TWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
|
|
- Jody Dorthy Thomas
- 5 years ago
- Views:
Transcription
1 / PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P Shank... p 172 p 168 p 168 p 169 p 170 p 171 TN-P Shank... p 172 p 170 p 170 p 171 PROFILING TN-P Shank... p 172 p 170 p 171 FACE GROOVING TN-F00 TN-F Shank... p 179 Shank... p 175 p 169 p 170 p 171 INTERNAL GROOVING TN-H Shank... p 178 p 169 p 169 p 169 p 170 p
2 / PARTING & GROOVING / TIN-SAF SYSTEM INSERTS AND TOOLS DESCRIPTION TIN-SAF insets 28 Utility gooving Diect pessed inset Low cutting foces and good chip-contol on many mateials 380 CBN gooving fo had mateials Geneal and finish gooving of ions and had mateials Good impact esistance Maintains close toleances and excellent suface finish 38 Pecision gooving Excellent epeatability due to tight toleances on inset Low cutting foces and good chip-contol on many mateials 380 PCD gooving fo non-feous mateials High pefomance pating and gooving in highly abasive aluminum o othe non-feous alloys High speed/long tool life Maintains close toleances and excellent suface finish 48 Geneal gooving / pating Positive geomety eliminates isk of edge build-up Lowe cutting foces esulting in educed vibation 780 CBN pofiling fo had mateials Geneal and finish pofiling/adius gooving of ions and had mateials Good impact esistance Maintains close toleances and excellent suface finish 78 Radius gooving fo pofiling and tuning Geneates excellent suface finish Recommended fo stainless and heat esistant mateials 780 PCD pofiling fo non-feous mateials High pefomance pofiling and adius gooving in highly abasive aluminum o othe non-feous alloys High speed/long tool life Maintains close toleances and excellent suface finish 88 Tuning / Gooving Medium feed ate capability with good chip-contol Positive geomety minimizes edge build-up Recommended on steels and stainless steels TIN-SAF tools TN-P00 TN-P00 Gooving / Tuning toolholde Inset clamping designed to esist axial foces when tuning Inceased speed/feed without encounteing vibation poblems Uses two-edge insets fo economy TN-B02 Pating blades TN-B02 double ended, sping clamp, deep depth of cut Economical fo many applications TN-F00 TN-F90 Face gooving toolholdes Inset clamping designed to esist axial foces when face tuning TN-H90 Gooving and tuning boing ba Fo intenal gooving and tuning applications Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
3 / PARTING & GROOVING / TIN-SAF SYSTEM INSERTS TN Gooving α TN 300/00-G2N-28 G TN 400/00-H2N-28 H TN Pecision gooving ± 0.02 α TN 139/00-D2N-38 D TN 160/00-D2N-38 D TN 160/10-D2L-38 D TN 160/10-D2R-38 D TN 185/00-E2N-38 E TN 200/00-E2N-38 E TN 224/00-E2N-38 E TN 274/00-F2N-38 F TN 300/00-G2N-38 G TN 318/00-G2N-38 G TN 400/00-H2N-38 H TN 500/00-J2N-38 J TN 600/00-K2N-38 K TN 800/00-L2N-38 L Odeing example: TN 300/00-G2N Geneal Catalog
4 / PARTING & GROOVING / TIN-SAF SYSTEM INSERTS TN edges - Geneal gooving / Pating α TN 200/00-E2N-48 E TN 200/05-E2L-48 E TN 200/05-E2R-48 E TN 250/00-F2N-48 F TN 250/05-F2L-48 F TN 250/05-F2R-48 F TN 300/00-G2N-48 G TN 300/05-G2L-48 G TN 300/05-G2R-48 G TN 400/00-H2N-48 H TN 400/05-H2L-48 H TN 400/05-H2R-48 H TN 500/00-J2N-48 J TN 600/00-K2N-48 K TN edge - Geneal gooving / Pating α TN 200/00-E1N-48 E TN 300/00-G1N-48 G TN 400/00-H1N-48 H TN 500/00-J1N-48 J Odeing example: TN 200/00-E2N Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
