Hydraulic Hoses, Fittings and Equipment

Size: px

Start display at page:

Download "Hydraulic Hoses, Fittings and Equipment"

Hillary Randall
5 years ago
Views:

1 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic s, Fittings and Equipment

s and Fittings The perfect range for the more

range contains the Elite No-Skive compact

selection of compatible No-Skive fittings in

Extended range of working temperatures: -50 C

compatibility; oil, water, phosphate ester etc.

less weight long service life still assured

increased service life Small bend radii and

weight are determining factors High abrasion

requirements, extending service life High

weathering and ageing resistance Parkrimp

assembly operation hose assemblies meet CE

2 s and Fittings The perfect range for the more demanding market requirements This medium hose range contains the Elite No-Skive compact hydraulic hoses exceeding ISO and EN specifications and the classic No-Skive hydraulic hoses according to ISO, EN and SAE specifications. This hose range is complemented by a full selection of compatible No-Skive fittings in steel and stainless steel. Extended range of working temperatures: -50 C up to +150 C Selected hoses feature nitrile inner tubes suitable for mineral and bio-degradable oils Full range of fluid compatibility; oil, water, phosphate ester etc. Using high quality compounds allows thin covers less weight long service life still assured High flexibility for easier installation and increased service life Small bend radii and light weight for applications where space and weight are determining factors High abrasion resistance hose covers superior to ISO 6945 requirements, extending service life High ozone-resistant cover compounds extending weathering and ageing resistance Parkrimp machines, portable or bench mount for easy assembly operation hose assemblies meet CE directives Complete No-Skive fitting technology across the full range of medium hoses providing simpler, quicker and safer hose assembly Applications The definitve hose range for all medium- applications

3 Parkrimp No-Skive The system for fast and leak-free assemblies The perfect match The complete system from one source. No-Skive hose, No-Skive fitting and crimping machine with world-wide guarantee and availability. Parker s colour-coded die sets Parkalign No loose parts to mismatch or misplace die set segments linked together. Die sets provide 360 evenly applied crimping forces for an ideal crimp result. Parker s exclusive Parkalign positions the fitting in the dies perfectly every time. Parkrimp No-Skive No skiving tool needed No need to remove the cover Crimps one-piece fittings Parkalign positions the fittings in the dies perfectly every time Quick and easy: no gauges to set on the machine Portable machines for field repair Meets EN safety regulations KarryKrimp 2 KarryKrimp 2 KarryKrimp 1 Parkrimp Bench Mount

No-Skive s for reliability, performance, sustainability and prevention Designers of hydraulic machinery are increasingly defining new products that require

The option to use flexible connections that are tested over and above the generally accepted norms and specifications and, that offer reliability and performance to

fittings. They often tend towards well known and established names on the market, where real-world long life and dependability have been proven.

In the case of a hydraulic hose line that primarily means the integrity of its connection.

Leakfree No-Skive hose assembly Performance Particularly challenging are applications in earth-moving and construction machinery that require higher performance

The Elite low temperature hose 461LT can be used in applications with an ambient temperature of down to -50 C.

4 No-Skive s for reliability, performance, sustainability and prevention Designers of hydraulic machinery are increasingly defining new products that require hydraulic circuits with tighter curves, higher s and less space in which to route flexible connections and achieve a solution. The option to use flexible connections that are tested over and above the generally accepted norms and specifications and, that offer reliability and performance to the highest market standards, give peace of mind and the possibility to enhance the reputation and dependability of products developed by engineering and design departments. To meet hydraulic application demands for reliability and performance, engineers typically look at medium braided hose ranges with a compact design and no-skive fittings. They often tend towards well known and established names on the market, where real-world long life and dependability have been proven. Reliability One of the most important factors engineers look for is reliability. In the case of a hydraulic hose line that primarily means the integrity of its connection. s that use the Parker No-Skive technology, such as the Elite range from Parker, are the preferred choice for all medium mobile and industrial applications. Leakfree No-Skive hose assembly Performance Particularly challenging are applications in earth-moving and construction machinery that require higher performance from the hoses they use in terms of flexibility, a tight bending radius and resistance to very low temperatures. The Elite low temperature hose 461LT can be used in applications with an ambient temperature of down to -50 C. Low temperature hose 461LT Sustainability Sustainability is a strategy that underlines many initiatives, integrating life cycles assessment into the product development process for leading, responsible manufacturers. Transparency in the use of chemicals, processes and materials and utilising technical know-how and engineering skills are key to meet this increasingly important and globally relevant requirements. Therefore the development of the new 462CLF with pure chlorinefree tube and cover compound is our contribution for ensuring the sustainability of our planet. This hose type is environmental friendly from production to disposal. Chlorine-free hose 462ClF

No-Skive s with outstanding technical properties Chrome6-free fittings The wire braided Elite No-Skive hose range with outstanding technical properties such as superior flexibility, tighter bend

The range also includes a new chlorine-free hose type with a smooth pure nitrile inner tube a hose which is environmentally friendly from production to disposal and that with an excellent chemical

5 No-Skive s with outstanding technical properties Chrome6-free fittings The wire braided Elite No-Skive hose range with outstanding technical properties such as superior flexibility, tighter bend radii and tough or super tough hose cover exceeds the EN specifications and meets the OEM and MRO requirements of today and tomorrow! The range also includes a new chlorine-free hose type with a smooth pure nitrile inner tube a hose which is environmentally friendly from production to disposal and that with an excellent chemical resistance. Prevention High performance most often goes hand-in-hand with long life and reliability which translates into reduced machine downtime caused by hose assembly failure. However, through a preventive maintenance program, unexpected, unscheduled and costly downtime can be largely avoided. A Preventive Maintenance Program may comprise regular checks of the hydraulic circuit and of all the flexible parts that compose it. Identification systems such as the Parker Tracking System (PTS) are designed to help customers reduce vehicle or asset downtime through increases in speed, timing and accuracy of necessary repairs. Exceeds EN 857 Long Service Life Service not due Innovative Products Extended temperature -50 Abrasion resistance Standard Cover +100 ST Cover Exceeds European specifications higher abrasion resistance higher ratings long service life achieved through implementing nitrile inner tubes for better fluid compatibility tested and approved hose and fitting combinations innovative product line with excellent technical characteristics high flexibility tight bending radii compact thin cover hoses No-Skive technology temperature range up to +125 C down to -50 C for low temperature (LT) hoses extreme abrasion resistance > 1 Mio cycles with ST cover according to ISO 6945 (which represents 450 times the standard cover)

6 Universal Push-to-Connect (UPTC) The unique push-in system for tubes and hoses Visual assembly inspection Stainless steel security ring HNBR seal System nut Standard 24 DIN fitting body As a standard solution it s a stroke of genius Parker s UPTC is the standardised push-in system for Parker 24 DIN fitting bodies. In use with tube and hose Because of its flexibility, UPTC is a unique push-in system for tube and hose terminations. Assembly Simply introduce the hose or tube into the worksassembled fitting and push in. Assembled connector Simple Visual assembly inspection Marker inside the nut = unambiguous assembly results Safe Security ring locks in place Termination is held in the connector Leak-proof Elastomeric seal 100 % leak-proof Examples Disassembly Removable and fit for reassembly just like conventional screw fittings possible even in very dirty conditions Repair-friendly No special tools required For more information about UPTC please refer to pages Cb-47 and Cb-48

7 Index Parkrimp No-Skive s Page 301SN Standard Ca-1 301TC High abrasion resistance Ca Standard Ca Phosphate Ester Ca-4 351TC High abrasion resistance Ca Pilot Ca Pilot Ca-7 412ST Pilot Ca-8 421RH Railway Ca-9 421SN Standard Ca WC Wire cover Ca Standard Ca Phosphate Ester Ca Low / High temperature Ca Low / High temperature Ca Standard Ca RH Railway Ca TC High abrasion resistance Ca LT Low / High temperature Ca Standard Ca ClF Chlorine Free Ca ST Extreme abrasion resistance Ca TC High abrasion resistance Ca Water cleaning Ca TC / 472TC High abrasion resistance Ca Powerlift Ca ST Powerlift Ca Standard Ca ST Extreme abrasion resistance Ca Water cleaning Ca Extremely flexible Ca Twin Extremely flexible Ca Suction Ca S Suction Ca Suction Ca-35 Index Fittings 43 Series 2piece Series 48 DIN Metric Cb-1 Cb-4 Cc-1 Cc-11 BSP Cb-5 Cb-8 Cc-12 Cc-20 SAE Cb-9 Cb-11 Cc-21 Cc-28 Cd-1 Flange Cb-12 Cb-14 Cc-29 Cc-33 Cd-2 ORFS Cb-15 Cb-17 Cc-34 Cc-39 JIS Cc-40 Cc-41 French Standard Cc-42 Cc-44 High Pressure Cleaning Cc-45 Cc-46 Others Cc-47 Cc-48 UPTC Cc-49 Cc-50 Parker Hannifin assumes no liability for typographical errors or other errors C-Index

