squareworx For every eventuality: Square shoulder, slotting and chamfering milling with only one insert
|
|
- Molly Elliott
- 6 years ago
- Views:
Transcription
1 squaewox Fo evey eventuality: Squae shoulde, slotting and chamfeing milling with only one inset
2 squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies One fo two: Squae shoulde, slotting and chamfeing milling opeations with only one inset and two cutte bodies squaewox is the name of the new, multifunctional milling system fo pecise machining with both 90 and 45 kappa appoach angles and only a single inset. One inset is thus enough to pefom squae shoulde, slotting, face and chamfeing milling opeations. Each inset has fou useable cutting edges with a cone adius of 0.8 mm. Cutting tool mateials in five diffeent qualities cove the machining of all standad mateials, anging fom oughing to. All of the available shelltype, theaded shank and plain shank cuttes possess the maximum possible numbe of teeth. In combination with the mandatoy intenal coolant supply, this featue allows high feedates. With the Ø mm 45 appoach angle chamfeing milling cuttes, in addition to debuing, both fowad and evese chamfeing opeations up to a cutting depth ap of 5 mm ae possible thanks to thei special geomety. Ease of cutting is always guaanteed thanks to the highpositive geomety, even with machines featuing less sophisticated geomety. Futhemoe, the costs ae extemely low thanks to the fou useable cutting edges in combination with high emoval ates. With these featues and such outstanding application flexibility, squaewox is the latest milling system fom POKOLM to lay claim to the attibute of maximum efficiency fo itself. The squae shoulde and slotting cuttes (90 appoach angle) ae available fom stock in diametes between 25 and 66 mm and have an embedded inset seat. Squae shoulde and slotting cuttes SQ One inset fo two cutte bodies Chamfeing milling cuttes SQ cutting edges, cone adius 0.8 mm Connection types squaewox cutte bodies ae available with shelltype connection, theaded shank and with plain shank All tools featue an intenal coolant supply fo maximum pocess safety and eliable chip extaction. Shelltype Theaded shank Plain shank 2
3 SQUAREwox M in Detail SQUAREWORX Featues at a glance 90 appoach angle tool: Pecise squae shoulde, slotting and face milling, embedded insets 45 appoach angle tool: Both fowad and evese chamfeing and debuing up to a cutting depth ap of 5 mm Low stoage costs thanks to the use of only one inset fo two tool geometies 4 useable cutting edges pe inset, low costs pe cutting edge Cleaance angle 15, cone adius 0.8 mm High feedates thanks to a lage numbe of teeth Ease of cutting, also suitable fo machines which featue less sophisticated geomety Tool diamete mm High emoval ates, maximum efficiency Fo ough, medium and fine cutting Insets fo nealy all mateials: Extemely shap insets machined by peipheal ginding tailoed fo use with nonfeous metal; sinteed insets fo all othe mateials Beakdown of ode numbe fo Milling cutte bodies Beakdown of ode numbe fo Insets Example: SQ09025Z Example: SQ098042R08MP System key SQ SQUAREWORX Inset size mm [l] Nominal diamete Ø mm [d 1 ] Connection types E Theaded shank A Shell type Z Plain shank Connection size Ø mm [d 2 ] Numbe of teeth Usable length mm [l 3 ] Appoach angle Kappa System key SQ SQUAREWORX Inset size mm [l] Gade specification Cone adius Chip beake L fo light cutting M fo medium cutting R fo heavy cutting ISO Mateial goup P M K N Steel Stainles steel Cast ion Nonfeous mateials Pactical video squaewox in S H Hightempeatue alloys Hadened steel 3
