THE COMPLETE GROOVING SYSTEM. Part 2. Two cutting edge inserts in the width range mm. Toolholders for OD and ID machining
|
|
- Violet Davidson
- 5 years ago
- Views:
Transcription
1 olid carbide coated wit PVD and CVD layer PCD MCD CBN THE COMPETE GROOVING SYSTEM Part 2 Two cutting edge inert in te widt range mm Toololder for OD and ID macining Toololder for radial and axial grooving Holder dimenion 12 up to 32 mm quare and 12 up to 40 mm round Inert type in
2 p Toololder - radial grooving and groove turning 1 b Article-No. Dimenion Inert 1 2 b p 1 2 MD-AXBR/ MD 22N 2.00S-0.20-T MD-AXBR/ MD 22N 2.50S-0.20-T MD-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-AXBR/ MD 22N 2.00S-0.20-T MD-AXBR/ MD 22N 2.50S-0.20-T MD-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-AXBR/ MD 22N 2.00S-0.20-T MD-AXBR/ MD 22N 2.50S-0.20-T MD-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-AXBR/ MD 24N 5.00S-0.40-T MD-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R MD-AXBR/ MD 22N 2.00S-0.20-T MD-AXBR/ MD 22N 2.50S-0.20-T MD-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-AXBR/ MD 24N 5.00S-0.40-T MD-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R MD-AXBR/ MD 24N 5.00S-0.40-T MD-AXBR/ MD 24 N6.00S-0.40-T MD 24N 6.00S-3.00-R 1 b Article-No. Dimenion Inert 1 2 b Dmax 1 2 MD-S-AXBR/ MD 22N 2.00S-0.20-T MD-S-AXBR/ MD 22N 2.50S-0.20-T MD-S-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R
3 Toololder - radial grooving and groove turning 1 b Article-No. Dimenion Inert 1 2 b Dmax 1 2 MD-S-AXBR/ MD 22N 2.00S-0.20-T MD-S-AXBR/ MD 22N 2.50S-0.20-T MD-S-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-S-AXBR/ MD 22N 2.00S-0.20-T MD-S-AXBR/ MD 22N 2.50S-0.20-T MD-S-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-S-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-S-AXBR/ MD 24N 5.00S-0.40-T MD-S-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R MD-S-AXBR/ MD 22N 2.00S-0.20-T MD-S-AXBR/ MD 22N 2.50S-0.20-T MD-S-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-S-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-S-AXBR/ MD 24N 5.00S-0.40-T MD-S-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R MD-S-AXBR/ MD 24N 5.00S-0.40-T MD-S-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R Toololder - radial grooving 1 b 1 Article-No. Dimenion Inert D 1 2 b 1 2 MD-T-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-T-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-T-AXBR/ MD 24N 5.00S-0.40-T MD-T-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R MD-T-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-T-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-T-AXBR/ MD 24N 5.00S-0.40-T 2 MD-T-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R 2
4 Toololder - releave grooving 1 f b Article-No. Dimenion Inert b f 1 MD-P-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-P-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-P-AXBR/ MD 24N 5.00S-0.40-T MD-P-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R MD-P-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-P-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-P-AXBR/ MD 24N 5.00S-0.40-T MD-P-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R MD-P-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-P-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-P-AXBR/ MD 24N 5.00S-0.40-T MD-P-AXBR/ MD 24N 6.00S-0.40-T MD 24N 6.00S-3.00-R Toololder - axial groove turning p b 1 1 Article-No. Dimenion Inert 1 b Dmin/max p 1 MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24 N4.00S-2.00-R
