SENSITIV T-TA. Boring and facing heads with manual and automatic feed
|
|
- Barnard Scott
- 5 years ago
- Views:
Transcription
1 SENSITIV T-T Boring and facing heads with manual and automatic feed 8
2 SENSITIV T-T General features The line of T-T boring and facing heads is provided with radial feed movement of the radial slide while the head rotates. The radial feed can be either manually operated by a crank or automatic. Via an interchangeable taper, these heads can be utilized on milling machines, boring machines, jig boring machine, radial drills and will allow to perform a wide range of machining operations such as facing, back-facing, boring, taper boring, grooving both on I or O. The T-T line of heads includes 4 models: T 100 provided with manual radial feed only; T 120, T 170 and T 220 provided with manual and automatic radial feed. wide range of toolholders is available for these heads to allow the widest range of machining operations. 10
3 Components and assembly NRE COMPONENTS 1. Stationary body 2. Rotating body 3. Interchangeable body 4. Feed crank 5. Quick return crank 6. utomatic feed crank 7. utomatic feed disengange button 8. Crank lock 9. Micrometric vernier scale 10. Centesimal vernier scale 11. Tool slide 12. Position stop 13. Toolholder clamp screw 14. Check rod 15. Transparent guard 16. Slide clamp screw 17. Toolholder check pins 18. Fork 11 SSEMBLY The SENSITIV are mounted on the machine via the taper. The check rod 14, inserted in fork 18 and locked onto the machine head, prevents the fixed body from rotating. For severe, heavy tooling, it is advisable to apply a flange to block the SENSITIV onto the sleeve or the head of the machine tool. The type of flange to be used depends on the machine model and on whether or not there are threaded holes in the front of the spindle or machine head. The flange may be easily built by the customer or supplied by ndrea.
4 SENSITIV T-T Supply INFO P102 T01L P103 P11 T02R P12 T03U The standard K01 Kit includes the following in a case: 1 T or T head; 1 transparent guard; 2 boring toolholders (P102, P103), 2 facing toolholders (P11, P12), 3 heads (T01, T02, T03), 10 carbide tools; 1 check rod; 1 set of wrenches; 1 instruction booklet; 1 warranty card. Other accessories are also available upon request. Fitting tapers are optional. SFETY The T-T are equipped with a transparent guard that ensures safe use. In addition, the toolholder slide is fitted with a safety device that prevents the toolholder from being released. 12 KIT K01 consisting of: 1 T../T.. 1 P P P 11 1 P 12 1 T 01L 1 T 02R 1 T 03U 10 Tools M20 T100 T 120 T 170 T 220 COE COE COE COE K KIT K03 consisting of: 1 P P P 11 1 P 12 1 T 01L 1 T 02R 1 T 03U 10 Tools M20 T T 120 T 170 T 220 COE COE COE K
5 rbor NRE T T 120 T 170 T 220 COE COE COE IN 69871/CT ISO ISO 7388 ISO MS-BT ISO ISO IN 2080 OTT T T 120 T 170 T 220 COE COE COE ISO ISO 40 inch ISO ISO 50 inch CHUCKING TOOL FOR MH RBORS MH' d1 T100 - T 120 COE MH d1 MH 50 T100 / T T 170 COE MH d1 MH 63 T T 220 COE MH d1 MH 80 T
6 SENSITIV T-T ccessories T and T heads are designed for applying modular toolholders and interchangeable fitting tapers. ll heads are made with dovetail guides on the slide for mounting the tool holders. This allows optimum positioning of the toolholders and ensures that they are very securely fastened in place. The toolholders have a tapered fitting for inserting the interchangeable heads available in right and left versions, screw-locking positive inserts and for round tools specifically made of carbide (M20). BORING TOOLHOLERS P102 P103 P104 P105 B 14 T T 120 T 170 T 220 ø min. COE B Ø min. P ,5 P , P ,5 P , P P P P P ,5 P P P FCING TOOLHOLERS P11 P12 P13 L COE L Ø P T T 120 P P P T 170 P P P T 220 P P