4 Squaewox Size M Shoulde face and slotting milling cuttes SQUAREWORX stands out though its high application flexibility when used as shoulde face and slotting milling cuttes: Fou efficiently useable cutting edges with a eal cone adius of 0.8 mm Lowe powe consumption; is also the ideal choice fo use on machines featuing less sophisticated geomety Efficient: Fast feedates and high emoval ates thanks to a lage numbe of teeth Optimum swaf conveyance thanks to intenal coolant supply Milling cutte bodies Catalogue no. d 1 l/d l 3 l 2 l 1 d 2 d 3 z Accessoies Featues Plain shank end mill bodies l2 l1 l l l squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies SQ09025Z diam A, B, C, D, E Theaded shank end mill bodies l2 SQ09025E M A, B, C, D, E SQ09032E M A, B, C, D, E SQ09035E M A, B, C, D, E SQ09040E M A, B, C, D, E SQ09042E M A, B, C, D, E Shell type milling cutte bodies l2 Accessoies SQ09040A diam A, B, C, D, E SQ09042A diam A, B, C, D, E SQ09050A diam A, B, C, D, E SQ09052A diam A, B, C, D, E SQ09063A diam A, B, C, D, E SQ09066A diam A, B, C, D, E P Tox scew A > Page P Toxscewdive (ToxPlus) B > Page 7 TV 082 Scewdive toque Vaio S with window scale, C > Page 7 T8 500 P Tox intechangeable bit fo Toque Vaio D > Page 7 T8 502 P Tox MagicSping compatible bit f. Toque Vaio E > Page 7 latest items! available as long as stock lasts on equest stock item, subject to confimation 4
5 45 45 Squaewox Size M Chamfeing milling cutte SQUAREWORX stands out though its application flexibility when used as a chamfeing milling cutte: Fowad and evese chamfeing Fou efficiently useable cutting edges Efficient: Fast feedates thanks to a lage numbe of teeth Optimum swaf conveyance thanks to intenal coolant supply Milling cutte bodies Catalogue no. d 1 l/d l 3 l 2 l 1 d 2 d 3 z Accessoies Featues Plain shank end mill bodies SQ09016Z diam A, B, C, D, E SQ09020Z diam A, B, C, D, E SQ09025Z diam A, B, C, D, E l1 Theaded shank end mill bodies SQ09016E M A, B, C, D, E SQ09020E M A, B, C, D, E SQ09025E M A, B, C, D, E SQ09035E M A, B, C, D, E Shell type milling cutte bodies SQ09040A diam A, B, C, D, E SQ09050A diam A, B, C, D, E SQ09063A diam A, B, C, D, E 45 Accessoies P Tox scew A > Page P Toxscewdive (ToxPlus) B > Page 7 TV 082 Scewdive toque Vaio S with window scale, C > Page 7 T8 500 P Tox intechangeable bit fo Toque Vaio D > Page 7 T8 502 P Tox MagicSping compatible bit f. Toque Vaio E > Page 7 5
6 l squaewox M squae shoulde, slotting and chamfeing milling cutte bodies milling cutte bodies Indexable insets s l s M SQ098048R08MP SDKT 09T308 SR P40 PPGO M 3.0 SQ098062R08MK SDKT 09T308 SR K10 PCSR M 3.0 SQ098099R08MS SDKT 09T308 SR M35 PCTC M 3.0 SQ098096R08MM SDKT 09T308 SR M40 PPST M 3.0 SQ098020R08MN SDHT 09T308 FR K10 polished M 3.0 Catalogue no. DIN Specification Cabide Gade Coating Feed pe tooth (fz) d.o.c. (ap) Mateial Cabide Gade Coating P40 PPGO K10 PCSR M35 PCTC M40 PPST K10 polished Feed pe tooth d.o.c. 0,050,3 0,15 0,050,2 0,12,5 Cutting speed (Vc in m/min) Mateial Cabide Gade Coating P40 PPGO K10 PCSR M35 PCTC M40 PPST K10 polished 0,050,25 0,15 steel 0,050,17 0,15 0,050,25 0,15 0,040,25 0,15 stainless steel 0,050,2 0,15 0,050,2 0,15 Application oughing pe oughing pe oughing pe oughing pe oughing pe steel stainless steel cast ion cast ion nonfeous mateials 0,040,13 0,14 hightempeatue alloys 0,050,35 0,15 nonfeous mateials 0,050,25 0,15 0,040,15 0, hightempeatue alloys hadened steel hadened steel majo application mino application oughing pe 6
7 Extended opeation data Plunging Ramping Helix α X X Y D min max Cutte diam. X max Cutte diam. α y 25 < < < < < < < < < Cutte diam. D min D max Accessoies Catalogue no. Desciption Tox scews Tox scews P Tox scew M 3.0 L 7.0 T 8 Plus 1.5 Nm M 3.0 L 7.0 T 8 Plus 1.5 Nm Spannes / scewdives Toxscewdive P Toxscewdive (ToxPlus) T 8 Plus T 8 Plus Toque scewdives and accessoies Toque scewdives TV 082 Scewdive toque Vaio S with window scale fom Nm 0.8 up to 2,0 Nm with scale, inc sette fom Nm 0.8 up to 2,0 Nm Toque scewdives and accessoies Tox bits, standad T8 500 P Toque scewdives and accessoies Tox bits with etaining sping T8 502 P Tox intechangeable bit fo Toque Vaio T 8 IP L 175 max. 2.0 Nm Tox MagicSping compatible bit f. Toque Vaio T 8 IP L 175 max. 2.0 Nm T 8 IP L 175 T 8 IP L 175 max. 2.0 Nm max. 2.0 Nm 7
