SAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
|
|
- Ernest Spencer
- 6 years ago
- Views:
Transcription
1 / PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING N2 N3 N4 N5 G4 Sank... p 185 Sank... p 186 p 180 p 180 p 181 p 181 p P4 U4 G4 Sank... p 185 Sank... p 186 p 183 p 183 p 182 PROFILING P4 Sank... p 185 Sank... p 186 p 183 UNDERCUTTING S U4 Sank... p 188 p 183 FACE GROOVING F G G43 Sank... p 188 Sank... p 188 p 182 INTERNAL GROOVING AG G43 Sank... p 191 p
2 / PARTING & GROOVING / SAF-CUT SYSTEM INSERTS AND TOOLS DESCRIPTION SAF-CUT insets N2 Cutt-off Optimal pating and ligt gooving geomety Minimizes pips and us wen pating as and tues Excellent fo stainless, low caon steel, ig temp alloys G4 Pecision gooving Excellent epeataility due to tigt toleances Low cutting foces N3 Fine gooving / Pating Good cip contol and modeate cutting foces Recommended fo tues and stainless steel G43 Face gooving - Pecision Metic & ciclips gooves Low cutting foces N4 Geneal gooving / Pating Stong geomety ideal fo inteupted cuts Fo pating-off steel and cast ions P4 Radius gooving / Pofiling Designed fo adius gooving and pofiling on all mateials Geneates excellent suface finis N5 Ligt gooving / Pating Altenate ligt gooving and pating geomety Geneates low cutting foces Fo stainless steels, ductile and wok adening mateials U4 Undecutting gooves Fo tuning of undecuts and eliefs Inceased cleaance angle pemits undecutting SAF-CUT tools Reinfoced sping clamp pating toololde Reinfoced clamping fo ette inset seating and lowe viation Small sanks fo lowe osepowe macines Doule-ended pating lades Ideal fo pating-off as and tues Economical system fo many applications Gooving, tuning and pofiling toololde Sot eac fo minimal deflection in tuning and pofiling Scew clamp fo secue inset seating and lowe viation Face gooving toololdes Availale 0 & 90 Scew clamp fo secue inset seating and lowe viation Deep gooving and pating toololde Excellent fo deep gooving opeation Scew clamp fo secue inset seating and lowe viation AG Boing as fo gooving, tuning & pofiling All intenal opeations Scew clamp fo secue inset seating and lowe viation S Gooving and undecut tuning toololde Designed fo undecutting and tuning at 45 Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
3 / PARTING & GROOVING / SAF-CUT SYSTEM INSERTS LCMX-R/N/L2 - Pating / Ligt gooving 7 6 L N R Gades LCMX N LCMX L LCMX R LCMX N LCMX L LCMX R LCMX L LCMX R LCMX N LCMX L LCMX R LCMX L LCMX R LCMX N LCMX-N3 - Geneal gooving / Pating 7 6 Odeing example: LCMX N Gades LCMX N LCMX N LCMX N LCMX N Geneal Catalog
4 / PARTING & GROOVING / SAF-CUT SYSTEM INSERTS LCMX-R/N/L4 - Heavy gooving / Pating 7 6 L N R Gades N LCMX N LCMX N LCMX L LCMX R LCMX N LCMX L LCMX R LCMX N LCMX N LCMX N LCMX-R/N/L5 - Ligt gooving / Pating 7 6 L N R Odeing example: LCMX N Gades LCMX N x45 0 LCMX L LCMX R x45 8 LCMX L x45 15 LCMX R x45 15 LCMX N x45 0 LCMX L LCMX R x45 15 Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
5 / PARTING & GROOVING / SAF-CUT SYSTEM INSERTS LCGX-G4 - Pecision gooving 7 3 Gades fo ciclips N LCGX G LCGX G LCGX G LCGX G LCGX G LCGX G LCGX G LCGX G LCGX G LCGX-G43 - Pecision face gooving 7 3 Tese insets ae only suitale wit tools F , G and AG Odeing example: LCGX G Gades fo ciclips N LCGX G LCGX G LCGX G LCGX G LCGX G LCGX G LCGX G Geneal Catalog
6 / PARTING & GROOVING / SAF-CUT SYSTEM INSERTS LCGX-P4 - Radius gooving / Pofiling 7 7 Gades N LCGX P LCGX P LCGX P LCGX P LCGX P L.GX-U4 - Undecut gooving Odeing example: LCGX P Gades LBGX U LCGX U Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
7 / PARTING & GROOVING / SAF-CUT SYSTEM TOOLHOLDERS Gooving D max f l 2 Rigt and sown f l 2 D max Left and R/L R/L R/L R/L R/L R/L R/L R/L A R/L A R/L Rigt and Optional spae pats Odeing example: R Geneal Catalog
