Bimetal Thermowells Threaded

DIAL SIZE Select a dial size that allows you to comfortably read the dial from the normal distance when installed.

53 RANGE The maximum operating pressure should not exceed 75% of the full-scale range. The normal operating range should be in the middle half of the range (between 25% and 75% of the fullscale range);

Steam & Hot Water INSTRUMENTS. Adjustable Angle Industrial Thermometer. Econo Thermometer. ] Aluminum Stem. ] Air-Duct Stem

Adjustable Angle Industrial Thermometer Recognized globally as the Trerice BX Industrial Thermometer, this is an instrument of extreme accuracy and rugged dependability. Available in scale lengths of 7"(AX),

AccuTru Thermowells. Dedicated to those organizations that value improved temperature measurement for critical processes

S E N S O R T E C H N O L O G I E S AccuTru Thermowells Dedicated to those organizations that value improved temperature measurement for critical processes Section 5 Index Thermowells Model Page PT-1

ADJUSTABLE ANGLE THERMOMETERS

ADJUSTABLE ANGLE THERMOMETERS Commercial grade units available with 9" aluminum or plastic cases, spirit fill, and 3½" or 6" stems. Unit can be adjusted for easy reading at any angle. SPECIFICATIONS Case:

Rosemount 68 Sensor and Thermowell

Rosemount 68 Sensor and Thermowell The Rosemount 78 Sensor and Thermowell have designs that provide flexible and reliable temperature measurements in process environments. Features include: Industry-standard

TEL-TRU Manufacturing Co. DIGI-TEL THERMOMETERS. Replacement for Liquid-in-Glass Thermometers. m

TEL-TRU Manufacturing Co. DIGI-TEL THERMOMETERS Replacement for Liquid-in-Glass Thermometers www.teltru.co m Tel-Tru Manufacturing Company 408 St. Paul St., Rochester, New York 14605 USA Phone: 585.232.1440

Rosemount 183 Sensor and Thermowell

Rosemount 183 Sensor and Thermowell The Rosemount 183 Sensor and Thermowell have designs that provide flexible and reliable temperature measurements in process environments. Features include: Industry-standard

Probes.STD: Standard Probe (1, 3, 4, 5, 6).HIT: High Temp Probe (1, 3).SED: Sediment Probe (1, 3).SAN: Sanitary Probe (2)

Mark X if none Power Pac Sample VR41.X R. G036.STD Extension Probe Probes.STD: Standard Probe (1, 3, 4, 5, 6).HIT: High Temp Probe (1, 3).SED: Sediment Probe (1, 3).SAN: Sanitary Probe (2) Extensions (Use

LEVEL CONTROL SWITCHES

The LINC-282 & LINC-282SC Series: Snap Acting, Non-Bleed Pneumatic Level Control Switches Application: These units are used as a level control or as a high or low level alarm. The pneumatic output can

BinMaster Price Book

BinMaster Price Book Vibrating Rod Prices Subject To Change Without Notice Not responsible for errors or omissions. F.O.B. Lincoln, Nebraska USA Shipping Address: 7201 N. 98th St., Lincoln, NE 68507 /

DIGI-TEL THERMOMETERS

TEL-TRU MANUFACTURING COMPANY DIGI-TEL THERMOMETERS www.teltru.com ELECTRONIC DIGITAL THERMOMETERS Tel-Tru s DIGI-TEL Thermometers combine the easy, quick visual reference feature of a local indicator

Electronic Temperature Sensor

Connection Head Type RTD or Element or RTD Cast Aluminum, Polypropylene or Stainless Steel Head Weather Proof Welded or Spring Loaded TDD TMD Hot Junction: Head Process Connection Conduit Connection 100Ω

Thermowell For sanitary applications Model TW22

Thermowells Thermowell For sanitary applications Model TW22 WIKA data sheet TW 95.22 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry, production of active

MAR031615A 1. PABD Installation & Maintenance. Guide *Parts will differ for high pressure valves.