8 FL325EN Pokolm Fästechnik GmbH & Co. KG AdamOpelStaße Hasewinkel Gemany Fon: Fax: info@pokolm.com
UNIWORX PLUS. All-purpose corner radius/high-feed milling cutter for countless finishing options
UNIWORX PLUS Allpupose cone adius/highfeed milling cutte fo countless finishing options uniwox plus cone adius / high feed millng cutte bodies Milling cutte bodies uniwox PLUS univesal cone adius and HIGHfeed
More informationslotworx Square shoulder face milling and slotting cutters with highly modern cutting edge geometry for universal applications
slotwox Squae shoulde face milling and slotting cuttes with highly moden cutting edge geomety fo univesal applications Object slotwox 177183 squae shoulde face milling cutte bodies milling cutte bodies
More informationTungsten carbide burrs with STEEL cut High-capacity burrs for steel and cast steel
Tungsten cabide bus with cut High-capacity bus fo steel and cast steel Up to 50 % highe stock emoval pefomance when used on steel and cast steel in compaison to conventional coss cut bus Significantly
More informationTungsten carbide burrs with CAST cut High-capacity burrs for cast iron
Tungsten cabide bus with cut High-capacity bus fo cast ion Up to 100 % highe stock emoval pefomance in compaison to conventional coss cut bus Significantly inceased aggessiveness, lage chips and vey good
More informationTungsten carbide burrs with ALU cut High-capacity burrs for aluminium
Tungsten cabide bus with cut High-capacity bus fo aluminium Vey boad and compehensive ange, including miniatue bus fo delicate applications Extemely high stock emoval pefomance, long tool life and smooth
More informationUp to 100 % higher stock removal performance when used on stainless steel (INOX) in comparison to conventional cross cut burrs
Tungsten cabide bus with cut High-capacity bus fo use on stainless steel () INNOVATION cut Up to 100 % highe stock emoval pefomance when used on stainless steel () in compaison to conventional coss cut
More informationSAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
More informationCERAMIC INSERTS For Turning, Grooving and Milling
SPK Cutting Tools VEHICLES AEROSPACE GEARS & BEARINGS ENGINEERING WIND ENERGY DISCOVER A MULTITUDE OF SOLUTIONS CERAMIC INSERTS Fo Tuning, Gooving and Milling DISCOVER A MULTITUDE OF SOLUTIONS AEROSPACE
More informationTWIN-SAF SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING TN-P00 GROOVING TN-P00 TURNING TN-P00 PROFILING TN-F00 TN-F90 FACE GROOVING
/ PARTING & GROOVING / PROGRAM OVERVIE TIN-SAF SYSTEM PARTING TN-P00 TN-B02 48 380 Shank... p 172 Blade... p 176 Blade holde. p 177 p 169 p 171 GROOVING TN-P00 28 38 48 88 380 Shank... p 172 p 168 p 168
More informationBearing specification tables
eaing specification tables ontents Standad beaings Deep goove ball beaings... 4 Single-ow Open type... 8 Shielded/sealed type... 0 Snap ing goove/locating snap ing type... 3 Exta-small, miniatue ball beaings
More informationFull complement cylindrical roller bearings
Full complement cylindical olle beaings INTERPRECISE Donath GmbH Osting 2 90587 Obemichelbach Gemany Phone +49-911-76630-0 Fax +49-911-76630-30 info@intepecise.de www.idc-beaings.com Full complement cylindical
More informationLarge Size Tapered Roller Bearings ULTAGE Metric Series
Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies AT. No. 3035/E Lage Size Tapeed Rolle Beaings ULTAGE Metic Seies Lage size tapeed olle beaings (ULTAGE metic seies, OD 270) delive longe life, highe load
More informationAngles Hot rolled, weldable structural steel sections
