ZEPHYR ZT802X POSITIVE FEED DRILL

Transcription

1 EPHY G O U P TOOLS ENGINEEED TO PEFOM T802X POSITIVE FEED DILL A 90 DEGEE, MANUALLY OPEATED ANGLE DILL WITH AUTO ETACT AND MINIMUM SPINDLE OFFSET PEMITS USE IN ESTICTED AEAS Specifications ephyr's new T802X Positive Feed Drill offers a high power to weight ratio in a compact modular design with ease of operation and maintenance in mind. In addition to its unique features, the T802X offers a wider range of PM's and feed rates than any other tool in its class Capacity: n1.85 Aluminum-.Ø750" (19.0 mm) 1.09 Steel-Ø.500" (12.7 mm) Titanium-Ø.500" (12.7mm) -(Ø.625" Intermittent use) Carbon (Composite) Ø.625" (15.9 mm) Stroke: Minimum-.375" (9.525mm) 1.59 Maximum- unlimited PM: , 500, 700, 1000, 1400, 2800 PM Feed ate: ,.001,.002,.003,.004,.006, and.008 IP Weight: 4-1/4 lbs Kg Features: HP motor. 2. ight Angle design for close quarter application. 3. Designed for oil hole application. 4. Spindle utilizes 1/4-28 or 5/16-24 (.H. Threads) internal threads for standard threaded shank drill. 5. Auto retract at the end of drilling cycle. 6. The tool can start in either feed or the retract mode. 7. The spindle can be retracted at any given point during the feed cycle. 8. apid spindle retraction permits faster drilling cycle. Modular Design 1. Gear reducer sub-assembly: - Modular designed gear reducers use fewer components while offering a wide range of PM's. 2. Drill head module: - Smallest Drill head for close quarters drilling. 3. Nose piece Index Mechanism: - Easy access simple to operate index lever. - Allows orientation of the tool around drill axis in 30º increments. 4. No adapter needed for standard 1-20 internal thread nosepiece. 5. For peak performance air line pressures should be P.S.I. with hose of 3/8" diameter and tool fitting of 9/32". EPHY Manufacturing Co., Inc Page G17 06/13

2 EPHY G O U P TOOLS ENGINEEED TO PEFOM CYLINDICAL BODY FASTENE INSTALLATION AND EMOVAL TOOL KCB2000 A simple to operate, power tool for installa and removal of cylind power operated faste Made in the U.S.A. eight ners erse ovals PSI max. Clamping force up to 360 lbs EPHY Manufacturing Co., Inc Page I-14 02/15

3 EPHY G O U P TOOLS ENGINEEED TO PEFOM Super Kwik-Lok TEMPOAY FASTENES ODEING INFOMATION FO KSKC TYPE/STYLE HOW TO SELECT PAT NUMBE: Color; See Table 1 KSKC-(_)-( _)-( )-( _) Tool Diameter, D; Choose desired value C: Cylindrical Nut Driver; H: Hex Nut Driver Lower Bushing Diameter, A ; See Table 3 Grip Length, G ; See Table 2 Bushing Length, C ; See Table 3 Upper Bushing Diameter, B ; See Table 3 Table 2: Grip Length, G Nut Driver Example: KSKC-O-189-C5-EDC Table 3: Bushing Details B A C Table 1: Color A Aluminum K Black B Blue C Copper G Green A Lower Bushing Diameter B Upper Bushing Diameter C Bushing Length A G O Orange B ed C W White D D Y Yellow E EPHY Manufacturing Co., Inc Page I 15 02/15

4 EPHY G O U P TOOLS ENGINEEED TO PEFOM KWTC - Series Super Kwik-Lok with Torque Control Driver, TEMPOAY FASTENE INSTALLATION AND EMOVAL TOOL A simple to operate, yet rugged power tool for installation and removal of all power operated fasteners. EPHY Heavy duty Simple to insert and remove cylindrical or hex nu Small nose piece allows easy accessibility where eversible motor with finger tip control for switchi Greater torque in reverse for those difficult remov Available with optional adjustable internal torque Available Torque (in-lbs) PM T T T T EPHY ODEING INFOMATION HOW TO SELECT PAT NUMBE KWTC ( ) ( ) Torque(T1, T2, T3, T4) Body Size (B) Driver Size (D) CB = Cylindrical Body, H = Hex Nut KWIK-LOK Super Driver EPHY Manufacturing Co., Inc Page I-16 02/15

5 EPHY G O U P TOOLS ENGINEEED TO PEFOM Midget Kwik-Lok Low Profile Series Features: Free-Spin Upon reaching the end of the retract stroke (counter-clockwise rotation), the threads will disengage and the driver can rotate freely within the fastener body. This prevents the possibility of lock-up, ensuring that the fastener will start easily on the next installation. Soft-Clamp Ensures that clamp pressure is applied gradually to eliminate impact loading. This feature is especially important when clamping materials that are sensitive to impact stress, such as carbon fiber composites. ODEING INFOMATION HOW TO SELECT PAT NUMBE KSKM ( ) ( ) Grip Lenght (G).55 HEX Hole Size (D) KWIK-LOK Low Profile Ø.62 Kwik-Lok Part No. D (Hole Size) G (grip).94 Ø D Min.Grip Grip (G) KSKM /16 KSKM /4 KSKM /16 KSKM /8 KSKM /16 KSKM /16 KSKM /4 KSKM /16 KSKM /8 KSKM /16 KSKM /16 KSKM /4 KSKM /16 KSKM /8 KSKM / EPHY Manufacturing Co., Inc Page I /14

6 EPHY G O U P SP-100 TOOLS ENGINEEED TO PEFOM CT Shear Cutter Pliers Features: Stainless steel (nonmagnetic) Corrosion resistant 20 Offset tip Beveled edge for close cutting Handle type static dissipative Spring eturn 5" 20 7/16" EPHY Manufacturing Co., Inc Tel Fax sales@zephyrtool.com Page CT-1 06/13

7 EPHY G O U P TOOLS ENGINEEED TO PEFOM T110 Quick Change Chuck Designed to fit any standard drill motor with 3/8"-24 threaded chuck spindle. To remove or install tools with quick change shanks, simply slide front sleeve away from drill motor to disengage locking mechanism. T110 FONT SLEEVE STANDAD QUICK CHANGE 3/8-24" INTENAL THEAD 1.72 KNULED EPHY Manufacturing Co., Inc Page 07/13

8 EPHY G O U P TOOLS ENGINEEED TO PEFOM SK-12 Tool kit Pouch atchet and Bits An exclusive Kit from ephyr Tool Group that includes the most common tools you will need. The kit includes a high quality bits and atchet with small pouch, fits in your pocket or on your belt. Kit includes: - ATCHET, 1/4 HEX FEMALE - EXTENSION ASSEMBLY 1/4 HEX TO 1/4 S - HEX INSET BIT, 3/16 - SLOTTED INSET BIT, 1/4 - SLOTTED INSET BIT, 7/32 - SLOTTED INSET BIT, 3/16 - SLOTTED INSET BIT, 5/32 - PHILLIPS INSET BIT, #3 - PHILLIPS INSET BIT, #2 - PHILLIPS INSET BIT, #1 - PHILLIPS INSET BIT, #0 EPHY Manufacturing Co., Inc 02/14