8 Overview Parkrimp No-Skive Standard 421SN SN 302 Ca-10 Ca-12 Ca-1 Ca-3 No-Skive EN 853 1SN ISO 1436 Type Ca-16 ISO SN 492 Ca-28 No-Skive No-Skive EN 853 2SN ISO 1436 Type Ca-20 No-Skive EN 853 2SN ISO S 1436 Elite No-Skive ISO Type R16 SAE 100R16 Chlorine Free 462ClF Ca-21 Elite No-Skive Compact EN 857 1SC ISO Type 1SC Elite No-Skive Compact Exceeds EN 857-2SC ISO Type 2SC Elite No-Skive Chlorine Free Exceeds EN 857-2SC ISO Type 2SC High abrasion resistance 301TC 351TC Ca-2 Ca-5 451TC Ca TC Ca-23 No-Skive Tough Cover EN 853 2SN ISO 1436 Type 2 471TC / 472TC Ca-25 No-Skive Tough Cover ISO Type R19 SAE 100R19 No-Skive Tough Cover ISO Type R17 SAE 100R17 Elite No-Skive Compact Tough Cover Exceeds EN 857-2SC ISO Type 2SC No-Skive EN 857 2SC ISO Type 2SC Extreme abrasion resistance 492ST 462ST Ca-29 Ca-22 Elite No-Skive Super Tough Compact EN 857 1SC ISO Type 1SC Low / High temperature 426 Ca-14 Elite No-Skive Super Tough Compact EN 857 2SC ISO Type 2SC 436 Ca LT Ca-19 No-Skive SAE 100R1AT high temperature No-Skive Compact SAE 100R16 high temperature Elite No-Skive Compact EN 857 2SC low temperature Ca-Index

9 Overview Parkrimp No-Skive Phosphate Ester Ca-13 Ca-4 No-Skive Phosphate ester resistant hose Railway 441RH Ca-17 No-Skive Phosphate ester resistant hose 421RH Ca-9 No-Skive Compact Fire-retardant cover Water cleaning 493 Ca-30 No-Skive Fire-retardant cover 463 Ca-24 No-Skive Compact High water cleaning applications No-Skive Compact High water cleaning applications Pilot ST Ca-6 Ca-7 Ca-8 Elite No-Skive Compact Pilot line applications Elite No-Skive RemoFlex 1 wire braided hose for pilot lines Elite No-Skive RemoFlex 1 wire braided hose for pilot lines Wire cover 421WC Ca-11 No-Skive Galvanised steel wire cover Ca-Index

10 Overview Parkrimp No-Skive Powerlift 477 Ca ST Ca-27 Elite No-Skive PowerLift 2 wire braided Elite No-Skive PowerLift 2 wire braided Extremely flexible Twin Ca-31 Ca-32 No-Skive Compact Constant, tight bend radius Suction 811 Ca-33 No-Skive Compact Twin constant, tight bend radius 811S Ca Ca-35 No-Skive Suction and Return Line SAE 100R4 No-Skive Suction and Return Line Exceeds SAE 100R4 No-Skive Suction and Return Line SAE 100R4 Ca-Index

11 DN Standard Parkrimp No-Skive 301SN 301SN No-Skive EN 853 2SN ISO 1436 Type 2 Primary Applications General medium hydraulic applications No-Skive thin cover hose construction Nitrile (NBR) inner tube extended fluid compatibility Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications EN 853 2SN ISO 1436 Type 2 SAE 100R2AT Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 301SN <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 301SN-4 6 1/ SN-5 8 5/ SN / SN / SN / SN / SN SN / SN / SN The combination of high temperature and high could reduce the hose life. weight layline example PARKER NO-SKIVE 301SN-4 WP 40,0 MPa (400 BAR) l SAE100R2AT-4 6,3MM (1/4 ) X 2W EN853/2SN/6/DIN Ca-1

12 DN High abrasion resistance Parkrimp No-Skive 301TC 301TC No-Skive Tough Cover EN 853 2SN ISO 1436 Type 2 Primary Applications General medium hydraulic applications where high abrasion is required Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications EN 853 2SN ISO 1436 Type 2 SAE 100R2AT Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: MSHA approved synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive thin cover hose construction Nitrile (NBR) inner tube extended fluid compatibility Highly abrasion resistant MSHA approved is suitable for temporary immersion in mineral oil up to 70 C with frequent inspections Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 301TC <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 301TC-4 6 1/ TC-5 8 5/ TC / TC / TC / TC / TC TC / TC / TC Replace the hose when any deformation or damage on the hose cover are visible. The combination of high temperature and high could reduce the hose life. weight layline example Ca-2

13 DN Parkrimp No-Skive Standard No-Skive EN 853 2SN ISO S 1436 Primary Applications General medium hydraulic applications Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications EN 853 2SN ISO S 1436 SAE 100R2AT Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Meets ISO 1436 Worldwide availabilty Worldwide consistent appearance, part number and functionality No-Skive thin cover hose construction Extended fluid compatibility (including biodegradable oils) Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 302 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / / / / The combination of high temperature and high could reduce the hose life. weight layline example 302/301-8 Worldwide WP 28,0 MPa (4000 PSI) ISO /2SN / SAE 100R2 12,5 mm (1/2) X 2W 2Q05 MADE IN Ca-3

14 DN Parkrimp No-Skive Phosphate Ester No-Skive Phosphate ester resistant hose Primary Applications Aerospace, foundries, steel mills: Medium hydraulic applications with phosphate ester fluids Applicable Specifications Parker specification Restrictions Do not allow tube to contact any petroleum base fluids. Use liquid soap as hose lubricant. Construction Tube: EPDM synthetic rubber Reinforcement: Two high-tensile steel wire braids Cover: Phosphate ester and weather resistant, green, EPDM synthetic rubber cover Temperature Range C up to +80 C Exception: Air... max. +70 C Water, water glycol fluids... max. +85 C No-Skive thin cover hose construction Phosphate ester and weather resistant, green, EPDM synthetic rubber cover SAE 100R2 rating Recommended Fluids Phosphate ester based hydraulic fluids, water-glycol based fluids, air and water. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Series 43 for sizes -4 to -32 Series 48 for sizes -20 to -32 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 304 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / / The combination of high temperature and high could reduce the hose life. weight layline example NO-SKIVE WP 24,0 MPa (3500 PSI) 12,5 mm (1/2) X 2W 3Q78 Ca-4

DN High abrasion resistance Parkrimp No-Skive 351TC 351TC No-Skive Tough Cover ISO 11237 Type R19 SAE 100R19 Primary Applications General medium hydraulic applications where higher abrasion

15 DN High abrasion resistance Parkrimp No-Skive 351TC 351TC No-Skive Tough Cover ISO Type R19 SAE 100R19 Primary Applications General medium hydraulic applications where higher abrasion resistance is required Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications ISO Type R19 SAE 100R19 Construction Tube: Synthetic rubber Reinforcement: Two high-tensile steel wire braids Cover: MSHA approved synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive thin cover hose construction Constant working of 28.0 MPa Highly abrasion resistant MSHA approved is suitable for temporary immersion in mineral oil up to 70 C with frequent inspections Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48ge Pressure Rating I.D. O.D. max. working min. burst min. bend radius 351TC <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 351TC-4 6 1/ TC / TC / TC / TC / Replace the hose when any deformation or damage on the hose cover are visible. The combination of high temperature and high could reduce the hose life. weight layline example Ca-5

DN Parkrimp No-Skive Pilot 402 402 Elite No-Skive Compact Pilot line applications No-Skive thin cover Compact hose Constant working of 10.