8 / PARTING & GROOVING / SAF-CUT SYSTEM TOOLHOLDERS Gooving / Pofiling a f l 2 Rigt and sown f l 2 a Left and R/L F R/L F R/L F R/L F R/L F R/L F R/L F R/L F R/L F R/L F R/L F R/L F Rigt and Odeing example: R F Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
9 / PARTING & GROOVING / SAF-CUT SYSTEM TOOLHOLDERS Deep gooving / Pating a f l 2 Rigt and sown f l 2 a Left and R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M R/L F M Rigt and Odeing example: R F M1 186 Geneal Catalog
10 l 2 / PARTING & GROOVING / SAF-CUT SYSTEM TOOLHOLDERS S Undecut tuning 45 f Rigt and sown f l 2 Left and R/L S R/L S R/L S Rigt and Odeing example: R S Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
11 / PARTING & GROOVING / SAF-CUT SYSTEM TOOLHOLDERS F Face gooving - 0 l 2 f a ø min ø max f l 2 a Left and R/L F B R/L F B Tese tools only allows insets LCGX-G43 Rigt and sown Rigt and G Face gooving - 90 f a l 2 ø min ø max Rigt and sown Odeing example: R F B25 f l 2 a Left and R/L G B Tese tools only allows insets LCGX-G Rigt and 188 Geneal Catalog
12 / PARTING & GROOVING / SAF-CUT SYSTEM BLADES AND TOOL BLOCKS Doule-ended lade a Seat widt 1 a Neutal Optional spae pats Odeing example: Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
13 / PARTING & GROOVING / SAF-CUT SYSTEM BLADES AND TOOL BLOCKS Tools locks fo lade l l M Neutal Optional spae pats Odeing example: M Geneal Catalog
14 / PARTING & GROOVING / SAF-CUT SYSTEM BORING BARS AG Gooving / Tuning / Pofiling d 1 f a l 2 D min d D min f l 2 d 1 a /2 d Left and R/L AG M R/L AG Q R/L AG R R/L AG S Tese tools only allows insets LCGX-G43 Rigt and sown Rigt and Odeing example: R AG M-20 Custome Sevice - Tel.: +33 (0) Fax: +33 (0)
TWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
/ PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B02 48 380 Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P00 28 38 48 88 380 Shank... p 172 p 168 p 168
More informationMini-V Precise Turning, Grooving, Threading & Face Grooving
INERNAL MACHINING Mini-V Pecise uning, Gooving, heaing & ace Gooving MERIC Innovative Gooving & uning Solutions Mini-V Mini ools fo Small & Meium Boes he Mini-V line by Goovex offes impove solutions fo
More informationsquareworx For every eventuality: Square shoulder, slotting and chamfering milling with only one insert
squaewox Fo evey eventuality: Squae shoulde, slotting and chamfeing milling with only one inset squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies One fo two: Squae
More informationUNIWORX PLUS. All-purpose corner radius/high-feed milling cutter for countless finishing options
UNIWORX PLUS Allpupose cone adius/highfeed milling cutte fo countless finishing options uniwox plus cone adius / high feed millng cutte bodies Milling cutte bodies uniwox PLUS univesal cone adius and HIGHfeed
More informationCERAMIC INSERTS For Turning, Grooving and Milling
SPK Cutting Tools VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS CERAMIC INSERTS Fo Tuning, Gooving and Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE
More informationNegative Inserts Positive Inserts. Turning Negative Inserts CN 80 Rhombic. Turning Positive Inserts CC, CP 80 Rhombic
uning Indexable s ~88 uning Indexable s Identi cation ystem olo hipbeake election egative s ositive s ow to ead pages of uning s emet / oated abide / abide ineup uning egative s 80 hombic hombic aallelogam
More informationRPG. Characteristics&Advantages
RPG Chaacteistics&Advantages R PG B l o ck Bo d y Lu b e R es e vo i & En d Ca p Lu b e R ete n t i o n M ed i a En d S ea l M et a l Fa m e Bo l t s Fo u R ows o f Bea i n g s Bot to m S ea l Bo l t H
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings Costs savings though apid beaing eplacement at difficult to access beaing locations Contents Rapid beaing eplacement 2 Cost savings 2 Application examples 2 Replacement fo beaings
More informationNew High Pressure Coolant Capable Groove-Turning and Parting Tools
