CnC woodworking Collets
|
|
- Cory Parks
- 6 years ago
- Views:
Transcription
1 CnC woodworking Collets SE00- SE0- SE0 Nut SyoZ 0 FoR woodworking MAChIneS (RDo0) This collet used on.hp and HP dual end Perske motors Description Length Inside SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ 0 / Collet 0 / SE00- SYOZ 0 / Collet 0 / SE00-0mm SYOZ 0 mm Collet 0 mm SE00- SYOZ 0 / Collet 0 / SE00- SYOZ 0 / Collet 0 / SE00- SYOZ 0 / Collet 0 / SE00-mm SYOZ 0 mm Collet 0 mm SE00- SYOZ 0 / Collet 0 / SE00- SYOZ 0 / Collet 0 / Other sizes available, call for pricing. SyoZ FoR woodworking MAChIneS (RDo) This collet used on HP and HP Perske motors and. Dual End Perske motors Description Length Inside SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ / Collet / SE0- SYOZ Collet SE0-mm SYOZ mm Collet mm SE0-mm SYOZ mm Collet mm SE0-mm SYOZ mm Collet mm SE0-0mm SYOZ 0mm Collet 0mm SE0-mm SYOZ mm Collet mm Other sizes available, call for pricing. ULTRA high-speed CoATeD CLAMPInG nuts Compatible with RDO and Ortlieb Nuts Above Description Length SE00 EOC 0 0 SE00 SYOZ 0/RDO 0 0 SE0 SYOZ /RDO 0 0 SE00-L SYOZ 0/RDO 0 0 Lefthand SE0-L SYOZ /RDO 0 0 Lefthand SPAnneR wrenches For SYOZ 0 and SYOZ Above Type SE0 SYOZ 0/RDO 0 SE0 SYOZ /RDO
2 SESD-0mm CnC woodworking Collets ShoDA CoLLeTS (old STyLe) (A) Length (L) Inside Description (d) SESD-0mm-.0 0mm (old style) / 0.0 SESD-0mm-. 0mm (old style) / 0. SESD-0mm-. 0mm (old style) / 0. SESD-0mm-.00 0mm (old style) / 0.00 SESD-0mm-. 0mm (old style) / 0. SESD-0mm-Nut Old Style Nut 0 SESD-C00 SESD-C0 SESS- Super Shoda Nut Super Shoda Extended Nut ShoDA CoLLeTS (PIGGy BACK) (A) Length (L) Inside Description (d) SESD-C00-. Piggy back / Collet. SESD-C00-. Piggy back / Collet. SESD-C00-.0 Piggy back / Collet.0 SESD-C00-. Piggy back / Collet. SESD-C00-. Piggy back / Collet. SESD-C Piggy back / Collet.00 SESD-C00-mm Piggy back mm Collet mm SESD-C00-Nut Nut for Piggy back 0 ShoDA CoLLeTS (new STyLe) (A) Length (L) Inside Description (d) SESD-C0-. Shoda mm (new style) /. SESD-C0-.0 Shoda mm (new style) /.0 SESD-C0-. Shoda mm (new style) /. SESD-C0-. Shoda mm (new style) /. SESD-C0-.00 Shoda mm (new style) /.00 SESD-C0-. Shoda mm (new style) /. SESD-C0-.0 Shoda mm (new style) /.0 SESD-C0-mm Shoda mm (new style) mm mm SESD-C0-Nut Nut for New Style 0 ShoDA CoLLeTS (SUPeR ShoDA ) Description (A) Length (L) Inside (d) SESS-- Super Shoda 0,000 RPM 0.0 SESS-- Super Shoda 0,000 RPM 0 / SESS--mm Super Shoda 0,000 RPM 0 mm SESS-- Super Shoda 0,000 RPM 0 / SESS-- Super Shoda 0,000 RPM 0 / SESS--Nut Nut for Super Shoda SESS--ext-nut Extended Nut for Super Shoda 0 Other sizes available, call for pricing. ShoDA nuts (A) Length (L) Description SESD-0mm-Nut Old Style Nut 0 SESD-C00-Nut Piggyback Nut 0 SESD-C0-Nut New Style Nut 0 SESS--Nut Super Shoda Nut SESS--ext-nut Nut for Super Shoda 0 Shoda New Style Nut