MAR031615A 1 PABD Installation & Maintenance Guide *Parts will differ for high pressure valves. Load Piston U-cup - Piston - U-cup Piston 1. Carefully place the u-cup over the neck of the piston. Load

Pressure transmitter for elevated media temperatures

Data Sheet 402050 Page 1/7 JUMO dtrans p31 Pressure transmitter for elevated media temperatures General application Pressure transmitters are used for measuring the relative (gauge) and absolute pressures

GLASS INDUSTRIAL THERMOMETERS

TEL-TRU MANUFACTURING COMPANY GLASS INDUSTRIAL THERMOMETERS World -Class Thermometers Since 1916 www.teltru.com Glass Industrial Thermometers Tel-Tru Glass Industrial Thermometers are used on pipelines

Diaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection

Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3

FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES

FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved

DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS

DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve

V Series Control Port Ball Valves

Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard

Rosemount Twisted Square Thermowells

Product Data Sheet November 2017 00813-0300-4952, Rev AA Rosemount Twisted Square Thermowells Wide variety of industry standard process connections including flanged, threaded, welded, and Van Stone Large

UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:

SECTION 230519 - METERS AND GAUGES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 ABBREVIATIONS A. Degree

SECTION METERS AND GAUGES FOR HVAC PIPING

SECTION 23 05 19 METERS AND GAUGES FOR HVAC PIPING PART 1 - GENERAL 1.1 SUMMARY A. Work included: Provision of materials, installation and testing of: 1. Thermometers 2. Thermometer Wells 3. Differential

Materials : Carbon steel or stainless steel

Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges

YStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES

Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure

Swing - Out Ball Valves. High Technology Valve & Fitting Series

Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested

D I V I S I O N O F M A R S H B E L L O F R A M

PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil

D I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV

TM TBV Series 21/51 Cryogenic Diverter Ball Valve TBV Series 21/51 Cryogenic Diverter Ball Valve incorporates all features found in the 2100 and provides diverting capabilities for use where two or more

INSTRUMENTATION METERING VALVES. VMT Series.

INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204

910 Series Compact Control Valve

910 Series Compact Control Valve iaphragm ctuated CONTROL VLVES ctuator 7", 9", & 12" ctuator Sizes Heavy uty ie CastHousing 1/2" 6" Valve Sizes The Trerice 910 Series Pneumatic Control Valve offers high

Temperature Controls Pty Ltd ACN: ABN:

Temperature Controls Pty Ltd ACN: 075 298 592 ABN: 966 501 901 83 Sydney (Head Office): 7 Yamma St, Sefton, NSW 2162 Australia Ph: 61 2 9721 8644 Fax: 61 2 9738 9339 Melbourne: 8/280 Whitehall St, Yarraville

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from

Integral bonnet valves, steel bodies, stainless steel trim; wide choice of connections

NORTHEAST CONTROLS INC. TEL: 201-327-7660 FAX: 201-327-3242 www.nciweb.com GAGE COCKS CONNECTION UN~IO~N~~~~EII~= Section: J100 Bulletin: J100.50 Date: 6/05 Supercedes: 1/99 Specialists in Liquid Level

FOOD COUPLINGS DIN 11851

FOOD COUPLINGS DIN 11851 B.3. STANDARD Food couplings complying with DIN 11851 are used in the food, chemical and pharmaceutical industries to connect rubber food hoses and stainless steel pipes (in compliance

Differential Pressure Gauges (701P Series)

Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure

INSTRUMENTATION - valves

Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear

P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients

PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil

SCREWED BONNET NEEDLE VALVES

SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5

Thermowell with threaded flange (solid-machined) Screwed and welded design Models TW10-S, TW10-B

Temperature Thermowell with threaded flange (solid-machined) Screwed and welded design Models TW10-S, TW10-B WIKA data sheet TW 95.11 Applications Petrochemical industry, on-/offshore, plant construction

KO Series. Cast Steel Gate Valves

FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed

Brinda Industries. Process Measuring Instruments.

