BRASS FITTINGS and Related Products

Size: px
Start display at page:

Download "BRASS FITTINGS and Related Products"

Transcription

1 Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake 6 Air Brake Fittings: Copper Tubing 7 Pipe Fittings 9 Bulkhead Couplings 11 SAE 45 Flare Fittings 12 Compression Fittings 14 Push-In Fittings 16 Poly-Tube Fittings 17 Inverted Flare Fittings 18 Threaded Sleeve Fittings 20 Poly-Air Hose Assemblies 20 Ground Plugs & Shut Off Valves 21 Drain Cocks & Needle Valves 22 Push-Lock Hose Ends 23 Multibarb Hose Ends 25 Hose Clamps and Ferrules 27 Low Pressure Hose Crimpers 28 Hose & Tubing 29 Tools for Metal & Plastic Tubing 34 Limited Warranty 35 ph: fax: Tulip Street PO Box 9580 Philadelphia, PA 19124

2 Air Brake Fittings: Nylon Tube Meets SAE and DOT specifications Use with NT3100 Nylon Tubing Size Guide Dash Tube Thread -04 1/ / / / / Sleeve Ref. SAE # $ $ $ $ $ Nut Ref. SAE # $ $ $ $ $ Union 1-Tube 2-Tube Ref. SAE # BA $ $ $ $ $ Union Tee 1-Tube 2-Tube 3-Tube Ref. SAE # BA $ $ $ $ $ $ $ $ Union Elbow 1-Tube 2-Tube Ref. SAE # BA $ $ $ $ Female Connector 1-Tube 2-FP Ref. SAE # BA $ $ $ $ $ $ $ $ $ Male Connector Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $8.42 1/2" Teflon Tape Meets military spec: MIL-T-27730A TTA50 260" $.60 TTB50 520" $.92 Teflon Paste Temp. range: -300 to 500 F LCTS14 ¼ pt $9.94 LCTS1 ½ pt $14.47 LCTS2 1 pt $22.68 Plastic Tube and Hose Cutter Cuts plastic tubing and hose up to 1/2" OD. Mounts on bench or wall. Designed to close automatically for safety when not in use. Not for use with wire-reinforced hose. DT191 Plastic Tube Cutter $11.59 DT191B Replacement Blade $ Cat. BR602 Order Toll-Free:

3 Air Brake Fittings: Nylon Tube Meets SAE and DOT specifications Use with NT3100 Nylon Tubing Male Elbow Female Elbow Male Branch Tee Male Elbow Ref. SAE # BA 1-Tube 2-FP Ref. SAE # BA 1-Tube 2-Tube 3-MP Ref. SAE # BA Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Male Run Tee $ $ $ $ $ $ $ $ $ $ Union $ $ $ $ $ $ $ $ $ Adapter Tee L 90 Male Elbow Long L $ L $ L $ Tube Ref. SAE # BA $ $ $ $ $ $ $ $ $ Tube 2-Tube $ $ $ $ $ Tube 2-FP 3-MP $ $ $ Insert $ $ $ $ $.71 VISIT OUR WEBSITE! Order Toll-Free: Cat. BR602 3

4 Push-In Air Brake Fittings Meets SAE and DOT specifications Use with NT3100 Nylon Tubing Size Guide Dash Tube Thread -04 1/4 n a -06 3/8 n a -08 1/2 n a Union 1-Tube 2-Tube Ref. SAE # AA $ $ $ $ $ Union Tee 3-TRube Ref. SAE # AA $ $ $ $ Union Elbow 1-Tube 2-Tube Ref. SAE # AA $ $ $ Female Connector 1-Tube 2-FP Ref. SAE # AA $ $ $ $ $ $ $ $ Male Connector Ref. SAE # AA $ $ $ $ $ $ $ $ $ $ $ $ $ Male Elbow Ref. SAE # AA $ $ $ $ $ $ $ $ S 90 Swivel Male Elbow X Ref. SAE # AA02DD S $ S $ S $ S $ S $ S $ S $ S $ S $ Female Elbow 1-Tube 2-FP Ref. SAE # AA $ $ $ $ $ $ $ $ Cat. BR602 Order Toll-Free:

5 Push-In Air Brake Fittings Meets SAE and DOT specifications Use with NT3100 Nylon Tubing Male Run Tee Male Branch Tee Bulkhead Union S 45 Swivel Male Elbow 1-Tube 2-Tube 3-Tube Ref. SAE # AA $ $ $ $ $ S Swivel Male Run Tee 1-Tube 2-Tube 3-MPX Ref. SAE # AA $ $ $ $ $ $ S Swivel Male Branch Tee Ref. SAE # AA $ $ $ $ Male Elbow X Ref. SAE # AA03DD S $ S $ S $ S $ S $ S $ S $ S $13.75 Ref. SAE # AA0302 X 3-Tube Ref. SAE # AA04EE S $ S $ S $ S $ S $ S $ Tube 2-Tube 3-MPX Ref. SAE # AA04FF S $ S $ S $ S $ S $ S $ $ $ $ $ $ $ $ $ $ $13.83 Plastic Tube and Hose Cutter Cuts plastic tubing and hose up to 1/2" OD. Mounts on bench or wall. Designed to close automatically for safety when not in use. Not for use with wire-reinforced hose. DT191 Plastic Tube Cutter $17.96 DT191B Replacement Blade $7.73 Order Toll-Free: Cat. BR602 5

6 Pre-Assembled Air Brake Meets SAE and DOT specifications Coiled Air Brake Tube Kit Gladhand Coupling for Air Brake Each kit includes two coiled asemblies: Red for emergency Blue for service Pre-assembled for immediate installation. Conforms to DOT FMVSS , SAE J844 Type B, and SAE J1131. Max. working pressure: 150 psi Temperature range: -40 to 200 F Die cast aluminum body Service (blue) $ Emergency (red) $ Universal (fits either) $8.95 Item # Length Pigtail Price 3W ' 6" $ W ' 12" $ W ' 12" $61.60 Bulkhead Couplings Bulkhead Coupling Bulkhead Coupling Item # MP FP Length Material Price /2 1/ Brass $ /2 1/ Brass $7.38 Bulkhead Coupling Item # MP FP Length Material Price n/a 1/ Brass $ n/a 1/ Brass $ n/a 1/ Steel $ n/a 1/ Steel $ n/a 1/ Steel $ n/a 3/ Brass $ n/a 1/ Brass $6.49 Item # MP FP Length Material Price /2 1/ Steel $ /2 1/ Steel $ /2 1/ Brass $ /2 1/ Brass $ Cat. BR602 Order Toll-Free:

7 Air Brake Fittings: Copper Tube Meets SAE and DOT specifications Use with copper tubing Size Guide Dash Tube Thread -04 1/ / / / / Union Tee Female Connector 1-Tube 2-FP Ref. SAE # BA Male Elbow Sleeve Ref. SAE # $ $ $ $ $ $ Nut Ref. SAE # $ $ $ $ $ $ Union 1-Tube 2-Tube 3-Tube Ref. SAE # BA $ $ $ $ $ $ $ $ $ Union Elbow Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ Male Connector Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ $7.57 Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ L 90 Male Elbow Long L $ L $ L $ L $ Tube 2-Tube Ref. SAE # BA $ $ $ $ $11.09 Order Toll-Free: Cat. BR602 7

8 Air Brake Fittings: Copper Tube Meets SAE and DOT specifications Use with copper tubing Female Elbow Male Run Tee Male Branch Tee Male Elbow 1-Tube 2-FP Ref. SAE # BA $ $ $ $ $ $ $ $ Tube Ref. SAE # BA $ $ $ $ $ $ $ $ $ Tube 2-Tube 3-MP Ref. SAE # BA $ $ $ $ $ $ $ $ $ $14.60 Ref. SAE # BA $ $ $ $ $ $ $ $ Adapter Tee 1-Tube 2-FP 3-MP $ Cat. BR602 Order Toll-Free:

9 Pipe Fittings National Pipe Tapered Fuel (NPTF) Size Guide Dash Pipe Thread -02 1/ / / / / Slotted Plug $ $ $ Countersunk Hex Plug $ $ $ $ $ Cap Adapter 1-FP 2-MP Ref. SAE # $ $ $ $ $ $ $ $ $ $ Female Pipe Union 1-FP 2-FPX $ $ $ $ Female Pipe Coupling Square Head Plug $ $ $ $ $ Hex Head Plug $ $ $ $ $ $ $ $ $ $ Locknut $ $ $ $ Bushing 1-MP 2-FP Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ $ FP 2-FP Ref. SAE # $ $ $ $ $ R Reduced Coupling 1-FP 2-FP Ref. SAE # R $ R $ R $ R $ R $ R $2.82 Order Toll-Free: Cat. BR602 9