1/10 New Hig Pressure Coolant Capable Groove-Turning and Parting Tools 2/10 In order to meet te macining needs of difficult-to-cut materials suc as titanium, inconel and oter eat resistant alloys, TaeguTec
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Technical featues Pecision combined beaings Types AXN and ARN combined beaings and thei deivatives consist of a adial needle beaing with cage, in
More informationslotworx Square shoulder face milling and slotting cutters with highly modern cutting edge geometry for universal applications
slotwox Squae shoulde face milling and slotting cuttes with highly moden cutting edge geomety fo univesal applications Object slotwox 177183 squae shoulde face milling cutte bodies milling cutte bodies
More informationDeep Groove Ball Bearings
Deep Goove all eaings Open type Shielded type Sealed type (non-contact) Expansion Compensating eaing 1. Design featues and special chaacteistics Deep goove ball beaings ae vey widely used. A deep goove
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Polígono Indutial O Rebullón s/n. 36416 - Mos - España - odavigo@odavigo.com Technical featues Pecision combined beaings Types AXN and ARN combined
More informationTungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel
Tungsten cabide bus with cut High-capacity bus fo steel and cast steel Up to 50 % highe stock emoval pefomance when used on steel and cast steel in compaison to conventional coss cut bus Significantly
More informationCut-Off Tools. SumiGrip Jr. SumiGrip. SEC-Small Diameter Cut-off Tools SEC-Grooving / Cut-Off Tools
Tools 33 to 46 Tools Tools SumiGrip Jr. SumiGrip SEC-Small Diameter Cut-off Tools SEC- / Tools SEC- Tool Series Selection Guide 34 Introduction of SumiGrip 35 STH Type 36 STS Type 37 WCH Type 38 WCS Type
More informationStandard Styles inch/metric
Rolle eaings Radial Cylindical Rolle eaings oe inch: metic: 200 20.0 in. 200 200 mm 42 4.25 in. 210 210 mm 43 4.375 in. 220 220 mm standad sizes standad sizes ae 4-27.20 inch ae 100-600 mm Standad Styles
More informationBearing specification tables
eaing specification tables ontents Standad beaings Deep goove ball beaings... 4 Single-ow Open type... 8 Shielded/sealed type... 0 Snap ing goove/locating snap ing type... 3 Exta-small, miniatue ball beaings
More informationInternal Turning, Profiling, Grooving & Face Machining of Small Diameters
Internl Turning, Proiling, Grooving & Fce Mchining o Smll Dimeters Insert Styles/ Applictions: MINT... Turning/Chmering MINP... Turning/Proiling MINC... Turning/45º Chmering MING... Grooving MINF... Deep
More informationCylindrical Roller Bearings
ylindical olle eas ontents Seies M1000, 1200, 1300, 1900, 5200, 5300, 7300 Intoduction... G-1 Pictoial Index... G-3 Selection... G-5 atings... G-7 Dimensions... G-15 Shaft Dimensions... G-25 Housing Dimensions...
More informationEPDRF. High-Precision Four Flute Corner Radius End Mills for Deep Machining FEATURES. Flute shape provides both rigidity and excellent chip removal.
High-Pecisio Fou Flute Coe Radius Ed Mills fo Deep Machiig FEATURES Flute shape povides both igidity ad excellet chip emoval. Upecedeted coe adius accuacy of ±0.005mm. Bottom flute wipe effect educes chatteig
More informationHCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
More informationEaton EMEA Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton EMEA Coe Hydaulic Hose Poducts Bochue Success made simple. The new standad fo hydaulic hose and fittings. Sometimes less is moe. Fewe poducts, smate choices. Eaton is taking a new appoach to helping
More informationCrossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
More informationCONTENTS TECHNICAL CNMG/M DNMG KNUX SNMG/M TNMG VNMG WNMG
CONTENTS NEGATIVE INSERTS POSITIVE INSERTS CNMG/M 80º RHOMB PAGE 01 CCMT PAGE 08 80º RHOMB DNMG 55º RHOMB PAGE 02 DCMT PAGE 09 55º RHOMB KNUX 55º PARALLELOGRAM PAGE 0 RCMT PAGE 10 ROUND SNMG/M 90º SQUARE
More informationCrossed Roller Bearings. Technical Information.