16 DN Parkrimp No-Skive Pilot Elite No-Skive Compact Pilot line applications No-Skive thin cover Compact hose Constant working of 10.0 MPa Primary Applications Mobile hydraulic: Pilot lines Construction Tube: Nitrile (NBR) Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Available as complete hose assembly Compatible with 2-piece fittings for use with adjustable crimpers only (47 series nipple and series shell) Pressure Rating I.D. O.D. max. working min. burst min. bend radius 402 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / The combination of high temperature and high could reduce the hose life. weight layline example Ca-6

17 DN Parkrimp No-Skive Pilot Elite No-Skive RemoFlex 1 wire braided hose for pilot lines No-Skive hose construction 12.0 MPa rubber pilot line hose (20 % higher working than 402 hose) Very tight bending radii allowing compact machine design Primary Applications Mobile hydraulic equipment: Pilot lines Construction Tube: Nitrile (NBR) Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Available as complete hose assembly Compatible with 2-piece fittings for use with adjustable crimpers only (47 series nipple and series shell) Pressure Rating I.D. O.D. max. working min. burst min. bend radius 412 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / The combination of high temperature and high could reduce the hose life. weight layline example Ca-7

18 DN Pilot Parkrimp No-Skive 412ST 412ST Elite No-Skive RemoFlex 1 wire braided hose for pilot lines No-Skive hose construction 12.0 MPa rubber pilot line hose (20 % higher working than 402 hose) Very tight bending radii allowing compact machine design Extreme abrasion resistant cover Primary Applications Mobile hydraulic equipment: Pilot lines Construction Tube: Nitrile (NBR) Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber with a special polyethylene coating Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Available as complete hose assembly Compatible with 2-piece fittings for use with adjustable crimpers only (47 series nipple and series shell) Pressure Rating I.D. O.D. max. working min. burst min. bend radius 412ST <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 412ST-3 5 3/ ST-4 6 1/ ST-5 8 5/ ST / The combination of high temperature and high could reduce the hose life. weight layline example Ca-8

19 DN Railway Parkrimp No-Skive 421RH 421RH No-Skive Fire-retardant cover Primary Applications General medium- hydraulic and pneumatic systems as well as water and oil cooling circuits Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications EN 853 1SN ISO 1436 Typ 1 SAE 100R1AT Construction Tube: Nitrile (NBR) Reinforcement: One high-tensile steel wire braid Cover: Fire retardant synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive thin cover hose construction Nitrile (NBR) inner tube extended fluid compatibility Suitable with 48 series fittings Fire-retardant cover Railway approved as follow: European Standard EN ISO15540: HL2 (without the need of FS-F-Fire Sleeve) Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air and gas above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 421RH <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 421RH / RH / RH The combination of high temperature and high could reduce the hose life. weight layline example Ca-9

20 DN Standard Parkrimp No-Skive 421SN 421SN No-Skive EN 853 1SN ISO 1436 Type 1 Primary Applications General medium hydraulic applications No-Skive thin cover hose construction Nitrile (NBR) inner tube extended fluid compatibility Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications EN 853 1SN ISO 1436 Type 1 SAE 100R1AT Construction Tube: Nitrile (NBR) Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 421SN <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 421SN-4 6 1/ SN-5 8 5/ SN / SN / SN / SN / SN SN / SN / SN The combination of high temperature and high could reduce the hose life. weight layline example PARKER NO-SKIVE 421SN-8 WP 16,0 MPa (160 BAR) l * * SAE 100R1AT-8 12,5 MM (1/2) X1W EN 853/1SN/12/DIN Ca-10

DN Wire cover Parkrimp No-Skive 421WC 421WC No-Skive Galvanised steel wire cover No-Skive thin cover hose construction Metal and glass hot-spot resistance Primary Applications Machine tool and glass

21 DN Wire cover Parkrimp No-Skive 421WC 421WC No-Skive Galvanised steel wire cover No-Skive thin cover hose construction Metal and glass hot-spot resistance Primary Applications Machine tool and glass industry Applicable Specifications SAE 100 R1AT Construction Tube: Synthetic rubber Reinforcement: One high-tensile steel wire braid Cover: Galvanized steel wire Temperature Range C up to +125 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 43 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 421WC <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 421WC-4 6 1/ WC / WC / WC / WC The combination of high temperature and high could reduce the hose life. weight Ca-11

22 DN Parkrimp No-Skive Standard ISO SN No-Skive Primary Applications General medium hydraulic applications Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications ISO 1436 EN 853 1SN SAE 100R1AT Construction Tube: Nitrile (NBR) Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Meets ISO 1436 Worldwide availabilty Worldwide consistent appearance, part number and functionality No-Skive thin cover hose construction Nitrile (NBR) inner tube extended fluid compatibility Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 422 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / / / / The combination of high temperature and high could reduce the hose life. weight layline example 422/421-8 Worldwide WP 16,0 MPa (2325 PSI) ISO /1SN / SAE 100R1 12,5 mm (1/2) X 1W 2Q05 MADE Ca-12

DN Parkrimp No-Skive Phosphate Ester 424 424 No-Skive Phosphate ester resistant hose Primary Applications Aerospace, foundries, steel mills: Medium hydraulic applications with phosphate ester fluids

23 DN Parkrimp No-Skive Phosphate Ester No-Skive Phosphate ester resistant hose Primary Applications Aerospace, foundries, steel mills: Medium hydraulic applications with phosphate ester fluids Applicable Specifications Parker specification Restrictions Do not allow tube to contact any petroleum base fluids. Use liquid soap as hose lubricant. Construction Tube: EPDM synthetic rubber Reinforcement: One high-tensile steel wire braid Cover: Phosphate ester and weather resistant, green, EPDM synthetic rubber cover Temperature Range C up to +80 C Exception: Air... max. +70 C Water, water glycol fluids... max. +85 C No-Skive thin cover hose construction SAE 100R1 rating Phosphate ester and weather resistant,green, EPDM synthetic rubber cover Recommended Fluids Phosphate ester based hydraulic fluids, water-glycol based fluids, air and water. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 43 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 424 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / The combination of high temperature and high could reduce the hose life. weight layline example NO-SKIVE WP 13,8 MPa (2000 PSI) 12,5 mm (1/2) X 1W 2Q98 Ca-13

DN Parkrimp No-Skive Low / High temperature 426 426 No-Skive SAE 100R1AT high temperature Primary Applications Medium hydraulic applications at high temperature Type Approvals Details please find on

24 DN Parkrimp No-Skive Low / High temperature No-Skive SAE 100R1AT high temperature Primary Applications Medium hydraulic applications at high temperature Type Approvals Details please find on pages Ab-16 to Ab-19 No-Skive thin cover hose construction SAE 100R1 rating Ideal for high temperature applications Applicable Specifications SAE 100 R1AT Construction Tube: PKR synthetic rubber Reinforcement: One high-tensile steel wire braid Cover: Blue synthetic rubber Temperature Range C up to +150 C Exception: Air... max. +70 C Water, water glycol fluids... max. +85 C Recommended Fluids Petroleum hydraulic fluids, lubricating oils, water-glycol based fluids, air and water. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Series 43 for sizes -4 to -6 Series 48 for sizes -8 to -32 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 426 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg RL 6 1/ RL 10 3/ RL 12 1/ RL 16 5/ RL 19 3/ RL / / The combination of high temperature and high could reduce the hose life. RL = only available on reels. weight layline example NO-SKIVE WP 14,0 MPa (2000 PSI) MSHA XXXX SAE 100R1AT-8 HI-TEMP 12,5 mm (1/2) 1Q03 Ca-14

DN Parkrimp No-Skive Low / High temperature 436 436 No-Skive Compact SAE 100R16 high temperature Primary Applications Medium hydraulic applications at high temperature Type Approvals Details please

25 DN Parkrimp No-Skive Low / High temperature No-Skive Compact SAE 100R16 high temperature Primary Applications Medium hydraulic applications at high temperature Type Approvals Details please find on pages Ab-16 to Ab-19 No-Skive thin cover hose construction Compact hose construction with tight bend radius MSHA approved Ideal for high temperature applications Applicable Specifications SAE 100R16 Construction Tube: PKR synthetic rubber Reinforcement: Two high-tensile steel wire braids Cover: MSHA approved blue synthetic rubber Temperature Range C up to +150 C Exception: Air... max. +70 C Water, water glycol fluids... max. +85 C Recommended Fluids Petroleum hydraulic fluids, lubricating oils, water-glycol based fluids, air and water. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 436 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg BLU-RL 10 3/ BLU-RL 12 1/ BLU-RL 16 5/ BLU-RL 19 3/ BLU-RL The combination of high temperature and high could reduce the hose life. RL = only available on reels. weight layline example NO-SKIVE WP 24,5 MPa (3500 PSI) MSHA XXXX 12,5 mm (1/2) X 2W 2Q88 Ca-15

26 DN Parkrimp No-Skive Standard Elite No-Skive ISO Type R16 SAE 100R16 Primary Applications Many industrial and mobile applications, with typical usage seen on agricultural machines or in power steering circuits No-Skive hose construction One wire braid construction two wire braid performance +125 C working temperature Applicable Specifications ISO Type R16 SAE 100R16 Construction Tube: Synthetic rubber Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber Temperature Range C up to +125 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Pressure Rating I.D. O.D. max. working min. burst min. bend radius 441 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / / The combination of high temperature and high could reduce the hose life. Also available on reels up to size -12 under part number 441-xx-RL weight layline example Ca-16