10 Pipe Fittings National Pipe Tapered Fuel (NPTF) Hex Nipple ½" Long Nipple " Long Nipple Street Elbow 1-MP 2-MP Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ Close Nipple 1-MP 2-MP $ $ $ $ $ MP 2-MP $ $ $ $ " Long Nipple 1-MP 2-MP $ $ $ $ ½" Long Nipple 1-MP 2-MP $ $ $ $ $ $ $ $ ½" Long Nipple $ $ $ $ Street Elbow 1-FP 2-MP Ref. SAE # $ $ $ $ $ FP 2-MP Ref. SAE # $ $ $ $ $ $ Male Elbow 1-MP 2-MP $ $ $ $ $ Female Elbow 1/2" Teflon Tape Meets military spec: MIL-T-27730A TTA50 260" $.60 TTB50 520" $.92 Teflon Paste Temp. range: -300 to 500 F 1-FP 2-FP Ref. SAE # $ $ $ $ $8.62 LCTS14 ¼ pt $9.94 LCTS1 ½ pt $14.47 LCTS2 1 pt $ Cat. BR602 Order Toll-Free:

11 Pipe Fittings National Pipe Tapered Fuel (NPTF) Male Branch Tee Female Pipe Tee Street Tee Female Pipe Cross 1-FP 2-FP 3-MP Ref. SAE # $ $ $ $ $ FP 2-FP 3-FP Ref. SAE # $ $ $ $ $ FP 2-MP 3-FP Ref. SAE # $ $ $ $ $ FP 2-FP 3-FP 4-FP $ $ $ $ $22.37 Bulkhead Couplings Bulkhead Coupling Bulkhead Coupling Item # MP FP Length Material Price /2 1/ Brass $ /2 1/ Brass $7.38 Bulkhead Coupling Item # MP FP Length Material Price n/a 1/ Brass $ n/a 1/ Brass $ n/a 1/ Steel $ n/a 1/ Steel $ n/a 1/ Steel $ n/a 3/ Brass $ n/a 1/ Brass $6.49 Item # MP FP Length Material Price /2 1/ Steel $ /2 1/ Steel $ /2 1/ Brass $ /2 1/ Brass $5.01 Order Toll-Free: Cat. BR602 11

12 45 Flare SAE J512 Use with copper, brass, aluminum and steel tubing. Size Guide Dash Tube Thread -02 1/ / / / / / / / / Note: In sizes -02, -03, -04, -05, -08, and -10, the threads of SAE 37 flare and SAE 45 flare are the same. However, the sealing surface angles are not the same Short Nut Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ Cap $ $ $ $ $ $ Plug Ref. SAE # $ $ $ $ $ $1.25 SAE 45 Flare to Inverted Flare Adapter 1-MS 2-MI Item # SAE Inv. Price $ ¼ $ $ $ $ Long Nut Ref. SAE # $ $ $ $ $ $ $ $6.50 VISIT OUR WEBSITE! DiscountHydraulicHose.com 342 Union 1-MS 2-MS Ref. SAE # $ $ $ $ $ $ $ $ $ Check Valve 1-MS 2-MP $ $ $ Union Tee 1-MS 2-MS 3-MS Ref. SAE # $ $ $ $ $ $ $ $ Male Branch Tee 1-MS 2-MS 3-MP Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ $ $ $ Female Connector 1-MS 2-FP Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Cat. BR602 Order Toll-Free:

13 45 Flare SAE J512 Use with copper, brass, aluminum and steel tubing. 348 Male Connector Male Elbow Female Elbow Male Elbow 1-MS 2-MP Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ MS 2-MP Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ MS 2-FP Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ $ Male Run Tee 1-MS 2-MP 3-MS Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ MS 2-MP Ref. SAE # $ $ $ $ $ $ $ $ $ Union Elbow 1-MS 2-MS Ref. SAE # $ $ $ $ $ $ $ $ $15.52 Order Toll-Free: Cat. BR602 13

14 Compression Fittings SAE J512 Use with aluminum, copper and plastic tubing Size Guide Dash Tube Thread -02 1/ / / / / / / / / Brass Insert for Tubing Note: Wall thickness of plastic tubing varies. Be sure to note the inner diameter of your tubing when ordering inserts. Item # OD Price " $ " $ " $ A.172" $ " $ A.232" $ " $ " $ " $ A.483" $ " $ Sleeve Ref. SAE # $ $ $ $ $ $ $ $ $ $ Nut Ref. SAE # $ $ $ $ $ $ $ $ $ $ Long Nut 362 Union 1-Tube 2-Tube Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ Check Valve Spring and ball can be reversed to change flow direction $ $ $ $ $ Union Tee 1-Tube 2-Tube 3-Tube Ref. SAE # BA $ $ $ $ $ $ $ $ Union Elbow 1-Tube 2-Tube Ref. SAE # BA $ $ $ $ $ $ $ $8.79 Ref. SAE # $ $ $ $ $ $ $ Cat. BR602 Order Toll-Free:

15 Compression Fittings SAE J512 Use with aluminum, copper and plastic tubing 366 Female Connector Male Elbow 371 Male Run Tee 374 Bulkhead Union 1-Tube 2-FP Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ $ Male Connector Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $7.22 Ref. SAE # BA $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Female Elbow 1-Tube 2-FP Ref. SAE # BA $ $ $ $ $ $ Tube Ref. SAE # BA $ $ $ $ $ $ Male Branch Tee 1-Tube 2-Tube 3-MP Ref. SAE # BA $ $ $ $ $ $ $ Tube 2-Tube $ $ $ Adapter Tee 1-FP 2-MP 3-Tube $ $2.57 Plastic Tube and Hose Cutter Cuts plastic tubing and hose up to 1/2" OD. Mounts on bench or wall. Designed to close automatically for safety when not in use. Not for use with wire-reinforced hose. DT191 Plastic Tube Cutter $11.59 DT191B Replacement Blade $4.99 Order Toll-Free: Cat. BR602 15

16 Push-In Use with PT230 Polyamide or PT240 Polyethylene Tubing Size Guide Dash Tube Thread -02 1/8 n/a -04 1/4 n/a -05 5/16 n a -06 3/8 n a -08 1/2 n a WARNING: These fittings are not to be used in air brake applications Union 1-Tube 2-Tube $ $ $ $ $ $ Union Tee 1-Tube 2-Tube 3-Tube $ $ $ $ $ Union Elbow 1-Tube 2-Tube $ $ $ $ Female Connector 1-Tube 2-FP $ $ $ $ $ $ Male Connector $ $ A* $ $ $ $ A* $ $ $ $ $ $ Male Elbow $ $ $ $ $ $ $ $ $ S 90 Male Elbow Swivel X S $ S $ S $ S $ S $ S $ S $ S $ S $ S $ S $ Male Run Tee Swivel X 3-Tube $ A-02* $ $ $ $ $ $ $ $ $ $9.25 * A = UNF Thread Male Branch Tee Swivel 1-Tube 2-Tube 3-MPX $ A* $ $ $ $ $ $ $ $ $ $11.58 * A = UNF Thread * A = UNF Thread 16 Cat. BR602 Order Toll-Free:

17 Poly-Tube Fittings Use with PT200, PT230 or PT240 Tubing Size Guide Dash Tube Thread -04 1/ / / / Plastic Sleeve $ $ $ $ Nut $ $ $ $ Union Union Tee 1-Tube 2-Tube 3-Tube $ $ $ Female Connector 1-Tube 2-FP $ $ $ $ $ $ $ Male Connector Male Elbow $ $ $ $ $ $ $ $ Female Elbow 1-Tube 2-FP $ $ $ $ Male Run Tee Male Branch Tee 1-Tube 2-Tube 3-MP $ $ $ $ $ $ Bulkhead Union 1-Tube 2-Tube $ $ $ $ Tube 2-Tube $ $ $ $ $ $ $ $ $ $ $ $ Tube $ $ $ $ $7.20 Order Toll-Free: Cat. BR602 17

18 Inverted Flare SAE J512 Inverted Use with copper, brass, aluminum, and steel tubing that can be flared Size Guide Dash Tube Thread -02 1/ / / / / / / / / / Tube Nut (Brass) Ref. SAE # $ $ $ $ $ Tube Nut (Steel) Ref. SAE # $ $ $ $ $ $ $ $ $ $ Plug Ref. SAE # $ $ $ $ Long Tube Nut (Steel) $ $1.37 SAE 45 Flare to Inverted Flare Adapter 1-MS 2-MI Item # SAE Inv. Price $ ¼ $ $ $ $ Male Connector Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Female Connector 1-Tube 2-FP Ref. SAE # $ $ $ $ $ $ $ $ Union 1-Tube 2-Tube Ref. SAE # $ $ $ $ $ $ $9.68 VISIT OUR WEBSITE! 18 Cat. BR602 Order Toll-Free:

