Clamping Tools

Size: px
Start display at page:

Download "Clamping Tools"

Transcription

1 Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves Extension pieces Tap wrench Tool holder Holder sets Arbors Die stock Guides for dies Lathe centre Exchangeable chuck collets Live lathe centres Lathe centre attachments Face driver Driving plate Sleeves Turning and lathe chucks Recessing attachments Hollow spindle stops Top jaws Tenons Spare jaws T-Slot Nuts and Accessories Clamp and Accessories Bench Vice and Jaws NC compact spanners Multiple clamping systems Permanent-Magnetic Camping Plates Round Chucks Demagnetising tools Vertical collet vices Three-jaw lathe chuck Dividing Units Rotary tables Precision micrometer tables

2 Our suppliers for catalogue-group : 0 / m $ O l e DIACATOR * Haimer W ; Mimatic e 0 & 8 d ä

3 Three-Jaw Drill Chucks 8 Prima With gear rim and key, jaws and key hole hardened Heavy-duty industry type. With tapered mounting hole in compliance with DIN 38. For clockwise and counterclockwise operation. For stationary and manual electric hand drills Industrial type Mainly for manually operated drilling machines. For clockwise and counterclockwise operation. Clamping tools Capacity Internal taper Outside Ø wrench size mm DIN 38 mm 0,5-4,0 B 10 4,0 S ,5-6,5 B 1 9,5 S ,5-6,5 B 10 9,5 S ,5-8,0 B 10 9,5 S ,5-8,0 B 1 9,5 S ,8-10,0 B 1 34,5 S A 106 1,0-10,0 B 16 4,8 S A 109 1,5-13,0 B 1 4,8 S A 107 1,5-13,0 B 16 4,8 S A 111 1,0-16,0 B 18 56,5 S ,0-16,0 B 16 50,0 S ,0-0,0 B 65,0 S Three-Jaw Drill Chucks 8 With gear rim and key, jaws and key hole hardened , and for clockwise and counterclockwise operation (through-hole) Prima Industrial type with threaded mounting hole. For clockwise operation of manually operated electric hand drills and electric impact drills Prima-Mat Industrial type with Threaded mounting hole and Eccentric clamping force safety device. For electric impact drills with higher impact frequency. Capacity Mounting hole Outside Ø wrench size mm mm 0,5-8,0 3/8 inch x 4 9,5 S ,8-10,0 3/8 inch x 4 34,5 S A 107 0,8-10,0 1/ inch x 0 34,5 S A 109 1,5-13,0 1/ inch x 0 4,8 S A 110 1,5-13,0 1/ inch x 0 4,8 S A 111 1,5-13,0 1/ inch x 0 4,5 S AT 101 3,0-16,0 5/8 inch x 16 50,0 S 3T 10 3,0-16,0 M 18 x,5 50,0 S 3T Spare Keys For drill chucks with gear rim Size D L 1115 mm mm S S A S AT S S 3T S

4 Drill chuck 1118 Precision Drill Chucks with Gripping Force Retention Thanks to its special construction suitable for highest torque values (chucking forces). Strict quality control guarantees a true-running accuracy of 0,05 mm. Thanks to clamping force amplification the chucking force is doubled. Particularly suitable for machining centres, NC and CNC machines. For clockwise and counterclockwise operation Clamping range Internal taper Outside Ø Torque 1118 mm DIN 38 mm kp/cm 0-13 B 16 51, Industrial type. Self-chucking, keyless. Clamping and unclamping by hand. Only for clockwise operation. Quick-Action Three-Jaw Drill Chucks 110 Capacity Internal taper Outside Ø Length mm DIN 38 mm mm 1-10 B 1 36,1 76, B 16 50,9 114, B 18 51,0 114, Supra Self-chucking, keyless. For clamping and unclamping by hand. Chuck tightens automatically during drilling. Only for clockwise operation. Quick-Action Three-Jaw Drill Chucks 11 Lightweight Industrial type, with tapered mounting hole in compliance with DIN 38. Mainly for manually operated drilling machines Heavy-duty industry type, with tapered mounting hole in compliance with DIN 38. For upright drilling machines. B18 V shortened by 7 mm. B16 V shortened by,5 mm. 113 Standard-duty type, with threaded mounting hole. For electric hand drills. Capacity Internal taper Threaded mounting hole Outside Ø Length mm DIN 38 mm mm 0-6,5 B 10 3,0 65, ,5 B 1 3,0 65, ,0 B 1 35,8 73, ,0 B 1 40, 86, ,0 B 16 40, 89, ,5-10,0 1/" x 0 35,8 73, ,5-10,0 3/8" x 4 35,8 73, ,0-13,0 1/" x 0 46,0 101, ,0-13,0 B 16 46,0 101, ,0-13,0 B 16 V 40, 8, ,0-16,0 B 16 V 46,0 106, ,0-16,0 B 18 V 51,0 106, ,0-16,0 5/8" x 16 46,0 97,

5 115 8 Supra ST Self-chucking, keyless. Chuck tightens automatically in proportion to cutting force. Gripping force retains even under heavy-duty conditions. With clamping force retention. For clockwise and counterclockwise operation. Quick-Action Three-Jaw Drill Chucks Clamping tools 115 B16 V shortened by,5 mm. Clamping width Internal taper Threaded mounting hole Outside Ø Length 115 mm DIN 38 mm mm 0,5-10 B 1 40,0 75, ,5-10 1/ inch x 0 40,0 73,7 30 1,0-13 1/ inch x 0 4,8 83, ,0-13 B 16 V 4,8 89, Spiro Precision type, self-chucking, keyless. Pointed sleeve shape, high true-running accuracy, hardened wear parts. Thanks to automatic re-chucking during drilling, particularly suitable for high rotational speed applications on electric hand drills, upright drilling machines and special drilling units. Quick-Action Three-Jaw Drill Chucks Additionally with gripping force retention. For clockwise and counterclockwise operation B18 V shortened by 7 mm. Capacity Internal taper Outside Ø Length 116 mm DIN 38 mm mm 0-4,0 B , ,5 B , ,5 B , ,0 B , ,0 B , ,0 B , ,0 B , ,0 B , ,0 B 18 V , ST B , ST B , Force transmission with fine thread, chucking sleeve made of plastics, holding fixture made of steel, high true-running accuracy. With hexagonal end for mounting onto the spindle. For clockwise and counterclockwise operation. For rechargeable battery drills and electric hand drills. Keyless Drill Chucks (Plastics) 117 Extra, through-hole, with holding ring. 118 Extra RV, with radial locking, through-hole, with holding ring, impact-proof. Chucking capacity 1,5-13 mm jaws with carbide chucking bevel Clamping width Mounting hole Outside Ø max. machine Power/W mm mm no. 117 no ,0-10 3/8 inch x 4 4, ,0-10 1/ inch x 0 4, ,5-13 3/8 inch x 4 4, ,5-13 1/ inch x 0 4,

6 Drill chuck Fine Drilling Aids Chuck-Ejector Forks Chuck Arbors 1130 Keyless Drill Chucks (Metal) 8 Extra-RV, with radial locking, chucking sleeve made of Metal, with self-start protection and hexagonal end for mounting and removing from the spindle. For clockwise and counterclockwise operation. For hand drills with rechargeable battery and electric screwdrivers and hand drills Through-hole Through-hole. Jaws with carbide chucking bevel No through-hole. Jaws with carbide chucking bevel Clamping width Mounting hole Outside Ø max. machine power 1130 mm mm W 1,0-10 3/8 inch x 4 4, ,0-10 1/ inch x 0 4, ,5-13 1/ inch x 0 4, ,5-13 1/ inch x 0 4, / Keyless, clamping and unclamping by hand, chuck tightens automatically during drilling. Only for clockwise operation. All wear parts are case-hardened, ground and replaceable. 100 % concentricity test with different taper plug-diameters at different measuring heads based on DIN ISO High-Performance Three-Jaw Drill Chucks SBF 1151 SBF Super-drill chuck, Standard version. B 18 = inside taper shortened by 7 mm With vernier for presetting NCBF Special type, with clamping guard. For quick-braking spindles of NC, CNC machines, etc. B 18 = inside taper shortened by 7 mm. 115 Clamping width Internal taper D L 1 L mm DIN ISO 39 B mm mm mm 0-1,5 B ,0 37, ,0 B ,0 47, ,0 B ,0 61, ,0 B ,0 61, ,5 B ,5 68, ,5 B ,5 68, ,0 B ,0 77, ,0 B ,0 91, ,0 B ,0 91, ,0 B ,5 103, ,0 B ,5 109, ,0 B ,5 109,

7 Clamping tools 1155 Fine Drilling Aids / With centring pivot B 6 for drill chuck cat.-no , fine drilling aid without drill chuck, drilling depth = 0 mm. A spring-loaded system returns the chuck to the starting position. For highly accurate drilling of very small holes by hand, also suited for large machines Shank Ø D Ø d L 1 L 1155 mm mm mm mm 13 mm Ø MT Chuck-Ejector Forks / For easy separation of the chuck from its mount. Prevents damage to spindle or chuck for B taper a b c d e 1160 mm mm mm mm mm B , B 10, B ,0 13, B 16, B ,7 18, Chuck Arbors With taper in compliance with DIN 38, for mounting of chucks. Hardened and ground MT/drill chuck 1170 Taper 1/B /B 1 0 1/B /B /B 1 11 /B 16 1 /B MT/drill chuck 1170 Taper 3/B 1 0 3/B /B 18 3/B 3 4/B /B /B Chuck Arbors With mounting taper in compliance with DIN ISO 39 B, with straight shank. Precision guiding with a true-running accuracy small equal to µm Mounting taper Ø x Length 1177 mm B 1 10 x B 16 1 x B x B x

8 Short chucks. Tool adapters in compliance with DIN Shanks for machining centres and NC machines. Alloyed case-hardened steel, min. tensile strength 950 N/mm. Taper angle tolerance more exact than AT3. Case-hardened 60- HRC. Working surfaces ground. DIN part 1. Shape A: without through-hole, Shape AD: with through-hole for central coolant feed, Shape AD/B: with through-hole for central coolant feed and boreholes at the flange for lateral coolant feed, Shape B: with boreholes at the flange for lateral coolant feed. ST d1 G d5 H7 d max d3 l1 l l3 l4 l5 l6 d6 e mm mm mm mm mm mm mm mm mm mm mm mm 30 31,75 M ,0 47,8 16,4 19,0 15,0 5, ,45 M ,55 68,4,8 5,0 18,5 8, ,85 M ,5 101,75 35,5 37,7 30,0 11, Short type, wear parts hardened and ground. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chucks 100 Taper Clamping range L D ST mm mm mm 30 1, , , Short Chucks AKL / 100 % concentricity tested, based on DIN ISO 10888, worm gearing for high chucking forces. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Draw-in bolts see cat.-no Other balancing grades available on request. ULTRA with true-running accuracy less or equal to 0,015 mm available on request Taper Clamping range A D1 D L1 L 1185 ST mm mm mm mm mm mm 40 0, , , ,

9 Short type, wear parts hardened, high true-running accuracy. Wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chucks Draw-in bolts see cat.-no Fine balancing up to rpm available on request. Clamping tools 1190 Taper Clamping range D L L 1 max ST mm mm mm mm 40 1, , Short type, wear parts hardened, clamping range 1-16 mm. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chuck 1-16 mm Draw-in bolts see cat.-no Taper Clamping range A D ST mm mm mm Short type, wear parts hardened. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chucks Draw-in bolts see cat.-no Taper Clamping range A D E 10 ST mm mm mm mm 40 0, ,0 48, , ,0 51, Ü Short, sturdy, and slim design. High chucking forces thanks to gear reduction, high precision and truerunning accuracy. Incl. of wrench with T-handle for high power. Precision Short Chucks For clockwise and counterclockwise operation. Draw-in bolts see cat.-no Taper Clamping range l 1 d 1 l 106 ST mm mm mm mm 40 1, , , , , , , , , , , ,

10 Short chucks Tapping Chucks Collet chucks 11 3 Extremely short type, high true-running accuracy. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. High-Performance Precision Short Chuck Draw-in bolts see cat.-no Taper Clamping range A D E 11 ST mm mm mm mm 40 0, , , , , , , , Extremely short type, high true-running accuracy. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Precision Short Chucks Draw-in bolts see cat.-no Taper Clamping range A D E 115 ST mm mm mm mm 40 0, , , , , , , , O WFLC. Precision version with length compensation in response to compression and tension. Quick-Change Tapping Chucks 1450 Quick-change sleeves see cat.-no Draw-in bolts see cat.-no Taper for taps suitable Length compensation L D D 1450 ST drill inserts/size compr./tension mm mm mm mm 40 M 3 - M 1 1 7,5/7, M 6 - M 0 10,0/10, M 8 - M 0 10,0/10, M 14 - M ,5/17, With Length compensation in response to compression and tension. Quick-Change Tapping Chucks Draw-in bolts see cat.-no Quick-change sleeves see cat.-no Taper for taps suitable Length compensation L D D 1456 ST drill inserts/size compr./tension mm mm mm mm 40 M 3 - M 1 1 9,0/9, M 6 - M 0 15,0/15, M 14 - M ,0/4, M 3 - M 1 1 9,0/9, M 6 - M 0 15,0/15,

11 ER Collet Chucks Set Set consists of: 1 high-performance drilling and milling chuck 3-6 mm, chucking capacity type ER 40, 1 ea. collet, slit in two planes, type 47 E, 4 / 5 / 6 / 8 / 10 / 1 / 14 / 16 / 18 / 0 / / 4 / 5 mm Ø, and wrench. in plastic case. Shank ST plastic case, empty 107 Clamping tools ER Collet Chucks Precision version. External and internal taper ground, high true-running accuracy. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collets sets see cat.-no. 1519, collets see cat.-no and Draw-in bolts see cat.-no Fine balancing G, rpm, stainless coating. With Balluf-Chip borehole Balanced G 6, rpm Taper Size Clamping range Collets A D ST mm mm mm 30 ER 3-0 ER 3/470 E ER ER 16/46 E L ER ER 16/46 E XL ER ER 16/46 E ER 5-16 ER 5/430 E L ER 5-16 ER 5/430 E XL ER 5-16 ER 5/430 E ER 3-0 ER 3/470 E L ER 3-0 ER 3/470 E XL ER 3-0 ER 3/470 E ER ER 40/47 E L ER ER 40/47 E XL ER ER 40/47 E ER ER 16/46 E L ER ER 16/46 E ER 5-16 ER 5/430 E L ER 5-16 ER 5/430 E XL ER 5-16 ER 5/430 E ER 3-0 ER 3/470 E L ER 3-0 ER 3/470 E XL ER 3-0 ER 3/470 E ER ER 40/47 E L ER ER 40/47 E XL ER ER 40/47 E ER Collet Chucks slim Clamping nut fine balanced for HSC, ER11 throughhole core-drilled, after the hardening, the shank was turned once more. With Balluf-Chip borehole. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collets sets see cat.-no. 1519, collets see cat.-no and Draw-in bolts see cat.-no HSC 1500 Taper Size Clamping range Collets A D ST mm mm mm 40 L ER ER 11/4008 E XL ER ER 11/4008 E L ER ER 16/46 E XL ER ER 16/46 E L ER ER 5/430 E XL ER ER 5/430 E

