Creusen Professional Floor-standing/Bench Drill Presses 8000
|
|
- Arline Stafford
- 6 years ago
- Views:
Transcription
1 Creusen Professional Floor-standing/Bench Drill Presses 8000 A series of floor-standing and benchtop drill presses for the professional user featuring the qualitythat you can expect from Creusen. The models are equipped as standard with chuck taper, spindle taper and chuck guard.
2 Creusen Professional Benchtop Drill Presses 8000 TB ~ Voltage: 230V 1~ Hz art Power: 375 W Speed: rpm Drilling capacity: 1-13 mm Spindle taper: 2 max. capacity: 13 TB ~ Voltage: 230V 1~ Hz art Power: 550 W Drilling capacity: 1-13 mm Spindle taper: 2 max. capacity: 16 Key to codes TB benchtop drill press 813 series 8000 / series 8000 / series 8000 / 20 TB ~ Voltage: 230V 1~ Hz art Power: 750 W Drilling capacity: 3-16 mm Spindle taper: 3 max. capacity: 20 TB ~ Voltage: 400V 3~ Hz art Power: 750 W Drilling capacity: 3-16 mm Spindle taper: 3 max. capacity: 20
3 Creusen Professional Floor-standing Drill Presses 8000 KB ~ Voltage: 230V 1~ Hz art Power: 750 W Drilling capacity: 3-16 mm Spindle taper: 3 max. capacity: 20 KB ~ Voltage: 400V 3~ Hz art Power: 1100 W Speed: rpm Drilling capacity: 5-20 mm Spindle taper: 3 max. capacity: 28 KB ~ Voltage: 400V 3~ Hz art Power: 750 W Drilling capacity: 3-16 mm Spindle taper: 3 max. capacity: 20 Key to codes KB floor-standing drill press 820 series 8000 / series 8000 / 28
4 Creusen Professional Floor-standing/Bench Drill Presses 8000 Features wide range of spindle speeds low noise level aluminium pulleys ensure low-noise running transmission by 2 V-belts micro switch in belt guard for safety chuck guard spring depth scale indicator 5 7 no-volt release switch with emergency power cut off switch front chuck taper/spindle taper, right-rotating precise arbor belt tensioner smooth running motor cast iron feed handle with soft-grip thick-walled sturdy column working table with finished surface and T-grooves, M14, 360 rotatable working table also wet table 17 table working height adjustable by toothed rack 18 sturdy working table support 19 table crank 20 solid cast iron base with T-grooves M14 21 baseplate fixing openings
5 Creusen Professional Floor-standing/Bench Drill Presses 8000 Type TB 813 TB 816 TB 820 TB820 KB 820 KB 820 KB 832 1~ 1~ 1~ 3~ 1~ 3~ 3~ Drilling capacity (mm) Spindle taper / max capacity MK 2/13 MK 2/16 MK 3/20 MK 3/20 MK 3/20 MK 3/20 MK 3/28 Voltage ~ 1~ 1~ 3~ 1~ 3~ 3~ Frequency (Hz) Power (W) Number of speeds Speed (rpm) Spindle travel (mm) Swivel depth (mm) Wet table Height (mm) / / / / Height chuck taper to table (mm) Dimensions table (mm) 195 x x x x x x x 425 Dimensions bottom (mm) 330 x 200 x x 270 x x 285 x x 285 x x 285 x x 285 x x 400 x 90 Dimensions T-groove (mm) M14 M14 M14 M14 M14 M14 M14 Column diameter (mm) Switch with no-volt release and emergency power cut off Micro switch in belt guard Weight (kg) Equipped as standard with chuck taper Equipped as standard with spindle taper Option: drill press vice (mm) Option: clamping kit Article number Key to codes TB benchtop drill press KB floor-standing drill press 813 series 8000 / series 8000 / series 8000 / series 8000 / 28 inclusive