19 Inverted Flare SAE J512 Inverted Use with copper, brass, aluminum, and steel tubing that can be flared Male Elbow 3452 Female Elbow 3602 Male Branch Tee 3702 Union Tee Ref. SAE # $ $ $ $ $ $ $ $ $ Male Elbow 1-Tube 2-FP Ref. SAE # $ $ $ $ $ $ Union Elbow 1-Tube 2- Tube 3-MP Ref. SAE # $ $ $ $ Female Branch Tee 1-Tube 2-Tube 3-Tube Ref. SAE # $ $ $ $ $ $ Male Run Tee 1-Tube 2- Tube 3-FP Ref. SAE # Ref. SAE # $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Tube 2-Tube Ref. SAE # $ $ $ $ $ $ $ $ $ Tube Ref. SAE # $ $ $ $ $10.12 Order Toll-Free: Cat. BR602 19

20 Threaded Sleeve Double Compression Use with aluminum and copper tubing. Size Guide Dash Tube Thread -02 1/ / / / / Nut Male Connector $ $ $ $ $ Male Elbow $ $ $ $ $ Union 1-Tube 2-Tube $ Adapter Tee $ $ $ $ $.71 3-Tube $5.18 Poly-Air Hose Assemblies For shop air with pneumatic tools Coiled Air Tool Hose Assembly Lightweight, self-retracting hose coil eliminates the need for reels and other expensive take-up devices. 200 psi working pressure (78 F) 800 psi minimum burst One end, male pipe rigid One end, male pipe swivel Available in yellow only Caution: Do not use in applications where temperature exceeds 200 F. Higher temperatures could result in hose rupture. Item # Size Max. Working Length Price J12 1/4" 10½ feet $ J25 1/4 23½ feet $ J50 1/4" 47 feet $ J100 1/4" 94 feet $ J12 3/8" 10½ feet $ J25 3/8" 23½ feet $ J50 3/8" 47 feet $60.15 Repair Fittings Male Pipe Rigid /4 $ /8 $9.28 Male Pipe Swivel J 1/4 $ J 3/8 $16.08 Plastic Sleeve A 1/4 $ A 3/8 $.88 Brass Nut B 1/4 $ B 3/8 $.87 Steel Spring Guard C 1/4 $ C 3/8 $ Cat. BR602 Order Toll-Free:

21 Ground Plugs & Shut-Off Valves for instrumentation, hydraulic and pneumatic systems Use copper, steel, aluminum, or plastic tubing where applicable. Conformance: Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear or aircraft applications, except as noted. Material: Brass bodies and brass handles. Pressure: 30 psi maximum, except where noted. Temperature: -65 to 250 F (refer to tubing temp. range) Truck Shut-Off Male to Female Pipe Ground Plug Drain Part # Pipe Price /8 $ /4 $ /8 $11.50 SAE 45 Flare Double Multiple Shut-Off Click-washer assembly positively holds valve in desired position, and gives a pronounced click so that operator definitely knows when valve is fully open for desired tank. Part # Type Pipe Stem Price way 1/4" Short $ way 3/8" Short $ way 1/4" Short $ way 1/4" Long $ way 3/8" Short $ way 3/8" Long $ W /4 $11.32 Drain Cock Part # Tube Price /4 $ /16 $ /8 $13.05 Pipe Double Female Marine Type Male and Female Pipe SAE 45 Flare Straightway 3W /4 $ /8 $ /4 $ /8 $28.43 Pipe Male and Female Part # Tube Pipe Price /4 1/8 $ /16 1/8 $ /4 1/4 $ /8 1/4 $ /8 $ /4 $8.86 Order Toll-Free: Cat. BR602 21

22 Drain Cocks & Needle Valves for instrumentation, hydraulic and pneumatic systems Use with copper, steel, aluminum, plastic tubing or hose where applicable. Hose to Pipe Steel Body Gasoline Shut-Off with Screen Filter SAE 45 Flare Double Conformance: Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear or aircraft applications, except as noted. Material: Brass bodies with steel handles, except where noted. Pressure: 150 psi maximum Temperature: -65 to 250 F (refer to tubing temp. range) Drain External Seat 5/8" hose to 3/8" male pipe A $9.02 Hose to Pipe Steel Body 1/4" tube to 1/8" male pipe $12.06 Pipe Male and Female /4 $6.59 SAE 45 Flare Straightway Item# Pipe Lng. Price /8 0.90" $ /4 1.00" $ /8 1.25" $ /2 1.52" $8.31 5/8" hose to 3/8" male pipe A $9.07 Air Vent /8" $ /4" $8.57 Pipe Double Female Part # Tube Pipe Price /4 1/8 $ /4 1/4 $ /16 1/8 $ /16 1/4 $ /8 1/4 $17.46 Drain Internal Seat SAE 45 Flare Angle Item# Pipe Lng. Price /8 1.15" $ /4 1.32" $ /4 1.25" $ /8 1.34" $3.98 Set screw has national fine thread /8" pipe $1.78 Angle Bib Drain /8" $ /4" $8.86 Pipe Double Male Part # Tube Pipe Price /4 1/8 $ /16 1/8 $ /16 1/4 $ /8 1/4 $ /8" pipe $ /4" pipe $ /8" $ /4" $ Cat. BR602 Order Toll-Free:

23 Push-Lock Hose Ends Brass Fittings for Push-Lock Low Pressure Hose 271 Male Pipe Swivel 273 Male Pipe Female Pipe Swivel Ballseat Type Item # Hose Pipe Price /4 1/4 $ /8 1/4 $ /8 3/8 $ /2 3/8 $ /2 1/2 $ /4 3/4 $ Male Pipe Item # Hose Pipe Price /4 1/8 $ /4 1/4 $ /4 3/8 $ /16 1/8 $ /16 1/4 $ /8 1/8 $ /8 1/4 $ /8 3/8 $ /8 1/2 $ /8 3/4 $ /2 1/4 $ /2 3/8 $ /2 1/2 $ /2 3/4 $ /8 3/8 $ /8 1/2 $ /8 3/4 $ /4 1/2 $ /4 3/4 $ /4 $ $7.64 Item # Hose Pipe Price /4 1/8 $ /4 1/4 $ /8 1/4 $ /8 3/8 $ /2 3/8 $ /2 1/2 $ /4 3/4 $ Female Pipe Item # Hose Pipe Price /4 1/8 $ /4 1/4 $ /4 3/8 $ /16 1/8 $ /16 1/4 $ /8 1/8 $ /8 1/4 $ /8 3/8 $ /8 1/2 $ /2 1/4 $ /2 3/8 $ /2 1/2 $ /2 3/4 $ /8 1/2 $ /4 3/4 $3.45 Item # Hose Pipe Price /4 1/8 $ /4 1/4 $ /4 3/8 $ /8 1/4 $ /8 3/8 $ /2 1/2 $ /2 3/4 $ /4 3/4 $ Female Pipe Swivel Gasket Type Item # Hose Pipe Price /4 1/8 $ /4 1/4 $ /8 1/4 $ /8 3/8 $ /8 1/2 $ /2 1/2 $ /4 3/4 $ Hose Mender Item # Hose Price /4 $ /16 $ /8 $ /2 $ /8 $ /4 $3.05 Order Toll-Free: Cat. BR602 23

24 Push-Lock Hose Ends Brass Fittings for Push-Lock Low Pressure Hose Note: In sizes -02, -03, -04, -05, -08, and -10, the threads of SAE 37 flare and SAE 45 flare are the same. However, the sealing surface angles are not the same. 286 JIC 37 Flare Male 292 Inverted Flare Female 282 SAE 45 Flare Male Item # Hose Tube Price /4 1/4 $ /4 5/16 $ /8 3/4 $ /2 1/2 $ /4 3/4 $ SAE 45 Flare Female Swivel Item # Hose Tube Price /4 3/8 $ /16 3/8 $ /8 3/8 $ /4 3/4 $ SAE 45 / JIC 37 Flare Female Swivel (Dual Angle Seat) Item # Hose Tube Price /4 1/4 $ /4 5/16 $ /8 1/2 $ /2 1/2 $ /2 5/8 $ /8 5/8 $3.43 Item # Hose Tube Price /4 1/4 $ /4 3/4 $ /8 3/8 $ /2 1/2 $ /4 3/4 $ JIC 37 Flare Female Swivel Item # Hose Tube Price /4 3/8 $ /16 3/8 $ /8 3/8 $ /4 3/4 $ Inverted Flare Male Swivel Item # Hose Tube Price /4 3/16 $ /4 1/4 $ /4 5/16 $ /16 5/16 $ /16 3/8 $ /8 5/16 $ /8 3/8 $ /2 1/2 $ /8 5/8 $4.52 Item # Hose Tube Price /4 3/16 $ /4 1/4 $ /4 5/16 $ /8 5/16 $ /8 3/8 $ /2 1/2 $ Rigid Tube Shank North American Item # Hose Tube Price /4 3/16 $ /4 1/4 $ /4 5/16 $ /16 5/16 $ /8 3/8 $ /2 1/2 $ /8 5/8 $ /4 3/4 $ M Rigid Tube Shank Metric Item # Hose Tube Price 294M0406 1/4 6mm $ M0408 1/4 8mm $ M0610 3/8 10mm $ M0612 3/8 12mm $ M0815 1/2 15mm $ M1018 5/8 18mm $ M1222 3/4 22mm $ Cat. BR602 Order Toll-Free:

