DIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...

Size: px
Start display at page:

Download "DIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER..."

Transcription

1 IN SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50 SIE AN FACE CUTTER ARBOR MORSE TAPER AAPTOR Tanged End...52 THREAE MIING HOER

2 SHANK ETAIS IN IN A 7/24 Ø IN B 7/24 Ø B G B G Machine esign B G IN (Form A / B) M M M B G /8-11 ANSI / CAT / "-8 42

3 COET CHUCK HOER Standard ength Part No. as per Suitable Clamp- Stopper Approx. IN Form A for ing Nut Screw Spanner Wt. in Coolant Thro Pull stud Collet Range Kgs IN FT SK40 CCH ER ER NUT ER 16 7/16-20 SP ER FT SK40 CCH ER ER NUT ER 20 M 14 X 1.5 SP ER FT SK40 CCH ER ER NUT ER 25 M 18 X 1.5 SP ER 25 W 1.0 FT SK40 CCH ER ER NUT ER 32 M 22 X 1.5 SP ER 32 W 1.1 FT SK40 CCH ER ER NUT ER 40 M 22 X 1.5 SP ER 40 W 1.3 FT SK45 CCH ER ER NUT ER 16 7/16-20 SP ER FT SK45 CCH ER ER NUT ER 20 M 14 X 1.5 SP ER FT SK45 CCH ER ER NUT ER 25 M 18 X 1.5 SP ER 25 W 1.8 FT SK45 CCH ER ER NUT ER 32 M 22 X 1.5 SP ER 32 W 2.1 FT SK45 CCH ER ER NUT ER 40 M 28 X 1.5 SP ER 40 W 2.1 FT SK50 CCH ER ER NUT ER 16 7/16-20 SP ER FT SK50 CCH ER ER NUT ER 20 M 14 X 1.5 SP ER FT SK50 CCH ER ER NUT ER 25 M 18 X 1.5 SP ER 25 W 2.9 FT SK50 CCH ER ER NUT ER 32 M 22 X 1.5 SP ER 32 W 3.1 FT SK50 CCH ER ER NUT ER 40 M 28 X 1.5 SP ER 40 W 3.1 Holders with FANGE THRO COOANT Holders supplied on request. Part No. for Flange Thro Coolant - FT SK 45 CCH ER FTC. Collet Nut and Stopper Screw supplied as part of the Chuck. Spanner to be ordered separately. For Collets & Accessories refer Page No. 6 0 & 6 3 For Pull Studs refer Page No

4 COET CHUCK HOER Extended ength Part No. as per Suitable Clamp- Stopper Approx. IN Form A for ing Nut Screw Spanner Wt. in Coolant Thro Pull stud Collet Range Kgs FT SK40 CCH ER ER NUT ER 16 7/16-20 SP ER FT SK40 CCH ER ER NUT ER 20 M 14 X 1.5 SP ER FT SK40 CCH ER ER NUT ER 25 M 18 X 1.5 SP ER 25 W 1.3 FT SK40 CCH ER ER NUT ER 32 M 22 X 1.5 SP ER 32 W 1.3 FT SK40 CCH ER ER NUT ER 40 M 28 X 1.5 SP ER 40 W 1.6 FT SK45 CCH ER ER NUT ER 16 7/16-20 SP ER FT SK45 CCH ER ER NUT ER 20 M 14 X 1.5 SP ER FT SK45 CCH ER ER NUT ER 25 M 18 X 1.5 SP ER 25 W 2.2 FT SK45 CCH ER ER NUT ER 32 M 22 X 1.5 SP ER 32 W 2.7 FT SK45 CCH ER ER NUT ER 40 M 28 X 1.5 SP ER 40 W 2.8 IN FT SK50 CCH ER ER NUT ER 16 7/16-20 SP ER FT SK50 CCH ER ER NUT ER 20 M 14 X 1.5 SP ER FT SK50 CCH ER ER NUT ER 25 M 18 X 1.5 SP ER 25 W 3.2 FT SK50 CCH ER ER NUT ER 32 M 22 X 1.5 SP ER 32 W 3.5 FT SK50 CCH ER ER NUT ER 40 M 28 X 1.5 SP ER 40 W 3.8 Holders with FANGE THRO COOANT Holders supplied on request. Part No. for Flange Thro Coolant - FT SK 45 CCH ER FTC. Collet Nut and Stopper Screw supplied as part of the Chuck. Spanner to be ordered separately. For Collets & Accessories refer Page No. 6 0 & 6 3 For Pull Studs refer Page No

5 COET CHUCK HOER Short NEW MAS BT 403 / JIS 6339 Part No. as per Suitable Clamp- Approx. IN Form A for ing Nut Spanner Wt. in Coolant Thro Pull Stud Collet Range Kgs 40 FT SK40 SCCH ER ER M40X1.5 NUT SER 32 SP SER FT SK50 SCCH ER ER M50X1.5 NUT SER 40 SP SER NUT SPANNER PART NO. NUT SER 20 NUT SER 32 PART NO. SP SER 20 SP SER 32 NUT SER 40 SP SER 40 Collet Nut supplied as part of the Chuck. Spanner to be ordered seperately. For Collets & Accessories refer Page No. 6 0 & 6 3 For Pull Studs refer Page No

6 TAPPING COET CHUCK HOER Rigid Tapping Machines Part No. as per Suitable Tapping Approx. IN Form A for Collet Size Nut Spanner Wt. in Coolant Thro Pull stud Kgs. 40 FT SK40 TCH ER ER 32 M5 - M NUT ER 32 SP ER 32 W FT SK45 TCH ER ER 32 M5 - M NUT ER 32 SP ER 32 W FT SK50 TCH ER ER 32 M5 - M NUT ER 32 SP ER 32 W 4.3 IN HOW TO USE 1. The Collet & Nut are assembled as per normal collet chuck. 2. Insert tap into the collet and tighten the clamping Screw to ensure the square of the tap is clamped and the tap is centered. 3. Tighten the collet nut to clamp the diameter of Tap. 4. Ensure that the collet nut & the clamping screw of tap square are tightened before mounting on machine. The above Tapping Collet Chucks are designed to perform Tapping with Synchronised Feed Mechanism. Collets, Collet Nuts & Spanners are the same as other Standard ER Collet Chuck Holders. Collet Nut supplied as part of the Chuck. Spanner to be ordered seperately. For Collets & Accessories refer Page No. 6 0 & 6 3 For Pull Studs refer Page No

7 SHRINK FIT HOER NEW ' G d 1 2 TAPER Part No. as per Approx. IN Form A d 1 2 I G Wt. in Coolant Thro Pull Stud Kgs. IN FT SK40 SFC M5 1.3 FT SK40 SFC M6 1.3 FT SK40 SFC M8 1.4 FT SK40 SFC M FT SK40 SFC M FT SK40 SFC M FT SK40 SFC M FT SK40 SFC M FT SK40 SFC M FT SK50 SFC M5 3.1 FT SK50 SFC M6 3.1 FT SK50 SFC M8 3.2 FT SK50 SFC M FT SK50 SFC M FT SK50 SFC M FT SK50 SFC M FT SK50 SFC M FT SK50 SFC M FT SK50 SFC M For Pull Studs refer Page No

8 SIE OCK HOER Short & Standard ength T d Part No. as per Approx. Stopper IN Form A d T Wt. in Screw Coolant Thro Pull stud Kgs. FT SK40 EM M8-0.9 FT SK40 EM M8-1.0 FT SK40 EM M FT SK40 EM M10 M FT SK40 EM M10 M FT SK40 EM M10 M FT SK40 EM M10 M FT SK40 EM M12 M FT SK45 EM M8-1.7 FT SK45 EM M8-1.8 FT SK45 EM M FT SK45 EM M10 M FT SK45 EM M10 M FT SK45 EM M10 M FT SK45 EM M10 M FT SK45 EM M12 M FT SK45 EM M12 M IN FT SK50 EM M8-2.8 FT SK50 EM M8-2.8 FT SK50 EM M FT SK50 EM M10 M FT SK50 EM M10 M FT SK50 EM M10 M FT SK50 EM M10 M FT SK50 EM M12 M FT SK50 EM M12 M Holders with FANGE THRO COOANT Holders supplied on request. Part No. FT SK 40 EM FTC) For Pull Studs refer Page No

9 FACEMI & SQUARE SHOUER MI ARBOR 1 1 Part No. as per Cutter Approx. Wt. IN Form A 1 1 ia in Kgs. IN FT SK40 SMS FT SK40 SMS & FT SK40 SMS & FT SK40 SMS FT SK40 SMS FT SK40 SMS FT SK40 SMS FT SK45 SMS & FT SK45 SMS FT SK45 SMS FT SK45 SMS FT SK50 SMS & FT SK50 SMS FT SK50 SMS FT SK50 SMS Clamping Screw supplied as part of the Holder. For Pull Studs refer Page No

10 SIE & FACE CUTTER ARBOR 30 C W Part No. as per Approx. Wt. IN Form A C W in Kgs. FT SK40 SCA FT SK40 SCA FT SK40 SCA FT SK40 SCA FT SK45 SCA FT SK45 SCA FT SK45 SCA FT SK45 SCA FT SK45 SCA IN FT SK50 SCA FT SK50 SCA FT SK50 SCA FT SK50 SCA FT SK50 SCA One set of Spacers, riving Key and Clamping Screw supplied as part of the Arbor. For Pull Studs refer Page No

11 MORSE TAPER AAPTOR Tanged End M.T No: Part No. as per Approx. IN Form A - MT No. Wt. in Coolant Thro Pull stud Kgs. IN FT SK40 MTA FT SK40 MTA FT SK40 MTA FT SK40 MTA FT SK40 MTA FT SK40 MTA FT SK40 MTA FT SK45 MTA FT SK45 MTA FT SK45 MTA FT SK45 MTA FT SK45 MTA FT SK50 MTA FT SK50 MTA FT SK50 MTA FT SK50 MTA FT SK50 MTA FT SK50 MTA FT SK50 MTA FT SK50 MTA FT SK50 MTA For Pull Studs refer Page No

12 THREAE MIING HOER T Part No. as per Approx. IN Form A T Wt. in Coolant Thro Pull stud Kgs. FT SK40 TMH M FT SK40 TMH M FT SK40 TMH M FT SK40 TMH M IN Cutters shown are indicative only and not part of the holders. For Pull Studs refer Page No

13

14 SF. No. 205/1 & 2, 207/1, Kuttai Thottam, Kalapatti, Coimbatore , INIA. Tel : sales@falcontoolings.com Web :

HSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...

HSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER... (IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE

More information

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4 FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp

More information

FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!

FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY! INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC

More information

HPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System

HPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of

More information

Type2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A

Type2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors

More information

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

More information

CAT Shank Tools & Tightening Fixtures

CAT Shank Tools & Tightening Fixtures INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse

More information

Shrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.

Shrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force. SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit

More information

Taper shank arbors for drill chucks

Taper shank arbors for drill chucks KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole

More information

GUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner

GUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY

More information

Quick-change adapters, positive drive inch sizes

Quick-change adapters, positive drive inch sizes P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with

More information

Good reasons to use Albrecht drill chucks

Good reasons to use Albrecht drill chucks 3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened

More information

Balanced to G RPM s. the nose nut to be tightened to 100% Inspected,

Balanced to G RPM s. the nose nut to be tightened to 100% Inspected, WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5

More information

Clamping Tools

Clamping Tools Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

COMPANY INTRODUCTION

COMPANY INTRODUCTION COMPANY INTRODUCTION Uncompromising Quality Utilizing State-of-the-Art Facilities and Equipment DMG-MORI Multitasking CNC Machines The work piece is completed in a single set-up. Assures the best qualities

More information

WSK COLLET CHUCK CHCHUCK WSK COLLETWS UC K K CO LL ET 74

WSK COLLET CHUCK CHCHUCK WSK COLLETWS UC K K CO LL ET 74 WS K COLLET COLL CO LLET ET CHUC CH UCK 74 MAS403 BT-P CODE NO. D1 D2 L1 COLLET NUT G1 BT30 P6-2.0-6.0 19.6 6 N6 M8X1.0 P10-2.0-10.0 27.5 10 N10 M11X1.0 P6-2.0-6.0 19.6 P6-6 N6 M8X1.0 BT40 P10-2.0-10.0

More information

HIGH PRECISION HIGH PERFORMANCE

HIGH PRECISION HIGH PERFORMANCE Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility

More information

CALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!

CALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU! RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A

More information

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent ) SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the

More information

Driven Toolholders for MAZAK Machines

Driven Toolholders for MAZAK Machines Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /

More information

COLLET HOLDER. CTA type. CTH type For high-speed. 3 times longer cutter life with using high-precision collet

COLLET HOLDER. CTA type. CTH type For high-speed. 3 times longer cutter life with using high-precision collet OET HOER M/ TOO OET HOER Ultra precision taper collet chuck The best-suited base holder applicable to all the kinds of machining This holder meets all the requirements for high-speed cutting; Accuracy,

More information

Stub Mill Holders, Boring Head, Blank Bar

Stub Mill Holders, Boring Head, Blank Bar Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,

More information

Multi-Lock Milling Chuck

Multi-Lock Milling Chuck Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting

More information

KTA SPINDLE TOOLINGS

KTA SPINDLE TOOLINGS Price INR R 2013 KTA SPINDLE TOOLINGS SILVER SERIES PRECISION TOOL HOLDERS FOR CNC MACHINES HSK DIN 69893-1 FORM A Features : Special Material with Tensile NEW 2 strength inthe Core Min 950 N/mm. Case

More information

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P: PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters

More information

DETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!!

DETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!! HSK-T ing Systems or Turning Mill M/ ETa-1 OET HOER AGE HEA General Purpose ETa-1 ollet Holder Pull collet type OET HOER 2mm collapsibility with just one collet!! Just 6 collets is all it takes to chuck

More information

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of

More information

CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG

CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders

More information

CCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12

CCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12 AF 90 rill ndmill Fig. 1 F7 ( ) F7 φ=1 7 68 60 ( 55 ) 42 ( 46 ) φ72 Fig. 2 4,000min Fig. 4 Fig. 6 4,000min F12 FA20 FT6 78 59 59 62 4,000 min 5,000min 4,000min 29 29 φ=2.5 13 φ=5.8 20 φ=3 12 58 Fig. 3

More information

Tension / Compression tap chucks for tapping cycles that are not synchronized

Tension / Compression tap chucks for tapping cycles that are not synchronized Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,

More information

HSK F80 MAKINO S HRINK FIT C H UCK S

HSK F80 MAKINO S HRINK FIT C H UCK S Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4

More information

enduring. Drill Chucks NC-Tooling 2013/2014

enduring. Drill Chucks NC-Tooling 2013/2014 enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type

More information

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture

ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

CTA. CTH For high-speed. 6 taper. 16 taper. The optimum holder choices for a variety of applications. Ideal taper angle. Precision spring collet

CTA. CTH For high-speed. 6 taper. 16 taper. The optimum holder choices for a variety of applications. Ideal taper angle. Precision spring collet SK-T ing Systems for Turning Mill M/ OET OER ANGE EA OET OER Taper collet chuck The optimum holder choices for a variety of applications TA General Purpose coolant-through oolant- Through utter SUKIMA

More information

Radial Drilling And Milling Heads TYPE HAAS

Radial Drilling And Milling Heads TYPE HAAS Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106

More information

Taladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS

Taladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column

More information

KNT Type Keyless Drill Chucks FOR DRILL ONLY, NOT FOR END MILL OR TAP

KNT Type Keyless Drill Chucks FOR DRILL ONLY, NOT FOR END MILL OR TAP -Taster V- COE 219-001 Find your exact zero points in all three axes in seconds with the new distance measurin scale (raduated and analoue). 20 h 7 =12 With Standard Stylus %OFN VFOH IRU UGO GHÀHFWRQ HG

More information

Arbours for PSC Polygon Shank Tooling

Arbours for PSC Polygon Shank Tooling Arbours for Polygon Tooling CAT V-FLANGE to Taper CV 40 Designation L L1 kg SPECIAL CV40ADB--1.57 1.57.827.95 CV40ADB-50-1.97 50 1.97 1.22 1.00-69871 -AD Taper to Designation L L1 kg SPECIAL 40 69871-A40-50-1.18

More information

Other Toolholders. (SwissQuick Reductions) (Morse Tapers) (Automotive Shank)

Other Toolholders. (SwissQuick Reductions) (Morse Tapers) (Automotive Shank) Other Toolholders (SwissQuick Reductions) (Morse Tapers) (Automotive Shank).01 Features and Benefits ERM/ERM and ER/ERM.02 ERM/ERM and ER/ERM SwissQuick Collet Reductions.03 Features and Benefits ISO 20/ER.04

More information

Automatic Drilling and Tapping Units

Automatic Drilling and Tapping Units Automatic Drilling and Tapping Units Contents Page Automatic drilling and tapping units... 25 Dimension sketches... 23 Introduction More mechanization in your drilling operations Simple and cost effective,

More information

EXCISION Piccolo Magnetic Base Drill

EXCISION Piccolo Magnetic Base Drill 4.1 EXCISION Piccolo Magnetic Base Drill Core Drill Capacity: Up to 40mm Ø x 50mm Depth Extremely manoeuvrable & easy to carry. Only 10.6kg! Solid Brass Guides guarantees rigidity for increased cutter

More information

BT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2

BT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2 /ER MAS 3 Form A+AD D [mm] D [mm] 30/ER 6 x 0 H 30.6 69. 5 5. 5 FRW 5 30/ER 6 x H 30.65 5 7. 5 FWR 5 30/ER 5 x 0 H 3 0 3 6. 5. -- FWR 35 30/ER 5 x H 35 0 3 88. 5 -- FWR 35 30/ER 3 x 0 30.3 0 7. 3 30/ER

More information

Industrial Drill Chucks & Live Centers

Industrial Drill Chucks & Live Centers Since 1957 Industrial Drill Chucks & Live Centers 2 From our headquarters in the province of Barcelona, Spain, Llambrich Precision, S.L. has been designing and manufacturing drill chucks and machine tool

More information

Quick-change adapters, positive drive inch sizes

Quick-change adapters, positive drive inch sizes P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable

More information

DOOSAN LIVE & STATIC TOOLING

DOOSAN LIVE & STATIC TOOLING DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800

More information

SHRINK FIT CHUCKS CAT BT HSK CAPTO.

SHRINK FIT CHUCKS CAT BT HSK CAPTO. SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink

More information

CnC woodworking Collets

CnC woodworking Collets CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ

More information

BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group

BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40

More information

BMT LIVE & STATIC TOOLING

BMT LIVE & STATIC TOOLING BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

HIGH TORQUE LIVE TOOLS

HIGH TORQUE LIVE TOOLS HIGH TORQUE LIVE TOOLS Mori Seiki NLX 4000 High Torque Live Tools Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com

More information

/1505-I-20 TOO L HO L DERS 2015 GM 300

/1505-I-20 TOO L HO L DERS 2015 GM 300 TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY

More information

Designed for Automatic Tool Change Machines

Designed for Automatic Tool Change Machines TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and

More information

31 avenue des lacs SCIONZIER Tel : Fax :

31 avenue des lacs SCIONZIER Tel : Fax : 84 STANDARD PRORAMME High Performance Holder 31 avenue des lacs 74950 SCIONZIER Tel : 04 50 18 030 27 Fax : 04 50 18 30 28 md@mecadiffusion.net www.mecadiffusion.com STANDARD PRORAMME High Performance

More information

NAKAMURA TOME LIVE TOOLING

NAKAMURA TOME LIVE TOOLING NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000

More information

PRODUCT CATALOGUE 2015

PRODUCT CATALOGUE 2015 PRODUCT CATALOGUE 2015 INTRODUCTION Terms and conditions WE HAVE THE KNOWLEDGE, THE EXPERIENCE AND THE SOLUTIONS! SPV Spintec aims to be your complete supplier and partner when it comes to processing in

More information

BT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95.

BT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95. BT Shank Tools BT30.................................................................................E2 E18 BT40................................................................................E20 E60 BT50................................................................................E62

More information

Techleader Clearance Items Qty. Order No. Description Price

Techleader Clearance Items Qty. Order No. Description Price Techleader Clearance Items Qty. Order No. Description Price Collets 16C 4 160-056-SE 16C 7/8" Round Serrated Collet $40.95ea 2 160-004 16C 1/16" Round Smooth Collet $34.50ea KATO TC TAP COLLETS 1 810-101

More information

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420) HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16

More information

> MADE IN GERMANY. Powerful solutions passionate people. Range of Tools. Drilling machines

> MADE IN GERMANY. Powerful solutions passionate people. Range of Tools. Drilling machines > MADE IN GERMANY Powerful solutions passionate people Range of Tools Drilling machines KF Range of tools drilling machine KF Productivity and quality are always results of optimally coordinated machines

More information

BORING SYSTEMS INFO. 3 nd edition

BORING SYSTEMS INFO. 3 nd edition BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll

More information

ANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life

ANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and

More information

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6 NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules

More information

We set the standard for the highest precision and most advanced technology in the machine tool accessory market

We set the standard for the highest precision and most advanced technology in the machine tool accessory market ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100

More information

Cutting Tool. NEW SUPER DRILL (Standard Head Type) BLADE (For Standard Head) NEW SUPER DRILL SET (Flat Head Type) BLADE (For Flat Head)

Cutting Tool. NEW SUPER DRILL (Standard Head Type) BLADE (For Standard Head) NEW SUPER DRILL SET (Flat Head Type) BLADE (For Flat Head) 1,166 167 168,169 170 170 173 173 174 174 174 NEW SUPER DRILL (Standard Head Type) BLADE (For Standard Head) NEW SUPER DRILL SET (Flat Head Type) BLADE (For Flat Head) EXTENTION ARBOR (For Standard Head)

More information

Driven Toolholders for HAAS Machines

Driven Toolholders for HAAS Machines riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool

More information

Performance requires quality.

Performance requires quality. 131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

More information

STANDARD PROGRAMME Hydraulic Chucks

STANDARD PROGRAMME Hydraulic Chucks 20 STANDARD PRORAMME STANDARD PRORAMME 23 Hydraulic Chuck ISO 7388-1, Form AD (prev. DIN 69871-AD), extra short design d 1 d 2 d 3 l3 ISO 7388-1 Form AD 3 µm h6 2.5 25000 min Nominal size SK/ISO Dimensions

More information

Components for Machine Building. Power Feed Units

Components for Machine Building. Power Feed Units Components for Machine Building Power Feed Units Standard and Custom Components to Fit Your Needs Exactly If you re building equipment to drill, tap, chamfer or thread, Hause Machines can help you create

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your

More information

Vol. 2 HY-PRO SHRINK

Vol. 2 HY-PRO SHRINK Vol. 2 HY-PRO SHRINK Face-Mill Cutter for Small Machines Tool Insertion Heating: Heat the holder with hot air for about 3 minutes. Attachment: Insert tool into the hole, which has been expanded by the

More information

Clamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3

Clamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3 equipment rill chucks Reducing bushes Centre points Front-face carrier From page 40-3 and-operated chuck Power chuck Collet chuck ydraulic cylinder From page 40-17 Jaws Slot nuts From page 40-34 ssembly

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

SERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling

SERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012

More information

WINNER! ALBRECHT. Precision Chucks

WINNER! ALBRECHT. Precision Chucks WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate

More information

Model Travel CV-7A CVM-7A CV-7B CVM-7B CV-9A CVM-9A CV-9B CVM-9B CV-11A CVM-11A X-axis (left and right) mm Y-axis (back and

Model Travel CV-7A CVM-7A CV-7B CVM-7B CV-9A CVM-9A CV-9B CVM-9B CV-11A CVM-11A X-axis (left and right) mm Y-axis (back and Model Travel CV-7A CVM-7A CV-7B CVM-7B CV-9A CVM-9A CV-9B CVM-9B CV-11A CVM-11A X-axis (left and right) 760 760 900 900 1100 1100 Y-axis (back and front) 520 520 600 600 600 600 Z-axis (up and down) 480

More information

Accessories. Other Accessories

Accessories. Other Accessories .01 Wrenches.03 Wrench Heads.04 Torque Wrenches.05 Features and Benefits of Counter Nut.05 CM/ER Counter Nut.06 Trays for Collet Sets.06 Trays for Sealing Disk Sets.07 Clamping Units PGU/PGC Other.09 WMB

More information

RESIN FIBER DISC PADS

RESIN FIBER DISC PADS RESIN FIBER DISC PADS SMOOTH FACE RFD PADS These pads are made from proprietary thermoplastic rubber compounds that provides consistent properties over a wide range of temperatures. They are ideal pads

More information

VP-1100/1500 Vertical Machining Center

VP-1100/1500 Vertical Machining Center VP-Series VP-10/1500 Vertical Machining Center http://www.twinhorn.com.tw RIGID CONSTRUCTION INNOVATIVE DESIGN SUPERIOR PRODUCTIVITY All major parts are built with high tensile Meehanite cast iron, featuring

More information

Tooling and Workholding Catalogue

Tooling and Workholding Catalogue Tooling and Workholding Catalogue Founded by our present managing director in 1981 we are now known as one of the most progressive machine tool and workholding companies in the UK. At YMT we understand

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

Introduction 3. Motorized Milling, Drilling and Tapping Spindles 5. Motorized Grinding Spindles 6. Motorized Air Bearing Spindles 8

Introduction 3. Motorized Milling, Drilling and Tapping Spindles 5. Motorized Grinding Spindles 6. Motorized Air Bearing Spindles 8 High Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Contents Introduction 3 Motorized Milling,

More information

Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation

Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information

Tradition in Perfection.

Tradition in Perfection. Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded

More information

STANDARD PROGRAMME Shrink Chucks

STANDARD PROGRAMME Shrink Chucks 116 STANDARD PRORAMME Shrink Chucks 122 STANDARD PRORAMME Shrink Chucks Shrink Chuck ISO 7388-1, Form AD/AF (prev. DIN 69871-AD/B), narrow design, ISO 7388-1 Form AD/AF 2.5 SK/ISO Dimensions sw Weight

More information

BARON-MAX VL Range Vertical Machining Centers

BARON-MAX VL Range Vertical Machining Centers BARON-MAX VL Range Vertical Machining Centers Linear Guide ways VL Range Higher Efficiency, Rigid Structure, Excellent and Stable Accuracy At a Very Affordable Pricing Cost Effective, High Performance

More information

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form

More information

HLX5 Drifter Parts.

HLX5 Drifter Parts. HLX5 Drifter Parts TAMROCK HLX5 550 467 92 HYDRAULIC ROCK DRILL HLX 5 1 HLX5 152 749 48 FLUSHING DEVICE ASSEMBLY 1 SEP. PART LIST, INCL. PART 39 2 HLX5 550 466 28 GEARBOX 1 SEP. PART LIST 8 HLX5 550 577

More information

SLUGGER CUTTERS Airforce 35. Airforce 45

SLUGGER CUTTERS Airforce 35. Airforce 45 Airforce 35 A compact pneumatic drill ideally suited to space restricted and hazardous environments such as oil drilling platforms, mining industry, shipbuilding or petrochemical industry. Combining a

More information

PRECI-FLEX. The Flexible Tool System

PRECI-FLEX. The Flexible Tool System PRECI-FLEX The Flexible Tool System EXSYS Tool, Inc. T:800.397.9748 F:800.397.9739 P:352.588.4345 www.mazaktooling.com CONTACT INFORMATION TABLE OF CONTENTS Main Distribution for USA Mexico Canada Repair

More information

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm

DRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are

More information

Modular Spindle Technology. Productivity Solutions.

Modular Spindle Technology. Productivity Solutions. Modular Spindle Technology Productivity Solutions www.kuvamtechnologies.com Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team

More information

MSeries. High Rigidity Vertical Machining Centers

MSeries. High Rigidity Vertical Machining Centers MSeries High Rigidity Vertical Machining Centers M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.

More information

Alberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30

Alberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30 350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &

More information

HURCO VDI40 TOOLING FOR HURCO

HURCO VDI40 TOOLING FOR HURCO HURCO VDI40 TOOLING FOR HURCO Tae of Contents Quick Change Tooing Page 4 LinA Broach Page 5 Axia Page 6-8 Raia Page 7-9 Ajustae Ange Page 9 Static Toos Page 10-18 Accessories Page 19-21 2 Mouar esign for

More information

G0616 Column & Base Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P06160001 CAP SCREW M8-1.25 X 140 49 P06160049 SPLINED SHAFT 2 P06160002 REAR ACCESS PANEL 50 PK79M KEY 10 X 8 X 55 3 PVA58

More information