Automatic Drilling and Tapping Units
|
|
- Pamela Ferguson
- 5 years ago
- Views:
Transcription
1 Automatic Drilling and Tapping Units Contents Page Automatic drilling and tapping units Dimension sketches... 23
2 Introduction More mechanization in your drilling operations Simple and cost effective, Atlas Copco automatic drilling and tapping units cut costs by reducing machining time in ancillary equipment, or in highly automated special machines. Modular designs allow the units to be easily replaced, transferred to other machines, or combined to form new special-purpose machines. Selection Guide LBL (M12) 32.0 (M1) 25 Steel Aluminum (M) 20.0 (M12) LBL (M) 11.0 (M) (M5) 13.0 (M) LBL
3 LBL These units are available in three sizes, LBL25, LBL35 and LBL5, each size covering a specifi c diameter range, totally up to 20 mm in steel. The basic units can be fi tted with different chucks, twin heads for simultaneous drilling of two holes and attachments for chip removal and tapping. Highly dependable LBL drilling and tapping units feature quick and precise clamping, making them highly dependable. Easy to build together Several holes can be drilled in a single operation since several of these compact units can easily be built together. Low noise level The units have a low noise level as the exhaust air is discharged through silencers inside the protective casing. Capacity Max Air consumption Alumi Feed output Feed Free Weight Steel num force stroke speed Max output Free speed Model mm mm N kw hp mm r/min kg lb l/s cfm l/s cfm LBL25E LBL25E LBL25E LBL25E LBL35E LBL35E LBL35E 0.0 a.0 b LBL35E c 13.0 d LBL5E LBL5E LBL5E LBL5E 00.0 c 22.0 d LBL5E e 32.0 f Recommended max tappping size: a M b M5 c M d M e M12 f M1 259
4 Accessories Optional Accessories LBL25 Designation Hydraulic damper (feed stroke 5 mm) Key chuck (0-.5 mm) Key chuck (2- mm) Hydraulic damper LBL35 Designation Hydraulic damper (feed stroke 5 mm) Key chuck ( mm) Sleeve chuck ( mm) Twin spindle head, speed ratio 1:1, center to center adjustment range mm Other multiple heads on request Tapping unit, M2-M SPD3, Taper socket J Holder for tapping unit SPD Collet mm Collet 5-.3 mm Tapping unit, M3-M12 SPD5, Tapping Socket J Holder for tapping unit SPD Collet mm Collet.5-. mm Collet - mm Key chuck Sleeve chuck Morse taper socket LBL5 Designation Hydraulic damper (feed stroke 1 mm) Key chuck ( mm) Sleeve chuck ( mm) No. 2 Morse taper socket No. 3 Morse taper socket Twin spindle head, speed ratio 1:1, center to center adjustment range mm Other multiple heads on request Tapping unit, M15-M SPD, Taper socket, J3 Holder for tapping unit SPD Collet - mm Programmed damping device Model LBL35, To be used together with the hydraulic damper. Tapping unit Twin spindle head Programmed damping device 20
5 Accessories Optional Accessories Collets for Twin head LBL35 Size mm Size mm Collets for Sleeve chuck LBL35/5 Twin head LBL5 Size mm Size mm Mountings Ref. No. Designation LBL25, LBL35 LBL5 2 1 Base plate Base plate Column mount Side mount Crossmount Column socket 500 mm long mm long mm long mm long Column 500 mm long mm long mm long Locking bar a a 9 Locking bar a a a Two per unit
6 Accessories Optional Accessories Tip mount Dimensions, mm Max Model stroke L D M M ØD LBL M5x1.5L LBL M5x1.5L L Drill guide (Screw mount) Dimensions, mm A a B C D E F G H I M5x1.5L M5x1.5L M5x1.5L C B E A F D a Dimensions mentioned under A refer to the outside diameter for drill guide bushings. Drill guide (Bayonet mount) Dimensions, mm A a B C D E F G H I M5x 1.5L h M5x 1.5L h a Dimensions mentioned under A refer to the outside diameter for drill guide bushings. D C B I E E A H Drill guide (Bayonet mount) A Dimensions, mm A a B C D E F G H I F a Dimensions mentioned under A refer to the outside diameter for drill guide bushings. Dimensions H F E AA G D D C Dimension sketch LBL25 55 UNF 3/" -2-2A Ø 30 Max stroke 22 Ø 5H 5. Ø /" BSP 1/" BSP 1/" BSP , min. 50 M5 20 H M5
7 Dimensions Dimension sketch LBL35 3 Spanner 19 Spanner 20 Hydraulic damper 0 Ø 2 39 ~ H Max Max stroke Tapered mount kona 33JT ± H ~1 Min. 50 Sleeve chuck 23. mm Ø 9 Ø 2 ~5 Ø 52.5 SPD 5 SPD 3 ~3 39 ~12 ~13 mm 3. mm mm 1. mm Dimension sketch LBL5 Hydraulic damper 95 ~ Max 95 Min 19 Ø 1. Ø Ø 3 ~5 Max stroke 120 Ø 59 2 SPD 200 Tapered mount kona JT3 Ø5H Ø /" BSP 3/" BSP 1/" BSP 1/" BSP Min Sleeve chuck 2. mm 55 MK 2 ~ MK 3 ~1 3.5 mm 3. mm mm 1. mm 0± MK 2 ~11 MK 3 ~13 A-A H