Cossed Rolle eaings Technical Infomation www.hiwin.tw INDUSTRIE 4.0 est Patne Multi Axis Robot Pick-and-place / Assembly / Aay and packaging / Semiconducto / Electo-Optical industy / Automotive industy
More informationTHE COMPLETE GROOVING SYSTEM. Part 2. Two cutting edge inserts in the width range mm. Toolholders for OD and ID machining
olid carbide coated wit PVD and CVD layer PCD MCD CBN THE COMPETE GROOVING SYSTEM Part 2 Two cutting edge inert in te widt range 2.0-6.0 mm Toololder for OD and ID macining Toololder for radial and axial
More informationTungsten carbide burrs with ALU cut High-capacity burrs for aluminium
Tungsten cabide bus with cut High-capacity bus fo aluminium Vey boad and compehensive ange, including miniatue bus fo delicate applications Extemely high stock emoval pefomance, long tool life and smooth
More informationProjects Oil & Gas. Section Sales Programme
Pojects Oil & Gas Section Sales Pogae 1 2 To e ou pefeed supplie & eliale patne fo te suppl of complete and customized stuctual steel packages. celomittal Ou famil celomittal Wit annual acievale poduction
More informationAngles Hot rolled, weldable structural steel sections
Data sheet: E3.1 Angles Hot olled, weldable stuctual steel sections Geneal desciption AceloMittal Steel South Afica, Newcastle Steel poduces an extensive ange of stuctual steel angles. Non-standad sizes
More informationQuality from the Cutting Edge of Fabrication
Quality from the Cutting Edge of Fabrication TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - -
More informationWorking Press. (PSI) Min. Burst Pressure. mm in fraction mm in fraction bar psi bar psi Kg/m lbs/ft feet
APPLICATION H1571 Boston Minefoce LOW & MEDIUM HIGH SPECIALTY HOSE ACCESSORRIES & ADAPTERS & Pat Numbe H157112 H157112- H1776/H1777 Boston Pefection 300 Pat Numbe Inne Tube: Modified PVC Reinfocement:
More informationBU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
More informationSolutions for a wide variety of applications
Aeoquip Hose Assembly Maste atalog Solutions fo a wide vaiety of applications Geneal pupose hose Geneal pupose hose H201... -3 F332... -4 F647... -4 2556/2565.... -5 F598... -6 F498... -6 F466... -7 2583.....................................
More informationNEEDLE BUSHES. Polígono Indutrial O Rebullón s/n Mos - España -
NEELE USHES Polígono Inutial O Rebullón s/n. 36416 - Mos - España - oavigo@oavigo.com Technical featues Neele ushes Neele bushes consist of a thin, heat teate oute ing fome fom accuately contolle sheet
More informationSpherical Roller Bearings. NSKHPS, redefining the standard.
Spheical Rolle Beaings NSKHPS, edefining the standad. Continually developing poducts with geate stength and highe accuacy, NSK s new NSKHPS fully incopoate the advantages of NSK s woldclass design, mateials,
More informationQuality from The Cutting Edge of Fabrication
Quality from The Cutting Edge of Fabrication TABLE OF CONTENTS PUNCH HOLDES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 4 DIES - -
More informationQ TABLE PREVIOUS PAGE F OF CONTENTS NEXT PAGE
TABLE F OF CONTENTS FINDEX A-Z TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS......................... - GENEAL INFOMATION....................... 8 TEMS........................................
More informationISOTURN TOOLS. SSBCR/L 75 Lead Angle Screw Lock Tools Carrying the Square Inserts with 7 Clearance Angle
BCR/L 75 Lea Ange cew Lock Toos Caying te quae Insets wit Ceaance Ange 2 1 b 75 Rigt-an sown Designation b 1 2 Ga G Inset BCR/L 1616H-09 16.0 16.0 100.00 15.0 13.0 0 0 C.. 09T3 R 16-236 T-15/5 BCR/L 2020K-12
More informationFestoon systems for cables and hoses
Darwinstraat 10 N 6718 XR Ede Te Neterlands Flexile wit energy! Pone +31 (0)342 403900 Fax +31 (0)342 403912 email info@akapp.com UR www.akapp.com Festoon systems for cales and oses AKAPP Festoon installation
More informationPart List ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI. Seat. Armrests. Star Base. Caster. Arm Bolts. Back Bolts (M8 X 15mm) J K.
ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI Pat List Key Desciption Pat Qty. Spae A FUZ5B-LO Backest B FUZ6B-HI Backest C Seat D Amests ( left & ight amest) 2 E Seat Post(Cylinde) F Sta Base G Caste 5 H Am
More informationEAS -element clutch EAS -elements
EAS -element clutch EAS -elements www..com Immediate sepaation in case of oveload Fo high speeds and long un-out times High switch-off and epetitive accuacies Integation into existing constuctions possible
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings osts savings though api beaing eplacement at ifficult to access beaing locations Application examples Application examples in the pulp an pape inusty: Fans an ventilatos Mixing
More informationRoller Bearings for Machine Tools. Precision Ball & Roller Bearings for Machine Tools
Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools CAT. NO. B2005E-1 Catalog Pecision Ball & Rolle Beaings fo Machine Tools Peface
More informationEaton Aeroquip Triple Crown
Eaton Aeoquip Bette in evey way that mattes Tempeatue Abasion Resistance Eaton engineeing does it again. Select Aeoquip hydaulic hoses, including new MatchMate Global hoses, offe distinct advantages in
More informationUp to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
More informationTriple-Sealed Bearings for Bearing Units
Fo New Technology Netwok copoation R Tiple-Sealed eaings fo eaing Units NTN Tiple-Sealed eaings fo eaing Units These eliable tiple-sealed beaings ae dustpoof and watepoof. They ensue a longe beaing life
More informationNOS. 497A, 497B, AND D TOOLS (PORTABLE PLUG CLEANING MACHINES) PIECE-PART DATA AND REPLACEMENT PROCEDURES
BELL SYSTEM PRACTICES PlantSeies SECTION 075-125-801 issue2, Octobe,1954 AT&TCo Standad NOS. 497A, 497B, AND D-1 59798 TOOLS (PORTABLE PLUG CLEANING MACHINES) PIECE-PART DATA AND REPLACEMENT PROCEDURES
More informationLarge Size Tapered Roller Bearings ULTAGE Metric Series
Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies AT. No. 3035/E Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies Lage size tapeed olle beaings (ULTAGE metic seies, OD 270) delive longe life, highe load
More informationFull complement cylindrical roller bearings
Full complement cylindical olle beaings INTERPRECISE Donath GmbH Osting 2 90587 Obemichelbach Gemany Phone +49-911-76630-0 Fax +49-911-76630-30 info@intepecise.de www.idc-beaings.com Full complement cylindical
More informationSECTION 32 - PAD-MOUNTED CAPACITORS TABLE OF CONTENTS
. PAD-MOUNTED CAPACITOS PAD-MOUNTED CAPACITO PAD-MOUNTED CAPACITO.-A.-B. PAD-MOUNTED CAPACITO OPEATIONS PAD-MOUNTED CAPACITOS ENEGIZING PAD-MOUNTED CAPACITO DE-ENEGIZING PAD-MOUNTED CAPACITO PAD-MOUNTED
More informationSelf Contained Dual Shaft Body Less Valve Gate Nozzle System, Single Application
DSB-500 Self Contained Dual Shaft Body Less Valve Gate Nozzle System, Single Application NOZZLE DESCRIPTION: The "DSB-500 Nozzle Assembly is furnished with a heated radius cap and locating ring (Ø3.990)
More informationGeneral Bearings LARGE SIZE BALL & ROLLER BEARINGS CAT. NO. B2002E
LARGE SIZE ALL & ROLLER EARINGS Geneal eaings CAT. NO. 22E 1 2 Selection of beaing imensions 4 eaing toleances 13 3 4 eaing fits 31 5 Lubication 52 7 Examples of failues 66 Intenal cleaance 43 6 eaing
More informationTungsten carbide burrs with CAST cut High-capacity burrs for cast iron
Tungsten cabide bus with cut High-capacity bus fo cast ion Up to 100 % highe stock emoval pefomance in compaison to conventional coss cut bus Significantly inceased aggessiveness, lage chips and vey good
More informationGeneral Bearings LARGE SIZE BALL & ROLLER BEARINGS CAT. NO. B2002E-2
LARGE SIZE ALL & ROLLER EARINGS Geneal eaings CAT. NO. 22E-2 1 2 Selection of beaing imensions 4 eaing toleances 17 3 4 eaing fits 35 5 Lubication 56 7 Examples of failues 7 Intenal cleaance 47 6 eaing
More informationOPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE
ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE -800-637-0005 WWW.EUROTECHSEATING.COM ASSEMBLY INSTRUCTIONS CHAIR NAME AND SKU OR MODEL Remove all items fom the caton. Veify all