5 / PARTING & GROOVING / TIN-SAF SYSTEM INSERTS TN Pofiling / Radius gooving ± 0.02 α TN 200/00-E2N-78 E TN 300/00-F2N-78 F TN 400/00-H2N-78 H TN 500/00-H2N-78 H TN 600/00-J2N-78 J TN 800/00-L2N-78 L TN Tun gooving α TN 300/04-G2N-88 G TN 400/04-H2N-88 H TN 400/08-H2N-88 H TN 500/04-J2N-88 J TN 500/08-J2N-88 J TN 600/04-K2N-88 K TN 600/08-K2N-88 K TN 800/08-L2N-88 L TN 800/12-L2N-88 L Odeing example: TN 200/00-E2N Geneal Catalog
6 / PARTING & GROOVING / TIN-SAF SYSTEM INSERTS TN PCD/CBN Pecision gooving ± 0.02 i i B125 D720 TN 300/00-G1N-380 G TN 400/00-H1N-380 H TN 500/00-H1N-380 H TN 600/00-J1N-380 J TN PCD/CBN Pofiling i ± 0.02 i B125 D720 TN 300/00-G1N-780 G TN 400/00-H1N-780 H TN 500/00-H1N-780 H TN 600/00-J1N-780 J TN 800/00-L1N-780 L Odeing example: TN 300/00-G1N-380 B125 Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
7 / PARTING & GROOVING / TIN-SAF SYSTEM TOOLHOLDERS TN-P00 - Deep gooving / Pating l 2 h f b Right hand shown h b f l 2 (1) Left hand TN-P00-E12R/L 1212 E TN-P00-E15R/L 1616 E TN-P00-E15R/L 2020 E TN-P00-E15R/L 2525 E TN-P00-F20R/L 1616 F TN-P00-F20R/L 2020 F TN-P00-F20R/L 2525 F TN-P00-G20R/L 1616 G TN-P00-G20R/L 2020 G TN-P00-G20R/L 2525 G TN-P00-H25R/L 1616 H TN-P00-H25R/L 2020 H TN-P00-H25R/L 2525 H TN-P00-J32R/L 2525 J TN-P00-K32R/L 2525 K TN-P00-L25R/L 2525 L Right hand Spae pats h/b E E F G G H J K L (1) Can be limited by the inset's length " " Odeing example: TN-P00-E12R Geneal Catalog
8 / PARTING & GROOVING / TIN-SAF SYSTEM TOOLHOLDERS TN-P00 N - Neutal deep gooving / Pating l 2 h f b Neutal h b f l 2 (1) TN-P00-J25N 2525 J Spae pats h/b J (1) Can be limited by the inset's length " " Odeing example: TN-P00-J25N 2525 Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
9 / PARTING & GROOVING / TIN-SAF SYSTEM TOOLHOLDERS TN-F00 - Face gooving l 2 f h b ø min ø max Right hand shown h b f l 2 (1) Ø min - Ø max Left hand Right hand TN-F00-G12R/L G TN-F00-G12R/L G TN-F00-G19R/L G TN-F00-G19R/L G TN-F00-G22R/L G TN-F00-G22R/L G TN-F00-G22R/L G TN-F00-H20R/L H TN-F00-H20R/L H TN-F00-H25R/L H TN-F00-H25R/L H TN-F00-H25R/L H TN-F00-H25R/L H TN-F00-H25R/L H TN-F00-J25R/L J TN-F00-J25R/L J TN-F00-J25R/L J TN-F00-J25R/L J TN-F00-K25R/L K TN-F00-K25R/L K TN-F00-K25R/L K Spae pats G H J K (1) Can be limited by the inset's length " " Odeing example: TN-F00-G12R Geneal Catalog
10 / PARTING & GROOVING / TIN-SAF SYSTEM TOOLHOLDERS TN-F90-90 Face gooving f b l 2 h ø min ø max Right hand shown h b f l 2 (1) Ø min - Ø max Left hand Right hand TN-F90-H20R/L H TN-F90-H20R/L H TN-F90-H20R/L H Spae pats (1) Can be limited by the inset's length " " Odeing example: TN-F90-H20R Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
11 / PARTING & GROOVING / TIN-SAF SYSTEM BLADES AND TOOL BLOCKS TN-B02 - Double-ended blade h 1 h b Seat width h h 1 b (1) TN-B02-D15N 21 D TN-B02-D15N 25 D TN-B02-E15N 21 E TN-B02-E20N 25 E TN-B02-F30N 21 F TN-B02-F55N 25 F TN-B02-G30N 21 G TN-B02-G55N 25 G TN-B02-H55N 25 H TN-B02-J55N 25 J TN-B02-K55N 25 K Neutal Optional spae pats D E F G H J K (1) Can be limited by the inset's length " " Odeing example: TN-B02-D15N Geneal Catalog
12 / PARTING & GROOVING / TIN-SAF SYSTEM BLADES AND TOOL BLOCKS Tools blocks fo blade l 2 h 2 h 1 h h 4 b b 1 b 2 h b h 1 h 2 h 4 b 1 b 2 l M Neutal Spae pats Optional spae pats Odeing example: M Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
13 / PARTING & GROOVING / TIN-SAF SYSTEM BORING BARS TN-H90 - Gooving h d 1 f D min d D min d l 2 Right hand shown d D min f l 2 h d 1 h/2 Left hand TN-H90-E05R/L 20 E TN-H90-E07R/L 25 E TN-H90-E09R/L 32 E TN-H90-G06R/L 20 G TN-H90-G07R/L 25 G TN-H90-G09R/L 32 G TN-H90-H07R/L 25 H TN-H90-H10R/L 32 H TN-H90-H11R/L 40 H Right hand Spae pats d E E G G H H (1) Can be limited by the inset's length " " Odeing example: TN-H90-E05R Geneal Catalog
SAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
More informationMini-V Precise Turning, Grooving, Threading & Face Grooving
INERNAL MACHINING Mini-V Pecise uning, Gooving, heaing & ace Gooving MERIC Innovative Gooving & uning Solutions Mini-V Mini ools fo Small & Meium Boes he Mini-V line by Goovex offes impove solutions fo
More informationTungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel
Tungsten cabide bus with cut High-capacity bus fo steel and cast steel Up to 50 % highe stock emoval pefomance when used on steel and cast steel in compaison to conventional coss cut bus Significantly
More informationTungsten carbide burrs with ALU cut High-capacity burrs for aluminium
Tungsten cabide bus with cut High-capacity bus fo aluminium Vey boad and compehensive ange, including miniatue bus fo delicate applications Extemely high stock emoval pefomance, long tool life and smooth
More informationDeep Groove Ball Bearings
Deep Goove all eaings Open type Shielded type Sealed type (non-contact) Expansion Compensating eaing 1. Design featues and special chaacteistics Deep goove ball beaings ae vey widely used. A deep goove
More informationUp to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
More informationEaton Aeroquip Triple Crown
Eaton Aeoquip Bette in evey way that mattes Tempeatue Abasion Resistance Eaton engineeing does it again. Select Aeoquip hydaulic hoses, including new MatchMate Global hoses, offe distinct advantages in
More informationTungsten carbide burrs with CAST cut High-capacity burrs for cast iron
Tungsten cabide bus with cut High-capacity bus fo cast ion Up to 100 % highe stock emoval pefomance in compaison to conventional coss cut bus Significantly inceased aggessiveness, lage chips and vey good
More informationNegative Inserts Positive Inserts. Turning Negative Inserts CN 80 Rhombic. Turning Positive Inserts CC, CP 80 Rhombic
uning Indexable s ~88 uning Indexable s Identi cation ystem olo hipbeake election egative s ositive s ow to ead pages of uning s emet / oated abide / abide ineup uning egative s 80 hombic hombic aallelogam
More informationsquareworx For every eventuality: Square shoulder, slotting and chamfering milling with only one insert
squaewox Fo evey eventuality: Squae shoulde, slotting and chamfeing milling with only one inset squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies One fo two: Squae
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Technical featues Pecision combined beaings Types AXN and ARN combined beaings and thei deivatives consist of a adial needle beaing with cage, in
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Polígono Indutial O Rebullón s/n. 36416 - Mos - España - odavigo@odavigo.com Technical featues Pecision combined beaings Types AXN and ARN combined
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings Costs savings though apid beaing eplacement at difficult to access beaing locations Contents Rapid beaing eplacement 2 Cost savings 2 Application examples 2 Replacement fo beaings
More informationTools for Aluminum. New Expanded Offering. ISO 9001 Certified
Tools for Aluminum New Expanded Offering www.kyocera-sgstool.com ISO 9001 Certified S-CAB HIGH PEFOMANCE END MILLS The original, symmetrical flute design features an engineered flute form that provides
More informationUNIWORX PLUS. All-purpose corner radius/high-feed milling cutter for countless finishing options
UNIWORX PLUS Allpupose cone adius/highfeed milling cutte fo countless finishing options uniwox plus cone adius / high feed millng cutte bodies Milling cutte bodies uniwox PLUS univesal cone adius and HIGHfeed
More informationCERAMIC INSERTS For Turning, Grooving and Milling
SPK Cutting Tools VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS CERAMIC INSERTS Fo Tuning, Gooving and Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE
More informationWorking Press. (PSI) Min. Burst Pressure. mm in fraction mm in fraction bar psi bar psi Kg/m lbs/ft feet
APPLICATION H1571 Boston Minefoce LOW & MEDIUM HIGH SPECIALTY HOSE ACCESSORRIES & ADAPTERS & Pat Numbe H157112 H157112- H1776/H1777 Boston Pefection 300 Pat Numbe Inne Tube: Modified PVC Reinfocement:
More informationslotworx Square shoulder face milling and slotting cutters with highly modern cutting edge geometry for universal applications
slotwox Squae shoulde face milling and slotting cuttes with highly moden cutting edge geomety fo univesal applications Object slotwox 177183 squae shoulde face milling cutte bodies milling cutte bodies
More informationCylindrical Roller Bearings
ylindical olle eas ontents Seies M1000, 1200, 1300, 1900, 5200, 5300, 7300 Intoduction... G-1 Pictoial Index... G-3 Selection... G-5 atings... G-7 Dimensions... G-15 Shaft Dimensions... G-25 Housing Dimensions...
More informationHCG - HORN Catalog Guide
Product line Bore Ø 217 264 S274 S223 S224 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation Type HCG - HORN Catalog Guide INTERNAL
More informationSpherical Roller Bearings. NSKHPS, redefining the standard.
Spheical Rolle Beaings NSKHPS, edefining the standad. Continually developing poducts with geate stength and highe accuacy, NSK s new NSKHPS fully incopoate the advantages of NSK s woldclass design, mateials,
More informationEPDRF. High-Precision Four Flute Corner Radius End Mills for Deep Machining FEATURES. Flute shape provides both rigidity and excellent chip removal.
High-Pecisio Fou Flute Coe Radius Ed Mills fo Deep Machiig FEATURES Flute shape povides both igidity ad excellet chip emoval. Upecedeted coe adius accuacy of ±0.005mm. Bottom flute wipe effect educes chatteig
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationEaton EMEA Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton EMEA Coe Hydaulic Hose Poducts Bochue Success made simple. The new standad fo hydaulic hose and fittings. Sometimes less is moe. Fewe poducts, smate choices. Eaton is taking a new appoach to helping
More informationBearing specification tables
eaing specification tables ontents Standad beaings Deep goove ball beaings... 4 Single-ow Open type... 8 Shielded/sealed type... 0 Snap ing goove/locating snap ing type... 3 Exta-small, miniatue ball beaings
More informationGrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family
More informationQuality from the Cutting Edge of Fabrication
Quality from the Cutting Edge of Fabrication TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - -
More informationSMART DAMPER. Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended Reach Milling A PRODUCT OF:
NEW! Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended each Milling A PODUCT OF: OVEVIEW Quick and excellent damping effect tool holder. esults From Vibration With ong
More informationQ TABLE PREVIOUS PAGE F OF CONTENTS NEXT PAGE
TABLE F OF CONTENTS FINDEX A-Z TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS......................... - GENEAL INFOMATION....................... 8 TEMS........................................
More informationCrossed Roller Bearings. Technical Information.
Cossed Rolle eaings Technical Infomation www.hiwin.tw INDUSTRIE 4.0 est Patne Multi Axis Robot Pick-and-place / Assembly / Aay and packaging / Semiconducto / Electo-Optical industy / Automotive industy
More informationInternal Turning, Profiling, Grooving & Face Machining of Small Diameters
Internl Turning, Proiling, Grooving & Fce Mchining o Smll Dimeters Insert Styles/ Applictions: MINT... Turning/Chmering MINP... Turning/Proiling MINC... Turning/45º Chmering MING... Grooving MINF... Deep
More informationRPG. Characteristics&Advantages
RPG Chaacteistics&Advantages R PG B l o ck Bo d y Lu b e R es e vo i & En d Ca p Lu b e R ete n t i o n M ed i a En d S ea l M et a l Fa m e Bo l t s Fo u R ows o f Bea i n g s Bot to m S ea l Bo l t H
More informationNEEDLE BUSHES. Polígono Indutrial O Rebullón s/n Mos - España -
NEELE USHES Polígono Inutial O Rebullón s/n. 36416 - Mos - España - oavigo@oavigo.com Technical featues Neele ushes Neele bushes consist of a thin, heat teate oute ing fome fom accuately contolle sheet
More informationBU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
More informationSafety detection solutions Safety interlock switches by actuator, with solenoid, turret head Metal, type XCS LF Plastic, type XCS LE
Pesentation by actuato, with solenoid, tuet head opeating by actuato With emegency elease mushoom head pushbutton Pages / and / Pages /6 and / opeating by actuato Pages / and / Envionment chaacteistics
More informationTriple-Sealed Bearings for Bearing Units
Fo New Technology Netwok copoation R Tiple-Sealed eaings fo eaing Units NTN Tiple-Sealed eaings fo eaing Units These eliable tiple-sealed beaings ae dustpoof and watepoof. They ensue a longe beaing life
More informationCERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings osts savings though api beaing eplacement at ifficult to access beaing locations Application examples Application examples in the pulp an pape inusty: Fans an ventilatos Mixing
More informationQuality from The Cutting Edge of Fabrication
Quality from The Cutting Edge of Fabrication TABLE OF CONTENTS PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 4 DIES - -
More informationOPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE
ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE -800-637-0005 WWW.EUROTECHSEATING.COM ASSEMBLY INSTRUCTIONS CHAIR NAME AND SKU OR MODEL Remove all items fom the caton. Veify all
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationBall and Roller Bearings
R Ball and Rolle Beaings CAT. NO. 222-)!/E Waanty NTN waants, to the oiginal puchase only, that the deliveed poduct which is the subject of this sale (a) will confom to dawings and specifications mutually
More informationPart List ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI. Seat. Armrests. Star Base. Caster. Arm Bolts. Back Bolts (M8 X 15mm) J K.
ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI Pat List Key Desciption Pat Qty. Spae A FUZ5B-LO Backest B FUZ6B-HI Backest C Seat D Amests ( left & ight amest) 2 E Seat Post(Cylinde) F Sta Base G Caste 5 H Am
More informationLarge Size Tapered Roller Bearings ULTAGE Metric Series
Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies AT. No. 3035/E Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies Lage size tapeed olle beaings (ULTAGE metic seies, OD 270) delive longe life, highe load
More informationFull complement cylindrical roller bearings
Full complement cylindical olle beaings INTERPRECISE Donath GmbH Osting 2 90587 Obemichelbach Gemany Phone +49-911-76630-0 Fax +49-911-76630-30 info@intepecise.de www.idc-beaings.com Full complement cylindical
More informationGrooving and Cut-Off.
Grooving Application Guide...........................................................D2 D3 Grades and Grade Descriptions.......................................................D4 D7 A2 Cut-Off................................................................D8
More informationmultidec -MULTITASK WILLEMIN-MACODEL NEW PROGRAMM OF TOOL-HOLDERS FOR TURNING AND MILLING MACHINING CENTERS
multidec -MUTITASK NEW POGAMM OF TOO-HODES FO TUNING AND MIING MACHINING CENTES WIEMIN-MACODE THE TOO FO EFFICIENT TUNING OPEATIONS ON MUTITASK MACHINES FOM WIEMIN-MACODE (TYPES 408 MT, 508 MT AND 508
More informationCONTENTS TECHNICAL CNMG/M DNMG KNUX SNMG/M TNMG VNMG WNMG
CONTENTS NEGATIVE INSERTS POSITIVE INSERTS CNMG/M 80º RHOMB PAGE 01 CCMT PAGE 08 80º RHOMB DNMG 55º RHOMB PAGE 02 DCMT PAGE 09 55º RHOMB KNUX 55º PARALLELOGRAM PAGE 0 RCMT PAGE 10 ROUND SNMG/M 90º SQUARE
More informationHard metals for precision tools
had mateial mattes Had metals fo pecision tools CERATIZIT - the paent companies Headquates and paent company in MAMER / Luxemboug Paent company in REUTTE / Austia iect sales and distibution patnes 2 Ou
More informationStandard Styles inch/metric
Rolle eaings Radial Cylindical Rolle eaings oe inch: metic: 200 20.0 in. 200 200 mm 42 4.25 in. 210 210 mm 43 4.375 in. 220 220 mm standad sizes standad sizes ae 4-27.20 inch ae 100-600 mm Standad Styles
More informationRoller Bearings for Machine Tools. Precision Ball & Roller Bearings for Machine Tools
Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools CAT. NO. B2005E-1 Catalog Pecision Ball & Rolle Beaings fo Machine Tools Peface
More informationSingle Row Deep Groove Ball Bearings
Single Row eep Goove all eaings Single Row eep Goove all eaings The single ow eep goove ball beaings have elatively eep aceways on both ings without a filling slot an ae non-sepaable. High loa atings ae
More informationFlexible hose solutions
Aeoquip Hose Assembly Maste Catalog Flexible hose solutions Ai conditioning and efigeation hose hose GH001.... -3 GH134.... -4 FC802... -4 FC800... -5 FC555... -6 AROQUIP MASTR CATALOG A-HOOV-MC001-3
More informationSpherical Roller Bearings
1. Types, constuction an chacteistics Spheical olle beaings consist of an oute ing having a continuous spheical ceway within which opetes two ows of bael-shape olles which ae in tun guie by an inne ing
More informationTechnical Information, MDT Index
Technical Information, MDT Index MDT - Multi Directional Turning Page General information................................. 299 Code keys......................................... 300-304 Toolholder selection.................................
More informationSUPER PRECISION BEARINGS
SUPER PRECISION BEARINGS Intoduction As technologies evolve, all manufactues shae a global esponsibility to espect and potect the envionment. NSK Motion and Contol poducts eflect ou copoate commitment
More informationHCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
More informationImproved Grooving Performance with Expansive Tooling System Lineup
KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD
More informationGeneral Bearings LARGE SIZE BALL & ROLLER BEARINGS CAT. NO. B2002E
LARGE SIZE ALL & ROLLER EARINGS Geneal eaings CAT. NO. 22E 1 2 Selection of beaing imensions 4 eaing toleances 13 3 4 eaing fits 31 5 Lubication 52 7 Examples of failues 66 Intenal cleaance 43 6 eaing
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-03 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. Our products are sold through distributors
More informationZEPHYR ZT802X POSITIVE FEED DRILL
EPHY G O U P TOOLS ENGINEEED TO PEFOM T802X POSITIVE FEED DILL A 90 DEGEE, MANUALLY OPEATED ANGLE DILL WITH AUTO ETACT AND MINIMUM SPINDLE OFFSET PEMITS USE IN ESTICTED AEAS Specifications ephyr's new
More informationGrooving, Cut-Off, and Turning
Grooving, Cut-Off, and Turning Grooving Application Guide..........................................................................D2 D3 WMT Grooving, Cut-Off, and Turning................................................................D4
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2017-08 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationSimulink Modeling for Hybrid Vehicle Dynamic Characteristics
EVS28 KINTEX, Koea, May 3-6, 215 Simulink Modeling fo Hybid Vehicle Dynamic Chaacteistics Dae-Kee Kim 1, Dong-Min Kim 1, Seung-Hee Chai 1, Jung-Pyo Hong 1, Senio Membe, IEEE 1 Deatment of Automotive Engineeing,
More informationOperating Instructions High-pressure pumps
MAXIMATOR HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Opeating Instuctions High-pessue pumps issue 08.2007 MAXIMATOR GmbH Walkeniede Staße 15 D-37449 Zoge Gemany Telefon 0 55 86 /
More informationX-life High-Speed Spindle Bearings M. High-performance series for maximum productivity and low operating costs
X-life High-Spee Spinle eaings M High-pefomance seies fo maximum pouctivity an low opeating costs High-pefomance seies fo maximum pouctivity X-life High-Spee Spinle eaings M Tool spinles an, in paticula,
More informationTHE TCCS SYSTEM UTILIZES A MICROCOMPUTER AND MAINTAINS OVERALL CONTROL OF THE E/G, T/M, ETC. AN OUTLINE OF ENGINE CONTROL IS GIVEN HERE.
