R115/R122 HOSE AND R105/R144 HOSE FITTINGS
|
|
|
- Ezra Baker
- 5 years ago
- Views:
Transcription
1 SMOOTHBORE HOSE FITTINGS MEDIUM PRESSURE R115/R122 HOSE AND R105/R144 HOSE FITTINGS Brass 300 series stainless steel FEATURES: Swage or crimp attachment For use with: - R115/R122 (.030 wall hose) - R105/R144 (.040 wall hose) Back-up hex JIC (TK2) Attach withtk2 tooling Distributors may use their traditional swage tooling with quick swage fittings or use the more versatiletk2 fittings that may be swaged or crimped on both.03 wall (R115/R122) and.04 wall (R105/R144).TK2 is available in one- or two-piece versions. MALE PIPE 1 PIECE FITTING 2 PIECE FITTING SIZE IN. THREAD NOMINAL ID Y54104T-xxx Y54304T-xxx 1/4 1/ Y54104-xxx Y54304-xxx 1/4 1/ Y54105-xxx Y54305-xxx 5/16 1/ Y54106T-xxx Y54306T-xxx 3/8 1/ Y54106-xxx Y54306-xxx 3/8 3/ Y54108T-xxx Y54308T-xxx 1/2 3/ Y54108-xxx Y54308-xxx 1/2 1/ Y54110-xxx Y54310-xxx 5/8 1/ Y54112-xxx Y54312-xxx 3/4 3/ Y54116-xxx Y54316-xxx /2.812 Note the appropriate suffix: -93 = Brass -931 = Brass with QuikSwage Collar -95 = Stainless steel -951 = Stainless with QuikSwage Collar JIC FEMALE SWIVEL WITH BACK-UP HEX 1 PIECE FITTING 2 PIECE FITTING SIZE IN. THREAD NOMINAL ID Y54004-xxx Y54204-xxx 1/4 7/ Y54005-xxx Y54205-xxx 5/16 1/ Y54006-xxx Y54206-xxx 3/8 9/ Y54008-xxx Y54208-xxx 1/2 3/ Y54010-xxx Y54210-xxx 5/8 7/ Y54012-xxx Y54212-xxx 3/4 1-1/ Y54016-xxx Y54216-xxx 1 1-5/ Note the appropriate suffix: -93 = Brass -931 = Brass with QuikSwage Collar -95 = Stainless steel -951 = Stainless with QuikSwage Collar These products can be used to convey hazardous fluids, steam, and other dangerous materials which can cause personal injury or property damage if released through misuse, misapplication, or damaged. The user is responsible to analyze each application prior to specifying any product from this catalog. Due to the wide variety of operating conditions and applications, the user, through personal analysis and testing, is solely responsible for final product selection and meeting all performance, safety, and warning requirements. Careful selection, proper assembly and use of hose fittings and accessories is essential for the safe and warranted operation of the hose assembly. 6
2 R115/R122 HOSE FITTINGS SMOOTHBORE HOSE FITTINGS MEDIUM PRESSURE COMPRESSION TUBE END NOTE: Compression tube end inserts are type 316SS Y /4 1/4" O.D.Tube.156 Y /8 3/8" O.D.Tube.277 Y /2 1/2" O.D.Tube.358 Y /4 3/4" O.D.Tube.594 Y " O.D.Tube.812 SAE - FEMALE SWIVEL - STRAIGHT (45 SEAT) (UNIVERSAL) BRASS TWO-PIECE ONE-PIECE Y SAE 3/8 5/ Y SAE 3/8 5/ FEMALE PIPE BRASS Y Y /16 1/ SANITARY TRI CLAMP HOSE SIZE IN. FACE DIAMETER NOMINAL ID IN. Y