3 PLeASe at our new SIZeS! Collet ER er CnC woodworking Collets er PReCISIon CoLLeTS Inch Sizes Standard.000 TIR er er er0 er er er0 Shank SE0- SE0- / SE0- SE0- SE00- SE0- SE0- / SE0- SE0- SE00- SE0- SE0- SE00- / SE0- SE0- SE00- SE0- SE0- SE00- / SE0- SE0- SE00- SE0- SE0- SE00- / SE0- SE0- SE00- SE0- SE0- SE00- / SE0- SE0- SE00- SE0- SE0- SE00- / SE0- SE00- SE0- SE0- SE00- / SE0- SE00- SE0- SE0- SE00- / SE0- SE00- SE0- SE0- SE00- / SE0- SE00- SE0- SE0- SE00- / SE0- SE00- SE0- SE0- SE00- / SE00- SE0- SE0- SE00- / SE00- SE0- SE0- SE00- / SE00- SE0- SE0- SE00- / SE0- SE0- SE00- / SE0- SE0- SE00- / SE0- SE0- SE00- / SE0- SE0- SE00- / SE0- SE00- / SE0- SE00- / SE0- SE00- / SE0- SE0- SE00- / SE00- Collet ER er PReCISIon CoLLeTS Metric Sizes (note mm is part of the part number) er er0 er er er0 Shank SE0-mm mm SE0-mm mm SE0-mm mm SE0-mm SE00-mm SE0-mm SE0-mm SE00-mm mm SE0-mm SE00-mm SE0-mm SE0-mm SE00-mm mm SE0-mm SE00-mm SE0-mm SE0-mm SE00-mm mm SE00-mm SE0-mm SE0-mm SE00-mm mm SE00-mm SE0-mm SE0-mm SE00-mm mm SE0-mm SE0-mm SE00-mm mm SE0-mm SE0-mm SE00-mm mm SE0-mm SE0-mm SE00-mm mm SE0-0mm SE00-0mm 0mm SE00-mm mm See Chart on page for dimensions. Other sizes available. Call for pricing. Collet Set er PReCISIon CoLLeT SeTS Description Range Includes SE00 ER-Metric ( pc. Set) mm 0mm -0mm SE0 ER ( pc. Set) / / / -/ SE0 ER ( pc. Set) / / / -/ SE0 ER0 ( pc. Set) / / - Sets come in wooden tray. Wooden tray also sold separately.
4 CnC woodworking Collets TG PReCISIon CoLLeTS TG TG0 TG0 ShAnK SE000- SE00- / SE000- / SE000- SE00- / SE000- SE00- / SE000- SE00- SE00- / SE000- SE00- SE00- / SE000- SE00- SE00- / SE00- SE00- / SE00- SE00- SE000-nut See Chart on page for dimensions. Other sizes available. Call for pricing. Heian Collet heian CoLLeTS SEHN-mm-. SEHN-mm-. SEHN-mm-.00 SEHN-mm-. SEHN-mm-.0 SEHN-mm- SEHN-mm-0 SEHN-mm-. SEHN-mm-.00 SEHN-mm-.0 SEHN-Piggyback- SEHN-Piggyback- SEHN-Piggyback- SEHN-Piggyback- Description / Heian Collet / Heian Collet / Heian Collet / Heian Collet / Heian Collet mm Heian Collet 0mm Heian Collet / Heian Collet / Heian Collet / Heian Collet / Heian Piggyback Collet / Heian Piggyback Collet / Heian Piggyback Collet / Heian Piggyback Collet er Bearing nuts ER Bearing Nut ER Coated Nut Inside Maximum Description Length Spanner Clamp Torque SE ER Bearing Nut. SE0 ft. lbs. SE ER Bearing Nut 0 SE0 ft. lbs. SE ER0 Bearing Nut SE0 ft. lbs. er high-speed Coated nuts Inside Maximum Description Length Spanner Clamp Torque SE ER High Speed Nut x.. SE00 0 ft. lbs. SE ER High Speed Nut x. SE0 0 ft. lbs. SE ER0 High Speed Nut x.. SE0 ft. lbs. SE ER High Speed Nut x. 0. SE0 ft. lbs. SE ER High Speed Nut 0 0 x. SE0 ft. lbs. SE ER0 High Speed Nut 0 x. SE0 ft. lbs. Coated nuts give up to 0% more clamping pressure over bearing nuts. For use when speeds exceed,000 rpm. Recommended torque is 0 to 0% of max value.
5 easy Collet Reference Sheet ALMoST ALL CoLLeTS have A DISTInCTIVe LenGTh AnD DIAMeTeR. USe The ReFeRenCe SheeT BeLow To DeTeRMIne your CoLLeT TyPe. ER Collet TG Collet CoLLeT SeRIeS LenGTh DIAMeTeR ER mm (0.0 ).mm (0. ) ER.mm (.0 ) mm (0. ) ER 0.mm (. ) mm (0. ) ER mm (. ) mm (.0 ) ER 0mm (. ) mm (. ) ER 0 mm (. ) mm (. ) ER 0 0mm (. ) mm (.0 ) EOC mm (.0 ).mm(0. ) SYOZ 0 RDO 0 EOC 0E mm (. ) 0mm (0. ) EOC RDO 0mm (. ).mm ( ) SYOZ RDO E mm (.0 ) mm (. ) EOC 0mm (. ).mm (. ) TG mm (. ) mm (.0 ) TG 0 0mm (. ) mm (. ) TG 0.mm (.00 ) 0.mm (.00 ) Shoda Collets SD-0mm mm (.0 ) 0mm (Back side) SD-C00 mm (.0 ) mm (Back side) SD-C0 mm (.0 ) mm (Back side) SS- 0mm (. ).mm 0. (OD) heian Collets HN-mm mm (. ) mm (Back side) HN-mm mm (. ) mm (Back side) HN-Piggyback.mm (. ) mm (Back side) SYOZ Collet Slotted Wrench Hook Wrench Hex Wrench Mini Wrench A Hex Wrench er Spanner wrenches TyPe A, UM, RU, M Collet Nut Length Width Nut Type SE00 ER Wrench SE 0 A (Hex) SE00 ER Wrench SE A (Hex) SE0 ER0 Wrench SE 0 A (Hex) SE0 ER Wrench SE 0 Slotted SE0 ER0 Wrench SE0 0 Slotted SE0 ER Wrench SE 0 Slotted SE0 ER Wrench SE Slotted SE0 ER0 Wrench SE 0 Slotted SE0 ER0 Wrench SE0 Slotted SE00 ER Wrench SE ER Mini SE0 ER Wrench SE ER Mini SE0 ER Wrench SE. ER Mini SE0 ER 0 Wrench SE. ER Mini SE0 ER Wrench SE.. ER Mini SE00 TG Wrench SE00 Hook SE0 TG 0 / SYOZ Wrench SE 0 Hook SE0 SYOZ 0 Wrench SE00 Hook
6 Tool holders For CnC Routers ISo AnD SK CoLLeT holders Balanced to,000 G. Description D A F N Flat Wrench SE0000-0M ISO 0 x ER M-mm 0. SE0 SE0000- ISO 0 x ER -mm 0. SE0 SE ISO 0 x ER 0-mm 0. SE0 SE-W ISO 0 x ER M-0mm 0 0. SE0 SE00-CMS ISO 0 x ER -CMS. 0 SE0 SE0 ISO 0 x ER 0-CMS. SE0 SE-W-0 ISO 0 x ER -0mm SE0 SE-W-0-L ISO 0 x ER -0mm Left SE0 SE-W- ISO 0 x ER -mm 0. 0 SE0 SE-W--L ISO 0 x ER -mm Left 0. 0 SE0 SE-W-0 ISO 0 x ER -0mm SE0 SE-W- ISO 0 x ER 0-mm 0. SE0 SEPE0DF0 ISO 0 x ER. 0 SE0 ISO Holder SEPE0DM0 ISO 0 x ER W/Locking Teeth SE0 Collet Nuts are included with holder. SE-W ISO 0 x ER0-0mm. 0. SE0 Andi / weeke / Thermwood CnC Chucks Collet Nuts are included with holder. * Description D A F N Flat Wrench SENT-000 SK-0 x OZ Toolholder SE0 SENT-000-L SK-0 x OZ LH Toolholder SE0 SEISO-0-THERM Thermwood ISO 0 x ER-0mm None 0 0 SE0 Collet Nuts are included with holder. Dimensions in millimeters. BT0 Chucks Description D A F N Wrench SE0-W BT0 x ER 0-0mm w/o Slots 0 0 SE0 SE0-slotnut BT0 x ER0-0mm w/ Slots 0 0 SE0 SE0 BT0 x ER0-mm w/o Slots 0 SE0 SE0-slotnut BT0 x ER0-mm w/ Slots 0 SE0 SE0-. BT0 x ER0-. w/o Slots. 0 SE0 SE0-.-slotnut BT0 x ER0-. w/ Slots. 0 SE0 SE0 BT0 x ER-0mm 0 0 SE0 SE0-W-0 BT0 x ER-0mm 0 0 SE0 SE0 BT0 x ER-mm 0 SE0 SE0-0 BT0 x ER-0mm 0 0 SE0 SE0 BT0 x ER -0mm w/ Slots SE0 SE0-W-0 BT0 x ER -0mm w/o Slots SE0 SE0-W-0-A BT0 x ER-0mm Komo SE0 SE0-W-0L BT0 x ER -0mm Left Hand SE0 SE0 BT0 x ER -0 w/ Slots SE0 SE0-W-0 BT0 x ER -0mm w/o Slots SE0 SE0 BT0 x ER -0mm SE0 SE0 BT0 x ER0-0mm 0 0 SE0 SE000-W BT0 x SYOZ -0mm w/o Slots SE0 SE000 BT0 x SYOZ -0mm SE0 *Pull Stud Included mm Flats Komo BT Chucks SE00 BT x SYOZ -mm 0 SE0 SE0BT BT x ER -mm 0 SE0 Collet Nut are included with holder. Dimensions in millimeters. Collet Nuts are included with holder.
7 hsk Collet Toolholders For CnC Routers hsk e CoLLeT TooLhoLDeRS Description D d L L Flats Wrench SE-0 HSK E x ER mm mm 0mm mm mm SE0 SE000 HSK 0E x ER - 0mm mm mm mm mm SE0 SE000 HSK 0E x ER - 0mm mm mm mm mm SE0 SE000 HSK 0E x ER - 0 0mm 0mm 0mm 0mm mm SE0 SE000 HSK 0E x ER - 0mm 0mm mm mm mm SE0 SE000 HSK E x ER - 0 mm 0mm 0mm mm None SE0 SE000 HSK E x ER0 - mm mm mm mm None SE0 SE000 HSK E x ER0 - mm mm mm mm None SE0 Type E D Type F hsk F CoLLeT TooLhoLDeRS Description D A F N Flats Wrench SE000 HSK 0F x ER - 0mm 0mm 0mm mm 0mm NONE SE0 SE-0000 HSK F x ER - 0mm mm 0mm mm mm mm SE0 SE-0000 HSK F x ER - 0mm mm 0mm mm mm mm SE0 SE0000 HSK F x ER - 0mm mm 0mm mm 0mm mm SE0 SE000 HSK F x ER0 - mm mm mm mm mm mm SE0 SE000 HSK F x ER0-0mm mm 0mm mm mm mm SE0 SE000 HSK F x ER0 - mm mm mm mm mm mm SE0 SE HSK F x SYOZ - 0mm mm 0mm mm 0mm mm SE0 er Tool extenders Extension length should not exceed a : ratio of length to diameter. For example, a / shank should not extend more than in front of the holder. This is true only for applications where the extension is rotating. Shank Overall Length Collet Wrench Nut SE0 / mm mm ER SE00 SE SE0 /.mm mm ER SE0 SE SE0 /.mm mm ER SE0 SE SE0 / mm mm ER SE0 SE SE0 / mm mm ER SE0 SE SE0 / mm mm ER0 SE0 SE SE0 mm mm ER0 SE0 SE SE0 0mm mm ER SE0 SE SE0 / mm mm ER SE0 SE Extenders have threaded thru holes for a backup screw. Includes nut. Collet and wrench sold separately
8 hsk hydraulic Toolholders For CnC hsk F hydraulic TooLhoLDeRS Type d d d d L L SE0-0 HSK F Hydro Chuck 0mm ID SE0-0 HSK F Hydro Chuck mm ID 0 0 SE0-00 HSK F Hydro Chuck mm ID 0 SE0-0 HSK F Hydro Chuck ID.0 0 ISo 0 hydraulic TooLhoLDeRS Type d d d d L L SE00- ISO / SK 0 Hydro Chuck / ID / SE00- ISO / SK 0 Hydro Chuck ID Dimensions in millimeters unless otherwise indicated. SE0-0 Reducing Sleeves for hydraulic Toolholders InCh od / InCh ID T.I.R. only.000 Description d D D L L L SE00-0 / OD X / ID SE00- / OD X / ID SE00- / OD X / ID SE00- / OD X / ID SE00- / OD X / ID SE00- / OD X / ID SE00- / OD X / ID SE00- / OD X / ID MeTRIC od / InCh ID Description d D D L L L SE00-0mm OD X / ID 0.0 0mm mm.mm 0.mm mm SE00-0mm OD X / ID 0.0 0mm mm.mm 0.mm mm SE00-0mm OD X / ID 0. 0mm mm.mm 0.mm mm SE00-0mm OD X / ID 0. 0mm mm.mm 0.mm mm SE00-0mm OD X / ID mm mm.mm 0.mm mm SE00-0mm OD X / ID 0. 0mm mm.mm 0.mm mm MeTRIC od / MeTRIC ID Description d D D L L L SE mm OD X mm ID mm 0mm mm.mm 0.mm mm SE mm OD X mm ID mm 0mm mm.mm 0.mm mm SE mm OD X mm ID mm 0mm mm.mm 0.mm mm SE mm OD X mm ID mm 0mm mm.mm 0.mm mm SE mm OD X mm ID mm 0mm mm.mm 0.mm mm SE mm OD X mm ID mm 0mm mm.mm 0.mm mm SE00-0 mm OD X mm ID mm mm 0mm mm mm mm SE00-0 mm OD X mm ID mm mm 0mm mm mm mm SE00-0 mm OD X mm ID mm mm 0mm mm mm mm SE00-0 mm OD X mm ID mm mm 0mm mm mm mm SE00-0 mm OD X mm ID mm mm 0mm mm mm mm SE00-0 mm OD X 0mm ID 0mm mm 0mm mm mm mm SE00-00 mm OD X mm ID mm mm 0mm mm mm mm SE00-0
9 er Mini nuts Maximum Description D B M Wrench Torque SE ER Mini Nut mm mm M x 0. SE00 ft/lbs SE ER Mini Nut mm mm M x 0. SE0 ft/lbs SE ER Mini Nut mm mm M x.0 SE0 ft/lbs SE ER 0 Mini Nut mm.mm M x.0 SE0 ft/lbs SE ER Mini Nut mm mm M0 x.0 SE0 ft/lbs ER High-Speed Nut high-speed Use ER High-Speed mini nuts for applications where speed exceeds,000 RPMs. They are balanced to G. for 0,000 RPMs. These nuts are used on collet holders and multi-spindle heads where center or shoulder distances are important. Maximum Description D B M Wrench Torque SE ER HS Mini Nut mm mm M x 0. SE00 ft/lbs SE ER HS Mini Nut mm mm M x 0. SE0 ft/lbs SE ER HS Mini Nut mm mm M x.0 SE0 ft/lbs SE ER 0 HS Mini Nut mm.mm M x.0 SE0 ft/lbs SE ER HS Mini Nut mm mm M0 x.0 SE0 ft/lbs SE-L ER HS L-Hand Nut mm mm M0 x.0 SE0 ft/lbs Type D d d d L L L 0 T SE0- KOMO 0-A M SE00 DAT 0-A 0 M SE00 DAT 0-A 0 0 M SE00- Colombo 0 Ball. 0 M SE0 HSD ISO0. Radius M SE00 BT 0-º.. 0 M SE00 BT 0-º 0 M SE00 BT 0-º M SE00 BT 0-0º.. M SE00 BT 0-0º M SE0 BT 0-0º M SE0 BT 0-0º.. M SE0 BT 0-0º 0 M SE00 BT -Heian M SE00 SE00- SE0- SE0 Pull Studs For CnC Routers (Retention Knobs) Colombo Spindles Columbo Spindles Clamping by Balls Komo Router for BT0 Holder HSD Spindles Please make sure that the pull stud you order is the exact pull stud your machine uses. Improper choice of a pull stud can cause damage to your machine spindle, the tool holder, and can cause a serious safety hazard. Pull Stud
10 ISo 0 & hsk F Arbors Description L GL D B N SE00-0 ISO 0 x / x 0mm arbor 0mm mm -/ 0mm mm SE00- ISO 0 x / x mm arbor mm mm -/ 0mm mm SE00-0 ISO 0 x / x 0mm arbor 0mm mm -/ 0mm mm SE00-0 ISO 0 x / x 0mm arbor 0mm mm -/ 0mm mm Special sizes made to your specifications. Contact us for details. ISO 0 Special screw design for enhanced safety Description D L N B GL SE0 HSK F / arbor x mm -/ mm mm 0mm mm SE0-H HSK F / arbor x 0mm -/ 0mm mm 0mm mm SE HSK F / arbor x 0mm -/ 0mm mm 0mm mm SE HSK F / arbor x mm -/ mm mm 0mm mm HSK F Tightening Stand For ISo, hsk & BT0 Tool Holder Description Used For SENTS-ISO0- ISO 0-mm Flats -W-, -W-0 SENTS-ISO0- ISO 0-mm Flats NT-000 SENTS-ISO0- ISO 0-mm Flats -W-0, -W- SENTS-BT0- BT0 Taper mm Flats SENTS-BT0-SLOT BT0 with Drive Slots SENTS-BT0- BT 0 - Taper mm Flats 0-W-0 SENTS-HSKA HSK A No Flats SENTS-HSKF- HSK F - mm Flats 0000 SENTS-HSKF- HSK F - mm Flats SENTS-HSKF- HSK F - mm Flats SENTS-HSKF- HSK F - mm Flats 000, 000, 000 New design for easy access to pull studs from bottom Constructed of precision machined anodized alloy Outstanding strength, speed, and durability Securely bolts right on CNC Machine or workbench
11 CnC Accessories DUST CoVeRS FoR CoLLeT nuts / DIAMeTeR X / ThICK SEDC SEDC- SEDC- SEDC- SEDC- SEDC- SEDC- SEDC- *Sold Individual Description Dust Cover / Shank Dust Cover / Shank Dust Cover / Shank Dust Cover / or mm Shank Dust Cover / Shank Dust Cover / Shank Dust Cover / Shank SE0 SE0 Spindle Taper wipers Taper Handle Taper Max. Taper Length Length SE SE00 0 SE SE0 HSKA n/a SE0 HSKF n/a Collet Brushes Collet Brushes SECB0 SECB SECB SECB00 SECB SECB0 SECB00 SECB-KIT SECB-KIT Description / Brush / Brush / Brush / Brush / Brush / Brush Brush /, /, /, / Brushes /, /, /, /, /, /, Brushes
12 Torque wrench Range of Description Torque Length Spigot SE0TH Torque Wrench - ft/lbs mm Round SE00TH Torque Wrench 0-0 ft/lbs. mm Round SE00TH Torque Wrench - ft/lbs. mm Round Torque Wrench Torque wrench Accessories FoR BT, CAT, ISo AnD hsk TooL holders Collet Nut Wrench Maximum Size Type Torque SESD-0mm-TWA Fits all Old Style SD Collet Nuts Hook SESD-C00-TWA Fits Piggy Back Style Collet Nuts Hook SESD-C0-TWA Fits New Style SD Collet Nuts Hook SESSTWA Fits all SS- Collet Nuts Hex 0 ft/lbs SESSEXTTWA Fits all SS- Extended Nuts Hex 0 ft/lbs SE00- ER Slotted 0 ft/lbs SE00- ER Hex Hex 0 ft/lbs SE00-0 ER 0 Slotted ft/lbs SE00-0 ER 0 Hex Hex ft/lbs SE00- ER Slotted Slotted ft/lbs SE0 ER Mini Mini ft/lbs SE0 ER Mini Mini ft/lbs SE0 ER 0 Mini Mini ft/lbs SE0 ER M Mini ft/lbs SE00- ER Slotted Slotted ft/lbs SE00-0 ER 0 Slotted Slotted ft/lbs SE00- SYOZ /TG 0 Hook 0 ft/lbs SE00-TWA TG Slotted Hook 0 ft/lbs SE0-R ER Slotted Slotted ft/lbs ReTenTIon KnoB SoCKeTS Taper or Wrench Square Maximum Holder Flats Drive Torque SEPSS-0BT BT 0 Taper Pull Studs 0. / 0 ft/lbs SEPSS-0ISO ISO 0 Taper Pull Studs 0. / 0 ft/lbs SEPSS-0 BT 0 Taper Pull Studs 0.0 / ft/lbs SEPSS-0 BT 0 Taper Pull Studs. / ft/lbs SEPSSC-0 CAT 0 Taper Pull Studs.0 / ft/lbs FIXeD head SQUARe DRIVeS Square Description Drive SE / Square Drive / Drive SE / Square Drive / Drive
13 SE SE0 SE Hot New Items Carbide-Tipped Glue Space Flush Trim Bits Cutting Cutting Length Shank SE / / / SE / / SE / / / SE / / SBE Bearing Dodds Dovetail Bits Angle Cutting Shank Overall Length SE0R 0.0 / - SE0L 0.0 / - Solid Surface Repair Set SE SE SE Description Flute Plug Cutter Flute Bevel Cutter If you have ever cut a hole in a piece of solid surface in the wrong place, then you need this set. The bevel bit cuts a taper in the hole that was cut wrong and needs to be repaired. The flute plug cutter cuts a tapered plug that will match the taper from the bevel cutter. Once you have finished you will have a virtually undetectable repair of the solid surface. Effective for repairs up to -/ in Measuring Equipment SE--0 SE--0 SE0- Description Height Gauge Analog Axial Preset Gauge SE0-
FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More informationACE LOCK Milling Chucks
ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter
More informationHPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationSpindle & Taper Care Products
Spindle & Taper Care Products Swiss Precision Tools UltraSonic Cleaner Ultrasonic Cleaner Ultrasonic Cleaning Solution US-40SE US-815CLEAN Heavy duty stainless steel double-wall design provides highly
More informationCOMPANY INTRODUCTION
COMPANY INTRODUCTION Uncompromising Quality Utilizing State-of-the-Art Facilities and Equipment DMG-MORI Multitasking CNC Machines The work piece is completed in a single set-up. Assures the best qualities
More informationCALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationAccessories. Other Accessories
.01 Wrenches.03 Wrench Heads.04 Torque Wrenches.05 Features and Benefits of Counter Nut.05 CM/ER Counter Nut.06 Trays for Collet Sets.06 Trays for Sealing Disk Sets.07 Clamping Units PGU/PGC Other.09 WMB
More informationLeading the Way... In CNC Tooling Technology in the 21 st Century
Leading the Way... In CNC Tooling Technology in the 21 st Century Leading the Way... In CNC Tooling Technology in the 21 st Century We specialize in CNC tooling and workholding devices for horizontal and
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationDOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationCOLLET HOLDER. CTA type. CTH type For high-speed. 3 times longer cutter life with using high-precision collet
OET HOER M/ TOO OET HOER Ultra precision taper collet chuck The best-suited base holder applicable to all the kinds of machining This holder meets all the requirements for high-speed cutting; Accuracy,
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationHIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
More informationTECHNICAL INFORMATION Model No. Description
TECHNICAL INFORMATION Model No. Description 4114, 4114S Angle Cutter 355mm (14") PRODUCT P 1 / 6 CONCEPT AND MAIN APPLICATIONS Model 4114S is the 355mm (14") version of the current 4112S 305mm (12") Angle
More informationE3000 SERIES CONTROL UNIT
ispeed E E BRUSHLESS MOTOR & SPINDLE SERIES Modular Type (ø mm),~, min- (rpm) Maximum Output W Motor speed is displayed accurately on the front panel. Auto or Manual Control Modes. Can be installed on
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationWSK COLLET CHUCK CHCHUCK WSK COLLETWS UC K K CO LL ET 74
WS K COLLET COLL CO LLET ET CHUC CH UCK 74 MAS403 BT-P CODE NO. D1 D2 L1 COLLET NUT G1 BT30 P6-2.0-6.0 19.6 6 N6 M8X1.0 P10-2.0-10.0 27.5 10 N10 M11X1.0 P6-2.0-6.0 19.6 P6-6 N6 M8X1.0 BT40 P10-2.0-10.0
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationVARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY.
PM4200 MILLING MACHINE VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY. Quality Machine Design with Power-Packed Performance Precision machined dovetail ways and adjustable gibs
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationAlberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30
350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &
More informationHIGH TORQUE LIVE TOOLS
HIGH TORQUE LIVE TOOLS Mori Seiki NLX 4000 High Torque Live Tools Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com
More informationER TOOLHOLDING SYSTEM
ER TOOLHOLDING SYSTEM HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and Autofacer 1977 Parlec expands
More informationMaintenance Information
04581245 Edition 2 May 2014 Air Grinder, Die Grinder and Sander Series G2 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationANGLE HEADS. Productivity Solutions.
