Transcription

1

2

3

4

5

6

7 , ittings, Accessories, and Table of ontents How to Use This atalog / How to Order, ittings and Assemblies. : Hydraulic Braided 601, AX, 421, 482T/ST, BXX, 301, 431, 436, 381, 471T/ST, 472T, 451T/ST, 351T/ST; Hydraulic Spiral 341, N, 721, 721T, 772T/ST, 781, 78, 782T/ST, 791T, 792T/ST, 701, 731; Hydraulic Specialty 604, 804, 424, 304, 774, 821R, 421W, 426, 301LT, JK, 811 and 881; Pneumatic 801, 821, 831, 836, 821R and 804; Engine/Air Brake/Marine/Gas 213, 293, 201/261, 206, 266, 225, 221R, SS23G and SS25UL; Air onditioning 285, 244 and A ittings: Parkrimp 26, 43, 70, 71, 73, 78, 79, 81, and HY Series ittings and ield Attachable 20, 21, 22, 23, 30, 42, 82, 88, and TB Series ittings, Assembly Instructions,...B Parkrimp rimping : MiniKrimp, Karrykrimp 2, Parkrimp 1, PHastkrimp, Parkrimp 2, Parkrimp onversion Kits, Parkrimp Tool Selection harts, Parkrimp Assembly Instructions, Insertion Depths and rimp Diameters... Assembly : Production rimper, ut-off Machines, Insertion Depth Blocks, itting Push-On Stand, Die Storage Racks, ield Attachable itting Assembly, Lubrication Oil, Mandrel Tool Kits, and Hydraulic & low apacity Guide... D Adapters: Seal-Lok O-Ring ace Seal, Triple-Lok JI 37 lared, Pipe itting and Port, JIS / Metric, SAE 45 lare, Straight Thread, SAE lareless, Pipe Swivel, 37 lare to High & Low Pressure lange (T3 & H3), BSP, and JIS...E Accessories: lange & lange Kits, O-Rings, Guards, lamps, & itting Bins, Assembly Workstations, and Quick Disconnect ouplings... Appendices: hemical Resistance Information, Standards & Specifications for, ittings & Adapters, Pressure Rating Tables & harts, End onfiguration Torque Values, itting End onfiguration Tables, Metric onversion Information, Installation Tips, errule-ix Assembly Instructions, International Sales Subsidiaries, Safety Guide, Numerical Index, itting Hex, Thread & lare Size harts, and Offer of Sale Statement... G I A Appendices Accessories Adapters ittings B Parkrimp rimping Assembly D E G vii Products Division Parker Hannifin orporation Wickliffe, Ohio

8 I, ittings, Accessories and How to Use This atalog The Table of ontents is on page vii. A Appendices Accessories Adapters ittings B Parkrimp rimping Assembly D E G If you know the Parker Products Division part number, see the Part Number Index on pages G-37 through G-42 for specific part number to page number listing. If you know the type of part, see the Table of ontents on page vii OR reference the visual index on the 1st page of each section of the catalog. The Parker itting End onfiguration list starts on page G-25. The list identifies the catalogued fittings by end configuration description, HPD fitting code and fitting series. The Parker part number system for, ittings and Assemblies is explained on pages ix xii And, the Parker part number system for and ittings is explained on pages B-3 and B-4. The Parker and itting information tables have international symbols as columnheads. The symbols and their meaning are noted below. SYMBOL # DEINITION Part Number Inner Diameter Outer Diameter Working Pressure Burst Pressure Minimum Bend Radius Weight SYMBOL DEINITION Vacuum Rating Parkrimp itting ield Attachable itting lange End Thread Size Hex Size Diameter I YOU HAVE QUESTIONS ONERNING THE PRODUTS OR APPLIATION O THE PRODUTS ONTAINED IN THIS ATALOG, PLEASE ONTAT: PARKER HOSE PRODUTS DIVISION PHONE: 440 / AX: 440 / Extra care is taken in the preparation of this literature but Parker is not responsible for any inadvertent typographical errors or omissions. Information subject to change without notice. The information in this catalog is only accurate as of the date of publication. or a more current information base, please consult the Parker Products Division website at. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin orporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions in the "Offer of Sale." viii Products Division Parker Hannifin orporation Wickliffe, Ohio