6 Creusen Professional Accessories and Parts 8000 TB 813 Motor 1~ art Switch with no-volt release and emergency power cut off art Switch front art V-belt front K-508 art rear K-19 art Spindle pulley 4 step art Idler pulley with shaft and bearings 4 step art Motor pulley 4 step art Fixing nut per 2 pieces art art Chuck taper B13-16 art Depth scale indicator art Coiled spring art Feed handle with tube art Table crank art Micro switch art Drill press vice 75 mm art
7 Creusen Professional Accessories and Parts 8000 TB 816 Motor 1~ art Switch with no-volt release and emergency power cut off art Switch front art V-belt front M-26 art rear M-24 art Spindle pulley 4 step art Idler pulley with shaft and bearings 4 step art Motor pulley 4 step art Belt tensioner art Fixing nut per 2 pieces art art Chuck taper B16 art Spindle taper MK2 art Depth scale indicator art Coiled spring art Feed handle with tube art Table crank art Micro switch art Wedge art Drill press vice 100 mm art
8 Creusen Professional Accessories and Parts 8000 TB 820 KB 820 Motor 1~ art Motor 3~ art Switch with no-volt release and emergency power cut off 1~ art Switch front art V-belt front A-29 art rear A-27 art Spindle pulley 5 step art Idler pulley with shaft and bearings 5 step art Motor pulley 4 step art Belt tensioner art Fixing nut per 2 pieces art art Chuck taper B16 art Spindle taper MK3 art Depth scale indicator art Coiled spring art Feed handle with tube art Table crank art Micro switch art Wedge art Drill press vice 100 mm art Clamping kit M14, 58 pieces art
9 Creusen Professional Accessories and Parts 8000 KB 832 Motor 3~ art Switch with no-volt release and emergency power cut off art Switch front art V-belt front A-750 art rear A-737 art Spindle pulley 4 step art Idler pulley with shaft and bearings 4 step art Motor pulley 4 step art Belt tensioner art Fixing nut per 2 pieces art art Chuck taper B22 art Spindle taper MK3 art Depth scale indicator art Coiled spring art Feed handle with tube art Table crank art Micro switch art Wedge art Drill press vice 150 mm art Clamping kit M14, 58 pieces art
Model No: PDM240F. Parts Information: Pillar Drill Floor 16-Speed 1635mm Height 230V
1 GSM610.S GRUB SCREW M6x10 (SINGLE) 2 PDM155B-1-02 COLLAR RACK 3 PDM260F-1-18 GEAR HELICAL 4 PDM170F-1-04 CRANK 6 PDM240F-1-06 TABLE 7 PDM240F-1-07 TABLE CLAMP 8 PDM170F-1-08 SCREW HEX M16X20-35 9 PDM240F-1-09
More informationModel No: PDM155B. Parts Information: Pillar Drill Bench 16-Speed 1050mm Height 230V
1 GSM610.S GRUB SCREW M6x10 (SINGLE) 2 PDM155B-1-02 COLLAR RACK 3 PDM260F-1-18 GEAR HELICAL 4 PDM170F-1-04 CRANK 6 PDM155B-1-06 TABLE 7 PDM240F-1-07 TABLE CLAMP 8 PDM170F-1-08 SCREW HEX M16X20-35 9 PDM155B-1-09
More informationModel No: PDM260F. Parts Information: Pillar Drill Floor 12-Speed 1710mm Height 230V
1 PDM260F-1-01 RACK COLLAR 2 GSM610.S GRUB SCREW M6x10 (SINGLE) 3 PDM260F-1-03 TABLE SUPPORT 4 PDM260F-1-04 CRANK 5 PDM260F-1-05 HANDLE CRANK 6 PDM260F-1-06 RACK 7 PDM260F-1-07 SCREW-HEX SOC SET M10X1.5-12
More informationHAFCO METALMASTER HM-48. Mill Drill - Geared & Tilting Head with DRO. (X) 540mm (Y) 185mm (Z) 410mm. Product Brochure
Product Brochure M126D HAFCO METALMASTER HM-48 Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Page 1 of 6 Specifications & Prices are subject to change without notification -
More informationWARNING: To reduce the risk of SAVE THIS MANUAL FOR FUTURE REFERENCE
' ($ 0$$/,&+)/ 0'(/',//( WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Part SP0 SAVE THIS MANUAL FOR FUTURE REFERENCE Printed
More informationPRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED
A L I F E T I M E O F R E L I A B I L I T Y PRODUCT GUIDE BROBO GROUP AND OWNED Certified System Quality ISO 91 TM All Brobo Machines & Parts include a 2 year Warranty S315D, S35D & S4B FERROUS METAL CUTTING
More informationElectric Power Tools Created :05 Revised :08 Page 1
2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationDRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm
DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationSTEM Learning Environment Mechanisms Assignment #4 Belt Drives Lesson #1 Pulleys and Belts
STEM Learning Environment Mechanisms Assignment #4 Belt Drives Lesson #1 Pulleys and Belts Name: Period: Directions: Fill in the areas of this document as instructed by your teacher. This Presentation
More informationBi-Metal Hole Saws Designed for the Professional
Bi-Metal Hole Saws Designed for the Professional New Improved Thicker, FLEX FREE backing plate for clean true holes and longer tool life Improved bi-metal construction for long life and durability Variable
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationMETAL MACHINERY SOLUTIONS SAW SERIES
METAL MACHINERY SOLUTIONS Horizontal Metal Cutting Band Saws W1318S Features Swiveling head (for miter cutting) Built-in feed table (all models) Miter cutting up to 60 ; for WS-1318FA and WS-1824FA up
More informationSECTION 9: PARTS. Headstock -43- Model G0761 (Mfd. Since 10/13) A
SECTION 9: PARTS Headstock 2 21 2 20 112 21 3 57 6 23 59 29 5 97 86 87 85 10 113 2 109 110 111 108 119 98 122 73 29 120 58 121 52 113 11 70 99 115 116 117 118 112 106 105 107 0 65 66 39 101 16 15 36 3
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationMODEL A-I-SPECIFICATIONS
ARTER Model A Rotary Surface Grinders are built in a light and heavy series. General Construction- The general design of both models is the same but the major units of the A-3 machines are of greater proportions.
More informationBelt-and Disc Sanders ST-DS 300 M
Belt-and Disc Sanders ST-DS 300 M Sanders Powerfull Motors Self-adhesive abrasive discs Tiltable cast iron tables ST-DS 300 M ST-DS 300 M Article-no. 66.890.89002.11 230 V 750 W 735 W 1420 RPM Belt size
More informationHMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant
0925202 HMD925 20v Power Feed with Coolant 0925302 HMD925 20v Type I plug, Power Feed with Coolant b a 5 HOOKS TO COOLANT INDUCER 8 7 9 29 3 0b 0a 0 36 23 8 7 3 2b 2a 2 a 7 Part / Serial Number Label 33
More information.com More than a machine. Power your life
Mechanical Clamp, Precise working Solid Radial Drilling Machines ideal for Versatile use in the Single Part and Series Production This kind of MM-R40V is the Mechanical Clamp 40mm Solid Radial Drilling
More informationKST 16 KST 16V KST 25 KSS 25V KSS
F KST 16V shown KSS 32 shown 186 Industrial Drill Presses KST KSS Rigid table (KST) and column drill presses (KSS) with large work tables Specifications KST 16 KST 16V KST 25 KSS 25V KSS 32 drilling capacity
More informationUniversal Sewing Supply
"Genuine" Parts For Eastman Straight Knives 4C1-99 4C1-150 SEE REPLACEMENT BELTS Model 627X BRUTE SEE SHARPENER HOUSING (FRONT VIEW) SEE SHARPENER HOUSING (REAR VIEW) 4C1-179 SEE KNIVES SEE LOWER GEAR
More informationTHE NEXT GENERATION OF PERFORMANCE
Best Value Guaranteed THE NEXT GENERATION OF PERFORMANCE 1 HP Continuous-Duty Dust Collector (M I -11100) 1 HP, 110 V, 1 PH, 7 A 4 (102 mm) 750 CFM 10 (254 mm) 75 dba 15 (381 mm) Bag Capacity: 20 gal.
More informationWOODWORKING & METALWORKING MACHINERY 2018 SPRING CATALOG
www.general.ca WOODWORKING & METALWORKING MACHINERY 2018 SPRING CATALOG 4.19.17 #10-005/10-005CF/10-005SCF M1 Dust collector - 1 HP General International General / General International product #10 005A
More informationSANDERS AND ABRASIVES
22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt
More information60-72 Chevrolet C10 Power Rack & Pinion Kit Instructions # , , &
60-72 Chevrolet C10 Power Rack & Pinion Kit Instructions # 8011740-01, 8011900-01, & 8011920-01 Unisteer offers a limited warranty against all manufacturer defects of their kits and supplied parts. Unisteer
More informationSELF-FEED DRILL UNITS MK III BROOMATIC SALES/ENGINEERING FEATURES
SELF-FEED DRILL UNITS MK III BROOMATIC SALES/ENGINEERING FEATURES The Building Blocks of Low Cost Drilling and Tapping Automation Table of Contents PAGE 1 FIG. 1 PNEUMATIC MK III WITH STANDARD 3/8 CAPACITY
More informationQuestion 8 Engineering Higher Level
Rack and Pinion Rotary motion to linear motion As pinion rotates, gear teeth mesh with those on rack Applications: Lowering table on pillar drill ; Steering in Car Worm and Worm wheel Transmits power through
More informationG10SR3(H6) 100mm Angle Grinder
CORDLESS PNEUMATIC DRILLING ROTARY & Model Wheel Diameter Input Power QUICK REFERENCE GUIDE FOR GRINDERS Spindle Thread Anti Vibe Handle UVP Switch Type Trigger Lock G10SN 100mm 840W 10000 (min-1) M10
More informationR D. Brackets Type Material Shaft D E F K R S T U X set mm mm mm mm mm mm mm mm mm mm Article N
Mounting Brackets for Interroll rum Motors 80s 113s rum Motor Bracket: ROHS chrome passivated mild steel or stainless steel R E K X T S rum Motor Brackets Brackets Type Material Shaft E K R S T X set mm
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationSADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES:
SADDLE TYPE MANUAL FEATURES: Meehanite cast iron of base, column, saddle, and table provides greater rigidity and highest possible grinding load capacity Ball bearing slideways resist damage due to impact
More informationCreusen Industrial Double Grinders 9000
The double grinding machines (DS) are fitted with grinding wheels with diameters of 200 mm, 250 mm and 300 mm respectively. They are characterised by their high, progressive power ratings which are more
More informationSECTION 9: PARTS Head Breakdown
G3102/G3103 Vertical Mill -45-1 1-1 2 2-1 3 3-1 4 5 6 7 8 9 9-1 10 10-1 11 12 13 14 15 16 17 18 19 20 20-1 21 22 22-1 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 42 43 44 45 46 47 48 49 50 51
More information8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE. Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B
7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationSCAN TO VIEW WEBSITE
SCAN TO VIEW WEBSITE 7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More information12" and 14" SAWS - 5 HP
12" and 14" SAWS - 5 HP MODEL K14SS These heavy-duty saws handle 2-1/2" solid round stock, 3" pipe with speed and efficiency. Extra-heavy Cast iron base, trunnion and arm. Sealed ball bearings, 1" wheel
More information05060 Coolant Bottle Assembly
Coolant Bottle Assembly 05060 Coolant Bottle Assembly 0506 Round Bottle 05059 Coolant Botttle Bracket 05065 Ball Valve 05067 Brass Barb Fitting (bottem of the bottle) 030 Vinyl Tube 07080 Brass Fitting
More informationWORKSHOP EQUIPMENT MADE FOR THE TRADE $65 $329 $599 $49 $39 GREAT PRICE! GREAT PRICE! RED LABEL RLS10BR MADE FOR THE RLB44RT
WORKSHOP EQUIPMENT GARAGE JACKS BOTTLE JACKS 4 blue bins and 12 red bins for easy identification. Sturdy three-tier steel rack with magnetic tool storage rail. Stackable bins made of moulded polypropylene.