25 Multibarb Hose Ends for Red Air Hose and PVC Tubing 102 Male Pipe 104 Female Pipe 129 Male Pipe 90 Item # Hose Pipe Price /8 1/8 $ /8 1/4 $ /16 1/8 $ /16 1/4 $ /4 1/8 $ /4 1/4 $ /4 3/8 $ /4 1/2 $ /16 1/8 $ /16 1/4 $ /16 3/8 $ /8 1/8 $ /8 1/4 $ /8 3/8 $ /8 1/2 $ /8 3/4 $ /2 1/4 $ /2 3/8 $ /2 1/2 $ /2 3/4 $ /8 3/8 $ /8 1/2 $ /8 3/4 $ /4 1/2 $ /4 3/4 $ /4 $ $ /4 3/4 $ /4 1 $ Male Pipe Swivel Item # Hose Pipe Price /4 1/4 $ /8 1/4 $ /8 3/8 $ /2 3/8 $ /2 1/2 $ /4 3/4 $4.75 Item # Hose Pipe Price /8 1/8 $ /8 1/4 $ /16 1/8 $ /16 1/4 $ /8 1/8 $ /4 1/4 $ /4 3/8 $ /8 1/8 $ /4 1/4 $ /8 3/8 $ /8 1/8 $ /8 1/4 $ /8 3/8 $ /8 1/2 $ /2 1/4 $ /2 3/8 $ /2 1/2 $ /4 3/4 $ /4 $ $ Female Pipe Swivel Item # Hose Pipe Price /8 1/8 $ /16 1/8 $ /16 1/4 $ /4 1/8 $ /4 1/4 $ /4 3/8 $ /16 1/4 $ /16 3/8 $ /8 1/4 $ /8 3/8 $ /8 1/2 $ /2 3/8 $ /2 1/2 $ /4 3/4 $2.87 Item # Hose Pipe Price /16 1/8 $ /4 1/8 $ /4 1/4 $ /4 3/8 $ /16 1/8 $ /16 1/4 $ /16 3/8 $ /8 1/8 $ /8 1/4 $ /8 3/8 $ /2 1/4 $ /2 3/8 $ /2 1/2 $ /8 3/8 $ //8 1/2 $ /4 1/2 $ /4 3/4 $ /4 $ $ Male Pipe 45 Item # Hose Pipe Price /4 1/8 $ /4 1/4 $ /8 1/2 $ /8 1/4 $ /8 3/8 $ /2 1/4 $ /2 3/8 $ /2 1/2 $4.16 Fasten all hose barbs securely with hose clamps or ferrules (page 27). Order Toll-Free: Cat. BR602 25

26 Multibarb Hose Ends for Red Air Hose and PVC Tubing 142 SAE 45 Flare Male 145 JIC 37 Female Swivel 179 Tee Splicer Item # Hose Tube Price /16 1/4 $ /4 1/4 $ /4 3/8 $ /16 5/16 $ /8 3/8 $ /8 1/2 $ /2 1/2 $ SAE 45 / JIC 37 Dual Angle Seat Female Swivel Item # Hose Tube Price /16 1/4 $ /4 1/4 $ /4 5/16 $ /16 5/16 $ /8 1/2 $ /2 1/2 $ /2 5/8 $ SAE 45 Female Swivel Item # Hose Tube Price /16 3/16 $ /4 3/8 $ /16 3/8 $ /8 3/8 $ /2 1/2 $2.13 Item # Hose Tube Price /8 3/8 $ Hose Mender Elbow Item # Hose Price /4 $ /16 $ /8 $ /2 $ Hose Mender Item # Hose Price /8 $ /16 $ /4 $ /16 $ /8 $ /2 $ /8 $ /4 $ $2.51 Item # Hose Price /16 $ /4 $ /16 $ /8 $ /2 $ /8 $ /4 $ NPSM x NPTF Adapter Item # NPSM NPTF Price /8 1/8 $ /4 1/8 $ /4 1/4 $ /8 1/4 $ /8 3/8 $ /8 1/2 $ /2 3/8 $ /2 1/2 $ /4 3/4 $ Male Pipe Union Item # Pipe Price /8 $ /4 $ /16 $ /8 $ /2 $2.89 Fasten all hose barbs securely with hose clamps or ferrules (page 27). 26 Cat. BR602 Order Toll-Free:

27 Clamps and Ferrules Use with Multibarb Hose Ends Brass Ferrule (Air) BFM for medium weight hose Brass Ferrule (Fluid) BFMW for medium weight water hose Sold in packages of 50 Item # ID Dies (5111A Crimper) Price BFM R41 / P41 / P42 $10.00 BFM R40 / P40 $13.00 BFM R39 / P39 $13.00 BFM R39 / P39 $13.50 BFM R37 / P38 $14.50 BFM R36 / P37 $15.00 BFM R35 / P36 $15.50 BFM R34 / P35 $16.50 BFM R33 / P34 $16.50 BFM R31 / P32 $17.50 BFM718B R31 / P32 $17.00 BFM R30 / P31 $17.50 BFM750B R30 / P31 $17.00 BFM R29 / P30 $18.50 BFM781B R29 / P30 $18.00 BFM R28 / P29 $19.00 Brass Ferrule (Air) BFL for light weight hose Sold in packages of 25 Item # ID Dies (5111A Crimper) Price BF R28 / P29 $7.00 BF R27 / P28 $7.25 BF R26 / P27 $6.50 BFW R25 / P26 $8.25 BFW R24 / P25 $8.25 BFW R21 / P22 $10.00 BFW R19 / P20 $10.50 BFW R13 / P14 $11.75 BFMW R18 / P19 $15.50 BFMW R16 / P17 $11.75 BFMW R15 / P15 $12.50 BFMW R11 / P12 $15.50 BFMW R9 / P10 $33.25 BFMW R4 / P5 $33.75 BFMW / P1 $ /2" Band Clamp (Stainless Steel) Sold in packages of 50 Item # ID Dies (5111A Crimper) Price BFL R44 / P45 $6.50 BFL R44 / P44 $10.50 BFL R43 / P44 $7.00 BFL R41 / P42 $7.00 BFL R40 / P41 $7.00 BFL R39 / P40 $7.00 BFL R38 / P39 $7.00 BFL R37 / P38 $10.00 BFL R37 / P38 $7.00 BFL R36 / P37 $8.00 BFL R36 / P36 $8.50 BFL R34 / P35 $9.00 BFL R34 / P34 $9.50 BFL R31 / P32 $9.50 BFL R30 / P32 $10.00 BFL R31 / P31 $17.00 Item # Diameter Range Price B6H.38.88" $.38 B8H.44 1" $.38 B10H " $.38 B12H " $.39 B16H " $.39 B20H " $.40 B24H " $.40 B28H " $.41 B32H " $.41 B36H " $.41 B40H " $.48 B44H " $.52 B48H " $.52 B52H " $.57 B56H " $.57 B60H " $.59 B64H " $.59 B72H 3 5" $.63 B80H " $.66 B88H 4 6" $.73 B96H " $.84 B104H 5 7" $.84 Order Toll-Free: Cat. BR602 27

28 Low Pressure Hose Crimpers Brass ferrules only Not for use with steel hose ends Hose Crimper This Hose Crimper provides big tool crimping advantages at a fraction of the cost. Rugged, portable and easy to use. 855 Hose Crimper Includes five dies, from.49" to.71" 855A Hose Crimper Includes five dies, from.447" to.671" $138 $138 Replacement Dies $19.80 Die # Hose OD Die # Hose OD " " " " " " " " " Large Hose Crimper Crimps 1/2" to 1" ID hoses with larger outside diameters, from 11/16" to 1½". Crimps standard brass or aluminum ferrules. Order separare dies for each hose diameter. 860 Large Hose Crimper $164 Dies (sold separately) $24.00 Die # Hose OD Die # Hose OD /16" " /32" /32" /4" /16" /32" /8" /16" /16" /32" /4" /8" /16" /32" /8" /16" /16" /32" /2" VISIT OUR WEBSITE! Manually-Operated Brass Ferrule Crimper Crimps all ferrules shown on previous page. Dies are available with plain or ribbed surface (see ferrules for die selection). 5111A Hose Crimper $690 Dies (sold separately) $ Available in ribbed or plain Height (with handle upright): 27" Base: 8" x 3" Weight: 29 pounds Dies not included. 28 Cat. BR602 Order Toll-Free:

