nanoflex Designed for Swiss Type Lathes The new quick change system with very compact design and very high precision.
|
|
|
- Cynthia Kelly
- 5 years ago
- Views:
Transcription
1 The new quick change system with very compact design and very high precision. Minimal investment, maximal expandability. Designed for Swiss Type Lathes
2 The perfect combination: ER collet chuck and modular quick change system in one toolholder nanoflex chuck ready for adapter clamping Toolholder nanoflex chuck ER collet Collet nut Screw to plug clamping screw hole Drive ring for torque transmission of the nanoflex quick change adapter nanoflex clamping screw nanoflex quick change adapter One-hand wrench with set torque value to clamp and unclamp the nanoflex quick change adapters Drive dogs for torque transmission Axial contact surface for high stiffness of the nanoflex adapter Taper for ER collets and nanoflex adapter
3 Plug screw Clamping screw With ER collet With nanoflex collet chuck adapter Regular tool clamping using collets. Quick change using nanoflex adapter. 3
4 Handling using adapters Preparation Adapter clamp and unclamp Handling using collets Preparation Collet clamp and unclamp 4
5 Cylindrical shank holder with cylindrical shank and flat. For flexible use of ER collets and nanoflex adapters in boring bar and sleeve holders. Size Item No. D F d min. d max. L1 L2 L3 m b ER-16NF N G1/ 8 " N N Collet chuck adapter DIN 6499, ISO Size Item No. F 1 d 1 min. d 1 max. d 2 F2 L2 L1 Nm Collet size ER-16NF N ER Drive ring for use with nanoflex adapters, clamping screw included Size Item No. D d m ER-16NF N M5x N N 5
6 Preset master adapter etched with actual gauge length measurement Size Item No. F 1 F 2 L1 ER-16NF N Master gauge Size Item No. F 1 F 2 L1 ER-16NF N Mounting device nanoflex for easy tool change of nanoflex adapters on the work bench Size Item No. D F L ER-16NF N N N N 6
7 Torque screwdriver to clamp the nanoflex adapter with one hand Size Item No. Nm Note: Replacable blade. ER-16NF N 10IP Collet nut ERNF suitable for nanoflex spindle collet chuck DIN 6499, ISO Size Item No. M recommended torque Nm ER-16NF N M 24 x Clamping screw ERNF to clamp the nanoflex adapters Plug screw ERNF to plug the clamping screw hole Size Item No. Nm Size Item No. Nm ER-16NF N 10IP N ER-16NF N 10IP N 7
8 WTO worldwide USA WTO Inc. Germany WTO GmbH China WTO Asia WTO GmbH Auf der oberen Au Ohlsbach Germany WTO USA S Lakes Dr Ste F Charlotte NC USA WTO Asia Room , Building 2 No. 228 Banting Road Jiuting Town, Songjiang District Shanghai China Our distribution partners. Competence right there. Australia Dimac Tooling Ltd. sales@dimac.com.au Finland Suomen Terätuonti Oy myynti@stt.as Korea WTO Office Korea is.chon@wto-korea.com Slowakia ALBA precision s.r.o. albaprecision@albaprecision.sk Belarus JSC PMI Engineering tool@pmi.by France Philippe Tagliafero pta@wto.de Mexico Workholding Engineering De México info@wem.com.mx Spain ITALMATIC, S.A. italmatic@italmatic.es Brazil TF2 tfdois@tfdois.com.br Great Britain Cutwel Ltd. sales@cutwel.net Netherlands Klein Tooling B.V. verkoop@kleintooling.nl Sweden Komet Scandinavia AB scandinavia@kometgroup.com Canada Mittmann Industrial Inc. info@mittmann.com India A.H. Rao ahr.rao@gmail.com Norway Helge Karlsen Verktøy og Maskin AS hkvm@hkvm.no Switzerland Utilis AG info@utilis.com China Shanghai Gangde wtocando@aliyun.com Israel E.Y.A.R. Ltd. yehoshua@eyar.co.il Poland ARCO Andrzej Rudenko info@arcotools.pl Taiwan Kaiko Co., Ltd. info@kaiko.com.tw Czech Republic ALBA precision, spol. s.r.o. info@albaprecision.cz Italy Prymark srl commerciale@prymark.it Romania SC Elif Trading SRL bulent.ozkan@eliftrading.com Turkey MYK CNC MAKINA SAN. VE huseyin.tatlidil@mykcnc.com.tr Denmark Tool-part cj@tool-part.dk Japan NK Works Co. Ltd. k_samba@nk-works.co.jp Russia WTO Office Russia office@wto-russia.com Ukraine LLC SPA Stankopromimport info@phoenix-ua.com 09 I 2017 en
QuickFlex. Adapter Program. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
QuickFlex The new quick change system for high performance and precision. Minimal investment, maximal expandability. Adapter Program QuickFlex Minimal investment, maximal expandability. Minimal investment
Blade Holders. with high pressure internal coolant supply for parting and grooving.
