , W S/M 3,5 x 7,3-1 IP/T Fax order hotline:

8 Drilling Tools Countersinks Counterbores Spot facing cutters 1245 Countersinks (screw head cutters, spot facing cutters) Countersink angle, right-hand cut, right-hand helix. Straight shank and fixed pilot. For countersinking in compliance with 74, page 1. For countersinking of countersunk screws 963 and 965, oval head screws 964 and 966, tapping dies F and G in compliance with 7513, tapping dies D and E in compliance with Fixed pilot: D = through hole. Sunk hole: m = quality grade medium, f = quality grade fine. for countersinking d 1 z9 d 3 e8 l 1 d 2 h Thread accuracy grade M 3 Dm 6,6 3,4 71 5, 29 M 3 Df 6, 3,2 71 5, 211 M 4 Dm 9, 4,5 8 8, 213 M 4 Df 8, 4,3 8 8, 215 M 5 Dm 11, 5,5 8 8, 217 M 5 Df 1, 5,3 8 8, 219 d for countersinking d 1 z9 d 3 e8 l 1 d 2 h Thread accuracy grade M 6 Dm 13, 6,6 1 12,5 221 M 6 Df 11,5 6,4 8 8, 223 M 8 Dm 17,2 9, 1 12,5 225 M 8 Df 15, 8,4 1 12,5 227 M 1 Dm 21,5 11, 1 12,5 229 M 1 Df 19, 1,5 1 12,5 231 Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics Sets of Counterbores 6-part. with 1 ea. countersink for M 3 / M 4 / M 5 / M 6 / M 8 and M 1, in plastic case. Right-hand cut, right-hand helix, straight shank and fixed pilot. For countersinking in compliance with 74, page 2. Counter bores for cheese head screws 84 and Allen screws 912 and KM-6 For core hole DM-6 For through holes, quality grade medium DF-6 For through holes, quality grade fine KM-6 21 DM-6 22 DF Counterbores Similar to 373, right-hand cut, right-hand helix, straight shank and fixed pilot. For countersinking in compliance with 74, page 2. Counter bores for cheese head screws 84 and Allen screws 912 and Fixed pilot: D = through hole, K= core hole Sunk hole: m = quality grade medium, f = quality grade fine. for countersinking d 1 z9 d 3 e8 l 1 d 2 h Thread accuracy grade M 3 Dm 6,5 3,4 71 5, 99 M 3 Df 6,5 3,2 71 5, 1 M 3 Dm 6,a 3,4 71 5, 11 M 3 Df 6, 3,2 71 5, 12 M 3 K 6, 2,5 71 5, 13 M 4 Dm 8, 4,5 71 5, 17 M 4 Df 8, 4,3 71 5, 18 M 4 K 8, 3,3 71 5, 19 M 5 Dm 1, 5,5 8 8, 11 M 5 Df 1, 5,3 8 8, 111 M 5 K 1, 4,2 8 8, 112 M 6 Dm 11, 6,6 8 8, 113 Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics d for countersinking d 1 z9 d 3 e8 l 1 d 2 h Thread accuracy grade M 6 Df 11, 6,4 8 8, 114 M 6 K 11, 5, 8 8, 115 M 8 Dm 15, 9, 1 12,5 116 M 8 Df 15, 8,4 1 12,5 117 M 8 K 15, 6,8 1 12,5 118 M 1 Dm 18, 11, 1 12,5 119 M 1 Df 18, 1,5 1 12,5 12 M 1 K 18, 8,5 1 12,5 121 M 12 Dm 2, 13,5 1 12,5 122 M 12 Df 2, 13, 1 12,5 123 M 12 K 2, 1,2 1 12, Fax order hotline:

