Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
|
|
|
- Walter Flynn
- 5 years ago
- Views:
Transcription
1 4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2 WELDON PLAIN COATING COATING l1 l1 l2 30 Helix l2 30 Helix in d / d to mm d1 +0,000 / -0,050 d2-0,0025 to -0,0100 d1 d > End designs Wide variety of corner radii available Square end for general machining and finishing Ball nose styles for contouring Center cutting Four flute end mills are versatile, general purpose tools for slotting, profiling and contour milling in applications where chip packing is not a problem. The increased core thickness of 4-flute tools results in less tool deflection and improved size accuracy, while the reduced chip load gives improved surface finishes. designs Precision shanks fit all collets and most shrink-fit systems Many sizes offered with flats for end mill holders Multiple lengths Long, extra long and extreme lengths for deep cavity milling Stub length for extra rigidity Sets B Sets Contains one each of: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 78
2 GENEAL PUPOSE END MILLS Inch sizes eference LL Long LOC, Long OAL L Long LOC, Standard OAL egular LOC, egular OAL S Short LOC, egular OAL XX X-Long LOC, X-Long OAL Inch 1/64 1/8 1/32 1-1/2 Square Plain S /64 1-1/2 Square Plain /16 1-1/2 Square Plain S /16 1-1/2 Ball Plain S /32 1/8 3/32 1-1/2 Square Plain /32 1-1/2 Ball Plain /8 1-1/2 Square Plain L /32 1-1/2 Square Plain S /64 1/8 3/32 1-1/2 Ball Plain S /64 1-1/2 Square Plain /64 1-1/2 Ball Plain /8 1-1/2 Square Plain S /8 1-1/2 Ball Plain S /16 1/8 3/16 1-1/2 Square Plain /16 1-1/2 Ball Plain /4 1-1/2 Square Plain L /64 1/8 1/4 1-1/2 Square Plain /4 1-1/2 Ball Plain /16 1-1/2 Square Plain S /32 1/8 3/16 1-1/2 Ball Plain S /8 1-1/2 Square Plain /8 1-1/2 Ball Plain /64 1/8 3/8 1-1/2 Square Plain /8 1-1/2 Ball Plain /4 1-1/2 Square Plain S /4 1-1/2 Ball Plain S /2 1-1/2 Square Plain /2 1-1/2.015 Plain /2 1-1/2.020 Plain /8 1/8 1/2 1-1/2 Ball Plain /8 2 Square Plain LL /8 2 Ball Plain LL /4 2-1/4 Square Plain LL /4 2-1/4 Ball Plain LL Square Plain XX Ball Plain XX /64 3/16 9/16 2 Square Plain /16 2 Ball Plain /16 2 Square Plain S /32 3/16 5/16 2 Ball Plain S /16 2 Square Plain /16 2 Ball Plain /64 3/16 5/8 2 Square Plain /8 2 Square Plain S /8 2 Ball Plain S /8 2 Square Plain / Plain /16 3/16 5/ Plain / Plain /8 2 Ball Plain /4 2-1/2 Square Plain LL /4 2-1/2 Ball Plain LL adius TiN * Superseded by. Add TiN to any uncoated tool. See page
3 GENEAL PUPOSE END MILLS Inch sizes 1 4 Square Plain LE /16 3/ Ball Plain LE /8 3 Square Plain XX /8 3 Ball Plain XX /64 1/4 5/8 2-1/2 Square Plain /16 2 Square Plain SS /32 1/4 5/8 2-1/2 Square Plain /8 2-1/2 Ball Plain /64 1/4 3/4 2-1/2 Square Plain /2 2 Square Plain SS /2 2 Ball Plain SS /4 2-1/2 Square Plain /4 2-1/2 Square Weldon /4 2-1/2.015 Plain /4 2-1/2.020 Plain /4 2-1/2.030 Plain /4 2-1/2.045 Plain /4 1/4 3/4 2-1/2 Ball Plain Square Plain LX Ball Plain LX /8 3 Square Plain LL /8 3 Ball Plain LL /2 4 Square Plain XX /2 4 Ball Plain XX /2 6 Square Plain XE /2 6 Ball Plain XE /64 5/16 3/4 2-1/2 Square Plain /32 5/16 3/4 2-1/2 Square Plain /4 2-1/2 Ball Plain /64 5/16 13/16 2-1/2 Square Plain /2 2 Square Plain SS /2 2 Ball Plain SS /16 2-1/2 Square Plain /16 2-1/2 Square Weldon /16 2-1/2.015 Plain /16 2-1/2.020 Plain /16 2-1/2.030 Plain /16 5/16 13/16 2-1/2.045 Plain /16 2-1/2 Ball Plain Square Plain LX Ball Plain LX /8 3 Square Plain LL /8 3 Ball Plain LL /8 4 Square Plain XX /8 4 Ball Plain XX /64 3/ /2 Square Plain /32 3/ /2 Square Plain /2 Ball Plain /64 3/ /2 Square Plain adius TiN * Superseded by. Add TiN to any uncoated tool. See page