29 Hose & Tubing Construction: black EPDM inner tube with multi-fiber spiral reinforcement and red EPDM outer cover. Temperature Range: -40 F to +160 F (water up to 180 F) Multibarb Hose Ends p Clamps and Ferrules p Heavy Duty Red Air Hose Recommended for air and water applications where petroleum contact is limited. Also recommended for some agricultural solutions. Not recommended for hydraulic fluids. Min. Bend Radius Cut Price (per foot) Reel Price (per foot) Item # ID OD Max. PSI Min. Burst Reel* /4" 0.63" 300 1,200 3" 700' $0.51 $ /16" 0.63" 300 1,200 3¼" 700' $0.57 $ /8" 0.72" 300 1,200 3¼" 700' $0.63 $ /2" 0.88" 300 1,200 4½" 700' $0.77 $ /8" 1.00" 300 1,200 5¼" 700' $0.91 $ /4" 1.16" 300 1,200 5¾" 700' $1.14 $ " 1.44" ¾" 700' $1.63 $ ¼" 1.78" ¾" 550' $2.17 $ ½" 2.03" ½" 400' $2.58 $ " 2.50" " 300' $3.42 $3.25 * Reel may not contain one continuous length of hose. Construction: black PVC tubing with high tensile polyester yarn reinforcement. and colored PVC cover (available in red, blue, yellow, green, and gray) Temperature Range: -15 F to 150 F Multibarb Hose Ends p Clamps and Ferrules p. 38 K1134 Multi-Purpose Air & Water Hose Recommended for air, water, and mild water-soluble chemicals. Ideal for in-plant operations requiring color coding of hose supply lines. Cut Price (per foot) Reel Price (per foot) Item # ID OD Max. 70 F Max. 122 F Reel K /4".500" ' $0.35 $0.33 K /16".625" ' $0.46 $0.43 K /8".625" ' $0.42 $0.40 K /2".813" ' $0.53 $0.50 K /2".906" ' $0.70 $0.66 K /4" 1.125" ' $0.96 $0.91 K " 1.406" ' $1.26 $1.20 Red (K1134) available in all sizes Yellow (K1131) available in sizes -04, -06, 08, -12 and -16 Blue (K1136) available in sizes -04, -06, 08, -12 and -16 Green (K1137) available in size -06 only Grey (K1138) available in sizes -04, -06, 08, -12 and -16 Order Toll-Free: Cat. BR602 29

30 Hose & Tubing Construction: black, oil resistant Nittrile (BTR) tube with braided fiber reinforcement. Oil and abrasion resistant, black Neoprene (CR) cover. Temperature Range: -40 F to +212 F Push-On Hose Ends p No clamp needed 3384 Push-On Low Pressure Hose Recommended use: low pressure air, fuel, oil, and water lines. Also available in Blue, Gray, Red, Yellow, and Green (add 10% to price). Please specify color when ordering. Item # ID OD Max. PSI Min. Burst Reel* /4".50" 250 1,000 3" 250' $0.69 $ /8".62" 250 1,000 3" 250' $0.84 $ /2".75" 250 1,000 5" 250' $1.00 $ /8".91" 250 1,000 6" 250' $1.41 $ /4" 1.03" 250 1,000 7" 250' $1.74 $1.65 * Reel may not contain one continuous length of hose. Min. Bend Radius Cut Price (per foot) Reel Price (per foot) Clear Braided PVC Tubing Recommended for various machine tools and transportation of chemicals. Construction: clear PVC tubing with high tensile polyester yarn reinforcement. Item # ID OD Max. PSI Coil Cut Price (per foot) Coil Price (per foot) IBR0446 1/4".50" ' n/a $0.36 IBR0609 3/8".63" ' n/a $0.45 IBR0812 1/2".75" ' n/a $0.57 IBR1218 3/4" 1.06" ' n/a $1.11 IBR1621 1" 1.31" ' n/a $1.42 Temperature Range: 14 F to 149 F Multibarb Hose Ends p Clamps and Ferrules p Cat. BR602 Order Toll-Free:

31 Hose & Tubing NT100 Nylon 11 Air Brake Tubing Meets all requirements for SAE J844 Type A & B and DOT FMVSS Construction: nylon tubing with braided fiber reinforcement. Air Brake Fittings p Push-In Air Brake Fittings p. 13 Recommended for air brake systems except where temperatures exceed 200 F or where battery acid can drip on tubing. Sizes 3/8" and larger include braided polyamide fiber reinforcement. Item # ID Tube Walle Max. PSI* Min. Burst* Coil NT100-02² 1/8.023" 150 1,000 3/8 100' n/a $.17 NT /4.040" 150 1, ' n/a $.45 NT /16.040" 150 1,000 1¼ 100' n/a $.55 NT /8.062" 150 1,400 1½ 100' n/a $.92 NT /2.062" ' n/a $1.31 NT /8.092" ½ 100' n/a $2.25 NT /4.092" ' n/a $ PSI measured at 75 Fahrenheit 2 Insert not required. Size -02 does not meet DOT standards. Min. Bend Radius Cut Price (per foot) Coil Price (per foot) Temperature Range: -40 F to +200 F Construction: soft, pliable, clear plasticized PVC resin tubing. Poly-Tube Fittings p. 10 Compression Fittings p. 7 8 PT200 Polyvinyl Chloride Tubing Recommended for low pressure laboratory, industrial, agricultural or domestic applications. Min. Bend Radius Cut Price (per foot) Coil Price (per foot) Item # ID Tube Walle Max. PSI Min. Burst Coil PT /4.062" ' n/a $.24 PT /16.062" ¼ 100' n/a $.35 PT /8.062" ½ 100' n/a $.40 PT /2.062" ' n/a $.56 * PSI measured at 75 Fahrenheit Temperature Range: -5 F to +105 F Order Toll-Free: Cat. BR602 31

32 Hose & Tubing PT230 Polyamide Nylon 6/6 Tubing Construction: semi-rigid polyamide tubing. Compression Fittings p. 7 8 Push-In Fittings p. 9 Recommended for general purpose low-pressure applications. Item # ID Tube Walle Max. PSI* Min. Burst* Coil PT /8".015" 300 1,000 3/4" 100' n/a $.17 PT /4".030" 300 1,000 1½" 100' n/a $.39 PT /16".036" 300 1,000 2" 100' n/a $.56 PT /8".040" 300 1,000 2½" 100' n/a $.73 PT /2".062" 300 1,000 3" 100' n/a $1.37 * PSI measured at 75 Fahrenheit Min. Bend Radius Cut Price (per foot) Coil Price (per foot) Temperature Range: -40 F to +180 F Available in Natural off-white (NA) or Black (BK) PT240 Polyethylene Tubing Construction: low-density polyethylene tubing. Poly-Tube Fittings p. 10 Compression Fittings p. 7 8 Recommended for industrial and agricultural applications. Min. Bend Radius Cut Price (per foot) Coil Price (per foot) Item # ID Tube Walle Max. PSI* Min. Burst* Coil PT /8.015" 300 1,000 3/4 100' n/a $.17 PT /4.030" 300 1,000 1½ 100' n/a $.37 PT /16.036" 300 1, ' n/a $.39 PT /8.040" 300 1,000 2½ 100' n/a $.64 PT /2.062" 300 1, ' n/a $1.01 * PSI measured at 75 Fahrenheit Temperature Range: -40 F to +180 F Push-In Fittings p. 9 Available in Natural off-white (NA), Black (BK), Yellow (YW), Orange (OR), Blue (BL), Red (RD) or Green (GN) 32 Cat. BR602 Order Toll-Free:

33 Hose & Tubing Copper Tubing Sold only in 50 ft. coils Compression Fittings p. 7 8 Air Brake Fittings p Item # OD Wall Thickness Length Price /8".030" 50' $ /16".030" 50' $ /4".030" 50' $ /16".032" 50' $ /8".032" 50' $ /2".032" 50'. $ /8".035" 50' $ /4".035" 50' $ SAE 45 Flare Fittings p. 2 3 Inverted Flare Fittings p Threaded Sleeve Fittings p. 20 Aluminum Versatube Sold only in 50 ft. coils Compression Fittings p. 7 8 SAE 45 Flare Fittings p. 2 3 Item # OD Wall Thickness Length Price / ' $ / ' $ / ' $ / ' $ / ' $ / ' $66.68 Inverted Flare Fittings p Threaded Sleeve Fittings p. 20 VISIT OUR WEBSITE! Order Toll-Free: Cat. BR602 33

