SANDERS AND ABRASIVES

Transcription

1 22-44 PLUS DRUM SANDER Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustment Precision-machined and balanced extruded aluminum drum is self-cooling Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results Large cast-iron handwheel adjusts height at 1/16" per turn Patented abrasive take-up fasteners make changing abrasives quick and easy Continuous-duty, 1-3/4HP motor is designed for consistent power and long life On/off switch with overload protection is front-mounted for operator s convenience One feed and one drive motor for superior sanding control Self Cooling Drum Infeed /Outfeed Tables (Optional) 4" Dust Port Open Stand w/shelf Set of 4 Casters for Open Stand only Closed Stand w/shelf and Casters Infeed and Outfeed Tables Height Adjustment Handwheel 1-3/4HP TEFC Motor Exclusive Sand Smart Variable Speed Closed Stand STOCK NUMBER K K K Number Plus Plus Plus Style Benchtop Open Stand Closed Stand Max. Sanding Width (in.) 44 (2 passes) 44 (2 passes) 44 (2 passes) Min. Sanding Length (in.) 2-1/4 2-1/4 2-1/4 Max. Sanding Thickness (in.) Min. Sanding Thickness (in.) 1/32 1/32 1/32 Drum Dimensions (diam. x L/in.) 5 x 22 5 x 22 5 x 22 Drum Speed (RPM) Dust Port Diameter (in.) Conveyor Variable Feed Rate (FPM) 43 in.-lbs. Torque, Direct Drive, DC 43 in.-lbs. Torque, Direct Drive, DC 43 in.-lbs. Torque, Direct Drive, DC 0 to 10 0 to 10 0 to /4HP, 1Ph, 115V, 20 Amp 1-3/4HP, 1Ph, 115V, 20 Amp 1-3/4HP, 1Ph, 115V, 20 Amp Net Weight (lbs.) grit abrasive strip, 100 grit abrasive belt, TufTool for wrapping abrasives on sanding drums 65

2 Self Cooling 22" 2-Pass Capacity Drum Shown with optional casters and infeed and outfeed tables Truss-like Carriage Arm Height Adjustment Handwheel Variable Feed/Speed 1-3/4HP Continuous-Duty Motor Infeed/Outfeed Tables (optional) No Give Conveyor Truss-like Carriage Arm Height Adjustment Handwheel Self-cooling 22" 2-pass Capacity Drum Variable-Speed Feed Control Continuous-Duty 1-3/4HP TEFC Motor Locking Casters PRO DRUM SANDER Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute Patented conveyor belt TRACKERS dramatically reduce the need manual belt adjustments 22" wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance Precision-machined and balanced extruded aluminum drum is self-cooling Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results Large cast-iron handwheel adjusts height at 3/32" per turn Depth gauge has locking stop to ensure accuracy Cast-aluminum stand, zinc-plated steel bed, and centerless ground column tube give you solid construction you can depend on Two Motors One feed, one drive for superior sanding control STOCK NUMBER Pro Max. Sanding Width (in.) 44 (2 passes) Min. Sanding Length (in.) 2-1/4 Max. Sanding Thickness (in.) 4 Min. Sanding Thickness (in.) 1/32 Overall Dimensions (H x W x D/in.) 52 x 41 x 41 Drum Dimensions (diam. x L/in.) 5 x 22 Drum Speed (RPM) 1600 Drum Bearing Diameter (in.) 1 Dust Port Diameter (in.) 4 43 in.