9 12421 Counterbores Similar to 373, right-hand cut, right-hand helix, Morse taper shank and fixed pilot. For countersinking in compliance with 74, page 2. Counter bores for cheese head screws 84 and Allen screws 912 and Fixed pilot: D = through hole. Sunk hole: m = quality grade medium, f = quality grade fine. for countersinking d 1 z9 l 1 d3 e8 MT thread accuracy grade mm mm mm M 1 Dm 18, 15 11, 2 11 M 1 Df 18, 15 1, M 12 Dm 2, 15 13, M 12 Df 2, 15 13, 2 15 M 14 Dm 24, 16 15, M 14 Df 24, 16 15, 2 18 d for countersinking d 1 z9 l 1 d3 e8 MT thread accuracy grade mm mm mm M 16 Dm 26, 19 17, M 16 Df 26, 19 17, M 18 Dm 3, 19 2, M 18 Df 3, 19 19, M 2 Df 33, 19 21, Drilling Tools Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics Spot facing cutters P 3-flute, with short-taper fastening for mounting in holder cat.-no , for interchangeable fixed pilots cat.-nr , type A. For machinery steel, soft grey cast iron, mediumhard non-ferrous metals etc HM-soldered (K1 - K35) The interchangeable fixed pilots make it possible for the spot facing cutters to be individually assembled. They can therefore be used for countersinking in compliance with 74 and old 75. Carbide quality d 1 size d 2 for holder mm mm size 5, A 1,7 H 23 6, A 1 2, H 27 6,5 A 1 2, H 21 7, A 2 2,5 H 212 7,4 A 2 2,5 H 213 7,5 A 2 2,5 H 214 8, A 2 2,5 H 215 8,5 A 2 2,5 H 218 9, A 1 3, H, HB ,5 A 1 3, H, HB , A 1 3, H, HB ,4 A 1 3, H, HB ,5 A 1 3, H, HB , A 1 3, H, HB ,5 A 1 3, H, HB , A 1 3, H, HB ,5 A 1 3, H, HB , A 1 3, H, HB , A 1 3, H, HB , A 2 4, H, HB ,5 A 2 4, H, HB , A 2 4, H, HB ,5 A 2 4, H, HB , A 3 5, H, HB ,5 A 3 5, H, HB 3 24 HM K1/K35 Carbide quality d 1 size d 2 for holder mm mm size 19, A 3 5, H, HB , A 3 5, H, HB ,5 A 3 5, H, HB , A 3 5, H, HB , A 3 5, H, HB ,5 A 3 5, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 4 6, H, HB , A 5 8, H, HB , A 5 8, H, HB , A 5 8, H, HB , A 5 8, H, HB , A 5 8, H, HB , A 5 8, H, HB , A 5 8, H, HB , A 5 8, H, HB Al<1%Si Al>1%Si Cu St<52N St<75N St<9N St<11N St<12N St<14N <45HRC <55HRC <6HRC <67HRC VA<9N VA>9N Ti GG(G) plastics Fax order hotline:

10 Fixed pilots Normal holder Hand reamers Fixed Pilots Drilling Tools P Slides along longitudinal and mounted to allow slight rotation One-part, assembly with nut and washer (size, 1 and 2 non-rotatable, mounted in countersink with lateral screw) Exchangeable within the same countersink size. Therefore a large number of combinations is possible Insert protection washer between the blade and the pilot only when using carbide countersinks Two-part, guide bushings with locking screw, assembly with nut and washer One-part d 1 for countersink d mm size mm 2, A 1,7 31 2,4 A 1 2, 35 2,5 A 1 2, 38 3, A 1, , A 1 2, 32 3, A 2 2, ,2 A 1 2, 322 3,2 A 1 3, 324 3,4 A 1 2, 325 4, A 2 2, , A 2 4, 336 4,2 A 2 4, 339 Two-part d 1 for countersink d mm size mm 11, A 3 5, , A 3 5, , A 3 5, , A 3 5, , A 4 6, 379 One-part d 1 for countersink d mm size mm 4,5 A 2 4, 34 4,5 A 1 3, 342 5, A 2 2, , A 1 3, 344 5,3 A 1 3, 346 5,5 A 1 3, 349 6, A 1 3, 351 6,2 A 1 3, 38 6,4 A 1 3, 353 6,5 A 1 3, 355 6,6 A 1 3, 357 6,8 A 1 3, 358 Two-part d 1 for countersink d mm size mm 16, A 4 6, 38 17, A 4 6, , A 4 6, , A 4 6, 383 2, A 4 6, 385 One-part d 1 for countersink d mm size mm 7, A 1 3, 36 8, A 1 3, 381 8,5 A 1 3, 382 8,5 A 3 5, 365 9, A 3 5, 366 1, A 3 5, 368 1,5 A 3 5, 369 1,5 A 4 6, 37 11, A 4 6, , A 4 6, , A 4 6, 376 Two-part d 1 for countersink d mm size mm 2, A 5 8, , A 5 8, , A 4 6, , A 5 8, 39 25, A 5 8, Normal holder P Made of case-hardened steel and polished, short model (can also be used as a grinding pencil holder). For mounting spot facing cutters cat.-no and With straight shank With Morse taper shank Drift key For cat.-no and Straight Size l 1 l 2 d 1 d 2 shank 1254 H , 6 str. 11 H str. 12 H , 1 str. 13 H , 12 str. 14 H , 14 str. 15 H , 16 str. 16 MK Drift key Size l 1 l 2 d 1 shank mm mm mm H ,5 MK H , MK H , MK H , MK H , MK Fax order hotline:

