ULTRALITE SPACEMATIC. Nutplate Drillmotor II/IIB DRILLING MACHINES

Size: px
Start display at page:

Download "ULTRALITE SPACEMATIC. Nutplate Drillmotor II/IIB DRILLING MACHINES"

Transcription

1 SPACEMATIC TM ULTRALITE DRILLING MACHINES Nutplate Drillmotor II/IIB One hand operation to locate, drill and countersink both rivet holes in a single 4 second operation. Tool is easily converted from one rivet hole spacing to another by interchanging the foot attachments and spindle spacer block. Standard Features ergonomic design fully adjustable feed rate standard foot assembly, collet-mandrel and cutters from previous model 3 lbs. lighter than previous model accommodates all nutplate spindle spacings from.219 to inches popular metric spacings available on special request Optional Features c-yoke foot attachment for edge applications booster pump to increase clamp and thrust forces for drilling in tough materials coolant-lubricant system for improved cycle time and increased drill life forward, rearward, right or left exhaust direction Specifications Drill stroke length: inches Available spindle speeds: 600 and 7,000 RPM Feed rate range: to inches per rev. Motor power: 0.54 HP Maximum air consumption: 18 CFM at 90 PSI Collet stroke length: inch Weight: 4.75 lbs. Hi-Shear Corporation 2600 Skypark Dr. Torrance, CA USA tel Tool Div. fax

2 Gearcap/Spindle Group: Model II tools- See pg Model IIB tools- See pg Item Part No. Description Qty. 1 Series WD WDS- note 1 Cutter 2 2 Series note 2 Pressure foot DW 1 Series note 2 Pressure foot MM 1 Series note 2 Pressure foot SW 1 3 note 2 Collet, clamp 1 4 note 2 Mandrel, clamp 1 5 note 2 Bushing, collet 1 6 note 2 Spring, collet notes 2, 3 Basic hsg assy. (.688, 7000) notes 2, 3 Basic hsg assy. (1.00, 7000) notes 2, 3 Basic hsg assy. (.688, 600) notes 2, 3 Basic hsg assy. (1.00, 600) 1 NUTPLATE DRILLMOTOR - MASTER ASSY Item Part No. Description Qty note 2 Gear cap group (.688) note 2 Gear cap group (1.00) Spindle assy. (5/16 front) Spindle assy. (1/4 front) Spindle assy. (3/16 front) 2 10 Series note 2 Finger, collet clamp 1 11 See Note 2 Spacer block Screw, but. hd (6-32 x 3/8) note 4 Skirt, protector, mach Screw,soc head (#8-32 x 1/2) Gasket, gear cap 1 NOTES: 1 See Cutter Selection and Application chart in Maint. Manual. 2 See Master Assy. charts in Maint. Manual. 3 To change speed, replace spindle insert (7000 RPM) with qty. 2 planetary gear assys (600 RPM) for all foot assemblies except for DW748 through DW1000; SW203; SW218; SW250; SW335 and SW344--use For SW500 use For SW468 use Hi-Shear Corporation 2600 Skypark Dr. Torrance, CA USA tel Tool Div. fax NUTPLATE DRILLMOTOR - MASTER ASSY

3 SERIES SERIES RPM 7000 RPM PART NUMBER Kinecheck II Ring, retaining ( ) Screw, set, nylon(10-32 x 1/4) note Housing Sub-assy Plate, by-pass, pump assy Seal, O-ring (2-008) Screw, btn schd(6-32 x 7/16) Plug, pipe soc (1/8 MP) Clamp and feed group Trigger valve assy. 1 1 BASIC HOUSING ASSY SERIES SERIES RPM 7000 RPM PART NUMBER Main air valve assy Air motor, offset vains, assy Pin, dowel (1/8 x 1/4 lg) Planetary adaptor, assy Bearing, ball Gear, pinion, output J-1302 Key, woodruff Gear, planetary, assy Insert, spindle Cage, assy., gear, planetary 1 1 NOTE: Basic Housing Assy. Description Housing Sub-assy. SERIES (600 RPM): Rear Rear DW SERIES (7000 RPM): Rear Rear DW BASIC HOUSING ASSY 2053

4 HOUSING SUB-ASSY PART NUMBER Cover (Standard)* Muffler Plug, lee (0.281) Plug, lee (0.187) Screw (6-32 x 1/4) (Standard)** Bearing, needle Housing,.688 rear Housing, 1.00 rear Housing, DW Plug, lee (0.125) Screen Tap-Lok insert Tap-Lok insert Bracket, Kinechek Screw, nylon modified 1 SPINDLE ASSY D dia: 5/16 1/4 3/16 PART NUMBER Pin, roll Collar, ret, spring (7/16 hex) Spring, compression Thimble, adjust (.600 O.D.) Spindle assy Spindle assy Spindle assy * Optional covers available: Backward exhaust, Side exhaust, Right hand exhaust; Left hand exhaust ** Use screws for optional covers , , and Hi-Shear Corporation 2600 Skypark Dr. Torrance, CA USA tel Tool Div. fax HOUSING SUB-ASSY SPINDLE ASSEMBLY