34 Tools for Metal & Plastic Tubing Utility Tube Cutter Double Flaring Tool (45 ) Handheld Plastic Tube and Hose Cutter Cut hard and soft copper, aluminum, brass, carbon steel and stainless steel tubing, up to 1-1/8" OD. Features an enclosed feed screw to eliminate clogging and jamming. Grooved rolls for close to flare cuts and a fold away reemer. Caution: Sharp blade! Keep hands and fingers away from cutting surface. DT150 Utility Tube Cutter $23.48 DT1422R Replacement Blade $9.85 Spring Tube Benders These tube bending springs operate in hand bending copper, aluminum and other thin-walled tubing. True bends with minimum tube wall collapsing. Belled at one end for easier removal. Item # Tube OD Length Price DT104 1/4" 10" $3.42 DT105 5/16" 10" $5.34 DT106 3/8" 10" $3.67 DT107 7/16" 12" $11.33 DT108 1/2" 12" $4.89 DT1010 5/8" 12" $6.41 New style tool makes single or double flaring quick and easy. Flares copper, aluminum, brass, bundyweld, and steel tubing. Cam action provides positive non-slip grip on the tubing with just a squeeze of the handle. Double flaring bar also serves as gauge for correct tubing height to insure perfect flares. Single 45 flares 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8" OD tubing (up to 1/2" for double flares). Components available separately. DT220 Double Flaring Tool $ DT210 Tool for single flaring $98.25 DT221 Double flaring bar $35.58 Flaring Tool (45 ) Economical, fast-operating tool forms a 45 flare in soft copper, aluminum and brass tubing. Quick slip-on aluminum alloy yoke. Swiveling hard chrome finished cone assures smooth flares. Yoke slips down over top of bar and locks into position with one turn. Single flares 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" OD tubing. DT1022 Flaring Tool (45 ) $39.41 This handy tool cuts plastic tubing and hose up to 1" OD. Lightweight and durable for long service life. Not for use with wire-reinforced hose. DT135 Plastic Tube Cutter $39.60 DT135B Replacement Blade $13.61 Plastic Tube and Hose Cutter Cuts plastic tubing and hose up to 1/2" OD. Mounts on bench or wall. Designed to close automatically for safety when not in use. Not for use with wire-reinforced hose. DT191 Plastic Tube Cutter $11.59 DT191B Replacement Blade $ Cat. BR602 Order Toll-Free:

35 Tools for Metal & Plastic Tubing Metal Tube Cutting and Flaring Kit Cutting and flaring metal tubing just became a little easier with the convenient DT345 Tube Cutting and Flaring Kit. Features a quality-made double flaring tool offering accurate single flares on 3/16" thru 5/8" tubing Hardened, smooth cone for accurate 45 flares. Single flares on 3/16" thru 5/8" tubing. Double flares on 3/16" thru 1/2" tubing. Clamp screw for easy clamping and removal of tubes. Flaring bar installed from either side of yoke. Flares soft copper, brass, aluminum and mild steel (JIC and bundy) tubing. Caution: The DT150 has a sharp blade! Keep hands and fingers away from cutting surface. Kit components can be ordered separately. DT345K Tube Cutting and Flaring Kit $ DT Flaring Tool w/ case and $97.05 Double Flare Adapters DT /16" Double Flare Adapter $9.56 DT /4" Double Flare Adapter $9.56 DT /16" Double Flare Adapter $9.56 DT /8" Double Flare Adapter $9.56 DT /2" Double Flare Adapter $9.56 DT150 Utility Tube Cutter $23.48 DT1422R Replacement Blade $9.85 For ninety days after the date of purchase, Discount Hydraulic Hose.com warrants the products in this catalog to be free from defect in materials and workmanship when properly installed and maintained. Any claim for defects must be in writing and must be received within 90 days of the receipt of the product. Discount Hydraulic Hose.com must have a reasonable opportunity thereafter to examine and investigate. LIMITED WARRANTY The customer s exclusive remedy with respect to any claim of any kind whatsoever shall be refund of the purchase price or replacement of the product at the option of Discount Hydraulic Hose.com. In no event shall Discount Hydraulic Hose.com be liable for any incidental or consequential damages whatsoever. Order Toll-Free: Cat. BR602 35

BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING

BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE

More information

Quicklub Lubrication Systems Fittings, Adapters and Accessories

Quicklub Lubrication Systems Fittings, Adapters and Accessories Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2

More information

Quicklub Lubrication Systems Fittings, Adapters and Accessories

Quicklub Lubrication Systems Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and

More information

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant

More information

$1.50 $3.00 U.S. &adaptors chart

$1.50 $3.00 U.S. &adaptors chart $.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance

More information

Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR

Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required

More information

Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve

Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used

More information

BRASS HOSE BARBS G21B

BRASS HOSE BARBS G21B BRASS HOSE BARBS For clamshell packaged parts add: PAK to the part number. Eg... G20B-025:PAK, etc. Part Pipe Hose PRICE EACH Pkg Number Size I.D. PAK Loose Std Pkg Qty G2B45 45 MALE NPT HOSE BARB Part

More information

82 Series Fittings Table of Contents

82 Series Fittings Table of Contents Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female

More information

TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97

TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97 Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender

More information

Lubrication Installation Components, Accessories & Fittings Table of Contents

Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................

More information

Quicklub Lubrication Systems

Quicklub Lubrication Systems Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for

More information

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends

More information

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Series 2000 Pro-Flow Race Hose Ends Page 3-4 Series 3000 Race Hose Ends Page 5-7 Series 3000 Direct-Fit Hose Ends Page 8-9 Premium Black

More information

QUALITY HYDRAULIC PRODUCTS

QUALITY HYDRAULIC PRODUCTS QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing

More information

O BRIEN BRASS COMPANY

O BRIEN BRASS COMPANY O BRIEN BRASS COMPANY Table of Contents Quality................................2 Threads...............................3 Hose & Coupling Compatibility.............4 SAE 100R1, SAE 100R2...................5

More information

Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings

Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe

More information

Page. Table of Contents. 2 SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4

Page. Table of Contents. 2  SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 Table of Contents Page SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 G1212 NYLON AIR BRAKE: G1212 Bulk Tubing...4 G212 RUBBER AIR BRAKE HOSE: G212 & G212L Bulk Hose...5 G212 Hose Assemblies...5

More information

USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Fluid Power Solutions E715 V5 (8/17)

USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Fluid Power Solutions E715 V5 (8/17) USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fluid Power Solutions E715 V5 (8/17) LAWSON PRODUCTS' FLUID POWER SOLUTIONS Hydraulic Hose Systems Cut Your Hose Costs 50% by Making

More information

Eaton Weatherhead Agriculture Parts Guide

Eaton Weatherhead Agriculture Parts Guide Eaton Weatherhead Agriculture Parts Guide EATON WEATHERHEAD AGRICULTURE PARTS GUIDE This parts guide contains popular Eaton Weatherhead hoses, fittings, adapter and couplings important to your farm equipment

More information

Product Information Report Industrial Hose: Multipurpose Air and Water Hose

Product Information Report Industrial Hose: Multipurpose Air and Water Hose Overview and Water Hose is primarily used to either provide air to power tools such as grinders, sanders and jackhammers, or to provide water to washdown equipment such as cement mixers, and to provide

More information

Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows

Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These

More information

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Featured Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-8 Series 2000 Expander Hose Ends Page 7 Series 2000 Reducer Hose Ends

More information

Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:

Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax: COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball

More information

221 S. Westgate Drive Carol Stream, IL FAX: AG-10/2. January 2014

221 S. Westgate Drive Carol Stream, IL FAX: AG-10/2. January 2014 221 S. Westgate Drive Carol Stream, IL 60188 630-752-0600 FAX: 630-752-0680 www.jasonindustrial.com AG-10/2 January 2014 TRUE-PREEM TPR SPRAYER HOSE TUBE/COLOR: TPR, Black REINFORCEMENT: Polyester Braid

More information

Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.

Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in. Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8

More information

05. YY XX. XX. series nominal size

05. YY XX. XX. series nominal size Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced

More information

Crimp Specifications D100 D165 D205 HYDRAULA. Micrometer Setting. Hose I.D. Recommended Die Set Select the die for your crimper below

Crimp Specifications D100 D165 D205 HYDRAULA. Micrometer Setting. Hose I.D. Recommended Die Set Select the die for your crimper below SAE 100R1AT Hydraulic (R1) D100 D165 D205 Braided s R1-04 0.57 (14.60 mm) D100-12MM D100-12MM D-12MM 2.60 R1-06 0.72 (18.41 mm) D100-16MM D100-16MM D-16MM 2.41 R1-08 0.84 (21.46 mm) D100-19MM D100-19MM

More information

truck and trailer D.O.T. APPROVED FITTINGS, TUBING, CLAMPS AND ACCESSORIES

truck and trailer D.O.T. APPROVED FITTINGS, TUBING, CLAMPS AND ACCESSORIES truck and trailer D.O.T. APPROVED FITTINGS, TUBING, CLAMPS AND ACCESSORIES D.O.T. FITTINGS AND ACCESSORIES Our Versa line stands for quality and value in the world of D.O.T. approved fittings and accessories

More information

Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...

Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature... FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)

More information

B R E N N A N c a t a l o g

B R E N N A N c a t a l o g B R E N N A N c a t a l o g $ 15 00 Dear Valued Customer: We are pleased to present our hydraulic tube fitting and adapter catalog. Since 1953, Brennan Industries, Inc. has been supplying hydraulic tube

More information

AUTOMOTIVE HOSE G611 FUEL LINE. Tube: Smooth, black, oil and gasoline resistant nitrile rubber.