12 Chuck extensions Collet chucks 1515 ER Chuck Extensions Cylindrical tool holder with Weldon shank, smallest dimensions. Extension of Weldon mounts and/or collet chucks Clamping range Shank Ø d Collets L D 1515 mm mm mm mm ER 11/4008 E ER 16/46 E ER 0/48 E Collet chuck Centro P * External and internal taper ground. Concentricity and repeatability 0,003 mm (with GER-HP collets). Concentricity and repeatability 0,006 mm (with GER collets). Clamping nut not included. For high-precision clamping of tools with straight shank, without concentricity and clamping force loss, up to shank tolerance h Slim design Taper Size Clamping range Collets Dimension D Dimension A Insertion depth Insertion depth 1507 ST mm mm mm E* mm F** mm 40 CP ER 16/46 E L CP ER 16/46 E XL CP ER 16/46 E CP 5-16 ER 5/430 E L CP 5-16 ER 5/430 E XL CP 5-16 ER 5/430 E CP 3-0 ER 3/470 E L CP 3-0 ER 3/470 E XL CP 3-0 ER 3/470 E CP 3-0 ER 3/470 E L CP 3-0 ER 3/470 E XL CP 3-0 ER 3/470 E * Dimension E for tool shanks less than 16 mm ** Dimension F for tool shanks bigger than 16 mm Collets with square drive are not suitable for taps. Clamping nuts and wrench see cat.-no GER-HP collets see cat.-no GER collets see cat.-no Draw-in bolts see cat.-no Mely slim design Taper Size Clamping range Collets Dimension D Dimension A Insertion depth E ST mm mm mm mm 40 CP 11 M 1-7 ER 11/4008 E CP 11 M 1-7 ER 11/4008 E * Use clamping nuts Centro P (cat.-no and ) only in conjunction with roller spanners (cat.-no ) and/or roller bearing heads (cat.-no ). Accessories for Collet Chucks Centro P Miniature clamping nut Standard clamping nut Standard clamping nuts for sealing discs Size for Ø D collets mm HPC 11 M ER 11/4008 E HPC 16 ER 16/46 E HPC 5 ER 5/430 E HPC 3 ER 3/470 E HPC 16-DI ER 16/46 E HPC 5-DI ER 5/430 E HPC 3-DI ER 3/470 E Clamping nuts for sealing discs Roller spanner Torque roller bearing heads

13 Roller clamp Size For Clamping nut RO 30 HPC 16 0 RO 40 HPC 5 04 RO 50 HPC 3 06 Roller bearing heads Size For Insert mounts Clamping nut mm DRO 30 HPC 16 9 x 1 30 DRO 40 HPC 5 14 x DRO 50 HPC 3 14 x * Vulcanised sealing discs up to 80 bar. 0,5 mm clamping Ø extension (+0,4/-0,1). Not suitable for other sealing disc systems! Sealing discs with 0,5 mm increments available on request. Sealing Discs for ER Clamping Nuts Centro P For type HPC 16-DI D x L 1,6 x mm For type HPC 5-DI D x L 0, x mm For type HPC 3-DI D x L 6, x mm Clamping tools for HPC 16-Di for HPC 5-Di for HPC 3-Di Size = clamping Ø mm OZ Collet Chuck Set Set consists of: 1 drilling and milling collet chuck - 5 mm clamping range, 1 ea. collet type 46 E 4 / 6 / 8 / 10 / 1 / 14 / 16 / 18 / 0 / / 4 and 5 mm Ø and hook wrench. In plastic case. for HPC 16-Di for HPC 5-Di for HPC 3-Di Size = clamping Ø mm Shank ST plastic case, empty OZ Collet Chucks External and internal taper ground, ball-bearing mounted union nut. Incl. of clamping nut. For the clamping of tools with straight shank in collets DIN ST 30 is delivered in the AD version. Collets see cat.-no Draw-in bolts see cat.-no Taper Clamping range For collets A D 1543 ST mm mm mm E E E E E

14 Power chucks Hydro expansion chucks Reduction sleeves Shrinking chucks 1577 Power Chucks 0 Clamping nut with needle roller cage, robust design, simple in presetting and application. High true-running accuracy, torque transmission and stability. Thanks to reductions, usable from 3-3 mm. incl. of clamping nut. For clamping tools with straight shank. Also suitable for clamping Weldon shanks. Particularly suited for roughing. Reduction sleeves see cat.-no Wrench see cat.-no Draw-in bolts see cat.-no Taper d D A L 1577 ST mm mm mm mm Taper d D A L 1577 ST mm mm mm mm High true-running accuracy and torque transmission. Low maintenance thanks to enclosed clamping system. Material N/mm tensile strength, hardened (5+ HRC). Max. coolant pressure 80 bar, axial length adjustment 10 mm. Advantages: anti-vibration clamping, increase of tool life, reduction of micro breaks of the tool cutting edge, easy handling, high positioning and repetition accuracy, flexible thanks to the usage of reduction sleeves. Hydro expansion Chucks Incl. of hexagon T-handle wrench. For drilling, reaming, and milling. Also suitable for clamping of Weldon and Whistle- Notch shanks. Reduction sleeves see cat.-no Cylinder cleaner see cat.-no Draw-in bolts see cat.-no Short, heavy Short, slim Taper d1 d l1 l l3 g Weight ST mm mm mm mm mm kg ,5 64, M 16 x 1 1, ,0 81, M 16 x 1 3,9 10 Taper d1 d d3 l1 l l3 l4 g 1580 ST mm mm mm mm mm mm mm ,5 80, ,5 M ,5 80, ,0 M ,5 80, ,0 M 8 x ,5 80, ,0 M 10 x ,5 80, ,0 M 10 x ,5 80, ,0 M 1 x ,5 80, ,0 M 1 x ,5 80, ,0 M 16 x ,5 80, ,5 M ,5 80, ,0 M ,5 80, ,0 M 8 x ,5 80, ,0 M 10 x ,5 80, ,0 M 10 x ,5 80, ,0 M 1 x ,5 80, ,0 M 1 x ,5 80, ,0 M 16 x With sealing ring for hydro expansion chucks. Reduction sleeves 158 Without sealing ring for power chucks Suitable Reduc for D 1 mm for D mm Suitable Reduc for D 1 mm for D mm Suitable Reduc for D 1 mm for D mm

15 Clamping tools 1596 Shrinking Chucks Highest true-running accuracy and taper tolerance. Manufactured in climatised environment. Advantages: high chucking forces and long service life thanks to the usage of high-quality hot working steel and special heat treatment. Coated for stainlessness. Patented nominal-size increase allows for an automatic shrinking and facilitated handling. Suitable for clamping carbide, HSS, and steel shanks with a tolerance of h6. Extension pieces see cat.-no Draw-in bolts see cat.-no Shrinking machines see cat.-no Slim. patented nominal-size Taper d1 d d3 l1 l A V g 1596 ST mm mm mm mm mm mm mm M M M M M M 8 x M 8 x M 10 x M 1 x M 1 x M 16 x M 16 x M 16 x L M L M L M L M L M L M L M L M XL M XL M XL M 8 x XL M 8 x XL M 8 x XL M 1 x XL M 1 x XL M 16 x slim Taper d1 d d3 l1 NL A V g ST mm mm mm mm mm mm mm M M M M M 8 x M 10 x M 1 x M 16 x L M L M L M L M L M 8 x L M 10 x L M 1 x L M 16 x XL M XL M XL M 8 x XL M 10 x XL M 1 x XL M 16 x

16 Toolholders Taper sleeves Milling sleeves Tool holder for Screw-in Milling Cutters Precision version. External taper and fit ground. For mounting screw-in milling cutters with thread. Draw-in bolts see cat.-no d 3 ST d 1 d D L A mm mm mm mm mm mm M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , Performance requires quality. Solid carbide milling cutters by ATORN: ATORN s high-quality milling tools

17 1601 Precision version. For mounting drill chucks in milling machines. Draw-in bolts see cat.-no Tool Adapters for Drill Chucks Taper Mount d 1 l l ST DIN 38 mm mm 40 B , B , Clamping tools Taper Sleeves Precision version. For mounting tools with MT shank and drive tang Draw-in bolts see cat.-no Fine balancing G, rpm, stainless coating. With Balluf-Chip borehole Balanced G 6, rpm External taper Internal taper l l1 d ST MT mm mm mm , , , , , L , , L , , L 156 4, External taper Internal taper l l1 d ST MT mm mm mm , , L , , L , , L , , L , Milling Sleeves Precision version with built-in draw-in screw. For mounting tools with MT shank and draw-in thread. Draw-in bolts see cat.-no External taper Internal taper Draw-in thread A D 1613 ST MT internal mm mm 40 1 M M M M M M M

18 Adapter sleeves Collet chucks Collets Milling cutter mounts 1618 Precision version with built-in draw-in screw. For mounting and extending ST shanks. Draw-in bolts see cat.-no Adapter Sleeves 1618 External taper Internal taper Draw-in Thread Draw-in Thread l l 1 d ST ST external internal mm mm mm M 16 M , M 4 M , M 4 M , HG Collet Chucks Haimer High-precision chuck, reliable clamping, high truerunning accuracy. With clamping screw and extraction hook. Very suitable for high-speed machining. For clamping tools with straight shank. HG collets see cat.-no Draw-in bolts see cat.-no HSC Taper Size A Ø D for HG collet Ø 165 ST mm mm cat.-no / 4 / 5 / 6 / L / 4 / 5 / 6 / / 4 / 5 / 6 / L / 4 / 5 / 6 / / 1 / L / 1 / Taper Size A Ø D for HG collet Ø 165 ST mm mm cat.-no / 1 / L / 1 / / 18 / L / 18 / / 18 / L / 18 / HG Collets Haimer Spring steel hardened, ground, and coated. For HG chucks and shank tolerances h clamping Ø for 167 mm size clamping Ø for 167 mm size

19 Milling Cutter Mounts Clamping tools Precision version, borehole tolerance < 0,004 mm. For clamping tools with lateral driving face in compliance with DIN 1835 B and DIN 6535 HB Draw-in bolts see cat.-no Spare screw see cat.-no Fine balancing G, rpm, stainless coating. With Balluf-Chip borehole Balanced G 6, rpm Taper for milling cutter A D ST shank Ø d mm mm mm L XL L XL L XL L XL L XL K L XL L XL K L XL K Taper for milling cutter A D ST shank Ø d mm mm mm 40 L K L L XL L XL L XL L XL L XL L XL L XL L XL L L

20 Milling cutter mounts Toolholders Combination milling cutter arbors 160 Extended, slim version. Borehole tolerance < 0,004 mm, after the hardening, the shank was turned once more for smoother operation. With ball joint clamping screw for Weldon and Whistle- Notch. By default with Balluf-Chip borehole. Milling Cutter Mounts slim Through-hole stop screw. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Taper for milling cutter A D D3 D ST shank Ø D1 mm mm mm mm mm 40 L XL L XL L XL L XL L XL L XL L XL L XL Precision version, borehole tolerance < 0,004 mm, with coolant bore. Advantage: the chips are removed better thanks to the coolant pressure. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Milling Cutter Mounts with Coolant Bore Draw-in bolts see cat.-no Spare screw see cat.-no Draw-in bolts see cat.-no Spare screw see cat.-no Taper for milling cutter A D 1637 ST shank Ø d mm mm mm L L L L L L L Taper for milling cutter A D 1637 ST shank Ø d mm mm mm 40 L Precision version, high true-running accuracy thanks to surface ground contact surface (accuracy < 0,003 mm). Advantages: Thanks to the offset threaded pin, the contact surface of the drill is drawn towards the enlarged diameter. This provides for an improved support of the tool and therefore for higher feed rates. Toolholder for reversible Cutting Insert solid drilling tool For all solid drilling tools with straight shank DIN 6595 part 1. Draw-in bolts see cat.-no Spare screw see cat.-no Taper d A D 1639 ST mm mm mm Taper d A D 1639 ST mm mm mm

21 1650 Combination Milling Cutter Arbors Clamping tools Precision version, surface ground contact surface (accuracy < 0,003 mm). Incl. of feather key, driving ring and draw-in screw. With feather key for milling cutters with longitudinal keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN Draw-in bolts see cat.-no Driving rings see cat.-no Draw-in screws see cat.-no u Drawin screw wrenches see cat.-no Fine balancing, rpm, stainless coating. With Balluf-Chip borehole Balanced 6, rpm Taper d A D l ST mm mm mm mm L XL L XL L XL L XL L XL L XL L XL L XL L L XL

22 Milling head mounts Basic mount Boring bar blanks Short chucks 1671 Milling Head Mounts Precision version with enlarged and surface ground contact surface. Short overhang for increased stability. For Shell End Milling Cutters and Milling Cutters with Transverse Keyway. d = 40 and 60 mm additionally with 4 threaded holes for direct mounting. Draw-in bolts see cat.-no Draw-in screws see cat.-no u Draw-in screw wrenches see cat.-no Fine balancing G, rpm, stainless coating. With Balluf-Chip borehole Balanced G 6, rpm. 0 Taper d A D l ST mm mm mm mm L L L L L L L L L ABS -Basic Mount ; Shape B, with sealing disc and modification set for shape AD. For Komet reversible cutting insert solid drilling tools. Taper ABS d L L 1 Weight ST mm mm mm approx. kg , , , , , , Boring Bar Blanks ST and shoulder hardened and ground, material 16 MnCr5. For manufacturing special tools Taper Boring bar Ø d 1 l 1683 ST mm mm 40 63, ,

23 Clamping tools. Tool holders in compliance with JIS B 6339 (MAS-BT) JIS B 6339 (Japan, former standard > MAS-BT). Taper angle tolerance more exact than AT3. Case-hardened 60- HRC. Working surfaces ground. MAS-BT d1 G d5 H7 d a l1 l l3 l5 l6 mm mm mm mm mm mm mm mm mm 30 31,75 M 1 1, ,4 16,3 7, ,45 M 16 17, ,4 7,6 8, ,85 M 4 5, , ,3 11, Short Chucks Short type, wear parts hardened and ground. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Draw-in bolts see cat.-no Taper Clamping range L D MAS-BT mm mm mm 40 1, , Short type, wear parts hardened and ground, clamping range 1-16 mm. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. CNC Short Chucks 1-16 mm Draw-in bolts see cat.-no Taper Clamping range A D MAS-BT mm mm mm

24 Short chucks Tapping Chucks Collet chucks Power chucks Taper sleeves 107 Ü Short, sturdy, and slim design, for clockwise and counterclockwise operation. High chucking forces thanks to gear reduction, high precision and true-running accuracy. Incl. of wrench with T-handle for high power. Precision Short Chucks Draw-in bolts see cat.-no Taper with drill chuck l 1 d 1 l 107 MAS-BT mm mm mm mm 40 1, , , , , , , , , , , , With Length compensation in response to compression and tension. Quick-Change Tapping Chucks Quick-change sleeves see cat.-no Draw-in bolts see cat.-no Taper for Taps suitable Length compensation L D D 1458 MAS-BT inserts/size compr./tension mm mm mm mm 40 M 3 - M 1 1 9,0/9, M 6 - M 0 15,0/15, M 14 - M ,0/4, M 6 - M 0 15,0/15, ER Collet Chucks ST 40 = shape AD/B ST 50 = shape AD Precision version. Hohe Rundlaufgenauigkeit. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collet sets see cat.-no Collets see cat.-no and Draw-in bolts see cat.-no Taper Size Clamping range Collets l l 1 d MAS-BT mm mm mm mm 40 ER ER 5/430 E 60 15, ER 3-0 ER 3/470 E , ER ER 40/47 E , ER 3-0 ER 3/470 E , ER ER 40/47 E , OZ Collet Chucks Precision version. Ball-bearing mounted union nut. Incl. of clamping nut. For the clamping of tools with straight shank in collets DIN Collets see cat.-no Draw-in bolts see cat.-no Taper Clamping range for collets A D 1545 MAS-BT mm mm mm E E