4 GENEAL PUPOSE END MILLS Inch sizes eference LE Long LOC, Extreme OAL LL Long LOC, Long OAL LX Long LOC, X-Long OAL egular LOC, egular OAL X egular LOC, X-Long OAL SS Short LOC, Short OAL XE X-Long LOC, Extreme OAL XX X-Long LOC, X-Long OAL adius 5/8 2 Square Plain SS /8 2 Ball Plain SS /2 Square Plain /2 Square Weldon /2.015 Plain /2.015 Weldon /2.020 Plain /2.020 Weldon /2.030 Plain /2.030 Weldon /2.045 Plain /2.045 Weldon /2.060 Plain /8 3/ /2.060 Weldon /2.090 Plain /2.090 Weldon /2 Ball Plain Square Plain X Ball Plain X /8 3 Square Plain LL /8 3 Square Weldon LL /8 3 Ball Plain LL /2 6 Square Plain LE /2 6 Ball Plain LE /4 4 Square Plain XX /4 4 Square Weldon XX /4 4 Ball Plain XX /64 7/ /4 Square Plain /32 7/ /4 Square Plain /4 Ball Plain /64 7/ /4 Square Plain /8 2-1/2 Square Plain SS /4 Square Plain /4 Ball Plain /16 7/ Square Plain LL Ball Plain LL Square Plain XX Ball Plain XX /64 1/2 1 3 Square Plain /32 1/2 1 3 Square Plain Ball Plain /64 1/2 1 3 Square Plain /8 2-1/2 Square Plain SS /8 2-1/2 Ball Plain SS Square Plain Square Weldon /2 1/ Plain Weldon Plain Weldon Plain Weldon TiN * Superseded by. Add TiN to any uncoated tool. See page 162.
5 GENEAL PUPOSE END MILLS Inch sizes 1/2 1/2 9/16 9/16 5/8 5/8 11/16 3/4 3/4 3/4 adius Plain Weldon Plain Weldon Plain Weldon Plain Weldon Ball Plain Square Plain L Ball Plain L /2 6 Square Plain LX /2 6 Ball Plain LX Square Plain LL Square Weldon LL Ball Plain LL Square Plain XX Square Weldon XX Ball Plain XX Square Weldon EX /4 3-1/2 Square Plain /4 3-1/2 Square Weldon /4 3-1/2 Ball Plain /4 3 Square Plain SS /4 3-1/2 Square Plain /4 3-1/2 Square Weldon /4 3-1/2.030 Plain /4 3-1/2.030 Weldon /4 3-1/2.060 Plain /4 3-1/2.060 Weldon /4 3-1/2.090 Plain /4 3-1/2.090 Weldon /4 3-1/2 Ball Plain Square Plain LX Ball Plain LX /4 5 Square Plain LL /4 5 Square Weldon LL /4 5 Ball Plain LL Square Plain XX Square Weldon XX Ball Plain XX Square Weldon EX /2 4 Square Plain /2 4 Ball Plain Square Plain SS /2 4 Square Plain /2 4 Square Weldon / Plain / Weldon / Plain / Weldon TiN * Superseded by. Add TiN to any uncoated tool. See page
6 GENEAL PUPOSE END MILLS Inch sizes eference EE Extreme LOC, Extreme OAL EX Extreme LOC, X-Long OAL LL Long LOC, Long OAL LX Long LOC, X-Long OAL L egular LOC, Long OAL egular LOC, egular OAL SS Short LOC, Short OAL XX X-Long LOC, X-Long OAL adius 1-1/ Plain / Weldon / Plain / Weldon / Plain / Weldon / Plain / Weldon / Plain / Weldon /4 3/4 1-1/ Plain / Weldon /2 4 Ball Plain Square Plain LX Ball Plain LX /4 5 Square Plain LL /4 5 Square Weldon LL /4 5 Ball Plain LL Square Plain XX Square Weldon XX Ball Plain XX /2 Square Weldon EX /16 7/8 1-1/2 4 Square Plain /2 4 Square Plain /8 7/8 1-1/2 4 Square Weldon /2 4 Ball Plain / /2 4 Square Plain /2 4 Square Plain /2 4 Square Weldon / Plain / Weldon / Plain / Weldon / Plain / Weldon / Plain / Weldon / Plain / Weldon / Plain / Weldon /2 4 Ball Plain /4 5 Square Plain LL /4 5 Square Weldon LL /4 5 Ball Plain LL Square Plain XX Square Weldon XX Ball Plain XX /8 7 Square Weldon EE / /2 Square Weldon /4 1-1/ /2 Square Plain TiN * Superseded by. Add TiN to any uncoated tool. See page
