GROUPCODE NEN : ANSI : STEEL BS : STEEL
|
|
|
- Sophia French
- 5 years ago
- Views:
Transcription
1 RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : s 0,8 0, ring d3 8, 9,8 10,8 11, ,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6 15, groove m (H13) 0,9 0,9 1,1 1,1 1,1 1,1 1,1 1,1 n (min.) 0,6 0,6 0,6 0,6 0,8 0,9 0,9 1, s ring d3 1,3 18,3 19,5 0,5 1,5,5 3,5 d4 8 8,8 9,4 10,4 11, 1, 13, d 16,8 1, groove m (H13) 1,1 1,1 1,1 1,1 1,1 1,1 1,1 n (min.) 1, 1, 1,5 1,5 1,5 1,5 1,5 8MM MM MM MM MM MM MM MM MM MM MM 19MM MM 1MM MM MM MM MM MM MM MM MM MM MM 0MM MM MM ➂ Spring steel, acc. to DIN
2 RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 3➃ ➃ 8 9➃ ➃ s 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, ring d3 4,6 5,9 6,9,9 9,1 30,1 31,1 3,1 33,4 34,4 35,5 d4 15,4 14,8 15,5 16,1 18, 1,9 19,6 19,9 0 0,6, d 4,1 5, 6,, 8,4 9,4 30,4 31,4 3, 33, 34, groove m (H13) 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3 n (min.) 1, 1,8 1,8 1,8,1,1,1,1,6,6, ➃ 40 41➃ 4 43➃ s 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 1,5 ring d3 36,5 3,8 38,8 39,8 40,8 4 43,5 44,5 45,5 46,5 d4,6 3,6 4,6 5,4 6,4 8,6,8 9 9,6 d 35, ,5 43,5 44,5 45,5 groove m (H13) 1,6 1,6 1,6 1,6 1,6 1,6 1,85 1,85 1,85 1,85 n (min.), ,8 3,8 3,8 3,8 3MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM 30MM MM MM MM 4MM ➂ Spring steel, acc. to DIN
3 RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : ➃ 45 46➃ ➃ s 1,5 1,5 1,5 1,5 1,5 ring d3 4,5 48,5 49,5 50,5 51,5 54, 56, 5, 58, 59, 60, d ,6 33,5 34,5 36,3 3, , 41, d 46,5 4,5 48,5 49,5 50, groove m (H13) 1,85 1,85 1,85 1,85 1,85,15,15,15,15,15,15 n (min.) 3,8 3,8 3,8 3,8 3,8 4,5 4,5 4,5 4,5 4,5 4,5 5➃ ➃ 65 6➃ 68 0 s,5,5,5,5 ring d3 61, 6, 64, 66, 6, 68, 69, 1,5,5 4,5 d ,5 44, 46, 4, 48, ,6 53,6 d groove m (H13),15,15,15,15,15,65,65,65,65,65 n (min.) 4,5 4,5 4,5 4,5 4,5 4,5 4,5 4,5 4,5 4,5 44MM MM MM MM MM MM MM MM MM MM MM MM MM 60MM MM MM MM MM MM MM MM MM MM MM MM ➂ Spring steel, acc. to DIN
4 RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : ➃ ➃ ➃ s,5,5,5,5,5, ring d3 6,5 9,5 81,5 8,5 85,5 8,5 90,5 9,5 93,5 95,5 9,5,5 10,5 d4 55,6 58,6 6 60,1 6,1 64,1 66,9 69,8 69,9 1,9 3,3 6,5 9,4 d ,5 85,5 88,5 90,5 91,5 93,5 95,5 98,5,5 groove m (H13),65,65,65,65,65,65 3,15 3,15 3,15 3,15 3,15 3,15 3,15 n (min.) 4,5 4,5 4,5 4,5 5,3 5,3 5,3 5,3 5,3 5,3 5,3 5,3 5, ➃ s ring d3 103,5 105, d4 9 80, , ,9 101,9 106,9 d 101,5 103, groove m (H13) 3,15 3,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 n (min.) 5,3 5, MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM ➂ Spring steel, acc. to DIN
5 RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : ➃ ➃ s ring d ,5 19,5 181,5 184,5 189,5 194,5 19,5 d4 111,5 116, ,8 19,8 13, 13, 141,6 146,6 150, 155, d groove m (H13) 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 4,15 n (min.) 6 6 6,5,5,5,5,5,5,5,5,5, ➃ ➃ s ring d3 199,5 04,5 09, d4 160, 165, 10, 180, 190, 00, 10, 0, d groove m (H13) 4,15 4,15 4,15 5,15 5,15 5,15 5,15 5,15 5,15 5,15 5,15 5,15 5,15 5,15 n (min.),5,5, MM MM MM MM MM MM MM MM MM MM MM MM MM MM 195MM MM 10MM MM MM MM MM MM MM MM MM MM MM ➂ Spring steel, acc. to DIN
Technical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
Profile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
Retaining ring for shaft - normal type