-lbs. Torque, Direct Drive, DC Conveyor Variable Feed Rate (FPM) 1 to /4HP, 1Ph, V, 20 Amp Net Weight (lbs.) grit abrasive strip, 100 grit abrasive belt, TufTool for wrapping abrasives on sanding drums PRO DELUXE DRUM SANDER Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute Patented conveyor belt TRACKERS dramatically reduce the need manual belt adjustments 22" wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance Precision-machined and balanced extruded aluminum drum is self-cooling Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results Large cast-iron handwheel adjusts height at 3/32" per turn Depth gauge has locking stop to ensure accuracy Cast-aluminum stand, zinc-plated steel bed, and centerless ground column tube give you solid construction you can depend on 1-3/4HP, totally enclosed fan-cooled motor is designed for consistent power and long life Two Motors One feed, one drive for superior sanding control STOCK NUMBER DXK Pro Deluxe Max. Sanding Width (in.) 44 (2 passes) Min. Sanding Length (in.) 2-1/4 Max. Sanding Thickness (in.) 4 Min. Sanding Thickness (in.) 1/32 Overall Dimensions (H x W x D/in.) 52 x 41 x 41 Drum Dimensions (dia. x L/in.) 5 x 22 Drum Speed (RPM) 1600 Drum Bearing Diameter (in.) 1 Dust Port Diameter (in.) 4 43 in.-lbs. Torque, Direct Drive, DC Conveyor Variable Feed Rate (FPM) 1 to /2HP, 1Ph, 110V, 20 Amp Net Weight (lbs.) grit abrasive strip, 100 grit abrasive belt, TufTool for wrapping abrasives on sanding drums Open Stand w/shelf Set of 4 Casters for Open Stand only Infeed and Outfeed Tables Infeed/Outfeed Tables Poly Conveyor Belt Rack N Roll Abrasive Storage System

3 Self Cooling Drum 4" Dust Port EXCLUSIVE Fine-tune Adjustor 1-1/2HP 14 Amp TEFC Motor Large Height Adjustment Handwheel 3" Stock Thickness Capacity Infeed and Outfeed Tables (optional) Exclusive Fine-Tune Adjuster Locking Casters (optional) 3" stock thickness capacity Sand up to 16" in one pass Easy-to-read depth guide Smooth feeding for top results 1HP TEFC Motor Storage Shelf Sand up to 32" in two passes Dust hood with 4" diameter dust port Safety Switch Variable-Speed Feed Belt Control PLUS DRUM SANDER PLUS DRUM SANDER Infinitely variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments Precision-machined and balanced extruded aluminum drum is self-cooling Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results Top-position handwheel adjusts height at 1/16" per turn Patented abrasive take-up fasteners make changing abrasives quick and easy Continuous-duty, 1-1/2HP motor is designed for heavier use for longer periods of time On/off switch with overload protection is front-mounted for operator s convenience Two Motors, One feed on drive for superior sanding control STOCK NUMBER K Plus Sanding Capacities Max. Width (in.) 32 (Two Passes) Min. Length (in.) 2-1/4 Max. Thickness (in.) 3 Min. Thickness (in.) 1/32 Overall Dimensions (H x W x D/in.) 18 x 23 x 32 Drum Dimensions (dia. x L/in.) 5 x 16 Drum Speed (RPM) 1725 Drum Bearing Diameter (in.) 1 Dust Port Diameter (in.) 4 43 in.-lbs. Torque, Direct Drive, DC Conveyor Variable Feed Rate (FPM) 0 to /2HP, 1Ph, 110V Net Weight (lbs.) grit abrasive strip, 100 grit abrasive belt, TufTool for wrapping abrasives on sanding drums, metal stand with shelf, one box of Ready to Wrap abrasives Infinitely variable-speed control produces the ultimate finish at a rate from 0 to 12 feet per minute and prevents machine overload Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments Precision-machined and balanced extruded aluminum drum is self-cooling Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results Cast-iron