Brinda Industries Primary Business Address C-1/1301, GIDC Chhatral TA- Kalol, Dist - Gandhinagar, Gujarat - 382729, INDIA. Phone: 91-2764-233434 Fax: 91-2764-233087 E-mail: info@lapressuregauges.com Alternate

Micro Motion T-Series Straight-Tube Mass Flow and Density Meters. Product Data Sheet PS July 2001

Micro Motion T-Series Straight-Tube Mass Flow and Density Meters Product Data Sheet PS-00371 July 2001 Micro Motion T-Series Straight-Tube Meters Micro Motion is proud to offer you the first single-straight-tube

FOUR SERIES OF CHECK-ALL VALVES

INSERT HOUSED TUBING MINI-CHECK FOUR SERIES OF CHECK-ALL VALVES For nearly every possible application and need, you can economically install a Check- All valve. Lightweight, efficient, and rugged, every

SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.

SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,

Model S26 seals for remote and direct mount

Data Sheet DS/S26-EN Rev. I Model S26 seals for remote and direct mount Engineered solutions for all applications Measurement made easy All welded constructions combine an economically feasible and technically

Certificate of Type Approval (RQS)

Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube

2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS

ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.

1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150

ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.

Taps, Dies & Threading

Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1

SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators

Technical Data TYPE A SERIES AIR ADJUSTED PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4011 OPERATING PRINCIPLE

Technical Data SD 4011 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE A SERIES AIR ADJUSTED PILOT PRINTED IN U.S.A. SD 4011/9504 Type A or A83 (wt 6 lb) Type A53 or A 85

Knife Gate & Butterfly Valves Data Sheets

Knife Gate & Butterfly Valves Data Sheets Series 80-TP Series 80-TP/XL Series 80-BA Series 80-SS Series 80-SSRS Series 80-DI Series 150 Series 120 Butterfly Valves Series TM-3 & TM-4 Butterfly Valves www.townley.net

SMS DIN spojke. Food DIN / SMS Couplings. procesna oprema

procesna oprema aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding SMS DIN spojke Food DIN / SMS Couplings SMS FOOD COUPLINGS

Choice of body materials Cast iron, carbon steel, chrome moly, forged steel, stainless steel, bronze.

Strainer Tight seating Both ends of the chamber are precisely machined to provide perfectly round and smooth seating surfaces as well as fixed chamber length. The screen seats snugly on the machined surface

Datasheet Rev.3 Feb 2015 Venturi tube

Datasheet Rev.3 Feb 2015 Venturi tube Venturi tube design based on IS5167, ASME.MFC.3M and IS TR15377 :2007 industry standards No need for calibration standardised principle Accuracy, repeatability and

Single-Seat Valves For the Sanitary Industries

www.swagelok.com Single-Seat s For the Sanitary Industries Stainless steel construction Shutoff, divert, modulating, and specialty valves 1/2 to 4 sizes Kwik-lamp and tube butt weld end connections 3-

Applications. T98H Part Matrix. Specifications. Spring Range. Materials of Construction. T98H Regulator Rebuild Kits. marshbellofram.

TH Back Regulator / Valve The TH monitors upstream pressure and opens to relieve excess pressure increases above setpoint. s a Back Regulator, the upstream pressure is monitored and released downstream

Pressure gauge per EN with mounted diaphragm seal With SMS threaded connection Model DSS19F

Pressure Pressure gauge per EN 837-1 with mounted diaphragm seal With SMS threaded connection Model DSS19F WIKA data sheet DS 95.21 Applications Hygienic pressure measurement in sanitary applications for

Advantages of Grooved Fittings

Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows

Special Kv available. Classification according pressure equipment Directive, 2014/68/UE

SELF-OPERATED PRESSURE REGULATORS PRESSURE REDUCING VALVE MODEL PRV45 PRODUCT FEATURES Self-actuating pressure reducing valve balancing by diaphragm used to provide a constant downstream still there being

AIR PREPARATION PRODUCTS

72 Series Modular Components Quikclamp Maximum Pressure: 17 bar (250 psig) Maximum Temperature: 65 C (150 F) Use with all Excelon 72 Products to provide modular installation capability. Flanges on the

Tri-Clamp ferrules & blanks

Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM

Manifold Valve Accessories

Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.

Glass Tube Full-View Flowmeters

Data Sheet Brooks 1110 and 1140 Series Glass Tube Full-View Flowmeters Model 1110 Full-View Flowmeter (NPT Connections) Model 1140 Full-View Flowmeter (Flange Connections) FEATURES AND BENEFITS Wide choice

1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE

ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.

Light Powered Digital Thermometers

Remote Reading Direct Mount Light Powered Digital Thermometers BiMetal Stem 1/4" ASME B40.3 Vapor Stem 7/16" ASME B40.4 Gas Stem 3/8" ASME B40.4 Weiss Instruments is pleased to introduce our new products.

1 (25mm): Acrylic Others: Glass standard, hermetically sealed

Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection

Jordan Control Valve Series

Jordan Control Valve Series JCVS Globe Style Control Valves Mark ED and ET Globe Style Control Valves The Mark ED and ET are single port, globe style bodies with composition or metal seats, and a balanced

STEEL & O BRIEN MANUFACTURING

STEEL & O BRIEN MANUFACTURING VALVES, SIGHT GLASSES & SPRAY BALLS Don t See What You Need? We have more than 35,000 unique part numbers in our inventory. We ll be happy to help you find what you need or

Instrumentation Manifold Valves

Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3

pressure gauges Price List PGP-11 Effective 1/1/11 HOW TO SPECIFY A COMPLETE PRESSURE GAUGE MODEL NUMBER: 4510 S R 2 L 1 C6A G Dial Size/Model

Price List PGP-11 Effective 1/1/11 Thermometers Pressure Gauges Transmitters pressure gauges For complete how to order instructions see our Pressure Gauge brochure HOW TO SPECIFY A COMPLETE PRESSURE GAUGE

R115/R122 HOSE AND R105/R144 HOSE FITTINGS

SMOOTHBORE HOSE FITTINGS MEDIUM PRESSURE R115/R122 HOSE AND R105/R144 HOSE FITTINGS Brass 300 series stainless steel FEATURES: Swage or crimp attachment For use with: - R115/R122 (.030 wall hose) - R105/R144

3 PC FULL BORE BALL VALVE

Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working

PF6 Stainless Steel Piston Actuated On/ Off Valves

Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil

Product Catalog. Our Products. DCI Dynamic Instruments Website: dcidynamic.com

1 Product Catalog Our Products We at Dynamic are proud to present out new technical catalogue detailing our extensive range of Pressure Gauges, Thermometers, diaphragm seal, transmitter and accessories.

Valve Blocks. For direct flanging to pressure and differential pressure transmitters. Drop-forging housing. Replaceable valve seat

Data Sheet 10/14-5.32-EN Valve Blocks For direct flanging to pressure and differential pressure transmitters Drop-forging housing Replaceable valve seat Valve stem with back-flow seal and crimped valve

.187" Orifice PART NUMBER DESCRIPTION BONNET MATERIAL SEAT STEM SEAL

Options Bonnet Lock Plate Anti-Tamper Bonnet The Bonnet Lock Plate provides a more positive bonnet-locking device than the standard roll pin. The Anti-Tamper Bonnet Handle allows the bonnet stem to be

Mark 80. Self-Operated Temperature Regulators. Temperature Regulators Mark 80 Self-Operated Temperature Regulators FEATURES