9 , ittings, Accessories and How to Order and ittings. II ittings Part Number Type 2 2 = ield Attachable itting 3 = Push-Lok itting How to Order ield Attachable ittings ittings are ordered by part number as listed in this catalog. Example: onfiguration Series itting onnection Size Size of onnection itting Material itting end configuration code listing is in Section G, pages G-24 thru G-31. A "06" end is a emale JI 37 -Swivel- Straight. How to Order When ordering hose, specify complete information as illustrated below. Examples: 50 t (bulk hose) and 1 piece of inches (exact cut lengths) Description Quantity Type Size of onnection ut Length in Inches 50 eet Always specify in inches. Specify in feet, total length of hose required when ordering bulk hose. -OR- Specify length in inches with number of pieces if cut lengths are required. 20 for for for for for for for 82-3=3/16-12=5/8-4=1/4-16=7/8-5=5/16-20=1-1/8-6=5/16-24=1-3/8-8=13/32-32=1-13/16-10=1/2-40=2-3/8-48=3 Size of SAE 100R5 Type hose is nominal. -3=3/16-12=3/4-4=1/4-16=1-5=5/16-20=1-1/4-6=3/8-24=1-1/2-8=1/2-32=2-10=5/8-40=2-1/2-48=3 Size of SAE 100R5 Type hose is nominal. Use only if exact cut lengths are required. No suffix = Steel B = Brass = 316 Stainless Steel BA = Brass Nipple w/ Steel Nut & Socket BS = Brass Nipple w/ Brass Nut & Steel Socket Defined by type of end connection, i.e. thread, flange, tube, banjo, etc. See part number table. A Appendices Accessories Adapters ittings B Parkrimp rimping Assembly D E G ix Products Division Parker Hannifin orporation Wickliffe, Ohio

10 I, ittings, Accessories and How to Order ield Attachable ittings. A How to Order omponents of ield Attachable ittings Sockets and nipples can be ordered separately and will be shipped separately when ordered as follows: Example: Socket = Nipple = Socket Part Number is Type 2 onfiguration Series Size of onnection -12 itting Material Appendices Accessories Adapters ittings B Parkrimp rimping Assembly D E G 2 designates ield Attachable type fitting. itting end configuration code listing is in Section G, pages G-24 thru G-31. "00" designates socket only Nipple Part Number is onfiguration 06 Series for for for for for for for for 88 TB for TB 20 for for for for for for for 42 itting onnection Size -12 Defined by type of end connection, i.e. thread, flange, tube, banjo, etc. See part number table. -3=3/16-12=3/4-4=1/4-16=1-5=5/16-20=1-1/4-6=3/8-24=1-1/2-8=1/2-32=2-10=5/8-40=2-1/2-48=3 Size of SAE 100R5 Type hose is nominal. Size of onnection -12-3=3/16-12=3/4-4=1/4-16=1-5=5/16-20=1-1/4-6=3/8-24=1-1/2-8=1/2-32=2-10=5/8-40=2-1/2-48=3 Size of SAE 100R5 Type hose is nominal. No suffix = Steel B = Brass = 316 Stainless Steel BA = Brass Nipple w/ Steel Nut & Socket BS = Brass Nipple w/ Brass Nut & Steel Socket itting Material No suffix = Steel B = Brass = 316 Stainless Steel BA = Brass Nipple w/ Steel Nut & Socket BS = Brass Nipple w/ Brass Nut & Steel Socket x Products Division Parker Hannifin orporation Wickliffe, Ohio