More informationYear of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number X mm / Y mm / Z mm C - +/- 220 / B - +/- 110
EiMa GAMMA T LINEAR 5 axes portal machining center In excellent conditions Manufacturer Model EiMa GAMMA T LINEAR Year of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number 11615 Travels X 3.700
More informationhole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
More information7" CUT-OFF SAW - 1 HP 10" SAWS - 3 HP 8" CUT-OFF SAW - 3 HP 10" WET SAW BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE
7" CUT-OFF SAW - 1 HP 8" CUT-OFF SAW - 3 HP 10" SAWS - 3 HP BIG JOB CAPACITY 1-1/2" SOLIDS, 2-1/2" PIPE Cast iron BASE PROVIDES RIGID ALIGNMENT MODEL K10B MODEL K7B Handles 1" solid round, 2" pipe. Adjustable
More informationSENSITIV T-TA. Boring and facing heads with manual and automatic feed
SENSITIV T-T Boring and facing heads with manual and automatic feed 8 SENSITIV T-T General features The line of T-T boring and facing heads is provided with radial feed movement of the radial slide while
More informationRBM Manual, asymmetric 3-roller plate rolling machines
RBM Manual, asymmetric 3-roller plate rolling machines XXHeavy-duty and rugged cast iron design XXAsymmetric 3-roller system for convenient pre-bending XXTop roller swivels out XXRoller driven via crank
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationM E T A L W O R K I N G
M E TA LW O R K I N G 2009/2010 JET: 50 years of experience 50 years of high-quality machines 1958 The foundation of JET The flight with the first Boeing jet aeroplane from Seattle (USA) to Japan with
More informationSelection guide for drills
CAT_BOSCH_2011-02_EN_bosch_production-tools_catalogus_Pneumatic-Tools-for-Industry_Boormachines pagina 1 van 9 6 Drills and rotary hammer Air Tools for Industry Selection guide for drills Choosing a drill
More informationV ~ 50 Hz / 250 W 220 mm 1.2 mm / 600 cm Twin line cutting Plastics. '!0A68CF-gbggjj! +/ pc. '!0A68CF-fjibhj!
WELL DONE. LAWN TRIMMERS LOW WEIGHT EASY HANDLING ELECTRIC LAWN TRIMMERS Single / twin line cutting Second handle Telescopic long handle Motor head rotateable Motor head can be tilted Flower guard Fully
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationMain Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
More informationEquipment available due to closure
Epec - Fabrication and Engineering Equipment available due to closure (Ends: 2017-02-15 14:00:00.0) Epec - Fabrication and Engineering Equipment available due to closure Lot 1 Renault Master CC LL 35 Dci
More information37A- S/N 350,000 Up. Turbine Drive Water-Reels. Engine Drive Slurry-Reels T37A E37A. Parts Manual. Serial No. 350, ,999
37A- S/N 350,000 Up Turbine Drive Water-Reels Engine Drive Slurry-Reels T37A E37A Parts Manual Serial No. 350,000-359,999 700 S. Schrader Ave. Havana, Illinois 62644 Phone: 309-543-4425 Fax: 309-543-4945
More informationVarious duties efficiently solved EMCOMAT E-300 E-360 E-400. [ means:
[ E[M]CONOMY] means: Various duties efficiently solved EMCOMAT E-300 E-360 E-400 Cycle-controlled lathes with high-powered cutting performance and maximum precision EMCOMAT E-300 [Headstock] - Siemens
More informationClausing Precision Manual Surface Grinders
Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationSERVICE, TROUBLESHOOTING, & REPAIR
SERVICE, TROUBLESHOOTING, & REPAIR ARDISAM MODEL 5020D HANDLEBAR ASSEMBLY 101A THROTTLE CONTROL, (Includes #102) 1 102 KNOB-Throttle Control 1 103 SCREW-Rd Hd, #10-32 x 1/2" 2 104 LOCK WASHER-Spring, #10
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationEngine, disassembly and
Page 1 of 13 13-1 Engine, disassembly and assembly Ribbed belt, removing and installing Removing - Remove noise insulation -arrows-. - Remove bumper Repair Manual, Body Exterior, Repair Group 63 - Move
More informationMachining Centre. CNC Lathes. Machining Centre, CNC Mills and Lathes, Turret Mills, Drills, Saws & Miscellaneous
Machining Centre, CNC Mills and Lathes, Turret Mills, Drills, Saws & Miscellaneous Machining Centre End of Line Gate Eclipse VMC-610 Vertical Machining Centre 3 Axis Anilam 6000M control Year of Manufacture:
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationVERTICAL KNEE MILLS. MACHINERY & TOOLS CO South Ave. *Toledo, OH / *fax 419/
VERTICAL KNEE MILLS MACHINERY & TOOLS CO. 4545 South Ave. *Toledo, OH 43615 419/537-1717 *fax 419/537-1719 Email:sales@willismachinery.com www.willismachinery.com WM3VS AND 1050 MILLING MACHINES 3HP spindle
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationIndex SENSITIV T-TA SENSITIV T-TA. GENERAL FEATURES p COMPONENTS AND ASSEMBLY p SUPPLY p ARBORS p ACCESSORIES p.
Index SENSITIV T-T Boring and facing heads with manual and automatic feed SENSITIV T-T Boring and facing heads with manual and automatic feed GENERL ETURES p. 120 COMPONENTS N SSEMBLY p. 121 SUPPLY p.
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationFiner stock a range of quality V-Belt Pulleys. Constructed from cast iron, each pulley is Taper Locked to accommodate a range of shaft sizes.
V-Belt Pulley Finer stock a range of quality V-Belt Pulleys. Constructed from cast iron, each pulley is Taper Locked to accommodate a range of shaft sizes. V-BELT PULLEY Finer pulleys under go stringent
More informationSLUGGER CUTTERS Airforce 35. Airforce 45
Airforce 35 A compact pneumatic drill ideally suited to space restricted and hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry. Combining a
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationMitre Band Saw. Installation and Operating Instructions Note: Not all saw parts are shown in this booklet. Replaceable Aluminum Saw Table
P ARTS C ATALOG 2G PARTS CATALOG Drive Wheel End Pulley Box Speed Reducer M FG. COMPANY, INC. Mitre Band Saw Installation and Operating Instructions Note: Not all saw parts are shown in this booklet Motor
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationmax. 1, Ø Plate Kerf Bore Z Hook Ground
11 Multi-rip Saw Blade With Raker 0 0 Ø Plate Kerf Bore Z Z Hook Ground Excellent blade with special rakers for ripping cuts in solid wood, dry or wet. The carbide rakers protect the saw body to guarantee
More informationOperator's Manual VERSA Compact Tiller and Cultivator. ILLUSTRATED PARTS BREAKDOWN Handle Bar Assembly
ILLUSTRATED PARTS BREAKDOWN Handle Bar Assembly 4 3 2 7 5 6 7 8 6 4 2 3 0 9 7 8 4, 5 9 33 2 20 8 8 30,32 30,3 30 34 35 28 29 22 23 27 24 23 7 25 8 8 8 26-866-373-9665 3833 GRIP IN KNOB TEXTURED 2 2 23548
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationADVANCED. DIGIPREP Programmable Fully Automatic Metallography Grinder & Polisher
DIGIPREP 251 ADVANCED DIGIPREP preparation systems are designed for fully automated materialographic sample preparation for consistent and reproducible specimen quality. DIGIPREP s variable speed base
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationCLEATED INCLINE CONVEYOR OPERATION MANUAL
CLEATED INCLINE CONVEYOR OPERATION MANUAL SERIAL NO. DATE OF MANUFACTURE EQUIPMENT DESCRIPTION CLEATED INCLINE CONVEYOR The Cleated Incline Conveyor is a portable belted feed device. It is designed to
More informationWhat is a Mechanism?
Mechanisms What is a Mechanism? A mechanism is the part of a machine which contains two or more pieces arranged so that the motion of one compels the motion of the others. Generally used to: Change the
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
More informationFLEXIBLE. EASY-TO-USE. DURABLE. BI-METAL HOLE SAWS
FLEXIBLE. EASY-TO-USE. DURABLE. BI-METAL HOLE SAWS DESIGNED WITH TIME SAVINGS AND LONGEVITY IN MIND. THE UNIVERSAL PRODUCT FOR CUTTING HOLES IN WOOD AND METAL. BI-METAL HOLE SAWS When it comes to purchasing
More informationPony V Page 1 of 24 Battery Mounting Bracket
5151 Pony V Page 1 of 24 Battery Mounting Bracket 5151 Pony V Page 2 of 24 Battery Mounting Bracket 2 9296 2 CABLE- battery (replaces #9223) 4 9224 1 CLIP- vent tube shield (small) 6 9826 2 NUT- hex, 5/16"-24
More informationAMERICAN TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508
AMERICAN 255-76TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508 MODEL 60 REELS 1,000 Lbs. Capacity MODEL 60 MODEL 60-10 M- Motorized 60-10 NM- Drag Brake WIDTHS- 18" and 24" EXP. RANGE- 14" to 21" MAX. COl
More informationINSTRUCTION MANUAL. Series PROCUNIER SAFETY CHUCK CO. (Serial Nos. B4870 and higher. (Serial Nos. B9230 and higher
PROCUNIER SAFETY CHUCK CO. 304 Winston Creek Parkway Lakeland, Florida 33810-2866 Telephone 863-688-0071 FAX: 863-682-6233 Series 29000 (Serial Nos. B4870 and higher (Serial Nos. B9230 and higher INSTRUCTION
More informationDriver Driven. InputSpeed. Gears
Gears Gears are toothed wheels designed to transmit rotary motion and power from one part of a mechanism to another. They are fitted to shafts with special devices called keys (or splines) that ensure
More informationCARD RECORDER MECHANISMS
ITR Engineering Data Sheet 201 September 1927 CARD RECORDER MECHANISMS Card time recorders are used for registering on a card the time that employees enter and leave the factory. The card and the recorder
More informationMAGNETIC-STAND DRILLING MACHINES. profiline
MAGNETIC-STAND DRILLING MACHINES profiline Comparison of technical data RS4 - RS40e - The New RS GENERATION! RS20 / RSM20 Technical data RS4 RS5e RS10 RS20 RSM20 Mag. clamping force: 10.000 N 10.000 N
More informationClausing 20" (508mm) Variable Speed Drills
Clausing 20" (508mm) Variable Speed Drills Clausing Drills are equipped with a Spindle uard that locks in an upright position, away from spindle nose, for easy tool changes. Style loor Drill 22 x 19.5
More informationMILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models
Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description DP4010, DP4011 2-Speed Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Models DP4010 and DP4011 have been developed as 13mm (1/2") Drill for
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More informationCOMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationSECTION C Engine 5.4L (4V)
303-01C-i Engine 5.4L (4V) 303-01C-i SECTION 303-01C Engine 5.4L (4V) CONTENTS PAGE SPECIFICATIONS... 303-01C-2 303-01C-2 Engine 5.4L (4V) 303-01C-2 SPECIFICATIONS Material Motorcraft Metal Surface Prep
More informationD27300 Table PLANER THICKNESSER 2
D27300 Table PLANER THICKNESSER 2 D27300 Motor PLANER THICKNESSER 2 D27300 Rise & fall PLANER THICKNESSER 2 D27300 Table support PLANER THICKNESSER 2 1 860084-07 6 SCREW 3.2 x 32 No 2 868852-01 1 COVER
More informationTrick-Tools 75 Truman Road Pella, IA Phone:1-877-VAN-SANT
Distributed by: Trick-Tools 75 Truman Road Pella, IA 50219 Phone:1-877-VAN-SANT E-mail: sales@trick-tools.com Here at Trick Tools we believe that our customers deserve the best value in their tool and
More information