Data sheet: E3.1 Angles Hot olled, weldable stuctual steel sections Geneal desciption AceloMittal Steel South Afica, Newcastle Steel poduces an extensive ange of stuctual steel angles. Non-standad sizes
More informationHard metals for precision tools
had mateial mattes Had metals fo pecision tools CERATIZIT - the paent companies Headquates and paent company in MAMER / Luxemboug Paent company in REUTTE / Austia iect sales and distibution patnes 2 Ou
More informationTriple-Sealed Bearings for Bearing Units
Fo New Technology Netwok copoation R Tiple-Sealed eaings fo eaing Units NTN Tiple-Sealed eaings fo eaing Units These eliable tiple-sealed beaings ae dustpoof and watepoof. They ensue a longe beaing life
More informationMini-V Precise Turning, Grooving, Threading & Face Grooving
INERNAL MACHINING Mini-V Pecise uning, Gooving, heaing & ace Gooving MERIC Innovative Gooving & uning Solutions Mini-V Mini ools fo Small & Meium Boes he Mini-V line by Goovex offes impove solutions fo
More informationRPG. Characteristics&Advantages
RPG Chaacteistics&Advantages R PG B l o ck Bo d y Lu b e R es e vo i & En d Ca p Lu b e R ete n t i o n M ed i a En d S ea l M et a l Fa m e Bo l t s Fo u R ows o f Bea i n g s Bot to m S ea l Bo l t H
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings Costs savings though apid beaing eplacement at difficult to access beaing locations Contents Rapid beaing eplacement 2 Cost savings 2 Application examples 2 Replacement fo beaings
More informationTools for Aluminum. New Expanded Offering. ISO 9001 Certified
Tools for Aluminum New Expanded Offering www.kyocera-sgstool.com ISO 9001 Certified S-CAB HIGH PEFOMANCE END MILLS The original, symmetrical flute design features an engineered flute form that provides
More informationDeep Groove Ball Bearings
Deep Goove all eaings Open type Shielded type Sealed type (non-contact) Expansion Compensating eaing 1. Design featues and special chaacteistics Deep goove ball beaings ae vey widely used. A deep goove
More informationSafety detection solutions Safety interlock switches by actuator, with solenoid, turret head Metal, type XCS LF Plastic, type XCS LE
Pesentation by actuato, with solenoid, tuet head opeating by actuato With emegency elease mushoom head pushbutton Pages / and / Pages /6 and / opeating by actuato Pages / and / Envionment chaacteistics
More informationCylindrical Roller Bearings
ylindical olle eas ontents Seies M1000, 1200, 1300, 1900, 5200, 5300, 7300 Intoduction... G-1 Pictoial Index... G-3 Selection... G-5 atings... G-7 Dimensions... G-15 Shaft Dimensions... G-25 Housing Dimensions...
More informationStandard Styles inch/metric
Rolle eaings Radial Cylindical Rolle eaings oe inch: metic: 200 20.0 in. 200 200 mm 42 4.25 in. 210 210 mm 43 4.375 in. 220 220 mm standad sizes standad sizes ae 4-27.20 inch ae 100-600 mm Standad Styles
More informationPreview Edition: M370 ADVANCES 2014
Preview Edition: M370 ADVANCES 2014 TURNING SOLID END MILLING INDEXABLE MILLING TOOLING SYSTEMS METRIC High-Feed Applications M370 Series Designed for high feed rate productivity, M370 Series provides
More informationMachining modern composite materials
GÜHING HIGH-PEFOMANCE TOOLS FO MACHINING FIBE COMPOSITE MATEIALS without fraying of fibres and delamination for optimal component surface finish quality Machining modern composite materials GÜHIN GUHING
More informationMAE 412 Machines and Mechanisms 2: Catapult Project 12/13/02
MAE 1 Machines and Mechanisms : Catapult Poject 1/1/0 Michael Kuczewski Nicholas Laatta Jonathan Leahy Nicholas Leone Kuan Kiong Lim William Louisos Atuo Machuca Jeemy Malik Intoduction: The goup s task
More informationQ TABLE PREVIOUS PAGE F OF CONTENTS NEXT PAGE
TABLE F OF CONTENTS FINDEX A-Z TABLE F OF CONTENTS F TABLE OF CONTENTS INDEX A-Z PEFIX TABLE OF CONTENTS......................... - GENEAL INFOMATION....................... 8 TEMS........................................