27 DN Railway Parkrimp No-Skive 441RH 441RH No-Skive Compact Fire-retardant cover Primary Applications General medium- hydraulic and pneumatic systems as well as water and oil cooling circuits Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications Parker specification; Working to SAE 100R2; Bend radius to SAE 100R16 Construction Tube: Synthetic rubber Reinforcement: One high-tensile steel wire braid Cover: Fire retardant synthetic rubber Temperature Range C up to +125 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction One wire braid construction two wire braid performance +125 C working temperature Fire-retardant cover Railway approved as follow: European Standard EN ISO15540: HL2 (without the need of FS-F-Fire Sleeve) Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air and gas above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Pressure Rating I.D. O.D. max. working min. burst min. bend radius 441RH <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 441RH-4 6 1/ RH-5 8 5/ RH / RH / RH / RH / RH The combination of high temperature and high could reduce the hose life. weight layline example Ca-17

DN High abrasion resistance Parkrimp No-Skive 451TC 451TC No-Skive Tough Cover ISO 11237 Type R17 SAE 100R17 Primary Applications General medium hydraulic applications where higher abrasion

28 DN High abrasion resistance Parkrimp No-Skive 451TC 451TC No-Skive Tough Cover ISO Type R17 SAE 100R17 Primary Applications General medium hydraulic applications where higher abrasion resistance is required. Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications ISO Type R17 SAE 100R17 Construction Tube: Nitrile (NBR) Reinforcement: One or two high-tensile steel wire braids Cover: MSHA approved synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive thin cover hose construction Constant working of 21.0 MPa Highly abrasion resistant MSHA approved is suitable for temporary immersion in mineral oil up to 70 C with frequent inspections Nitrile (NBR) inner tube extended fluid compatibility Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 451TC <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 451TC-4 6 1/ TC / TC / TC / TC / TC Replace the hose when any deformation or damage on the hose cover are visible. The combination of high temperature and high could reduce the hose life. Also available on reels under part number 451-xx-RL weight layline example Ca-18

29 DN Low / High temperature Parkrimp No-Skive 461LT 461LT Elite No-Skive Compact EN 857 2SC low temperature Primary Applications Mobile applications in low temperature environments: Forestry machines, refrigerated warehouses No-Skive thin cover hose construction Excellent ozone resistance Ideal for low temperature working conditions (-50 C) Applicable Specifications EN 857 2SC Construction Tube: Synthetic rubber Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Pressure Rating I.D. O.D. max. working min. burst min. bend radius 461LT <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 461LT-4 6 1/ LT-5 8 5/ LT / LT / LT / LT / LT The combination of high temperature and high could reduce the hose life. weight layline example Ca-19

30 DN Parkrimp No-Skive Standard Elite No-Skive Compact Exceeds EN 857-2SC ISO Type 2SC Primary Applications Demanding medium hydraulic applications in all markets Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications Exceeds EN 857-2SC ISO Type 2SC Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction Compact design Nitrile (NBR) inner tube extended fluid compatibility Exceeding EN/ISO specifications for, bend radius and abrasion resistance Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Size -4 up to WR Pressure Rating I.D. O.D. max. working min. burst min. bend radius 462 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / / WR * / ** / The combination of high temperature and high could reduce the hose life. From size -4 to -16, smooth cover, both WR and wrapped cover Also available in reels up to size -12 under part number 462-xx-RL * WR only with fitting series 46 ** only with fitting series 48 weight layline example Ca-20

31 DN Chlorine Free Parkrimp No-Skive 462CLF 462ClF Elite No-Skive Chlorine Free Exceeds EN 857-2SC ISO Type 2SC Primary Applications Demanding medium hydraulic applications in all markets No-Skive hose construction Compact design Exceeding EN/ISO specifications for, bend radius and abrasion resistance Chlorine free compounds Applicable Specifications Exceeds EN 857-2SC ISO Type 2SC Construction Tube: Chlorine free synthetic rubber Reinforcement: Two high-tensile steel wire braids Cover: Chlorine free synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Size -4 up to Size Pressure Rating I.D. O.D. max. working min. burst min. bend radius 462CLF <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 462CLF-4 6 1/ CLF-5 8 5/ CLF / CLF / CLF / CLF / CLF CLF-20 * / The combination of high temperature and high could reduce the hose life. From size -4 to -16, smooth. For size -20, wrapped. * 462CLF-20 only with 48 series weight layline example Ca-21

32 DN Extreme abrasion resistance Parkrimp No-Skive 462ST 462ST Elite No-Skive Super Tough Compact EN 857 2SC ISO Type 2SC Primary Applications Mobile market: Medium hydraulic applications with extremely high abrasion risks Applicable Specifications EN 857 2SC ISO Type 2SC Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber with a special polyethylene coating Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction Compact design Nitrile (NBR) inner tube extended fluid compatibility Extreme abrasion resistant cover Exceeding EN/ISO specifications for, bend radius and abrasion resistance Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Size -4 up to Size Pressure Rating I.D. O.D. max. working min. burst min. bend radius 462ST <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 462ST-4 6 1/ ST-5 8 5/ ST / ST / ST / ST / ST ST-20 * / The combination of high temperature and high could reduce the hose life. * 462ST-20 only with fitting series 48 weight layline example Ca-22

DN High abrasion resistance Parkrimp No-Skive 462TC 462TC Elite No-Skive Compact Tough Cover Exceeds EN 857-2SC ISO 11237 Type 2SC Primary Applications Demanding medium hydraulic applications in all

33 DN High abrasion resistance Parkrimp No-Skive 462TC 462TC Elite No-Skive Compact Tough Cover Exceeds EN 857-2SC ISO Type 2SC Primary Applications Demanding medium hydraulic applications in all markets Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications Exceeds EN 857-2SC ISO Type 2SC Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: MSHA approved synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction Compact design Nitrile (NBR) inner tube extended fluid compatibility Exceeding EN/ISO specifications for, bend radius and abrasion resistance Highly abrasion resistant MSHA approved Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Size -4 up to Size -20 up to Size -40 up to -48 2piece 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 462TC <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 462TC-4 6 1/ TC-5 8 5/ TC / TC / TC / TC / TC TC-20 * / TC-24 * / TC-32 * TC-40 ** / TC-48 ** The combination of high temperature and high could reduce the hose life. * Size -20 up to -32 only with fitting series 48 ** Size -40 up to -48 only with 2piece fitting series 48 weight layline example 462TC-40 WP 7,0 MPa (1015 PSI) MSHA IC 40/26 63,5 mm (2 1/2) Made in Italy Ca-23

34 DN Parkrimp No-Skive Water cleaning No-Skive Compact High water cleaning applications 2 wire No-Skive Compact design For water up to +120 C constant temperature Primary Applications High water cleaners Construction Tube: Synthetic rubber Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber in black or blue colour Temperature Range...water max C Fitting Series 46 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 463 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / BLU 8 5/ / BLU 10 3/ / BLU 12 1/ weight WKS rubber hand grip for No-Skive high water cleaning hoses can be found on page Eb-17. The combination of high temperature and high could reduce the hose life. Also available on reels under part number 463-xx-RL layline example PARKER NO-SKIVE WP 40,0 MPa (5800 PSI) I 8 mm (5/16) max. 120 C WATER Ca-24

35 DN High abrasion resistance 471TC / 472TC No-Skive EN 857 2SC ISO Type 2SC Parkrimp No-Skive 471TC / 472TC Primary Applications Small bending radii demanding medium hydraulic applications Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications EN 857 2SC ISO Type 2SC Construction Tube 471TC: Synthetic rubber Tube 472TC: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: MSHA approved synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction Compact design 472TC: Nitrile (NBR) inner tube extended fluid compatibility Reduced bend radii Highly abrasion resistant MSHA approved is suitable for temporary immersion in mineral oil up to 70 C with frequent inspections Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 471TC_472TC <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 471TC-4 6 1/ TC-5 8 5/ TC / TC / TC / TC / TC TC / TC / TC Replace the hose when any deformation or damages on the hose cover are visible. The combination of high temperature and high could reduce the hose life. weight layline example Ca-25

DN Parkrimp No-Skive Powerlift 477 477 Elite No-Skive PowerLift 2 wire braided Primary Applications For truck cranes and lifting equipment such as fork lift trucks, aerial lifts, cranes,

36 DN Parkrimp No-Skive Powerlift Elite No-Skive PowerLift 2 wire braided Primary Applications For truck cranes and lifting equipment such as fork lift trucks, aerial lifts, cranes, telehandlers, lifting platforms. Restrictions Should not be used for high impulse hydraulic applications to replace spiral construction hoses. Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction Compact design Tested at 120 % of the maximum working at 400,000 impulses Smaller bend radius and reduced outside diameter bringing a significant advantage in terms of space and weight on compact equipment Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 477 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / / The combination of high temperature and high could reduce the hose life. weight layline example Ca-26

