Aluminum Machining End mill

Transcription

1 1/9 Aluminum Machining

2 /9 TaeguTec has launched its new AUMI that delivers improved performance over its predecessor, the AES type end mill, when machining aluminum. The new AUMI has a remarkably strong core diameter that ensures maximum rigidity of the cutting edge. This enables the AUMI to operate at extremely high speeds and feeds while delivering exceptional chip evacuation. Moreover, the enhanced vibration dampening properties compared to the existing AES type end mill achieve higher productivity levels and improved tool life. In comparison to the standard endmill product (standard & long type), the new cutter with a corner radius endmill can now be applied to mid length (M type) machining applications. FEATUES Thanks to an enlarged core diameter, AUMI can effectively eliminate vibration and improve rigidity, while delivering smooth chip evacuation during high feed machining AUMI entails excellent surface finish and wear resistance due to the application of submicron grade. AUMI can be employed for broader range of applications due to added line-up. AES..., AES 3... (regular type) AES 3...M (medium length type) AES...X, AES 3...X (extra long type) AES , AES (corner type) Existing Enlarged Core Diameter Improvement Improved end mill rigidity reduces vibration Eliminates risk of sudden cutting edge chipping and breakage Full radius Corner Type elical S-gash (Smooth cutting)

3 3/9 AES 3...M Type A 9 PM S 1 15º D d 1 Type AES 3030M B 3040M B 3050M B 300M A 3070M B 3080M A 3090M B 3100M A 310M A 3140M B 310M A 3180M B 300M A

4 4/9 AES Type A Type D d 1 AES B B B B B PM B B B TT1040 B B B A B A B A B A B B B A B B B A 40 M

5 5/9 AES Type A 9 PM S 1 TT1040 D d 1 Type AES B B B B A B A B A B A B B B A B A A

6 /9 AES...X Type A º 30 Type 40 D d 1 AES Z00X B Z030X B Z040X B Z050X B Z00X A PM Z080X Sharp emoval A Corner Corner Z100X Corner Sharp Edge Chamfer A Z10X A Z10X TT1040 A Z00X A M AES 3...X Sharp Corner Type A emoval Sharp Edge Corner Corner Chamfer 9 PM S 1 15º TT Type D d 1 AES 300X A 3080X A 3100X A 310X A 310X A 3180X PM B 3180X(80X150) B 300X A 300X(80X150) TT1040 A 50

7 7/9 AES h5 30 D d AES PM TT M

8 8/9 AES h D d AES PM TT

9 9/9 ecommended Cutting Conditions AES / AES... / AES...X PM: rev/min, Feed: mm/min Material (< Si 4%) (< Si 8%) (Die Casting) (Cu based) Diameter PM Feed PM Feed PM Feed PM Feed Ad: 1.5D educe feed by 30% for AES...X, AES 3...X d: 0.3D AES... PM: rev/min, Feed: mm/min Material (< Si 4%) (< Si 8%) (Die Casting) (Cu based) Diameter PM Feed PM Feed PM Feed PM Feed D educe feed by 30% for AES...X Ad: 1.0D