AMERICAN TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508
|
|
- Warren Williamson
- 5 years ago
- Views:
Transcription
1 AMERICAN TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508
2 MODEL 60 REELS 1,000 Lbs. Capacity MODEL 60 MODEL M- Motorized NM- Drag Brake WIDTHS- 18" and 24" EXP. RANGE- 14" to 21" MAX. COl L DIA. -54" MODEL N.M.- Mechanical Brake MODEL M-Y.. H.P Feet per min. 2,500 Lbs. Ca~ MODEL M- Motorized N M- Drag Brake WIDTH- 18"- 24"- 30" EXPANSION RANGE- 14" to 21" MAX. COl L DIA. - 54" MODEL N.M.----,- Mechanical Brake MODEL M- 1 H.P Feet per min. 4,000 Lbs. Capacity MODEL M- Motorized MODEL N.M.- Drag Brake WIDTH- 24"- 30"- 36" EXPANSION RANGE- 15" to 21" MAX. COl L. DIA.- 54" MODEL N.M. -Mechanical Brake MODEL M- 2 H.P Feet per min. Coil handling is smoothly and effectively accomplished by the spindle supporting the inside diameter of the coil to completely eliminate any contact with the surface or edges of stock as it is uncoiled. American Reels are designed for two types of operation - either "Pull-off" where the next machine in the line pulls the stock from the reel, or "Driven Spindle" where powered rotation of the spindle causes stock to feed into a slack loop between the reel and the next machine in the line. All American Reels offer as standard a variable speed drive and an adjustable loop control. With adjustable speed and an adjustable loop control, the American Reel wi II run smoothly and effortlessly. All American Reels are of all steel weldment construction. They are designed to meet the specified requirements with the assurance of long life and trouble free operation. All Model 60 Reels have heavy duty Timken bearing supported arbors. American also offers coil restrictors "keepers" as standard equipment. Optional equipment on Non-Powered Reels are electric brakes or air regulated brakes. Optio,nal equipment on powered reels that can be installed are Eddy Current Drives, D.C. Drives, Electric Clutches & Brakes, and Air Clutches & Brakes. 3
3 REELS MODEL ,000 Lbs. Capacity MODEL 1,000-6,000 THRU 50,000 LB. CAP. MODEL 1, N.M.- Drag Brake MODEL 1, M- Motorized WIDTHS - 24"- 36"- 48" EXP. RANGE 16" to 21" +Hydraulic expansion avail. MAX. COIL DIA.- 60" MODEL 1, N.M.- Mechanical brake MODEL 1, M- 2H.P Feet per min., / 10,000 Lbs. Capacity 4 MODEL 1, N.M. - Drag Brake MODEL 1, M- Motorized (Air Clutch & Brake Std.) WIDTHS - 36" - 48" - 60" MIN. EXP RANGE- 15Y/' to 20Y/' or to Suit- Hyp. Exp. Extra. MAX. COIL DIA. 64" MODEL 1, M DRIVE- 5 H.P. 33 to 100 Feet per min. Air Clutch & Brake 20,000 Lbs. Capacity MODEL 1, N.M.- Drag Brake MODEL 1, M- Motorized (Air Clutch & Brake Std.) WIDTHS - 36" - 48" - 60" - 72" MIN. EXP. RANGE- 18Y2" to 23" or to Suit. (Hyd. Exp. Standard) MAX. COIL DIA.- 72" MODEL 1, M DRIVE - 7'h H.P. 33 to 100 Feet per min. Air Clutch & Brake 30,000, 40,000,50,000 Lbs. Reel Built to Customers Specifications American Reels Series 1000 are available powered or non powered. Non powered reels have a spring loaded mechanical brake which can be adjusted. All powered reels have variable speed. By utilizing the 3 to 1 ratio drives, the arbor of the reel as well as the motor drive will run smooth. The loop control is of an adjustable type with two rotory cams which actuate two limit switches, one for starting and one for stopping. All reels contain the finest of materials with the utmost in simplicity. All rotating parts are mounted on heavy duty tapered roller and ball bearings for maximum efficiency with a minimum cost of operation. An important feature of all American 1000 series reels is the use of wedges for expanding the arbor. Wedge type expansion insures smooth and easy loading whether the operator expands the mandrel mechanically or hydraulically. All American Reels of capacities of 30,000 pounds and up are specifically designed to meet the need of the customer. American 6,000, 10,000 and 20,000 lbs. reels are always available with very little delay in delivery. Such items as drives, arbor assemblies, cabinets are always in stock. OPTIONS AVAILABLE Electric Brakes Electric Clutches & Brakes Air Brakes. Air Clutches & Brakes. (Std. on 10,000 reels and up)