37 DN Powerlift Parkrimp No-Skive 477ST 477ST Elite No-Skive PowerLift 2 wire braided Primary Applications For truck cranes and lifting equipment such as fork lift trucks, aerial lifts, cranes, telehandlers, lifting platforms. Restrictions Should not be used for high impulse hydraulic applications to replace spiral construction hoses. Construction Tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: Synthetic rubber with a special polyethylene coating Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction Compact design Extreme abrasion resistant cover Tested at 120 % of the maximum working at 400,000 impulses Smaller bend radius and reduced outside diameter Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 477ST <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 477ST-4 6 1/ ST-5 8 5/ ST / ST / ST / ST / ST The combination of high temperature and high could reduce the hose life. weight layline example Ca-27

38 DN Parkrimp No-Skive Standard Elite No-Skive Compact EN 857 1SC ISO Type 1SC Primary Applications Demanding medium hydraulic applications Type Approvals Details please find on pages Ab-16 to Ab-19 Applicable Specifications EN 857 1SC ISO Type 1SC Construction Tube: Nitrile (NBR) Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction Compact design Nitrile (NBR) inner tube extended fluid compatibility Exceeding EN/ISO specifications for, bend radius and abrasion resistance Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 46 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 492 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / / WR / without a suffix: the hose cover has a smooth appearance. with a suffix (WR): the hose cover has a wrapped appearance. The combination of high temperature and high could reduce the hose life. Also available in reels up to size -16 under part number 492-xx-RL weight layline example Ca-28

DN Extreme abrasion resistance Parkrimp No-Skive 492ST 492ST Elite No-Skive Super Tough Compact EN 857 1SC ISO 11237 Type 1SC Primary Applications Mobile market: Medium hydraulic applications with

39 DN Extreme abrasion resistance Parkrimp No-Skive 492ST 492ST Elite No-Skive Super Tough Compact EN 857 1SC ISO Type 1SC Primary Applications Mobile market: Medium hydraulic applications with extremely high abrasion risks Applicable Specifications EN 857 1SC ISO Type 1SC Construction Tube: Nitrile (NBR) Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber with a special polyethylene coating Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C No-Skive hose construction Compact design Nitrile (NBR) inner tube extended fluid compatibility Extreme abrasion resistant cover Exceeding EN/ISO specifications for, bend radius and abrasion resistance Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 46 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 492ST <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg 492ST-4 6 1/ ST-5 8 5/ ST / ST / ST / ST / ST ST / The combination of high temperature and high could reduce the hose life. weight layline example Ca-29

DN Parkrimp No-Skive Water cleaning 493 493 No-Skive Compact High water cleaning applications One wire No-Skive construction For water up to +120 C constant temperature Primary Applications High

40 DN Parkrimp No-Skive Water cleaning No-Skive Compact High water cleaning applications One wire No-Skive construction For water up to +120 C constant temperature Primary Applications High water cleaners Construction Tube: Synthetic rubber Reinforcement: One high-tensile steel wire braid Cover: Synthetic rubber in black or blue colour Temperature Range...water max C Fitting Series 48 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 493 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / BLU 6 1/ / BLU 8 5/ / BLU 10 3/ / BLU 12 1/ WKS rubber hand grip for No-Skive high water cleaning hoses can be found on page Eb-17. The combination of high temperature and high could reduce the hose life. Also available on reels under part number 493-xx-RL weight layline example PARKER NO-SKIVE WP 20,0 MPa (2898 PSI) I 8 mm (5/16) max. 120 C WATER Ca-30

DN Parkrimp No-Skive Extremely flexible 692 692 No-Skive Compact Constant, tight bend radius Primary Applications Material handling: General small bending radii hydraulic applications, ideal for over

41 DN Parkrimp No-Skive Extremely flexible No-Skive Compact Constant, tight bend radius Primary Applications Material handling: General small bending radii hydraulic applications, ideal for over the sheave or reel applications. Applicable Specifications Parker specification Construction Tube: Nitrile (NBR) Reinforcement: One or two high-tensile steel wire braids Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C No-Skive hose construction Compact design Nitrile (NBR) inner tube extended fluid compatibility Constant working of 21.0 MPa Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 46 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 692 <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / The combination of high temperature and high could reduce the hose life. weight layline example WP 21,0 MPa (3000 PSI) I 16 mm (5/8) Ca-31

DN Extremely flexible Parkrimp No-Skive 692Twin 692Twin No-Skive Compact Twin constant, tight bend radius Primary Applications Lifting and material handling equipment: General small bending radii

braids Cover: Synthetic rubber Temperature Range... -40 C up to +100 C Exception: Air... max.

42 DN Extremely flexible Parkrimp No-Skive 692Twin 692Twin No-Skive Compact Twin constant, tight bend radius Primary Applications Lifting and material handling equipment: General small bending radii hydraulic applications, ideal over the sheave or reel applications Applicable Specifications Parker specification Construction Tube: Nitrile (NBR) Reinforcement: One or two high-tensile steel wire braids Cover: Synthetic rubber Temperature Range C up to +100 C Exception: Air... max. +70 C No-Skive hose construction Compact design Nitrile (NBR) inner tube extended fluid compatibility Constant working of 21.0 MPa Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series 46 Pressure Rating I.D. O.D. max. working min. burst min. bend radius 692TWIN <tab> DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 Bend mm weight kg / / / / / The combination of high temperature and high could reduce the hose life. weight layline example WP 21,0 MPa (3000 PSI) I 12,5 mm (1/2) Ca-32

43 DN Parkrimp No-Skive Suction No-Skive Suction and Return Line SAE 100R4 Primary Applications All Markets: General applications No-Skive hose construction Helical wire to prevent collapse under vacuum Small bend radii Type Approvals Details please find on pages Ab-16 to Ab-19 Construction Tube: Synthetic rubber Reinforcement: Two fibre spiral, one helical wire Cover: Oil and weather resistant synthetic rubber Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Fitting Series Up to size For size -40 and -48 fittings series on request Pressure Rating I.D. O.D. max. working min. burst Vaccum* min. bend radius 811 <tab>_vac DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 VAC kpa Bend mm weight kg / / / / *1 = the vacuum values listed in the table are vacuum values in kpa. For an absolute value subtract the table value from 101 kpa. ** size -12 and size -16 = on Parkrimp 2 crimping press or adjustable crimpers only. The combination of high temperature and high could reduce the hose life. weight layline example PARKER SUCTION HOSE SAE 100R mm (3/4) 3Q81 PARKER SUCT Ca-33

size Suction Parkrimp No-Skive 811S 811S No-Skive Suction and Return Line Exceeds SAE 100R4 Primary Applications All Markets: General applications Type Approvals For size -64 and -80, details please

44 size Suction Parkrimp No-Skive 811S 811S No-Skive Suction and Return Line Exceeds SAE 100R4 Primary Applications All Markets: General applications Type Approvals For size -64 and -80, details please find on pages Ab-16 to Ab-19 Construction Tube: Synthetic rubber Reinforcement: Two fibre spiral, one helical wire Cover: Oil and weather resistant synthetic rubber No-Skive hose construction Helical wire to prevent collapse under vacuum Small bend radii Isobaric 1.0 MPa for all sizes Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Temperature Range C up to +100 C Exception: Air... max. +70 C Water... max. +85 C Fitting Series on request Pressure Rating I.D. O.D. max. working min. burst min. bend radius 811S <tab> Size mm mm OD ± 1.6 MPa1 psi1 MPa2 psi2 Bend mm 811S S S S S S S layline example 811S-40 SUCTION AND RETURN LINE HOSE - (MC25) - Exceed SAE 100R mm (2 1/2) Q/Y Ca-34

45 DN Parkrimp No-Skive Suction No-Skive Suction and Return Line SAE 100R4 Primary Applications All Markets: For high temperature applications For general applications No-Skive hose construction Helical wire to prevent collapse under vacuum Up to +121 C working temperature MSHA approved Type Approvals Details please find on pages Ab-16 to Ab-19 Construction Tube: Synthetic rubber Reinforcement: Two fibre spiral, one helical wire Cover: Synthetic rubber MSHA approved Temperature Range C up to +121 C Exception: Air... max. +70 C Water... max. +85 C Recommended Fluids Petroleum and water-glycol based fluids, lubricating oils, air and water. Consult the chemical compatibility section on pages Ab-24 to Ab-32 for more detailed information. Fitting Series Series 43 for sizes -12, -16 Series 48 for sizes -20 up to -32 For size -40 fittings series on request Pressure Rating I.D. O.D. max. working min. burst Vaccum* min. bend radius 881 <tab>_vac DN Inch Zoll Size size mm mm OD MPa1 psi1 MPa2 psi2 VAC kpa Bend mm weight kg / / / / * the vacuum values listed in the table are vacuum values in kpa. For an absolute value subtract the table value from 101kPa. The combination of high temperature and high could reduce the hose life. weight layline example PARKER SUCTION HOSE MSHA XXXX SAE 100R mm (3/4) 3Q78 PARKER Ca-35