3 UNI-BRAID HOSE FITTINGS SMOOTHBORE HOSE FITTINGS HIGH PRESSURE JIC - FEMALE SWIVEL (37 SEAT) Y /4 7/ Y /8 9/ Y /2 3/ Y /8 7/ Y /4 1/ Y / Y /4 1-5/ Y /2 1-7/ ADAPTER - MALE JIC TO MALE PIPE 94364SS-4 1/8 27 7/ SS-4-4 1/4 18 7/ SS-6 1/4 18 9/ SS-6-6 3/8 18 9/ SS-8 3/8 18 3/ SS-8-8 1/2 14 3/ SS-10 1/2 14 7/ SS /8 18 7/ SS-12 3/4 14 1/ SS /2 1-5/ SS-20 1/4 11-1/2 1-5/ SS /2 11-1/2 1-7/
4 R154 HOSE FITTINGS SMOOTHBORE HOSE FITTINGS HIGH PERFORMANCE R154 HOSE FITTINGS R154 hose fittings also utilize the exclusivetiteflex progressive swaging method of attachment, with positive braid lock. All JIC wetted surfaces are type 300 stainless steel. R154 JIC-FEMALE SWIVEL (37 SEAT) Y /4 7/ Y /8 9/ Y /2 3/
5 FLEXIBLE PTFE HOSE CONVOLUTED R272/R276 AND R285/R287 HOSE FITTINGS Our selection of fittings enhances the value, the areas of application and convenience oftiteflex convoluted hose.with these fittings, most installation needs are easily met. Please consult us for any designs or applications not pictured here. Convoluted hose fittings feature the exclusivetiteflex progressive swaging method of attachment.when attached correctly, the innercore and insert form a permanent assembly. The positive braid lock assures that strain is absorbed by the braid, not the hose innercore, ensuring hose integrity. CRIMP ATTACHMENT: Hose may be crimped using numerous standard hose crimping machines. For information on this alternate method of attachment and appropriate applications, please consult us. Male pipe and female inserts are available in carbon steel and type 316 stainless steel. Collars for the preceding fittings are either carbon steel or type 304 stainless steel. Note: Carbon steel collars may be specified with stainless steel inserts, where only wetted surfaces require corrosion resistance. AVAILABILITY: Convoluted hose assemblies can be fabricated bytiteflex or authorizedtiteflex distributors.to assure factory-made reliability for distributor assemblies, our distributors are equipped withtiteflex-designed and approved field swaging tools. MALE PIPE CARBON STEEL Y Y /2 1/ Y Y /4 3/ Y Y /2.849 Y Y /4 1-1/4 11-1/ Y Y /2 1-1/2 11-1/ Y Y / JIC - FEMALE SWIVEL (37 SEAT) Y Y /2 3/ Y Y /4 1-1/ Y Y / Y Y /4 1-5/ Y Y /2 1-7/ Y Y / SANITARY FITTING SIZE IN. FACE DIAMETER NOMINAL ID IN. Y Y / Y These products can be used to convey hazardous fluids, steam, and other dangerous materials which can cause personal injury or property damage if released through misuse, misapplication, or damaged. The user is responsible to analyze each application prior to specifying any product from this catalog. Due to the wide variety of operating conditions and applications, the user, through personal analysis and testing, is solely responsible for final product selection and meeting all performance, safety, and warning requirements. Careful selection, proper assembly and use of hose fittings and accessories is essential for the safe and warranted operation of the hose assembly.