AUTOMOTIVE HOSE G611 FUEL LINE. Tube: Smooth, black, oil and gasoline resistant nitrile rubber. & Truck HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures

More information

100 SERIES & 120 SERIES HOSE

100 SERIES & 120 SERIES HOSE INTRODUCTION MSA Stealth is the new way in performance plumbing. Its strong, lightweight and full-flow design leaves the competition behind. MSA Stealth has a large range of fittings, filters, tools and

More information

EQUIPMENT & ACCESSORIES

EQUIPMENT & ACCESSORIES 0011 O-RING BOSS REPLACEMENT RINGS 00026 BSP O-RINGS FOR RECESSED PORT ADAPTERS Part Number O-Ring ID Wall Dia 0011-02 0.239" 0064" 0011-03 0.301" 0064" 0011-04 0.351" 0072" 0011-05 0.414" 0072" 0011-06

More information

VALVE AND PLUMBING KIT 2408TL LOADER AGCO & MASSEY FERGUSON TRACTORS

VALVE AND PLUMBING KIT 2408TL LOADER AGCO & MASSEY FERGUSON TRACTORS ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT 2408TL LOADER AGCO & MASSEY FERGUSON TRACTORS AGCO MASSEY FERGUSON CAB ROPS ST34A 1533 X ST41A 1540 N/A X TRACTOR AND VALVE KIT GENERAL

More information

Section F Fast-Stor Hose and Fittings

Section F Fast-Stor Hose and Fittings ast-stor and ittings Table of ontents Back Section ast-stor and ittings ast-stor SX Air... 2 ast-stor Air... 3 Measuring Bulk... 4 ast-stor Accessories... 5 ast-stor ittings... 6-8 Selection Procedure...

More information

Hose & Fittings

Hose & Fittings Hose & Fittings www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620)

More information

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No. Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol

More information

Fluid Flow Components Composantes pour un monde fluide

Fluid Flow Components Composantes pour un monde fluide 6011 Fluid Flow Components Composantes pour un monde fluide Vancouver Edmonton Winnipeg Toronto Montreal Moncton Product Index BRASS FITTINGS Page Carded...45-46 Closet Bolt...42 Compression...9-12 Compression

More information

VALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS

VALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT NEW HOLLAND 73 LOADER NEW HOLLAND TRACTORS MODEL 2WD FWA LESS CAB WITH CAB TT55 X X X TT75 X X X Valve and plumbing kit can be installed

More information

TOOLFLEX HTMA PRODUCTS CATALOG. 901 E Jefferson St. Bensenville, Illinois Phone: Fax:

TOOLFLEX HTMA PRODUCTS CATALOG. 901 E Jefferson St. Bensenville, Illinois Phone: Fax: TOOLFLEX 901 E Jefferson St. Bensenville, Illinois 60106 Phone: Fax: 847-455-4559 HTMA PRODUCTS CATALOG TOOLFLEX LOW TWIN NON-CONDUCTIVE HOSE ASSEMBLIES This hose is designed for hydraulic tool applications

More information

AIR HOSE / COUPLERS Air Hose / Couplers For Use with 3538, 3539 ColorConnex Green Coupler Type B, 1/4 in MNPT

AIR HOSE / COUPLERS Air Hose / Couplers For Use with 3538, 3539 ColorConnex Green Coupler Type B, 1/4 in MNPT 3536 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in FNPT 3541 For Use with 3543, 3544 ColorConnex Blue Type C, 1/4 in FNPT 3537 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in MNPT 3542

More information

HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)

HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR) HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.

More information

Welcome to JDM Industrial Maintenance Inc.

Welcome to JDM Industrial Maintenance Inc. Welcome to JDM Industrial Maintenance Inc. We are an experienced and innovative company which has been serving the City of Peterborough and the surrounding areas since 98. Our diverse skills and resources

More information

D. S. HULL COMPANY, INC

D. S. HULL COMPANY, INC PVC Slip x Female Pipe Adapters Mfg Slip Female Pipe 235736 435-005 1/2 1/2 $0.81 235747 435-007 3/4 3/4 $1.03 235758 435-010 1 1 $1.18 235769 435-012 1-1/4 1-1/4 $1.84 235770 435-015 1-1/2 1-1/2 $2.11

More information

Engineering Data. Assembly Length. How to Determine Correct Assembly Length

Engineering Data. Assembly Length. How to Determine Correct Assembly Length Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown

More information

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading. hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI

More information

Recoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION

Recoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION Polyurethane Recoil Hose Greater durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics Longer life expectancy due to kink resistant properties Superior recoil memory due

More information

2016 New Product Catalog. Brass Fittings. & Accessories

2016 New Product Catalog. Brass Fittings. & Accessories 2016 New Product Catalog Brass Fittings & Accessories Blank Page Inside Front Cover Table of Contents 04-07 Pipe Fittings & Nipples 08-11 Compression Fittings 12-15 Flare Fittings 16-17 Garden Hose Fittings

More information

BRASS & BRONZE VALVES

BRASS & BRONZE VALVES BRASS & BRONZE VALVES V200 series Cast Brass are economical general service valves. Ball valves feature chrome plated balls with teflon seats, adjustable packing glands and blowout-proof stems. V205 gate

More information

COUPLINGS. Series Page. Couplings HOSE

COUPLINGS. Series Page. Couplings HOSE COUPLINGS Series Page DRAGON BREATH Steam Female Wing Nut...7610...186 DRAGON BREATH Steam Female Grip Nut...7613...186 DRAGON BREATH Steam Adapters & O-Ring Viton...761...187 Universal Type...7611...188

More information

PVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS

PVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2

More information

4200/4400 ONE-PIECE NON-SKIVE COUPLINGS

4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules

More information

Flexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake

Flexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake INDEX Section Pages Hose Section 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Pages Section Pages Swivel Joints 229-244 Quick Disconnect Couplings 268-345 Flexmaster Joints 245-260 Access.,

More information

connection solutions in stainless steel

connection solutions in stainless steel connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.

More information

AUTOMOTIVE HOSE G611 FUEL LINE. Part Working Weight PRICE PER FOOT Standard Length I.D. Number O.D. Pressure per ft Cut Coil Reel Coil Reel

AUTOMOTIVE HOSE G611 FUEL LINE. Part Working Weight PRICE PER FOOT Standard Length I.D. Number O.D. Pressure per ft Cut Coil Reel Coil Reel AUTO & TRUCK HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures

More information

funnels, measures, gravity cocks, jerry cans and oil suction pumps...

funnels, measures, gravity cocks, jerry cans and oil suction pumps... funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800)

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031 Parts List for: Form No. 108184 RSST-20 Internet

More information

Tubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel

Tubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Tubing & Hose Metric Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Available in a variety of different types to suit a wide range of applications

More information

Sec. 11 NYLON CONNECTORS

Sec. 11 NYLON CONNECTORS Sec. 11 NYLON CONNECTORS 12946 Connector 5/16" x 5/16" 1/8 1/8 12916 12919 12921 12938 Connector 3/8" x 1/4" 1/8 12924 1/4" 12934 Connector 3/8" x 3/8" 18835 (E1ZE-9E499-EA) Nylon 1/8 12926 17629 12922

More information

Injectors-Chips-Clutches-Transmissions-Turbos-Engines-Fuel Systems

Injectors-Chips-Clutches-Transmissions-Turbos-Engines-Fuel Systems Swampʼs Diesel Performance Competition Parts For Your Diesel 304-A Sand Hill Rd. La Vergne, TN 37086 Tel 615-793-5573 or (866) 595-8724/ Fax 615-793-5572 Email: dave@swampsdiesel.com Regulated Fuel Return

More information

Castle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine

Castle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine Castle Model TSM-35 Heavy Duty Screw Pocket Machine For Models with Serial Number 63658 and Above Items Included with Machine Part No. Description Qty B02964 9/64" Castle Premium Brad Point Drill Bit w/

More information

ASSEMBLY MANUAL. Keep With Operator s Manual

ASSEMBLY MANUAL. Keep With Operator s Manual ASSEMBLY MANUAL Keep With Operator s Manual 2-6347 VALVE AND PLUMBING KIT INSTRUCTIONS SMC 64Q LOADER KUBOTA TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB B2150DT & B2150HSD X X B8200DT & B8200HSD X X B9200DT

More information

A N Fittings versus JI C Fittings

A N Fittings versus JI C Fittings A N Fittings versus JI C Fittings A N Fittings : AN fittings are a flare fitting, using 37 flared tubing to form a metal-metal seal. The A N thread is a particular type of fitting used to connect flexible

More information

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560 Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;

More information

Form No , 9 5, 6. Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP. Max. Capacity: 10,000 PSI

Form No , 9 5, 6. Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP. Max. Capacity: 10,000 PSI Form No. 101249 Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP Max. Capacity: 10,000 PSI Air Motor Assembly See sheet 3 of 6 13 12 1 11 10 8, 9 Basic Pump Assembly See sheet 4 of 6

More information

Hose, Tubes & Ducting. Hose, Tubes & Ducting

Hose, Tubes & Ducting. Hose, Tubes & Ducting Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with

More information

Macro LNG automotive_last Update January 17 th 2017

Macro LNG automotive_last Update January 17 th 2017 Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent

More information

> Vacuum Brake Standard automotive vacuum brake (NABT)...Nylon air brake tubing, color coded...105

> Vacuum Brake Standard automotive vacuum brake (NABT)...Nylon air brake tubing, color coded...105 BRAKE >, Compressor 3245E...Standard...101 3245G...Heavy duty...101 3245T...Low temperature...102 3658C (C5C)...Higher pressure, wire braid reinforced, use field-attachable couplings...102 3658E (C5E)...Higher

More information

Self Cleaning Suction Screen

Self Cleaning Suction Screen Effective 1/1/09 WATERMASTER Self Cleaning Suction Screen All galvanized construction with a heavy duty steel body with #3 expanded metal steel lid covered by #8 mesh, 20 gauge stainless cloth screen.