Mark 80 Self-Operated Temperature Regulators The MK80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the valve. The operation of

TBM. Bi-Metal Thermometer

Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection

BCV Blowdown Control Valves DN15 to DN50 (½" to 2")

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

A Full Line of Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical, and Electronics Processing Industries PUMPS VALVES FITTINGS TUBING GAUGES

STC Manual & Actuated Process Valves

STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2

flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)

flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell

PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES

WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide PDF processed with CutePDF evaluation edition www.cutepdf.com 3 Piece Valves Triad Series Models FP/SP-2000/3000

Article on Sheath materials, Thermowells, Fittings, and Terminations

Article on Sheath materials, Thermowells, Fittings, and Terminations 1. INTRODUCTION Temperature sensor element for laboratory and industrial use should normally be protected by some form of sheath or

TBM. Bi-Metal Thermometer

Description & Features: A general purpose, versatile 1 (25mm) to 6 (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection

GVI Series Industrial Globe Valves for Flow Control

Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They

Security device Non return valve

Non return valve Design The DEFINOX non-return valve is made of 316L stainless steel with a surface finish of Ra = 0.8 µm. To disassemble, a fitting is required upstream. This valve uses a guided plug

Diaphragm seal with sterile connection With union nut (milk thread fitting) Models , , and

Pressure Diaphragm seal with sterile connection With union nut (milk thread fitting) Models 990.18, 990.19, 990.20 and 990.21 WIKA data sheet DS 99.40 for further approvals see page 7 Applications Food

CHECK-ALL VALVE. Horizontal-Vertical Flanged & Drilled HV page 5 page 9 page11. Wafer Insert WV. Connector CN CR. page15

CHECK-ALL VALVE Check-All Valve Mfg. Co. 1800 Fuller Road West Des Moines, IA 50265 U.S.A. Phone: 515-224-2301 Fax: 515-224-2326 Website: www.checkall.com E-mail: sales@checkall.com Introduction to Company

Natural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds

Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.

FIG. EA PIECE FIRESAFE BALL VALVES

FIG. EA-305 3-PIECE FIRESAFE BALL VALVES AGA-APPROVED MANUAL & AUTOMATIC FIG. EA-305 BALL VALVE FIGURE NUMBERING SYSTEM E A 305 F C X SE BS SW BW FL EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL

Description & Features: Applications:

Description & Features: Most economical, all-purpose pressure gauge.5" (40mm) to 4" (00mm) sizes Friction bezel rings Black steel case Brass internals ±3-2-3% accuracy CRN registered 5 year warranty Applications:

Diaphragm Seals TYPE12. Tri-Clamp Sanitary Pressure

Tri-Clamp Sanitary Diaphragm Seals TYPE12 Features a flush mount diaphragm and all welded construction, ideal for food & beverage, pharmaceutical and sanitary markets Wetted parts and all welded housing

Replacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016

A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00

Product Selection Guide Myers & Co., Inc...a company committed to quality and integrity

Product Selection Guide Myers & Co., Inc....a company committed to quality and integrity SERVICING PENNSYLVANIA, OHIO, WEST VIRGINIA, MARYLAND Myers & Co., Inc. is a specialty distributor of instrumentation,

1/8" to 1/4" female conn. Flow rates of 1 gpm and greater at 40 psi (3.8 lpm and greater at 2.8 bar)

VEEJET NOZZES FAT SPRAY OVERVIEW: VEEJET SPRAY NOZZES Flat spray pattern distributes the liquid as a flat- or sheet-type spray Uniform distribution over a wide range of flow rates and pressures Spray angles

Model S26 seals for remote and direct mount. 2600T Series Pressure Transmitters Engineered solutions for all applications

Data Sheet DS/S26-EN Model S26 seals for remote and direct mount 2600T Series Pressure Transmitters Engineered solutions for all applications All welded constructions combine an economically feasible and