5 Toololder - axial groove turning p b 1 1 Article-No. Dimenion inert 1 b Dmin/max p 1 MD-R-AXBR/ MD 24N 5.00S-0.40-T MD-R-AXBR/ MD 24N 5.00S-0.40-T MD-R-AXBR/ MD 24N 5.00S-0.40-T MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R-AXBR/ MD 24N 5.00S-0.40-T MD-R-AXBR/ MD 24N 5.00S-0.40-T MD-R-AXBR/ MD 24N 5.00S-0.40-T MD-R-AXBR/ MD 24N 5.00S-0.40-T MD-R-AXBR/ MD 24N 5.00S-0.40-T MD-R-AXBR/ MD 24N 5.00S-0.40-T Toololder - axial groove turning 1 b 1 p Article-No. dimenion Inert 1 b Dmin/max p 1 MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R
6 Toololder - axial groove turning 1 b 1 p Article-No. Dimenion Inert 1 b Dmin/max p 1 MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 24N 5.00S-0.40-T MD-R90-AXBR/ MD 24N 5.00S-0.40-T
7 Boring bar radial grooving and groove turning f p d b 1 Article-No. Dimenion Inert Dmin d b f p 1 MD-IXBR/ M 10N 2.00S-0.20-T MD-IXBR/ M 10N 3.00S-0.30-T MD 10N 3.00S-1.50-R MD-IXBR/ M 10N 2.00S-0.20-T MD-IXBR/ M 10N 3.00S-0.30-T MD 10N 3.00S-1.50-R MD-IXBR/ M 10N 2.00S-0.20-T MD-IXBR/ M 10N 2.50S-0.20-T MD-IXBR/ M 10N 3.00S-0.30-T MD 10N 3.00S-1.50-R MD-IXBR/ MD 22N 2.00S-0.20-T MD-IXBR/ MD 22N 2.50S-0.20-T MD-IXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-IXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-IXBR/ MD 22N 3.00S-0.30-T MD 22N 3.00S-1.50-R MD-IXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-IXBR/ MD 24N 5.00S-0.40-T MD-IXBR/ MD 24N 4.00S-0.40-T MD 24N 4.00S-2.00-R MD-IXBR/ MD 24N 5.00S-0.40-T MD-IXBR/ MD 24N 6.00S-0.40-T M 24N 6.00S-3.00-R Inert olid carbide coated Article-No. Dimenion Cutting grade Code engt Widt Radiu Ap.max fn.max KTE20 [PVD] PTV28 [PVD] PTT28 [CVD] M 10N 2.00S-0.20-T O O O M 10N 2.50S-0.20-T O O O M 10N 3.00S-0.30-T O O O MD 22N 2.00S-0.20-T O O O MD 22N 2.50S-0.20-T O O O MD 22N 3.00S-0.30-T O O O MD 24N 4.00S-0.40-T O O O MD 24N 5.00S-0.40-T O O O MD 24N 6.00S-0.40-T O O O M 10N 3.00S-1.50-R O O O MD 22N 3.00S-1.50-R O O O MD 24N 4.00S-2.00-R O O O MD 24N 6.00S-3.00-R O O O
8 Inert tipped tooling for turn, mill, drill and boring operation Tap, die and tread milling tool Adapter Mini Tool for Swi macine Special tool according to cutomer pecification
9 Gro EU-Pricelit 2013 Article number /St. Article number /St. Article number /St. Article number /St. MD-AXBR/ MD-T-AXBR/ MD-R-AXBR/ MD-IXBR/ MD-AXBR/ MD-T-AXBR/ MD-R-AXBR/ MD-IXBR/ MD-AXBR/ MD-T-AXBR/ MD-R-AXBR/ MD-IXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-S-AXBR/ MD-T-AXBR/ MD-T-AXBR/ MD-T-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-P-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-R90-AXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ MD-IXBR/ M 10N 2.00S-0.20-T KTE20/PTV28/PTT M 10N 2.50S-0.20-T KTE20/PTV28/PTT M 10N 3.00S-0.30-T KE20/PTV28/PTT MD 22N 2.00S-0.20-T KTE20/PTV28/PTT MD 22N 2.50S-0.20-T KTE20/PTV28/PTT MD 22N 3.00S-0.30-T KTE20/PTV28/PTT MD 24N 4.00S-0.40-T KTE20/PTV28/PTT MD 24N 5.00S-0.40-T KTE20/PTV28/PTT MD 24N 6.00S-0.40-T KTE20/PTV28/PTT M 10N 3.00S-1.50-R KTE20/PTV28/PTT MD 22N 3.00S-1.50-R KTE20/PTV28/PTT MD 24N 4.00S-2.00-R KTE20/PTV28/PTT MD 24N 6.00S-3.00-R KTE20/PTV28/PTT MD-T-AXBR/ MD-R-AXBR/ MD-R90-AXBR/ MD-T-AXBR/ MD-R-AXBR/ MD-IXBR/