More informationZEPHYR ZT802X POSITIVE FEED DRILL
EPHY G O U P TOOLS ENGINEEED TO PEFOM T802X POSITIVE FEED DILL A 90 DEGEE, MANUALLY OPEATED ANGLE DILL WITH AUTO ETACT AND MINIMUM SPINDLE OFFSET PEMITS USE IN ESTICTED AEAS Specifications ephyr's new
More informationNegative Inserts Positive Inserts. Turning Negative Inserts CN 80 Rhombic. Turning Positive Inserts CC, CP 80 Rhombic
uning Indexable s ~88 uning Indexable s Identi cation ystem olo hipbeake election egative s ositive s ow to ead pages of uning s emet / oated abide / abide ineup uning egative s 80 hombic hombic aallelogam
More informationCylindrical Roller Bearings EW Series
Cylindical Rolle Beaings NSK has developed a highe load-caying capacity pessed cage with low noise and supeio cage stength. Ou seies is a standad cylindical olle beaing that facilitates intechangeability
More informationThe contents of this catalogue are the copyright of ESE and may not be reproduced unless permission is granted.
Copyight ESE 2018 The contents of this catalogue ae the copyight of ESE and may not be epoduced unless pemission is ganted. Caes have been taken in evey aspect to ensue the coectness of the data contained
More informationSECTION 32 - PAD-MOUNTED CAPACITORS TABLE OF CONTENTS
. PAD-MOUNTED CAPACITOS PAD-MOUNTED CAPACITO PAD-MOUNTED CAPACITO.-A.-B. PAD-MOUNTED CAPACITO OPEATIONS PAD-MOUNTED CAPACITOS ENEGIZING PAD-MOUNTED CAPACITO DE-ENEGIZING PAD-MOUNTED CAPACITO PAD-MOUNTED
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationmodel H with1920
model with1920 ADA Compliant Chilled Dual Wall-Mount Fountain and Bottle Filler FEATUES & BENEFITS CONSTUCTION 18-gauge Type 304 stainless steel swirl design bowl, 14-gauge Type 304 stainless steel bracket,
More informationFirst Floor Plan - EPC105, 111 and 113 Remodel EL POMAR CENTER (EPC) Facilities Services. Scale: As Shown Date: 05/31/17 Drawn by: LCE
E:\Projects\2017 Projects\17014\Drawings\Mechanical\17014 Mechanical.dwg Facilities Services First Floor Plan - EPC105, 111 and 113 emodel EL POMA CENTE (EPC) M1 Leffingwell Consulting Engineers, Inc.
More informationCrossed Roller Bearings. Technical Information.
Cossed Rolle eaings Technical Infomation www.hiwin.tw INDUSTRIE 4.0 est Patne Multi Axis Robot Pick-and-place / Assembly / Aay and packaging / Semiconducto / Electo-Optical industy / Automotive industy
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationRoller Bearings for Machine Tools. Precision Ball & Roller Bearings for Machine Tools
Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools Pecision Ball & Rolle Beaings fo Machine Tools CAT. NO. B2005E-1 Catalog Pecision Ball & Rolle Beaings fo Machine Tools Peface
More informationEaton Aeroquip Triple Crown
Eaton Aeoquip Bette in evey way that mattes Tempeatue Abasion Resistance Eaton engineeing does it again. Select Aeoquip hydaulic hoses, including new MatchMate Global hoses, offe distinct advantages in
More informationMCM CABLE 3/15/2010
00 000 MCM CABLE //00 C UEE Elbow Enclosure - Deadend C UEE Elbow Enclosure - Feed-Through C UP 000 MCM Cable iser ~ UP 000MCM Power Cable iser Grounding Detail N UP 000 MCM Cable iser with Ø Switch N
More informationCONTENTS TECHNICAL CNMG/M DNMG KNUX SNMG/M TNMG VNMG WNMG
CONTENTS NEGATIVE INSERTS POSITIVE INSERTS CNMG/M 80º RHOMB PAGE 01 CCMT PAGE 08 80º RHOMB DNMG 55º RHOMB PAGE 02 DCMT PAGE 09 55º RHOMB KNUX 55º PARALLELOGRAM PAGE 0 RCMT PAGE 10 ROUND SNMG/M 90º SQUARE
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Technical featues Pecision combined beaings Types AXN and ARN combined beaings and thei deivatives consist of a adial needle beaing with cage, in
More informationBreaker. Sensation of high speed aluminum machining. Feature
VF Sensation of high speed aluminum machining Breaker Feature - Multi-dimension clamping system : strong clamping force in high speed operation. - Buffed top face : Decreasing built-up edge & excellent