handwheel adjusts height at 1/16" per turn Patented abrasive take-up fasteners make changing abrasives quick and easy 1HP motor is totally enclosed to prevent dust and debris from getting into the housing On/off switch with overload protection is front-mounted for operator s convenience STOCK NUMBER Plus Sanding Capacities Max. Width (in.) 20 (Two Passes) Min. Length (in.) 2-1/4 Max. Thickness (in.) 3 Min. Thickness (in.) 1/32 Drum Dimensions (dia. x L/in.) 5x10 Drum Speed (RPM) 1700 Dust Port Diameter (in.) 4 43in.-lbs. Torque Direct Drive, DC Conveyor Variable Feed Rate (FPM) HP, 1Ph, 115V Net Weight (lbs.) grit abrasive strip, 100 grit abrasive belt, TufTool for wrapping abrasives on sanding drums Poly Conveyor Belt Set of 4 Casters Infeed/Outfeed Tables Open Stand with Shelf Set of 4 Casters for Open Stand only

4 Tracking Control Belt Tension Release 4" Dust port Oscillating Drum Worktable Outer Drum Support Table NEW oscillating feature reduces heat build-up on sanding belt Tracking Control Belt tension release lever and tracking control dial are conveniently located Pivot Release Lever Sanding belt can be locked in at vertical, horizontal and any angle in between Sanding belt can be locked in at vertical, horizontal and any angle in between NEW Adjustable outer drum support table Graphite sandpaper backing OSCILLATING HORIZONTAL/VERTICAL EDGE SANDER NEW oscillating feature reduces heat build-up on sanding belt to reduce loading and burning Sanding belt can be locked in at vertical, horizontal and any angle in between for optimum finishing of your workpiece Quick release lever and tracking control dial are conveniently located for replacing and tracking belts Belt platen is made from precision-ground steel plate for accurate and true sanding results Cast iron table moves up or down to provide exact workpiece positioning 4" dust port hooks up to your dust collection system for efficient dust removal Adjustable outer drum support table enables contour sanding Tilting sanding head for sanding bevels, angles, and flat surfaces STOCK NUMBER OES-80CS Fence (L x H/in.) 24 x 4 Belt Size (L x W/in.) 89 x 6 Table Size (L x W/in.) 32 x 7 Table Tilt (deg.) 90 Belt Speed (SFPM) 3900 Overall Dimensions (L x W x H/in.) 46 x 18 x /2HP, 1Ph, 115/230V, Net Weight (lbs.) 270 Miter Gauge Removable Fence Horizontal Backstop Heavy-duty Stand Sanding Belt OPTIONAL ACCESSORIES See pages 78 81, 107 for details ALUMINUM-OXIDE SANDING BELTS We carry the most popular sanding belts for sanding wood, metal, plastic, and fiberglass. 6" x 89" BELTS All belts have a heavy-duty X weight cloth backing for industrial sanding applications. The larger belts are available in eighter open or closed coat depending upon your application. They fit on many brands of sanders Aluminum-oxide for heavy duty all purpose sanding Butt spliced resin bond for maximum grain retention grit (2 pack) 60 grit (2 pack) 80 grit (2 pack) 100 grit (2 pack) 120 grit (2 pack) 150 grit (2 pack) 180 grit (2 pack) Resin-over-resin bond for maximum grain retention Heavy-duty X weight cloth backing material Electrostatic-applied grain for even cutting action