10 Data advanced cutting material Wear reitance Tougne Grade PCD-DPF PCD-DPG Decription Polycritaline diamond wit carbide bae, fine grain, carp cutting edge and low cutting force at tigt tolerance. Hig wear reitance and tougne. Polycritaline diamond wit carbide bae, core grain, carp cutting edge and low cutting force at tigt tolerance. Hig wear reitance and tougne. Workpiece material and feature Finiing of all NF metal and NF workpiece material wit a mall content on abraive particle. Rouging, finiing and milling of all ig abraive NF metal and NF workpiece material. PCD-DPU CBN-BHF -BHT CBN-BF -BT MCD-MD Polycritaline diamond wit carbide bae, micro grain, carp cutting edge and very low cutting force at tigt tolerance. Excellent wear reitance and tougne. Solide polycritaline CBN grade wit ig CBN content, middle grain ize, ig wear reitance, warm ardne, preure reitance and tougne of all CBN grade for macining cat iron, ard cating, Ni-Hard and intered teel. BHF = carp cutting edge BHT = T land on cutting edge Solide polycritaline CBN grade wit low CBN content. Micro grain, very ig wear reitance, preure reitance and tougne. BF = carp cutting edge BT = T land on cutting edge Solide monocritaline diamond witout tructure. Abolute carp cutting edge witout crack, terefore almot no cutting force [burr free] and garanteed tigt tolerance. Abolute wear reitance and iget eat conduct, low tougne. Fine finiing and milling of all NF metal and NF workpiece material wit a very mall content on abraive particle. Roug finiing from intered teel, cat iron, ard cating, Ni-Hard and uper alloy. Hard macining, dry and wit coolant emulion. Hig feed rate and mall D.O.C. during moot cutting and middle interrupted cut. Ultra fine finiing of all NF metal and NF workpiece material witout abraive particle.
11 Data advanced cutting material Tool wit tailer made inert Standard inert Article number /St. M 10N 2.00S-0.20-T BHF M 10N 2.00S-0.20-T BHT M 10N 2.00S-0.20-T BF M 10N 2.00S-0.20-T BT M 10N 2.00S-0.20-T DM M 10N 2.00S-0.20-T DPF M 10N 2.50S-0.20-T BHF M 10N 2.50S-0.20-T BHT M 10N 2.50S-0.20-T BF M 10N 2.50S-0.20-T BT M 10N 2.50S-0.20-T DM M 10N 2.50S-0.20-T DPF M 10N 3.00S-0.30-T BHF M 10N 3.00S-0.30-T BHT M 10N 3.00S-0.30-T BF M 10N 3.00S-0.30-T BT M 10N 3.00S-0.30-T DM M 10N 3.00S-0.30-T DPF Article number /St. Article number /St. MD 22N 2.00S-0.20-T M 10N 3.00S-1.50-R BHF BHF/BHT/BF/BT M 10N 3.00S-1.50-R BHT DM M 10N 3.00S-1.50-R BF DPF M 10N 3.00S-1.50-R BT MD 22N 2.50S-0.20-T M 10N 3.00S-1.50-R DM BHF/BHT/BF/BT M 10N 3.00S-1.50-R DPF DM DPF MD 22N 3.00S-0.30-T BHF/BHT/BF/BT DM DPF MD 24N 4.00S-0.40-T BHF/BHT/BF/BHT DM DPF MD 24N 5.00S-0.40-T BHF/BHT/BF/BT DM DPF MD 24N 6.00S-0.40-T BHF/BHT/BF/BT DM DPF Article number /St. MD 22N 3.00S-1.50-R BHF/BHT/BF/BT DM DPF MD 24N 4.00S-2.00-R BHF/BHT/BF/BHT DM DPF MD 24N 6.00S-3.00-R BHF/BHT/BF/BT DM DPF
12 Workpiece material group Workpiece material, grade and cutting parameter Cutting peed Vc in m / min Workpiece material group P Un-alloyed teel Alloyed teel and teel cating Hig alloyed teel Workpiece material group M Ferritic/Martenitic Autenitic Workpiece material group K Grey cat iron Hard cating Sintered teel Workpiece material group N Wrougt material NF Metal, low Si content NF Metal, ig Si content Fiber re-enforced yntetic Compoite Workpiece material group S Titanium baed alloy Cobalt baed alloy Workpiece material group H Hardened tool teel Sintered carbide Green carbide Green ceramic Workpiece material group P Un-alloyed teel Alloyed teel and teel cating Hig alloyed teel Workpiece material group M Ferritic/Martenitic Autenitic Workpiece material group K Grey cat iron Hard cating Sintered teel Workpiece material group N Wrougt material NF Metal, low Si content NF Metal, ig Si content Fiber re-enforced yntetic Compoite Workpiece material group S Titanium baed alloy Cobalt baed alloy Workpiece material group H Hardened tool teel Sintered carbide Green carbide Green ceramic Advanced cutting material KTE20 PTV28 PTT28 PKD-DPF MKD-DM CBN-BHF CBN-BHT CBN-BF CBN-BT Feed rate fn in mm / U and grooving widt
SR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationCERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
More informationDRILLS CARBIDE. Drills Carbide When productivity matters - 3xd 1
Drills Carbide When productivity matters - 3xd 1 to 12xd 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings DRILL CARBIDE Drills
More informationNew High Pressure Coolant Capable Groove-Turning and Parting Tools
1/10 New Hig Pressure Coolant Capable Groove-Turning and Parting Tools 2/10 In order to meet te macining needs of difficult-to-cut materials suc as titanium, inconel and oter eat resistant alloys, TaeguTec
More informationGrooving and Cut-Off.
Grooving Application Guide...........................................................D2 D3 Grades and Grade Descriptions.......................................................D4 D7 A2 Cut-Off................................................................D8
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationSEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationGrooving and Cut-Off.
Grooving Application Guide...........................................................D2 D3 Grades and Grade Descriptions.......................................................D4 D7 A2 Cut-Off................................................................D8
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationDrilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
More informationGrooving / Cut-Off. Threading Tools F63
/ / 1 42 Triangular hallow Inserts (or External and Internal Grooves) External ace Internal Hardened teel Expanded Expanded Expanded EC- election Guide...2 GWC Type (or hallow Grooves)... 4 GWC Type (or
More informationISCAR s Innovative Clamping System for Rough Turning
TURNING JANUARY Page 1 / 19 ISCAR s Innovative Clamping System or Roug Turning JANUARY Page 2 / 19 Higligts ISCAR as developed an innovative dovetail pocket combined wit a lever clamping mecanism. Te new
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationVG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
More informationHIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH
IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG
More information-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
More informationStandard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.
Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationPRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More information1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
More informationMilling Tools Milling Tools
HSS-keyway milling cutters -finishing cutters -roughing cutters -radius milling cutters Solid carbide -universal end milling cutters - end milling cutters RockTec 52 and 65 - ALU end milling cutters -
More informationChipbreaker Geometry Negative...F2 F3. Chipbreaker Geometry Positive...F3. Grades and Grade Descriptions...F4. Speed and Feed Chart...
WIDIA Value Chipbreaker Geometry egative....................................................................f2 F3 Chipbreaker Geometry ositive.......................................................................f3
More informationNSK Linear Guides. HA Series for Machine Tools
NS inear Guides A Series for Macine ools Premier motion accuracy and rigidity innovative linear guide design, compatible wit ig precision macine tools Patent Pending Unparalleled motion accuracy, rigidity,
More informationGrooving, Cut-Off, and Turning
Grooving, Cut-Off, and Turning Grooving Application Guide..........................................................................D2 D3 WMT Grooving, Cut-Off, and Turning................................................................D4
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 437 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut 16 Spring plate 12 Spindle 54 Spring Axial needle 69 beering
More informationPCD REAMER. Content PCD Reamers Catalogue. Overview PCD Reamer Production Performance Quality Control Sundi Standard
PCD REAMER 2015-2016 PCD Reamers Catalogue Content Email: info@sudicuttingtools.com Tel: 0086-0510-88207357 Fax:0086-0510-88207362 Overview PCD Reamer Production Performance Quality Control Sundi Standard
More informationReamers. - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAER Reamers - and - achine (orse Taper & Chucking) - Bridge - Taper in - orse Taper ocket - Taper ipe - Adjustable AVAILABLE I ULTILE LAGUAGE L00 VE L00 VL L00 VFR L00 VDE L00 VIT L00 VE L00 VE Engineers
More informationCarbide Burs - Double Cut - Aluminium Cut - Comprehensive range of shapes to suit your application - Standard & extra length available - Sets &
CARBIDE BUR Carbide Burs - - Aluminium Cut - Comprehensive range of shapes to suit your application - tandard & extra length available - ets & merchandisers Carbide Burs Finder IO VDI aterial Group utton
More informationPCD REAMER PCD Reamers Catalogue. Wuxi Sundi Precision Tools Co.,Ltd. Content. Tel:
PCD REAMER 2016-2017 PCD Reamers Catalogue Email: info@sudicuttingtools.com Overview PCD Reamer Production Performance Content E1 E2 E3-E5 E5 E Tel: 0086-0510-88207357 Fax:0086-0510-88207362 Quality Control
More informationSAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationNew Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationDrilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
More informationMetallic trip Standard thickne of the metallic trip i 0.2 mm (0.18). MATERIALS FOR METALLIC STRIP ASTM DIN Material No. AISI AISI 316, 316
MS 10 PROPERTIES AND APPLICATION Spiral wound gaket are pecial emi-metallic gaket of great reilience, there fore they are very uitable for application featuring heavy operating condition. Spiral wound
More informationHolemaking ADVANCES 2017 Inch
Holemaking ADVANCES 2017 Inch Holemaking Introduction... Q1 Q8 Solid Carbide Drills... R1 R139 Modular Drills...S1 S51 Indexable Drills... T1 T60 Hole Finishing... U1 U95 Q1 Holemaking Made Easy and Economical
More informationHOW TO READ THE STANDARD OF CBN&PCD TURNING INSERTS
OW TO AD TE TANDARD OF &PCD TURNING INERT a ow this section page is organized z Organized according to turning insert shape. (Refer to the index on the next page.) x Inserts are arranged in order of :
More information...vibration isolation. Miscellaneous Parts
...vibration isolation Parts Anti-vibration Mounts engine l P2040 Rubber on silver zinc plated steel. Tecnical Notes Wit a bell-like base tis unit is suitable for supporting most applications, suc as engine
More informationKBN05M. Wide Range of Applications. New Technology. 1st Choice. for hardened steel cutting. to achieve superior wear and fracture resistance
M E G A C O A T C B N Wide Range of Applications for hardened steel cutting New Technology to achieve superior wear and fracture resistance 1st Choice for carburizing hardened material NEW Technology to
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationKGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationUnderground ball valves JIP for pre-insulation
Data heet Decription Danfo JIP underground ball valve are deigned for ditrict heating ytem and other cloed loop water ytem where the water i treated to avoid internal corroion. aving a fully welded body,
More informationPCD & CBN TANGENTIAL MILLING
& TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationCut-Off Tools. SumiGrip Jr. SumiGrip. SEC-Small Diameter Cut-off Tools SEC-Grooving / Cut-Off Tools
Tools 33 to 46 Tools Tools SumiGrip Jr. SumiGrip SEC-Small Diameter Cut-off Tools SEC- / Tools SEC- Tool Series Selection Guide 34 Introduction of SumiGrip 35 STH Type 36 STS Type 37 WCH Type 38 WCS Type
More informationEDGE PCD. Indexable Inserts. Issue 11
Issue 11 EDGE PCD Indexable Inserts EDGE PCD inserts are widely used to machine practically all non-ferrous metals, ranging from soft aluminum through cemented tungsten carbide. They are also used to machine
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationMachining modern composite materials
GÜHING HIGH-PEFOMANCE TOOLS FO MACHINING FIBE COMPOSITE MATEIALS without fraying of fibres and delamination for optimal component surface finish quality Machining modern composite materials GÜHIN GUHING
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationTAC J-Series Turning Toolholder for Small Lathes
AC J-Series urning oololder or Small Lates Selection Guides o J-series... 266 Speciications For General urning... 271 For Front & everse urning and Parting... 276 For Back urning... 277 For Grooving and
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More information3-01 INTERNAL GRINDING
3-01 INTERNAL GRINDING 9.3.2016 3-02 INTERNAL GRINDING Type Sketch Details Stock Page INFORMATION Diameter, rigidity of the shank, grinding stroke, special executions 3-04 As small as a proboscis of a
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationStandard product line MEGA-Speed-Drill. MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron. The tool specialists for the trade.
The tool specialists for the trade. Standard product line MEGA-Speed-Drill Available immediately as 5xD version : MEGA-Speed-Drill-Inox MEGA-Speed-Drill-Iron The tool specialists for the trade. MILLER
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationand 2013 Beyond Inserts
INNOVATIONS Innovations MASTER Master Catalogue CATALOGUE A4 CUTTING Tooling TOOLS and 2013 Beyond Inserts 2013 A4 Tooling and Beyond Inserts for All Your O.D. and I.D. Applications Primary Application
More informationThread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
More informationCONTENTS Adaptors Technical Information Brazed Cutters Cutting Parameters Services 62
CONTENTS 4-19 20-35 Adaptors Technical Information Brazed Cutters Cutting Parameters 36-41 42-53 54-59 60-61 Services 62 Modern machining operations need to rely on the optimization of the production processes:
More informationActuating Tools. MAPAL Competence Actuating Tools and Facing Heads
Actuating Tools MAPAL Competence Actuating Tools and Facing Heads The MAPAL ISOTOOL Competence Center in Sinsheim The MAPAL group develops, produces and markets high quality precision tools worldwide
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationYV Series. You Ji Machine Industrial Company Limited. CNC Vertical Turning Center. You Ji Machine Industrial Company Limited.
You Ji Machine Industrial ompany imited No.92, Huanqiu Rd., Zhuyuan Vil., uzhu ist., Kaohsiung ity 82142, Taiwan Tel: 886-7-69-2669 Fax: 886-7-69-331 Email youji@ms1.hinet.net istributor N.K. YV-16-319
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationHOLLFELDER CUTTING TOOLS. Special tooling for customer applications
HOLLFELDER CUTTING TOOLS Special tooling for customer applications HOLLFELDER-GÜHRING CUTTING TOOLS Your competent partner in the area of metal chip removal. At our two company locations in Nuremberg und
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationReaming and Fine Boring
Reaming and Fine Boring MAPAL Competence Reaming and Fine Boring Tool with guide pads Fixed reamers Competence Reaming and Fine Boring Today reaming and fine boring are the most widely used methods for
More information8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
More informationFine Pitch Cobalt Roughers
ISO 01:08 Fine Pitch Cobalt Roughers Izar - HSCO 8% - M2 -Bright Finish DIN 8 NR-F - ISO 1-30º Helix - Fine Multi-Flute Square End Reg. Length-Roughers 13 7-17 8 19 9-23 22 72-29 2-1 2 - -8-1 38-1 -237
More informationHCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
More informationCera-Notch Grooving and Threading System
Cera-Notch Grooving and Threading System Grooving Threading Face Grooving FC Program Inside Deep Grooving Grooving with Cermets Characteristics: Offer better surface finishes on carbon and alloy steel
More informationTurning Tools Catalogue. Special Tools
Turning Tools Catalogue Special Tools Special Tools 2 11 15 Multi3 Cut Multi3 Cut F External radial holder 2 Multi3 Cut F External axial holder 3 Blanks for Multi3 Cut F 4 Multi3 Cut External radial holder
More informationProduct Catalogue 835. Smart Solutions on the Cutting Edge
Product Catalogue 835 Smart Solutions on the Cutting Edge 1 2 The World of WhizCut Smart Solutions on the Cutting Edge Demand on production for small parts around the world is continuously increasing.
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationThe technologically minded. Automotive. industry. Technologies, solutions for automotive industry
The technologically minded Automotive industry Technologies, S olid c arbide ttools, ools, P KD and HSS Solid carbide PKD solutions for automotive industry 2 3 oo ver the last 50 years Diager Industrie
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More information