25 1578 Power chucks 0 Clamping nut with needle roller cage, robust design, simple in presetting and application. High true-running accuracy, torque transmission and stability. Thanks to reductions, usable from 3-3 mm. Incl. of clamping nut. For clamping tools with straight shank. Also suitable for clamping Weldon shanks. Particularly suited for roughing. Reduction sleeves see cat.-no Wrench see cat.-no Draw-in bolts see cat.-no Taper d D A L 1578 MAS-BT mm mm mm mm Clamping tools Precision version. For mounting drill chucks in milling machines. Toolholder for Drill Chuck Draw-in bolts see cat.-no Taper Mount d 1 l l MAS-BT DIN 38 mm mm 40 B , Taper Sleeves BT 40 = shape AD/B BT 50 = shape AD Precision version. For mounting tools with MT shank and drive tang. Draw-in bolts see cat.-no External taper Internal taper A l 1 D 1611 MAS-BT MT mm mm mm , , , , , , , Performance requires quality. Digital slide callipers by ATORN: ATORN s high-quality measuring tools

26 Milling cutter mounts Combination milling cutter arbors Basic mount Short chucks Tapping Chucks 1633 Milling Cutter Mounts Precision version, borehole tolerance < 0,004 mm. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Draw-in bolts see cat.-no Taper for milling cutter shank Ø d A D 1633 MAS-BT mm mm mm Taper for milling cutter shank Ø d A D 1633 MAS-BT mm mm mm Precision version, surface ground contact surface (accuracy < 0,003 mm). Incl. of feather key, driving ring and draw-in screw. With feather key for milling cutters with longitudinal keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN Combination Milling Cutter Arbors Draw-in bolts see cat.-no Driving rings see cat.-no Draw-in screws see cat.-no u Drawin screw wrenches see cat.-no Taper d l 4 l 3 d 1 I 5 I 1651 MAS-BT mm mm mm mm mm mm ABS -Basic Mount ; Shape B, with sealing disc and modification set for shape AD. For Komet reversible cutting insert solid drilling tools. Draw-in bolts see cat.-no Taper ABS d L L 1 Weight MAS-BT mm mm mm approx. kg , , , , , ,

27 Clamping tools. Tool Adapters in Compliance with DIN 080 ST shank ST 30 - ST 50 with internal draw-in thread, manual clamping and lock ring for automatic clamping DIN 080. Alloyed case-hardened steel, min. tensile strength 950 N/mm. Taper angle tolerance more exact than AT3. Case-hardened 60- HRC. Working surfaces ground. SK d1 a b k G d d3 d4 l1 l l3 l4 l5 mm mm mm mm mm mm mm mm mm mm mm mm 30 31,75 1,6 16,1 8 M 1 50,0-17,1 68,4 16, ,45 1,6 16,1 10 M 16 63,0 1,1 5,0 93,4, ,85 3, 5,7 1 M 4 97,5 3,0 39,3 16,8 35, / 100 % concentricity tested, based on DIN ISO 10888, worm gearing for high chucking forces. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation and quick-breaking spindles. Short Chucks AKL 1-16 mm Other balancing grades available on request Taper Clamping range A D1 L ST mm mm mm mm Short Chucks Ü Short, sturdy, and slim design. High chucking forces thanks to gear reduction, high precision and true-running accuracy. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. 105 Taper Clamping range l 1 d 1 l 105 ST mm mm mm mm 40 1, , , , , , with Length compensation in response to compression and tension. Quick-Change Tapping Chucks Quick-change sleeves see cat.-no Draw-in bolts see cat.-no Taper for Thread suitable Length compensation L D D 1455 ST drill inserts/size compr./tension mm mm mm mm 40 M 3 - M 1 1 9,0/9, M 6 - M 0 15,0/15, M 14 - M ,0/4, M 6 - M 0 15,0/15,

28 Collet chucks Taper sleeves Milling sleeves Adapter sleeve 1510 ER Collet Chucks Set Set consists of: 1 high-performance drilling and milling chuck 3-6 mm, chucking capacity type ER 40, 1 ea. collet, slit in two planes, type 47 E, 4 / 5 / 6 / 8 / 10 / 1 / 14 / 16 / 18 / 0 / / 4 / 5 mm Ø, and wrench. in plastic case Shank 1510 ST plastic case, empty ER Collet Chucks Precision version. Hohe Rundlaufgenauigkeit. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collet sets see cat.-no Collets see cat.-no and Taper Size Clamping range Collets l l 1 d ST mm mm mm mm 30 ER 3-0 ER 3/470 E , ER 3-0 ER 3/470 E , ER ER 40/47 E , OZ Collet Chuck Set Set consists of: 1 drilling and milling collet chuck - 5 mm clamping range, 1 ea. collet type 46 E 4 / 6 / 8 / 10 / 1 / 14 / 16 / 18 /0 / / 4 and 5 mm Ø and hook wrench. In plastic case Shank 1540 ST plastic case, empty With ball-bearing mounted union nut. Incl. of clamping nut. For the clamping of tools with straight shank in collets DIN OZ Collet Chucks Collets see cat.-no Taper Clamping range for collets l d ST mm mm mm E E E E E

29 1600 Precision version. For mounting drill chucks in milling machines. Tool Adapters for Drill Chucks Clamping tools 1600 Taper Mount d 1 l l ST DIN 38 mm mm 40 B , B , Taper Sleeves Precision version. For mounting tools with MT shank and drive tang External taper Internal taper l l 1 d ST MT mm mm mm , , , , , Milling Sleeves Precision version with built-in draw-in screw. For mounting tools with MT shank and draw-in thread. External taper Internal taper l l 1 d ST MT mm mm mm , , , , , External taper Internal taper Draw-in thread A D 161 ST MT Internal mm mm 40 M M M Precision version with built-in draw-in screw. For mounting and extending ST shanks. Adapter Sleeve 1617 External taper Internal taper Draw-in thread Draw-in thread l l 1 d ST ST external internal mm mm mm M 4 M ,

30 Milling cutter mounts Arbors Milling head mounts Basic mount 1630 Precision version, borehole tolerance < 0,004 mm. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Milling Cutter Mounts 1630 Taper for milling cutter shank Ø d A D 1630 ST mm mm mm Taper for milling cutter shank Ø d A D 1630 ST mm mm mm Precision version, surface ground contact surface (accuracy < 0,003 mm). Incl. of feather key, driving ring and draw-in screw. With feather key for milling cutters with longitudinal keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN Combination Milling Cutter Arbors Driving rings see cat.-no Draw-in screws see cat.-no and Draw-in screw wrenches see cat.-no Taper d A D l 1649 ST mm mm mm mm , , , , , , , Taper d A D l 1649 ST mm mm mm mm , , , , , , Arbors for Shell end Milling Cutters Precision version, surface ground contact surface (accuracy < 0,003 mm). Incl. of feather key and draw-in screws. With feather key for milling cutter with longitudinal keyway e.g. DIN 841. Draw-in screws see cat.-no and Draw-in screw wrenches see cat.-no Milling cutter arbor collars see cat.-no Taper d l 3 d 1 l l ST mm mm mm mm mm 40 36, , , , , , ,

31 1670 Milling Head Mounts Precision version with enlarged and surface ground contact surface. Short overhang for increased stability. Incl. of draw-in screws. For Shell End Milling Cutters and Milling Cutters with Transverse Keyway. d = 40 mm additionally with 4 threaded holes for direct mounting. Draw-in screws see cat.-no and Draw-in screw wrenches see cat.-no Taper d A D l 1670 ST mm mm mm mm ABS -Basic Mount ; Shape B, with sealing disc and modification set for shape AD. For Komet reversible cutting insert solid drilling tools. Clamping tools Taper ABS d L L 1 Weight 1690 ST mm mm mm approx. kg , , , Performance requires quality. Adjustable wrenches by ATORN: ATORN s high-quality hand tools

32 Drill chuck Quick-Change Chucks Chuck Collets Tapping Chucks Tapping Attachments. Tool Adapters in Compliance with DIN 8 Morse taper shank MT 3 - MT 5 DIN 8 parts 1 shape A with drive tang DIN 07. MK l1 d1 G a d d3 l l3 l4 l5 SW A mm mm mm mm mm mm mm mm mm degrees/minutes/seconds ,85 M 1 5,0 19,0 36 5, /6/ ,67 M 16 6,5 5,0 43 8, /9/ ,399 M 0 6,5 35, , /30/ / Drill chuck with integrated MT shank. Keyless clamping, automatic tightening, high true-running accuracy. Optimal stability thanks to a compact design. High-Performance Three-Jaw Drill Chucks SBF-plus Only for clockwise operation Clamping width Clamping shank D L mm mm mm 1-13 MT 50 85, MT , MT , Ø , MT , MT , * Precise quick-change mount. For boring mills and drills. Quick-Change Chucks 131 Quick-change sleeves see cat.-no. 133 and 135. Size Shank for boreholes L1 L D for chuck collet Ø 131 MT in steel Ø mm mm mm mm mm * For quick-change mounts cat.-no For mounting tools with morse taper shank and drive tang in compliance with DIN 8 B and adapter sleeves in compliance with DIN 639 cat.-no. 711 (for tools with straight shank). Morse Taper Chuck Collets for chuck for tools D sleeve Ø L1 L D1 133 size with MT mm mm mm mm for chuck for tools D sleeve Ø L1 L D1 133 size with MT mm mm mm mm

33 135 Tap Collets * For mounting quick-change sleeves without friction clutch (cat.-no. 1459) or with adjustable safety friction clutch (cat.-no. 1460). With Length compensation in response to compression and tension (D/Z). For quick-change mounts cat.-no For clamping taps with square drive. Clamping tools for chuck Cutting range D/Z L1 L D1 D Inserts 135 size mm mm mm mm mm size M 3 - M 1 7, M 6 - M 0 1, M 3 - M 1 7, M 6 - M 0 1, M 6 - M 0 1, M 14 - M 33 0, Tapping Chucks O Double chuck, clamps shank and square-end. Adjustable safety friction clutch to prevent tool breakage. Pendulum action to compensate for misalignments between machine and tool. Elastic length compensation in response to compression and tension. Incl. of wrench. For cutting internal threads with reversible drills, lathes, and milling machines. Can be mounted horizontally or vertically Shank Ø d K Metric Whitworth Whitworth Pendulum Length compensation d 1 d l l MT mm mm thread thread pipe thread action mm compr./tension mm mm mm mm mm,5-10 0,0-8 M 3-1 1/8-1/ inch G 1/8 inch 1,0 10/ ,5-10 0,0-8 M 3-1 1/8-1/ inch G 1/8 inch 1,0 10/ ,0-16 4,7-1 M 8-0 1/4-13/16 inch G 1/8-1/ inch 1,5 10/ ,0-16 4,7-1 M 8-0 1/4-13/16 inch G 1/8-1/ inch 1,5 10/ ,0-3 0,0-18 M /16-1.1/8 inch G 1/4-7/8 inch,0 10/ Tapping Attachments * With infinitely adjustable clamping jaws. Built-in retraction :1. Adjustable safety friction clutch to prevent tool breakage. Rotation change immediately after an exchange of feed direction. For cutting internal threads with right-turning table and column drilling machines Shank Cutting range Clamping range Rotational speed D L 1408 MT shank mm max. rpm mm mm M 3 - M 10,5-10, M 6 - M 16 4,5-1, M 14 - M 7 11,0 -, Tapping Attachments O With morse taper shank in compliance with DIN 8 B with length compensation in response to tension. For thread cutting with hand drills and manual feed and without spindle reservation. Maintenance-free and for right- and left-hand threads. Quick-change sleeves see cat.-no Tapping heads with further shanks available on request. 1) Self feed ) Torque support 1410 Size for n max. B L L 1 D D 1 D 1410 taps rpm mm mm mm mm mm mm 1 TA 1/MT M 3 - M TA 1/MT 3 M 3 - M TA 0/MT 3 M 8 - M

34 Collet chucks Combination milling cutter arbors Shrinking chucks 1541 OZ Collet Chucks Morse taper shank with internal draw-in thread. With clamping nut. Collets see cat.-no Taper MT / Clamping range for collets l d draw-in thread mm mm mm / M E / M E / M E / M E Combination Milling Cutter Arbors Morse taper shank with internal draw-in thread. With feather key for milling cutters with longitudinal keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN Taper d A l 1648 MT mm mm mm Toolholders in Compliance with DIN Alloyed case-hardened steel, min. tensile strength 950 N/mm. Taper tolerance less than AT3 in compliance with DIN 7187 and DIN 080. Hardness and depth match the respective mount. In order to avoid breakage or cracks, the thin-walled HSK chucks are not full-hardened. The different shapes of the hollow shaft taper DIN 69893: Hollow shaft taper HSK for automatice tool exchange with gripper groove. Shape A Shape B For machining centres with automatic tool changing. Central coolant supply through coolant tube. For machining centres and turning machines with automatic tool changing. Enlarged contact. Coolant through flange or central with coolant tube. Hollow shaft taper HSK for manual tool changing without gripper groove. Shape C Shape D Preferred type in transfer lines and special machines with manual tool exchange. Central coolant supply. For applications requiring good support through face rest. Manual tool exchange. Enlarged contact. Coolant through flange or central with coolant tube. Hollow shaft taper HSK for high rotational speed applications during high speed machining (HSC) with gripper groove. Shape E Shape F Prefered for high-speed machining. Symmetric without driver slots. Central coolant supply possible through coolant tube. Enlarged contact. Central coolant supply possible through coolant tube

35 1597 Shrinking Chucks Highest true-running accuracy and taper tolerance. Special heat treatment. Coated for stainlessness. Patented nominal-size increase allows for an automatic shrinking and facilitated handling. Suitable for clamping carbide, HSS, and steel shanks with a tolerance of h6. HSK d1 d d3 l1 l A V g 1597 mm mm mm mm mm mm mm M M M M M M 8 x M 10 x M 10 x M 1 x M 1 x M 16 x M 16 x M 16 x L M L M L M 8 x L M 10 x L M 10 x L M 1 x L M 1 x L M 16 x XL M XL M XL M 8 x XL M 10 x XL M 10 x XL M 1 x XL M 1 x XL M 16 x XL M 16 x XL M 16 x slim HSK d1 d d3 l1 NL A V g mm mm mm mm mm mm mm M M M M M 8 x M 10 x M 1 x M 1 x , M 16 x L M L M L M L M L M 8 x L M 10 x L M 1 x L M 16 x L M 16 x XL M XL M XL M XL M XL M 8 x XL M 10 x XL M 1 x XXL M XXL M XXL M 8 x XXL M 10 x XXL M 1 x XXL M 16 x XXL M 16 x Slim. patented nominal-size Clamping tools HSC HPC Coolant tube see cat.-no Wrench for coolant tube see cat.-no Shrinking machines see cat.-no