11 Countersink Milling Cutters Angled Cutters Milling Indexable Inserts Adjustable Straight shank with driving face in compliance with 1835 B - With an interchangeable box for for each of the indexable inserts TCMT16T3 and SCMT Countersink Milling Cutters Scope of supply: Countersink milling cutter with clamping screw and key, without indexable inserts. For chamfering, deburring, and countersinking. Stable, quiet operation B Milling Tools TCMT TCMT SCMT SCMT D min Ø D max Ø D min Ø D max Ø Y D h6 L mm mm Countersink angles 3, 45, 6, straight shank in compliance with 1835 B, right-hand cut. Without indexable inserts. Angled cutters 3 / 45 / 6 For countersinking for screw heads and deburring of bores and slotted holes. Indexable inserts see cat. no K Ø D2 Ø D1 Ø d h6 H Z L Indexable mm inserts 3 32, 6, TCMT 16T , 1, TCMT , 6, TCMT ,5 1, TCMT 16T , 5, TCMT , 15, TCMT , 2, TCMT 16T B Spare parts Clamping screws k Wrench For indexable inserts Clamping screw L TORX size size mm IP TCMT 112 M 2,5 x,45 6, TCMT 16T3 M 4, x, Three-edge - Positive 7 - With sintered-in chip deflection step Indexable milling inserts TCMT d 6 rε d l s PM Carbide type H 42 Coating TiN ISO l d d 1 s r designation a TCMT , 6,35 2,8 2,38,2 1 pcs. 11 TCMT 16T34 16,5 9,52 4,4 3,97,4 1 pcs Fax order hotline:

12 17529 Angled cutters 45 with Weldon shank. For chamfer milling starting at Ø 4 mm. Indexable inserts see cat. no ff. Angled cutters B (Z2+3) 45 ØD2 ØD1 L H Ød h6 Z Indexable inserts mm mm 1, SCMT , SCMT , SCMT 9T , SCMT 9T , SCMT 9T ,7 12 L SCMT 9T ,8 16 L SCMT 9T ,3 3 L SCMT 9T3 18 Milling Tools Spare parts Clamping screws k Wrench For indexable inserts Clamping L TORX size size screw mm IP SCMT 62 M 2,5 x,45 6, SCMT 9T3 M 4, x, Indexable insert holder - Point angle 45 - With coolant bore - Without indexable inserts For NC spot drilling, milling, V-groove milling, engraving. Milling cutter for bevelling and centring 1835 B d1 h6 L L1 y Z D min. D max mm Indexable Inserts and Spare Parts PMK Carbide type H 42 Coating TiN ISO designation a TCMX 16T3 ZR 1 pcs. 11 Clamping screw k Screwdriver size TORX size T M 4 x Fax order hotline:

Solid carbide Twist Drills Overview

Solid carbide Twist Drills Overview Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ

More information

Performance requires quality.

Performance requires quality. 131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

More information

Info Overview - solid carbide twist drills (I) Drilling Tools

Info Overview - solid carbide twist drills (I) Drilling Tools Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number

More information

Drilling Tools. Drilling Tools

Drilling Tools. Drilling Tools Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide

More information

Cutting

Cutting wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist

More information

TAPER AND DEBURRING COUNTERSINKERS

TAPER AND DEBURRING COUNTERSINKERS TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because

More information

Tooth shapes (DIN 1840) of circular metal saw blades. Tooth shape BW hypoid-toothed, bevelled on side-bevelled

Tooth shapes (DIN 1840) of circular metal saw blades. Tooth shape BW hypoid-toothed, bevelled on side-bevelled Info Info 172-1751 Tooth shapes ( 184) of circular metal saw blades Tooth shape A fine tooth pitch Tooth shape B hypoid-toothed Tooth shape BW hypoid-toothed, bevelled on side-bevelled Tooth shape C High