Retaining ring for shaft - normal type DIN 41 NF E22-163 BS 363-4 Technical data Nom.size shaft d1 Ring s Ring d 3 Ring d 4 Groove d 2 Groove m (H13) Groove n (min.) 3 0,4 2, 2,8 0,5 0,3 4 0,4 3, 8,6 3,8
ground cones Ground Sockets screw thread tubes spehrical joints stoppers tubing connectors universal connectors interchangeable GLASSWARE
ground cones Ground Sockets screw thread tubes spehrical joints stoppers tubing connectors universal connectors interchangeable GLASSWARE 2 Cones 1001 Acc. to DIN 12249 form B and in addition to standard,
CHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
GTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
Steering Cylinders. Remove Steering Cylinders. Disassembly and Assembly 920 & 930 WHEEL LOADER VEHICLE SYSTEMS
Disassembly and Assembly 920 & 930 WHEEL LOADER VEHICLE SYSTEMS Steering Cylinders Remove Steering Cylinders 1. Turn the machine all of the way to the left to remove the right steering cylinder. Turn the
HSS-Drills. HSS-DrillS
-Dris -DriS Center dris Cutting direction Too materia Standard Diameter range (mm) Cataog no. Discount group Standard range, page Center dris without fat DIN 333 0,500-12,500 71600 132 367 eft-hand DIN
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT
Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT Application Tight closing, double eccentric butterfly valve for process engineering and plants with industrial requirements Nominal size DN 80 to DN 400
DIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
Center drills. Center drills without flat din 333. Center drills without flat din 333. Catalogue no. Catalogue no. Tool material
Center dris Center dris without fat din 333 Cataogue 71600 Standard dri for producing centre hoes acc. to din 332, Sheet 1, form a (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony
HTM Circulation Pumps acc. to DIN EN 733 Type NKLs
HTM Circulation Pumps acc. to DIN EN 733 Type NKLs General The DICKOW standard HTM pumps, series NKLs according to EN 733, are designed as centrifugal pumps of light duty for handling heat transfer media.
Maxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R
Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25
Taper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
Wheels and castors with pneumatic tyres
Wheels and castors with pneumatic tyres 190 we innovate mobility www.blickle.com Table of Contents P L LS Series Load capacity Page P 180-490 mm 50-525 kg 192/193 194 L-P 200-20 mm 75-250 kg LS-P 400-415
Maxifluss Rotary Plug Valves VETEC Types 73.3/M and 73.7/M
Maxifluss Rotary Plug Valves VETEC Types 7./M and 7.7/M Application Double-eccentric control valve for process engineering, industrial applications, and refineries Nominal sizes DN 25 to 400 1 to 16 Nominal
Rear Axle Hub, Bearing, Cup, and/or Seal Replacement
Page 1 of 11 Rear Axle Hub, Bearing, Cup, and/or Seal Replacement Special Tools J 8092 Universal Driver Handle - 3/4 inch - 10 J 2222-C Wheel Bearing Nut Wrench J 24426 Wheel Bearing Race Installer - Outer
Low Pressure Series UF
Low Pressure Couplings with various fitting shapes Due to differently shaped guide components (triangular, square, round) of coupling and adaptor only coupling halves with the same fitting may be connected.