5 GEARS & GEAR CAP GROUP-MODEL IIB REAR SPINDLE SPACING Cap assy., gear Cap assy., gear Screw, soc head (10-32 x 1 1 /8) Screw, soc head (10-32 x 1) Gear assy., idler 4 4 GEAR CAP ASSEMBLY-MODEL IIB REAR SPINDLE SPACING Screw, bttn hd (8-32 x 1/2) Plate, lock, index Plate, lock, index Cap, gear, machined (.688) Cap, gear, machined (1.000) Bearing, ball Washer, gear, idle Pin, gear idler 4 4 GEARS & GEAR CAP GROUP-MODEL IIB GEAR CAP ASSEMBLY-MODEL IIB 2055

6 GEARS AND GEAR CAP GROUP-MODEL II REAR SPINDLE SPACING Cap, gear machined (.688) Cap, gear machined (1.00) Gear assy., idler Pin, gear idler Washer, gear, idle Bearing, ball J-235 Screw, cap (10-32 x 3/4) Screw, set, (10-32 x 1/4) Insert Insert Scew, bttn head (8-32 x 1/8) 1 1 SPINDLE ASSEMBLY - MODEL II 5/16 1/4 3/ Housing, bearing Screw, bttn head Bearing, ball Spindle assy Spindle assy Spindle assy Hi-Shear Corporation 2600 Skypark Dr. Torrance, CA USA tel Tool Div. fax GEARS AND GEAR CAP GROUP-MODEL II SPINDLE ASSEMBLY - MODEL II

7 CLAMP AND FEED GROUP Bulkhead assy Rod, piston, feed Bracket, feed control Rod-piston assy Seal, O-ring (Parker 2-031) Seal, O-ring (Parker 2-222) Seal, O-ring (Parker 2-112) Seal, O-ring (Parker 2-212) Ring, retaining ( ) Ring, retaining ( ) Screw, cap, sc. head (10-32 x 1 1/2) Washer, lock, int. (10) 1 TRIGGER ASSY Trigger, machined Screw, set (4-40 x 3/16 lg.) Pin, trigger Sleeve, trigger Pin, roll (1/16 x 3/4 ) Seal, O-ring (Parker 2-010) Seal, O-ring (Parker 2-009) Seal, O-ring (Parker 2-006) Spring, compression 1 CLAMP AND FEED GROUP TRIGGER ASSY. 2057

8 AIR MOTOR Plate, front Bearing Rotor, air motor Barrel, air motor Plate, rear Bearing Vane Seal, O-ring (Parker 2-209) Seal, O-ring (Parker 2-214) Spacer 1 MAIN AIR VALVE ASSY Piston Seal, O-ring (Parker 2-111) Seal, O-ring (Parker 2-112) Valve assy Spring Seal, O-ring (Parker 2-113) Adapter, inlet Hi-Shear Corporation 2600 Skypark Dr. Torrance, CA USA tel Tool Div. fax AIR MOTOR MAIN AIR VALVE ASSY.

drill point and thru spindle coolant systems positive mechanical depth stop

drill point and thru spindle coolant systems positive mechanical depth stop SPACEMATIC SPACEMATIC ULTRALITE ULTRALITE Model 1000II Model 2000 TM TM DRILLING MACHINES Standard Features Optional Features ergonomic design air pressure intensifier for increased thrust consistent clamp

More information

air pressure intensifier for increased thrust consistent clamp force min to max collet spacing ergonomic design

air pressure intensifier for increased thrust consistent clamp force min to max collet spacing ergonomic design Formerly Hi-Shear Tooling Official Distributor: SPACEMATIC Wm. Lees & Sons Ltd. United Kingdom Telephone: +44 (0) 1698 426662 Email: sales@ Website: ULTRALITE TM DRILLING MACHINES Model 1000II Standard

More information

Form No Parts List for: MODEL B HYDRAULIC PUMP GENERAL SECTION PG PG553-2UK FT600 PG554. PG120A Series Y70G Series. Sheet No.

Form No Parts List for: MODEL B HYDRAULIC PUMP GENERAL SECTION PG PG553-2UK FT600 PG554. PG120A Series Y70G Series. Sheet No. MODEL B HYDRAULIC PUMP GENERAL SECTION Parts List for: Form No. 100520 60208 PG553 65820 PG553-2UK FT600 PG554 FT700-001 PG554-LEAD FT700-002 PG554-2UK PG55A Series Y26G Series PG90A Series Y60G Series

More information

PHONE /

PHONE / WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / info@wescondsi.com 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over

More information

AIR HYDRAULIC PUMP SIDE VIEW

AIR HYDRAULIC PUMP SIDE VIEW Parts List for: form No. 101260 PA462 PA464 PA464-5R AIR HYDRAULIC PUMP SIDE VIEW 7 Basic Pump Ass'y See sheet 2 of 4. 1 6 5 2 4 Item Part No. Item Part No. No. No. Req d Description No. No. Req d Description

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL C ELECTRIC HYDRAULIC PUMP

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL C ELECTRIC HYDRAULIC PUMP SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031

More information

VALVE ASSEMBLY. Form No "A" "A" Parts List for: (1/4 N.P.T.F.-REF.) (1/4 N.P.T.F.-REF.)

VALVE ASSEMBLY. Form No A A Parts List for: (1/4 N.P.T.F.-REF.) (1/4 N.P.T.F.-REF.) Parts List for: Form No. 108100 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800)

More information

Form No , 9 5, 6. Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP. Max. Capacity: 10,000 PSI

Form No , 9 5, 6. Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP. Max. Capacity: 10,000 PSI Form No. 101249 Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP Max. Capacity: 10,000 PSI Air Motor Assembly See sheet 3 of 6 13 12 1 11 10 8, 9 Basic Pump Assembly See sheet 4 of 6

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.