46 Overview 43 Series DIN Metric Page Cb-1 Cb-4 CA CE CF D0 Cb-1 Cb-1 Cb-2 Cb-2 Female Metric 24 Light Series with O Ring Swivel Straight ISO SWS-L DKOL Female Metric 24 Light Series with O Ring Swivel 45 Elbow ISO SWE 45 -L DKOL 45 Female Metric 24 Light Series with O Ring Swivel 90 Elbow ISO SWE-L DKOL 90 C9 0C 1C D2 Cb-3 Cb-3 Cb-4 Cb-4 Female Metric 24 Swivel Heavy Series with O-Ring Straight ISO SWS-S DKOS Female Metric 24 Swivel Heavy Series with O Ring 45 Elbow ISO SWE 45 -S DKOS 45 Female Metric 24 Swivel Heavy Series with O Ring 90 Elbow ISO SWE-S DKOS 90 Male Metric 24 Light Series Rigid Straight ISO S-L CEL Male Metric 24 Rigid Heavy Series Straight ISO S-S CES BSP Page Cb-5 Cb-8 92 B1 B2 EA Cb-5 Cb-5 Cb-6 Cb-6 Female BSP Parallel Pipe Swivel Straight (60 Cone) BS5200-A DKR Female BSP Parallel Pipe Swivel 45 Elbow (60 Cone) BS 5200-D DKR 45 EB EC D9 Cb-7 Cb-7 Cb-8 BSP Swivel Female with O Ring 45 Elbow (60 Cone) BS 5200 ISO DKOR 45 BSP Swivel Female with O Ring 90 Elbow (60 Cone) BS 5200 ISO DKOR 90 Female BSP Parallel Pipe Swivel 90 Elbow (60 Cone) BS 5200-B DKR 90 Male BSP Parallel Pipe Rigid Straight (60 Cone) BS5200 AGR BSP Swivel Female with O Ring (60 Cone) BS 5200 ISO DKOR SAE Page Cb-9 Cb Cb-9 Cb-9 Cb-10 Cb-10 Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN 39/3W Cb-11 Male JIC 37 Rigid Straight ISO S AGJ Female JIC 37 Swivel Straight ISO SWS DKJ Female JIC 37 Swivel 45 Elbow ISO SWE 45 DKJ 45 Female JIC 37 SAE 45 Dual Flare Swivel Female 90 Elbow ISO SWES DKJ 90 Cb-Index

47 Overview 43 Series Flange Page Cb-12 Cb A Cb-12 Cb-12 Cb-13 Cb-13 ISO Flange Straight ISO S-L SFL (21.0 MPa/ 3000 psi) 6N Cb-14 ISO Flange 90 Elbow ISO E-S SFS 90 (42.0 MPa/ 6000 psi) ISO Flange 45 Elbow ISO E45 L SFL 45 (21.0 MPa/ 3000 psi) ISO Flange 90 Elbow ISO E L SFL 90 (21.0 MPa/ 3000 psi) ISO Flange Straight ISO S-S SFS (42.0 MPa/ 6000 psi) ORFS Page Cb-15 Cb-17 JC JS J7 J9 Cb-15 Cb-15 Cb-16 Cb-16 Female ORFS Swivel Straight Short ISO SWSA SAE J516 ORFS JM Cb-17 ORFS Swivel Female (Long) ISO SWSB SAE J516 ORFS Female ORFS Swivel 45 Elbow ISO SWE 45 SAE J516 ORFS 45 Female ORFS Swivel 90 Elbow Short Drop ISO SWES SAE J516 ORFS 90 ORFS Male ISO S SAE J Series Cb-Index

48 Notes

49 DN DN DIN Metric 43 Series CA Female Metric 24 Light Series with O Ring Swivel Straight ISO SWS-L DKOL DIN CA <tab>met_tube_abw DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1CA / M16x CA / M18x CA / M22x CA / M26x CA / M30x CA / M26x CA / M30x CA M36x CA M45x Tube I.D. Thread O.D. A B W fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. CE Female Metric 24 Light Series with O Ring Swivel 45 Elbow ISO SWE 45 -L DKOL Series DIN CE <tab>met_tube_abew DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1CE / M18x CE / M22x CE / M26x CE / M30x CE M36x Tube I.D. Thread O.D. A B E W fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb WC CLF 722TC 881 Cb-1

50 DN DN DIN Metric 43 Series CF Female Metric 24 Light Series with O Ring Swivel 90 Elbow ISO SWE-L DKOL 90 DIN CF <tab>met_tube_abew DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1CF / M18x CF / M22x CF / M26x CF / M30x CF M36x Tube I.D. Thread O.D. A B E W fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. D0 Male Metric 24 Light Series Rigid Straight ISO S-L CEL DIN D0 <tab>met_tube_abh DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm H 1D / M22x D M36x Tube I.D. Thread O.D. A B H WC CLF 722TC 881 Cb-2

51 DN DN DIN Metric C9 Female Metric 24 Swivel Heavy Series with O-Ring Straight ISO SWS-S DKOS 43 Series DIN C9 <tab>met_tube_abw DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1C / M18x C / M20x C / M22x C / M20x C / M24x C / M24x C / M30x C / M30x C / M36x C M36x C M42x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. Tube I.D. Thread O.D. A B W 0C Female Metric 24 Swivel Heavy Series with O Ring 45 Elbow ISO SWE 45 -S DKOS Series DIN 0C <tab>met_tube_abew DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 10C / M20x C / M22x C / M24x C / M30x C / M30x C / M36x C M36x C M42x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. Tube I.D. Thread O.D. A B E W WC CLF 722TC 881 Cb-3

52 DN DN DIN Metric 1C Female Metric 24 Swivel Heavy Series with O Ring 90 Elbow ISO SWE-S DKOS Series DIN 1C <tab>met_tube_abew DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 11C / M16x C / M20x C / M22x C / M24x C / M30x C / M36x C / M30x C / M36x C M36x C M42x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. Tube I.D. Thread O.D. A B E W D2 Male Metric 24 Rigid Heavy Series Straight ISO S-S CES DIN D2 <tab>met_tube_abh DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm H 1D / M20x D / M22x D / M24x D / M30x D / M30x D / M36x D M42x Tube I.D. Thread O.D. A B H WC CLF 722TC 881 Cb-4

DN DN BSP 43 Series 92 Female BSP Parallel Pipe Swivel Straight (60 Cone) BS5200-A DKR I.D. Thread A B W BSP 92 <tab>bsp_abw DN Inch Zoll Size size mm BSP mm A mm B mm W 19243-6-6 10 3/8-6 9.

9 5/8x14 57 21 30 19243-12-10 16 5/8-10 15.9 3/4x14 61 22 32 19243-12-12 19 3/4-12 19.1 3/4x14 61 22 32 19243-16-16 25 1-16 25.