7 GENEAL PUPOSE END MILLS Metric sizes Metric 1 3 1, , , , adius 2 38 Square Plain S Ball Plain S Square Plain Ball Plain Square Plain S Ball Plain S ,5 38 Square Plain ,5 38 Ball Plain Square Plain Ball Plain Square Plain S Ball Plain S ,3 38 Square Plain ,3 38 Ball Plain Square Plain Ball Plain Square Plain S Ball Plain S ,5 38 Square Plain ,5 38 Ball Plain Square Plain S Ball Plain S Square Plain Square Plain ,3 Plain Ball Plain Square Plain LL Ball Plain LL Square Plain XX Ball Plain XX Square Plain S Square Plain Ball Plain Square Plain S Ball Plain S Square Plain ,4 Plain Square Plain Ball Plain Square Plain LL Ball Plain LL Square Plain XX Ball Plain XX Square Plain Ball Plain Square Plain S Ball Plain S Square Plain ,5 Plain
8 GENEAL PUPOSE END MILLS Metric sizes eference LL Long LOC, Long OAL egular LOC, egular OAL X egular LOC, X-Long OAL S Short LOC, egular OAL SS Short LOC, Short OAL XX X-Long LOC, X-Long OAL Square Plain Ball Plain Square Plain LL Ball Plain LL Square Plain XX Ball Plain XX Square Plain SS Ball Plain SS Square Plain ,3 Plain ,5 Plain Square Plain Ball Plain Square Plain LL Ball Plain LL Square Plain XX Ball Plain XX Square Plain Square Plain Ball Plain Square Plain SS Ball Plain SS Square Plain ,5 Plain ,0 Plain ,5 Plain Square Plain Ball Plain Square Plain LL Ball Plain LL Square Plain XX Ball Plain XX Square Plain Square Plain Ball Plain Square Plain SS Ball Plain SS Square Plain ,5 Plain ,0 Plain ,5 Plain Square Plain Ball Plain Square Plain X Ball Plain X Square Plain LL Ball Plain LL Square Plain XX Ball Plain XX Square Plain adius 85
9 GENEAL PUPOSE END MILLS Metric sizes adius Square Plain SS Square Plain Ball Plain Square Plain ,5 Plain ,0 Plain ,5 Plain Ball Plain Square Plain LL Ball Plain LL Square Plain XX Ball Plain XX Square Plain Square Plain Ball Plain Square Plain LL Square Plain XX Square Plain SS Square Plain Ball Plain Square Plain ,5 Plain ,0 Plain ,5 Plain ,0 Plain Square Plain LL Ball Plain LL Square Plain XX Square Plain Square Plain Ball Plain Square Plain LL Square Plain XX Square Plain Square Plain ,5 Plain ,0 Plain ,5 Plain ,0 Plain Ball Plain Square Plain LL Ball Plain LL Square Plain XX Square Plain Square Plain SS Square Plain Ball Plain Square Plain LL Square Plain XX eference LL Long LOC, Long OAL egular LOC, egular OAL SS Short LOC, Short OAL XX X-Long LOC, X-Long OAL 86
10 GENEAL PUPOSE 4-FLUTE END MILLS Work Type of Axial adial Speed (SFM) Feed (Inches per Tooth) Speed (m/min) Feed (mm per Tooth) Material Cut DOC DOC 1/8 1/4 3/8 1/2 5/8 3/4 1 3,0 6,0 9,0 12,0 16,0 19,0 25,0 Slot.5 x D 1 x D Composites, Plastics Graphite Cast Iron - Gray Cast Iron - Ductile Low Carbon Steel 38 Hc 1018, 12L14, 8620 Medium Carbon Steels 38 Hc 4140, 4340 Tool & Die Steels 38 Hc A2, D2, H13, P20 Tool & Die Steels Hc A2, D2, H13, P20 Easy to Machine Stainless Steel 416, 410, 302, 303 Moderate Machining Stainless Steels 304, 316, Invar, Kovar ough 1 x D.5 x D Finish 1.5 x D.01 x D Slot.5 x D 1 x D ough 1 x D.5 x D Finish 1.5 x D.01 x D Slot.5 x D 1 x D ough 1 x D.5 x D Finish 1.5 x D.01 x D Slot.5 x D 1 x D ough 1 x D.5 x D Finish 1.5 x D.01 x D Slot.5 x D 1 x D ough 1 x D.5 x D Finish 1.5 x D.01 x D Slot.5 x D 1 x D ough 1 x D.5 x D Finish 1.5 x D.01 x D Slot.5 x D 1 x D ough 1 x D.5 x D Finish 1.5 x D.01 x D Slot.25 x D 1 x D ough 1 x D.25 x D Finish 1.5 x D.01 x D Slot.5 x D 1 x D ough 1 x D.5 x D Finish 1.5 x D.01 x D Slot.5 x D 1 x D ough 1 x D.5 x D Finish 1.5 x D.01 x D D = tool diameter educe feed rates by 20% when using long length tools Starting parameters shown 87