More information

Milling Tools Milling Tools

Milling Tools Milling Tools HSS-keyway milling cutters -finishing cutters -roughing cutters -radius milling cutters Solid carbide -universal end milling cutters - end milling cutters RockTec 52 and 65 - ALU end milling cutters -

More information

Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6

Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6 tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert

More information

Carbide Drills When productivity matters - Stub 1. to Long 1

Carbide Drills When productivity matters - Stub 1. to Long 1 CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page... group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet

More information

GFS - Backspotfacing System RSQ for small-lot production

GFS - Backspotfacing System RSQ for small-lot production GFS - for small-lot production The GFS back spotfacing system, type RSQ, is a heavy-duty, simple tool with rapid payback and extremely inexpensive owing to the interchangeability of the proven GFS cutters

More information

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs

More information

Threading tools to JIS standard

Threading tools to JIS standard Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating

More information

1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel

1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel 1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking

More information

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT 128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28

More information

Special Product Catalogue. T-A Drill Insert System

Special Product Catalogue. T-A Drill Insert System Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket

More information

"IMCO" SOLID CARBIDE CUTTING TOOLS - USA

IMCO SOLID CARBIDE CUTTING TOOLS - USA "IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC

More information

Clamping Tools

Clamping Tools Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves

More information

BELL, SCOTT & CO. LTD.

BELL, SCOTT & CO. LTD. Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information

SC series(twist drill) for machining of cast iron, Al alloy

SC series(twist drill) for machining of cast iron, Al alloy C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200

More information

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES 4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional

More information

Special Product Catalogue. T-A Drill Insert System

Special Product Catalogue. T-A Drill Insert System Special Product Catalogue T-A Drill Insert System T-A Special Products Introduction Allied Maxcut - where special is the norm Tell us your application and we ll make the tool - guaranteed. With more than

More information

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:

More information

Drills Manufactured to National Aerospace Standards (NAS)

Drills Manufactured to National Aerospace Standards (NAS) Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life

More information

DRILL INSERTS & HOLDERS

DRILL INSERTS & HOLDERS DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts

More information

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by

More information

MFH-RAPT R High Feed Milling Cutter

MFH-RAPT R High Feed Milling Cutter MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase

More information

220º Ball Nosed Lollipop Cutter

220º Ball Nosed Lollipop Cutter 220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia

More information

CMT Vertical Mill-Thread

CMT Vertical Mill-Thread CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground

More information

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid

More information

Standard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.

Standard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade. Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as

More information

Pneumatic spindles Pneumatic built-in motors

Pneumatic spindles Pneumatic built-in motors Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial

More information

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting

More information

COMPETENCE IN PRECISION AND QUALITY HOLE SAWS

COMPETENCE IN PRECISION AND QUALITY HOLE SAWS COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard

More information

Carbide Burrs and Steel Brushes

Carbide Burrs and Steel Brushes Carbide Burrs Tungsten Carbide Burrs 288 Steel 305 287 Carbide Burrs Tungsten Carbide Burrs Flexovit tungsten carbide burrs are manufactured on state of the art CNC machines to give high consistency and

More information

TWIST DRILLS AND COUNTERBORES

TWIST DRILLS AND COUNTERBORES TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting

More information

Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation

Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11

More information

hole saws 260 PRECISION TOOLS

hole saws 260 PRECISION TOOLS HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,

More information

Applicable for steel, stainless steel and cast iron Suitable for dry cutting

Applicable for steel, stainless steel and cast iron Suitable for dry cutting Best of 2009 E62-6/2009-GBP Valid to 21st DEC 2009 80 0 The new Black Panther - insert has arrived! Applicable for steel, stainless steel and cast iron Suitable for dry cutting The latest generation of

More information

SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.

SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades. SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...

More information

HTR Precisions Cutting Tools is proud to offer you the complete range of cutting tools of superior quality according to international standards.