53 DN DN BSP 43 Series 92 Female BSP Parallel Pipe Swivel Straight (60 Cone) BS5200-A DKR I.D. Thread A B W BSP 92 <tab>bsp_abw DN Inch Zoll Size size mm BSP mm A mm B mm W / /8x / /2x / /2x / /8x / /8x / /4x / /4x x B1 Female BSP Parallel Pipe Swivel 45 Elbow (60 Cone) BS 5200-D DKR Series I.D. Thread A B E W BSP B1 <tab>bsp_abew DN Inch Zoll Size size mm BSP mm A mm B mm E mm W 1B / /8x B / /2x B / /8x B / /4x B x WC CLF 722TC 881 Cb-5

54 DN DN BSP B2 Female BSP Parallel Pipe Swivel 90 Elbow (60 Cone) BS 5200-B DKR Series I.D. Thread A B E W BSP B2 <tab>bsp_abew DN Inch Zoll Size size mm BSP mm A mm B mm E mm W 1B / /8x B / /2x B / /2x B / /8x B / /4x B / /4x B x EA BSP Swivel Female with O Ring (60 Cone) BS 5200 ISO DKOR I.D. Thread A B W BSP EA <tab>bsp_abw DN Inch Zoll Size size mm BSP mm A mm B mm W 1EA / /2x EA / /8x EA / /4x EA x EA / /4x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb WC CLF 722TC 881 Cb-6

55 DN DN BSP EB BSP Swivel Female with O Ring 45 Elbow (60 Cone) BS 5200 ISO DKOR Series I.D. Thread A B E W BSP EB <tab>bsp_abew DN Inch Zoll Size size mm BSP mm A mm B mm E mm W 1EB / /4x EB / /8x EB / /2x EB / / EB / /4x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. EC BSP Swivel Female with O Ring 90 Elbow (60 Cone) BS 5200 ISO DKOR Series I.D. Thread A B E W BSP EC <tab>bsp_abew DN Inch Zoll Size size mm BSP mm A mm B mm E mm W 1EC / /4x EC / /8x EC / /8x EC / /2x EC / / EC / /4x EC x EC / /4x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb WC CLF 722TC 881 Cb-7

56 DN BSP D9 Male BSP Parallel Pipe Rigid Straight (60 Cone) BS5200 AGR 43 Series I.D. Thread A B H BSP D9 <tab>bsp_abh DN Inch Zoll Size size mm BSP mm A mm B mm H 1D / /8x D / /4x D / /8x D / /2x D / /2x D / /8x D / /4x D / /4x D / x D x WC CLF 722TC 881 Cb-8

57 DN DN SAE 43 Series 01 Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN I.D. Thread A B H SAE 01 <tab>nptf_abh DN Inch Zoll Size size mm NPTF mm A mm B mm H SM 10 3/ /8x SM 10 3/ /2x SM 19 3/ /4x Male JIC 37 Rigid Straight ISO S AGJ 43 Series I.D. Thread A B H SAE 03 <tab>unf_abh DN Inch Zoll Size size mm UNF mm A mm B mm H SM 10 3/ /16x SM 10 3/ /4x SM 12 1/ /8x SM 12 1/ /16x SM 16 5/ /16x SM /16x WC CLF 722TC 881 Cb-9

DN DN SAE 43 Series 06 Female JIC 37 Swivel Straight ISO12151-5-SWS DKJ I.D. Thread A B H W SAE 06 <tab>unf_abhw_inch DN Inch Zoll Size size mm UNF mm A mm B mm HInch mm WInch 10643-6-6-SM 10 3/8-6 9.

9 7/8x14 73 38 15/16 1 10643-12-10-SM 16 5/8-10 15.9 1 1/16x12 78 41 27 32 10643-12-12-SM 19 3/4-12 19.1 1 1/16x12 80 41 27 32 10643-14-12-SM 19 3/4-12 19.

58 DN DN SAE 43 Series 06 Female JIC 37 Swivel Straight ISO SWS DKJ I.D. Thread A B H W SAE 06 <tab>unf_abhw_inch DN Inch Zoll Size size mm UNF mm A mm B mm HInch mm WInch SM 10 3/ /16x SM 10 3/ /4x * 12 1/ /4x /16 7/ SM 12 1/ /8x * 16 5/ /8x / SM 16 5/ /16x SM 19 3/ /16x SM 19 3/ /16x SM 19 3/ /16x SM /16x SM /16x * These fittings contain a dual seat that accepts both JIC (37 ) and SAE (45 ) male configurations. 37 Female JIC 37 Swivel 45 Elbow ISO SWE 45 DKJ 45 I.D. Thread A B E W SAE 37 <tab>unf_abew DN Inch Zoll Size size mm UNF mm A mm B mm E mm W SM 10 3/ /16x SM* 12 1/ /4x SM* 16 5/ /8x SM 16 5/ /16x SM 19 3/ /16x SM 19 3/ /16x SM /16x * These fittings contain a dual seat that accepts both JIC (37 ) and SAE (45 ) male configurations WC CLF 722TC 881 Cb-10

DN SAE 39/3W Female JIC 37 SAE 45 Dual Flare Swivel Female 90 Elbow ISO 12151-5-SWES DKJ 90 43 Series I.D. Thread A B E W

5 9/16x18 57 28 23 19 13W43-8-6-SM 10 3/8-6 9.5 3/4x16 64 35 29 22 13943-10-8-SM* 12 1/2-8 12.

9 7/8x14 80 40 33 27 13943-12-12-SM 19 3/4-12 19.1 1 1/16x12 89 50 48 32 13943-16-12-SM 19 3/4-12 19.

59 DN SAE 39/3W Female JIC 37 SAE 45 Dual Flare Swivel Female 90 Elbow ISO SWES DKJ Series I.D. Thread A B E W SAE 39/3W <tab>unf_abew_inch DN Inch Zoll Size size mm UNF mm A mm B mm E mm W Inch SM 10 3/ /16x W SM 10 3/ /4x SM* 12 1/ /8x * 16 5/ /8x W SM* 16 5/ /8x SM 19 3/ /16x SM 19 3/ /16x SM /16x * These fittings contain a dual seat that accepts both JIC (37 ) and SAE (45 ) male configurations. 43 Series WC CLF 722TC 881 Cb-11

60 DN DN Flange 43 Series 15 ISO Flange Straight ISO S-L SFL (21.0 MPa/ 3000 psi) I.D. Flange A B F Flang 15 <tab>flange_abf DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm F / / / / / / / / To select corresponding half-flange and O-ring see section Eb. 17 ISO Flange 45 Elbow ISO E45 L SFL 45 (21.0 MPa/ 3000 psi) I.D. Flange A B E F Flang 17 <tab>flange_abef DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm E mm F / / / / / / / To select corresponding half-flange and O-ring see section Eb WC CLF 722TC 881 Cb-12

DN DN Flange 43 Series 19 ISO 6162-1 Flange 90 Elbow ISO 12151-3 E L SFL 90 (21.0 MPa/ 3000 psi) I.D. Flange A B E F Flang 19 <tab>flange_abef DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm E mm F 11943-8-8 12 1/2-8 12.

61 DN DN Flange 43 Series 19 ISO Flange 90 Elbow ISO E L SFL 90 (21.0 MPa/ 3000 psi) I.D. Flange A B E F Flang 19 <tab>flange_abef DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm E mm F / / / / / To select corresponding half-flange and O-ring see section Eb. 6A ISO Flange Straight ISO S-S SFS (42.0 MPa/ 6000 psi) 43 Series I.D. Flange A B F Flang 6A <tab>flange_abf DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm F 16A / / A To select corresponding half-flange and O-ring see section Eb WC CLF 722TC 881 Cb-13

DN Flange 6N ISO 6162-2 Flange 90 Elbow ISO 12151-3 E-S SFS 90 (42.0 MPa/ 6000 psi) 43 Series I.

mm F 16N43-12-12 19 3/4-12 19.1 3/4 98 58 54 41 16N43-16-16 25 1-16 25.

62 DN Flange 6N ISO Flange 90 Elbow ISO E-S SFS 90 (42.0 MPa/ 6000 psi) 43 Series I.D. Flange A B E F Flang 6N <tab>flange_abef DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm E mm F 16N / / N To select corresponding half-flange and O-ring see section Eb WC CLF 722TC 881 Cb-14

DN DN ORFS JC Female ORFS Swivel Straight Short ISO 12151-1 SWSA SAE J516 ORFS 43 Series I.D. Thread A B H W ORFS JC <tab>unf_abhw DN Inch Zoll Size size mm UNF mm A mm B mm H mm W 1JC43-6-6-SM 10 3/8-6 9.

1 1 3/16x12 68 29 32 36 1JC43-16-12-SM 19 3/4-12 19.1 1 7/16x12 72 33 36 41 1JC43-16-16-SM 25 1-16 25.4 1 7/16x12 80 35 36 41 JS ORFS Swivel Female (Long) ISO 12151-1-SWSB SAE J516 ORFS 43 Series I.