More information

Form No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A

Form No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A Parts List for: Form No. 000339 RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW 3 9, 0 4 5 6 6 5 4, 3 9,0 SPX Hydraulic Technologies, Rockford, IL 609 USA powerteam.com

More information

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) Fig. Part Form A278F Date 10-00/B Page 1 of 6 4. 14309 Ring O 5. 14312 Ring

More information

PARTS LIST, PRESSURE CYLINDER

PARTS LIST, PRESSURE CYLINDER PARTS LIST, PRESSURE CYLINDER KEY QTY. PART NO. DESCRIPTION 1 1 306650 Valve sleeve (tension) 2 1 306651 Valve stem (tension) 3 1 306652 Valve sleeve (seal) 4 1 306653 Valve stem (seal) 5 1 306657 Catch

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800)

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS MODEL D300 SERIES MIXERS (INCLUDES MOTOR PARTS) ML-134258 ML-134261 D300T (Timed) D300C (Timed) PRIOR MLS COVERED IN THIS MANUAL ML-134211 ML-134213 ML-104421 ML-134114 D300T

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800)

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031 Parts List for: Form No. 108184 RSST-20 Internet

More information

ELECTRIC HYDRAULIC PUMP

ELECTRIC HYDRAULIC PUMP Form No. 100825 Parts List for: PE460A-50-220 PE460A-ABC ELECTRIC HYDRAULIC PUMP Motor Control Assembly See pgs. 4 & 5 of 5 Basic Pump Assembly See pg. 2 of 5 Sheet No. 1 of 5 SPX Corporation Rev. 2 Date:

More information

ELECTRIC HYDRAULIC PUMP

ELECTRIC HYDRAULIC PUMP Parts List for: Form No. 1000048 PE55TWP PE55TWP-220 MODEL D ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI See Back Sheet 5 of 8 1 13 2,3 11 OFF ON WARNING 6 4,5 0IL 7 VALVE DETAIL TORQUE SPOOL

More information

Form No Parts List for: MODEL B ELECTRIC HYDRAULIC PUMP. Maximum Capacity: 10,000 PSI PE55TWP-IBT-115. Sheet No. 1 of 8

Form No Parts List for: MODEL B ELECTRIC HYDRAULIC PUMP. Maximum Capacity: 10,000 PSI PE55TWP-IBT-115. Sheet No. 1 of 8 Parts List for: Form No. 1000457 PE55TWP-IBT-115 MODEL B ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI 1 2 3 7 SPX Hydraulic Technologies, Rockford, IL 61109 USA www.powerteam.com Made in USA 309219Rev7

More information

K&T Saw Shop or

K&T Saw Shop or 14-600080 MINI MAC 6A 05/73 to 12/73 IPL 89090 Page 1 of 12 Accessories www.ktoutdoor.com 14-600080 MINI MAC 6A 05/73 to 12/73 IPL 89090 Page 2 of 12 Accessories 84992 Kit - Reed muffler 85933 Kit - Spark

More information

Form No , 3 4, 5 VALVE DETAIL DIVISION UNEX CORPORATION. Parts List for: HYTORC-115 HYTORC-230 HYTORC MODEL D ELECTRIC HYDRAULIC PUMP

Form No , 3 4, 5 VALVE DETAIL DIVISION UNEX CORPORATION. Parts List for: HYTORC-115 HYTORC-230 HYTORC MODEL D ELECTRIC HYDRAULIC PUMP > Parts List for: Form No. 105548 DIVISION UNEX CORPORATION 333 STATE ROUTE 17 NORTH MAHWAH, N.J. 07430-9895 Tel: (201) 512-9500 Fax: (201) 512-0530 HYTORC-115 HYTORC-230 HYTORC-230-2 MODEL D ELECTRIC

More information

WS-2D-1 2 SPEED HEAVY DUTY WOOD SHAPER MODELS , , , , , PART NO Dated:

WS-2D-1 2 SPEED HEAVY DUTY WOOD SHAPER MODELS , , , , , PART NO Dated: 2 SPEED HEAVY DUTY WOOD SHAPER MODELS 43-435, 43-445, 43-454, 43-455, 43-459, 43-460 WS-2D-1 PART NO. 432-02-651-0040 Dated: 09-17-03 Page1/ WS-2D-1/DEB REPLACEMENT PARTS 54 432-02-628-0003 SWITCH/WING

More information

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B ) PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800)

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) Parts List for: Form No. 068 SPX Corporation 88 th Street Rockford, IL 609-699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 77-826 Fax: (800) 76-826 Order Entry: (800) -8 Fax: (800)

More information

CS4018 Chain Saw UT R Page 1 of 14 Carburetor - Muffler

CS4018 Chain Saw UT R Page 1 of 14 Carburetor - Muffler CS4018 Chain Saw UT-10736-R Page 1 of 14 Carburetor - Muffler CS4018 Chain Saw UT-10736-R Page 2 of 14 Carburetor - Muffler Ref # Part Number Qty Description 1 1 MUFFLER - Complete Not Used On This Model

More information

K&T Saw Shop or

K&T Saw Shop or 11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 1 of 12 Carburetor Assembly www.ktoutdoor.com 11-400060-02 TITAN 2100 08/92 to 10/92 IPL 211404 Page 2 of 12 Carburetor Assembly 1 224142-03 1 Carburetor

More information

Y08521 September 2014

Y08521 September 2014 Y0852 September 204 Contents How To Use The Illustrated Parts List... 3 FRONT BEARING COVER ASSY.... 4 FRONT CASE ASSY... 5 INPUT SHAFT ASSY... 7 INTERMEDIATE CASE ASSY... 8 LAYSHAFT ASSY.... 0 LRC ASSEMBLY...