HTR Precisions Cutting Tools is proud to offer you the complete range of cutting tools of superior quality according to international standards. 2015 2016 Introduction HTR Precision Cutting Tools is a wholly owned black empowered company incorporated for the purpose of manufacturing and supplying precision cutting tools, in response to the growing

More information

CTR Counterboring Tools

CTR Counterboring Tools CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land

More information

Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches

Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches 8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud

More information

Taper shank arbors for drill chucks

Taper shank arbors for drill chucks KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole

More information

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy

Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable

More information

NHD - Improved Solid Carbide Drill

NHD - Improved Solid Carbide Drill February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills

More information

Extremely small dimensions, extremely high precision.

Extremely small dimensions, extremely high precision. Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance

More information

Carbide Cutting Tool Specials

Carbide Cutting Tool Specials Valid until 19/12/2011 All prices are exclusive of VAT. Carriage may be extra Carbide Cutting Tool Specials 2011 Part off Blocks, Blades & Inserts interchangeable with GTN LGIH-Line LGIH 26-3S Blades new

More information

POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.

POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form. MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING

More information

Drills Jobber, R40 UNI

Drills Jobber, R40 UNI Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87

More information

Solid Carbide Thread Milling

Solid Carbide Thread Milling Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric

More information

AQUA DRILL EX FLAT SERIES

AQUA DRILL EX FLAT SERIES AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,

More information

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) ** System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole

More information

CUTTING TOOLS 5/64 27/64 3/32 7/16 7/64 29/64 1/8 15/32 9/64 31/64 5/32 1/2 11/64 3/16 3/16 13/64 13/64 7/32 7/32 15/64 15/64 1/4 1/4 17/64 17/64 9/32

CUTTING TOOLS 5/64 27/64 3/32 7/16 7/64 29/64 1/8 15/32 9/64 31/64 5/32 1/2 11/64 3/16 3/16 13/64 13/64 7/32 7/32 15/64 15/64 1/4 1/4 17/64 17/64 9/32 JOBBER LENGTH NITRO DRILL BITS 135 SPLIT POINT MADE IN USA 10601 1/16 10623 13/32 10602 5/64 10624 27/64 10603 3/32 10625 10604 7/64 10626 29/64 10605 1/8 10627 15/32 10606 9/64 10628 31/64 10607 5/32

More information

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06

More information

Reaming and Fine Boring

Reaming and Fine Boring Reaming and Fine Boring MAPAL Competence Reaming and Fine Boring Tool with guide pads Fixed reamers Competence Reaming and Fine Boring Today reaming and fine boring are the most widely used methods for

More information

Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads

Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market

More information

HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE

HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE Coolant System Hydraulic Feeding Quick Clamping Vise Saw Size 14 Cutting Cap. 7 Saw Size 18 Cutting Cap. 10 Blade 10 KW1500415 CIRCULAR

More information

Drills Jobber, DXJ D D D D

Drills Jobber, DXJ D D D D Drills Jobber, DXJ 0840 8.4 117 75 0840 0840 0850 8.5 117 75 0850 0850 0860 8.6 81 0860 0860 00 8.7 81 00 00 03 8.73 11/32 81 03 03 0880 8.8 81 81 0880 0880 0890 8.9 8.9 81 81 0890 0890 9.0 9.0 81 81 0910

More information

YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE

YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr

More information

ALU-XP E T. The Alu-XP range: Exceptional performance and reliability.

ALU-XP E T. The Alu-XP range: Exceptional performance and reliability. The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data

More information

Special drills 88 PRECISION TOOLS

Special drills 88 PRECISION TOOLS SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet

More information

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12. Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with

More information

MHS TOOLS NEWS B137G. Drills for die & mould machining

MHS TOOLS NEWS B137G. Drills for die & mould machining TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need

More information

DRILLS CARBIDE. Drills Carbide When productivity matters - 3xd 1

DRILLS CARBIDE. Drills Carbide When productivity matters - 3xd 1 Drills Carbide When productivity matters - 3xd 1 to 12xd 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings DRILL CARBIDE Drills

More information

tough. Live Centers Face Drivers 2013/2014

tough. Live Centers Face Drivers 2013/2014 tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers

More information

Mill - Thread Inserts and Kits

Mill - Thread Inserts and Kits Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand

More information

Body Length (mm) New Tool Ref Length (mm)

Body Length (mm) New Tool Ref Length (mm) 3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *

More information

Solid Carbide Thread Milling

Solid Carbide Thread Milling Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page

More information

List No STANDARD All sizes 1 each

List No STANDARD All sizes 1 each Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.