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More informationEaton EMEA Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton EMEA Coe Hydaulic Hose Poducts Bochue Success made simple. The new standad fo hydaulic hose and fittings. Sometimes less is moe. Fewe poducts, smate choices. Eaton is taking a new appoach to helping
More informationNEEDLE BUSHES. Polígono Indutrial O Rebullón s/n Mos - España -
NEELE USHES Polígono Inutial O Rebullón s/n. 36416 - Mos - España - oavigo@oavigo.com Technical featues Neele ushes Neele bushes consist of a thin, heat teate oute ing fome fom accuately contolle sheet
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationX-life High-Speed Spindle Bearings M. High-performance series for maximum productivity and low operating costs
X-life High-Spee Spinle eaings M High-pefomance seies fo maximum pouctivity an low opeating costs High-pefomance seies fo maximum pouctivity X-life High-Spee Spinle eaings M Tool spinles an, in paticula,
More informationTechnical features. Precision combined bearings
PRECISION COMINED EARINGS, WITH ADJUSTALE AXIAL PRELOAD Polígono Indutial O Rebullón s/n. 36416 - Mos - España - odavigo@odavigo.com Technical featues Pecision combined beaings Types AXN and ARN combined
More informationEPDRF. High-Precision Four Flute Corner Radius End Mills for Deep Machining FEATURES. Flute shape provides both rigidity and excellent chip removal.
High-Pecisio Fou Flute Coe Radius Ed Mills fo Deep Machiig FEATURES Flute shape povides both igidity ad excellet chip emoval. Upecedeted coe adius accuacy of ±0.005mm. Bottom flute wipe effect educes chatteig
More information7. BOUNDARY DIMENSIONS AND IDENTIFYING NUMBERS FOR BEARINGS
7. OUNARY IMENSIONS AN IENIFYING NUMERS FOR EARINGS 7. ounay imensions an imensions of Snap Ring Gooves 7.. ounay imensions he bounay imensions of olling beaings, which ae shown in Figs.7. though 7.5,
More informationSpherical Roller Bearings. NSKHPS, redefining the standard.
Spheical Rolle Beaings NSKHPS, edefining the standad. Continually developing poducts with geate stength and highe accuacy, NSK s new NSKHPS fully incopoate the advantages of NSK s woldclass design, mateials,
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationProjects Oil & Gas. Section Sales Programme
Pojects Oil & Gas Section Sales Pogae 1 2 To e ou pefeed supplie & eliale patne fo te suppl of complete and customized stuctual steel packages. celomittal Ou famil celomittal Wit annual acievale poduction
More informationFlexible hose solutions
Aeoquip Hose Assembly Maste Catalog Flexible hose solutions Ai conditioning and efigeation hose hose GH001.... -3 GH134.... -4 FC802... -4 FC800... -5 FC555... -6 AROQUIP MASTR CATALOG A-HOOV-MC001-3
More informationSTAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS
STAGE MANAGEMENT PRODUCTS - CHOIR STICK MICS #CSM- AND #CSM- CHOIR STICK MICROPHONES The CSM- and CSM- Choi Stick Micophones Stick micophone mounts on any standad mi- offe the ultimate pefomance of an
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationMilling. Widia s New M1200 Face Mill Program. Introducing... NEW!
Milling Introducing... Widia s New M1200 Face Mill Program NEW! specifically engineered to deliver consistent performance in demanding face-milling applications! Use less horsepower and gain up to 30%
More informationSolid Carbide Tools S-CARB APR S-CARB APF. Aluminum. Tools For Aluminum VALUE AT THE SPINDLE. ISO 9001 Certified Company
Solid Carbide Tools S-CAB AP S-CAB APF Aluminum Tools For Aluminum VALUE AT THE SPIDLE ISO 9001 Certified Company HIGH PEFOMACE EW! ALUMIUM MACHIIG AP - APF ADVACED PODUCTIVITY OUGHIG AD FIISHIG EDMILLS
More informationHot-rolled strip / sheet produced using soft steels for cold forming DIN EN Name Mechanical Properties Chemical Properties. R m [%] C. [%] max.