Blade Holders with high pressure internal coolant supply for parting and grooving. Blade Holders with high pressure internal For VDI radial tooling turret VDI double serration for higher flexibility Valve
Thread Whirling Unit. High Productive Thread Whirling with patented quick change system for significant reduction of tool set-up time.
Thread Whirling Unit High Productive Thread Whirling with patented quick change system for significant reduction of tool set-up time. Suitable insert holders available from leading cutting tool manufacturers.
Broaching Unit. The new state of the art broaching unit for economic manufacturing of oriented keyways and splines. This investment pays.
Broaching Unit The new state of the art broaching unit for economic manufacturing of oriented keyways and splines. This investment pays. In operation: Broaching Unit Broaching Unit for ID and OD Working
Gear Hobbing Unit. High Productive Manufacturing of Gears with CNC Turning Centers. Maximum flexibility, high quality, optimal handling.
Gear Hobbing Unit High Productive Manufacturing of Gears with CNC Turning Centers. Maximum flexibility, high quality, optimal handling. In operation: Gear Hobbing Unit Gear Hobbing Unit for Turn/Mill Centers
QuickFlex. Designed for. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
The new quick change system for high performance an precision. Minimal investment, maximal expanability. for MAZAK Quick Turn Smart 200M/300M/350M Designe for 1 The perfect combination: ER collet chuck
DOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
NI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
Single-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
BP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
Infographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area
1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315
Rectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
Installation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
Land Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2
TURNING CENTERS by MACHINING CENTERS by YAMA SEIKI USA belongs to the GMT (GOODWAY Machine Tools) Group, which includes well-known machine tool manufacturers, GOODWAY, AWEA and EXTRON. The GMT Group has
Roll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
Fork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
Total credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
PREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
EMS215ic, EMP215ic, EM215ic
EMS215ic, EMP215ic, EM215ic Spare parts list 0463 412 001 GB 20170126 Valid for: serial no. 552, 615-xxx-xxxx Ordering number Product Notes 0558 102 239 EMS 215ic Bobbin Ø4-8" (100-200 mm). CSA/Bayonet
Production of heat by type Terajoules
Production of heat by type Table Notes geo represents heat used directly for district heating, agriculture etc. without a commercial transaction taking place. Please refer to the Definitions Section on
Spain s imports by oil product group and country of origin
Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es September 12 th 2018 Spain s imports by oil product
Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
Drive solutions for the oil and gas industry.
Drive solutions for the oil and gas industry. maxon Heavy Duty drives: Robust design for extreme operating conditions. Founded in Switzerland. Available worldwide. maxon a strong global brand. maxon motor,
No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
Mechatronic brake system INTORQ Control
Mechatronic brake system INTORQ Control for industrial trucks, escalators and cranes setting the standard The mechatronic brake system = INTORQ Control + INTORQ BFK458 spring-applied brake Spring-applied
Wobble Sticks Precise Manual Sample Transfer
Wobble Sticks Precise Manual Sample Transfer The UHV Design wobble stick range offers ultimate versatility for your bespoke applications. Our slimline modular concept benefits from UHV Design s cutting-edge
replacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
The new STx chain hoist NEW. Sophisticated technology prepared for the future
The new STx chain hoist 03.2018 NEW Sophisticated technology prepared for the future The new STx chain hoist Sophisticated technology prepared for the future Our experts have undertaken to keep reviewing
Fork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
Ceram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it.
2 Features Valve options Accessories Ceram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it. The secret s a ceramic seal. Inside the valve a pair
Global Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
CrimpTest-1 kn. Calibration Bracket
CrimpTest-1 kn Calibration Bracket 431-471-02 May 2017 CrimpTest-1 kn Calibration Bracket Manual This manual describes the operation of the calibration test rig part no. 432-671, for the purpose of checking
PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and roust. TRIAC AT features Suitale for the work site Closed loop controlled temperature Open loop controlled air volume Intelligent «e-drive» operating unit
INSTALLATION GUIDE NI WSN-3291 Outdoor IP Enclosure For NI WSN-32xx Series Devices
INSTALLATION GUIDE NI WSN-3291 Outdoor IP Enclosure For NI WSN-32xx Series Devices This installation guide describes how to install and use the National Instruments WSN-3291 outdoor IP enclosure. The NI
Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A
Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A February 28, 2018 Dr. Ed Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com
Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators
Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU is used to charge accumulators with nitrogen or to check
Production of heat by type Terajoules
Production of heat by type Table Notes geo represents heat used directly for district heating, agriculture etc. without a commercial transaction taking place. represents heat used for the production of
5AX Rotary Table TAP
All Features of Product Line 5 Included NEW Swiss Rotary Table Technology A winner in terms of technology, space and price perfect for small and medium-sized machining centers TAP rotary tables 5.216 1
SBS-Control. Table of contents. Operating Instructions BKS24-9A. Operating Instructions
Operating Instructions BKS24-9A Operating Instructions BKS24-9A Table of contents Operating Instructions 1 Operating controls and indicators 2 2 Preparations for faultless commissioning and operating 3
1. General company data
Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. Description 1.1. Function The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen
INSTALLATION GUIDE NI 9921/9922 Outdoor IP Enclosure For NI WLS-9000 Series Devices
INSTALLATION GUIDE NI 99/99 Outdoor IP Enclosure For NI WLS-9000 Series Devices This guide describes how to install and use the National Instruments 99 and National Instruments 99 outdoor IP enclosures.