ANGLE HEADS Productivity Solutions www.kuvamtechnologies.com Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team and Win for the
More informationCNT-950 Series Machine Pricing
The CNT-950 Series CNC Router Packages include the following features: Bridge, Table and Z-Head; Router Spindles and Dust Boots; Electronics, Servo Motors and Drives; Thru-vacuum Hold-Down System; Computer,
More informationBT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95.
BT Shank Tools BT30.................................................................................E2 E18 BT40................................................................................E20 E60 BT50................................................................................E62
More informationER Collet Chucks TOOLHOLDING
ER Collet Chucks All ER collet chuck tapers meet or exceed approprate standards. See Techncal Secton n front of catalog for specfcatons. BALANCEABLE AVAILABLE Constructed of alloy steel for long, durable
More informationDV Shank Tools DV40...F2 F37 DV50...F38 F71
DV Shank Tools DV40..................................................................................F2 F37 DV50.................................................................................F38 F71
More informationpowrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
More informationKeyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors
Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose
More informationBT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2
/ER MAS 3 Form A+AD D [mm] D [mm] 30/ER 6 x 0 H 30.6 69. 5 5. 5 FRW 5 30/ER 6 x H 30.65 5 7. 5 FWR 5 30/ER 5 x 0 H 3 0 3 6. 5. -- FWR 35 30/ER 5 x H 35 0 3 88. 5 -- FWR 35 30/ER 3 x 0 30.3 0 7. 3 30/ER
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E493 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 7 3 (E1) 1 2 3 4 501 502 48 11 12 13 14 15 24 25 26 30 31 32 25 5 6 16 17 18 19 27 28 33 34 35 7 8 20 29 21 9 22 10 23 36
More informationClamping Nuts. Sealing Disks Coolant Flush Disks. Clamping Nuts. Sealing Disks (DS) Coolant Flush Disks (KS)
Clamping Nuts Sealing Disks Coolant Flush Disks Clamping Nuts.01 Features and Benefits.02 Assembly Instructions.0 Hi-Q/ER Standard Nuts.06 Hi-Q/ERC Standard Coolant Nuts for DS and KS Disks.08 Hi-Q/ERC
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationCCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12
AF 90 rill ndmill Fig. 1 F7 ( ) F7 φ=1 7 68 60 ( 55 ) 42 ( 46 ) φ72 Fig. 2 4,000min Fig. 4 Fig. 6 4,000min F12 FA20 FT6 78 59 59 62 4,000 min 5,000min 4,000min 29 29 φ=2.5 13 φ=5.8 20 φ=3 12 58 Fig. 3
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationUNISON CORPORATION. DedTru Centerless Grinding Product Line
Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti
More informationAbrasives & Abrasive Hardware. ISO 9001:2008 Quality Management System
Abrasives & Abrasive Hardware ISO 9001:2008 Quality Management System Clesco the Abrasive Hardware Specialist This catalog reflects the major product categories & is not comprehensive in including all
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E944 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 73 1 14 1 2 3 4 5 6 7 11 8 9 10 30 30 12 13 17 18 12 14 31 19 15 16 32 33 20 21 22 23 34 35 A 24 25 26 38
More informationHigh Speed Jet Spindle
1/28 High Speed Jet Spindle 2/28 High speed jet spindle TaeguTec has launched a revolutionary new high-speed spindle developed for applications using high RPM for small diameter tools that can be used
More informationOperation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation. Figure l
Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation Major Components Figure l Basic Operation: High pressure coolant enters the Titespot Angle Head and drives an integral
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E943 ELECTRIC TOOL PARTS LIST COMPOUND MITER SAW Model 2005 10 5 (E1) 83 1 14 1 2 3 4 5 6 7 11 8 9 10 39 39 12 13 19 20 12 14 40 21 15 16 41 42 22 23 24 25 17 18 43 44 37 38 A