More information

66cm Heavy-Duty Rear Bagger Lawn Mower

66cm Heavy-Duty Rear Bagger Lawn Mower Form Number 3360-820 Rev B 66cm Heavy-Duty Rear Bagger Lawn Mower Model No. 22200TE - 280000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number,

More information

HMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant

HMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant 0925202 HMD925 20v Power Feed with Coolant 0925302 HMD925 20v Type I plug, Power Feed with Coolant b a 5 HOOKS TO COOLANT INDUCER 8 7 9 29 3 0b 0a 0 36 23 8 7 3 2b 2a 2 a 7 Part / Serial Number Label 33

More information

Y07121 November 2015

Y07121 November 2015 Y072 November 205 Contents How To Use The Illustrated Parts List... 3 FRONT BEARING COVER ASSY.... 4 FRONT CASE ASSY... 5 INPUT SHAFT ASSY... 7 INTEGRATED AIR SYSTEM... 8 INTERMEDIATE CASE ASSY.... 0 LAYSHAFT

More information

Illustrated Parts List

Illustrated Parts List Illustrated Parts List ZY05289 March 202 Contents How To Use The Illustrated Parts List... 3 AIR SYSTEM... 4 CLUTCH ASSEMBLY... 5 CLUTCH SERVO ASSEMBLY... 6 FRONT BEARING COVER ASSY.... 7 FRONT CASE ASSY...

More information

Main Components Early Style

Main Components Early Style Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure

More information

Loader Backhoe Front Axle Parts 2WD & 4WD

Loader Backhoe Front Axle Parts 2WD & 4WD Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS

More information

245 Chain Saw UT Page 1 of 16 Air Filter & Handles & Oil Pump

245 Chain Saw UT Page 1 of 16 Air Filter & Handles & Oil Pump 245 Chain Saw UT-10631 Page 1 of 16 Air Filter & Handles & Oil Pump 245 Chain Saw UT-10631 Page 2 of 16 Air Filter & Handles & Oil Pump Ref # Part Number Qty Description 1 80870 1 SCREW- 10-32 x 3/8 2

More information

Super EZ Chain Saw UT Page 1 of 18 Tools And Accessories

Super EZ Chain Saw UT Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295

More information

K&T Saw Shop or

K&T Saw Shop or 14-400030-11 MAC 100 HD 03/88 to 02/89 IPL 22276-01 Page 1 of 10 Carburetor Assembly 14-400030-11 MAC 100 HD 03/88 to 02/89 IPL 22276-01 Page 2 of 10 Carburetor Assembly 1 224142-02 1 Carburetor Asy (WT

More information

Z-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler

Z-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler Z-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler Z-Force 60 KW 53AA5DBJ Page 2 of 57 Air Filter & Muffler Ref # Part Number Qty S/P/F Description 11011 KM-11011-7003 1 S CASE-AIR FILTER 11013 KM-11013-7009

More information

Super EZ Chain Saw UT Page 1 of 19 Carburetor

Super EZ Chain Saw UT Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 2 of 19 Carburetor 1 93203A 1 /P Repair Kit Includes items 1-16. 2 93203A 1 /P Repair Kit Includes items 1-16. 3 93203A

More information

1 MTD Dash Panel Support Brkt. 2 MTD Dash Panel 3 MTD Hex Bolt 5/16-18 x.75" Lg.* 4 MTD Bulb 5 MTD Hex AB-Tap

1 MTD Dash Panel Support Brkt. 2 MTD Dash Panel 3 MTD Hex Bolt 5/16-18 x.75 Lg.* 4 MTD Bulb 5 MTD Hex AB-Tap 1 MTD 16655 Dash Panel Support Brkt. 2 MTD 16656 Dash Panel 3 MTD 710-0118 Hex Bolt 5/16-18 x.75" Lg.* 4 MTD 725-0963 Bulb 5 MTD 710-0776 Hex AB-Tap Scr. 1/4 x.62" 6 MTD 725-1058 Socket 7 MTD 712-0267

More information

HYDROBURST HB3038, HB5058, HB80, HB125

HYDROBURST HB3038, HB5058, HB80, HB125 TM HYDROBURST HB3038, HB5058, HB80, HB125 Parts Manual HYDROBURST HB3038, HB5058, HB80 & HB125 s/n Part No. PM1251 INTRODUCTION HOW TO USE THE MANUAL This manual contains illustrations and parts list of

More information

365L (2001) Page 1 of 36 54" Deck Assembly

365L (2001) Page 1 of 36 54 Deck Assembly 365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting

More information

Carrier Transicold Diesel Engine CT4-91-TV (V1505) Service Parts List Rev A

Carrier Transicold Diesel Engine CT4-91-TV (V1505) Service Parts List Rev A Carrier Transicold Diesel Engine CT--TV (V0) Service Parts List -0 Rev A Service Parts List DIESEL ENGINE CT--TV (V0) CONTENTS INTRODUCTION... REPLACEMENT ENGINE PART NO.... ORDERING INSTRUCTIONS... GENERAL

More information

Models 820 and 840 2

Models 820 and 840 2 Models 820 and 840 2 Models 820 and 840 1 783-0250 Hood 2 738-0952 Shld. Bolt.375" Dia. x.5" 3 736-0175 Spr. Washer.265" I.D. x.562" OD 4 710-0751 Hex Bolt 1/4-20 x.62" * 6 7-0271 Hex Sems Nut 1/4-20 Thd.