Product Overview INCH
INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment
THE WITTUR ANSWER TO THE MACHINE ROOMLESS MARKET REQUIREMENTS. MRL W Line. EMOTION IN MOTION
THE WITTUR ANSWER TO THE MACHINE ROOMLESS MARKET REQUIREMENTS EMOTION IN MOTION ADVANCED FEATURES THE WITTUR ANSWER TO THE CURRENT MRL MARKET REQUIREMENTS The, Wittur s new generation of machine roomless
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen
The new. Class ZURCON Z20 / Z22. New worldclass polyurethane materials. ZYour Partner for Sealing Technology
The new Class ZURCON Z20 / Z22 New worldclass polyurethane materials ZYour Partner for Sealing Technology Zurcon Polyurethane Materials for Hydraulic Seals and Scrapers Introduction Polyurethane seals
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
ESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC
6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial
Flying production. with travelling HF welding machines TDW & TDW-Mega. Built for you. Built to last. machines equipment expertise service
Flying production with travelling HF welding machines TDW & TDW-Mega Built for you. Built to last. machines equipment expertise service Top precision Travelling TDW & TDW-Mega More than 900 travelling
Global Valuation Summary - SAMPLE PAGES
- SAMPLE PAGES Regional Valuation Comparisons... 2... 4... 7... 9... 11 Developed Asia Pacific ex... 13 Developed Europe ex... 16 Advanced Emerging... 19 Appendix... 22 Disclaimer... 23 Global Market Valuations
Imports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports
USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy
Stafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
Over time consistency of PPP results in the OECD countries
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized International Comparison Program Over time consistency of PPP results in the OECD countries
SuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!
Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide
I. World trade in Overview
I. World trade in - Overview Table I.1 Growth in the volume of world merchandise exports and production, 2-5 (Annual percentage change) 2-5 23 24 World merchandise exports 4.5 5. 9.5 6. Agricultural products
D6.. Butterfly valves. For controlled operation.
D6.. Butterfly valves. For controlled operation. Water is our element. www.belimo.eu Total solutions for medium and large volumetric flows. Butterfly valves from Belimo are available as classical D6..N
Eberspächer Group. Company Presentation DRIVING THE MOBILITY OF TOMORROW
Eberspächer Group Company Presentation DRIVING THE MOBILITY OF TOMORROW DRIVING THE MOBILITY OF TOMORROW Eberspächer Page 2 History 1865 Master tinsmith Jakob Eberspächer founds a workshop, which soon
FORGED STAINLESS STEEL Rack And Pinion Actuator S Series
FORGED STAINLESS STEEL Rack And Pinion Actuator S Series The Air Torque S Series stainless steel actuators are a corrosion resistant rack and pinion actuator particularly engineered for corrosive environments
You ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
testing to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5kN 1kN 2.5kN Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710mm (67.3) 290mm (11.4) 414mm (16.3) 1359mm (53.5)
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder
FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder Robotics and Automation Machine tools Semiconductor technology Medical Packaging machines Special environments Our inspiration Your business
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 12
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-28 issue 12 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
testing to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359
-Shape the Future with Manufacturing Technology
-Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany
67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production
Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed
BOLL Automatic Filter TYPE The Compact Design Two-Chamber Filter. BOLL & KIRCH Filterbau GmbH
BOLL Automatic Filter TYPE 6.72 The Compact Design Two-Chamber Filter BOLL & KIRCH Filterbau GmbH THE TASK Perfect pre-treatment In order to ensure that large combustion engines or mechanical processing
Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021
Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report From 2001 to 2021 Global CV Markets Covered Industry Production Data Truck & Bus Model Production Forecast Engine Production
Lifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
UXC.COM A PUBLICATION OF. NPO Overview 1501 MACY DRIVE ROSWELL, GA PH FX
2019 A PUBLICATION OF UXC.COM NPO Overview 1501 MACY DRIVE ROSWELL, GA 30076 PH +1 770 642-7745 FX +1 770 643-2954 NOTICE UxC, LLC ( UxC ) shall have title to, ownership of, and all proprietary rights
Portable Compressors MOBILAIR M 122 With the world-renowned SIGMA PROFILE Free air delivery 11.1 m³/min
www.kaeser.com Portable Compressors MOBILAIR M 122 With the world-renowned SIGMA PROFILE Free air delivery 11.1 m³/min Worldwide sales and service network KAESER is one of the world s foremost compressor
Global Economic Briefing: Merchandise Trade
Global Economic Briefing: Merchandise Trade June 27, 18 Dr. Edward Yardeni 516-972-7683 eyardeni@ Debbie Johnson 48-664-1333 djohnson@ Mali Quintana 48-664-1333 aquintana@ Please visit our sites at www.
