PRECI-FLEX. The Flexible Tool System
|
|
|
- Ernest Collin Harrell
- 6 years ago
- Views:
Transcription
1 PRECI-FLEX The Flexible Tool System EXSYS Tool, Inc. T: F: P:
2 CONTACT INFORMATION TABLE OF CONTENTS Main Distribution for USA Mexico Canada Repair and Maintenance Service Preventative Maintenance Program EXSYS Tool, Inc. & EXSYS Tool Repair, LLC Corporate Lake Blvd. San Antonio, FL Toll Free: (800) Toll Free Fax: (800) Phone: (352) Fax: (352) Web: Live Tooling Cybertech Turn 4500 (M) Hyper Quadrex 100 / 150 (MSY) MP Pg. 1 QTN 300 / 350 / 400 / 450 SQT 28 / 30 / 300 Hyper Quadrex 200 (MSY) MP 620 / Stat...Pg. 3 QTS 300 (M) QTS 100 / 200 / 250 (M)...Pg. 5 Nexus QTN 200 / 250 (M,MS) SQT 15 / 18 / (M,MS)...Pg. 6 Static Tooling Hyper Quadrex 100 / 150 (MSY) MP Pg. 2 Hyper Quadrex 200 (MSY) MP 620 / Stat...Pg. 4 Nexus QTN 200 / 250 (M,MS) SQT 15 / 18 / (M,MS)...Pg. 7-8 QTN 300 / 350 / 400 / 450 SQT 28 / 30 / Pg. 9
3 Cybertech Turn 4500 (M) Cat N/A 1:1 max. = 4,000 1/min Max. = 100 Nm input=output: Yes Cat N/A 1:1 max. = 4,000 1/min Max. = 100 Nm input=output: Yes Hyper Quadrex 100 / 150 (MSY) MP 6100 ER 20 Collet N/A 1:1 max. = 6,000 1/min Max. = 13 Nm input=output: No :1 max. = 6,000 1/min Max. = 70 Nm input=output: No :1 max. = 6,000 1/min Max. = 70 Nm input=output: No Gear Hobber Part Number i=1,97:1 In = 6,000 1/min Out = 3,000 1/min Max. = 50 Nm input=output: Yes 1 EXSYS Tool, Inc. T: F: P:
4 Static Tooling Hyper Quadrex 100 / 150 (MSY) MP 6100 Part Number (External Coolant) Turning Toolholder Right Hand and Left Hand 3/4 Part Number (External Coolant) Multi Purpose OD/ID Holder; 3/4 Square Shank Holder Part Number (External Coolant) Facing Holder for 1 Tool; Right and Left Hand Direction Part Number (External Coolant) Infeed / Cut-off tool holder; 32mm Square Shank; Right Hand Boring Bar Holders 1 1 1/4 1 1/2 Part Number (External Coolant) Part Number (External Coolant) Part Number (External Coolant) I.D. Boring Bar Holder Combi Holder for Internal and External Coolant 2 EXSYS Tool, Inc. T: F: P:
5 QTN 300 / 350 / 400 / 450 SQT 28 / 30 / :1 max. = 4,000 1/min Max. = 150 Nm input=output: No :1 max. = 4,000 1/min Max. = 150 Nm input=output: No :1 max. = 4,000 1/min Max. = 150 Nm input=output: No :1 max. = 4,000 1/min Max. = 150 Nm input=output: No Hyper Quadrex 200 (MSY) MP 620 / Stat :1 max. = 6,000 1/min Max. = 70 Nm input=output: No :1 max. = 6,000 1/min Max. = 70 Nm input=output: No EXSYS Tool, Inc. T: F: P:
6 Static Tooling Hyper Quadrex 200 (MSY) MP 620 / Stat Part Number (External Coolant) Turning Toolholder Right Hand and Left Hand 1 Part Number (External Coolant) Multi Purpose OD/ID Holder; 1 Square Shank Holder Part Number (External Coolant) Facing Holder for 1 Tool; Right and Left Hand Direction Part Number (External Coolant) Infeed / Cut-off tool holder; 32mm Square Shank; Right Hand Boring Bar Holders 1 1 1/4 1 1/2 Part Number (External Coolant) Part Number (External Coolant) Part Number (External Coolant) I.D. Boring Bar Holder Combi Holder for Internal and External Coolant 4 EXSYS Tool, Inc. T: F: P:
7 QTS 300 (M) :1 max. = 6,000 1/min Max. = 100 Nm input=output: Yes :1 max. = 6,000 1/min Max. = 100 Nm input=output: No ER 20 Collet N/A 1:1 max. = 6,000 1/min Max. = 13 Nm input=output: No QTS 100 / 200 / 250 (M) :1 max. = 6,000 1/min Max. = 70 Nm input=output: Yes :1 max. = 6,000 1/min Max. = 70 Nm input=output: No ER 20 Collet N/A 1:1 max. = 6,000 1/min Max. = 13 Nm input=output: No EXSYS Tool, Inc. T: F: P:
8 Nexus QTN 200 / 250 (M,MS) SQT 15 / 18 / (M,MS) Gear Hobber Part Number i=2:1 In = 6,000 1/min Out = 3,000 1/min Max. = 45 Nm input=output: Yes N/A 1:1 max. = 6,000 1/min Max. = 70 Nm input=output: No N/A 1:1 max. = 6,000 1/min Max. = 70 Nm input=output: No ER 20 Collet N/A 1:1 max. = 6,000 1/min Max. = 13 Nm input=output: No N/A 1:1 max. = 6,000 1/min Max. = 70 Nm input=output: No N/A 1:1 max. = 6,000 1/min Max. = 70 Nm input=output: No ER 25 Collet N/A 1:1 max. = 6,000 1/min Max. = 20 Nm input=output: No N/A 1:1 max. = 5,000 1/min Max. = 70 Nm input=output: Yes 6 EXSYS Tool, Inc. T: F: P:
9 Static Tooling Nexus QTN 200 / 250 (M,MS) SQT 15 / 18 / (M,MS) Part Number (External Coolant) Tool holder, radial, right hand rectangular transverse, external coolant supply. Part Number (External Coolant) Boring bar holder, radial, left hand - right hand cylindrical chuck, external and central coolant supply. Part Number (External Coolant) Tool holder, axial, right hand offset rectangular transverse, external coolant supply. Part Number (External Coolant) Tool holder, radial, right hand rectangular transverse, external coolant supply. Part Number (External Coolant) Tool holder, axial, multiple rectangular transverse 25,4 (1 ), external coolant supply. Part Number (External Coolant) Tool holder, axial, multiple rectangular transverse 25,4 (1 ), external coolant supply. Part Number (External Coolant) Boring bar holser, radial, left hand - right hand, multiple cylindrical chuck (1 1/2 ) external coolant supply. EXSYS Tool, Inc. T: F: P:
10 Static Tooling Nexus QTN 200 / 250 (M,MS) SQT 15 / 18 / (M,MS) Part Number (External Coolant) Turning Toolholder Right Hand and Left Hand 1 Part Number (External Coolant) Multi Purpose OD/ID Holder; 1 Square Shank Holder Part Number (External Coolant) Facing Holder for 1 Tool; Right and Left Hand Direction Part Number (External Coolant) Infeed / Cut-off tool holder; 32mm Square Shank; Right Hand Boring Bar Holders 1 1 1/4 1 1/2 Part Number (External Coolant) Part Number (External Coolant) Part Number (External Coolant) I.D. Boring Bar Holder Combi Holder for Internal and External Coolant 8 EXSYS Tool, Inc. T: F: P:
11 Static Tooling QTN 300 / 350 / 400 / 450 SQT 28 / 30 / 300 Part Number (External Coolant) Tool holder, Axial Multiple Rectangular Transverse 31,75 (1 1/4 ), External Coolant Supply Part Number (External Coolant) Boring bar holder, radial, left hand - right hand, multiple cylindrical chuck Ø38,1 (1 1/2 ), external and central coolant supply Part Number (External Coolant) Tool holder, axial multiple rectangular transverse 25,4 (1 ), external coolant supply Part Number (External Coolant) Turning Toolholder Right Hand and Left Hand 1 Part Number (External Coolant) Multi Purpose OD/ID Holder; 1 Square Shank Holder Part Number (External Coolant) Facing holder for 1 tool; Right and Left hand direction Part Number (External Coolant) Infeed / Cut-off tool holder; 32mm Square Shank; Right Hand Boring Bar Holders 1 1/2 2 Part Number (External Coolant) Part Number (External Coolant) I.D. Boring Bar Holder Combi Holder for Internal and External Coolant EXSYS Tool, Inc. T: F: P:
PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
Driven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
April 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
August 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the
July 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest
October 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
April 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe
July 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
July 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest
Radial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
July 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
Designed for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
BMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
DRIVEN and STATIC TOOLING For MURATEC
10139 BERGIN RD. HOWELL, MI 48843 PHONE : 8-91-TOOLS ( 810-63-4446 ) FAX: 8-9-TOOLS ( 810-63-446 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com DRIVEN and STATIC TOOLING For MURATEC Live Tooling
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
ANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
DRIVEN and STATIC TOOLING For EMAG
1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877-91-TOOLS ( 810-6-4446 ) FAX: 877-9-TOOLS ( 810-6-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com DRIVEN and STATIC TOOLING For EMAG Live Tooling
DRIVEN and STATIC TOOLING For DOOSAN BMT45
DRIVEN and STATIC TOOLING For DOOSAN BMT45 039 BERGIN RD. HOWELL, MI 48843 PHONE : 877-9-TOOLS ( 80-632-4446 ) FAX: 877-92-TOOLS ( 80-632-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com June
Item no. Initial size D1
Efficient production of bores accurate in dimensions and design on single-spindle and multi-spindle machines. RÖHM designed special floating chucks for reamers with internal coolant supply. The tool locating
DOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
NAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
BMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG
Nakamura-Tome TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG 1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877 91 TOOLS ( 810 62 4446 ) FAX: 877 92 TOOLS ( 810 62 4467 ) EMAIL: info@mdtooling.com
Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
BEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
HIGH TORQUE LIVE TOOLS
HIGH TORQUE LIVE TOOLS Mori Seiki NLX 4000 High Torque Live Tools Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com
HSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
BEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
Tooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
Contents. Milling. Solid end mills
UPDATE 2016-2 SOLUTIONS & SUPPORT By choosing Seco, you get more than just a comprehensive portfolio of advanced metal-cutting solutions and expert services. You get a partnership based on trust, respect
powrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
GTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses
nanoflex Designed for Swiss Type Lathes The new quick change system with very compact design and very high precision.
The new quick change system with very compact design and very high precision. Minimal investment, maximal expandability. Designed for Swiss Type Lathes The perfect combination: ER collet chuck and modular
QuickFlex. Adapter Program. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
QuickFlex The new quick change system for high performance and precision. Minimal investment, maximal expandability. Adapter Program QuickFlex Minimal investment, maximal expandability. Minimal investment
CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
GTS SERIES. Twin Spindles & Turrets CNC Turning Centers
GTS SERIES Twin Spindles & Turrets CNC Turning Centers GTS series GTS series Twin Turrets TWIN SPINDLES & TURRETS CNC TURNING CENTER General Features Accessories & Applications Designed for simultaneous
BU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
Clamping technology. MAPAL Floating holder. for multi-bladed high performance reamers NEW
Clamping technology MAPAL Floating holder for multi-bladed high performance reamers NEW 2 Floating holder for MAPAL multi-cutting reamers When using reamers on lathes it is often necessary to compensate
ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
Clamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
Worm gear. Worm Gears. Description. Special features. Customer specific
Worm gear Worm Gears 2010 Description Worm gear for universal applications Center distance 20 mm Compact design Outer dimensions 60x60x35 mm 7 ratios of 13:1 to 65:1 Aluminium housing, anodized Maintenance-free
Quick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
Taper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
Alberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA
55 21.65 1 47 c te ca Me 40 77 LIVE DOOSAN 12 80 54 N 9b DI 8/ O 0x1 CC x3 TA 0.8 AT 6x 16 W1 67 55 18 4 11 7 MACHINE AMERICA 20 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com
Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
Type2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
Product range overview of Walter Thread System / Walter Capto TM
A 276 Product range overview o Walter Thread System / Walter Capto TM Threading External machining Internal machining Walter NTS Walter Capto TM Walter NTS Walter Capto TM NTS SE NTS I h = 12 40 Page A
Driven Toolholders for HAAS Machines
riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool
Collet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
PENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
Auction Catalog. Auction Date:
Auction Catalog Satowfi Machining Solutions LLC. Auction Date: Thursday, July 26, 2018 Lots Start Closing: 10:00 AM MST KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale, AZ 85260 Phone: (480) 455-3910
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret.
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret www.benztooling.com March 2015 Table of Contents Live Tools ST 10 (Y) ST 20 (Y) ST25 (Y) ST 30 (Y) ST 35 (Y) DS 30 (Y) ST 20 SS (Y) ST 30 SS (Y) DS
systems Features Technical Data Spindle Motor Frequency Converter FC 1500-CT Dimensions CNC Base Machines E23 CNC Base Machines SYSTEMS Accessory
Accessory MAV 2.075 S Features Robust two-pole AC motor (asynchronous motor) Rectangular design, protection class IP54, isolation class F Casting bearing plate on A-side Aluminium diecasting B-side Special
DIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
Accessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
U-CENTER. NC heads for facing, boring, threading and radiusing for machining centres
U-CENTER NC heads for facing, boring, threading and radiusing for machining centres 8 U-CENTER General features o + 4 1 A U-CENTER U-CENTER boring and facing heads are designed for use on machines with
FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
We set the standard for the highest precision and most advanced technology in the machine tool accessory market
ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100
MULTITURRET BAR TURNING B436Y2
MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model
ER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
HSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
Techleader Clearance Items Qty. Order No. Description Price
Techleader Clearance Items Qty. Order No. Description Price Collets 16C 4 160-056-SE 16C 7/8" Round Serrated Collet $40.95ea 2 160-004 16C 1/16" Round Smooth Collet $34.50ea KATO TC TAP COLLETS 1 810-101
BEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
powrgrip System The ambitious toolholding system Product catalog
powrgrip System The ambitious toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Product offering 04 Discover powrgrip 06 Automatic clamping unit PGU 07
HES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
Swiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
Jet Machine & Manufacturing Equipment List
Jet Machine & Manufacturing Equipment List 6-Axis Horizontal Model X/Y/Z Travel Table Size Spindle Speed (Taper) SHW Unispeed 6 5-Axis Vertical 1 118"x51"x51" 63"x118" 6,000 RPM 2 118"x51"x51" 63"x118"
Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
GMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
Features Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number.
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 00/ISO 400. Marking Type and part number. Traceability Lot number marking on all products for traceability through the
CAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
Shrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
Spindle & Taper Care Products
Spindle & Taper Care Products Swiss Precision Tools UltraSonic Cleaner Ultrasonic Cleaner Ultrasonic Cleaning Solution US-40SE US-815CLEAN Heavy duty stainless steel double-wall design provides highly
ASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211
Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation. Figure l
Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation Major Components Figure l Basic Operation: High pressure coolant enters the Titespot Angle Head and drives an integral
Taladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS
RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column
GTX Multi-tasking Turning Centers SERIES
GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
COMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
CALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
EVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
Stub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
I.T MDT * series 20 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 5480 / 5482 COUPLING TECHNICAL INFORMATION ISSUED
series 2 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 548 / 5482 COUPLING TECHNICAL INFORMATION I.T. 6486 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED
BNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA
BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,
ANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
GTZ-2000 SERIES. Multi-tasking Turning Centers
GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
BT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2
![BT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2](/thumbs/81/83180685.jpg "BT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2")
/ER MAS 3 Form A+AD D [mm] D [mm] 30/ER 6 x 0 H 30.6 69. 5 5. 5 FRW 5 30/ER 6 x H 30.65 5 7. 5 FWR 5 30/ER 5 x 0 H 3 0 3 6. 5. -- FWR 35 30/ER 5 x H 35 0 3 88. 5 -- FWR 35 30/ER 3 x 0 30.3 0 7. 3 30/ER
ER System The pioneering toolholding system. Product catalog
ER System The pioneering toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Three systems one brand 4 Wet and dry machining 6 Special solutions: recool
I.T ODT-N * series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION ISSUED
series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION I.T. 6482 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 06-09
GTZ SERIES. Multi-tasking Turning Centers
GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements
CnC woodworking Collets
CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