8 Dimensions Dimension sketch Mountings for LBL25E and 35E 3. ØP9 Ø Ø js Ø11 Ø.5 ØP js ØH Ø.5 Ø Ø59.H H9 5 ± Ø.5 5 ± Ø = = H9 5 ± Ø ØP9Ø Ø Ø Ø Ø59.H11 Ø59.H11. 5 H Ø Ø Ø59. Dimension sketch Mountings for LBL5E 15 js js 15 js ØP H9 ± Ø.5 Ø ± = = = = 00 H9 ± Ø9.5H11 Ø9.5H H Ø 9.5 Ø Ø9.5 2
Atlas Copco Drills. Higher level of performance
Atls Copco Higher level of performnce Pistol Grip LBB, COMBI Regrdless of which model you choose, you'll get product with superior ergonomics nd productivity. Quiet Very low noise level. Comfortble grip
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationAuto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
More informationAIR MOTORS. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
AIR MOTORS 60 W to 900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationPERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
More informationAIR MOTORS. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
AIR MOTORS 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More informationSELF-FEED DRILL UNITS MK III BROOMATIC SALES/ENGINEERING FEATURES
SELF-FEED DRILL UNITS MK III BROOMATIC SALES/ENGINEERING FEATURES The Building Blocks of Low Cost Drilling and Tapping Automation Table of Contents PAGE 1 FIG. 1 PNEUMATIC MK III WITH STANDARD 3/8 CAPACITY
More informationUNIVERTOR A. Pick-up-turning centre. The systems supplier for manufacturing technology from one source
The systems supplier for manufacturing technology from one source A flexible pick-up turning system for small, medium and large-volume production UNIVERTOR A Pick-up-turning centre Pick-up-turning procedure
More informationHSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
More informationCOST-EFFECTIVE AUTOMATION COMPACT UNITS FOR
COST-EFFECTIVE AUTOMATION COMPACT UNITS FOR DRILLING TAPPING MILLING www.esystems.com You will find units for Drilling, Tapping and Milling installed wherever increased rates of production are required.they
More information> MADE IN GERMANY. Powerful solutions passionate people. Range of Tools. Drilling machine KDXS
> MADE IN GERMANY Powerful solutions passionate people Range of Tools Drilling machine KDXS Range of tools Drilling Machine KDXS Productivity and quality are always results of optimal coordinated machines
More informationAir Motors to 3.9 hp (0.16 to 2.9kW) Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
Air Motors 0.21 to 3.9 hp (0.16 to kw) Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating
More informationAir Motors. 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques. More Than Productivity
Air Motors 160 W to 2900 W Comprehensive range Lubrication free Stainless steel High torques More Than Productivity Why choose Desoutter Air Motors? Desoutter offers a wide range of rotating vane air motors
More informationELECTRIC POWER TOOLS SIM180
New Products ELECTRIC POWER TOOLS SIM180 7 Polisher SIM115 4 1 / 2 Angle Grinder Voltage - 230v Frequency - 50hz Rated Power - 1300w Electronic Speed Control Maintains Constant Speed Under Load Soft Start,
More informationWSK COLLET CHUCK CHCHUCK WSK COLLETWS UC K K CO LL ET 74
WS K COLLET COLL CO LLET ET CHUC CH UCK 74 MAS403 BT-P CODE NO. D1 D2 L1 COLLET NUT G1 BT30 P6-2.0-6.0 19.6 6 N6 M8X1.0 P10-2.0-10.0 27.5 10 N10 M11X1.0 P6-2.0-6.0 19.6 P6-6 N6 M8X1.0 BT40 P10-2.0-10.0
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationPNEUMATIC SCREWDRIVERS
PNEUMATIC SCREWDRIVERS Introduction Pneumatic Screwdrivers High accuracy, good ergonomics Atlas Copco pneumatic screwdrivers bring accuracy and good ergonomics into the production process, while offering
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationDrill Selection Guide
Drill Selection Guide PISTOL GRIP TOOL TYPE FREE SPEED STINLESS STEEL TITNIUM HRD CST IRON, MEDIUM HRD SOFT CST IRON, MILD STEEL HRD PLSTICS LUMINIUM, RSS, COPPER, COMPOSITE WOOD, SOFT PLSTICS, STEEL RONZE
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More informationMODELS 46 ARA 46 ARAS 46 ARAC 46 RASD
General Safety and Maintenance Manual MODEL 46RAS shown with 4 Guard. Model Number Exhaust Direction Front Side Throttle Type (L) Lever (K) Safety Lever Speed 13000 to 14000 R.P.M (13500rpm is standard)
More informationSelection guide for drills