36 Shrinking chucks Short chucks Quick-change tapping chucks 1599 Shrinking Chucks HSC HPC Highest true-running accuracy and taper tolerance, manufactured in climatised environment. Advantages: high chucking forces and long service life thanks to the usage of high-quality hot working steel and special heat treatment. Coated for stainlessness. Patented nominal-size increase allows for an automatic shrinking and facilitated handling. Suitable for clamping carbide, HSS, and steel shanks with a tolerance of h6. Shrinking machines see cat.-no Slim. patented nominal-size HSK d1 d d3 l1 A V g mm mm mm mm mm mm M M M L M L M L M L M L M L M 8 x L M 10 x L M 10 x L M 1 x XL M XL M XL M XL M XL M XL M 8 x XL M 10 x XL M 10 x XL M 1 x slim HSK d1 d d3 l1 NL A V g mm mm mm mm mm mm mm M M L M L M L M L M L M 8 x L M 10 x XL M XL M XL M XL M XL M 8 x XL M 10 x XXL M XXL M XXL M 8 x 1 40 XXL M 10 x

37 185 Short Chucks Very high precision, working surfaces hardened and ground. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Clamping tools 185 HSK Clamping range L D mm mm mm 63 1, Short type, wear parts hardened and ground, clamping range 1-16 mm. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Short Chucks 1-16 mm Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK Clamping range A D mm mm mm Short Chucks 0 Short type, wear parts hardened and ground, high true-running accuracy. Incl. of wrench with T-handle for high power. For clockwise and counterclockwise operation. Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK Clamping range D L L 1 max. weight mm mm mm mm kg 63 0, , , , WFLC. Precision version with length compensation in response to compression and tension. Quick-change Tapping Chucks Quick-change sleeves see cat.-no Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK for taps Suitable Length compensation L D Ø D Ø 1838 drill inserts/size compr./tension mm mm mm mm 63 M 3 - M 1 1 7,5/7, M 6 - M 0 10/

38 Expansion chucks Arbors Collet chucks 1840 Hydro expansion Chucks short, slim HSC 0 High true-running accuracy and torque transmission. Low maintenance thanks to enclosed clamping system. Material N/mm tensile strength, hardened (5+ HRC). Max. coolant pressure 80 bar, axial length adjustment 10 mm. Advantages: anti-vibration clamping, increase of tool life, reduction of micro breaks of the tool cutting edge, easy handling, high positioning and repetition accuracy, flexible thanks to the usage of reduction sleeves. Incl. of hexagon T-handle wrench. For drilling, reaming, and milling. Also suitable for clamping of Weldon and Whistle- Notch shanks. Reduction sleeves see cat.-no Cylinder cleaner see cat.-no Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK d1 d d3 l1 l l3 l4 g 1840 mm mm mm mm mm mm mm M M M 8 x M 10 x M 10 x M 1 x M 1 x M 16 x M 16 x M 16 x Arbors for Milling Cutters with Draw-in thread HSC Precision version. External taper and fit ground. For mounting screw-in milling cutters with thread Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK d 1 d D A L M mm mm mm mm mm 63 6, , L 8, XL 8, , L 10, XL 10, XXL 10, , , L 1, XL 1, XXL 1, XXXL 1, L XL XXL XXXL , Performance requires quality. ATORN s taps: ATORN s high-quality drilling tools

39 Precision version. High true-running accuracy. For clamping tools with straight shank in collets DIN 6499-shape A and B. ER Collet Chucks Collet sets see cat.-no Collets see cat.-no and Coolant tube see cat.-no Wrench for coolant tube see cat.-no Clamping tools HSK - ER Clamping range A D Ø 1843 mm mm mm L L L L ER Collet Chucks slim HSC Clamping nut fine balanced for HSC, ER11 throughhole core-drilled, after the hardening, the shank was turned once more. With Balluf-Chip borehole. For clamping tools with straight shank in collets DIN 6499-shape A and B. Collet sets see cat.-no Collets see cat.-no and Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK - ER Clamping range A D Ø mm mm mm 63 L XL L XL L XL Collet Chucks Centro P Mini HSC HPC * Extremely slim design, external and internal taper ground. Concentricity and repeatability 0,003 mm (with GER-HP collets). Concentricity and repeatability 0,006 mm (with GER collets). Clamping nut not included. For high-precision clamping of tools with straight shank, without concentricity and clamping force loss, up to shank tolerance h10. Collets with square drive are not suitable for taps. Clamping nuts and wrench see cat.-no GER-HP collets see cat.-no GER collets see cat.-no Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK Size Clamping range Collets Dimension D Dimension A Insertion depth E mm mm mm mm 63 CP 11 M 1-7 ER 11/4008 E CP 11 M 1-7 ER 11/4008 E Performance requires quality. Roughing end milling cutter by ATORN: ATORN s high-quality milling tools

40 Collet chucks Taper sleeves Milling cutter mounts 186 Collet Chucks Centro P * External and internal taper ground. Concentricity and repeatability 0,003 mm (with GER-HP collets). Concentricity and repeatability 0,006 mm (with GER collets). Clamping nut not included. For high-precision clamping of tools with straight shank, without concentricity and clamping force loss, up to shank tolerance h10. Collets with square drive are not suitable for taps. Clamping nuts and wrench see cat.-no Sealing disc see cat.-no GER-HP collets see cat.-no GER collets see cat.-no Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSC HPC 186 HSK Size Clamping range Collets Dimension D Dimension A Insertion depth E* Insertion depth F** mm mm mm mm mm 63 CP ER 16/46 E CP ER 16/46 E CP 5-16 ER 5/430 E CP 5-16 ER 5/430 E CP 3-0 ER 3/470 E CP 3-0 ER 3/470 E CP 3-0 ER 3/470 E * Dimension E for tool shanks less than 16 mm ** Dimension F for tool shanks bigger than 16 mm 1846 Taper Sleeves Precision version. For mounting tools with MT shank and drive tang. Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK MT A D Ø 1846 mm mm HG Collet Chucks Haimer High-precision chuck, reliable clamping, high truerunning accuracy. Incl. of draw-in screws and extraction hook. Very suitable for high-speed machining. For clamping tools with straight shank. HG collets see cat.-no Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSC 1848 HSK Size A Ø D for clamping Ø 1848 mm mm mm / 3 / 4 / 5 / 6 / / 1 / / 18 / Performance requires quality. Burrs by ATORN: ATORN s high-quality grinding and cutting tools

41 Precision version, borehole tolerance < 0,004 mm. Fine balancing G, rpm, stainless coating. With Balluf-Chip borehole. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Milling Cutter Mounts Coolant tube see cat.-no Wrench for coolant tube see cat.-no Spare screw see cat.-no Clamping tools HSK d D A 1849 mm mm mm L XL L XL L XL XL XL XL XL XL Extended, slim version, borehole tolerance < 0,004 mm, after the hardening, the shank was turned once more for smoother operation. With ball joint clamping screw for Weldon and Whistle-Notch. By default with Balluf-Chip borehole. With through-hole stop screw. For clamping tools with lateral Driving face in compliance with DIN 1835 B and DIN 6535 HB. Milling Cutter Mounts slim Coolant tube see cat.-no Wrench for coolant tube see cat.-no Spare screw see cat.-no HSK D1 A D D3 D mm mm mm mm mm 63 L XL L XL L XL L XL L XL L XL L XL L XL

42 Combination milling cutter arbors Milling head mounts Basic mount Coolant tube Draw-in bolts Precision version, surface ground contact surface (accuracy < 0,003 mm). Fine balancing G, rpm, stainless coating. With Balluf-Chip borehole. Incl. of feather key, driving ring and draw-in screw. With feather key for milling cutters with longitudinal Combination Milling Cutter Arbors keyway e.g. DIN 841 and driving ring for milling cutters with transverse slot DIN 1880 and milling heads DIN Driving rings see cat.-no Draw-in screws see cat.-no and Draw-in screw wrenches see cat.-no Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK d D A l 1855 mm mm mm mm L L HSK d D A l 1855 mm mm mm mm 63 L L L Milling Head Mounts 0 Precision version with enlarged and surface ground contact surface. Short overhang for increased stability. Fine balancing G, rpm, stainless coating. With Balluf-Chip borehole. Incl. of draw-in screws. For Shell End Milling Cutters and Milling Cutters with Transverse Keyway. Draw-in screws see cat.-no u Draw-in screw wrenches see cat.-no Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK D1 A D l mm mm mm mm L L HSK D1 A D l mm mm mm mm 63 L L ; For Komet reversible cutting insert solid drilling tools. ABS -Basic Mount Coolant tube see cat.-no Wrench for coolant tube see cat.-no HSK ABS d 1 L L 1 Weight mm mm mm approx. kg , , , For optimising the central coolant feed of hollow shaft tapers in compliance with DIN HSK-A For coolant tube cat.-no Coolant Tube HSK D d L mm mm 63 M18 x ,5 104 Wrench for Coolant Tube HSK D L mm mm 63 16,

43 . Multi Spindle Heads for Drilling, Thread Cutting, Countersinking, Reaming, Milling, Turning etc. Clamping tools Multi spindle heads with fixed drilling picture for machining centres with or without automatic tool exchange, for using solid carbide tools with a rotational speed of up to rpm. With or without coolant feed. SMSK 6/15 with 6 spindles and a maximum drilling capacity of 15 mm per spindle. Spindle head in compliance with DIN for adjustable sleeves size 0. Special holder with collet mount for high rotational speed applications when using solid carbide drills and/or solid carbide tools. Multi spindle head mount ST 50 with gripper lock for machining centres. SMSK /15 ST-taper 40, with continuous coolant-feed, tapping chuck with Length compensation in response to compression and tension. SMSK 4/15 with 4 spindles and a max. drilling capacity of 15 mm per spindle and/or tapping capacity of M 1, spindle head in compliance with DIN for adjustable sleeves size 0. Quickchange tapping chucks with pressure and tension compensation and spring bearing countersleeve for bevelling the borehole. Multi spindle head mount ST 50 with gripper lock for machining centres. Multi spindle head, single adjustable with, 3 or 4 spindles available, max. drilling capacity per each spindle, depending on type, from 3 mm up to 3 mm. KE for easy and quick adjustable handling. Very sturdy construction, large adjusting range, narrow spindle distances, low weight, high service life, also suitable for small series with medium tolerance range. Multi spindle heads with adjustable drilling picture by exhanging spindle mount plate, so called the matrix. Please contact us! Please include a detailed drawing with measures of the drilling pictures in order to insure a good information. KR with joint spindles of high true-running accuracy and good bearing stability at most narrow spindle distance. Easy reverse of drilling pictures and absolute true size of drilling picture thanks to spindle mount plates (matrixe) which are produced by using coordinate machining system, large adjusting range of single types up to 530 mm, max. drilling capacity up to 40 mm in steel Draw-in Bolts DIN Shape A, with hole and O-ring. Gripping lip angle Shape B without borehole, with O-ring. Gripping lip angle for d 1 d d 3 d 4 G l 1 l l ST mm mm mm mm mm mm mm M M Gripping lip angle 45. Draw-in Bolts ISO 7388/ Shape B With hole and O-ring Without borehole, with O-ring for d 1 d d 4 G l 1 l l ST mm mm mm mm mm mm 40 18,95 1,95 17 M 16 44,5 16,4 11, ,10 19,6 5 M 4 65,5 5,55 17,

44 Draw-in bolts Tapping Attachments Tapping Chucks Rubber-Collets 1736 Draw-in Bolts 0 With annular groove (Ott-clamping groove), gripping lip angle Head made of solid stock With internal thread. for d 1 d d 3 G l 1 l 1736 ST mm mm mm mm mm 40 5,0 1,1 17 M ,6 3,0 5 M ,0 1,1 17 M ,6 3,0 5 M Gripping lip angle 45. Draw-in Bolts MAS 403-BT/JIS B Gripping lip angle Gripping lip angle 60 (also for OKUMA machining centres) for d 1 d d 4 G l 1 l BT mm mm mm mm mm M M Draw-in Bolts with buttress thread 1740 for G 1 G l 1 l 1740 ST mm mm 40 S 0 x M Tapping Attachments d Adjustable safety friction clutch, length compensation in response to compression and tension, automatic quick-return action 1,75:1. With internal taper for exchangeable shanks. Incl. of stop. For tapping with machines with clockwise operation working spindle. Can be mounted horizontally or vertically. Chuck arbors see cat.-no Rubber-Flex collets see Kat-Nr d A h 1 h h 3 Mounting for Rotational speed Length compensation for rubber d 1 h 3 h 1 h 1431 taper thread max. A axial mm collets mm mm mm mm 30 X B 16 M 1,4 - M ,5 J115/J116/J X B 16 M 3,0 - M ,0 J40/J41/J4//J X B 18 M 5,0 - M ,0 J440/J441/J443/J

45 1445 Tapping Chucks Clamping tools d Adjustable safety friction clutch, length compensation in response to compression and tension, automatic quick-return action 1,75:1. Straight shank mount with lateral clamping surface in compliance with DIN 1835 B/E. For tapping with machines with clockwise and counterclockwise operation working spindle. Can be mounted horizontally or vertically Rubber-Flex collets see Kat-Nr for straightshank Ø Length compensation Rubber A B D F J 1445 thread mm compr./tension mm collets mm mm mm mm mm SM - 00 M 1,4 - M 7 0 5,0/4,5 J115/116/117 7, SM4-00 M 3,0 - M 1 0 7,0/7,0 J40/J41/J4/J43 38, SM6-00 M 5,0 - M ,0/11,0 J440/J441/J443/J445 47, RUBBER-FLEX For tapping heads Tapmatic see Kat-Nr. 1431/1445. Rubber Collets Clamping range 1447 mm J 115 1,0 -,5 101 J 116,5-4,5 10 J 117 4,5-6,5 103 J 43,0-4,5 104 J 41 3,5-6,5 105 J 40 4,5-8, Clamping range 1447 mm J 4 6,5-10,0 107 J 443,8-7,0 108 J 441 4,5-10,0 109 J 440 7,0-13,0 110 J 445 9,0-15, O With Minimal length compensation. Save direct clamping with ER collets, straight shank mount with lateral clamping surface in compliance with DIN 1835 B/E. Advantage: chuck can be used from M 3,5 - M 30. For tapping with machines with Synchro spindle. Synchro Tapping Chuck Collets with inner square see cat.-no for Length compensation d d d 1 l l 1 Collet nut Ø 1449 Taps mm mm mm mm mm mm mm M 3,5 - M 30 +/- 0, ,5 53 ESX3-GB E O WFLC/MS.Precision version with length compensation in response to compression and tension. Straight shank mount with lateral clamping surface in compliance with DIN 1835 B/E. Quick-Change Tapping Chucks 145 Quick-change sleeves see cat.-no for Suitable Length compensation D Ø D 1 Ø D Ø L L Taps inserts/size compr./tension mm mm mm mm mm M 3 - M 1 1 7,5/7, M 6 - M 0 10,0/10,