Order No light grey. Order No black
DPP- Plastic dome plug Body: Polyamide (V2 acc. to UL94) Sealing: Neopren Dynamic: -20 ~+80, short term:100 _ Easy and quick assembly Color: RAL7001 silver grey RAL7035 light grey RAL9005 black Blue, Red
Peter Meyer Ball valves Cryogenic
Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing
Journal Bearings. Types W131, W133, W134, W135, W136 and W137 Diameter Range mm
Journal Bearings Types W131, W133, W134, W135, W136 and W137 Diameter Range 90...710 mm Bearings type W131, W133, W134, W135, W136 and W137 are general purpose journal bearings with or without thrust capability
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
Drain ball valve BR 21a
PTFE - lined Drain ball valve BR 21a Application: Tight-closing PTFE-lined drain ball valve for corrosive media, especially for high process demand in chemical plants: Nominal sizes DN 50 to DN 150 Nominal
HCG - HORN Catalog Guide
Product line Bore Ø 217 264 S274 S223 S224 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation Type HCG - HORN Catalog Guide INTERNAL
0513 Sinus rules V-blocks (pair) DIN. Specification. Special steel, hardened DIN 2273
0513 Sinus rules 2273 0513 001 2273 With sinus table 0513 011 Without stop type B With stop type A Roller spacing Length tolerance Ref. No. List price mm µm Euro 100 2 0513 001 139.00 200 4 0513 002 159.00
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
Pipeline Accessories. Flange Isolation Gaskets 4 pipes
Pipeline Accessories Flange Isolation Gaskets 4 pipes Flange Isolation Gaskets 4 pipes Combi-Seal G and Combi-Seal TW High quality flange gasket and electrical isolation point Flange Isolation Gasket TA
SMA. Automatic Minimum Flow System PN 250-PN 400 ANSI look at info overview. 180 bar < < 400 bar
Automatic Minimum Flow System look at info overview PN 250-PN 400 ANSI 1500-2500 180 bar < < 400 bar 7 V R The Automatic Minimum Flow System SMA 63/64 is a protection device for pump protection. It automatically
Swing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Maxifluss Rotary Plug Valves VETEC Types 72.3/R and 72.4/R
Maxifluss Rotary Plug Valves VETE Types 72.3/R and 72.4/R Application Double-eccentric control valve for process engineering and industrial applications Nominal sizes DN 25 to 400 NPS 1 to 1 Nominal pressures
Two-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Mounting and operating instructions
Mounting and operating instructions Safety clutch SI Responsible Mädler branches according to German Post Code Areas: For Switzerland: PCA 1, 2 and 3 PCA 0, 4 und 5 PCA 6, 7, 8 und 9 Mädler-Norm-Antrieb
optibelt KS V-Grooved Pulleys - Balancing, Surcharges for Finished Bores
optibet KS V-Grooved Pueys - Baancing, Surcharges for Bores 1 2 3 4 5 6 7 8 9 10 11 Baancing: The ist prices appy, as per VDI 2060, to cast iron pueys baanced in one pane as foows: Grade G 16 for Ø d d
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
For ball valves
Soft seal Ball valve Float ball valve Flange PN16-40 DN15-200 For 1.4408 ball valves Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries Temperature
Multiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals
Multiway Ball Valve with Vertical In-/Outlet Metal Seated Type 24-M Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe
Three-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
Thermoplastic Centrifugal pump, Type NM
Thermoplastic Centrifugal pump, Type NM acc. to DIN 24256, EN 22858 and ISO 2858 Size: 32-125 up to 150-400 Capacity Q: up to 450 m 3 / h Head H: up to 100 m Operating temperature t: PE up to + 70 C PP
Machine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,
Industrial-Thermometer
Industrial-Thermometer Index According to Types Industrial Thermometers Details of Design Casings Aluminum, V-shaped, completely polished, gold-colored anodized (or silvercolored upon request). Numerals
Two-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Contents Technical characteristics Han A Technical characteristics Han 3 A with HARAX Termination
Contents Page... 01.02 3 with HRX Termination... 01.04 3, 3 with HRX Termination... 01.05 4... 01.06 10... 01.07 16... 01.08 32... 01.09 01 Features Metal and plastic version available 3 hoods/housings
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
Hydraulic Components. Bellhousings Damping elements Cooling systems Oil tanks.
Hydraulic Components Bellhousings Damping elements Cooling systems Oil tanks www.ktr.com ALUMINIUM TANK BAK HYDRAULIC COMPONENTS Tank with oil collecting groove Tank with oil collecting groove BAK 13 View
Electromechanical Keyseating and Profiling Machines
Electromechanical Keyseating and Profiling Machines Innovation, Quality, and Operating Efficiency Keyseating Keyseating is a cutting manufacturing process. Grooves for wedges and feather keys are applied
Levelling valve
Levelling valve 464 006 Application Purpose Maintenance Vehicles with conventionally controlled air-suspension. Control of a constant ride height of the chassis by charging the air-suspension while compressing
Two-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
Sempell High Pressure Stop Valves Model VA500 (ASME)
7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features
Actuator piston position Sensor Type SHE
Actuator piston position Sensor Type SHE Applications: Non-contact detection of piston position in the actuator Contents Index Page Description... 2 Components... 2 Installation... 3 Amplifier / Display...
E[M]CONOMy. means: Not just training: Real action! CONCEPT MILL 260. CNC training with industrial performance
![E[M]CONOMy. means: Not just training: Real action! CONCEPT MILL 260. CNC training with industrial performance](/thumbs/77/75526014.jpg "E[M]CONOMy. means: Not just training: Real action! CONCEPT MILL 260. CNC training with industrial performance")
[ E[M]CONOMy ] means: Not just training: Real action! CONCEPT MILL 260 CNC training with industrial performance Concept MILL 260 The new Concept Mill 260 combines all benefits of the proven CM 250 with
Technische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation Fully Lined Sampling Valves XOMOX International GmbH & Co. OHG Dok. Nr.: tdb_sample_gb Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Fully
Vario Line Spring pressure single-disc brake H00
Vario Line Spring pressure single-disc brake 76 431..H00 Vario Line Industrial Drive Systems Die Welt von Kendrion Industrial Drive Systems Kendrion The brake experts As a solution provider, Kendrion develops,
Throttle Check Valve Series FM
Characteristics Double-throttle check valves from the Parker Manapak series FM are in sandwich design for easy configuration of stack systems. Throttle and check valves are located in ports A and B. FM2
RC 200 designs. Pressure ranges RC 200-DA: 2-10 bar / psi RC 200-SR: 2-10 bar / psi
RC-DA/SR Technical Data RC-DA RC-SR All Remote Control actuators are 0% leak and functional tested Marked according to international standards Delivered with instructions in all EU languages Temperature
Small cases... the perfect shell for valuable electronics
Small cases... the perfect shell for valuable electronics Small cases page 178 mini page 181 page 183 all standard size cards (100, 120, 160, 190 to 233,35 ) can be installed in one case favourable EMC
! C A U T I O N! Damages on the machine possible.
1 The PIK is a connecting element between electro motor and hydraulik pump in combination with an oil - air cooler. General Hints Please read through these mounting instructions carefully before you assemble
Sempell High Pressure Stop Valves Model VA500 (DIN)
Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features Type tested (except for material
2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
PLAIN BEARING TECHNOLOGY PLAIN BEARINGS TYPE ZR/ ZG
PLAIN BEARING TECHNOLOGY PLAIN BEARINGS TYPE ZR/ ZG The ZOLLERN Group ZOLLERN GmbH & CO. KG is a company with world wide operations, employing over 3000 employees in the business fields of transmission
Needle Roller Bearings
Needle Roller Bearings INTERPRECISE Donath GmbH Ostring 2 90587 Obermichelbach Germany Phone +49-911-76630-0 Fax +49-911-76630-30 info@interprecise.de www.idc-bearings.com Needle roller bearings with flanges
IntraNozzle Flow Nozzle Type: IFN
IntraNozzle Flow Nozzle Type: Technical Information 03/2016 THE EXPERT IN LEVEL AND FLOW FLOW Flow Nozzles Technical Information Intra-Automation GmbH Intra-Automation Technical Information 03/2016 Technical
INSTALLATION AND OPERATING MANUAL Translation of the original manual. Series SCK. Mechanical Seal. double, to DIN EN Keep for future use!
Series SCK INSTALLATION AND OPERATING MANUAL Translation of the original manual Mechanical Seal double, to DIN EN 12756 Keep for future use! This operating manual must be strictly observed before transport,
Geared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
PLQE. PLQE Economy Line. The easy to install planetary gearbox absorbs high forces with low heat generation
Economy Line The easy to install planetary gearbox absorbs high forces with low heat generation Our is uncomplicated and powerful. It can be connected directly to your installation without the need for
Pneumatic Valve 4V100 Series
tic Valves Pneumatic Valve 4V100 4V100 Low power consumption exhaust for the pilot and main valve, small size, large flow, good appearance, flexible, can be integrated installation, high wear resistant
Type 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
1360 DIGI-MET Depth gauges
360 DIGI-MET Depth gauges 862 Protection class IP67 862 Straight measuring rod RS 232 + Digimatic + USB mm inch mm inch mm inch 50 6 00 4 0.0.005 360 76 304.00 200 8 00 4 0.0.0005 360 78 345.00 300 2 50
High-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
G E Z E D O O R T E C H N O LO G Y INTEGRATED DOOR CLOSERS GEZE BOXER RANGE B E W E G U N G M I T S Y S T E M
G E Z E D O O R T E C H N O LO G Y MOVEMENT AS IF BY MAGIC INTEGRATED DOOR CLOSERS RANGE B E W E G U N G M I T S Y S T E M CONTENTS door closer for single-leaf doors with a leaf width of up to 1400 mm
NEW EFD fuse disconnector
NEW EFD fuse disconnector More space for finger to open fuse carrier Advantages of cylindrical fuse disconnector EFD ompliance with IE 60947-1, IE 60947-3, UL 4248-1, UL 4248-4, UL 4248-8, UL 486E and
Han-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
Natural gas engine E 0836 LE 202 Technical data
Page 1 Principle: No of cylinders : Supercharging: Mixture cooling: Engine cooling : Lubrication : Spark plugs: Starter motor: 4-stroke Otto gas engine 6 in line Exhaust turbocharger with water-cooled
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
Installation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
Quick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
MARKALAMA CİHAZLARI. Çiziciler. Pergeller. Markalama Kumpasları. Markalama Kumpasları. Özel Markalama Kumpasları. Yükseklik ve Markalama Mihengirleri
MARKALAMA CİHAZLARI 2 3 5 7 10 14 Çiziciler Pergeller Markalama Kumpasları Markalama Kumpasları Özel Markalama Kumpasları Yükseklik ve Markalama Mihengirleri 0301 Precision dividers With a rivetted hinge
Collet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
ball valve soft seated maintenance-free with floating ball
Data sheet 8220.1/8 TOPI 210 ball valve soft seated maintenance-free with floating ball The sealing variants are approved in accordance with the german clear air regulations TA-Luft 2002 Flanged ends PN
DIN EN General
DIN EN 10357 General DIN EN 10357 was developed for seam welded tubes made of stainless steel for pipeline systems in the food, pharmaceutical and chemical industries. DIN EN 10357 (2014-3) replaces DIN
Industrial Batteries Network Power Powerfit S500 High energy density for maximum security. Specifications
Industrial Batteries Network Power Powerfit S500 High energy density for maximum security. Specifications If cost efficiency and high performance are requested. Specifications Especially designed for safety
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
NTT CENTRIFUGAL PUMPS TO EN733 (DIN 24255) FOR HEAT TRANSFER OILS UP TO 350 C
FOR HEAT TRANSFER OILS UP TO 350 C WE HAVE ALL THE TICKS Version 1 - NTT: Rapid Allweiler Pumps Whilst all care has been taken to ensure the accuracy of the information contained in this brochure was correct
Maxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT
Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN
Every component precisely matched
Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
Technical Data Part-turn gearbox 2SP78
Part-turn gearbox 2SP78 Contents Page General data Mounting position, duty classifications, noise level, paint finish and corrosion protection, lubrication, degree of protection, ambient temperature 2
SEMPELL HIGH PRESSURE CHECK VALVE MODEL VR500 (ASME)
Designed for use in high temperature and high pressure systems wherever a reverse flow has to be avoided. FEATURES Piston type check valve Body made of forged steel Wear resistant stellite body seat Separated
Natural Gas Engine E 0836 E 302 Technical Data
Page 1 Principle: 4-stroke Otto gas engine No of cylinders : 6 in line Engine cooling : Without engine water pump, coolant to be circulated by external water pump with temperature control. Lubrication
Electronic Enclosures Technical Information 445/441 Panel Instrument Cases Acc. to DIN 43700/IEC 61554
Electronic Enclosures Technical Information 3. Switching and Control Panel (Switchboard) Instrument Cut Outs 2,5 t 3,2 Type l Permitted tolerance l2 Permitted tolerance X M 2 Specification for a switchboard
Identification Code: P 203-VDC with/without PCB V10-V13, H
Identification Code: P 0-VDC with/without PCB V0-V, H P0, P0 U with - outlets and 4 8 5 Y N = l transparent plastic = 4 l transparent plastic = 8 l transparent plastic = 5 l transparent plastic = reservoir
Description Product group Rod seal
Description Product group Rod seal Design N symmetrical u-ring (05) NI asymmetrical u-ring with inner main sealing lip (07) Profile no. 05/07 Specification E suitable for onesided pressure load Model STI
DICTATOR RTS Tube Door Closer
DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is virtually invisible because being built into the door. The joint can only be seen when the door is open. The
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
ADJUSTABLE PITCH SERIES
ADJUSTABE PITCH SERIES FEATURES: Stock Sizes - 1 and 2 grooves up to 25 HP Both 1 and 2 groove adjustable sheaves permit variations of as much as 30% in speed when used with a fixed diameter sheave Available
T6-PLAN HYGIENE CENTRALLY CONNECTED RADIATOR.
Technical data 59 T6-PLAN HYGIENE CENTRALLY CONNECTED RADIATOR. T6 PLAN HYGIENE Connections 4 x internal thread G 1/2 and 2 x external thread G 3/4 bottom centre 13 bar 10 bar max. max. Test positive pressure