11 , ittings, Accessories and How to Order Parkrimp (crimp) itting Assemblies. I How to Order Parker Assemblies with Parkrimp (crimp) ittings The following example illustrates how to order a hose assembly using 1/2" I.D. 301 hose, with 1/2" female SAE (JI) 37 swivel straight fitting on one end and a 1/2" female SAE (JI) 37 - swivel - 90 elbow fitting on the other end. Overall length is 24". Example: 301** " Assembly Part Number Prefix = Parkrimp (crimp) fittings, i.e. 43, 70, 71, 73, 78 or 79 Series. P = Parkrimp (crimp) fittings, e.g., 26 Series. Y = Permanent (crimp) fittings, e.g., HY Series. K = Permanent (crimp) fittings, e.g., 81 Series. Type End onfiguration ittings onnection Size ittings 1st End 2nd End 1st End 2nd End Size Material 301** Above information is defined in the corresponding shaded area of the How to Order Only and/or How to Order itting Only section(s). In this example, 301 hose is being used. 301 hose requires the use of 43 Series Parkrimp fittings - this explains why is the hose assembly prefix. When adapters, firesleeves or other combination of accessory parts are required for the hose assembly, they must be specified in the part number. Examples: 301** " with full length Spring Guard. The part number is 301** " with SG ". (The SG length equals the hose assembly Over All Length (OAL) less fittings overall length the "A" dimension in the fitting table). The ** allows hose to be entered that is five characters in length. or example, if you require 451T hose instead of 301, the assembly would be 451T If a pre-made hose assembly is required with a non-hpd accessory part, please contact Parker Hannifin, G, Kit Division, 1290 Waterville-Montclova Road, Waterville, OH, , PH: (419) , AX: (419) (See /value added services/ for more Kit Division information.) 301** " OAL The Assembly Part Number is 301** ". The Part Number is The itting Part Number - 1st end configuration - is The itting Part Number - 2nd end configuration - is Overall Length -24 Expressed in INHES. When expressed in MILLIME- TERS, note length followed by "mm" (eg. 610 mm). If elbow fittings are used, overall length is measured from centerline of fitting seat. Displacement Angle Specified only if two elbow fittings are used. Starting with either end as the far end, measured the angle clockwise to describe the displacement of the near end. Note: The Over All Length (OAL) of the Seal-Lok hose assembly is measured to the sealing surface of straight fittings or to the centerline of elbow fittings. 270 AR END NEAR END A Appendices Accessories Adapters ittings B Parkrimp rimping Assembly D E G xi Products Division Parker Hannifin orporation Wickliffe, Ohio

12 I, ittings, Accessories and How to Order ield Attachable itting Assemblies. A Appendices Accessories Adapters ittings B Parkrimp rimping Assembly D E G How to Order Parker Assemblies with ield Attachable ittings The following example illustrates how to order a hose assembly using 13/32" I.D. 201 hose, with 3/8" male pipe fitting on one end and a 3/8" female SAE (JI) 37 swivel-straight fitting on the other end. ittings are non-mandrel style. Overall length is 24". Example: R201** " Assembly Part Number Prefix R R = ield Attachable ittings, i.e., 20, 21, 30, 42, 82 or TB Series. M = Mandrel style 22 and 23 Series B = 88H-H clamp on 88 Series = 88H worm gear clamp on 88 Series Type End onfiguration ittings onnection Size ittings 1st End 2nd End 1st End 2nd End Size Material R201** Select data from above by referencing its corresponding shaded area in the How to Order and/or How to Order itting section. In this example, 201 hose is being used. 201 hose can use 20 Series ield Attachable ittings - this explains why R is the hose assembly prefix. When adapters, firesleeves or other combination of accessory parts are required for the hose assembly, they must be specified in the part number. Examples: R201** " with full length Spring Guard is R201** " with SG " (The SG length equals the hose assembly Over All Length (OAL) less fittings overall length the "A" dimension in the fitting table). The ** allows hose to be entered that is five characters in length. or example, if you required 301LT hose instead of 201, the assembly would be R301LT If a pre-made hose assembly is required with a non-hpd accessory part, please contact Parker Hannifin, G, Kit Division, 1290 Waterville-Montclova Road, Waterville, OH, , PH: (419) , AX: (419) (See /value added services/ for more Kit Division information.) R201** " OAL The Assembly Part Number is R201** ". The Part Number is The itting Part Number - 1st end configuration - is The itting Part Number - 2nd end configuration - is Overall Length -24 Expressed in INHES. When express in MIL- LIMETERS, note length followed by "mm" (eg. 610 mm). If elbow fittings are used, overall length is measured f r o m centerline of fitting seat. Displacement Angle Specified only if two elbow fittings are used. Starting with either end as the far end, measured the angle clockwise to describe the displacement of the near end. Note: The Over All Length (OAL) of the Seal-Lok hose assembly is measured to the sealing surface of straight fittings or to the centerline of elbow fittings. 270 AR END NEAR END xii Products Division Parker Hannifin orporation Wickliffe, Ohio