More information

Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS

Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating

More information

PRODUCT CATALOG MAIN INDEX

PRODUCT CATALOG MAIN INDEX PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre

More information

P&N/SUTTON. A trusted name, serving Canadian industries since

P&N/SUTTON. A trusted name, serving Canadian industries since /SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)

More information

KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling

KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip

More information

S-TAW. Changeable Carbide Insert Type Drill

S-TAW. Changeable Carbide Insert Type Drill News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54

More information

5/6 and 7/8 Series T-A Holders

5/6 and 7/8 Series T-A Holders 5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296

More information

Multi-Lock Milling Chuck

Multi-Lock Milling Chuck Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting

More information

Your guide to the right drill bit

Your guide to the right drill bit Drilling 44 Drilling Overview Bosch Accessories 11/12 Your guide to the right drill bit These information pages are designed to help the user. They describe the correct use of the appropriate power tool

More information

Specializing In High Performance Solid Carbide Cutting Tools

Specializing In High Performance Solid Carbide Cutting Tools Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for

More information

Electric Power Tools Created :05 Revised :08 Page 1

Electric Power Tools Created :05 Revised :08 Page 1 2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric

More information

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units. For toolmaking, fixture manufacturing and machine engineering Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

More information

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling Tooling News No.E435 The Ultimate in Low Cost ing SEC-s MB Utilizing DEX Coat, a dedicated coating developed for drills, to achieve more than double the tool life of conventional drills Head Different

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN

More information

Good reasons to use Albrecht drill chucks

Good reasons to use Albrecht drill chucks 3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened

More information

Milling. Widia s New M1200 Face Mill Program. Introducing... NEW!

Milling. Widia s New M1200 Face Mill Program. Introducing... NEW! Milling Introducing... Widia s New M1200 Face Mill Program NEW! specifically engineered to deliver consistent performance in demanding face-milling applications! Use less horsepower and gain up to 30%

More information

H T STD STD STD

H T STD STD STD Ejector Pins Nitrided - Shoulder Inch Material AISI: H13 1.2344 D S Cat. No. 6 10 14 H T STD. +.005 STD. +.005 STD. +.005 1/32 1/2 EP03 06-1/2 065-1/2 2 EP03 06-2 10-2 105-2 1/4 1/8 1/2 EP04 06-1/2 10-1/2

More information

No. of Holes. Drill Dia. (in.)

No. of Holes. Drill Dia. (in.) UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast

More information

HOLLFELDER CUTTING TOOLS. Special tooling for customer applications

HOLLFELDER CUTTING TOOLS. Special tooling for customer applications HOLLFELDER CUTTING TOOLS Special tooling for customer applications HOLLFELDER-GÜHRING CUTTING TOOLS Your competent partner in the area of metal chip removal. At our two company locations in Nuremberg und

More information

Radial Drilling And Milling Heads TYPE HAAS

Radial Drilling And Milling Heads TYPE HAAS Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106

More information

Cutting-Off and Grooving Tools. Basic Tool holders for Recessing Blades. Cut-Off and Deep Recessing Blades

Cutting-Off and Grooving Tools. Basic Tool holders for Recessing Blades. Cut-Off and Deep Recessing Blades Cutting-O and Grooving Tools 1867 Recessing blade not included. For clockwise and counterclockwise operation. Basic Tool holders or Recessing Blades 1867 Size B is equal to construction height o the grooving

More information

MOLD GRINDING POLISHING

MOLD GRINDING POLISHING G At M.A.Ford, we pride ourselves on being one of the world s premier manufacturers of high performance cutting tools. That s as true today as it was back in 1919 when Matthew A. Ford produced the first

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

Mite Mfg Co.098 Diesel X SIZE R0.217" " deep R0.111" Drill #21. Tap Drill #50. 1/4" deep on " PCD Tap 2-56 (3 places) R0.

Mite Mfg Co.098 Diesel X SIZE R0.217  deep R0.111 Drill #21. Tap Drill #50. 1/4 deep on  PCD Tap 2-56 (3 places) R0. 0.100" 0.074" 0.766" Ø0.398" Ø0.188" 25 Ø0.312" Ø0.125" 0.552" Ø0.250" (ream) 0.306" 0.166" 0.535" Ø0.775" Ø0.716" Screw cut 32 TPI 0.019 " deep -1 CRANKCASE Magnesium Die Casting with cast-in bronze bush

More information