More informationSingle Row Deep Groove Ball Bearings
Single Row eep Goove all eaings Single Row eep Goove all eaings The single ow eep goove ball beaings have elatively eep aceways on both ings without a filling slot an ae non-sepaable. High loa atings ae
More informationSafety detection solutions Safety interlock switches by actuator, with solenoid, turret head Metal, type XCS LF Plastic, type XCS LE
Pesentation by actuato, with solenoid, tuet head opeating by actuato With emegency elease mushoom head pushbutton Pages / and / Pages /6 and / opeating by actuato Pages / and / Envionment chaacteistics
More informationSUPER PRECISION BEARINGS
SUPER PRECISION BEARINGS Intoduction As technologies evolve, all manufactues shae a global esponsibility to espect and potect the envionment. NSK Motion and Contol poducts eflect ou copoate commitment
More informationGrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family
More informationORDERING INFORMATION5
ODEING INFOMATION5 21.65 [] Standard Lengths: = mm (9.84") = mm (20.08") ized = mm (21.6") 21.65 [] ized Lengths: 120mm 4.724 (2) 75mm 2.953" 45mm 1.772 (2) 40mm 1.575 35mm 1.378" 30mm 1.181 (2) 25mm 0.984
More informationCeramic&Exsev bearing series
Ceamic&Exsev beaing seies Exsev beaings fo use in a vacuum envionment Moe and moe beaings ae being used in exteme special envionments, such as in a vacuum, o in a clean, coosive, o heated place. In some
More informationT-Max Q-Cut. System with 1 cutting edge PARTING AND GROOVING. For deep parting, internal grooving and small diameter face grooving
System with 1 cutting edge For deep parting, internal grooving and small diameter face grooving Toolholder assortment There are a wide range of different toolholders for inserts options - 151.2 for deep
More informationThe contents of this catalogue are the copyright of ESE and may not be reproduced unless permission is granted.
Copyight ESE 2018 The contents of this catalogue ae the copyight of ESE and may not be epoduced unless pemission is ganted. Caes have been taken in evey aspect to ensue the coectness of the data contained
More informationBall and Roller Bearings
R Ball and Rolle Beaings CAT. NO. 222-)!/E Waanty NTN waants, to the oiginal puchase only, that the deliveed poduct which is the subject of this sale (a) will confom to dawings and specifications mutually
More informationPrecision Rolling Bearings
R Pecision Rolling Beaings CAT. No. 226-^/E C O N T E N T S Technical Data NTN PRECISION ROLLING BEARINGS Main Spindle Beaings Ball Scew Suppot Beaings NTN PRODUCTS APPENDIX 1. Classification of Pecision
More informationHard metals for precision tools
had mateial mattes Had metals fo pecision tools CERATIZIT - the paent companies Headquates and paent company in MAMER / Luxemboug Paent company in REUTTE / Austia iect sales and distibution patnes 2 Ou
More informationENGINE CONTROL (5S-FE)
ENGINE CONTOL (S-FE) SYSTEM OUTLINE THIS SYSTEM UTILIZES AN ENGINE CONTOL MODULE AND MAINTAINS OVEALL CONTOL OF THE ENGINE, TANSMISSION AND SO ON. AN OUTLINE OF THE ENGINE CONTOL IS EXPLAINED HEE.. INPUT
More informationinsert height A.250 B.337 chipbreaker corner radius Inch Metric.008 0, , , ,8 w Description EDP Code Inch Metric R L H A
Deep Grooving Insert Nomenclature hart VDG 125 008 vee-bottom deep grooving insert height.250.337 chipbreaker GOOVING groove idth Inch Metric.125 3,18.156 3,96.188 4,78.218 5,54.250 6,35.312 7,92.375 9,53
More informationSMART DAMPER. Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended Reach Milling A PRODUCT OF:
NEW! Tool Holder with Integrated Damping System for Deep Hole Finish Boring and Extended each Milling A PODUCT OF: OVEVIEW Quick and excellent damping effect tool holder. esults From Vibration With ong
More informationHCG - HORN Catalog Guide
Product line Bore Ø 217 264 S274 S223 S224 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation Type HCG - HORN Catalog Guide INTERNAL
More informationLimit Switches Matsushita Electric Works, Ltd. Matsushita Electric Works, Ltd. Limit Switches ARCT1B272E Please contact...