CAT_BOSCH_2011-02_EN_bosch_production-tools_catalogus_Pneumatic-Tools-for-Industry_Boormachines pagina 1 van 9 6 Drills and rotary hammer Air Tools for Industry Selection guide for drills Choosing a drill
More information3260:- 1/2 6220:- 3/4 6220:- 1
3260:- 1/2 6220:- 3/4 6220:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More information9500:- SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER. CP AA5VK Art nr SPECIAL OFFER OFFER. People. Passion. Performance.
SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER 9500:- P remium Tool CP3650-120AA5VK Art nr 6151607180 Spindle thread:...m14 Wheel size:...125 mm Power:...1700 W Free speed:...12000 rpm Length:...238
More informationSLUGGER CUTTERS Airforce 35. Airforce 45
Airforce 35 A compact pneumatic drill ideally suited to space restricted and hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry. Combining a
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationcost-effective automation
cost-effective automation compact units for drilling tapping milling www.e2systems.com AIR HYDRAULIC DRILLING UNIT BE(FP)22 AIR HYDRAULIC DRILLING UNIT BE(F) 22 The basic design of the BE(F) 22 consists
More informationManual. Pneumatic Drilling Unit Series BEP 22 SK. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Pneumatic Drilling Unit Series BEP 22 SK Read this manual before installation and commissioning of the product. Keep for future reference. MAN027 - Manual BEP 22 SK, EN, Rev. 01.doc Table of
More informationThrottle Type (L) Lever or (K) Safety Lever. Weight Length Diameter Air Aluminum Steel. 9.1 Inches (231 mm) 3.5 Lbs (1.6 Kg)
HENRY TOOLS Industrial Airtools at Wk General Safety and Maintenance Manual C C MODEL 46RAS shown with 4 Guard. MODEL 46RAC with 1/4 Collet f use with mounted points carbide burrs. Model Exhaust Number
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More information2666:- 1/2 5095:- 3/4 5095:- 1
2666:- 1/2 5095:- 3/4 5095:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More information> MADE IN GERMANY. Powerful solutions passionate people. Range of Tools. Drilling machines
> MADE IN GERMANY Powerful solutions passionate people Range of Tools Drilling machines KF Range of tools drilling machine KF Productivity and quality are always results of optimally coordinated machines
More informationHigh-performance products. Designed for you!
High-performance products. Designed for you! Impact Wrenches CP6748EX-P11R ATEX Art nr 6151590570 CP6768EX-P18D ATEX Art nr 6151590580 CP6778EX-P18D ATEX Art nr 6151590590 Dust-proof (IP6) and ATEX certified
More informationcontrols BE 11 / HFs 100 BE 22 sk(m) and 33 sk(m) Working Pressure Working Pressure Air Air options
controls E s units are designed for automation and are simple to connect. The following installation example shows connections and the peripheral equipment required by the units. When installing several
More informationBNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA
BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationEXCISION Piccolo Magnetic Base Drill
4.1 EXCISION Piccolo Magnetic Base Drill Core Drill Capacity: Up to 40mm Ø x 50mm Depth Extremely manoeuvrable & easy to carry. Only 10.6kg! Solid Brass Guides guarantees rigidity for increased cutter
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationDrills - Pistolgrip. ergonomic optimum power-to-weight ratio simple operation reversible
Screwdriving technology Automation Air motors Air tools s Pistolgrip ergonomic optimum powertoweight ratio simple operation reversible Our line of drills are especially robust air tools for the drilling
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationPRODUCT GUIDE BROBO GROUP. brobo.com.au. All Brobo Machines & Parts include a 2 year Warranty. Certified System. Quality ISO 9001 AND OWNED
A L I F E T I M E O F R E L I A B I L I T Y PRODUCT GUIDE BROBO GROUP AND OWNED Certified System Quality ISO 91 TM All Brobo Machines & Parts include a 2 year Warranty S315D, S35D & S4B FERROUS METAL CUTTING
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationPneumatic Torque Motors
Pneumatic Torque Motors Contents and Torque Motor Selection Contents Torque Motor Selection... page 2 Torque Controlled Shut Off... page 4 SC Series... page 4 SD Series... page 6 F Series... page 8 Accessories...
More informationKeyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors
Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose
More informationSurface drilling rig. Explorac R50 on truck. Atlas Copco Exploration Products. Features
Atlas Copco Exploration Products Surface drilling rig Explorac R50 on truck It is a robust and reliable drill unit, making it ideal for remote areas. It is designed to perform an outstanding base platform
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More informationMULTI-SPINDLE HEADS PLEASE NOTE
MULTI-SPINDLE HEDS MULTI-SPINDLE HEDS head is information on the range of multi-spindle heads available from E2. Multi-spindle heads enable tools to be closer together than with separate units, and all
More informationADVANCED LINE. All airmotors can also be used without lubrication.
Screwdriving technology Automation Air motors Air tools ADVANCED LINE Stainless Steel Air s from 20 W / 0.03 Hp up to 1.2 kw / 1.6 Hp NEW MOTOR RANGE High torque motors made from stainless steel: Our ADVANCED
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).
More informationTaladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS
RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationMODELS 48 RA 48 BRA2 48 BRA4 48 BRAD 48 RAS 48 RAZ 48 RAD 48 RAC
General Safety and Maintenance Manual Model Number 48BRA 48BRAZ 48BRAC 48BRAD Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 9000 to 11000 R.P.M. (11000 is Standard)
More informationIndustrial. Ready when you are. RediPower. Tools
RediPower Industrial Tools Ready when you are RediPower Ready when you are Available, cost effective, and durable are recognized attributes of the RediPower products. Since their introduction in the mid
More informationBNA42MSY Fixed Headstock Type CNC Automatic Lathe
BNA42MSY Fixed Headstock Type CNC Automatic Lathe 2 BNA-42MSY Citizen MSY With two spindles, the subspindle having an additional X axis, a Y axis turret and the latest Mitsubishi control, the BNA-42MSY
More informationCOST-EFFECTIVE AUTOMATION
E Systems specialise in the design and production of Drilling and Tapping units and pneumatics/hydraulics according to customer specification. Our business is based on long experience and cutting-edge
More informationSYNCHRO TAPPER TM. Servo series. Mechanicai feed type tapping unit
Servo series The tapping unit is equipped with C servo motor to achieve highly accurate and efficient tapping. Compacttype tapping unit with total length of 3. Upgrades efficiency for tapping small size
More informationPneumatic Corner Drill
Maschinenfabrik GmbH Pneumatic Corner Drill Type 2 1602 0030 Illustration can differ from the original Operation and Maintenance Manual Compiled: 31.07.08 216020030_en.doc Page 1 of 12 TECHNICAL SPECIFICATION
More informationRight Angle Die Grinders
Right Angle Die Grinders INFORMATION PAGES Section Contents Page Power Inserted Tooling Type/Size Features 22 250RAD 23 250RAED (3/8 ) Durable Head Design with Small Motor Durable Head Design & Extended
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationComponents for Machine Building. Power Feed Units
Components for Machine Building Power Feed Units Standard and Custom Components to Fit Your Needs Exactly If you re building equipment to drill, tap, chamfer or thread, Hause Machines can help you create
More informationDesign principle / Technical features
Design principle / Technical features Components and construction groups IV 4 Stationary opening unit - Construction group IV. Non-rotating distributor. Non-rotating housing. Housing, axial movable Power
More informationVýhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationAtlas Copco PRO. Industry and Maintenance
Atlas Copco PRO Industry and Maintenance Contents www.atlascopco.com/pro Impact wrenches 6 Ratchet wrenches 16 Screwdrivers 22 Drills 28 angle and Vertical grinders 34 Die grinders 40 Sanding & Polishing
More informationStraight Drills. ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions
Screwdriving Technology Automation Air Motors Air Tools Straight Drills ergonomic optimum power-to-weight ratio simple operation high variability, customer-specific solutions Our line of drills are especially
More informationLinear guides MGE 13.2 Linear guides
13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationSpare parts list. Petrol breakers CP Drill.
Spare parts list Petrol breakers CP Drill www.cp.com CP Drill Spare parts list General information This spare parts list applies to the following: Part number Description 8318 0900 40 CP Drill 22x108 mm
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More informationShape of Chisel Bush. WG- Round FC-1Z-2~4Z-2 WH- Hex FC-1Z-1~4Z-1. ø14 WG- ø14 WH- Shank mm WJ-8SL 200. Round FC-01SA WJB-8F 200 FC FC-01
Accessories CHISELS FOR FC-SERIES CHISELS / MODELS REFERENCE Sign Shape of Chisel Bush WJ- FC-01-4 WJB- FC-01-3 Sign Shape of Chisel Bush WG- FC-1Z-2~ WH- FC-1Z-1~ Sign P F SL Chisel End Shape Point Flat
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationUniversal. CNC Turning machine TNA500 TNA600
Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time
More informationGUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner
the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY
More informationAutomatic Machining Tools
Automatic Machining Tools ARO AMT Catalog_new_BW.qxd:20001893 Catalog 9/17/07 6:15 PM Page 1 Table of Contents Numerical Model Index...2 Tool Selection...4 ARO Automatic Machining Tools...5 Electric/Pneumatic
More informationRH 571-5L, 571-5LS. Spare parts list. Rock drills Construction Tools PC AB No
Rock drills 2015 Construction Tools PC AB No. 9800 0808 01 2015-06 General information This spare parts list applies to the following: Part number Description 8311030129 RH 571-5L 8311030137 RH 571-5LS
More information1 Collets and collet sleeves
1 1.3 Wibemo - Honing sleeve 1.4 Wibemo - Extenso collets 1.6 Wibemo - Croco collets 1.10 Wibemo - CuBe collets 1.11 Wibemo - Phenol collets 1.12 Custom made collets 1.18 Wibemo - Wifex collets 1.22 Tornos
More informationClamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3
equipment rill chucks Reducing bushes Centre points Front-face carrier From page 40-3 and-operated chuck Power chuck Collet chuck ydraulic cylinder From page 40-17 Jaws Slot nuts From page 40-34 ssembly
More informationCOST-EFFECTIVE AUTOMATION
E Systems specialise in the design and production of Drilling and Tapping units and pneumatics/hydraulics according to customer specification. Our business is based on long experience and cutting-edge
More information.com More than a machine. Power your life
Mechanical Clamp, Precise working Solid Radial Drilling Machines ideal for Versatile use in the Single Part and Series Production This kind of MM-R40V is the Mechanical Clamp 40mm Solid Radial Drilling
More informationAir Polishers. effective high power output - low weight ergonomic long lifespan
Screwdriving Technology Automation Air Motors Air Tools Air s effective high power output - low weight ergonomic long lifespan Our polishers are designed to perform best on heavy duty, industrial applications.
More informationStands. MC55 Cylinder-Operated Stand With Linear Bearings. R55-S Lever-Operated Stand. D54 Lever-Operated Stand For SD, DM6, 2DM6 Motors
Stands MC55 Cylinder-Operated Stand With Linear Bearings Part No. 902914 Weight: 70.4lb (32kg) Max. Stroke: 4 in. (100mm) Max. Mounting Plate Load: 150lb (68kg) 8.66 9.84 40.16 7.05 25.43 Max approx. 1.57
More informationCreusen Professional Floor-standing/Bench Drill Presses 8000
Creusen Professional Floor-standing/Bench Drill Presses 8000 A series of floor-standing and benchtop drill presses for the professional user featuring the qualitythat you can expect from Creusen. The models
More information20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)
20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain
More informationSENSITIV T-TA. Boring and facing heads with manual and automatic feed
SENSITIV T-T Boring and facing heads with manual and automatic feed 8 SENSITIV T-T General features The line of T-T boring and facing heads is provided with radial feed movement of the radial slide while
More informationG0616 Column & Base Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P06160001 CAP SCREW M8-1.25 X 140 49 P06160049 SPLINED SHAFT 2 P06160002 REAR ACCESS PANEL 50 PK79M KEY 10 X 8 X 55 3 PVA58
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationHENRY TOOLS. General Safety and Maintenance Manual MODELS 4402-RAS 4402-RASK 4402-RASC
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual K C Model Number 4402RAS 4402RAC Exhaust Direction Front or Side Throttle Type (L) Lever or (K) Safety Lever Speed 13500 R.P.M.
More informationHigh Performance Vertical Turning Center
High Performance Vertical Turning Center The vertical turning center is designed for long term accuracy, heavy duty cutting and to minimize floor space. Its powerful spindle drives, meehanite casting and
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More information