46 Quick-change sleeves Reduction Sleeves Clamping sleeves Extensions 1459 WE. Sleeves without safety friction clutch. For clockwise and counterclockwise operation. Quick-change Sleeves without Safety Friction Clutch for Shank Ø Shank T DIN DIN DIN DIN D 1459 Chuck size mm mm / mm 1 3,5,7 M 3 M 3 M ,0 3,0 M 3,5 M 3, ,5 3,4 M 4 M 4 M ,0 4,9 M 5 - M 8 M 5 + M 6 M ,0 5,5 M 10 M 10 G 1/ ,0 6, M ,0 7,0 M 1 M ,0 8,0 M ,0 4,9 M 5 - M 8 M 5 + M 6 M ,0 5,5 M 10 M ,0 6, M ,0 7,0 M 1 M ,0 8,0 M ,0 9,0 M 14 M 14 G 1/ ,0 9,0 M 16 M 16 G 3/ ,0 11,0 M 18 M ,0 1,0 M 0 M 0 G 1/ ,0 9,0 M 14 M ,0 9,0 M 16 M ,0 11,0 M 18 M ,0 1,0 M 0 M ,0 14,5 M + M 4 M + M 4 G 5/ ,0 16,0 M 7 + M 8 M 7 + M 8 G 3/ ,0 18,0 M 30 M 30 G 7/ ,0 0,0 M 33 M 33 G WES/B, sleeves with safety friction clutch. For right-hand thread. Quick-change Sleeves with Safety Friction Clutch Bits for left-hand thread available on request for Shank Ø Shank T DIN DIN DIN DIN D 1460 Chuck size mm mm / mm 1 3,5,7 M 3 M ,0 3,0 M 3,5 M 3, ,5 3,4 M 4 M ,5 3,4 M ,0 4,9 M 5 M ,0 4,9 M 6 M ,0 4,9 M 8 M ,0 5,5 M 10 M ,0 6, M ,0 7,0 M 1 M ,0 8,0 M ,0 4,9 M 6 M ,0 4,9 M 8 M ,0 5,5 M 10 M ,0 6, M ,0 7,0 M 1 M ,0 8,0 M ,0 9,0 M 14 M ,0 9,0 M 16 M ,0 11,0 M 18 M ,0 1,0 M 0 M ,0 9,0 M 14 M ,0 9,0 M 16 M ,0 11,0 M 18 M ,0 1,0 M 0 M ,0 14,5 M M G 5/ ,0 14,5 M 4 M ,0 16,0 M M ,0 18,0 M 30 M ,0 0,0 M 33 M

47 1463 Reduction Sleeves Clamping tools For reducing the chuck size of quick-change tapping chuck sleeves ( WE and WES) ) Chuck mount, ) Insert mount. Size for for mounting d 1 d d 3 l l chuck size sleeves size mm mm mm mm mm 1/ , / , / , Clamping sleeves for Taps For direct mounting of taps in milling cutter mounts (Weldon) without length compensation. D d 1 x T L 1641 mm mm mm 16 3,5 x, ,0 x 3, ,0 x 4, ,0 x 5, ,0 x 6, ,0 x 7, Cost-efficient alternative for synchronised spindles. D d 1 x T L 1641 mm mm mm 0 10,0 x 8, ,0 x 9, ,0 x 9, ,0 x 11, ,0 x 1, ,0 x 14, Extension Pieces for Machine Taps Long and/or extra long version. The front end of the extension is designed to function as collet. When the knurled clamping nut is tightened, the collet clamps the tap.torque transmission by means of the square end. The back end of the extension is in compliance with DIN, so that the tap extensions can be mounted (like a tap) in quick-change sleeves or other tapping attachments. For tapping in hard-to-reach places e.g. high ledges, deep grooves, projecting edges on fixtures, extremely deep internal threads or right next to cast iron walls Dimensions Taps Dimensions extension Nominal thread Ø d mm Shank Ø Square-end Clamping length Ø D3 K D4/D5 L L DIN 371 DIN 374/376 d mm K1 mm l1 mm mm mm mm mm mm E1 M - M,6 M 4,8,1 6 4,9 6, E1 L M - M,6 M 4,8,1 6 4,9 6, E M 3 M 4,5 - M 5 3,5, ,9 7, E L M 3 M 4,5 - M 5 3,5, ,9 7, E3 M 4 M 6 4,5 3, ,9 8, E3 L M 4 M 6 4,5 3, ,9 8, E4 M 4,5 - M 6 M 8 6,0 4, ,5 1, E4 L M 4,5 - M 6 M 8 6,0 4, ,5 1, E5 M 7 M 9 - M 10 7,0 5, ,5 1, E5 L M 7 M 9 - M 10 7,0 5, ,5 1, E6 M 8 M 11 8,0 6, , 13, E6 L M 8 M 11 8,0 6, , 13, E7 M 9 M 1 9,0 7, ,0 15, E7 L M 9 M 1 9,0 7, ,0 15, E8 M 10 10,0 8, ,0 15, E8 L M 10 10,0 8, ,0 15, E9 M 14 11,0 9, ,0 18, E9 L M 14 11,0 9, ,0 18, E10 M 16 1,0 9, ,0 18, E10 L M 16 1,0 9, ,0 18,

48 Collets-Sets Collets 1519 ER/GER Collet Sets Fully hardened and ground The collapse is up to 1 mm smaller e.g. 9-8 mm, except for collets 1 mm and 1,5 mm (collapse only 0,5 mm). Box for collets made of plastics see AQURADO storage system cat.-no Polished, true-running accuracy 0,015 mm, on wooden rail. For standard collet chucks or collet chucks Centro P * Superfinish, GER collets true-running accuracy 0,005 mm, in wooden box. For standard collet chucks. * D x L Set contents Clamping range increments ER collets GER collets 1519 mm mm mm ER 11/4008 E 11,5 x 18,0 13-part 1-7 0,5 x ER 16/46 E 17,0 x 7,5 10-part ,0 x ER 0/48 E 1,0 x 31,5 1-part ,0 x ER 5/430 E 6,0 x 34,0 15-part ,0 x - 10 ER 3/470 E 33,0 x 40,0 18-part 3-0 1,0 x ER 40/47 E 41,0 x 46,0 3-part 4-6 1,0 x GER 11-B/4008 E 11,3 x 18,0 13-part 1-7 0,5 - x 01 GER 16-B/46 E 17,0 x 7,5 10-part ,0 - x 0 GER 0-B/48 E 1,0 x 31,5 1-part ,0 - x 03 GER 5-B/430 E 6,0 x 34,0 15-part ,0 - x 04 GER 3-B/470 E 33,0 x 40,0 18-part 3-0 1,0 - x 05 GER 40-B/47 E 41,0 x 46,0 3-part 4-6 1,0 - x 06 Performance requires quality. Short chucks by ATORN: ATORN s high-quality clamping tools

49 Clamping tools ER Collets Fully hardened and ground. Polished, true-running accuracy 0,015 mm. For standard collet chucks. The collapse is up to 1 mm smaller e.g. 9-8 mm, except for collets 1 mm and 1,5 mm (collapse only 0,5 mm). Box for collets made of plastics see AQURADO storage system cat.-no ER 11/4008 E D x L 11,5 x 18 mm. 151 ER 16/46 E D x L 17 x 7,5 mm. 15 ER 0/48 E D x L 1 x 31,5 mm. 153 ER 5/430 E D x L 6 x 34 mm ER 3/470 E D x L 33 x 40 mm. 155 ER 40/47 E D x L 41 x 46 mm. ER 11 ER 16 ER 0 ER 5 ER 3 ER 40 Borehole mm 1, , , , , , , , , , , ,5 11 7, , , , , , , , , , , , , , ,0 17,0 18 3,0 19 4, , , Performance requires quality. Solid carbide high-performance twist drills by ATORN: ATORN s high-quality drilling tools

50 Collets Clamping nuts GER Collets * Fully hardened and ground. Superfinish, true-running accuracy 0,005 mm. For standard collet chucks or collet chucks Centro P. The collapse is up to 1 mm smaller e.g. 9-8 mm, except for collets 1 mm and 1,5 mm (collapse only 0,5 mm). Box for collets made of plastics see AQURADO storage system cat.-no GER 11-B/4008 E GER 16-B/46 E D x L 11,3 x 18 mm. D x L 17 x 7,5 mm GER 0-B/48 E GER 5-B/430 E D x L 1 x 31,5 mm. D x L 6 x 34 mm GER 3-B/470 E GER 40-B/47 E D x L 33 x 40 mm. D x L 41 x 46 mm GER 11-B GER 16-B GER 0-B GER 5-B GER 3-B GER 40-B Size mm 1, ,5 0 0, , , ,5 06 4, ,5 08 5, ,5 10 6, ,5 1 7, , , , , , , , , ,0 17, , , , ,0 7,0 8 3,0 9 4,0 30 5,0 31 6, * Fully hardened and ground. Superfinish, true-running accuracy 0,003 mm. System concentricity and repetition accuracy 0,003 mm if used in conjunction with Centro P. For collet chucks Centro P. Sealing disc see cat.-no Box for collets made of plastics see AQURADO storage system cat.-no GER-HP Collets for Centro P 1546 GER 11-HP/4008 E D x L 11,3 x 18 mm GER 16-HP/46 E D x L 17 x 7,5 mm GER 5-HP/430 E D x L 6 x 34 mm GER 3-HP/470 E D x L 33 x 40 mm GER 40-HP/47 E D x L 41 x 46 mm

51 Clamping tools GER 11-HP GER 16-HP GER 5-HP GER 3-HP GER 40-HP Borehole mm 1, ,5 0 0, , , ,5 06 4, ,5 08 5, ,5 10 6, ,5 1 7, , , , , , , , , ,0 17, , , , ,0 7,0 8 3,0 9 4,0 30 5,0 31 6, ER Collets for Tapping With square drive for driving the tap. Without length compensation. For clamping taps with collet chucks. Only for Synchro machines. Box for collets made of plastics see AQURADO storage system cat.-no ER 5/48 E ER 3/4537 E Shank Ø Square-end L mm mm mm 3,5, ,5 3, ,5 4, ,0 4, ,0 5, ,0 6, ,0 7, ,0 8, ,0 9, ,0 9, ,0 11, ,0 1, Spare Clamping Nuts -Mini- For collet chucks type ER Clamping range Outside Ø d Collet Thread 1517 mm mm ER 11/4008 E M 13 x 0, ER 16/46 E M 19 x ER 0/48 E M 4 x ER 5/430 E M 30 X

52 Clamping nuts Wrench Collets Spare Clamping Nut For collet chucks type ER. Open-end wrench for nut cat.-no see cat.-no Standard version With ball bearing pressure ring, for increasing gripping force by approx. 50% for clamping range for type Nut Ø mm ER mm Jaw opening 5/ Wrench ; ; ;; Special steel, galvanised, vertically ground. For cat.-no Clamping range Collets 1516 mm 1-7 ER 11/4008 E ER 16/46 E ER 0/48 E Wrench Made of special steel hardened and galvanised, with suspension hole. For collet chucks type ER. 153 for clamping range for type for nut Ø Overall length 153 mm ER mm mm OZ Collets Spring steel, hardened throughout and ground. Through-hole in order to increase the clamping force. Advantages: improved concentricity, higher clamping force thanks to increased strength capacity, better system stiffness and tool life. Box for collets made of plastics see AQURADO storage system cat.-no E, for chuck size - 16 mm. D x L 5,5 x 40mm E, for chuck size 3-5 mm. D x L 35,5 x 5mm E, for chuck size 4-3 mm. D x L 44 x 60mm E 46 E 467 E Borehole mm E 46 E 467 E Borehole mm

53 156 OZ Clamping Nuts Clamping tools With ball-bearing mounted union nut. For collet chucks cat.-no Wrench see cat.-no cont. for clamping range d5 d7 l mm mm mm - 16 M 33 x 1,5 43 4, M 48 x, , M 60 x,5 7 33, Push- Collet Set 173 E/F part, hole diameters 3-4 mm, of 1 mm increments Collet sets with 4-point or 6-point profiles available on request. for clamping range 1568 mm Push- Collets Collets with 4-point or 6-point profiles available on request E, dimensions: Ø d 48 x Ø D 60 x L 94 mm, K = 30. DIN 6343/F48, triple slotted. ød K ød E, dimensions: Ø d 66 x Ø D 84 x L110 mm, K = 30. DIN 6343/F66, quadruple slotted. L 173 E 185 E Borehole mm E 185 E Borehole mm E 185 E Borehole mm

54 Inductive shrinking machine Fluid cooling unit Cooling adapter Length adjustment sleeve Workshop-oriented multi-purpose shrinking machine. Multi-purpose gripper clamps all sizes, exchangeable induction coils thanks to simple plug-in connection. Shrinking with the Lowest Temperature Method (NTM) means that shrinking on and off are done with the lowest possible temperature. This guarantees safe machining, less deformation and structural changes for the mount, and longer service life. Advantages: Shrinking of mounts of other manufacturers is possible. Thanks to the horizontal design, the shrinking depth can be determined with greater facility and broken-off tools can be removed more easily. Shrinking machine with induction coil Standard 5 incl. of Kevlar protective gloves and positioning ring. Inductive Shrinking Machine E-Zwo For shrinking carbide tools from 3-3 mm and HSS tools from 6-3 mm. Cooling station FKS 03 see cat.-no Induction coils see cat.-no Shielding rings see cat.-no Shrinking machine Height x Width x Depth Voltage Weight mm V kg E-Zwo 357 x 541 x Induction coils for inductive shrinking machine E-Zwo (cat.-no. 1584) Shielding rings for induction coils (cat.-no. 1585). Shielding of the magnetic field, protection of the chucks thanks to local heating. For lightning-quick and direct heating of the shank area. Induction coil for mounts for Shank Ø inside Ø mm mm Standard ,0 301 Standard ,0 30 Standard ,0 303 Module MST, extra slim version - 36,0 304 Slim 3-7 MST ,5 305 Slim 8-1 MST , Shielding rings for type for shank Ø mm Standard Standard Standard Standard Standard Standard Standard Easy handling by means of push-buttons. The shrinking time is automatically adjusted in accordance with the diameter. For shrinking carbide shanks from 3-0 mm and HSS shanks from 6-0 mm. Cooling station FKS see cat.-no Inductive Shrinking Machine ISG 00/ISG ISG 00 With cooling fan. Machine with fan, induction coil and 3 exchange discs ISG 0 Without cooling fan. Machine with induction coil and 3 exchange discs Height x Width x Depth max. shrinking height Rating Power Weight 1588 mm mm Volt / A KW kg ISG x 310 x / ISG x 310 x /

55 . Inductive Shrinking Machine Clamping tools Other inductive shrinking machines in different versions, e.g. with higher output are available on request. Please send us your enquiry! ISG 300 WK 1589 Automatic adjustment of cooling and drying duration. Machine with 1 litre of concentrated coolant. For cooling, cleaning, and maintaining shrinking chucks. Suitable tool holders see cat.-no for HSK 63/80/100 a tool holder is not necessary. Fluid Cooling System FKS Tool holder ST 30/40 for fluid cooling units FKS tool holder ST 50 for fluid cooling units FKS Coolant concentrate 1 litre Height x Width x Depth Compressed-air connection Weight 1589 mm bar kg FKS 640 x 310 x 390 6,5 01 Tool holder ST 30/40 0 Tool holder ST Coolant concentrate 1L Cooling adapter In order to minimise the cooling-down time, the cooling adapters are made of aluminium, they completely enclose the hot chucking area and are Cooling Adapter for Shrinking Machine equipped with cooling fins. The chuck's temperature has decreased enough after only 60 seconds that the chuck can be touched by hand Toolholders Cooling adapter Toolholder Ø ST HSK-A mm 3-5 slim , , , Length adjustment with 0,01 mm increments. Length adjustment sleeve for determining the overhang. Length Adjustment Sleeve Adjust the push rod to the desired length, insert the cutting tool into the borehole and clamp it against the plastic stop. Insert the tool into the warmed-up chuck for Ø Overhang mm mm for Ø Overhang mm mm