More information

Beverage Master Parts List. Part 8 of 13: Fittings. Issued: March 9, Toll Free:

Beverage Master Parts List. Part 8 of 13: Fittings. Issued: March 9, Toll Free: Beverage Master Parts List Issued: March 9, 2012 Part 8 of 13: Fittings Our most popular fittings are shown in this section, but many other fittings are available. If you don t find what you are looking

More information

Hose, Tubes & Ducting. Hose, Tubes & Ducting

Hose, Tubes & Ducting. Hose, Tubes & Ducting Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with

More information

TUBING, FITTINGS & CLAMPS

TUBING, FITTINGS & CLAMPS STAINLESS STEEL STEPLESS CLAMPS TUBING, FITTINGS & CLAMPS Constructed with Stainless Steel and available in a range of sizes that provide a fast and simple 360º seal. -505R suffix has a band width of 5.0

More information

CAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS

CAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS Sec.1 Sec. 10 CAPS & CONNECTORS Vinyl Vacuum Caps Can be used for capping lines and hoses while testing carburetors, emission control systems, vacuum lines etc. Color coded for size identification. Fits

More information

How to Identify Fluid Ports and Connectors

How to Identify Fluid Ports and Connectors How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With

More information

VALVE AND PLUMBING KIT INSTRUCTIONS SMC 84Q & 2408 LOADERS NEW HOLLAND TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB 1720 X X X 1920 X X X

VALVE AND PLUMBING KIT INSTRUCTIONS SMC 84Q & 2408 LOADERS NEW HOLLAND TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB 1720 X X X 1920 X X X ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT INSTRUCTIONS SMC 84Q & 2408 LOADERS NEW HOLLAND TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB 1720 X X X 1920 X X X TRACTOR AND VALVE KIT GENERAL

More information

VALVE ASSEMBLY. Form No "A" "A" Parts List for: (1/4 N.P.T.F.-REF.) (1/4 N.P.T.F.-REF.)

VALVE ASSEMBLY. Form No A A Parts List for: (1/4 N.P.T.F.-REF.) (1/4 N.P.T.F.-REF.) Parts List for: Form No. 108100 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800)

More information

NEW YORK AIR BRAKE. Air Hose Products. Catalog & Application Guide/ Freight Car & Locomotive

NEW YORK AIR BRAKE. Air Hose Products. Catalog & Application Guide/ Freight Car & Locomotive NEW YORK AIR BRAKE Air Hose Products Catalog & Application Guide/ Freight Car & Locomotive P R O D U C T I V I T Y T H R O U G H T E C H N O L O G Y Air Hose Assemblies & Fittings New York Air Brake is

More information

Tubing and Accessories

Tubing and Accessories Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3

More information

Connection 1 Connection 2 ft m in mm psi bar in mm

Connection 1 Connection 2 ft m in mm psi bar in mm RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability, and safe performance at an economical price.. Constructed with four spiral layers of high tensile

More information

LIFEMIST NT WATER DISTILLER

LIFEMIST NT WATER DISTILLER LIFEMIST NT WATER DISTILLER REPLACEMENT PARTS MANUAL AND WIRING SCHEMATIC FOR MODEL: NT, LM-AED-1 & LM-APK-1 PART # 500033 500035 500034 SERIES 0014 0002 0001 02/08/11 PAGE 1 097079-S14A 02/08/11 PAGE

More information

Small bending radius of only 4-5 times the internal diameter. Burst Pressure. Working Pressure. (kgf/cm2) (at 20 C) (kgf/cm2) (at 20 C) ALL 0002

Small bending radius of only 4-5 times the internal diameter. Burst Pressure. Working Pressure. (kgf/cm2) (at 20 C) (kgf/cm2) (at 20 C) ALL 0002 240 HOSES Yellow Air Hose Light in weight and very durable. Small bending radius of only 4-5 times the internal diameter. ALL 0001 The 2-ply polyestter yarn braided construction delivers high working and

More information

Form No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A

Form No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A Parts List for: Form No. 000339 RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW 3 9, 0 4 5 6 6 5 4, 3 9,0 SPX Hydraulic Technologies, Rockford, IL 609 USA powerteam.com

More information

Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Curb Stops and Meter Valves

Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Curb Stops and Meter Valves DQS Inc. Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10002505 Ford Curb Stops and Meter Valves Contents Page Information Product ing System...3 Features of Ball Valves...4....5

More information

Neoprene. Steel or Brass

Neoprene. Steel or Brass The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose

More information

FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC

FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200, TA1600 & TA2400 SPRAYERS Serial Number B26720100 & Higher Part No. 407525 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol identifies

More information

LITTLE SOIL SQUIRT. RF809-4 LITTLE SOIL SQUIRT (Completely assembled unit) $ (Weight 110 Pounds) Effective February 17,

LITTLE SOIL SQUIRT. RF809-4 LITTLE SOIL SQUIRT (Completely assembled unit) $ (Weight 110 Pounds) Effective February 17, LITTLE SOIL SQUIRT RF809-4 LITTLE SOIL SQUIRT (Completely assembled unit) $1800.00 (Weight 110 Pounds) INCLUDES: 12-volt ½ HP explosion-proof motor #0-4814 $600.00 See page 2 #4001N-A Hypro Pump $253.00

More information

Compression Style Transportation

Compression Style Transportation Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube

More information

Hand Beading Tool.12 Hand Tube Bender.13 EZ-Beading Tool.14 PTFE Tape & Paste...15 Pressure Test Kit.15 Aluminium Wrenches.16 Aluminium Vice Jaws.

Hand Beading Tool.12 Hand Tube Bender.13 EZ-Beading Tool.14 PTFE Tape & Paste...15 Pressure Test Kit.15 Aluminium Wrenches.16 Aluminium Vice Jaws. Table of Contents Fabrication Parts Male Weld-on Adapters 2 Female Weld-on Adapters...2 Aluminium Weld Bends 3 Alloy Bends.... 3 Wiggins Weld-on Adapters..4 Wiggins Connectors.5 Cores..6 Radiator Necks..7

More information

Automotive Plumbing Catalog

Automotive Plumbing Catalog Automotive Plumbing Catalog Metal Tubing Tube Nuts Weld-On Studs Tube Unions Clips and Brackets Bulkhead Nuts Tees Thread Adapters Bump Tube Adapters Transmission Line Adapters Copper Washers Banjo Bolts

More information

MODEL B ELECTRIC HYDRAULIC PUMP

MODEL B ELECTRIC HYDRAULIC PUMP SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00

More information

Pistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible

Pistol Grease Guns. AC475 comes complete with 4 steel extension and 4-jaw coupler with ball check AC476 comes complete with 18 flexible Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:

More information

Composite Push-In Fittings BSP/Metric Series 7000

Composite Push-In Fittings BSP/Metric Series 7000 2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,

More information

Section 8. Parts A Issued 7/00. Manual V -MA -01 (formerly 7-505/6V -MA -01) E 2000 Nordson Corporation All rights reserved

Section 8. Parts A Issued 7/00. Manual V -MA -01 (formerly 7-505/6V -MA -01) E 2000 Nordson Corporation All rights reserved Section 8 E 000 Nordson Corporation 00 497A Manual 47-506V -MA -0 (formerly 7-505/6V -MA -0) 8-0 Manual 47-506V -MA -0 (formerly 7-505/6V -MA -0) 00 497A E 000 Nordson Corporation 8- Section 8. Introduction

More information

Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last

Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run

More information

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls

More information

Couplings, hose clamps and pneumatics

Couplings, hose clamps and pneumatics Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)...

More information

Rubber Hose, Fittings & Assemblies for Aerospace Applications

Rubber Hose, Fittings & Assemblies for Aerospace Applications Aeroquip Rubber Hose, Fittings & Assemblies for Aerospace Applications Lightweight and Flexible Qualified to Industry Standards Table of Contents 306 Low Pressure Hose, Fittings and Assemblies 1 303, 302A

More information

Table of Contents. Page. See Catalog and Product Updates on our Website

Table of Contents. Page. See Catalog and Product Updates on our Website 2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13

More information