06 07 06 07 Please contact... ARCT1B272E 200609-1YT These mateials ae pinted on ECF pulp. These mateials ae pinted with eath-fiendly vegetable-based (soybean oil) ink. Specifications ae subject to change
More informationFirst Floor Plan - EPC105, 111 and 113 Remodel EL POMAR CENTER (EPC) Facilities Services. Scale: As Shown Date: 05/31/17 Drawn by: LCE
E:\Projects\2017 Projects\17014\Drawings\Mechanical\17014 Mechanical.dwg Facilities Services First Floor Plan - EPC105, 111 and 113 emodel EL POMA CENTE (EPC) M1 Leffingwell Consulting Engineers, Inc.
More informationCHEMICAL. TIE PLUGGER Model NETP-1 TABLE OF CONTENTS
TABL OF CONTNTS Chemical Meteing quipment...2 Resin and ISO Chemicals...3 Dispensing Valve and Gun Assembly...4 Bleeding Ai Pessue fom Cylindes...5 Heat Contolles...6 NOT: Do NOT attempt to epai heat contolles.
More informationTools for Aluminum. New Expanded Offering. ISO 9001 Certified
Tools for Aluminum New Expanded Offering www.kyocera-sgstool.com ISO 9001 Certified S-CAB HIGH PEFOMANCE END MILLS The original, symmetrical flute design features an engineered flute form that provides
More informationOPERATOR S MANUAL HWH SYSTEMS CONTROL MODULE FEATURING:
HWH COPOATION OPEATO S MANUAL HWH SYSTEMS CONTOL MODULE FEATUING: BI-AXIS Computerized Hydraulic Leveling Multiple ooms Hydraulic Step and Step Cover Dual Direction Hydraulic Storage Slide Out Auxiliary
More information1400 UG PADMOUNT TRANSFORMERS
00 UG PADMOUNT TANSFOMES //0 ~ FA Bay-O-Net Fuse Schedule for Padmount Transformers ~ HB,HB Hillside Barrier ~ UID Padmounted Equipment Identification Tags & Safety Signs ~ UT Single Phase Padmount Transformer
More informationcircular saw blades side milling cutters
edition 04 / 2018 circular saw lades side milling cutters cutting-off, sawing, milling Overview Information aout the catalogue 2 Tools 4 Circular knives 34 Special tools 36 Technical information 38 1 Grüezi
More informationTABLE OF CONTENTS FLOATING BALL VALVES 9 STANDARD 10 METAL SEATED 24 TRUNNION BALL VALVES 29 STANDARD 30 DOUBLE BLOCK AND BLEED 40 FULL WELDED 44
Ball Valves The infomation in this catalog is coect except fo eo o omission and could be changed without notice. Ref.: BALL14 TABLE OF CONTENTS FLOATING 9 STANDARD 10 METAL SEATED 4 TRUNNION 9 STANDARD
More informationGrooving and Cut-Off.
Grooving Application Guide...........................................................D2 D3 Grades and Grade Descriptions.......................................................D4 D7 A2 Cut-Off................................................................D8
More informationTYTON JOINT FITTINGS DUCTILE IRON PIPE SYSTEMS
80-750. MANUFACTURED TO AS/NZS 2280 Ductile Iron fittings for ig strengt and impact resistance Suitale for in ground or aove ground applications All fittings are supplied wit a termally onded polymeric
More informationSuper precision BearingS
Supe pecision BeaingS SUPER PRECISION BEARINGS Pat1 Contents Pat1. NSK Supe Pecision Beaings Global Suppot Capabilities P6 Development Capabilities P8 Quality Contol and Poduction Capabilities P 4 5 Global
More informationPANEL SPLICE SEE DETAIL A1.3 FLOATING TRIM SEE DETAIL A1.7 TRIM NOT SHOWN FOR CLARITY
V-7 CAIE 4" MODULE OPTIONAL FLUSH CLOSUE OPTIONAL ECESSED CLOSUE 21 32 " 3 11 32 " 1 1 8 " 5 8 " 1 29 32 " 12 GA HANGE WIE, BY OTHES, NOT BY HUNTE DOUGLAS SEE DETAIL A1.2 TYPICAL SECTION SUSPENSION EQUIEMENTS
More informationX-life High-Speed Spindle Bearings M. High-performance series for maximum productivity and low operating costs
X-life High-Spee Spinle eaings M High-pefomance seies fo maximum pouctivity an low opeating costs High-pefomance seies fo maximum pouctivity X-life High-Spee Spinle eaings M Tool spinles an, in paticula,
More informationA New T-BURST Holder for Swiss Turning Applications
1/15 A New T-BURST Holder or Swiss Turning Applications 2/15 KEY POINT TaeguTec is pleased to introduce a new addition to te T-BURST ig pressure coolant older or swiss turning applications. Te T-BURST
More informationArtisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
Looking fo moe infomation? Visit us on the we at http://www.atisan-scientific.com fo moe infomation: Pice Quotations Dives Technical Specifications. Manuals and Documentation Atisan Scientific is You~
More information...vibration isolation. Miscellaneous Parts
...vibration isolation Parts Anti-vibration Mounts engine l P2040 Rubber on silver zinc plated steel. Tecnical Notes Wit a bell-like base tis unit is suitable for supporting most applications, suc as engine
More informationCYLINDRICAL ROLLER BEARINGS
g z x h RU RN RJ cylinical olle beaing catalog Timken cylinical olle beaing catalog R YLINRIAL ROLLER EARING ATALOG Inex Timken Oveview......................................... 2 Shelf Life Policy...6
More informationSTAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS
STAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS #CSM- AND #CSM- CHOIR STICK MICROPHONES The CSM- and CSM- Choi Stick Micophones Stick micophone mounts on any standad mi- offe the ultimate pefomance of an
More informationFlexible hose solutions
Aeoquip Hose Assembly Maste Catalog Flexible hose solutions Ai conditioning and efigeation hose hose GH001.... -3 GH134.... -4 FC802... -4 FC800... -5 FC555... -6 AROQUIP MASTR CATALOG A-HOOV-MC001-3
More information5050 Introducing the 5050 milling grade taking toughness to new heights.
Intoducing the milling gade taking toughne to new height. UNIVERSA MIING GRADE FOR TOUGH APPICATIONS PRODUCTIVE. REIABE. VERSATIE. MAKE US PROVE IT. Tough condition? Multiple mateial? Want pedictable pefomance?
More informationAccessories for Safety Switches
ccessoies fo Safety Switches s fo safety switches NZ.VZ, NZ.VZ.VS and TZ Two stainless safety s pe actuato Inceased ovetavel optional 25 pieces optional Z-G staight Ovetavel 4 mm Z-GME staight Ovetavel
More informationTHE TCCS SYSTEM UTILIZES A MICROCOMPUTER AND MAINTAINS OVERALL CONTROL OF THE E/G, T/M, ETC. AN OUTLINE OF ENGINE CONTROL IS GIVEN HERE.
SSTEM OUTLINE THE TCCS SSTEM UTILIZES A MICOCOMPUTE AND MAINTAINS OVEALL CONTOL OF THE E/G, T/M, ETC. AN OUTLINE OF ENGINE CONTOL IS GIVEN HEE.. INPUT SIGNALS () ATE TEMP. SIGNAL SSTEM THE ATE TEMP. SENSO
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationLED GLS-lamp Replacement and Special Shapes
LED Lamps 18/19 1 LED GLS-lamp Replacement and Special Sapes 2 Comfortable ligt wit Radium LED Lamps Range of applications Classic Design Simple 1:1 excange Low energy consumption Long service life Ligt
More informationMAE 412 Machines and Mechanisms 2: Catapult Project 12/13/02
MAE 1 Machines and Mechanisms : Catapult Poject 1/1/0 Michael Kuczewski Nicholas Laatta Jonathan Leahy Nicholas Leone Kuan Kiong Lim William Louisos Atuo Machuca Jeemy Malik Intoduction: The goup s task
More informationInch Series TAPERED ROLLER BEARINGS
Inch Seies APERED ROLLER EARINGS Inch Seies APERED ROLLER EARINGS Publication of New Inch seies apeed Rolle eaing Catalog Allow us to expess ou heatfelt appeciation fo you valuable patonage. At this time
More informationC-Lube Linear Roller Way Super MX Linear Roller Way Super X
-Lube Linear Roller ay uper Linear Roller ay uper X 14 148 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation Te specification of and series are identified
More informationNSK Linear Guides. HA Series for Machine Tools
NS inear Guides A Series for Macine ools Premier motion accuracy and rigidity innovative linear guide design, compatible wit ig precision macine tools Patent Pending Unparalleled motion accuracy, rigidity,
More informationTechnical Information. Deep Groove Ball Brgs. Angular Contact Ball Brgs. Cylindrical Roller Brgs. Full-Complement Cylindrical Roller Brgs.
Technical Infomation Page No. A7 Tech. Info. Deep Goove all gs. 4 Angula Contact all gs. 20 Cylindical Rolle gs. 44 Full-Complement Cylindical Rolle gs. 78 Tapeed Rolle gs. 96 Spheical Rolle gs. 286 Thust
More information