56 Assembling Aids Tool Pre-Setters 1745 Assembling Aids Swivelling, for assembling tools without reclamping. For assembling and disassembling of ST toolholders Mount 1745 ST Assembling Aids Aluminium cast iron housing. Easily accessible from the back. Vertical tapered mounting hole for tool holders. Horizontal mount for draw-in bolts, coolant tubes, etc. For safe assembly and disassembly of cutting tools and tool holders for for for 1746 Taper Size Shape ST/MAS-BT ST/MAS-BT ST/MAS-BT VDI VDI VDI VDI solid-clamp - basic body Aluminium basic body for exchangeable tool holders. 4 x 90 indexable holders. Low force necessary due to perfect ergonomics. For safe assembly and disassembly of cutting tools and tool holders. Assembly support solid-clamp for for for 1746 Taper Size Shape HSK 3 A/C/E/F 108 HSK 40 A/C/E/F 109 HSK 50 A/C/E/F 110 HSK 63 A/C/E/F 111 HSK 80 A/C 11 HSK 100 A/C solid-clamp - tool holders for for Taper size Basic body Tool holder ST/MAS-BT/CAT Tool holder ST/MAS-BT/CAT Tool holder ST/MAS-BT/CAT Tool holder HSK-A Tool holder HSK-A Tool holder HSK-A Tool holder HSK-A Tool holder HSK-A Tool holder VDI Tool holder VDI Tool holder VDI

57 1755 e Robust and reliable tool pre-setters for production. The tools feature great ease of use and perfect measuring accuracy. ergonomic positioning of operating elements, one-hand operation of measuringcarriage, perfect arrangement with selective axisclamping, infinite fine adjustment with micron accuracy, pre-loaded linear guides, protected by bellowsguarantee long service life with constant accuracy, no compressed air required. Tool mount with patented needle bearing guides: plastic cage protects tool spindle from damage, true-running accuracy within microns, ST 40 or ST 50, prevents measuring errors if tool holdersare not brand new (dirty or damaged), long service life and maintenance-free TOOL MASTER TM 10 SMART CMOS S/W with through-light illumination, µm repetability, for easy determination of length and diameter (maximum values), of radii by means of cross hairs, if desired, of angles by means of rotatable template similar to a profile projector, the touch points of the cutting edges at the cross hairs are clearly shown, independent of the operator, high-precision, with a resolution of 0,001 mm, easiest handling by means of touch screen, robust 5,7" colour TFT display with metal housing, languages: English/French/German/Italian/Spanish, 99 reference zero points can be stored, for different reduction and machine zero points, memory for 500 tools, direct and differential measuring, Tool Pre-Setters TOOL MASTER R/D reversible, compensation of axis parallelism, linear and section compensation, display of X and Z axis directly on the monitor all at a glance. easy to set up, password protection TOOL MASTER TCAM Measuring system: precision scales, resolution 0,001 mm. Control: control of all functions by means of a mouse, multi-language dialogues, 99 reference zero points with alphanumerical display can be stored, for different reduction and machine zero points, R/D reversible, direct and differential measuring, measuring programs for calculation of radius, angle and interception, compensation of parallelism, incl. of USB label printer Dymo 400, serial interface (RS 3) for PC and other applications, USB-interface for printers, easy to set up, password protection. Image processing: automatic, detection of cutting edge geometry, independent of position, thanks to CMOS digital camera, detection of length, diameter, angle and radii, automatic and manually selectable measuring methods, additionally: measurements with fixed cross hairs, the display window can be reduced to the required profile, e.g. for progressive dies, display of X and Z axis directly on the monitor all at a glance. Clamping tools incl. of frontal illumination for cutting edge or tool measurements and inspection, similar to measuring microscope with 0-x magnification. Other versions available on request. Accessories see cat.-no TM 10 SMART TM 10 TCAM Measuring range Ø mm Measuring range length mm Tool holder ST 40 / / 50 Touch camera, fixed axes camera, floating axes Magnification approx. 14/x approx. 18/x Display 5,7 inch TFT (colour) 10,4 inch TFT (colour) Measuring system glass measuring rods 1µm glass measuring rods 1µm Axis clamping mechanical mechanical Adapter zero point s Tool memory by means of USB external (optional) 500 Radius / Ø conversion x x Direct / incremental measurements x x Interface Opti. Adapter for USB-Dymo RS3C and USB only for Dymo printer and RS3C Power supply V L x W x H mm 436 x 46 x x 46 x 814 Weight kg Pre-setters 1755 TM 10 SMART / ST TM 10 SMART / ST TCAM / ST TCAM / ST

58 Zero Point Setters Measuring arbors Edge finder Multi-purpose 3-D probes Digital 3D Probes 1756 Accessories for Tool Pre-Setters TOOL MASTER Accessories 1756 Reduction inserts ST 50 / ST Reduction inserts ST 50 / VDI 0 10 Reduction inserts ST 50 / VDI Reduction inserts ST 50 / VDI Reduction inserts ST 40 / VDI Reduction inserts ST 40 / VDI Reduction inserts ST 50 / HSK Adjusting arbor ST x 90 mm 108 Adjusting arbor ST x 90 mm 109 Adjusting arbor ST x 330 mm 110 Adjusting arbor ST x 330 mm Zero Point Setters For quick and esay determination of the reference point in axial direction of machine spindle (e.g. at milling cutters). The instrument is positioned onto the workpiece and the tool (e.g. milling cutter) is moved onto the spring based probe surface, until both pointers of the dial shows 0. Lower edge of the tool is now precisely positioned 500,01 mm above workpiece surface. Size 50 mm will be stored into machine control data system. Basic body and probe insert are case-hardened HRC 60 +/- 1. With measuring certificate, in wooden case Resolution of Height of spring Probe surface Ø Housing Ø 1766 Dial indicator mm measuring surface mm mm mm 0,01 49, Tapered shank more accurate than AT3, case-hardened steel hardened (56+4 HRC), ground. In wooden box. For aligning and inspecting tool spindles. Measuring arbors (Test arbors) With lock ring. Taper Shank Ø D usable measuring length L Concentricity and Ø Tolerance 1764 mm mm mm ST 40 DIN , ST 50 DIN 69871/BT , HSK 63 DIN , Performance requires quality. Dial indicators by ATORN: ATORN s high-quality measuring tools

59 1767 Metric Edge Finders JC-0 Clamping tools 0 Battery operated edge finder made by Renishaw, is chucked by a collet chuck or milling cutter mount. As soon as the probe insert contacts the workpiece, a red light is activated. Only electrically conductive materials can be contacted. The edge finder can be used for different measuring jobs and for zero point setting of workpieces on all manual and CNC-controlled machine tools. Features: inside and outside measuring, determination of borehole centre point centrically to working spindle, measuring reference edges, height and depth measuring. Repeatability 0,001 mm. Overrun X, Y 15 mm, Z 5 mm, protection rating: IP 44 Spare batteries see cat.-no ,8 MIN Ø 6,0 4,5 65,5 5 Ø 8 RENISHAW Ø Multi-purpose 3D Probes Proven metal mechanism, compact design, dustproof and waterproof, comfortable adjustment of concentricity, one scale for radial and axial touching. Technical specifications: Clamping shank: 0 mm, Accuracy of reading: 0,01 mm, Spherical tip Ø: 4 mm. Incl. of short contact point. For determing workpiece zero points, measurements of length, boreholes, borehole centres, and reference edges. Multi-purpose 3-D Probes Milling cutter mount extra short, DIN AD, Ø 0 mm, A = 40 mm, see cat.-no Contact point insert, short, Ø 4 mm, Length 5 mm Contact point, long, Ø 8 mm, Length 65 mm D probes 101 Contact point insert, short 10 Contact point insert, long Digital 3D Probes A further development of the well experienced mechanical 3-D probe. The measuring procedure can be watched accurately on the digital dial. The dial consists of a 0,001 mm display with large digits. Measuring accuracy 0,005 mm, mm/inch-conversion, clamping shank Ø -0 mm, housing Ø 65 m. Dust and splash-proof. Suitable milling cutter mounts see cat.-no Suitable contact points see cat.-no

60 Edge finder Dial Indicating Centre Finders Centre Finders Edge Finders All parts hardened, chucking- and working surfaces ground, partly lapped. Tension spring inside provides elastically compensating connection to upper part of shaft. In case. For the determination of the centre line With single-point contact head With double-point contact head Spare spring For cat.-no Measuring head Ø Straight shank Ø pack = mm mm pcs. Edge finder single Edge finder double Spare spring With all-round illuminated indicator. The ball is elastically suspended and is pushed to the side when the reference edge is reached. Accuracy +/- 0,01 mm. Standard: edge finder with battery. For centring the spindle above the workpiece. For outside and inside centring. Electrical edge finder D/3D Spare batteries see cat.-no Shank Ø Spherical tip Ø Battery 177 mm mm V D 0 10 x 1,5 (Lady size N) 101 3D x 1, DIACATOR With built-in upright dial indicator and rotating probe, max. centring error depending on probe 0,006-0,01 mm. Built-in overload clutch to protect against damage. Mounts on screw-on MT 1 morse taper shank (for larger taper holes, use adapters!) or on a straight shank (8 mm Ø). Complete with pendulum probe for small holes, angled contact point inserts 5 and 48 mm, 1 reducing sleeve MT 1, 3 screw-on adapter sleeves 10 1 and 16 mm, 1 stop 160 mm and dial indicator, in wooden case. For aligning holes and shafts exactly concentrically with work spindle on milling machines, drill presses and boring mills. Dial Indicating Centre Finders 1773 Special probe, length 100, 15, 150 and 00 mm available on request. Measuring range for inside Ø Measuring range for Outside Ø 1773 mm mm 1,5-10 5,

61 Clamping tools 1774 Centre Finders Centro High-accuracy centre finder with steady dial indicator. Accuracy 0,003 mm. For aligning boreholes. Rotational speed of spindle should not exceed 150 rpm. Concentricity errors of spindle and clamping system can be balanced out Contact point insert Straight, with ball Ø 5 mm Contact point insert Offset, with ball Ø 5 mm Contact point insert Straight, with ball Ø mm. For small boreholes Measuring range Measuring range Shank Ø 1774 inside Ø mm outside Ø mm mm Centro Contact point insert straight 10 Contact point insert offset 103 Contact point insert with ball mm e For centring, positioning, aligning, adjusting, inspecting, face probing, edge finding, accuracy: µm. The very precise mechanism with rotating probe and the fixed dial indicator are the most important parts. Precision Centre Finders Precision Centre Finders C III Similar to cat.-no , but with precision dial indicator with 0,00 mm resolution, for high precision spindles and finest surfaces Precision Centre Finders CO-S With fixed clamping shank, 16 mm Ø, dial indicator with 0,01 mm resolution. 1 contact point insert ball Ø 5 mm (for borehole), 1 bent contact point insert, ball Ø 5 mm (for shaft), in case Precision Centre Finders C III For different clamping shanks (see cat.-no. 1778), dial indicator with 0,01 mm graduation. 1 straight contact point insert ball - Ø 5 mm (for borehole), 1 hexagon socket wrench size 3, bottle of watch oil no. 5, in wooden box. Reading of dial indicator Probing range Probing range Face area Probing depth Probing depth 1775 mm inside Ø mm outside Ø mm mm inside Ø mm outside Ø mm CO-S 0, C III 0, C III 0, Accessories For cat.-no Edge finder For positioning the work spindle axis above workpiece edges or corners Contact point insert Straight, ball Ø 1,7 mm. For centring holes less than 6 mm

62 Clamp Holders Indicator stands Reduction Inserts Sawblade Toolholders 1777 Accessory Kits Consists of: Contact point, Spherical tip Ø 1,7 mm for centring Boreholes below 6 mm. Angled contact point, Spherical tip Ø,5 mm for aligning surfaces from 90 mm - 80 mm Ø. Extensions for enlarging the work range. Face probe Spherical tip Ø 5,0 mm. For type C III cat.-no and Clamp Holders For type CO and C III cat.-no DIN A, without gripper groove Morse taper shank Straight shank DIN 080, cat.-no with lock ring. Taper MT/ Taper ST/ Cylinder-Ø 1778 draw-in thread draw-in thread mm 3/M /M /M /M /M /M Link- Indicator Stand Mechanical centre clamping of all links, clamping power infinitely adustable, each position within working range can be reached. Dial indicator hole 8 mm, length = 40 mm for direct mounting into the machine (collet!). For lever gauges. Suitable for: workpiece positioning, centring of bores/pilots, aligning of workpieces, for difficult to reach areas Lever gauges see cat.-no cont With straight shank in compliance with DIN 1835 B. Concentricity deviation of taper to internal taper 0,005 mm. Used as reduction inserts in milling cutter mounts for milling cutters with small diameters. Reduction Inserts for End Milling Cutters d H 4 d 1 A D l 1634 mm mm mm mm mm d H 4 d 1 A D l 1634 mm mm mm mm mm

63 1635 Spare screws for Weldon Clamping tools 1635 Thread for diameter 1635 mm M M M M M Thread for diameter 1635 mm M M 18 X M 0 X M 0 x Sawblade Toolholders With straight shank for mounting in surface chucks, high true-running accuracy. For chucking sawblades cat.-no. with Ø from mm and sawblade thickness from 0,-6 mm (see cat.-no and ). Sawblades not included Set, 6-part, consists of all sizes of cat.-no , incl. of case Single Set Chucking-Ø mm 6 part 0 / 5 / 3 / 40 / 50 / for saw blade Ø L1 Ø D1 Ø D Ø D mm mm mm mm mm , , , , , , , ,5 308 saw blade Ø Performance requires quality. Multiple clamps by ATORN: ATORN s high-quality clamping tools

64 Driving rings Milling Cutter Draw-In Screws Milling cutter arbor collars 1655 Driving rings For combination milling cutter arbors, cat.-no d 1 for milling cutter arbor Ø d h 1 d 3 h d mm mm mm mm mm , , , , , h 1 d 3 d h 1656 Milling Cutter Draw-In Screws without borehole. For combination milling cutter arbors, milling head mounts, and milling cutters with transverse slot for milling cutter arbors with pilot Ø Draw-in screw thread 1656 mm 10 M M M M M M M Wrench for Milling Cutter Draw-in Screws Special steel, hardened and black finisshed. For tightening the milling cutter draw-in screws DIN for milling cutter arbors with pilot Ø 1657 mm Milling Cutter Draw-In Screws Consists of a stud bolt with hexagon socket (for turning with a hexagon socket key and a threaded collar which screws on to it). For miling cutter arbors, milling head mounts, and milling cutters with transverse slot Tremendous gripping power is achieved by the different pitches on the stud bolt. When screwing down, the threaded collar bears against the face of the milling cutter and does not turn with the stud bolt any more. No damage to the milling cutter, and less axial and radial eccentricity! d ; ; l 3 r l d 1 SW for milling cutter arbors with pilot Ø Draw-in screw thread Thread length Allen Key threaded collar Ø x Thickness 1659 mm (d 1 ) (l ) mm size mm (d x l 3 ) mm 16 M 8 13,0 5 0 x M 10 14,4 6 8 x M 1 17, x M 16 0, x M 0 4,0 1 5 x