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationHES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More informationWoodworking CNC Tool Holder Catalog
Woodworking CNC Tool Holder Catalog T-Tool US LLC 28 Glades Circle Suite 11 Weston, FL 337 Engineering, Production and Distribution ll from one source Telephone 954-358-6071 Telefax 954-358-6073 E-Mail
More information.4 hp Die Grinders & Disc Sanders
.4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationVTR Series Track Roller Assembly V-Grooved Stud Type Concentric Ball & Tapered Roller Bearings
VTR Series Track Assembly V-Grooved Type Concentric Ball & Tapered Bearings VTR-3.50E A B C D F FL G H P SD SL T Type Track Width Groove Center Hex Point Shoulder Shoulder Width + Shoulder VTR-1.50 1.50
More informationIndustrial Drill Chucks & Live Centers
Since 1957 Industrial Drill Chucks & Live Centers 2 From our headquarters in the province of Barcelona, Spain, Llambrich Precision, S.L. has been designing and manufacturing drill chucks and machine tool
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationDRIVEN TOOLS ASK ABOUT OUR PRICE MATCH GUARANTEE WE INVITE INQUIRIES FOR OKUMA, NAKAMURA, MIYANO, BIGLIA
2018 Winter/Spring Flyer Pricing valid from February 1 to May 31, 2018 PRECISION MILLING MACHINE VISES Vises are Matched An integral key and large fasteners reduce deflection by 50% 4 jaw plate positions
More informationpowrgrip System The ambitious toolholding system Product catalog
powrgrip System The ambitious toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Product offering 04 Discover powrgrip 06 Automatic clamping unit PGU 07
More informationRYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET
RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET 1 FIGURE A 36 26 25 24 SEE FIGURE B 23 27 20 28 29 30 35 31 37 33 2 10 22 11 12 9 21 13 14 17 16 15 32 18 31 19 34 SEE FIGURE D 8 6 5 4 2
More informationVýhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationCAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationBORING SYSTEMS INFO. 3 nd edition
BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll
More informationHSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
More informationPHONE /
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / info@wescondsi.com 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E938 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 10 1 (E1) 80 1 15 7 8 9 16 17 18 1 2 3 19 4 20 5 12 6 13 14 13 15 21 11 10 39 40 41 42 43 44 45 46 47 31 38 32 22 33 23 34
More informationLM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
More informationHACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE
HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE Coolant System Hydraulic Feeding Quick Clamping Vise Saw Size 14 Cutting Cap. 7 Saw Size 18 Cutting Cap. 10 Blade 10 KW1500415 CIRCULAR
More informationWhat is HSK-T? HSK T. Feature. Compatible with HSK-A. Increased cutting accuracy at turning process. Compatible
What is HSK-T? HSK-T interface was developed to maximize cutting ability of multi-tasking machines. HSK-T interface became ISO standard (ISO121 164-3:2008) in 2008. Feature Compatible with HSK-A HSK-T
More informationREGO-FIX is a registered trademark. Icons used in this catalog
The products described in this catalog are specified to the best of our knowledge. The data given herein are dependent on the conditions under which they are measured and are derived from tests carried
More informationBENZ Shaped Profile Tooling on a Haas DS30 SSY Turret.
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret www.benztooling.com March 2015 Table of Contents Live Tools ST 10 (Y) ST 20 (Y) ST25 (Y) ST 30 (Y) ST 35 (Y) DS 30 (Y) ST 20 SS (Y) ST 30 SS (Y) DS
More information20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)
20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain
More information