Mileage-based User Fees In Europe and USA
Mileage-based User Fees In Europe and USA Dr. Toshinori Nemoto Professor at Hitotsubashi University The 31th Japan Road Congress International symposium: Road-tolling policies and technologies October
Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5
Knife gate valve MP Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-11 issue 5 Knife gate valve MP Stafsjö s knife gate valve MP is a full bore
Spain s exports by oil product group and country of destination
Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es February 13 th 2017 Spain s exports by oil product
M O T O R V E H I C L E S T A T I S T l C S
M O T O R V E H I C L E S T A T I S T l C S of Japan 2017 JAPAN AUTOMOBILE MANUFACTURERS ASSOCIATlON, INC. C O N T E N T S Motor Vehicles in Use Cars, Trucks, Buses and Special Purpose Vehicles, 1945-2016
Photo courtesy of NZTA
international comparisons for road deaths Photo courtesy of NZTA 14 Motor Vehicle Crashes in New Zealand international comparisons for road deaths 141 Contents TABLES Table 1 International comparison of
DIAPHRAGM PRESSURE CYLINDERS
DIAPHRAGM PRESSURE CYLINDERS Diaphragm pressure cylinders EFFBE diaphragm pressure cylinders: sensitive and robust By using EFFBE diaphragm pressure cylinders, sensitive control pro - cesses can be realised
MODERNISATION SOLUTIONS. MRM W Line. TIME FOR A FACE-LIFT!
MODERNISATION SOLUTIONS TIME FOR A FACE-LIFT! ADVANCED FEATURES WITTUR SOLUTION FOR MODERNISATION The, Wittur flexible machine roomless electric lift, offers an ideal solution for new lifts in existing
NGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1.
Dual-Magnet Float Switch measuring monitoring analysing NGS Pressure: up to 5 bar O O Medium temperature: up to 50 C Density: > 0.7 kg/dm 3 High switch capacity O O Connection: square flange, DIN flange,
Our Most Important Connection is with You. NSX ARINC 600. Power and Performance NSX ARINC 600
Our Most Important Connection is with You. NSX ARINC 600 Power and Performance NSX ARINC 600 NSX (ARINC 600) Radiall s NSX Arinc 600 series has been used for more than 30 years to connect high performance
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 10 NOVEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
I. Global wine markets,
I. Global wine markets, 2007-09 Table 1: Summary of the world's wine markets, 2007-09 (annual average) Vine % of cropland Wine Wine Wine Wine Wine Per adult wine Pop- GDP GDP Area under vines produced
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 15 DECEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
exports of goods annual change (%)
12.0 Austria s foreign trade 2015 by world region imports of goods 2015 exports of goods 2015 region 1 1 share (%) share (%) Europe 106,984 80.4 104,032 79.1 EU 93,686 70.4 90,841 69.1 EFTA 8,020 6.0 8,098
exports of goods annual change (%)
12.0 Austria s foreign trade 2016 by world region imports of goods 2016 exports of goods 2016 region 1 1 share (%) share (%) Europe 110,067 81.2 104,271 79.5 EU 96,801 71.4 91,112 69.4 EFTA 7,718 5.7 8,132
TOP SMART intelligent position monitor:
TOP SMART intelligent position monitor: Air Torque also manufacture the Top smart intrinsically safe compact valve position monitor with integrated diagnostics, self calibrating limit switches, integrated
MODERNISATION SOLUTIONS. MRM W Line. T I M E T O M A X I M I Z E YO U R S P A C E!
MODERNISATION SOLUTIONS www.wittur.com T I M E T O M A X I M I Z E YO U R S P A C E! ADVANCED FEATURES WITTUR SOLUTION FOR MODERNISATION The, Wittur flexible machine roomless electric lift, offers an ideal
Urchin 7 cflag.ifas.ufl.edu Page 1 of 2 Standard View Export All Visits Permalink Geo Location Jul 1, 2015 - Jul 31, 2015 First Date 2015 Compare to Past Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec