Quicklub Lubrication Systems Fittings, Adapters and Accessories

Transcription

1 Divider Valve Mounting Accessories Valve mounting bracket " nylon locknut for valve mounting Grade 8, 4" valve mounting bolt Template for divider valve mounting (6, 8, 0 and 2 outlet valves) Valve mounting block for welding mm bolt to be used with the Standard Compression Fittings for Steel or Nylon Tubing " tube x 8" NPT male straight fitting " tube x 8" NPT male 90 fitting Divider Valve Outlet Adapters for 4" O.D. Steel or Nylon Tubing Compression-Style With Check Valve Ferrule 4" Compression nut Check valve body Clamping ring Divider Valve Outlet Adapters for 4" O.D. Steel or Nylon Tubing Compression-Style Without Check Valve Compression nut Compression nut (stainless steel) Ferrule Divider Valve Outlet Adapters for 8" I.D. Hose Clamping ring Valve outlet adapter with check ( 8" NPT female) Valve outlet adapter without check ( 8" NPT female) For SSVM Valves Compression Fitting Material Feed Line Connection 32 Compression nut 8" Adapter Steel or Brass Ferrule Nylon Check valve body Tube NOTE: Quicklub adapters without check valves are for use in manual systems where lubricant is supplied from hand grease guns or pneumatic powered lever guns. Quicklub adapters with check valves are for use in all automated systems. 23

2 Zerk-Lock and Quicklinc Make Connecting Fast Quicklinc line connectors and adapters link metering valves and flexible lubrication lines. Outlet adapters with check valves are used in automated systems, while models without a check valve are used in manual systems called single point kits where a divider valve connected to several lubrication points is fed with a grease gun. The Quicklinc tube splicer union is a great way to fix a broken line without replacing the whole line. Just clean the line ends, plug them into the connector and the line s repaired. Quicklinc lube point connectors are ideal when fittings can be removed easily. All three varieties straight, 90-degree elbow and elbow swivel connect much faster than using a typical screw connector, which requires assembly of four components. Zerk-Lock is Lincoln s other great time-saving connector. When removing a fitting is not practical, the Zerk-Lock grease fitting adapter is the answer. It connects any 8-inch male tube adapter directly to a grease fitting. Even when a fitting is self-tapered or pressed in, there s no need to drill it out and tap new threads with Zerk-Lock a tremendous time saving. Quicklinc and Zerk-Lock are designed to work well together. It s as simple as:. Install a Quicklinc into the divider valve and insert the line 2. Place a Zerk-Lock onto the fitting 3. Seal and tighten Zerk-Lock using a hammer and staking tool 4. Then thread a Quicklinc completely into the Zerk-Lock 5. And plug the tube into the Quicklinc adapter Quicklinc Push-In Style Fittings for Nylon Tubing " tube x 8" NPT male straight fitting " tube x 8" NPT male 90 fitting " tube x 8" NPT male 90 swivel fitting " tube x 4" -28 male 90 swivel fitting " tube x 4-28 male 90 fitting " tube x 8-28 male straight fitting " tube x 6 mm male 90 fitting " tube x 6 mm straight fitting " tube x 4" tube splicer union Divider Valve Outlet Adapters for 4" O.D. Nylon Tubing Quicklinc Push-In Style Valve outlet fitting with check Valve outlet fitting without check Divider Valve Outlet & Inlet Adapters for 8" I.D. Hose Quicklinc Push-In Style with Check Valve outlet fitting with check ¹ ₄" tube x 8" NPT male straight fitting IMPORTANT: Use the valve adapters for connecting the 8" high pressure hose (incl. hose stud with groove) to the main divider valve. The collet of the adapter is not knurled and has a wide collar Protective Quicklinc rubber boot 24