4 MODEL 70 DOUBLE END REELS MODEL 70 DOUBLE END REELS AVAILABLE SIZES 1,000-2,500-4,000 WIDTHS- 18"- 24" MAX. COIL DIA.- 60" EXP. RANGE- 14" to 21" INDEXING FOOT OPERATED & 360 POWERED REELS INCLUDE- Variable speed (3 to 1) Loop control and Reversing OPTIONAL EQUIPMENT Air or Electric Brakes Air or Electric Clutches & Brakes American 6,000 and 10,000 Lbs. Capacity Double End reels include all the same features as the 1000 series reels. By utilizing the Double End Reel with larger capacities, cost savings double. When coil changing interferes with production, production is minimized. AVAILABLE SIZES- 6,000 & 10,000 Lb. Capacity WIDTHS - 24" - 30" - 36" - 48" MAX. COl L DIA.- 60" EXP. RANGE- 15% to 20% or to suit INDEXING FOOT OPERATED- 180 & 360 POWERED REELS INCLUDE- Variable Speed (3 to 1 ratio) 10,000 Reel has Air Clutch & Brake as Stand. OPTIONAL EQUIPMENT Air or Electnc Brakes Air or Electric Clutches & Brakes Hydrau I ic expansion 5
5 40,000 REEL & CAR SHOWN COl L REEL & CAR COMBINATION Available 6,000 thru 50,000 lb. cap. Series 1,000 Reel mounted on common base with coil car. Coil car has 12" vertical lift and unlimited travel. Coil car is operated hydraulically. 20,000 REEL & UP ENDER SHOWN COIL REEL & UPENDER UNIT Available 6,000 thru 20,000 Lb. Series 1,000 Reel mounted on common base with upender. Upender has 12" vertical lift, unlimited travel & upending of 90. Upender is operated hydraulically. 6
6 TRAVELLING REELS 20,000 REEL SHOWN TRAVELLING REELS Available 6,000 thru 50,000 Lb. Capacity Reel traverse unlimited. Coil loader has 12" vertical lift. 10,000 REEL & UPENDER Traversing reels with station loading upenders are available in sizes 6,000 thru 20,000 lbs. Upender has 12" vertical lift & 90 upending. Reel travels in for loading. 7
7 SELF CONTAINED COIL CARS 6,000 10,000 20,000, 30,000, 40,000, 50,000 Cap. All functions controlled hydraulically. Unlimited travel with self contained drive system. All cars have 12" of vertical lift. All wheels are mounted with Timken Roller Bearings. SELF CONTAINED UPENDERS 6,000, 10,000, 20,000 lb cap. All Hydraulics and electrics self contained. Widths available Upending time approx. 30 sec. 90 upending is done by heavy duty hydraulic cylinders. Design or upender is most accomodating for lift truck portability. All steel weldment insures long life and easy maintenence. 8
8 TURNSTILES All Turnstiles are of all steel construction and specifically engineered to meet your requirements. Turnstiles are available with 1 arm, 2 arms or 3 arms. Other options are powered push-off and power rotation. Available sizes are 6,000, 10,000, 20,000, 30,000, 40,000, 50,000 lbs capacity on each arm. REWINDERS Rewinders available 1,000 thru 50,000 lb. capacity. Various drives that can be fitted: A.C. Motor Eddy Current D.C. Current Hydraulic All recoilers are built specifically to customer requirements. Optional Equipment Push-off Traversing Base Overarm Separator Hydraulic Expansion 9
9 MODEL 3-11 STRAIGHTENER The function of an American Straightener is to remove the curvature from coil stock after it is uncoiled from the payoff reel. After the material has been straightened, the rolls move the material into loop condition for feeding purposes. Specification: For Model 3-11 Straightener Roll Dia. 3" Hardened and Ground Top Rolls adjustable for tilting e Quantity 11 Rolls- 7 Straightening and 2 Sets of Pinch Rolls Variable speed drive - 3 to 1 eaii Rolls powered Loop Control - Reversing Inching e Three top Rolls can be ra ised and lowered simultaneously Entry and Exit Roller Guides Volts W/ 110 Volt control 575 Volts electric available WIDTH H. P. M IN. MAT. THICKNESS MAX. WIDTH % ' OPTIONAL EQUIPMENT: 10 Air or Electric clutch and brakes Pneumatic operated Pinch Rolls e Reeves type drives e O. C. Controlled drives Eddy current drives Hydraulic drives
10 MODEL 4-11 STRAIGHTENER The operation of the Model 4-11 Straightener is quite the same as the Model The Model 4-11 Straightener is designed to handle heavier material. Specifications: Roll Dia. 4" Hardened and Ground Top Rolls adjustable for tilting Quantity 11 Rolls- 7 Straightening and 2 Sets of Pinch Rolls Variable speed drive- 3 to 1 All Rolls powered Loop Control- Reversing Inching Three top Rolls can be raised and lowered simultaneously Entry and Exit Roller Guides Volts W/ 11 0 Volt control 575 Volts electric available WIDTH H. P. MIN. MAT. THICKNESS MAX. WIDTH 'h 'h OPTIONAL EQUIPMENT: Air or Electric clutch and brake Pneumatic operated Pinch Rolls Reeves type drive D. C. Controlled drives Eddy current drives Hydraul ic drives 11