SSTEM OUTLINE THE TCCS SSTEM UTILIZES A MICOCOMPUTE AND MAINTAINS OVEALL CONTOL OF THE E/G, T/M, ETC. AN OUTLINE OF ENGINE CONTOL IS GIVEN HEE.. INPUT SIGNALS () ATE TEMP. SIGNAL SSTEM THE ATE TEMP. SENSO
More informationChemical Composition(%)
76 ヤイラカイ憘キコマ-5.in 76 2005-11-25 16:23:17 1. Mateials fo T Tapee olle eaing s Oute ing, Inne ing & olling Elements The most common though-haening steel use fo T olling beaing is a cabon chomium steel containing
More informationAngles Hot rolled, weldable structural steel sections
Data sheet: E3.1 Angles Hot olled, weldable stuctual steel sections Geneal desciption AceloMittal Steel South Afica, Newcastle Steel poduces an extensive ange of stuctual steel angles. Non-standad sizes
More informationT-Max Q-Cut. System with 1 cutting edge PARTING AND GROOVING. For deep parting, internal grooving and small diameter face grooving
System with 1 cutting edge For deep parting, internal grooving and small diameter face grooving Toolholder assortment There are a wide range of different toolholders for inserts options - 151.2 for deep
More informationSolutions for a wide variety of applications
Aeoquip Hose Assembly Maste atalog Solutions fo a wide vaiety of applications Geneal pupose hose Geneal pupose hose H201... -3 F332... -4 F647... -4 2556/2565.... -5 F598... -6 F498... -6 F466... -7 2583.....................................
More informationLimit Switches Matsushita Electric Works, Ltd. Matsushita Electric Works, Ltd. Limit Switches ARCT1B272E Please contact...
06 07 06 07 Please contact... ARCT1B272E 200609-1YT These mateials ae pinted on ECF pulp. These mateials ae pinted with eath-fiendly vegetable-based (soybean oil) ink. Specifications ae subject to change
More informationCylindrical Roller Bearings EW Series
Cylindical Rolle Beaings NSK has developed a highe load-caying capacity pessed cage with low noise and supeio cage stength. Ou seies is a standad cylindical olle beaing that facilitates intechangeability
More informationCoated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter
AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationGeneral Bearings LARGE SIZE BALL & ROLLER BEARINGS CAT. NO. B2002E-2
LARGE SIZE ALL & ROLLER EARINGS Geneal eaings CAT. NO. 22E-2 1 2 Selection of beaing imensions 4 eaing toleances 17 3 4 eaing fits 35 5 Lubication 56 7 Examples of failues 7 Intenal cleaance 47 6 eaing
More informationGBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker
G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges
More informationKOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools Turning, Facing & Grooving System KOOL Cut Modular Turning, Facing & Grooving System-Technology KOOL Cut Graphic Index ---------------------------------------------------------------------------------------------------------------------------------
More informationInch Series TAPERED ROLLER BEARINGS
Inch Seies APERED ROLLER EARINGS Inch Seies APERED ROLLER EARINGS Publication of New Inch seies apeed Rolle eaing Catalog Allow us to expess ou heatfelt appeciation fo you valuable patonage. At this time
More informationKGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off
Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high
More informationPrecision Rolling Bearings
R Pecision Rolling Beaings CAT. No. 226-^/E C O N T E N T S Technical Data NTN PRECISION ROLLING BEARINGS Main Spindle Beaings Ball Scew Suppot Beaings NTN PRODUCTS APPENDIX 1. Classification of Pecision
More informationMAE 412 Machines and Mechanisms 2: Catapult Project 12/13/02
MAE 1 Machines and Mechanisms : Catapult Poject 1/1/0 Michael Kuczewski Nicholas Laatta Jonathan Leahy Nicholas Leone Kuan Kiong Lim William Louisos Atuo Machuca Jeemy Malik Intoduction: The goup s task
More informationKGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
More informationBall & Roller Bearings
all & Rolle eaings CAT. NO. 1E-4 1 Stuctues and types A 1 Outline of selection A 14 3 Selection of type A 16 4 Selection of aangement A 5 Selection of dimensions A 4 ounday dimensions 6 A 46 and beaing
More information4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life
DRILLING DRILLING INDEXABLE DRILLING Multi-Mat TM indexable drilling solutions for general drilling in a variety of materials. SPMG Multi-Mat TM drilling inserts are designed with optimized grade and geometry
More informationCLEAN FITTING (C SERIES / CL SERIES)
N ITTING ( SIS / SIS) pplication - lean ai, Pue wate, Medicinal fluid fo piping eatue - ll of the pats ae washed, assembled and packed in a clean oom and completely oil-fee poducts which did not use any
More informationORDERING INFORMATION5
ODEING INFOMATION5 21.65 [] Standard Lengths: = mm (9.84") = mm (20.08") ized = mm (21.6") 21.65 [] ized Lengths: 120mm 4.724 (2) 75mm 2.953" 45mm 1.772 (2) 40mm 1.575 35mm 1.378" 30mm 1.181 (2) 25mm 0.984
More information1. TYPES AND FEATURES OF ROLLING BEARINGS Part B BEARING HANDLING. Part C ANGULAR CONTACT BALL BEARINGS SPHERICAL ROLLER BEARINGS. Part D.