65 1665 Milling Cutter Arbor Collar Sets Clamping tools Punched type, in plastic pouch. For preventing the milling cutters on milling cutter arbors from laterally shifting Assortment A, 60 pcs Assortment B, 35 pcs. Contents: Collar width mm 0,03 0,04 0,05 0,1 0, 0,3 0,5 0,6 1,0 1,5 Stückzahl gesamt Assortment A, no. of pcs. no. of pcs Assortment B, no. of pcs. no. of pcs Assortment A Borehole 1665 mm Assortment B Borehole 1665 mm Milling Cutter Arbor Collars Made of sping-tempered strip steel, punched and deburred. Keyway in compliance with DIN 138. For preventing the milling cutters on milling cutter arbors from laterally shifting Borehole 16 mm mm 7 mm 3 mm 40 mm 50 mm Size mm 0, , , , , , , , , Milling Cutter Arbor Collars Turned from steel, hardened, face is ground parallel and lapped. Keyway in compliance with DIN Borehole 16 mm mm 7 mm 3 mm 40 mm 50 mm Size mm Performance requires quality. Swivel bases by ATORN: ATORN s high-quality turning tools

66 Revolving head Quick-change toolholder x Revolving Head (RD) and Multi-purpose Quick-change Toolholder (UD) Precise production thanks to the high repeatability and turn down precision (0,005 mm). No change of tools: internal and external fit with one clamping procedure. Quick-clamping mechanism - for type RD, graduation 9 with 40 positions. Available in 4 sizes. Up to 4 tool holders can be clamped at any one time. For machining precise turning parts thanks to highprecision tool exchange system with perfect user friendliness. Quick-change toolholder see cat.-no Parat 4-x revolving head type RD Clamping of 4 tool holders is possible. Manual pivoting, graduation catching every 9 = 40 positions. Wrench, double-ended gooseneck socket wrench, socket wrench Parat 4-x revolving head with internal coolant feed type RD/ICF Clamping of 4 tool holders is possible. Manual pivoting, graduation catching every 9 = 40 positions. Wrench double-ended gooseneck socket wrench, socket wrench, clamping screw with Inner hole, coolant hose, connector, angled connector, screw Parat -x multi-purpose quick-change toolholder type UD Budget version of type RD. For mounting tool holders, rotated 90. Tool holders are compatible with RD. Double-ended gooseneck socket wrench, socket wrench. Technical specifications for determining size Size Driving power lathe max. KW 3,7 7,4 14,7 Turning tool diameter max. A Tool cutting height B Tool slide width min. C Revolving head (square-end basic body) D Index plate with protective ring Ø E Turning range with tool holder Ø G Clamping screw in support J M 14 x M 16 x M 0 x,5 M 4 x 3 K Weight approx. (without tool holder) kg 3,5 6,5 15 RD RD/ICF UD Size

67 Quick-change Toolholder Clamping tools Accessories for cat.-no Quick-change toolholder type WD For internal and external machining Quick-change toolholder type WBW (unfinished) With soft, untreated clamping area for special tools Quick-change toolholder type WDL For internal machining Quick-change toolholder type WDR For external machining Quick-change toolholder type WDPL For boring bars Quick-change toolholder type WB For mounting clamping sleeves (see cat.-no ) size N O P R S U kg WD 1/ ,7 WDL/WDR 1/ ,8 WD 1/ ,8 WDL/WDR 1/ ,9 WDPL 1/ ,9 WB/WBW 1/ ,8 WD / ,9 WDL/WDR / ,1 WDPL / ,3 WB/WBW / ,8 WD 3/ ,0 WDL/WDR 3/ ,4 WDPL 3/ ,6 WD 3/ ,1 WDL/WDR 3/ ,4 WB/WBW 3/ ,7 WB/WBW 3/ ,5 WD 4/ ,0 WDL/WDR 4/ ,8 WDPL 4/ ,5 WD 4/ ,5 WDL/WDR 4/ ,0 WB/WBW 4/ ,0 WD WDL WDR WDPL Size for revolving head/size 1/1 type RD/1 and type UD/ /0 type RD/1 and type UD/ /5 type RD/ and type UD/ /3 type RD/3 and type UD/ /40 type RD/3 and type UD/ /40 type RD/4 and type UD/ /50 type RD/4 and type UD/ WB WBW Size for revolving head/size 1/30 type RD/1 and type UD/ /40 type RD/ and type UD/ /40 type RD/3 and type UD/ /50 type RD/3 and type UD/ /60 type RD/4 and type UD/

68 Clamping sleeves Taper Bore Cleaners Clamping Sleeves 1877 Clamping sleeves for quick-change toolholder type WB (see cat.-no. 1875) For mounting tools with MT shank Clamping sleeves, slotted, for quick-change toolholder type WB (see cat.-no. 1875) For clamping tools with straight shank. For MT Quick-change toolholder WB 1/ WB 1/30 10 WB +3/ WB +3/ WB 3/ WB 3/ WB 4/ WB 4/ For inside Ø Quick-change toolholder mm WB 1/ WB 1/ WB 1/ WB 1/ WB 1/ WB 1/ WB 1/ WB +3/ WB +3/ WB +3/ WB +3/ WB +3/ WB +3/ WB +3/ WB 3/ WB 3/ WB 3/ WB 3/ WB 4/ WB 4/ WB 4/ Taper Bore Cleaners Made of impact-proof, fleece-covered plastics, inserted into guides, does not rotate. Most resistant against oil and grease, high grade of tolerance stability. For quick and thorough cleaning of tool adapters. 950 For morse taper shank 951 For ST. 955 For HSK tool mountings For cylindrical tool mountings and bores. For taper 950 MT For taper 955 HSK For taper 951 ST Str. 956 TKC

69 Performance requires quality. Short chucks by ATORN: ATORN s high-quality clamping tools. 1.69

70 Toolheads Toolholders 0 Quick-change Toolholder cat.-no Toolhead and toolholder profile-ground. The tool height can be adjusted using a knurled thumbscrew on the toolholder without inserting shims. Repeatability 0,01 mm. The toolholders can easily be released and locked into position using an eccentric clamping lever Tool can be set to 40 different angles. East to operate short set-up times! Installation on the lathe: The toolhead with ground tetth is fastened using the slide bolt. The inside diameter of the centring bolt must than be turned to the size of the slide bolt (snug fit not required). We recommend aligning the toolhead perpendicularly to the face plate, with the boring bar holder and boring bar positioned. The toolhead is secured by two dowel pins in the slide. Then set the scale to 0 and tighten the nut on the slide bolt accordingly. When choosing the size, please consider the following: 1. Driving power of lathe.. Minimum dimension required x. 3. The length of the toolholder»i«should correspond with width z of the top support. 4. Tool height h. can be calculated from tool height h and tool height y and the space below (see table). When the tool height h is (see table), the tool height x has to be at least (see table): Example for a size choice: Machine drive power KW 6 Machine swing mm 500 Slide width z mm 145 Tool height h mm 30 Tool cutting height x mm 45 Parts needed: Tool head size B (cat.-no ) Tool holder type B D 3 x 140 (cat.-no ) Tool holder type B H 30 x 130 (cat.-no ) Tool holder type B J 40 x 10 (cat.-no ) Tool holder type BA-Aa (cat.-no ) The borehole of the centring disc must be enlarged to be at least as big as the clamping screw. Size Aa A E B C D 1 Tool height x x x x x x h mm D 1 D 16 D 0 D 0 D5 D 5 D 3 D 3 D 40 D 45 D 40 D 50 D ,5 6 (14) , , , , (30) Technical specifications: Size Aa A E B C D 1 Tool holder size D 1 D 16 D 0 D 0 D 5 D 5 D 3 D 3 D 40 D 45 D 40 D 50 D 63 Machine drive power approx. kw 1,, 5,0 6,6 13,,0 Machine swing Slide width max. z mm Tool cutting height min. x mm h + y h + y h + y h + y h + y h + y Tool cutting height max. mm x + hv x + hv x + hv x + hv x + hv x + hv Height adjustment hv mm Steel tool support y mm 6, 9,1 10,1 10, , ,5 Support width for cutting tool d mm ,5 30, Height of cutting tool max. h mm 1 Overall width max. v mm Overall height s mm Overhang max. u mm Borehole standard t mm Borehole max. t max. mm Depth of borehole max. e mm Weight without tool holder kg 0,34 1, 3,5 4,5 10,7 18,

71 Clamping tools Toolheads a For mounting toolholders. Spare parts see cat.-no Size 1880 Aa 101 A 10 E 103 B 104 C 105 D Z hv x y h d u v s r t t max e For mounting tool bits with square shank. Toolholders D 188 l 1 for a l Size mm mm Aa D 1 x 50 Aa A D 0 x 75 A A D 0 x 90 A E D 0 x 100 E E D 5 x 100 E B D 5 x 10 B B D 5 x 140 B B D 3 x 10 B B D 3 x 140 B For mounting tool bits with round shank. Toolholders H for a l Size mm mm C D 3 x 150 C C D 3 x 170 C C D 40 x 150 C C D 40 x 170 C C D 45 x 170 C D 1 D 40 x 180 D D 1 D 50 x 180 D D 1 D 63 x 180 D l 1 d max for d max l Size mm mm Aa H 1 x 50 Aa A H 0 x 85 A E H 30 x 100 E B H 30 x 130 B Toolholders J 0 For mounting boring bars und round tool bits. for d max l Size mm mm C H 40 x 160 C C H 50 x 160 C D 1 H 63 x 180 D d l 1 for Borehole d l Size mm mm Aa J 15 x 50 Aa A J 30 x 80 A E J 30 x 100 E E J 40 x 100 E for Borehole d l Size mm mm B J 40 x 10 B C J 40 x 160 C C J 50 x 160 C D 1 J 63 x 180 D

72 Sleeves Prism Inserts Cutting-Off Toolholders Square Mounts 1888 Sleeves L 0 With internal taper. For boring bar toolholders cat.-no for d taper 1888 Size mm MT L 30 x A/E L 40 x 3 E/B/C L 40 x 4 B/C L 50 x 3 C L 50 x 4 C L 63 x 5 D MK d For tool holder cat.-no Prism Inserts P 1894 for d max. l Size mm mm A P 14 x 85 A E P 14 x 100 E B P 0 x 130 B C P 5 x 160 C C P 3 x 160 C D 1 P 40 x 180 D d max l For mounting KOMET cutting-off tool bits. Cutting-Off Toolholders A 1896 for KOMET cross-section 1896 Size Size mm AA-AO A A0 10 x,7 01 EA-AO E A0 10 x,7 0 BA-Aa B Aa 16 x 4/3 03 CA-A3a C A3a 18,5 x 5/ For cat.-no and Spare Parts for Toolholders 1898 Description for Toolholder 1898 Clamping lever 8 mm Aa 01 Clamping lever 1 mm A 0 Clamping lever 17 mm E/B/C 03 Clamping lever mm D 1 04 Square head screw Aa 10 Square head screw A/E 11 Square head screw B 1 Square head screw C/D 1 13 Height adjustment screwwith nut Aa 301 Height adjustment screwwith nut A/E 30 Height adjustment screwwith nut B 303 Height adjustment screwwith nut C 304 Height adjustment screwwith nut D

73 Clamping tools. VDI Toolholders in Compliance with DIN MnCr5 hardened to 60 +/- HRC. Working surfaces ground. With point ball nozzle and thread nipple for pipe fittings. 1 Shapes B1 and B5 Shapes B and B6 3 Shapes B3 und B7 4 Shapes B4 und B8 5 Shape C1 6 Shape C 7 Shape C3 8 Shape C Short type. For external machining. For square tools. Square Transverse Mounts Shape B1/B 1903 Shape B1, radial, clockwise Shape B, radial, counterclockwise Shank d b b 1 b h 1 h h 3 h 4 l l mm mm mm mm mm mm mm mm mm mm ,0 30, , ,0 35, , ,5 4, , ,0 50, , Short type. For overhead work. For square tools. Square Transverse Mounts Shape B3/B Shape B3, radial, clockwise Shape B4, radial, counterclockwise Shank d b b 1 b h 1 h h 3 h 4 l l mm mm mm mm mm mm mm mm mm mm ,0 30, , ,0 35, , ,5 4, , ,0 50, , Long type. For external machining. For square tools. Square Transverse Mounts Shape B5/B Shape B5, radial, clockwise Shape B6, radial, counterclockwise Shank d b b 1 b h 1 h h 3 h 4 l l mm mm mm mm mm mm mm mm mm mm ,0 65, , ,5 65, , ,0 80, ,

74 Square Mounts Twist Drills with Reversible Cutting Inserts Boring bar mounts Long type. For overhead work. For square tools. Square Transverse Mounts Shape B7/B Shape B7, radial, clockwise. 191 Shape B8, radial, counterclockwise Shank d b b 1 b h 1 h h 3 h 4 l l mm mm mm mm mm mm mm mm mm mm ,0 65, , ,5 65, , ,0 80, , Short version, shape C1, axial, clockwise. For face recessing. For square steel bars. Square Longitudinal Mounts Shape C Shank d b b 1 h 1 h h 3 h 4 l l 1 l 1915 mm mm mm mm mm mm mm mm mm mm 0 5 5, , , , , , , , , , , Short version, shape C, axial, counterclockwise. For face recessing. For square tools. Square Longitudinal Mounts Shape C 1916 Shank d b b 1 b h 1 h h 3 h 4 l l 1 l 1916 mm mm mm mm mm mm mm mm mm mm mm ,0 40, , ,0 41, , , ,5 47, , , ,5 55, , , Short version, shape C3, axial, clockwise. For overhead face recessing. For square tools. Square Longitudinal Mounts Shape C Shank d b b 1 h 1 h h 3 h 4 l l mm mm mm mm mm mm mm mm mm , , , ,5 85 1, , ,

75 1919 Short version, shape C4, axial, counterclockwise. For overhead face recessing. For square tools. Square Longitudinal Mounts Shape C4 Clamping tools 1919 Shank d b b 1 b h 1 h h 3 h 4 l l 1 l 1919 mm mm mm mm mm mm mm mm mm mm mm ,0 43, , ,0 41, , , ,5 47, ,5 85 1, ,5 50, , , With internal coolant feed, shape E1, axial. Mounts for Twist Drills for Reversible Cutting Inserts Shape E1 For mounting twist drills for reversible cutting inserts. 190 Shank d d 1 D D 1 h l l 1 Boring depth 190 mm mm mm mm mm mm mm mm , , , , , , , , , , , , , With coolant feed via spray nozzles, shape E, axial. Boring Bar Mounts Shape E For mounting boring bars. 19 Shank d d 1 D D 1 h l l 1 19 mm mm mm mm mm mm mm , , , , , , , , , , , , , , , , , , , , , , , , , , ,

