Stub Mill Holders, Boring Head, Blank Bar

Transcription

1 Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119

2 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers, location shafts and arbor spacers to ensure clamping of cutting tools and rigid machining capability. Taper ground to AT3 or better to ensure 80% taper contact Surface ground to maintain.0002 or better perpendicularity to centerline ensuring flat engagement of cutting tool Nickel Chrome 4140 alloy body h6 precision ground pilot for concentric and repeatable mounting diameter 1/8, 1/4, 3/8 and 1/2 inch ground arbor spacers included with every holder for flexibility Heat treated and coated nickel chrome nut prevents wear and increases clamping pressure 120

3 Stub Mill Holders CAT and BT Stub Mill Holders Taper ground to AT3 or better to ensure 80% taper contact 1/8, 1/4, 3/8 and 1/2 ground arbor spacers included with every holder h6 precision ground pilot for concentric and repeatable mounting diameter Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. CAT40/50 Part Number Taper d 1 Key Size C CT /4 C CT40 1-1/ /16 C CT40 1-1/ /8 C CT /4 C CT50 1-1/ /16 C CT50 1-1/ /8 Note: 1/8, 1/4, 3/8 and 1/2 arbor spacers and securing nut included as standard with all listed toolholders. BT30/40/50 Part Number Taper d 1 Key Size B BT30 3/ /8 B BT /4 B BT /4 B BT40 1-1/ /16 B BT40 1-1/ /8 B BT /4 B BT50 1-1/ /16 B BT50 1-1/ /8 Note: 1/8, 1/4, 3/8 and 1/2 arbor spacers and securing nut included as standard with all listed toolholders. TIR: <.0002 run out along pilot Speed: up to 15,000 rpm Set-up: quick and easy Coolant-thru: opt. not available Accessories: Replacement Nut Page 123 Replacement Spacer Page

4 Stub Mill Holders NMTB and R8 Stub Mill Holders Taper ground to AT3 or better to ensure 80% taper contact 1/8, 1/4, 3/8 and 1/2 ground arbor spacers included with every holder h6 precision ground pilot for concentric and repeatable mounting diameter Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. NMTB30/40/50 Part Number Taper d 1 Key Size N NMTB30 3/ /8 N NMTB /4 N NMTB30 1-1/ /16 N NMTB40 3/ /8 N NMTB /4 N NMTB40 1-1/ /16 N NMTB40 1-1/ /8 N NMTB /4 N NMTB50 1-1/ /16 N NMTB50 1-1/ /8 Note: 1/8, 1/4, 3/8 and 1/2 arbor spacers and securing nut included as standard with all listed toolholders. NMTB shanks are suitable for use with Erickson QC spindles. R8 Part Number Taper d 1 Key Size R / R /16 Note: 1/8, 1/4, 3/8 and 1/2 arbor spacers and securing nut included as standard with all listed toolholders. TIR: <.0002 run out along pilot Speed: up to 15,000 rpm Set-up: quick and easy Coolant-thru: opt. not available Accessories: 122 Replacement Nut Page 123 Replacement Spacer Page 123

5 Stub Mill Holders Accessories Replacement Nut for Stub Mill Holders Part Number escription ength of Nut 3/4-STUBNUT 3/4 18 mm (0.70 ) 1-STUBNUT mm (0.88 ) 1-1/4-STUBNUT 1-1/ mm (0.88 ) 1-1/2-STUBNUT 1-1/ mm (1.31 ) Replacement Spacer for Stub Mill Holders Part Number escription SP3/4-1/8 1/8 Thick Spacer for 3/4 O Holder SP3/4-1/4 1/4 Thick Spacer for 3/4 O Holder SP3/4-3/8 3/8 Thick Spacer for 3/4 O Holder SP3/4-1/2 1/2 Thick Spacer for 3/4 O Holder SP1-1/8 1/8 Thick Spacer for 1 O Holder SP1-1/4 1/4 Thick Spacer for 1 O Holder SP1-3/8 3/8 Thick Spacer for 1 O Holder SP1-1/2 1/2 Thick Spacer for 1 O Holder SP1-1/4-1/8 1/8 Thick Spacer for 1-1/4 O Holder SP1-1/4-1/4 1/4 Thick Spacer for 1-1/4 O Holder SP1-1/4-3/8 3/8 Thick Spacer for 1-1/4 O Holder SP1-1/4-1/2 1/2 Thick Spacer for 1-1/4 O Holder SP1-1/2-1/8 1/8 Thick Spacer for 1-1/2 O Holder SP1-1/2-1/4 1/4 Thick Spacer for 1-1/2 O Holder SP1-1/2-3/8 3/8 Thick Spacer for 1-1/2 O Holder SP1-1/2-1/2 1/2 Thick Spacer for 1-1/2 O Holder 123

6 Boring Head Holders CAT, BT and NMTB Boring Head Holders Taper ground to AT3 or better to ensure 80% taper contact Ground surfaces Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. CAT40/50 Part Number Taper Thread 1 C40BH CT40 7/ C40BH CT40 1-1/ C50BH CT50 7/ C50BH CT50 1-1/ BT30/40/50 Part Number Taper Thread 1 B30BH BT30 7/ B30BH BT30 1-1/ B40BH BT40 7/ B40BH BT40 1-1/ B50BH BT50 7/ B50BH BT50 1-1/ NMTB40/50 TIR: <.0002 run out along pilot Speed: up to 15,000 rpm Set-up: quick and easy Coolant-thru: opt. modification 1 1 Part Number Taper Thread 1 N40BH NMTB40 7/ N40BH NMTB40 1-1/ N50BH NMTB50 7/ N50BH NMTB50 1-1/ NMTB shanks are suitable for use with Erickson QC spindles

7 Blank Bars CAT and BT Blank Bars Taper ground to AT3 or better to ensure 80% taper contact Suitable for all applications even deep boring Ground and hardened surfaces except projection of the toolholder Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. CAT40/50 Part Number Taper C CT C CT BT30/40/50 Part Number Taper B BT B BT B BT TIR: <.0002 run out along pilot Speed: up to 15,000 rpm Set-up: quick and easy Coolant-thru: opt. modification 125

8 Blank Bars NMTB and HSK Blank Bars NMTB40/50 Part Number Taper N NMTB N NMTB NMTB shanks are suitable for use with Erickson QC spindles. HSK40A/63A/100A Part Number Taper HSK40A-BANK-8.00 HSK40A HSK63A-BANK HSK63A HSK100A-BANK HSK100A Note: Coolant tube and coolant tube wrench are not included. Other HSK sizes are available as specials. Please contact us for more information. Coolant Tube Wrench for HSK Holders Part Number HSK63-WRENCH HSK40-WRENCH HSK100-WRENCH escription Wrench for HSK63 Coolant Tube Wrench for HSK40 Coolant Tube Wrench for HSK100 Coolant Tube Coolant tube wrenches are needed to remove or install coolant tubes in HSK toolholders Coolant Tube for HSK Holders Part Number HSK63-TUBE HSK40-TUBE HSK100-TUBE escription Coolant Tube for HSK63 Holders Coolant Tube for HSK40 Holders Coolant Tube for HSK100 Holders 126