Pat A 1. TYPES AND FEATURES OF ROLLING EARINGS Pat EARING HANDLING 2.SELECTION OF EARING TYPES 3.SELECTION OF EARING ARRANGEMENT 4.SELECTION OF EARING SIZE 5.SPEEDS 6. OUNDARY DIMENSIONS AND IDENTIFYING
More informationF. R. L. FRL Series MC Assembled. Ports G1/4, G3/8 and G1/2
MC S E R I E S Catalogue 2005-200 FRL Series MC Assembled Ports G1/4, G3/8 and G1/2 The FRL Series MC in the assembled version are more easy to order (one single code) and to mount. The versione with terminal
More informationRailway Hose Brochure. High-performance railway hose meets R22/R23 test requirements for hazard levels 3 and 3
Railway Hose Bochue High-pefomance ailway hose meets R22/R23 test equiements fo hazad levels 3 and 3 The challenge facing the ail industy is to make ail tavel as eliable, efficient, safe and comfotable
More informationTechnical Information. Deep Groove Ball Brgs. Angular Contact Ball Brgs. Cylindrical Roller Brgs. Full-Complement Cylindrical Roller Brgs.
Technical Infomation Page No. A7 Tech. Info. Deep Goove all gs. 4 Angula Contact all gs. 20 Cylindical Rolle gs. 44 Full-Complement Cylindical Rolle gs. 78 Tapeed Rolle gs. 96 Spheical Rolle gs. 286 Thust
More informationProjects Oil & Gas. Section Sales Programme
Pojects Oil & Gas Section Sales Pogae 1 2 To e ou pefeed supplie & eliale patne fo te suppl of complete and customized stuctual steel packages. celomittal Ou famil celomittal Wit annual acievale poduction
More informationGrooving and Cut-Off.
Grooving Application Guide...........................................................D2 D3 Grades and Grade Descriptions.......................................................D4 D7 A2 Cut-Off................................................................D8
More informationTable 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
More informationGESTRA Product Overview. The optimum components for every application
GESTRA Poduct Oveview The optimum components fo evey application Steam Taps Non-Retun-Valves BK Range Steam taps with egulato of DUO stainless steel up to PN 630. BK taps ae suited to the toughest opeating
More informationInternational Motors/Gearmotors/Controls
International Motors/Gearmotors/Controls AC INTENATIONAL PODUCTS INTODUCTION The metric products listed in this section have been designed with international design standards in mind. The 230 volt, 50
More informationSECTION 32 - PAD-MOUNTED CAPACITORS TABLE OF CONTENTS
. PAD-MOUNTED CAPACITOS PAD-MOUNTED CAPACITO PAD-MOUNTED CAPACITO.-A.-B. PAD-MOUNTED CAPACITO OPEATIONS PAD-MOUNTED CAPACITOS ENEGIZING PAD-MOUNTED CAPACITO DE-ENEGIZING PAD-MOUNTED CAPACITO PAD-MOUNTED
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationAccessories for Safety Switches
ccessoies fo Safety Switches s fo safety switches NZ.VZ, NZ.VZ.VS and TZ Two stainless safety s pe actuato Inceased ovetavel optional 25 pieces optional Z-G staight Ovetavel 4 mm Z-GME staight Ovetavel
More information