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS MODEL D340 MIXER (INCLUDES MOTOR PARTS) D340 D340C ML-134254 ML-134257 PRIOR MLS COVERED IN THIS CATALOG D340 ML-134185 D340C ML-134188 D340 W/O Brake ML-104483 D340 W/Brake

More information

PARTS MANUAL COMMERCIAL GENERATOR REV 11/06

PARTS MANUAL COMMERCIAL GENERATOR REV 11/06 PARTS MANUAL COMMERCIAL GENERATOR PX7500 & PX7500e 0914-0206 REV 11/06 GROUP INDEX Group Name Page GENERATOR - PX7500 & PX7500e... 4 PIPE FRAME -RECOIL START... 6 PIPE FRAME - ELECTRIC START... 8 CONTROL

More information

For Discount Tecumseh Engine Parts Call or HH E Page 1 of 8 Engine Parts List #1

For Discount Tecumseh Engine Parts Call or HH E Page 1 of 8 Engine Parts List #1 HH60-105080E Page 1 of 8 Engine Parts List #1 HH60-105080E Page 2 of 8 Engine Parts List #1 1 34761 0 Cylinder Assy. (Cast iron liner) (2-5/8" 2 27652 0 Pin, Dowel 3 27642 0 Plug, Drain 4 27876B 0 Seal,

More information

Description Jacobs # RVI # Description RVI # Jacobs #

Description Jacobs # RVI # Description RVI # Jacobs # RING RETAINING 1023 5001834900 VALVE CAP 5000694887 19782 NUT HEX JAM 3/8-24 1026 5001834901 SCREW ROCKER ADJUST M10 5000694908 19781 WASHER PLAIN 1030 4559-1030 SEAL RING UPPER 5001834887 20229 TERMINAL

More information

136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck

136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42 Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 2 of 27 42" Mowing Deck 3 97600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously

More information

K&T Saw Shop or

K&T Saw Shop or 12-400062-04 TITAN 2310 12/93 to 09/96 IPL 211533 Page 1 of 11 Carburetor Assembly www.ktoutdoor.com 12-400062-04 TITAN 2310 12/93 to 09/96 IPL 211533 Page 2 of 11 Carburetor Assembly 1 224142-02 Carburetor

More information

MODEL D ELECTRIC TWO-STAGE HYDRAULIC PUMP

MODEL D ELECTRIC TWO-STAGE HYDRAULIC PUMP l e s i MADE IN U.S.A. FOR HYDRAULIC w i t h ANS I B4 0. 1 Parts List for: SPX Hydraulic Technologies 5885 11th Street Rockford, IL 61109-3699 USA powerteam.com Tech Services: +1 800 477 8326 Fax: +1 800

More information

Parts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle)

Parts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle) 80156458 Edition 5 May 2014 Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders G1 Series (Angle) Parts Information Save These Instructions G1 Series (Angle) Air Grinder, Die Grinder, Sander

More information

MODEL B ELECTRIC HYDRAULIC PUMP

MODEL B ELECTRIC HYDRAULIC PUMP DIVISION UNEX CORPORATION 333 STATE ROUTE 7 NORTH MAHWAH, N.J. 07430- Tel: (0) -00 Fax: (0) -030 Parts List for: Form No. 0 HYTORCQAS- MODEL B ELECTRIC HYDRAULIC PUMP "A" "A", 4 7 3, 4 Motor Control Assemblies

More information

K&T Saw Shop or

K&T Saw Shop or 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories www.ktoutdoor.com 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 2 of 19 Accessories 84453 Kit - Piston tool 69191 Kit - Pressure

More information

1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *

1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * -I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw

More information

Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.

Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. 2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G4 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - Rev. - A Date - 05/10 This illustration

More information

PARTS LIST. Reproduction. Not for. Models. Mfg. No. Description MH61900, Murray 9TP 24" Dual Stage Snowthrower, CE (2011)

PARTS LIST. Reproduction. Not for. Models. Mfg. No. Description MH61900, Murray 9TP 24 Dual Stage Snowthrower, CE (2011) PARTS LIST Models Mfg. No. Description 1696060 MH61900, Murray 9TP 24" Dual Stage Snowthrower, CE (2011) Manual Part No. Revision A Rev. Date: 6/20/2011 Table Of Contents PRODUCT COMPONENTS PAGES Handles

More information

This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.

This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. 2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G5 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - 54247 Rev. - A Date - 10/08 This

More information

G190 LT-145 (1992) Page 1 of 27 42" Mower Deck

G190 LT-145 (1992) Page 1 of 27 42 Mower Deck 132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119

More information

OPERATING INSTRUCTIONS AND SERVICE MANUAL

OPERATING INSTRUCTIONS AND SERVICE MANUAL OPERATING INSTRUCTIONS AND SERVICE MANUAL 55NAL--270-4 55NL--724-4 55RNL-2-LS-4- COMPLETE TOOL MODEL NO. CODE NO. 55NAL--270-4 20270 55NL--724-4 220724 READ SAFETY RECOMMENDATIONS 55RNL-2-LS-4-24089 BEFORE

More information

Drawing A Cylinder, Engine pan

Drawing A Cylinder, Engine pan Drawing A Cylinder, Engine pan 1 Drawing A Cylinder, Engine pan Reference Item number Qty Description 1 4180 020 1207 1 Cylinder with piston Ø 38 mm (33.2008) 2-9, 16 2 4180 025 2002 2 Valve 3 4180 025

More information

PUMP HOUSING 1 EA PLUG EXPANSION 4 EA REDUCING BUSHING 1 EA PIN DOWEL 4 EA PLUG

PUMP HOUSING 1 EA PLUG EXPANSION 4 EA REDUCING BUSHING 1 EA PIN DOWEL 4 EA PLUG MODEL 212J MICROVAC PP LOT NO. SC-78703 (7-99) AND FUTURE REF. DWG/ COMP. LIT. 1 606-727-001 PP HOUSING 1 EA 2 085-048-064 PLUG EXPANSION 4 EA 3 423-860-001 REDUCING BUSHING 1 EA 4 008-002-034 PIN DOWEL

More information

120SC SELF COLLETING DRILL

120SC SELF COLLETING DRILL Operation & Service Manual 83004 /0 0SC - 5 SELF COLLETING DRILL Houston Operation 7007 Pinemont Houston, TX 77040 Recoules Operation Zone industrielle - B.P. 8 Avenue Maurice Chevalier 7783 Ozoir-la-Ferriere

More information

THIS LISTING SHOWS ALL KIT COMPONENT PARTS, PLUS LISTS THE TOOL(S) THE KIT SERVICES.

THIS LISTING SHOWS ALL KIT COMPONENT PARTS, PLUS LISTS THE TOOL(S) THE KIT SERVICES. TO INFORM YOU PRODUCT SUPPORT BULLETIN # 288 TO: AUTHORIZED Portable Electric Tool SERVICE STATIONS DATE: JUNE, 1996 BRANCH OFFICE/SERVICE CENTERS, BRANCH MANAGERS REGIONAL MANAGERS, DISTRICT MANAGERS,

More information

Main Components Early Style

Main Components Early Style Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure proper oil flow, position

More information

1"354 $"5"-0(6& #364)$655&3 $ P Hc

1354 $5-0(6& #364)$655&3 $ P Hc 37000001 - P016-000520-11Hc 1 A130-001280 1 CYLINDER COMP 2 V100-000440 1 GASKET 3 900105-05016 4 BOLT, H.S. 5*16 5*16 4 A200-000620 1 INSULATOR 5 V103-000660 1 GASKET 6 V203-000580 2 BOLT,5 1 A030-000211

More information

2525 GARDNER ROAD, BROADVIEW, IL www x.c

2525 GARDNER ROAD, BROADVIEW, IL www x.c GARDNER ROAD, BROADVIEW, IL 0..0..00 www x.c G SERIES ELECTRIC STANDARD POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - TD0 Rev. - A Date - /0 This illustration is for reference purposes only. The

More information

Remanufactured Transmissions, Spare Parts, and Kits Catalog

Remanufactured Transmissions, Spare Parts, and Kits Catalog S5-42 Spare Parts - Gearbox Housing Group 01.010 1307 201 005 Main Housing 050/051/064/118 1307 201 076 Main Housing 056/057/059/100/102/103/108/109/110/111 1307 201 080 Main Housing 053/054/120 01.012

More information

Edition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions

Edition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions 80153232 Edition 10 March 2015 Air Grinder, Die Grinder and Sander G3 Series (Angle) Parts Information Save These Instructions G3 Series (Angle) Air Grinder, Die Grinder and Sander Exploded Diagram - Body

More information

Super 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber

Super 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 2 of 16 Carburetor Chamber 1 58319A 1 RING- Retaining 2 592301 1 COVER- Air filter 3 A70326 1 NUT- Cover

More information

PARTS MANUAL. RGV6100/6101 Generators. Models. PUB-GP1201A Rev. 12/99

PARTS MANUAL. RGV6100/6101 Generators. Models. PUB-GP1201A Rev. 12/99 PARTS MANUAL Models RGV6100/6101 Generators PUB-GP1201A Rev. 12/99 RGV6100 & RGV6101-2 - '99-12 GROUP INDEX Group Name Page GENERATOR GROUP - RGV6100... 4 GENERATOR GROUP - RGV6101... 6 FRAME for RECOIL

More information

iqpc912 PARTS MANUAL PC912PM v1

iqpc912 PARTS MANUAL PC912PM v1 iqpc912 PARTS MANUAL PC912PM v1 See Page 10 See Page 6 & See Page 12 See Page 2 See Page 16 See Page 1 See Page 1 See Page See Page 22 See Page 20 See Page 2 See Page 26 3 16 19 1 17 1 1 11 13 12 10 9

More information

STRIP NAILER. Model NR 90AD (E3) LIST NO. E016 38A 16A 37A 18A 41A 19A 40A 38A 46B 47A 76A 96 46A 75A 24A 23A 48A 68A 50A 32B 51A 32A 52A 53B 53A 54A

STRIP NAILER. Model NR 90AD (E3) LIST NO. E016 38A 16A 37A 18A 41A 19A 40A 38A 46B 47A 76A 96 46A 75A 24A 23A 48A 68A 50A 32B 51A 32A 52A 53B 53A 54A 5A 28A 48A 24A 29A 35A 59A 58A 57A 56A 55A 54A 53A 52A 46B 47A 50A 41A 37A 39 73A 79B 85A 81A 20 44 45 38 49 51A 34A 89A 506 501 505 1 2 3 4 6 7 8 9 10 11 12 13A 14 15 16 17 18 19 20 91 22 23 25 1 27 29

More information

COM AQUA TL PB 2100 REV02 PARTS MANUAL

COM AQUA TL PB 2100 REV02 PARTS MANUAL TL COM AQUA TL PB 2100 REV02 PARTS MANUAL INDEX LOWER FRAME WELDMENT... 3 SEAT WELDMENT... 3 GAS CYLINDER ASSEMBLY... 4 ARMREST FLIPUP ASSEMBLY... 5 ARMREST TOP ASSEMBLY LT... 6 ARMREST TOP ASSEMBLY RT...

More information

Parts Manual. RV Generator Set. HDCAA (Spec A D) HDCAB (Spec A D) English Original Instructions (Issue 9)

Parts Manual. RV Generator Set. HDCAA (Spec A D) HDCAB (Spec A D) English Original Instructions (Issue 9) Parts Manual RV Generator Set HDCAA (Spec A D) HDCAB (Spec A D) English Original Instructions 0-0 9 09 (Issue 9) Introduction This parts catalog applies to the standard generator sets listed below. Parts

More information

Main Drive Components

Main Drive Components Pipe and Bolt Threading Machine Main Drive Components 0 0 0 0 0 0 0 0 0 Pump Bracket Screw () Washer (0) Screw Centering Jaw Set Centering Head Back Plate Top Cover Die Head Decal (Not Shown) 00 Screw

More information

RK-33 BRUSH CUTTER - FIG 1

RK-33 BRUSH CUTTER - FIG 1 BRUSH CUTTER - FIG 1 BRUSH CUTTER - FIG 2 BRUSH CUTTER - FIG 3 BRUSH CUTTER - FIG 1 150 2090198 ANGLE TRANSMISSION 73.38 150-1 2820020 GEAR HOUSING 10.69 150-2 2200029 SPIRAL BEVEL GEAR 7.05 150-3 2200028

More information

Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N

Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated

More information

K&T Saw Shop or

K&T Saw Shop or 23-400061-04 PROMAC 2045 01/97 to Current IPL 211706 Page 1 of 19 Carburetor Assembly 2-Stage, With Swivel (WT441) www.ktoutdoor.com 23-400061-04 PROMAC 2045 01/97 to Current IPL 211706 Page 2 of 19 Carburetor

More information

MODELS MQ-D305/D306 SERIES DIAPHRAGM PUMPS (Honda, Robin and B&S Gasoline Engines)

MODELS MQ-D305/D306 SERIES DIAPHRAGM PUMPS (Honda, Robin and B&S Gasoline Engines) OPERATION AND PARTS MANUAL MODELS MQ-D305/D306 SERIES DIAPHRAGM PUMPS (Honda, Robin and B&S Gasoline Engines) Revision #2 (08/24/05) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES. MQ-D305/D306

More information

PARTS GUIDE Rev

PARTS GUIDE Rev HIGH CAPACITY OUTPUT STACKER (AS-1180C M8 STK) for the MACH 8 PARTS GUIDE Rev 09-17-14 This manual is intended solely for the use and information of Neopost USA, its designated agents, customers, and their

More information

B12 AST 250/SDH. 3 septembre 2002 WY025845

B12 AST 250/SDH. 3 septembre 2002 WY025845 AST 250/SDH 3 septembre 2002 WY025845 AST-250,SDH CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-0097A-90 SPARK PLUG CAP ASS'Y 1 002 018-06540-21 SPARK PLUG BPMR6A 1 003 001-0099F-90

More information

This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.

This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. 2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G3 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - 54246 Rev. - A Date - 10/08 This

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL F AIR HYDRAULIC PUMP

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL F AIR HYDRAULIC PUMP Form No. 08 SPX Corporation 88 th Street Rockford, IL 09-99 USA Internet Address: http://www.hytec.com Tech. Services: (800) 477-8 Fax: (800) 7-8 Order Entry: (800) 4-48 Fax: (800) 88-70 Parts List for:

More information

Description Jacobs # Mack # Description Mack # Jacobs #

Description Jacobs # Mack # Description Mack # Jacobs # NUT HEX JAM 3/8-24 1026 4559-1026 HSG ASSY RHS 983 181201050B 25543 WASHER PLAIN 1030 4559-1030 HSG ASSY LHS 983 181301030B 25542 TERMINAL 1040 4559-1040 HOUSING ASSY FRONT 963A 181401060B 28351 SEAL RING

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1106 020 2506 1 Crankcase (2) 2-11 2 0000 988 5217 1 Connector (2) 3 0000 988 5200 2 Connector (2) 4 1106 641

More information

Table of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (3)

Table of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (3) 03-2016 USA Table of contents FS 94, FS 94 C, FS 94 R, FS 94 RC 4 Crankcase, Cylinder 6 Rewind starter 8 Rewind starter ErgoStart/Easy2Start 10 Muffler, Shroud, Ignition system 12 Fuel tank 14 Air filter,