3 Divider Valve Outlet Closure Plug Valve outlet closure plug (gasket not required) Stainless steel outlet closure plug (gasket not required) 8" Supply and Feed Line Hose Lube Nominal Size Minimum Min. Working Bending Construction Burst Pressure I.D. O.D. Radius 0,000 psig 4000 psig 8" 5 6" 3 2" Nylon Tube Dacron Braid 690 bar 276 bar Polyurethane Cover ft. (7.92m) coil grease filled ft. (0.66m) coil grease filled ft. (2.9m) coil grease filled ft (60.96m) coil non-grease filled Hose Ends for Use with Quicklinc Fittings Hose stud, 90 (to be used with ) Hose stud, straight (to be used with ) Threaded sleeve Stainless steel hose stud sleeve Stainless steel straight hose Hose Ends for 8" I.D. Hose " NPT swedge on hose stud (requires swedging tool) " NPT field installable hose coupling (swedging tool not required) Hose End Connecting Tools Swedge tool for field installation of Model Hand vise for quick connect and reusable hose ends Feed Line Nylon Tubing O.D. Wall Thickness Working Pressure Minimum Bending Inches in. / mm psig bar in. / mm 4".050 / / ft. (7.62m) coil grease filled ft. (5.24m) coil grease filled ft. (30.48m) coil non-grease filled ft. (52.40m) coil non-grease filled O.D. Wall Thickness Working Pressure Minimum Bending Inches in. / mm psig bar in. / mm 4".062 / / ft. (7.62m) coil grease filled ft. (5.24m) coil grease filled ft. (30.48m) coil non-grease filled ft. (52.40m) coil non-grease filled 25

4 Steel Tubing Model Size (O.D. x Wall) Working No. O.D. Wall Length Pressure Type ".020" 25 ft/7.6 m 4400 psig/300 bar Coil Nylon Tubing Model Size (O.D. x Wall) Working Min. Bend No. O.D. Wall Length Pressure Radius ft/7.6 m ".026" 00 ft/30.5 m 625 psig / 42.5 bar.375" ft/52 m Style Style 2 Style 3 Style Style 2 No Pipe Thread Adapters Model No. Style A B C D E F G NPTF 90 8 NPTF hex 4-28 Taper 8 NPSF sq Taper 90 8 PTF Bulkhead Adapters Metric Adapters 2 sq. 8 PTF 45 8 PTF 2 sq. 8 PTF 90 8 PTF Taper 45 8 NPTF Style A B C D 354 8" PTF 2" 4" " " PTF 2" 4" -28 4" " PTF 2" 4" " 5055 Lock Nut 8" NPSM thread Fittings, Adapters and Installation Accessories 030 8" NPT male x 8" NPT male nipple 08 8" NPT male x 8" NPT female adapter, 7 8" long 082 8" NPT male x 8" female adapter, 5 6" long outlet 8" NPT x 8" NPT junction block outlet 8" NPT x 8" NPT junction block 8583 Junction block, 8" NPT 4570 Anchor block Street tee, 8" NPT female run mm male x 8" NPSF female straight mm male x 8" NPSF female " BSPT male x 8" NPT female thread Grease Fittings " NPT threaded straight leakproof fitting Plastic grease fitting cap 26

5 Zerk-Lock Grease Fitting Adapter Connects any 8" NPTF male tube adapter directly to a standard grease fitting. Aluminum, carbon steel construction; fluorocarbon elastomer seal. Dimensions Thread A B C-Hex in. mm in. mm in. mm " NPSL Female Note: Zerk-Lock, with a straight female thread, is designed to accept a tube connector with a tapered male thread. This tapered to straight thread engagement is required for secure seal Staking tool for the Zerk Lock fitting Swivels " NPT male x 8" NPT female 90 swivel " NPT male x 8" NPT female straight swivel Street Tee " NPT male x 8" NPT female x 8" NPT female Adapter Unions and Locknuts " NPT male x 8" NPT female swivel adapter union " NPSM locknut utilized for remote ¹ ₈" I.D. hose bulkhead connections Installation/Assembly Tools Plastic tube and hose cutter (formerly 24237) Replacement blade for Swedging tool for field installation of Model Hand vise for quick connect and reusable hose stud installation 27

6 System Finishing Accessories 240 Feed line bundling spiral wrap (0 ft./3m length) feet/6m of spiral wrap Nylon ties (50 count poly bag) Nylon ties (00 count poly bag) feet/6m of 3 8" split wrap feet/6m of 2" split wrap feet/6m of 5 8" split wrap Pump Mounting Bracket and Hardware for 203 Series and QLS 300 & 400 Series Pumps Pump mounting bracket for 203/30/40 Series pumps mm x 2" long grade 8 bolt for pump bracket Pump and primary valve mounting bracket Stand Offs for Mounting SSV Valves, P-Clamps and Angle Iron Divider valve mounting block mm bolt to be used with the mm round stand off mm square stand off mm x 5 8" long bolt to be used with and mm round stand off mm x 5 8" long bolt to be used with