RODUT RANGE 1. Hot-Rolled tip and heet oft Gades Hot-olled stip / sheet poduced using soft steels fo cold foming DIN EN 10111 Name Mechanical opeties hemical opeties EN 10111 1,0 < e < 2 2 < e < 11 1,5
More informationInch Series TAPERED ROLLER BEARINGS
Inch Seies APERED ROLLER EARINGS Inch Seies APERED ROLLER EARINGS Publication of New Inch seies apeed Rolle eaing Catalog Allow us to expess ou heatfelt appeciation fo you valuable patonage. At this time
More informationSplit spherical roller bearings. Costs savings through rapid bearing replacement at difficult to access bearing locations
Split spheical olle beaings osts savings though api beaing eplacement at ifficult to access beaing locations Application examples Application examples in the pulp an pape inusty: Fans an ventilatos Mixing
More informationQ TABLE PREVIOUS PAGE F OF CON TEN TS N EXT PAGE
PEVIOUS PAGE O CON TEN TS IN DEX A-Z Q TABLE PEVIOUS PAGE O CON TEN TS TABLE O CONTENTS IN DEX A-Z PEIX TABLE O CONTENTS......................... - GENEAL INOMATION....................... TEM S........................................
More informationHYSTAR M16 3B 2.9(6.39) M22/M30* 5B 12.3(27.09) M24 8B 23.0(50.66) 250 (3,600) M16 2B 1.3(2.86) M16/M24* 3B 2.9(6.
-Pcwfictu hy *w #*/**» info@laanmachine.com www.laanmachine.com Specifications: Flow max. Pes. P max. Pilot Ratio Ipm ba P contol (PSI) /Pcyl. (USgpm) Flange bolts Numbe No. Dia. Pipe Size kg(lb) SVF-
More informationTungsten carbide burrs with TOUGH and TOUGH-S cuts The stock removal experts for tough applications
Tungsten cabide bus with and -S cuts The stock emoval expets fo tough applications Especially fo foundies, dockyads and steel constuctions TRUST BLUE Innovative, vey obust high-pefomance cuts poviding
More informationRubber Insulating Products, Safety Equipment & Dielectric Testing Services
Rubbe Insulating Poducts, Safety Equipment & Dielectic Testing Sevices Fo Electic Utilities, Contactos, Telecom, Cable Povides and Geneal Industy VOLTGaRD TEST Lab ChaNGE-OuT PROGRam Saf-T-GaRD INTERNaTIONaL
More informationtimken MiniatUre and thin-section bearings catalog
cylindical olle beaing catalog timken MiniatUe and thin-section beaings catalog Miniatue and thin-section eaings catalog index Timken Oveview......................................... 2 HOw TO USe THiS
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationSUPER PRECISION BEARINGS
SUPER PRECISION BEARINGS Intoduction As technologies evolve, all manufactues shae a global esponsibility to espect and potect the envionment. NSK Motion and Contol poducts eflect ou copoate commitment
More information-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationSuper precision BearingS
Supe pecision BeaingS SUPER PRECISION BEARINGS Pat1 Contents Pat1. NSK Supe Pecision Beaings Global Suppot Capabilities P6 Development Capabilities P8 Quality Contol and Poduction Capabilities P 4 5 Global
More informationBall & Roller Bearings
all & Rolle eaings CAT. NO. 1E-4 1 Stuctues and types A 1 Outline of selection A 14 3 Selection of type A 16 4 Selection of aangement A 5 Selection of dimensions A 4 ounday dimensions 6 A 46 and beaing
More informationAMENDMENTS TO CLUTCH CATALOGUE IN MONTH OF FEBRUARY 17
AMENDMENTS TO CLUTCH CATALOGUE IN MONTH OF FEBUAY 17 S NO GOUP SUBGOUP DIAGAM NO PAGE NO IN CAT. S NO IN CAT. DESCIPTION DATE OF UPDATE EVISION - - - - - - - - - CLUTCH ASSLY (430 & 395 DIA) Diagram No.
More informationPart List ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI. Seat. Armrests. Star Base. Caster. Arm Bolts. Back Bolts (M8 X 15mm) J K.
ASSEMBLY INSTRUCTIONS FUZ5B-LO/FUZ6B-HI Pat List Key Desciption Pat Qty. Spae A FUZ5B-LO Backest B FUZ6B-HI Backest C Seat D Amests ( left & ight amest) 2 E Seat Post(Cylinde) F Sta Base G Caste 5 H Am
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationBurrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
More informationPCD & CBN TANGENTIAL MILLING
& TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS
More informationmultidec -MULTITASK WILLEMIN-MACODEL NEW PROGRAMM OF TOOL-HOLDERS FOR TURNING AND MILLING MACHINING CENTERS
multidec -MUTITASK NEW POGAMM OF TOO-HODES FO TUNING AND MIING MACHINING CENTES WIEMIN-MACODE THE TOO FO EFFICIENT TUNING OPEATIONS ON MUTITASK MACHINES FOM WIEMIN-MACODE (TYPES 408 MT, 508 MT AND 508
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationExtremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
More informationArtisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
Looking fo moe infomation? Visit us on the we at http://www.atisan-scientific.com fo moe infomation: Pice Quotations Dives Technical Specifications. Manuals and Documentation Atisan Scientific is You~
More informationDevelopment, Study, and Testing of Small-Scale Refrigeration System for Electronics Cooling Using Cold Plate Evaporators
EM14 he Second SME Intenational Confeence on Mechanical Engineeing Development, Study, and esting of Small-Scale Refigeation System fo Electonics Cooling Using Cold late Evapoatos hanut Ratchatapattaakul
More informationEndmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
More informationBK-7 Plano Convex Lenses. Specifications & Tolerances
OPTICAL COMPONENTS Simple geneal use positive lenses Focal lengths om 8.0 to 5000mm Anti-Relection coatings available iames om 5.0 to 100mm See o additional poducts Achomatic oublets These ae simple lenses
More informationSR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More informationPASSION FOR PRECISION
222 INCH PASSION FO PECISION Formerly, HANA TOOLS CO., LTD. The future of WIDIN is always bright. WIDIN will share the same vision with customers by providing top quality products at competitive price,
More information1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
More informationOPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE
ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS WARRANTY CUSTOMER SERVICE -800-637-0005 WWW.EUROTECHSEATING.COM ASSEMBLY INSTRUCTIONS CHAIR NAME AND SKU OR MODEL Remove all items fom the caton. Veify all
More informationThe standard cages used are pressed steel cages. Additionally Copper alloy machined cages are also available.
Cylindical Rolle eaings Cylindical Rolle eaings These beaings equie featue high adial load as olles and aceway ae in linea contact. These ae ideal fo applications whee thee is heavy impact o adial loading.
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationInternal Turning, Profiling, Grooving & Face Machining of Small Diameters
Internl Turning, Proiling, Grooving & Fce Mchining o Smll Dimeters Insert Styles/ Applictions: MINT... Turning/Chmering MINP... Turning/Proiling MINC... Turning/45º Chmering MING... Grooving MINF... Deep
More informationInternational Motors/Gearmotors/Controls
International Motors/Gearmotors/Controls AC INTENATIONAL PODUCTS INTODUCTION The metric products listed in this section have been designed with international design standards in mind. The 230 volt, 50
More informationINNOVATIONS CATALOGUE. Mill 4 Series.
INNOVATIONS CATALOGUE Mill 4 Series 2015 Mill 4-15 Double-Sided Shoulder Mill Primary Application The Mill 4 Series is specially engineered to achieve excellent performance in surface quality as well as
More informationExpansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch).
igh Efficiency for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More information1400 UG PADMOUNT TRANSFORMERS
00 UG PADMOUNT TANSFOMES //0 ~ FA Bay-O-Net Fuse Schedule for Padmount Transformers ~ HB,HB Hillside Barrier ~ UID Padmounted Equipment Identification Tags & Safety Signs ~ UT Single Phase Padmount Transformer
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationPrecision Rolling Bearings
R Pecision Rolling Beaings CAT. No. 226-^/E C O N T E N T S Technical Data NTN PRECISION ROLLING BEARINGS Main Spindle Beaings Ball Scew Suppot Beaings NTN PRODUCTS APPENDIX 1. Classification of Pecision
More information