More information

file://c:\programdata\proquestms\partsmanagerpro\print\ ~13~11~5.html

file://c:\programdata\proquestms\partsmanagerpro\print\ ~13~11~5.html C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0 ~~~5.html Page of 6 8/9/0 C60TLRZ 00 / TOP COWLING 0 Yamaha Motor Corporation, U.S.A. All rights reserved. C60TLRZ 00 file://c:\programdata\proquestms\partsmanagerpro\print\8-9-0

More information

Group 3 Hydraulics 3-1

Group 3 Hydraulics 3-1 Group 3 Hydraulics Fig. 3-1, Hydraulic Schematic, AL-10531... 3-2 Main Hydraulic Pump Assembly, LL-299-1262... 3-4 Main control Valve Assembly, LL-3674-181 (4 Section)... 3-6 Spool Control Cover and Seal

More information

Drawing A Crankcase TS 410, TS 420 SCS

Drawing A Crankcase TS 410, TS 420 SCS Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 4238 020 2901 1 Crankcase 2-4 2 9503 003 0351 1 Grooved ball bearing 15x36.3x11 3 0000 953 6606 3 Stud 4 9630 951 1696

More information

Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. Pendants - pg.

Series. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown. Pendants - pg. Power Control Center PENDANT FUNCTION In event multiple buttons are depressed for seconds, the power pump will shutdown. TO RESTART PUMP Press the On button to restart. If problem persists, unplug the

More information

PARTS MANUAL EH25-2 ENGINE. Model. PUB-EP5714 Rev. 7/99

PARTS MANUAL EH25-2 ENGINE. Model. PUB-EP5714 Rev. 7/99 PARTS MANUAL Model EH25-2 ENGINE PUB-EP5714 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin

More information

Illustrated Parts Manual

Illustrated Parts Manual Illustrated Parts Manual Transmatic Lawn Tractor MODELS 70, 770 7, 77 7, 77 7, 77 MTD LLC, P.O. BOX CLEVELAND, OHIO -7 PRINTED IN U.S.A. FORM 7-0 (//00) Models 70 & 770 A 7 0 8 0 8 7 8 A 0 Models 70 &

More information

APT PAVING BREAKERS TOOL MAINTENANCE & REPAIR INFORMATION REMEMBER: PREVENTIVE MAINTENANCE WILL ASSURE MAXIMUM PERFORMANCE FROM ALL OF YOUR APT TOOLS.

APT PAVING BREAKERS TOOL MAINTENANCE & REPAIR INFORMATION REMEMBER: PREVENTIVE MAINTENANCE WILL ASSURE MAXIMUM PERFORMANCE FROM ALL OF YOUR APT TOOLS. PAVING BREAKERS AMERICAN PNEUMATIC TOOL TOOL MAINTENANCE & REPAIR INFORMATION Check BEFORE, DURING AND AFTER use of tools. FIELD OPERATION: Before: 1. Fill the oil reservoir with Air Tool oil or 10W equivalent.

More information

HC-450. Main Components. Hole Cutting Tool. NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. 1/12

HC-450. Main Components. Hole Cutting Tool. NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. 1/12 Hole Cutting Tool HC-0 Main Components Gib Screw () Warning Label 0 Screw, #0- x /" Lock Washer #0 0 Ground Spacer 0 Pinion () 0 Bearing () Split Roll Pin /" x "() Roll Pin, /" x /" () 0 0 Feed Shaft,

More information

39223 (140-SP) Rivet Nut setting Tool (Spin /Pull)

39223 (140-SP) Rivet Nut setting Tool (Spin /Pull) 39223 (140-SP) Rivet Nut setting Tool (Spin /Pull) This spin-pull tool automatically threads the fastener onto the mandrel. Press the trigger just once and the fastener is installed. Reverse the trigger

More information

JARVIS. Model JC II Air Powered Dehider

JARVIS. Model JC II Air Powered Dehider ] Air Powered Dehider U.S. PATENT NO. 5,122,092 EUROPEAN PATENT NO. 0438982 EQUIPMENT SELECTION............. Ordering No. TABLE OF CONTENTS......................... Page JC II Complete Blade Set Blade

More information

Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts

Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts 14.0 INTRODUCTION Tray Box Former This section lists and illustrates the replaceable assemblies and parts of the Tray Box Former as manufactured by Each parts list contains the component parts for that

More information

Chain Box and Knife. Item # Description Part Number 180-D & GS

Chain Box and Knife. Item # Description Part Number 180-D & GS Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152

More information

K&T Saw Shop or

K&T Saw Shop or 10-600012D MAC 10-10E CHAIN SAW 09/68 to 07/69 IPL 68857 Page 1 of 16 Accessories www.ktoutdoor.com 10-600012D MAC 10-10E CHAIN SAW 09/68 to 07/69 IPL 68857 Page 2 of 16 Accessories 68965 Manual - Owner's

More information

MODELS JG43, JG63, JG83 JG44, JG64, JG84

MODELS JG43, JG63, JG83 JG44, JG64, JG84 MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT

More information

PARTS CATALOG TRIMMER B530/U6(36)

PARTS CATALOG TRIMMER B530/U6(36) PARTS CATALOG TRIMMER 36000001 - P016-001440-13Bb 1. CYLINDER, MUFFLER 1 A130-001780 1 CYLINDER 2 V100-000450 1 GASKET CYLINDER 3 900105-05025 3 BOLT, H.S. 5*25 5*25 4 900105-05035 1 BOLT, H.S. 5*35 5*35

More information