6 R272/R276 AND R285/R287 HOSE FITTINGS FLEXIBLE PTFE HOSE CONVOLUTED Titeflex stefzel encapsulated flange retaining inserts are now available in 1", 1-1/2" and 2"sizes.These fittings are manufactured using a base insert of nickel plated carbon steel. TheTefzel compound is injection molded around this base insert at high pressure.this high pressure injection molding results in a tough zero porosity plastic encapsulation which is highly corrosion resistant.the wall thickness on all wetted surfaces of the flange retaining insert is a minimum of.060". Flange retaining inserts are available in type 316 stainless steel, or with Halar coating. Tefzel encapsulated flange retaining inserts are available with a base material of nickel plated carbon steel. Collars for all styles are available in either type 304 stainless steel or plated carbon steel. Dependent on media, temperature capability of the encapsulated stub end is 250 F. Consult factory for detailed information on fluid capability and temperature rating. FLANGE RETAINING INSERT TEFZEL ENCAPSULATED TEFZEL ENCAPSULATED CARBON STEEL COLLAR SIZE IN. NOMINAL ID IN. Y H Y H Y H Y H 1-1/ Y H Y H FLANGE RETAINING INSERTS: & HALAR COATED HALAR COATED INSERT & COLLAR SIZE IN. NOMINAL ID IN. Y ContactTiteflex for Details 3/4.630 Y ContactTiteflex for Details Y ContactTiteflex for Details 1-1/ Y ContactTiteflex for Details
7 S818XX PTFE CHLORINE/BROMINE HOSE & HOSE OPTIONS FLEXIBLE PTFE HOSE SPECIALTY MONEL MALE NPT EACH END SPECIFICATIONS ASSEMBLY NOMINAL SIZE NOMINAL ID NOMINAL OD MAXIMUM OPERATING PRESSURE BURST PRESSURE ROOM TEMP MAXIMUM CONTINUOUS LENGTH MINIMUM BEND ROOM TEMP HOSE WEIGHT FITTING THREAD NPT in mm in in psi psi ft in lb/ft S81808-L 1/ , /2 14 S81816-L , /2 ALTERNATE END FITTING STYLE ASSEMBLY HOSE SIZE, IN. END FITTING L 1 MALE NPT & FLANGE* L 1 FLANGE X FLANGE S818XX PTFE CHLORINE/BROMINE HOSE * Flange retainer is Monel Schedule 80, MSS type A above piece construction with no welds. Flange is 300 lb. ASME forged steel. 17
FLEXIBLE TECHNOLOGIES GLOBAL COVERAGE TITEFLEX WARRANTY
FLEXIBLE TECHNOLOGIES TITEFLEX GLOBAL COVERAGE FLEXIBLE TECHNOLOGIES TITEFLEX CORPORATION 603 Hendee Street Springfield, MA 039-0054 T 43-739-563 T -800-765-2525 F 43-788-7593 WEST COAST TITEFLEX CORPORATION
R270 (510 SERIES): TITEFLEX R270 (510 SERIES) ENGLISH
TITEFLEX R270 (510 SERIES) SERI ES: 510 SPECIFICATION: None BRAID: Nomex INNERCORE: PTFE Convoluted QUALIFICATIONS : Qualified specific requirements. R270 (510 SERIES): 510 Series: low-pressure PTFE hose
BRAIDED HOSE WT/1/ HOSE OD (MAX)
TITEFLEX RA170 (220 SERIES) SERI ES: 220 SPECIFICATION: SAE AS1975, Class 3000 BRAID: Kevlar INNERCORE: PTFE Smoothbore QUALIFICATIONS : SAE AS1975, Class 3000 TSO-C75 Type II-S/P TSO-C75 Type IIB-S/P
Quicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
brands you trust. Design Manual PTFE Flexible Hoses
brands you trust. Design Manual PTFE Flexible Hoses Flanged Plastic Lined Pipe Resistoflex plastic lined pipe is made with a locked-in liner to minimize the adverse effects of differential thermal expansion
Midwest Flexible Hose Corporation
Midwest Flexible Hose Corporation Corrugated /nter/ocked Smoo& Bwe /nhr/ocked M FLOW Square L oded 7-e fon Midwest Flexible Hose Corporation 1-800-642-HOSE 3 Contents... Corrugated Metal Hose 4.. Standard
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
Carbon or stainless Steel