7 ccessories NRE HES T01L T02R T03U ø COE Ø T01 L T T 120 T02 R T03 U T01 L T 170 T02 R T03 U T01 L T 220 T02 R T03 U M B1 B2 B3 B ø L T 100 T 120 T 170 T 220 COE Ø L COE Ø L COE Ø L 1 08 M M M M M M M M M M M M M M M M M M B1 08 M B1 10 M B1 12 M B2 08 M B2 10 M B2 12 M B3 08 M B3 10 M B3 12 M B4 08 M B4 10 M B4 12 M
8 SENSITIV T-T ccessories HES 90 T21L T22R COE F T T 120 T 170 T 220 T21 L T22 R T21 L T22 R T21 L T22 R CCMT 09T CCMT 09T CCMT F HES T23L T24R 90 F COE F T T 120 T 170 T 220 T23 L T24 R T23 L T24 R T23 L T24 R CCMT 09T CCMT 09T CCMT HES T27L T28R F COE F T T 120 T 170 T 220 T27 L T28 R T27 L T28 R T27 L T28 R CCMT 09T CCMT 09T CCMT
9 ccessories NRE HES T25L T26R 45 F COE F T T 120 T 170 T 220 T25 L T26 R T25 L T26 R T25 L T26 R SCMT 09T SCMT 09T SCMT HES 17 S T41 06L T41 09L T42 06R T42 09R F COE F T T 120 T 170 T 220 T41.06 L T42.06 R T41.06 L T42.06 R T41.09 L T42.09 R T41.06 L T42.06 R T41.09 L T42.09 R X X X61 09T X X61 09T On right heads (R) left inserts (L) are used and vice versa p
10 SENSITIV T-T Technical data H G B P102 P103 Ø F P11 P12 P13 P104 Ø I P C E 18 TECHNICL T T 100 T 120 T 170 T 220 mm inch B mm inch C mm inch M6 M6 M8 M12 mm inch E mm inch F max P 11 standard mm inch P 12 standard mm inch P 13 mm inch G mm inch H P102 standard mm inch P103 standard mm inch P104 mm inch P105 mm inch I max. mm inch Radial trasverse mm inch Feed mm/ inch/ Feed mm/ inch/ Rapid return mm/ inch/ Max. speed RPM RPM Net weight kg pound Torque Nm Ib ft Motor power Kw hp
11 1 NRE 19
Index SENSITIV T-TA SENSITIV T-TA. GENERAL FEATURES p COMPONENTS AND ASSEMBLY p SUPPLY p ARBORS p ACCESSORIES p.
Index SENSITIV T-T Boring and facing heads with manual and automatic feed SENSITIV T-T Boring and facing heads with manual and automatic feed GENERL ETURES p. 120 COMPONENTS N SSEMBLY p. 121 SUPPLY p.
More informationBORING SYSTEMS INFO. 3 nd edition
BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll
More informationU-CENTER. NC heads for facing, boring, threading and radiusing for machining centres
U-CENTER NC heads for facing, boring, threading and radiusing for machining centres 8 U-CENTER General features o + 4 1 A U-CENTER U-CENTER boring and facing heads are designed for use on machines with
More informationU-TRONIC. Medium and large-sized NC heads for facing, boring, threading and radiusing
U-TRONI Medium and large-sized N heads for facing, boring, threading and radiusing 4 U-TRONI eneral features XS N X Y Z W U M= motor T= transducer T U TRONI M U T M W INTRF U-TRONI are medium and large
More informationIndex U-CENTER U-CENTER. GENERAL FEATURES p U-DRIVE p ASSEMBLY p SIZES p CHIP REMOVAL CAPACITY p SUPPLY p.
Index NC heads for facing, boring, threading and radiusing for machining centres NC heads for facing, boring, threading and radiusing for machining centres GENERL FETURES p. - U-RIVE p. SSEMBLY p. SIZES
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationRadial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationBT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95.