5 Tracking Control Belt Tension Release Worktable Quick-Release Tension Lever New Outer Drum Support Table Shown in horizontal position Pivot Release Lever Single 4" Dust Port for both Tools Heavy-Duty Closed Stand Heavy-Duty Cast Iron Tables Heavy-Duty Leg Stand Single 4" Dust Port for both tools Shown in Vertical Position K K EDGE HORIZONTAL/VERTICAL SANDER COMBINATION 6" X 48" BELT / 9" DISC SANDER Sanding belt can be locked in at vertical, horizontal and any angle in between for optimum finishing of your workpiece Belt tension release lever and tracking control dial are conveniently located for accurate and easy adjustments Belt platen is made from precision-ground steel plate for strength and durability Cast iron table moves up or down to provide you full utilization of the table 4" dust port hooks up to your dust collection system for efficient dust removal Adjustable outer drum support table enables contour sanding STOCK NUMBER EHVS-80CS Fence (L x H/in.) 24 x 4 Abrasive Belt Size (L x W/in.) 89 x 6 Table Size (L x W/in.) 32 x 7 Table Tilt (deg.) 90 Belt Speed (SFPM) 3900 Overall Dimensions (L x W x H/in.) 46 x 18 x /2HP, 1Ph, 115/230V, Net Weight (lbs.) 270 Miter gauge, removable fence, horizontal backstop, heavy-duty stand, sanding belt Large cast iron table has preset stops at 90 and 45 to let you use the belt sander vertically, horizontally or anywhere in between Belt Sander platen features a graphite sheet to help the unit run cooler for increased machine and belt life Drive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage Tracking adjustment knob with quick-lock handle keeps belt on track during use Quick-release belt tension lever makes belt changes fast and easy Quick-lock dust cover allows fast disc changes Single 4" dust port on the back of the base collects dust effectively from either machine Powerful 3/4HP motor handles even the toughest sanding jobs Built-in handles for easier portability Heavy-duty steel open-style stand (708596K only) provides solid support STOCK NUMBER K K Number JSG-96 JSG-96OS JSG96CS Style Benchtop Open Stand Closed Stand Sanding Belt (L x W/in.) 48 x 6 48 x 6 48 x 6 Sanding Disc Diameter (in.) Work Table (L x W/in.) 7-1/2 x /2 x /2 x 12 Table Tilt (degrees) 10 up, 45 down 10 up, 45 down 10 up, 45 down Belt Speed (SFPM) Disc Speed (RPM) Overall Dimensions (L x W x H/in.) 16 x 29 x 28-1/2 16 x 29 x 28-1/2 16 x 29 x 28-1/2 3/4HP, 115V 3/4HP, 115V 3/4HP, 115V Net Weight Sanding belt, sanding disc, miter gauge, backstop for horizontal sanding, circle jig One-piece formed steel heavy-duty closed stand (708597K only) provides additional support and additional storage for abrasives OPTIONAL ACCESSORIES See pages 78 81, 107 for details OPTIONAL ACCESSORIES See pages 78-81,107 for details 72 73

6 Belt Tension Release Large Tiltable Work Surfaces 12" Disc Industrial Push Button Controls Single 4" dust port for both disc and belt sanding. Horizontal belt sanding mode shown Powerful 1HP Motor Canister Filter K K K COMBINATION 6" X 48" BELT / 12" DISC SANDER 12" DISC SANDER WITH OPEN STAND AND CANISTER FILTER Two precision-ground cast iron tables have positive stops at 90 and 45 for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between. EXCLUSIVE dual thumbscrew belt tracking adjustment locks to keep belt on track during use Specially designed belt guard allows full use of the 6" belt width and length Single 4" dust port on the back of the base collects dust effectively from either machine Powerful 1-1/2HP motor easily handles the toughest sanding operations Heavy-duty steel open-style stand (708599K only) provides solid support One-piece formed steel heavy-duty closed stand with built-in casters (708598K only) provides solid support and portability STOCK NUMBER K K Number JSG-6DC JSG-6DCK JSG-6CS Style Benchtop Open Stand Closed Stand Sanding Belt (L x W/in.) 48 x 6 48 x 6 48 x 6 Sanding Disc Diameter (in.) Belt Table Tilt (degrees) 20 up, 45 down 20 up, 45 down 20 up, 45 down Disc Table Tilt (degrees) 25 up, 45 down 25 up, 45 down 25 up, 45 down Belt Speed (SFPM) Disc Speed (RPM) /2HP, 1Ph, 115/230V, 1-1/2HP, 1Ph, 115/230V, 1-1/2HP, 1Ph, 115/230V, Built-in dust impeller connects to canister filter to provide virtually dust-free sanding Canister filter efficiently filters particles down to 2 microns Built-in dust collection means no need to set-up a separate collection system Heavy-duty steel sanding disc for even sanding Disc brake quickly slows disc for operator s protection Tilting table has positive stops at 45 and 90 for sanding flat pieces or mitered angles Powerful 1HP motor will sand even the toughest wood Heavy-duty steel open stand provides added support and stability STOCK NUMBER K Number JDS-12OS JDS-12B Style Open Stand Benchtop Disc Diameter (in.) Disc Table (L x W/in.) 9-3/4 x 16-3/8 9-3/4 x 16-3/8 Table Tilt (deg.) 15 up, 45 down 15 up, 45 down Dust Port Diameter (in.) 4 4 Canister Filter 2-Micron n/a Impeller (in.) 9 x 1-13/16 9 x 1-13/16 Overall Dimensions (W x D x H/in.) 49x21x22 21 x 25-5/8 x 21 Miter gauge, circle jig 1HP, 1Ph, 115/230V, 60Hz 1HP, 1Ph, 115/230V, 60Hz Net Weight (lbs.) Net Weight Sanding belt, sanding disc, miter gauge, backstop for horizontal sanding OPTIONAL ACCESSORIES See pages 78 81, 107 for details OPTIONAL ACCESSORIES See pages 78 81, 107 for details Open Stand Closed Stand w/casters Open Stand Replacement Canister Filter

7 Table Insert Extra Large Tilting Work Table Tilts 45º 1" Oscillation Large Work Surface Oil Bath Gear Box Industrial Push Button Controls Spindle Storage Racks One-Piece Steel Stand 1-1/2 Oscillating Action Safety Switch Oil Bath Gear Box Tilts to 45º Five Complete Spindle Assemblies Convenient Storage Racks OSCILLATING SPINDLE SANDER BENCHTOP OSCILLATING SPINDLE SANDER Main spindle support runs on precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism for consistent performance Worm and gear mechanism runs in an oil bath to prolong its life and durability Industrial push-button switch is conveniently located for finger-tip control Powerful 1HP motor is independently mounted inside the base for easy access and service Sturdy one-piece steel stand provides support and stability Spindles have threaded ends for quick, easy changes Table inserts help the dust and debris falling into the motor; help protect operator Built-in storage racks keep spindles and table inserts handy 4" dust port connects to your dust collection system to keep your work area clean STOCK NUMBER JOVS-10 Table Size (in.) 24 x 24 Table Tilt (deg.) 45 Down Spindle Speed (RPM) 1725 Oscillations Per Minute 75 Length of Oscillations (in.) 1-1/2 1HP, 1Ph, 115V Only Net Weight (lbs.) 307 Ten removable spindles: 1/4" dia. x 5" (steel), 3/8" dia. x 6" (steel), 1/2" dia. x 6" (steel), 5/8" dia. x 6" (steel), 3/4" dia. x 9" (steel), 1" dia. x 9" (rubber), 1-1/2" dia. x 9" (rubber), 2" dia. x 9" (rubber), 3" dia. x 9" (rubber), 4" dia. x 9" (rubber), three table inserts, two spindle wrenches 1" oscillating action reduces friction heat to protect wood and prolong sleeve life Oscillation gears run in a sealed lubricated box to prolong their life and durability Table tilts to 45º to accommodate bevel sanding projects Removable on/off safety switch prevents accidental start-up Built-in 2" dust port keeps dust and debris out of the air Powerful 1/2HP induction motor easily handles the toughest sanding projects Spindles have threaded ends for quick, easy changes Table inserts help the dust and debris falling into the motor; help protect operator Built-in storage racks keep spindles and table inserts handy Four non-skid rubber feet keep machine stable during use STOCK NUMBER JBOS-5 Table Size (in.) 14-1/2 x 14-1/2 Table Tilt (deg.) 0 45 Down Spindle Speed (RPM) 1725 Oscillations Per Minute 30 Length of Oscillations (in.) 1 1/2HP, 1Ph, 110V Only Net Weight (lbs.) 82 Complete 1/4", 1/2", 5/8", 1-1/2" and 2" spindle assemblies, two round table inserts, two oblong table inserts? 3" Spindle Assembly " Table Insert

8 ABRASIVE BELTS AND DISCS ALUMINUM-OXIDE SOFT SANDING SLEEVES We carry the most popular sanding belts and discs for sanding wood, metal, plastic, and fiberglass. Aluminum-oxide for all purpose sanding Electrostatic-applied grain for even cutting action Resin-over-resin bond for maximum grain retention Sanding Belts are butt spliced for bidirectional sanding Sanding Belts are "YX" weight cloth backing material Sanding Discs are "X" weight cloth backing material 3" X 6" SOFT SANDING SLEEVES Carton Pack Grit Grit Grit Grit Grit Assorted Grits 4" X 6" SOFT SANDING SLEEVES Carton Pack Grit Grit Grit DISCS 8" DISCS grit (3 pack) BELTS 6" x 89" BELTS grit (2 pack) Grit Grit Assorted Grits grit (3 pack) grit (2 pack) grit (3 pack) grit (2 pack) grit (3 pack) grit (2 pack) grit (3 pack) grit (3 pack) 9" DISCS grit (3 pack) grit (3 pack) grit (3 pack) grit (3 pack) grit (3 pack) grit (3 pack) grit (2 pack) grit (2 pack) grit (2 pack) 6" x 48" BELTS grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) 6" X 6" SOFT SANDING SLEEVES Carton Pack Grit Grit Grit Grit Grit Assorted Grits 10" DISCS grit (2 pack) grit (2 pack) 6" x 80" BELTS grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) 12" DISCS grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) 20" DISCS grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) grit (2 pack) 1" x 42" BELTS grit (3 pack) grit (3 pack) grit (3 pack) grit (3 pack) grit (3 pack) grit (3 pack) 1" x 48" BELTS * grit (3 pack) * grit (3 pack) * grit (3 pack) * grit (3 pack) * grit (3 pack) * grit (3 pack) * Silicon carbide "X" weight ALUMINUM-OXIDE HARD SANDING SLEEVES 1" X 2" SANDING DRUM AND SLEEVES Sanding Drum Assorted Grit Sleeves (6 pack) Coarse Grit Sleeves (6 pack) Medium Grit Sleeves (6 pack) Fine Grit Sleeves (6 pack) 5 1/2" HARD SLEEVES Diameter (in.) /2 Assorted Grits /2 60 Grit Sleeves (4 pack) /2 80 Grit Sleeves (4 pack) /2 100 Grit Sleeves (4 pack) /2 120 Grit Sleeves (4 pack) Assorted Grit Sleeves Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Assorted Grit Sleeves Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) 78 79

9 ALUMINUM-OXIDE HARD SANDING SLEEVES READY-TO-WRAP ALUMINUM-OXIDE SANDING STRIPS 6" HARD SANDING SLEEVES 9" HARD SANDING SLEEVE READY-TO-WRAP STRIPS FOR JET Stock No. Diameter (in.) /4 Assorted Grit Sleeves /4 60 Grit Sleeves (4 pack) /4 80 Grit Sleeves (4 pack) /4 100 Grit Sleeves (4 pack) /4 120 Grit Sleeves (4 pack) /8 Assorted Grit Sleeves /8 60 Grit Sleeves (4 pack) /8 80 Grit Sleeves (4 pack) /8 100 Grit Sleeves (4 pack) /8 120 Grit Sleeves (4 pack) /2 Assorted Grit Sleeves /2 60 Grit Sleeves (4 pack) /2 80 Grit Sleeves (4 pack) /2 100 Grit Sleeves (4 pack) /2 120 Grit Sleeves (4 pack) /8 Assorted Grits /8 60 Grit Sleeves (4 pack) /8 80 Grit Sleeves (4 pack) /8 100 Grit Sleeves (4 pack) /8 120 Grit Sleeves (4 pack) Stock No. Diameter (in.) /4 Assorted Grit Sleeves /4 60 Grit Sleeves (4 pack) /4 80 Grit Sleeves (4 pack) /4 100 Grit Sleeves (4 pack) /4 120 Grit Sleeves (4 pack) Assorted Grit Sleeves Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) /2 Assorted Grit Sleeves /2 60 Grit Sleeves (4 pack) /2 80 Grit Sleeves (4 pack) /2 100 Grit Sleeves (4 pack) /2 120 Grit Sleeves (4 pack) Assorted Grit Sleeves Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit (6 wraps in a box) Grit (6 wraps in a box) Grit (6 wraps in a box) Grit (6 wraps in a box) Grit (6 wraps in a box) Grit (6 wraps in a box) Grit (6 wraps in a box) Grit (6 wraps in a box) Grit (6 wraps in a box) Piece Assorted Grits (1 Each: 36 Grit, 80 Grit, 120 Grit) READY-TO-WRAP STRIPS FOR JET & PLUS Grit (4 wraps in a box) Grit (4 wraps in a box) Grit (4 wraps in a box) Grit (4 wraps in a box) Grit (4 wraps in a box) Grit (4 wraps in a box) Grit (4 wraps in a box) Grit (4 wraps in a box) Grit (4 wraps in a box) Piece Assorted Grits (1 Each: 36 Grit, 80 Grit, 120 Grit) Assorted Grit Sleeves READY-TO-WRAP STRIPS FOR JET Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit Sleeves (4 pack) Grit (3 wraps in a box) Grit (3 wraps in a box) Grit (3 wraps in a box) Grit (3 wraps in a box) Grit (3 wraps in a box) Grit (3 wraps in a box) Grit (3 wraps in a box) Grit (3 wraps in a box) Grit (3 wraps in a box) Piece Assorted Grits (1 Each: 36 Grit, 80 Grit, 120 Grit) ALUMINUM-OXIDE HARD SANDING SLEEVES READY-TO-CUT ALUMINUM-OXIDE BULK ABRASIVES 28-PIECE SANDING DRUM SET Piece Drum Sanding Set 1/2" X 2" SANDING DRUM & SLEEVES Sanding Drum Assorted Grit Sleeves (6 pack) Coarse Grit Sleeves (6 pack) Medium Grit Sleeves (6 pack) Fine Grit Sleeves (6 pack) KLINGSPOR BLUE READY-TO-CUT Grit Grit Grit Grit Grit Grit PREMIUM READY-TO-CUT Grit Grit Grit Grit Grit Grit 3" X 3" SANDING DRUM AND SLEEVES 1-1/2" X 2" SANDING DRUM & SLEEVES Grit Grit Sanding Drum Assorted Grit Sleeves Coarse Grit Sleeves Medium Grit Sleeves Fine Grit Sleeves Sanding Drum Assorted Grit Sleeves (6 pack) Coarse Grit Sleeves (6 pack) Medium Grit Sleeves (6 pack) Fine Grit Sleeves (6 pack) 6" PNEUMATIC SANDING DRUMS STOCK NO. DIAMETER (IN.) PIECE SANDING SLEEVE SETS 3/4" X 2" SANDING DRUM & SLEEVES Assorted Grits Sleeve Set Coarse Grit Sleeve Set Medium Grit Sleeve Set Fine Grit Sleeve Set Sanding Drum Assorted Grit Sleeves (6 pack) Coarse Grit Sleeves (6 pack) Medium Grit Sleeves (6 pack) JET STICKS STOCK NO. DESCRIPTION JS-1, JET Stik Belt Cleaner Fine Grit Sleeves (6 pack) 80 81