For Technical Assistance and Sales Contact: FlexEJ Ltd Tel: +44 (0) 1384 881188 Email: sales@flexej.co.uk Fax: +44 (0) 1384 896875 Web: www.flexej.co.uk Section 6 FLEXIBLE HOSES TYPE FSH SERIES METALLIC
Hose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV
Model AC Circuit Sentry Automatic Balance Hose Kits - Submittal Hose Kit Size Flow Range *MFR Qty. 1/2".33-14 5 3/4".33-14 11 3/4" 5-50 11 1".33-14 20 1" 5-50 20 1-1/4" 5-50 30 **1-1/2" 5-50 44 **1-1/2"
Manifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
A PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
GS-HYDRO INTERTRACO HOSES & CARBON STEEL COUPLINGS
GS-HYDRO INTERTRACO HOSES & CARBON STEEL COUPLINGS PRODUCT CATALOGUE INTERTRACO HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings
brands you trust. PTFE Flexible Hoses Industrial Hose Design Manual Crane ChemPharma & Energy
brands you trust. PTFE Flexible Hoses Industrial Hose Design Manual Table of Contents Introduction Convoluted Bore Hoses Smooth Bore Hoses Specialty Hoses Silicone Hoses Fittings & Accessories Technical
DIAPHRAGM SEALS. MHP SERIES MINI HIGH PRESSURE Mini diaphragm seal for pressures up to 6000 psi
DIAPHRAGM SEALS seals, also referred to as isolators or chemical seals, are used to protect instruments from viscous, corrosive or very high temperature process media. PIC stocks, fills and calibrates
Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
PTFE HOSE. Range 1.01 PTFE HOSE SMOOTH BORE PTFE HOSE Size : 1/8 to 1 1/8 Profile : Smoothbore Working Pressure : 5800 to kpa
01 1.01 Range SMOOTH BORE : 1/ to 1 1/ Profile : Smoothbore Working : 500 to 2300 kpa HIGH PRESSURE SMOOTH BORE PTFE : 1/4 to 1 1/2 Profile : Smoothbore Working : 27600 to 34500 kpa TAPE WRAPPED CONVOLUTED
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
Versilon Fluoropolymer Hose and Fitting Selection Guide
Versilon Fluoropolymer Hose and Fitting Selection Guide PROCESS SYSTEMS Saint-Gobain Versilon TM Fluoropolymer Hose and Fittings Table of Contents Versilon Fluoropolymer Hose Styles Rubber Covered Smooth
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
FAX: SPECIAL APPLICATION HOSES, METAL & TEFLON HOSES
Large Bore Teflon Fittings Selection Pipe Thread (NPT) Style 03 Flanges Lap Joint Flange Style 12 Shown with epoxy coated steel flange Cam and Groove Female Swivel Type Style 16 Also available Teflon Encapsulated
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
Ball Valves 2-Way Series
Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve
SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,
Ball Valves 2-Way Series
Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve
Check Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
Parker Fluid Control Angle Body Valves
Parker Fluid Control Angle Body Valves Angle Body Valve Key Features RED Position indicator on all models Housing is 304 SS standard, or optional Aluminum Piston ring FKM Brass Piston Pilot port available
Wire Reinforced Synthetic Rubber Hose Assemblies
Aeroquip Wire Reinforced Synthetic Rubber Hose Assemblies Lightweight and Flexible Qualified to Industry Standards Integral Abrasion and Fire Resistance Covers Available Aeroquip Wire Reinforced Synthetic
AUTOMOTIVE HOSE G611 FUEL LINE. Tube: Smooth, black, oil and gasoline resistant nitrile rubber.
& Truck HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures
Delivering powerful solutions.
Eaton Industrial Hose Master Catalog North America Delivering powerful solutions. Eaton Industrial Hose Products Table of Contents Section Pages Introduction A-2 A-12 Air and Multipurpose High B-5 B-8
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings which includes BSP, NPT, JIC, Metric, SAE 3000/6000 Flanges and
Product Selection Guide Myers & Co., Inc...a company committed to quality and integrity
Product Selection Guide Myers & Co., Inc....a company committed to quality and integrity SERVICING PENNSYLVANIA, OHIO, WEST VIRGINIA, MARYLAND Myers & Co., Inc. is a specialty distributor of instrumentation,
AUTOMOTIVE HOSE G611 FUEL LINE. Part Working Weight PRICE PER FOOT Standard Length I.D. Number O.D. Pressure per ft Cut Coil Reel Coil Reel
AUTO & TRUCK HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures
Schroeder Check Test Point System
Section 1: Introduction Schroeder Check test points provide a fast easy and safe way to test pressures up to 10,000 psi (680 bar) in hydraulic systems under operation. They are available in both 1620 (M16x20)
Flow Control Valves Check Valves Gauge Control Valves. Colorflow Valves
Check Valves Gauge Control Valves Colorflow Valves Colorflow and Ball Valves Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Ball Valves Fully guided poppets are used on
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
Pumpsaver. Form Follows Function. W A R R A N T Y. Standard Sizes
NEW! Pumpsaver Form Follows Function. Many believe that all braided pump connectors are the same, until you go to pick up the Pumpsaver. The Pumpsaver is manufactured with closed pitch hose making it an
Bimetal Thermowells Threaded
Bimetal Threaded Stepped Shank P P EXTERNAL THREAD [7] 2 1 / 2 only.75.75 [19] Lagging fl.50 Ø.50 [13] 1/2 P EXTERNAL THREAD P EXTERNAL THREAD [7] P P EXTERNAL THREAD THREAD.260 Ø.260 [7] [7].40.40 [10]
, ittings, Accessories, and Table of ontents How to Use This atalog / How to Order, ittings and Assemblies. : Hydraulic Braided 601, AX, 421, 482T/ST, BXX, 301, 431, 436, 381, 471T/ST, 472T, 451T/ST, 351T/ST;
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Auto-Couplings. For Multiple Connection Systems. Auto-Couplings
Auto-Couplings For Multiple Connection Systems Auto-Couplings 2 Auto-Couplings For Multiple Connection Systems Minimized Down-Time The automation process going on in most industries requires more sophisticated
HOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
TOOLFLEX HTMA PRODUCTS CATALOG. 901 E Jefferson St. Bensenville, Illinois Phone: Fax:
TOOLFLEX 901 E Jefferson St. Bensenville, Illinois 60106 Phone: Fax: 847-455-4559 HTMA PRODUCTS CATALOG TOOLFLEX LOW TWIN NON-CONDUCTIVE HOSE ASSEMBLIES This hose is designed for hydraulic tool applications
Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
B R E N N A N c a t a l o g
B R E N N A N c a t a l o g $ 15 00 Dear Valued Customer: We are pleased to present our hydraulic tube fitting and adapter catalog. Since 1953, Brennan Industries, Inc. has been supplying hydraulic tube
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4
General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
UNIFLEX. Flexible Solutions for the Universe... Hose & Tube Assemblies Fittings Adapters Fuel Injection Pipes Fabrication Sub Assemblies
Flexible Solutions for the Universe... Hose & Tube Assemblies Fittings Adapters Fuel Injection Pipes Fabrication Sub Assemblies Universal Flex ibles Pvt. Ltd. (), is an ISO/TS 16949-2009 certified company
Connection 1 Connection 2 ft m in mm psi bar in mm
RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability, and safe performance at an economical price.. Constructed with four spiral layers of high tensile
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
your single source supplier Flexible Products for HVAC Applications
your single source supplier Flexible Products for HVAC Applications Your single source for flexible connectors and expansion joints Unisource is your single source for all types of flexible connectors
PYPLOK System It s the weldless, threadless way to join pipe/tube
The Tube-Mac PYPLOK System It s the weldless, threadless way to join pipe/tube Leakfree performance, reduced installed cost and minimised downtime The Tube-Mac PYPLOK connecting system is sparkless and
quality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
INDEX HOSES. Metal Hoses. SHU Series Ultra high pressure series Page 459. SHV Series Vacuum/Formable series Page 460
HAMLET INDEX HAMLET METAL 456 SELECTING & INSTALLING METAL HOSE ASSEMBLIES 463 METAL ORDERING INFORMATION 468 HAMLET PTFE GENERAL 470 PTFE ORDERING INFORMATION 475 Metal Hoses SHF Series General use series
FOUR SERIES OF CHECK-ALL VALVES
INSERT HOUSED TUBING MINI-CHECK FOUR SERIES OF CHECK-ALL VALVES For nearly every possible application and need, you can economically install a Check- All valve. Lightweight, efficient, and rugged, every
EXHAUST / DEF. > Differential Pressure Sensor Tubing 4040T...Silicone tubing, unreinforced...92
EXHAUST / EXHAUST / > Diesel emissions fluid () for SCR systems 4202...Heated line for injection / return...78 4217IS...Bulk length transfer and tank filler / vent...78 4256PC...Formed tank filler / vent
"S" Series Needle/Gauge Valves
"S" Series Needle/Gauge Valves Autoclave Engineer s S Series needle and gauge valves have been engineered to provide reliable service and versatility in meeting specific process requirements. Valve heads
TRANSMITTER ATTACHES TO THIS SURFACE
FIELD DEVICES - PRESSURE Product Specifications Logo PSS 3-5A1 B Model IFOA Integral Flow Orifice Assembly Used with I/A Series or Pneumatic d/p Cell Transmitters PNEUMATIC TRANSMITTER TRANSMITTER ATTACHES
Flexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake
INDEX Section Pages Hose Section 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Pages Section Pages Swivel Joints 229-244 Quick Disconnect Couplings 268-345 Flexmaster Joints 245-260 Access.,
Oil and Gas Products Pressures to 30,000 psi
Oil and Gas Products MAXIMATOR has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability. Oil
SC2000 Series Stainless Steel, 500 PSI Check Valves
Sinclair Collins Stainless Steel, 500 PSI Bulletin SC2000-C/USA Climate & Industrial Controls Features & Specifications Features Simple 3-piece design Piston type stem Investment cast 316 stainless steel
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
Iron Gate Air Pump System Manual
Iron Gate Air Pump System Manual Installation and Operating Instructions Iron Gate Iron Filter System Manufactured by: R.E Prescott Co., Inc. 10 Railroad Avenue Exeter, New Hampshire 03833 Phone: (603)
Hand Beading Tool.12 Hand Tube Bender.13 EZ-Beading Tool.14 PTFE Tape & Paste...15 Pressure Test Kit.15 Aluminium Wrenches.16 Aluminium Vice Jaws.
Table of Contents Fabrication Parts Male Weld-on Adapters 2 Female Weld-on Adapters...2 Aluminium Weld Bends 3 Alloy Bends.... 3 Wiggins Weld-on Adapters..4 Wiggins Connectors.5 Cores..6 Radiator Necks..7
Product Catalog. Our Products. DCI Dynamic Instruments Website: dcidynamic.com
1 Product Catalog Our Products We at Dynamic are proud to present out new technical catalogue detailing our extensive range of Pressure Gauges, Thermometers, diaphragm seal, transmitter and accessories.
Welcome to JDM Industrial Maintenance Inc.
Welcome to JDM Industrial Maintenance Inc. We are an experienced and innovative company which has been serving the City of Peterborough and the surrounding areas since 98. Our diverse skills and resources
2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.
General Service Valves Brass Body 1/" to 2" NPT 2/2 3/2 /2 Features Unique sealing member isolates pilot air pressure from mainline fluid Variations in pilot air pressure do not affect valve operation
brands you trust. Design Manual Crane ChemPharma & Energy
brands you trust. Design Manual Overview Flanged Plastic-Lined Pipe CRANE ChemPharma, Resistoflex plastic-lined pipe is made with a locked-in liner to minimize the adverse effects of differential thermal
Product Information Report Industrial Hose: Multipurpose Air and Water Hose
Overview and Water Hose is primarily used to either provide air to power tools such as grinders, sanders and jackhammers, or to provide water to washdown equipment such as cement mixers, and to provide
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
Dixon Sanitary General Products. dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU General Products dixonvalve.com Customer Service: 877.963.4966 : maintaining the standard of quality The
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
Aeroquip. Aluminum Compression Crimp Fittings
Aeroquip Aluminum Compression Crimp Fittings Table of Contents 666/667 Medium Pressure PTFE Hose and Aluminum Compression Crimp Fittings... 2 Aluminum Crimp Fittings... 3 Flared Fittings... 4 Flared Fitting
Armstrong Steam Filters (ASF)
Armstrong Steam Filters (ASF) Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit for up-to-date information. 1 Contents ASF Steam Filter Housings......................
VACUUM AND CHARGING HOSES
VACUUM AND HOSES RECOVERY YELLOW JACKET HVAC&R VACUUM SUPEREVAC AND HOSES YELLOW JACKET PLUS II Charging Hoses Double barrier protection for CFC, HCFC and HFC refrigerants 20 EDITION 62 CATALOG RECOVERY
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
CHECK-ALL VALVE. Horizontal-Vertical Flanged & Drilled HV page 5 page 9 page11. Wafer Insert WV. Connector CN CR. page15
CHECK-ALL VALVE Check-All Valve Mfg. Co. 1800 Fuller Road West Des Moines, IA 50265 U.S.A. Phone: 515-224-2301 Fax: 515-224-2326 Website: www.checkall.com E-mail: sales@checkall.com Introduction to Company
Miscellaneous Plumbing
Manifolds Manifolds Four different styles to work in your par ticu lar system. SAE straight thread o-ring ports used exclusively to provide drip free hydraulic connections. High strength steel, careful
660R-RAC Series. Gasoline Fuel Filter/Water Separators. Overview: Contact Information: Product Features: Instruction Part Number Rev F
660R-RAC Series Gasoline Fuel Filter/Water Separators Instruction Part Number 1385 Rev F Overview: Don t be caught in the water without one of these Racor gasoline spin on series filters. These filters
Ball Valves (B Series) Catalog 4121-B September 1999
Ball Valves (B Series) Catalog 4121-B September 1999 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick 1/4 turn
International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc. www.isvalve.com
WEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
Colorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
FLUOR-O-FLO Dip Pipes & Spargers. PTFE Lined and Jacketed Steel
MICROMOLD TM ENGINEERED PLASTIC FLUID-FLOW PRODUCTS Product Specifications 5.1-2 FLUOR-O-FLO Dip Pipes & Spargers PTFE Lined and Jacketed Steel CONTENTS PAGE DDF Double d Dip Pipes... 2 DSF Single d Dip
FROM SIMPLE TO COMPLEX DESIGNS. Flo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications
SG-2013 BALL VALVES FROM SIMPLE TO COMPLEX DESIGNS Sanitary Valves Cryogenic Valves Automated Valves Fusible Link Valves Cavity Filled Valves V-Port Control Valves Dribble Control Valves Instrumentation
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
Sample Probe Module. Application Guide
Sample Probe Module Application Guide A Swagelok Pre-Engineered Subsystem Pre-engineered subsystems available in weeks, not months. Field-tested design ensures optimum system performance. Wide range of
DY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动
DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents
HVAC. Products. TRI A FLO Automatic Cartridges PAGE 2. TRI Y FLO Strainer PAGE 3. TRI U FLO Accessory Union PAGE 4. CB Series Butterfly/Venturi PAGE 5
HVAC TRI A FLO Automatic Cartridges TRI Y FLO Strainer TRI U FLO Accessory Union Products Automatic balancing valves.5 thru 108.0 in Brass, Stainless, PVC, CPVC, Titanium, Ceramic, Monel, and more PAGE
Neoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
Coriolis Mass Flowmeter for low flow measurements
RHM 03 - Flexible Coriolis Mass Flowmeter for low flow measurements The RHM 03 can measure flow rates up to 5 kg/min (11 lb/min) with temperatures in excess of 400 C and pressures to 868 bar. This model
Couplings, hose clamps and pneumatics
Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)...
GLASS LEVEL GAUGES. Reflex Transparent Bicolour
GLASS LEVEL GAUGES Reflex Transparent Bicolour INDEX Page General Information...3 Types, Material Schedules and Applications...4-5 Reflex Level Gauges type BR14-G11 & GP11...6 type BR12-G11, G12, GP11
Bulletin B Reflex Transparent Bicolour
Bulletin B 06-09 GLASS LEVEL GAUGES Reflex Transparent Bicolour INDEX Page Page General Information...3 Bicolour Level Gauges type BC24, BC28, BC33, BC32 with GP11, GP12, G41, G42, GS41 & GS42...24 type
Section H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.