BT Shank Tools BT30.................................................................................E2 E18 BT40................................................................................E20 E60 BT50................................................................................E62
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationTURNING AND MILLING IN ONE SET-UP
TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationPINZBOHR BORING SYSTEM. Index
Index - Rough heads - Finish heads - Micro boring heads & boring bars - A4016 micro heads & 16mmØ shank boring bars - Key to select arbors - Arbors programme - Extensions & reducers - Large diameter boring
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationBRAKE SERVICING MACHINES CARS LINE
BRAKE SERVICING MACHINES CARS LINE PROBLEM S SOLU Problems that can arise during the braking, as strong vibrations and VIBRA CLAMPING ON THE BRAKING CALLIPER DISJOINT AXIAL DRIVE MOVEMENT The clamping
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationCreusen Professional Floor-standing/Bench Drill Presses 8000
Creusen Professional Floor-standing/Bench Drill Presses 8000 A series of floor-standing and benchtop drill presses for the professional user featuring the qualitythat you can expect from Creusen. The models
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationVýhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationIndustrial Drill Chucks & Live Centers
Since 1957 Industrial Drill Chucks & Live Centers 2 From our headquarters in the province of Barcelona, Spain, Llambrich Precision, S.L. has been designing and manufacturing drill chucks and machine tool
More informationDV Shank Tools DV40...F2 F37 DV50...F38 F71
DV Shank Tools DV40..................................................................................F2 F37 DV50.................................................................................F38 F71
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationMULTI-TASK MACHINING. Tooling possibilities Products
Content Tooling possibilities Products Toolholder overview Coromant Capto multi-functional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex SL mini-turret CoroTurn P - Coromant
More informationPneumatic & hydraulic drive options available. Chucking system can be removed to allow the flange facer to be facemounted.
FF8200 FLANGE FACER A HEAVY - DUTY FLANGE FACER WITH FACING AND MILLING CAPABILITIES Rugged Machine Design Large, heavy duty construction-grade bearings provide powerful, rigid performance throughout the
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationSpindle & Taper Care Products
Spindle & Taper Care Products Swiss Precision Tools UltraSonic Cleaner Ultrasonic Cleaner Ultrasonic Cleaning Solution US-40SE US-815CLEAN Heavy duty stainless steel double-wall design provides highly
More informationPERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationSP - SURFACE GRINDING AND MILLING MACHINES. AZ spa MACHINE TOOLS. SP1300 SP1600 SP2000 version M-Y-PLC
SP - AZ spa MACHINE TOOLS SP1300 version M-Y-PLC 0.2 Variable speed - on the table movement - on the head movement - on the grinding wheel rotation Automatic and programmable working cycle SP1300 PLC PLC
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationu-tec UT Our change system, that makes EVERYTHING possible
u-tec UT Our chnge system, tht mkes EVERYTHING possible Terms nd conditions: You will find them on our website www.heimtec.com Home/Imprint/Terms nd Conditions This ctlogue, including ll its prts, is protected
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationSpindles and converters
High Speed Spindles F A C T S A B O U T Spindles and converters SPINTEC spindles are designed for clients with high demands on accuracy and reliability of service. The spindles are manufactured with the
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationVERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
More informationOperation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses
More informationTaladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS
RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationHSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationAutomatic Drilling and Tapping Units
Automatic Drilling and Tapping Units Contents Page Automatic drilling and tapping units... 25 Dimension sketches... 23 Introduction More mechanization in your drilling operations Simple and cost effective,
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28
More informationModular Spindle Technology. Productivity Solutions.
Modular Spindle Technology Productivity Solutions Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team and Win for the company. WIN
More informationHCG - HORN Catalog Guide
Product line Bore Ø 217 264 S274 S223 S224 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation Type HCG - HORN Catalog Guide INTERNAL
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationMULTI-TASK MACHINING. Tooling possibilities Products
Content MULT-TASK MACNNG MULT-TASK MACNNG Tooling possibilities Products Tool holder overview Coromant Capto multifunctional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationArbours for PSC Polygon Shank Tooling
Arbours for Polygon Tooling CAT V-FLANGE to Taper CV 40 Designation L L1 kg SPECIAL CV40ADB--1.57 1.57.827.95 CV40ADB-50-1.97 50 1.97 1.22 1.00-69871 -AD Taper to Designation L L1 kg SPECIAL 40 69871-A40-50-1.18
More informationCNC gantry-type machining center. PSD-Mill CNC
gantry-type machining center PS-Mill T e c h n i c a l a t a s h e e t xtremely robust and solid base frame provides great rigidity, stability and vibration-free work even with heavy duty cutting Rigid
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationPIN VICES 02 2 DRILL 02 9 CUTTING BROACHES SMOOTHING BROACHES 02 13
02 PIN VICES 02 2 DRILL 02 9 CUTTING BROACHES 02 10 SMOOTHING BROACHES 02 13 PIN VICES i Pin vices are used to firmly hold items such as winding stems, cutting and smoothing broaches, drills, taps, wires,
More informationCAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
More information> MADE IN GERMANY. Powerful solutions passionate people. Range of Tools. Drilling machine KDXS
> MADE IN GERMANY Powerful solutions passionate people Range of Tools Drilling machine KDXS Range of tools Drilling Machine KDXS Productivity and quality are always results of optimal coordinated machines
More informationFEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES
FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES The Supertec GU CNC series are designed for grinding complex workpieces in small and large batch productions as well as individual parts. It is built
More informationHigh Frequency Spindles
High Frequency Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Table of Contents Introduction
More informationBrake Lathes and Accessories
Brake Lathes and Accessories Choose a Lathe BL 8922L Essential Features: Positive rake tooling yields one pass finish with single cut every time Machines most drums, flywheels, and all types of rotors
More informationLight, Portable, and Powerful - Designed to get the job done FAST!
FF5000 FF5000 PORTABLE PORTABLE FLANGE KEY MILL FACER F E A T U R E S S E T U P & O P E R A T I O N C O M P O N E N T S & A C C E S S O R I E S T E C H N I C A L D A T A Light, Portable, and Powerful -
More informationMULTITURRET BAR TURNING B436Y2
MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model
More informationSpecial Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
More information[ means: Made in the Heart of Europe at a great price. Vertical turning machines VT 400, VT 250, VT 160 with integrated automation
[ E[M]CONOMY] means: Made in the Heart of Europe at a great price. Vertical turning machines VT 4, VT 25, VT 16 with integrated automation EMCO VERTICAL VT 4 The new VT 4 for chuck parts up to 4 mm completes
More informationUniport CNC Portal Machining Centre with Pallet Changer.
Uniport 6 CNC Portal Machining Centre with Pallet Changer www.unisign.nl Uniport 6 UNISIGN The economical solution to flexible manufacturing! Since the introduction of the UNIPORT portal machining centres,
More informationwe cut faster Vertical Machining Center MV204II series
we cut faster Vertical Machining Center MV24II series From : October 24 we cut faster Maximum capacity and performance in a very compact working envelope 1 OUTLING MV24II series P & PD models FANUC 18iM-B
More informationIntroduction 3. Motorized Milling, Drilling and Tapping Spindles 5. Motorized Grinding Spindles 6. Motorized Air Bearing Spindles 8
High Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Contents Introduction 3 Motorized Milling,
More informationHAFCO METALMASTER HM-48. Mill Drill - Geared & Tilting Head with DRO. (X) 540mm (Y) 185mm (Z) 410mm. Product Brochure
Product Brochure M126D HAFCO METALMASTER HM-48 Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Page 1 of 6 Specifications & Prices are subject to change without notification -
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationClamping Nuts. Sealing Disks Coolant Flush Disks. Clamping Nuts. Sealing Disks (DS) Coolant Flush Disks (KS)
Clamping Nuts Sealing Disks Coolant Flush Disks Clamping Nuts.01 Features and Benefits.02 Assembly Instructions.0 Hi-Q/ER Standard Nuts.06 Hi-Q/ERC Standard Coolant Nuts for DS and KS Disks.08 Hi-Q/ERC
More informationDriven Toolholders for HAAS Machines
riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool
More informationHCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072
More informationHigh Speed Jet Spindle
1/28 High Speed Jet Spindle 2/28 High speed jet spindle TaeguTec has launched a revolutionary new high-speed spindle developed for applications using high RPM for small diameter tools that can be used
More information