11 AIR FEEDERS MODEL SHOWN 48" WIDE x 36" STROKE WITH PULL THRU STRAIGHTENER STD. EQUIPMENT ON ALL AIR FEEDS 1. Hand crank operated adjustable stroke. 2. Pilot pin control 3. Adjustable legs- 9" 4. Hand crank operated side guides way speed control of stroke 6. Individual cushion adjustment 7. Filter- Regulator- Lubricator 8. Read out - Scale OPTIONAL EQUIPMENT 1. Multi-Stroke 2. Stock Oiler DOUBLE AIR GRIPPERS American Air Feeds are of all steel construction. All Air Feeds are designed to take the every day abuse that usually occurs with press room equipment. American Feeds offer a wide range of different feeds. All Feeds have 5" cylinder with pull thru straightener. All Feeds without straightener will have 4" cylinder. Widths Available 24"-30"-36" 48"-60"-72" Strokes per min. 24" stroke-36 36" stroke-26 Strokes Available 24"-36" See page 10 for maximum material specifications for Pull Thru Straighteners. 12
12 SINGLE GRIPPER AIR FEEDS FEEDS AVAILABLE ASG ASG ASG ASG Cap. 12x x x x Cyl. Bore 4" 4" 4" 4" Width Stroke SPM Pilot Pin Release Adjustable Stroke All Pneumatic Valves are Manifold Mounted 110 Volt Plug in Controls Standard 5 Roll Straightener has 3" dia. hardened and ground rolls and one set of pinch rolls. Straightening rolls are individually adjustable. Complete feed consists of steel weldments and machined steel parts. American Steel Line Company's guarantee on any air feed is one full year. ALL SINGLE GRIP FEEDS SHOULD BE MOUNTED ON A HEAVY DUTY BASE. OPTIONAL- heavy duty base-with air tank multi-stroke. %filter regulater, lubricator 13
13 COMPLETE INSTALLATIONS Line shown includes 6,000 double end reel - Model 3-11 Straightener and Air Feed. Line Shown includes : 10,000 LB. CAP. Coil Reel & 48" Wide Air-Feed. 14
14 COMPLETE INSTALLATIONS Line is shown with Air Feed for determining length. Complete line has a capacity to cut strips up to 200" long. Reel & Straightener combination. This design eliminates 50% of floor space. Model shown 30,000 lb. cap. reel & Model4-11 STR. 60" w ide. 15
SpaceMaster Compact Coil Lines
Coe Press Equipment Corporation SpaceMaster Compact Coil Lines Coe Press Equipment Corporation The Company That Feeds an Industry Coe Press Equipment Corporation SpaceMaster Series 1 Compact Coil Lines
More informationLow Cost Series! FS STOCK STRAIGHTENER. Max. Material Max. Material Number of Roll Model Width Thickness Rolls Diameter Weight
Stock Straighteners: Pull Thru Low Cost Series! FS-1 Model FS Stock Straighteners Durant "FS" Stock Straighteners are used for straightening flat wire and flat stock in a very simple, precise manner. These
More informationCoil Handling & Press Feeding Equipment
Coil Handling & Press Feeding Equipment Yesterday s integrity. Tomorrow s technology. Corporate Overview Since 1966, CHS Automation has been aiding the metal forming industry by providing a productive
More information20,000 lbs. x 48" wide x.048" Thick "Panther" Cut-To-Length Line
20,000 lbs. x 48" wide x.048" Thick "Panther" Cut-To-Length Line GENERAL SPECIFICATIONS: Coil weight: 20,000 lbs. maximum Coil width: 24" - 48" Coil O.D.: 60" maximum Material type: Electro-Galvanized
More information1-800-D-DURANT or for your nearest metal stamping distributor.
2011 Durant Tool Company Manufacturers of Coil Handling Equipment Good Morning! Here is your special copy of the completely new, full color DURANT TOOL Catalog, packed with 56 pages of the latest products
More information1-800-D-DURANT OR FOR YOUR NEAREST METAL STAMPING DISTRIBUTOR.
Durant Tool Company Manufacturers of Coil Handling Equipment Good Morning! Here is your special copy of the completely new, full color DURANT TOOL Catalog, packed with 68 pages of the latest products and
More informationJune COIL Handling & Processing Equipment
June 2018 COIL Handling & Processing Equipment MECON INDUSTRIES LTD Mecon is a leading manufacturer of coil processing and handling equipment, brake press tooling and special purpose machines. From our
More informationCABINET REEL OPERATING INSTRUCTIONS
CABINET REEL OPERATING INSTRUCTIONS MODELS 15, 25, 40 & 60 SERIES RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. ROCKFORD, IL 61109-2925 Phone: (815) 397-2578 Fax: (815) 398-3887 Web Site: www.rapidair.com
More informationPUBLIC AUCTION th Street Hammond, Indiana Thursday, December 15, Let Our Experience Be Your #1 Asset TM DATE TIME LOCATION
PUBLIC AUCTION Surplus to the Ongoing Needs of a Major Metal Framing Company 1994 1987 3 available StriliCH/taylOR WINFielD 72 coil build-up/weld line STAMCO 72 injector head type slitting line 72 x 10,000
More informationFilm-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.
Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema
More informationPRESSES FOR INDUSTRY
PRESSES FOR INDUSTRY 20501 Hoover Road Detroit, Michigan 48205 WE SPECIALIZE IN STAMPING AND FABRICATING AS WELL AS TOOL ROOM MACHINE TOOLS 30 SPM C OMPLETELY R EBUILT 0-30 VSPM 660 Ton DANLY S4-660-180-83
More informationCONTENTS WIRE TANGENT SERVO WIRE FEED STRAIGHTENER HEAVY DUTY TANGENT SERVO WIRE FEED MODULAR WIRE 6-7 STRAIGHTENER WIRE PNEUMATIC WIRE SHEAR
P/A INDUSTRIES P/A Industries offers technology driven solutions for all wire handing, straightening and feeding needs. Whether your need is retrofitting older equipment with new technology or integrating
More informationLate Model Brass Mill Fully Integrated
Late Model Brass Mill Fully Integrated for manufacturing of Coil Stock Rolling Mill Plant Casting Plant Available for purchase as a going concern *OWNER FINANCING AVAILABLE* Late Model Complete Copper
More informationINDEX. PAGE Adjustment mechanism for radial position of block on rotating
INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,
More informationALLENAIR ROTARY INDEX TABLES
SOLENOID PRESSURE PILOT BLEED PILOT BASIC TABLE ALLENAIR ROTARY INDEX are precision indexing mechanisms... unsurpassed in accuracy, performance and dollar value. We know of no other Tables of equal accuracy
More informationUtility Fork with Grapple
Utility Fork with Grapple Model Number MGV. Serial Number. Phone: 30-393-7080 4//03 Revised //3 MGV Features of Virnig Mfg. Inc. Utility Fork with Grapple include: bore x 8 3/8 stroke cylinder. 3/4 diameter
More informationHydra ulic po A single leftl' hydraulic - ' chuck and
"" These two. basically diflt will, each in its fjw1j ra with minimum operator The No. 7 is the larg~ ram type turret lathe b. any cabinet leg, is 5501 wall bed with deep Jxll walls, forms an e:rceedi.
More informationBale Grapple. Model Number BG. Serial Number. Phone: /1/08 Revised 1/1/13
Bale Grapple Model Number BG. Serial Number. Phone: 30-393-700 //0 Revised //3 BG Features of Virnig Mfg. Inc. Bale Grapple include: bore x 3/ stroke cylinders. Large jaw opening of 73. Replaceable bushings
More informationDXG 100 CNC Chucker with Gantry Robot
DXG 100 CNC Chucker with Gantry Robot jyoti. co.in DXG 100 CNC Chucker with Gantry Robot OVERVIEW DXG 100 is developed by considering industry requirement of small disc - type precision components in huge
More informationMobile 44 (0) Phone 44 (0) CHAPTER THREE Pipe Beveling Series
CHAPTER THREE Series MiniLathe power STaNDarD capacity* STD. LocKINg range* FeeD STroKe TorQUe MiniLathe Recommended for 2,2 kw 72 356,0 mm 72 348,0 mm 50 mm choice of three 3,0 hp 2,8 14,0 2,8 13,7 2
More informationPRODUCTION LINES INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS
PRODUCTION LINES INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS Feeding & Coil Handling Equipment Contents Complete Production Lines...2 Build Your Own Integrated System...2 Individual Products...3 Rapid-Air Feeds...
More informationManufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment
Manufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment Where superior duct work begins. The Vicon line of HVAC Rollforming and Sheet Metal Equipment is the industry proven solution for all
More informationInnovative Designs For Positive Parts Transfer
Innovative Designs For Positive Parts Transfer AUTO-SLIDE CATALOG CONTENTS Cylinder Powered Linear Slide (AFPRS ) 3 Cylinder Powered Bi-Directional Slide (AFPRBD) 6 V Style Pick & Place (AFPPV) 8 L Style
More informationCreusen Professional Floor-standing/Bench Drill Presses 8000
Creusen Professional Floor-standing/Bench Drill Presses 8000 A series of floor-standing and benchtop drill presses for the professional user featuring the qualitythat you can expect from Creusen. The models
More informationStainless Steel Reels for Heavy Industry
Hose & Reel P R O D U C T S Stainless Steel Reels for Heavy Industry Washdown Chemical Transfer Potable Water Food Processing Farmaceuticals & Cosmetics Fueling Fire Protection Dairy Operations Bottling
More informationPneumatic & hydraulic drive options available. Chucking system can be removed to allow the flange facer to be facemounted.
FF8200 FLANGE FACER A HEAVY - DUTY FLANGE FACER WITH FACING AND MILLING CAPABILITIES Rugged Machine Design Large, heavy duty construction-grade bearings provide powerful, rigid performance throughout the
More informationDECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING
DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING CONSULTANCY, DESIGN, PRODUCTION, AFTER-SALES SERVICE CONTENT 03 Consultancy, design, production, after-sales service 04 Strip decoiling,
More informationChief impulse - VHT PARTS MANUAL
Chief impulse - VHT 2005 Chief Automotive Technologies Parts Information To order replacement parts for the Chief impulse - VHT System, contact an authorized representative of Chief Automotive Technologies,
More informationSLITTING AND CUT TO LENGTH LINE Model: ZJX0.5-5X1600 Main technical Parameters: No. Name Unit Parameters 1 Control model Frequency conversion control
SLITTING AND CUT TO LENGTH LINE Model: ZJX0.5-5X1600 Main technical Parameters: No. Name Unit Parameters 1 Control model Frequency conversion control 2 Materials CRS/HRS(1-4mm)SS(1-3mm) Number of slitting,
More information32 Pass Rollforming Line for the Production of Lighting Trunking
FORMIT 1/5 Performance Line speed Max component length : 4 components / min : subject to punching. : 6 metres Coil - 2000kg x 150mm x 0.7mm Painted Mild Steel (P)CD2000.300 DOUBLE SIDED DECOILER With hydraulic
More informationDECOILER AND REWINDER
DECOILER AND REWINDER 02 DECOILER AND REWINDER COILER The history of SOPREM was starting in 1961 when the first simple decoiler has been manufactured. SOPREM coilers are offering a safe decoiling, feeding
More informationCWP/Schuler Coil Processing/Transfer System Solution
CWP/Schuler Coil Processing/Transfer System Solution Article Submitted by: Bruce Bean Senior Sales Engineer Formtek Maine Ph: 1-800-247-2645 Ext. 201 Fx: 207-426-8868 Mobile: 207-692-4022 bbean@formtekinc.com
More informationSurface Grinder ESG 618 E X18 Manually Operated. Features: Included as standard:
Surface Grinder ESG 618 E 1-500-100 Features: Robust cast iron construction Easy and quick to set up which saves time Precision built for accuracy Mass produced and economically priced Ball bearing ways
More informationADJUSTABLE AIR PRESS
ADJUSTABLE AIR PRESS MODELS 12-A, 28-A, 50-A INSTALLATION, OPERATING, and MAINTENANCE INSTRUCTIONS Black & Webster Assembly Equipment Division 545 Hupp Ave. P.O. Box 831 Jackson, Michigan 49204 Phone:
More informationreciprocating cam with half-cycle safety overload mechanism permits adjustable
Acceleration of flying shear. device reduces initial... 104, 105 Adjusting mechanism, three-axis... 123 Arcs with inaccessible centers, plotting circular... 447-449 Assembly machine, mechanism for orienting
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More information2 Cylinder Grapples. Model Number.
Cylinder Grapples SGV STG SRGV HSRGV SBG ISG TBG Model Number. Serial Number. Serial Number 0400-059 AND 0609, 0630, 0735, 0736, 0737, 0750, 075, 09, 00, 0, 0, 03, 09,09, 074, 075, 076, 077, 90 Manufacture
More informationSeries Gemco. Rotating Cam Limit Switches. Micro-Adjust Cams. Spec Tech Industrial 203 Vest Ave. Valley Park, MO Phone: 888 SPECTECH
Series 1980 Gemco Rotating Cam Limit Switches Micro-Adjust Cams Spec Tech Industrial 203 Vest Ave. Valley Park, MO 63088 Phone: 888 SPECTECH Email: sales@spectechind.com www.spectechind.com FEATURING PRECISION
More informationDART. Small Block - Technical Notes. Deck Height Bore Main Bearing Size (2.45) 400 (2.65) Weight...
DART Small Block - Technical Notes Deck Height... 9.025 9.325 Bore... 4.000 4.125 Main Bearing Size... 350 (2.45) 400 (2.65) Weight... 210 lbs Largest Recommended Bore..... 4.185 Largest Recommended Crank
More informationSkidPro. Hydraulic Snow Blade/Pusher Combo OWNERS/OPERATORS MANUAL. Model Number HSBP.
SkidPro Hydraulic Snow Blade/Pusher Combo OWNERS/OPERATORS MANUAL Model Number HSBP. Serial Number. Serial Numbers 36, 3600-3603 & 37000 and Greater Manufacture Date 0/0/ Current Phone: 77-37-6 06/0/5
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationState-of-the-Art Coil Slitting Facility
SEALED BID AUCTION State-of-the-Art Coil Slitting Facility Extremely Late Model Slitting Lines Banding Line Overhead Bridge Cranes Quality Inspection Railcar Mover Facilities Equipment Real Estate Available
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationSpecial Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
More informationRotary Indexing Table with Face Gear
FIBROTAKT Rotary Indexing Table with Face Gear Product No. 1.001.00.00.00.01000 1 7975 006 4 08/007 Contents FIBRO The latest technology with a tradition of service /3 FIBROTAKT at a glance 4 Technical
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationWhy Mag Tech Brakes & Clutches are Better n No electricity n No break-away torque n Constant torque independent of shaft (rotor) speed n No contacting
Permanent Magnet Hysteresis Brakes & Clutches n Non-electrical n No wearing parts n Precise, permanent tension control TRANSMITTING TORQUE THROUGH AIR AIR Why Mag Tech Brakes & Clutches are Better n No
More informationActuator Capabilities
Actuator Capabilities The Compact Difference... Compact Automation Products brand, is a market-leading manufacturer of space-efficient linear actuator solutions including, industry standard and custom
More informationDENISON HYDRAULICS Premier Series. open loop pump controls series P080. service information
DENISON HYDRAULICS Premier Series open loop pump controls series P080 service information Publ. S-AM0 Internet: http://www.denisonhydraulics.com E-mail: denison@ denisonhydraulics.com CONTENTS typical
More informationPortal modules.
Portal modules www.comoso.com www.comoso.com Portal modules PORTAL MODULES Series Size Page Portal modules PMP 114 PMP 16 118 PMP 25 124 EPM 130 EPM 37 138 EPM 48 146 The SCHUNK program offers linear technology
More informationSeries SS Solid Stainless Cylinders
Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O
More informationTYPICAL SPECIFICATION ECP Steel Pier PPB-300 Utility Bracket System
1.01 Typical Installation Scope TYPICAL SPECIFICATION ECP Steel Pier PPB-300 Utility Bracket System Section 1- General Furnish labor, equipment, tools and material to install the PPB-300 Steel Piers as
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationDozer Blade. Cylinder Bushing Installation. Hydraulic Installation. Model Number DZR. Serial Number. Phone: DZR
Cylinder Bushing Installation Dozer Blade All 3 cylinders use 4 bushings each. Hydraulic Installation Tilt Cylinder Left Side Angle Cylinder Model Number DZR. Serial Number. Right Side Angle Cylinder Phone:
More informationBulletin T Bulletin SG Bulletin T Bulletin SA MACHINERY
Bulletin T-10...54 Bulletin SG-1...55 Bulletin T-12...57 Bulletin SA-21...58 & A B e drawing V-00-0419 & G&P Machinery - GPSS Heavy Duty Stroke Sanders - MADE IN THE U.S.A. Model HP Belt Size Table
More informationClimax Valve Repair Machines
VM7000 VM6000 VM8000 Climax Valve Repair Machines descriptions specifications operational dimensions components CLIMAX Portable Machine Tools, Inc. 6/00 1 Model VM7000 Valve Boring Machine Now you can
More information200SERIES ID MOUNT PIPE BEVELING EQUIPMENT
200SERIES ID MOUNT PIPE BEVELING EQUIPMENT Tri Tool manufactures the finest portable beveling machines that deliver maximum precision, reliability and performance Model 214B 2 BEVELING WELD END PREPARATION
More informationTel/Fax: Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM.
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD, VARIABLE SPEED PULLEY 1250 O.S. - 1/2 Shaft P-1629 1250 N.S. - 5/8 Shaft P-1649 V-BELTS 35 Motor to printing head P-4904 33 Pump
More informationService Manual. D, DD Motor Grader
Allis Chalmers Service Manual D, DD Motor Grader Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF ALLIS CHALMERS OR IT S SUCCESSORS. ALLIS CHALMERS AND IT S SUCCESSORS
More informationDART Aluminum FORD 351 Small Block Technical Notes
DART Aluminum FORD 351 Small Block Technical Notes Deck Height 9.200 Cleveland 9.500 Windsor Bore 4.00 or 4.125 unfinished Main Bearing Size Cleveland 2.749 Weight. 9.200 91 lb / 9.500 93 lb Maximum bore
More informationContents. Overview Pinsetter Orientation...1-4
Contents Overview...1-3 Pinsetter Orientation...1-4 Pinsetter Description...1-5 Ball Pit...1-5 Ball Cushion...1-5 Transport Band...1-7 Ball Accelerator...1-8 Pin Elevator...1-10 Distributor...1-14 Setting
More informationGROUP 11 HYD. PUMPS & VALVES
GROUP 11 HYD. PUMPS & VALVES T944 EXTENDO PUMP INSTALLATION, FL-14490... 11-2 PUMP ASSEMBLY, LL-7500-11... 11-4 PUMP ASSEMBLY, LL-7500-11, (PUMP SECTION, LL-7501-15)... 11-6 PUMP ASSEMBLY, LL-7500-11,
More informationCable pulling technology
Cable pulling technology Fish tapes/pulling rods 556 Polyester 556 Perlon 556 Nylon 556 Steel 557 Flex-O-Twist speed flex leader 557 Fibreglass cable pulling rods 557 Cable pulling systems 55 With Polyester
More informationPage FHC350D Drive Motor 2/3 Hp (1.4/2.2kw) Angles (left & right) 45 Electric
www.clausing-industrial.com A Line of Affordable, Rugged Built, Ferrous and Non-Ferrous Cutting Production Circular Saws Manual Cutting Machines Pneumatic Vise Cutting Machines Semi-Automatic Cutting Machines
More informationBand-Master ATS Banding Tools and Operating Instructions
Band-Master ATS Banding Tools 601-100 and 601-101 Step 1 Prepare Cable Braid for termination process NOTE: banding must occur on an unfixtured cable assembly. Attaching a band to a firmly clamped cable
More informationMax. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) (
These valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycles machine tools. Switching from rapid traverse
More informationCNC Vertical Machining Centers
CNC Vertical Machining Centers The Best Valued VMC in the Market Today... Take a Minute and Compare Whatever the requirement there is a Storm VMC for Every Application Storm CNC Vertical Machining Centers
More informationIron Small Block - Technical Notes
DART Iron Small Block - Technical Notes Deck Height... 9.025" Bore... 4.00" or 4.125" unfinished Main Bearing Size... 350 (2.45") Weight... 175 lbs Largest Recommended Bore... 4.165" Camshaft Bearing Diameter...
More informationIn-Line Positive Feed Tools
In-Line Positive Feed Tools ADVANCED DRILLING EQUIPMENT SP-1300-1-EN-0806-.25M 1-1 Introduction In-Line Positive Feed Tools How Positive Feed Drills Operate Our in-line positive feed drills use two interconnected
More informationFlexible. Light. Productive. LEG Long-stroke Gripper
LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,
More informationP/A INDUSTRIES A BRIEF HISTORY
PRESSFEEDING P/A INDUSTRIES A BRIEF HISTORY FIFTY PLUS YEARS Pneumatic Applications Company was formed in 1953 as a New England manufacturer of press clutches, brakes, controls and press feeding equipment.
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears WWW.HACO.COM For Impressive Performances 1 Hydraulics Cutting angle/blade gap adjustment The hydraulic guillotine shears of the HSL range are driven by
More informationSG9MTS Cylinder Head Seat & Guide Machine
SG9MTS Cylinder Head Seat & Guide Machine The Speed of Live and the Accuracy of Fixed Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. SG9MTSMTS CYLINDER
More informationHigh Performance High Rigidity Vertical Machining Center
High Performance High Rigidity Vertical Machining Center NMV Series Vertical Machining Center is the latest developed machine for efficient production industries; widely adopted in automobile, aerospace,
More informationMINSTER. VX Series Presses VX SERIES. Group Company 40 & 80 TONS CAPACITY BULLETIN 187A
A Group Company MINSTER BULLETIN 187A VX SERIES 40 & 80 TONS CAPACITY TECHNOLOGICALLY ADVANCED TO PROVIDE GREATER FLEXIBILITY AND INCREASED PRODUCTION INTRO With more than thirty years of expertise in
More informationCoil winding unit RINGROL 300 / 400 / 560
Coil winding unit Winding up Unwinding Rewinding Measuring Kabelmat Wickeltechnik GmbH Steinbuckelweg 25 D-72293 Glatten Phone: ++49-7443-9670-0 Fax: ++49-7443-9670-39 Cables Wires Ropes Tubes Hoses RINGROL
More informationFlow Line Controls Positioner Specifications Series 55 3-15 psi Pneumatic Series 56 4-20 ma Electro-Pneumatic Series 55 Series 56 Flow Line Controls, Inc. P.O. Box 677 Schriever, LA 70395 Phone: 985-414-6003
More informationINSTRUCTION BOOKLET FOR PNEUMATIC STOCK CUTTER MODELS SCP-6 & SCP-12
INSTRUCTION BOOKLET FOR PNEUMATIC STOCK CUTTER MODELS SCP-6 & SCP-12 200 Circuit Drive North Kingstown, Rhode Island 02852 USA International Phone: 401-781-7800 Toll Free: 800-338-7268 Fax: 401-738-2586
More informationCarbon Fiber Air Shafts. Custom Carbon Fiber Tubes
Carbon Fiber Air Shafts Lightweight composite air shafts... with custom performance by design. NimCor offers an outstanding line of precision engineered carbon fiber shafts with unique performance features.
More informationHOISTS RATCHET LEVER HOISTS
Yale HOISTS RATCHET LEVER HOISTS Yale PE & RS Ratchet Lever Hoist / to ton capacities Link chain models Light and portable Weatherized load brake Requires less handle pull to lift full load Efficient Yale
More informationPerfmaster Air V3. Serial Number. Date
Perfmaster Air V3 12-2015 Serial Number Date TABLE OF CONTENTS SPECIFICATIONS.3 SAFETY PROCEDURES/CARE & MAINTENANCE..4 COMPONENT IDENTIFICATION 5 DELIVERY TRAY ASSEMBLY.6 PAPER STOP ASSEMBLIES..7 MACHINE
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. Description EM2650UH/ EM2650LH, EM2651UH/ EM2651LH Petrol Brushcutter W W PRODUCT P 1/ 14 H CONCEPT AND MAIN APPLICATIONS These four 25.4mL Petrol Brushcutters have been
More informationUltra-High Energy Absorption SC 25 to SC 650 Heavyweight Shock Absorbers. Featuring New SC 25, 75 & 190 Models Features...
Ultra-High Energy Absorption SC 5 to SC 650 Heavyweight Shock Absorbers Featuring New SC 5, 75 & 190 Models Features. Piston Tube Design for Long Cycle Life Stainless Steel Piston Rod Integral Mechanical
More informationFabrication Series Hydraulic Press Brake 14' x 242 Tons
Box 20, Grp. 200, RR2, 390 Eagle Drive, Winnipeg, MB R3C 2E6 Canada Toll Free 800-665-8089 Ph: 204-779-7791 Fax: 204-779-7796 Email: sales@empire-machinery.com December 18, 2017 Technical Specifications:
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationStearns Heavy Duty Clutches & Brakes... Rugged, Reliable
Stearns Heavy Duty Clutches & Brakes... Rugged, Reliable Stearns heavy duty clutches and brakes represent over 75 years of design, engineering and on-the-job experience. Stearns products are backed by
More informationPERFORMANCE : VALUE PRODUCT CATALOG
PERFORMANCE : VALUE by P a r t n e r s i n P r o d u c t i v i t y PRODUCT CATALOG PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools
More informationGTX Multi-tasking Turning Centers SERIES
GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationHSL / HSLX. HSL / HSLX Hydraulic guillotine shears Sheet Metal. For Impressive Performances
HSL / HSLX HSL / HSLX Hydraulic guillotine shears Sheet Metal WWW.HACO.COM For Impressive Performances 1 The hydraulic guillotine shears of the HSL range are driven by top mounted cylinders. Our long experience
More informationSTORAGE & MATERIAL HANDLING
www.greenlee.com STORAGE & MATERIAL HANDLING Contractors the world over rely on Greenlee storage and material handling solutions to keep product safe. From small chests to large field offices, and now
More informationSADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES:
SADDLE TYPE MANUAL FEATURES: Meehanite cast iron of base, column, saddle, and table provides greater rigidity and highest possible grinding load capacity Ball bearing slideways resist damage due to impact
More informationTechnical Details Coiler head / spool diameter Spool weight (depending on type of spool winding axle)
MOTROL 500 Fig. 1 MOTROL 500 Fig. 2 Coiler head RAPID 480SL Fig. 3 Spool winding axle Fig. 4 Label printer Fig. 5 Label Sample MOTROL 500 This motor driven coil and spool winder enables to wind materials
More informationDECOILING STRAIGHTENING FEEDING ACCUMULATING WELDING REWINDING
DECOILING STRAIGHTENING FEEDING ACCUMULATING WELDING REWINDING Watch Industry Furniture Industry Communications Industry Medical Industry Automotive Industry Bicycle Industry Aircraft Industry Building
More informationBOLT PLANT (Automatic)
BOLT PLANT (Automatic) (a) Automatic High Speed Double Stroke Cold Heading Machines (b) Automatic Bolt Head Trimming and Shank Reducing Machines (c) Automatic Thread Rolling Machines (High Speed) DOUBLE
More informationSERVICE MANUAL ST-1200 ELMO CO., LTD. NAGOYA, JAPAN
ELMO SERVICE MANUAL ST-1200 ELMO CO., LTD. NAGOYA, JAPAN TABLE OF CONTENTS I. DISASSEMBLY A. FRONT & REAR ARM Page 1. Front Arm 1 2. Rear Arm 3 3. Take-up Guide... 4 B. PROJECTION LAMP & LENS 1. Heat Proof
More informationModular. Compact. Loadable. HLM Stroke Module
HLM Modular. Compact. Loadable. HLM Stroke Module Linear module with optimized overall length, pneumatic drive and scope-free pretensioned junction rollers. Field of Application For lifting of workpieces
More informationP/A INDUSTRIES A BRIEF HISTORY TABLE OF CONTENTS. Management & Sales Team. P/A International
SERVO FEEDS P/ INDUSTRIES BRIEF HISTORY For well over a half of a century, P/ has been providing equipment and application solutions to the Metal Stamping, Wire Forming and Fabrication Industries. proven
More information