76 Collet chucks Short chucks Morse taper shank mounts 194 Coolant feed via collet, shape E3, axial. For centring and drilling. OZ Collet Chuck E3 OZ collets see cat.-no Shank d D D 1 h l l 1 Clamping range Ø for collets 194 mm mm mm mm mm mm mm type , E/415 E , E/46 E , E/46 E , E/467 E , E/467 E Coolant feed via the collet, shape E4, axial. For centring and drilling. ER Collet Chuck E4 ER collets see cat.-no Shank d D D 1 h l l 1 Clamping range Ø for collets 196 mm mm mm mm mm mm mm type , ER/ESX 5/430 E , ER/ESX 5/430 E , ER/ESX 3/470 E , ER/ESX 3/470 E , ER/ESX 40/47 E Short Chucks Short type, wear parts hardened and ground, high true-running accuracy. Wrench with T-handle for high power Shank d Clamping range D L mm mm mm mm 0 1, , ,

77 199 0 Short type, wear parts hardened and ground, high true-running accuracy. Wrench with T-handle for high power. Short Chucks 1-16 mm Clamping tools 199 Shank d1 Clamping range D A mm mm mm mm Short Chucks 0 Short type, wear parts hardened and ground, high true-running accuracy. Wrench with T-handle for high power. 198 Shank d Clamping range D L L 1 max. weight mm mm mm mm mm kg 30 0, , , , , , , , Shape F1, axial. For mounting tools with MT shank. Morse Taper Shank Mounts Shape F Shank d MT D D 1 h l l mm mm mm mm mm mm , , , , , , , , , ,

78 Tapping Chucks Cutting-Off Toolholders Workpiece stops Bar gripper Reduction sleeves Unfinished parts Protection Caps 1935 Tapping Chucks With Length compensation in response to compression and tension. For mounting quick-change tapping chuck sleeves. Quick-change sleeves see cat.-no ) Clamping ring, ) Insert mount Size Shank d h 6 for taps l 1 d 1 d Length compensation 1935 mm mm mm mm compr./tension mm 1 0 M / M / M / M / M /15 05 Tapping Chucks With Length compensation in response to compression and tension. For mounting collets with inner square Collets see cat.-no Shank d D D 1 h 3 l d 1 Taps Length compensation 1937 mm mm mm mm mm mm , M 4 - M , M 4 - M Cutting-Off Toolholders With mount for cut-off blades. h1 l d A B 1940 Cut-off blades see cat.-no and b b C Shank d b b h 1 l Diagram 1940 mm mm mm mm mm ,0 6,0 50 A = clockwise ,0 6,0 50 B = counterclockwise ,0 6,0 50 C = overhead ,5 3,0 50 A = clockwise ,5 3,0 50 B = counterclockwise ,5 3,0 50 C = overhead Workpiece Stops Live exchangeable stop surface with length adjustment. For the exact positioning of workpieces. h3 d 194 D D1 D l Shank d D D 1 D h 3 l 194 mm mm mm mm mm mm , /80 3,

79 l Clamping tools 1947 Bar Gripper Complete with sets of gripper jaws. The bar gripper is used primarily as a gripper chuck for advancing bars. This eliminates the use of a bar feed unit and workpiece stop. d1 h1 l1 DIN l l3 d-d3 b b Shank VDI d1 Clamping range 1 d Clamping range d3 b1 b h1 l1l (stroke) l mm mm mm mm mm mm mm mm mm Reduction Sleeves Suitable for tool holder shape E, see cat.-no. 19. Compatible with internal coolant feed. For reduction of tools with straight shank e.g. boring bars and fine turning tools. 193 d 1 d L 193 mm mm mm d 1 d L 193 mm mm mm Unfinished Parts A Round, unhardened, but with hardened and ground shank, dimensions in compliance with DIN part - shape A Shank d D l 1901 mm mm mm Protection Caps To protect empty mounts in the revolving head Made of plastics. d Made of steel. h 1 d 3 Shank d 1 d 3 h 1 l mm mm mm mm , ,

80 Driven tools for CNC lathes Precision tools, made in Germany All tools are thoroughly tested on several levels on our test bed, in order to inspect operating temperature, tightness, noise emission, and concentricity. Each component is machined to highest precision on our own machine tools. mimatic mi modular tool holders The mi-interface is based on the HSK: short taper with face rest. The mi-system offers the following: internal coolant flow continuous tool clamping system tool presetting concentricity accuracy < 0.00 mm quick-change An option for all driven tools

81 Driven tools for CNC lathes and machining centres are available for all renowned manufacturers: mimatic also offers multi-spindle tools and other solutions. For you enquiry, please use the form provided at Quality features of the driventools of mimatic most of the time, with 3-x spindle bearing plus needle bearing guides most of the time, monoblock design of highest rigidity low-friction seals Internal or external coolant feed ground cogwheels for long service life with adjustable face clearance

82 Performance requires quality. A-Cut recessing systems by ATORN: ATORN s high-quality turning tools.

enduring. Drill Chucks NC-Tooling 2013/2014

enduring. Drill Chucks NC-Tooling 2013/2014 enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

Performance requires quality.

Performance requires quality. 131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

More information

Driven Toolholders for MAZAK Machines

Driven Toolholders for MAZAK Machines Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

Good reasons to use Albrecht drill chucks

Good reasons to use Albrecht drill chucks 3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

More information

SHRINK FIT CHUCKS CAT BT HSK CAPTO.

SHRINK FIT CHUCKS CAT BT HSK CAPTO. SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink

More information

HIGH PRECISION HIGH PERFORMANCE

HIGH PRECISION HIGH PERFORMANCE Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility

More information

Solid carbide Twist Drills Overview

Solid carbide Twist Drills Overview Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ

More information

BEST OF A selection of our most popular products. To view the complete range visit

BEST OF A selection of our most popular products. To view the complete range visit BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are

More information

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit

More information

Standard Programme Clamping Technology. The tool specialists for the trade.

Standard Programme Clamping Technology. The tool specialists for the trade. Standard Programme Clamping Technology The tool specialists for the trade. Direction Leipzig 4 Direction Dresden Direction Erfurt Chemnitz 72 95 The tool specialists for the trade. WTE Präzisionstechnik

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your

More information

ER Collets Nuts Disks

ER Collets Nuts Disks Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50

More information

Taper shank arbors for drill chucks

Taper shank arbors for drill chucks KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole

More information

ACE LOCK Milling Chucks

ACE LOCK Milling Chucks ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter

More information

Live and Dead Centres

Live and Dead Centres s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for

More information

CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG

CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders

More information

Geared scroll chuck with optimized design

Geared scroll chuck with optimized design Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

tough. Live Centers Face Drivers 2013/2014

tough. Live Centers Face Drivers 2013/2014 tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers

More information

PROVEN CHUCK WITH SPIRAL RING

PROVEN CHUCK WITH SPIRAL RING PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping

More information

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6 NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules

More information

Geared scroll chuck with optimized design

Geared scroll chuck with optimized design Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle

More information

Industrial Drill Chucks & Live Centers

Industrial Drill Chucks & Live Centers Since 1957 Industrial Drill Chucks & Live Centers 2 From our headquarters in the province of Barcelona, Spain, Llambrich Precision, S.L. has been designing and manufacturing drill chucks and machine tool

More information

HSK F80 MAKINO S HRINK FIT C H UCK S

HSK F80 MAKINO S HRINK FIT C H UCK S Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4

More information

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420) HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16

More information

HPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System

HPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of

More information

Swiss Automatic Tooling

Swiss Automatic Tooling Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets

More information

FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!

FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY! INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC

More information

Tradition in Perfection.

Tradition in Perfection. Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded

More information

Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12

Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12 1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested

More information

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units. For toolmaking, fixture manufacturing and machine engineering Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

More information

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form

More information

KTA SPINDLE TOOLINGS

KTA SPINDLE TOOLINGS Price INR R 2013 KTA SPINDLE TOOLINGS SILVER SERIES PRECISION TOOL HOLDERS FOR CNC MACHINES HSK DIN 69893-1 FORM A Features : Special Material with Tensile NEW 2 strength inthe Core Min 950 N/mm. Case

More information

Chuck size

Chuck size URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck

More information

CAT Shank Tools & Tightening Fixtures

CAT Shank Tools & Tightening Fixtures INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse

More information

QUICK-ACTING JAW CHANGE SYSTEM

QUICK-ACTING JAW CHANGE SYSTEM QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire

More information

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent ) SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the

More information

Clamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3

Clamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3 equipment rill chucks Reducing bushes Centre points Front-face carrier From page 40-3 and-operated chuck Power chuck Collet chuck ydraulic cylinder From page 40-17 Jaws Slot nuts From page 40-34 ssembly

More information

Leading the Way... In CNC Tooling Technology in the 21 st Century

Leading the Way... In CNC Tooling Technology in the 21 st Century Leading the Way... In CNC Tooling Technology in the 21 st Century Leading the Way... In CNC Tooling Technology in the 21 st Century We specialize in CNC tooling and workholding devices for horizontal and

More information

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P: PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters

More information

Gauge Blocks - Reference for Precision

Gauge Blocks - Reference for Precision ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

BMT 65 TOOLING BENZTOOLING.COM

BMT 65 TOOLING BENZTOOLING.COM BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s

More information

BMT LIVE & STATIC TOOLING

BMT LIVE & STATIC TOOLING BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835

More information

GUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner

GUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY

More information

STANDARD PROGRAMME Hydraulic Chucks

STANDARD PROGRAMME Hydraulic Chucks 20 STANDARD PRORAMME STANDARD PRORAMME 23 Hydraulic Chuck ISO 7388-1, Form AD (prev. DIN 69871-AD), extra short design d 1 d 2 d 3 l3 ISO 7388-1 Form AD 3 µm h6 2.5 25000 min Nominal size SK/ISO Dimensions

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

BORING SYSTEMS INFO. 3 nd edition

BORING SYSTEMS INFO. 3 nd edition BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll

More information

Driven Toolholders for HAAS Machines

Driven Toolholders for HAAS Machines riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool

More information

COMPANY INTRODUCTION

COMPANY INTRODUCTION COMPANY INTRODUCTION Uncompromising Quality Utilizing State-of-the-Art Facilities and Equipment DMG-MORI Multitasking CNC Machines The work piece is completed in a single set-up. Assures the best qualities

More information

NAKAMURA TOME LIVE TOOLING

NAKAMURA TOME LIVE TOOLING NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000

More information

JAWS INDIVIDUALLY ADJUSTABLE

JAWS INDIVIDUALLY ADJUSTABLE JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072

More information

WINNER! ALBRECHT. Precision Chucks

WINNER! ALBRECHT. Precision Chucks WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate

More information

Geared scroll chucks with independently adjustable jaws

Geared scroll chucks with independently adjustable jaws Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,

More information

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti

More information

PROVEN CHUCK WITH SPIRAL RING

PROVEN CHUCK WITH SPIRAL RING PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping

More information

ANGLE HEADS & SPINDLE SPEEDERS

ANGLE HEADS & SPINDLE SPEEDERS & SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119

More information

Multi-Lock Milling Chuck

Multi-Lock Milling Chuck Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting

More information

Total Tooling Systems 2011

Total Tooling Systems 2011 Made in Switzerland Swiss Precision Tools Total Tooling Systems 011 Company founder Fritz Weber Made in Switzerland Company History since 1950 The REGO-FIX company history has been strongly influenced

More information

powrgrip for mold & die Trustworthy toolholding solutions

powrgrip for mold & die Trustworthy toolholding solutions powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and

More information

Tooling for Swiss Automatics

Tooling for Swiss Automatics Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical

More information

powrgrip System The ambitious toolholding system Product catalog

powrgrip System The ambitious toolholding system Product catalog powrgrip System The ambitious toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Product offering 04 Discover powrgrip 06 Automatic clamping unit PGU 07

More information

Standard Programme Common Price List 2016 CLAMPING TECHNOLOGY. The tool specialists for the trade.

Standard Programme Common Price List 2016 CLAMPING TECHNOLOGY. The tool specialists for the trade. Standard Programme Common Price List 2016 CLAMPING TECHNOLOGY The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction HIGH PRECISION MADE IN GERMANY WITH COURAGE TO INNOVATE! WTE Präzisionstechnik

More information

TURNING AND MILLING IN ONE SET-UP

TURNING AND MILLING IN ONE SET-UP TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The

More information

BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group

BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40

More information

Cutting

Cutting wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist

More information

CnC woodworking Collets

CnC woodworking Collets CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ

More information

Pneumatic spindles Pneumatic built-in motors

Pneumatic spindles Pneumatic built-in motors Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial

More information

BT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95.

BT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95. BT Shank Tools BT30.................................................................................E2 E18 BT40................................................................................E20 E60 BT50................................................................................E62

More information

LATHE CHUCKS INDEPENDENT CHUCKS

LATHE CHUCKS INDEPENDENT CHUCKS LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and

More information

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4 FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp

More information

Quick-change adapters, positive drive inch sizes

Quick-change adapters, positive drive inch sizes P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with

More information

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN

More information

POWER CHUCKS CYLINDERS / STEADY RESTS

POWER CHUCKS CYLINDERS / STEADY RESTS POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive

More information

DOOSAN LIVE & STATIC TOOLING

DOOSAN LIVE & STATIC TOOLING DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800

More information

LVE - with integrated pneumatic cylinder

LVE - with integrated pneumatic cylinder LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic

More information

PENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features

PENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme

More information

Keyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors

Keyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose

More information

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of

More information

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001 AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE

More information

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001 SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191

More information

USE-USU. Steel independent chucks. Steel independent chucks USE-USU

USE-USU. Steel independent chucks. Steel independent chucks USE-USU USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually

More information

The best in your hands

The best in your hands The best in your hands ALBRECHT Precision Drill Chucks Okay: The best drill chuck in your hands those are pretty strong words. However, we are sure of this. When we invented the self-tightening drill chuck

More information

Quality Tools and Machines DRILLING PUNCHING CUTTING DEBURRING

Quality Tools and Machines DRILLING PUNCHING CUTTING DEBURRING Quality Tools and Machines DRILLING PUNCHING CUTTING DEBURRING 21 2USA All over the world www.alfra.us Made in Germany for the USA Index Drilling Punching Cutting Deburring Rotabest t Metal Core Drilling

More information

Radial Drilling And Milling Heads TYPE HAAS

Radial Drilling And Milling Heads TYPE HAAS Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106

More information

GTO Precise, universal stationary chuck for collets

GTO Precise, universal stationary chuck for collets Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest

More information

CAPTIS. The modular and flexible system for internal and external clamping

CAPTIS. The modular and flexible system for internal and external clamping NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high

More information

Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches

Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches 8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud

More information

Standard Parts for Mould Making

Standard Parts for Mould Making Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves

More information

ZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS

ZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on

More information

ZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy

ZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high

More information

Info Overview - solid carbide twist drills (I) Drilling Tools

Info Overview - solid carbide twist drills (I) Drilling Tools Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number

More information

The Finest Spindle speed

The Finest Spindle speed DESCRIPTION MODEL Distance between centers UNIT G5P-50M/NC 500(0 ) G3P/G38P(M&NC) 60M / NC 100M / 100NC 150M / 150NC 00M / 00NC 600(4 ) 1000(40 ) 1500(60 ) 000(80 ) SUPERTEC Since 1954 GENERAL Swing over

More information