Variable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
PYSTL STAINLESS STEELS TITANIUM PH STEELS. 438 Series. 538 Series. 738 Series. Introduces The NEW. series VARIABLE IND EX PERFORMANCE EDGE
Introduces The NEW PYSTL series 438 Series STAINLESS STEELS 538 Series TITANIUM PH STEELS VARIABLE IND EX PERFORMANCE EDGE 738 Series TREATMENT PREMIUM GRADE CARBIDE COMPLETE RADIU S OFFERING PYSTL 438
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
On Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
2007 Product Catalog
2007 Product Catalog Get your money s worth and more. Power. Precision. Performance. Everything you need to make your operation more efficient, more productive and more profitable. It s all there, in every
Specializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
M.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
Tools for Aluminum. New Expanded Offering. ISO 9001 Certified
Tools for Aluminum New Expanded Offering www.kyocera-sgstool.com ISO 9001 Certified S-CAB HIGH PEFOMANCE END MILLS The original, symmetrical flute design features an engineered flute form that provides
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
Rotary Cutting Tools. Metric. ISO 9001:2008 CERTIFIED. Cutting Edge Technology Made in the U.S.A.
Rotary Cutting Tools Metric ISO 900:2008 CERTIFIED Cutting Edge Technology Made in the U.S.A. Table of Contents Category Page # Terms & Conditions 3 Coatings 3 Endmills: 4 32 Endmill Data 4 5 Endmills
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
COATING SELECTION CHART
On the Cutting Edge... at Whitney Tool! Whitney Tool is recognized as a leading manufacturer of Woodruff style slotting and keyseat milling cutters, as well as Counterbores, Counterbore pilots, T-Slot,
MFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
Rotary Cutting Tools Metric. ISO 9001:2008 CERTIFIED. Cutting Edge Technology Made in the U.S.A.
Rotary Cutting Tools 200 Metric ISO 900:2008 CERTIFIED Cutting Edge Technology Made in the U.S.A. TABLE OF CONTENTS CATEGORY PAGE # Endmill Data 2 Terms & Conditions 3 Materials Index 3 Milling Procedures
Solid End Milling High-Performance Solid Carbide End Mills
Solid End Milling High-Performance Tool Selector and Grades...P2 P11 High-Performance Capability End Mills...P12 P86 High-Performance Solid Carbide Roughing End Mills...P88 P104 High-Performance Solid
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting
S-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
CERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
Extremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
SMART DAMPER. Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended Reach Milling A PRODUCT OF:
NEW! Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended each Milling A PODUCT OF: OVEVIEW Quick and excellent damping effect tool holder. esults From Vibration With ong
Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
No. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
M.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
SC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
MASTER CATALOG SOLID END MILL PORTFOLIO.
MASTER CATALOG SOLID END MILL PORTFOLIO Beyond Solid End Mills High-performance milling in a new dimension. Tool Selection Guide................................................................M2 M5 Grades
Newest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform!
Newest Addition The Tuffness Of The 205 Series Hi-Tuff Drill On A Micro Drill Platform! Micro -Tuff Micro Drill Micro Drills NEW Addition Micro -Tuff 305 Series Micro Drill Web-Thinned Point 4-Facet Point
MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING
ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING 2017.09 MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM is a new multifunctional high-performance cutter that
BELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
P: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
SIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
High Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
High-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
Technical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
TOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
List No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
EFFICIENT OPTIMIZED ROUGHING NIAGARA CUTTER MULTI FLUTE SOLID CARBIDE END MILLS
FFICINT OPTIMIZD ROUGHING NIAGARA CUTTR MULTI FLUT SOLID CARBID ND MILLS UNSURPASSD CHIP CONTROL A NW LVL OF PRFORMANC The Niagara Cutter Multi Flute family of products is taking Optimized Roughing to
Drills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
CTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
UPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
TR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
2017 NORTH AMERICA TAPS EDITION
2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,
AQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
Cera-Notch Grooving and Threading System
Cera-Notch Grooving and Threading System Grooving Threading Face Grooving FC Program Inside Deep Grooving Grooving with Cermets Characteristics: Offer better surface finishes on carbon and alloy steel
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
TOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
High-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
MHS. Drills for die & mold machining B137A
2013.4 Update B137A Small diameters now included Solid Carbide Drill for Die & Mold Machining WSTAR drill series Drills for die & mold machining Innovative drilling in hardened steel by eliminating the
Features. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools Turning, Facing & Grooving System KOOL Cut Modular Turning, Facing & Grooving System-Technology KOOL Cut Graphic Index ---------------------------------------------------------------------------------------------------------------------------------
ISSUE. No. 23 February - May CoroDrill 460 -XM. Grooving Kits. Efficient and Economical Steel Milling. MaxThread Thread Mills.
Featured Inside Grooving Kits EVERY PRODUCT, EVERYBRAND, ISSUE No. 23 February May 2013 Efficient and Economical Steel Milling ONE SUPPLIER! Page 36 MaxThread Thread Mills With a Special Guarantee Card
INDUSTRIAL ROUTING CUTTING TOOLS
CUTTING TOOLS Technical Information UpCut, DownCut, Compression. What are the pros and cons of each of these chip flow styles? Below highlights some of the key considerations that should be taken into
Special Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
Customer Focused & Technology Driven
Micro Tools Customer Focused & Technology Driven With a base of solid experience, the latest in technological advancements and a focus on the needs of the customer, NAP Gladu surpasses its goal of providing
Burrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
SAMURAI Series. 51 Models. 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball. Ø1 - Ø12mm. Vol
SAMURAI Series Vol. 2-2011 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball 51 Models Ø1 - Ø12mm SAMURAI GS - 4 Flutes Square ( Ø 1 Ø 10 ) d2 d1 l2 l1 Suitable for the machining of : Carbon Stainless
Side Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A.
TOOL NEWS 2017. Update B242A Milling Side Cutter Series New Product Side Cutter with Low Cutting Resistance Vertical mount double-sided insert for VAS and VOS. VAS0 VAS500 VOS0 ASX0 1 Unique side cutter
Carbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
TWIST DRILLS AND COUNTERBORES
TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 2 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 4 Standard Taps--High Speed Steel Machine Screw
MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY
AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY BURS Table of contents Burs Series Number Page Number Cylindrical with no end cut... SA... 05 Cylindrical with end cut... SB... 05 Cylindrical
SERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling
DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
Series Features: Diameters:.312,.375,.500,.625,.750, 1.000, 1.250, 1.500
New design indexable threadmilling inserts and tool holders allow for a profitable and effective way to produce external and internal applications quickly while generating superior surface finish. Diameters:.312,.375,.500,.625,.750,
SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
Compatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
Special drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
MHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
DEEP GROOVING. insert height A 6.35 B 8.43 chipbreaker. corner radius Metric Description EDP Code W R L H A
Deep Grooving Insert Nomenclature hart VDG 318 M 20 vee-bottom deep grooving insert height 6.35 8.43 chipbreaker groove width Metric 3,18 3,96 4,78 5,54 6,35 7,92 9,53 metric corner radius Metric 0.20
Aluminum Machining End mill
1/9 Aluminum Machining /9 TaeguTec has launched its new AUMI that delivers improved performance over its predecessor, the AES type end mill, when machining aluminum. The new AUMI has a remarkably strong
DRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
Solid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
End Mills with Coolant Through using 15 Positive Inserts for Profiling & Contouring. Remember to use COPASLIP anti-seize compound on all insert screws
End Mills with Coolant Through using 15 Positive Inserts for Profiling & Contouring Designation d³ d¹ d² l¹ l² tmax -0500-36.500.185.625 3.65 1.74 1.64 10 1-0500-44.500.185.625 4.40 2.49 2.39 10 1-0500-51.500.185.625
Victory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
Drilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
Energy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
New Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
COOLANT-FED TOOLING & SYSTEMS
V-FLNGE ER OLLET HUK SINGLE PIN FE SEL ROTRY GLND SSEMLY PRT NUMER RNGE OLLET SERIES DIMETER PROJ. D TR TO TR GLND (INLUDED) MINIMUM PRESSURE (1) MXIMUM PRESSURE (2) MXIMUM SPEED (RPM) (3) REPLEMENT SEL