63 DN DN ORFS JC Female ORFS Swivel Straight Short ISO SWSA SAE J516 ORFS 43 Series I.D. Thread A B H W ORFS JC <tab>unf_abhw DN Inch Zoll Size size mm UNF mm A mm B mm H mm W 1JC SM 10 3/ /16x JC SM 12 1/ /16x JC SM 12 1/ x JC SM 16 5/ x JC SM 19 3/ /16x JC SM 19 3/ /16x JC SM /16x JS ORFS Swivel Female (Long) ISO SWSB SAE J516 ORFS 43 Series I.D. Thread A B H W ORFS JS <tab>unf_abhw_inch DN Inch Zoll Size size mm UNF mm A mm B mm HInch mm WInch 1JS SM 16 5/ x / WC CLF 722TC 881 Cb-15

64 DN DN ORFS J7 Female ORFS Swivel 45 Elbow ISO SWE 45 SAE J516 ORFS Series I.D. Thread A B E W ORFS J7 <tab>unf_abew DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 1J SM 10 3/ /16x J SM 12 1/ /16x J SM 16 5/ x J SM 19 3/ /16x J SM /16x J9 Female ORFS Swivel 90 Elbow Short Drop ISO SWES SAE J516 ORFS 90 I.D. Thread A B E W ORFS J9 <tab>unf_abew DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 1J SM 10 3/ /16x J SM 10 3/ /16x J SM 12 1/ /16x J SM 12 1/ x J SM 16 5/ x J SM 16 5/ /16x J SM 19 3/ /16x J SM /16x WC CLF 722TC 881 Cb-16

65 DN ORFS JM ORFS Male ISO S SAE J Series I.D. Thread A B H ORFS JM <tab>unf_abh DN Inch Zoll Size size mm UNF mm A mm B mm H 1JM SM 10 3/ /16x JM SM 12 1/ /16x JM SM 12 1/ x JM SM 16 5/ x JM SM /16x To select corresponding O-ring see section Eb. 43 Series WC CLF 722TC 881 Cb-17

Overview DIN Metric Page Cc-1 Cc-11 CA CE CF D0 Cc-1 Cc-2 Cc-3 Cc-4 Female Metric 24 Light Series with O Ring Swivel Straight ISO 12151-2-SWS-L DKOL Female Metric 24 Light Series with O Ring Swivel

(Ball Nose for 24 or 60 Cone) DKL Female Metric Light Series Swivel 45 Elbow (Ball Nose for 24 or 60 Cone) DKL 45 Female Metric Light Series Swivel 90 Elbow (Ball Nose for 24 or 60 Cone) DKL 90 0C 1C

Ring 90 Elbow ISO 12151-2-SWE-S DKOS 90 Male Metric 24 Rigid Heavy Series Straight ISO 12151-2-S-S CES Male Metric 24 Light Series Rigid Straight ISO 12151-2-S-L CEL Female Metric 24 Swivel Heavy

Straight (60 Cone) BS5200-A DKR Female BSP Parallel Pipe Swivel 45 Elbow (60 Cone) BS 5200-D DKR 45 Female BSP Parallel Pipe Swivel 90 Elbow (60 Cone) BS 5200-B DKR 90 EA EB EC D9 Cc-16 Cc-17 Cc-18

66 Overview DIN Metric Page Cc-1 Cc-11 CA CE CF D0 Cc-1 Cc-2 Cc-3 Cc-4 Female Metric 24 Light Series with O Ring Swivel Straight ISO SWS-L DKOL Female Metric 24 Light Series with O Ring Swivel 45 Elbow ISO SWE 45 -L DKOL 45 Female Metric 24 Light Series with O Ring Swivel 90 Elbow ISO SWE-L DKOL 90 C3 C4 C5 C9 Cc-5 Cc-5 Cc-6 Cc-7 Female Metric Light Series Swivel Straight (Ball Nose for 24 or 60 Cone) DKL Female Metric Light Series Swivel 45 Elbow (Ball Nose for 24 or 60 Cone) DKL 45 Female Metric Light Series Swivel 90 Elbow (Ball Nose for 24 or 60 Cone) DKL 90 0C 1C D2 C6 Cc-8 Cc-9 Cc-10 Cc-11 Female Metric 24 Swivel Heavy Series with O Ring 45 Elbow ISO SWE 45 -S DKOS Cc-11 Metric Banjo Straight DIN 7642 Female Metric 24 Swivel Heavy Series with O Ring 90 Elbow ISO SWE-S DKOS 90 Male Metric 24 Rigid Heavy Series Straight ISO S-S CES Male Metric 24 Light Series Rigid Straight ISO S-L CEL Female Metric 24 Swivel Heavy Series with O-Ring Straight ISO SWS-S DKOS Female Metric Swivel Heavy Series Straight (Ball Nose) DKS BSP Page Cc-12 Cc B1 B2 B4 Cc-12 Cc-13 Cc-14 Cc-15 Female BSP Parallel Pipe Swivel Straight (60 Cone) BS5200-A DKR Female BSP Parallel Pipe Swivel 45 Elbow (60 Cone) BS 5200-D DKR 45 Female BSP Parallel Pipe Swivel 90 Elbow (60 Cone) BS 5200-B DKR 90 EA EB EC D9 Cc-16 Cc-17 Cc-18 Cc-19 BSP Swivel Female with O Ring (60 Cone) BS 5200 ISO DKOR 91 Cc-20 BSP Swivel Female with O Ring 45 Elbow (60 Cone) BS 5200 ISO DKOR 45 B5 Cc-20 BSP Swivel Female with O Ring 90 Elbow (60 Cone) BS 5200 ISO DKOR 90 Female BSP Parallel Pipe Swivel 90 Elbow Block Type (60 Cone) BS 5200-E DKR 90 Male BSP Parallel Pipe Rigid Straight (60 Cone) BS5200 AGR Male BSP Taper Pipe Rigid Straight BS5200 AGR-K Female BSP Parallel Pipe Swivel Straight (Flat Seat) Cc-Index

Overview SAE 01 Cc-21 Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN 08 Cc-25 Female SAE 45 Swivel Straight SAE J516 03 Cc-22 Male JIC 37 Rigid Straight ISO12151-5-S AGJ 37/3V Cc-26 Female JIC 37

Dual Flare Swivel Female 90 Elbow ISO 12151-5-SWES DKJ 90 06/68 Cc-24 Female JIC 37 SAE 45 Dual Flare Swivel Straight ISO12151-5-SWS DKJ 41/3Y Cc-28 Female JIC 37 / 45 Swivel Female 90 Elbow (Long)

0 MPa/ 3000 psi) 6F Cc-32 ISO 6162-2 Flange 45 Elbow Heavy Series ISO 12151-3 E45-S SFS 45 (42.0 MPa/ 6000 psi) ORFS ISO 6162-1 Flange 45 Elbow ISO 12151-3 E45 L SFL 45 (21.

0 MPa/ 3000 psi) Page Cc-34 Cc-39 JC JS J7 J9 Cc-34 Cc-35 Cc-36 Cc-37 Female ORFS Swivel Straight Short ISO 12151-1 SWSA SAE J516 ORFS ORFS Swivel Female (Long) ISO 12151-1-SWSB SAE J516 ORFS Female

67 Overview SAE 01 Cc-21 Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN 08 Cc-25 Female SAE 45 Swivel Straight SAE J Cc-22 Male JIC 37 Rigid Straight ISO S AGJ 37/3V Cc-26 Female JIC 37 SAE 45 Dual Flare Swivel Female 45 Elbow ISO SWE 45 DKJ 45 Page Cc-21 Cc Cc-23 Male SAE Straight Thread with O Ring Rigid Straight ISO SAE J516 39/3W Cc-27 Female JIC 37 SAE 45 Dual Flare Swivel Female 90 Elbow ISO SWES DKJ 90 06/68 Cc-24 Female JIC 37 SAE 45 Dual Flare Swivel Straight ISO SWS DKJ 41/3Y Cc-28 Female JIC 37 / 45 Swivel Female 90 Elbow (Long) ISO SWEL DKJ 90 L Flange Page Cc-29 Cc A Cc-29 Cc-30 Cc-31 Cc-32 ISO Flange Straight ISO S-L SFL (21.0 MPa/ 3000 psi) 6F Cc-32 ISO Flange 45 Elbow Heavy Series ISO E45-S SFS 45 (42.0 MPa/ 6000 psi) ORFS ISO Flange 45 Elbow ISO E45 L SFL 45 (21.0 MPa/ 3000 psi) 6N Cc-33 ISO Flange 90 Elbow ISO E-S SFS 90 (42.0 MPa/ 6000 psi) ISO Flange 90 Elbow ISO E L SFL 90 (21.0 MPa/ 3000 psi) Page Cc-34 Cc-39 JC JS J7 J9 Cc-34 Cc-35 Cc-36 Cc-37 Female ORFS Swivel Straight Short ISO SWSA SAE J516 ORFS ORFS Swivel Female (Long) ISO SWSB SAE J516 ORFS Female ORFS Swivel 45 Elbow ISO SWE 45 SAE J516 ORFS 45 J1 J5 JM JD Cc-38 Cc-38 Cc-39 Cc-39 Female ORFS Swivel 90 Elbow Long Drop ISO SWEL SAE J 516 ORFS 90 L Female ORFS Swivel 90 Elbow Medium Drop ISO SWEM ORFS 90 M ORFS Male ISO S SAE J516 ISO Flange Straight ISO S-S SFS (42.0 MPa/ 6000 psi) Female ORFS Swivel 90 Elbow Short Drop ISO SWES SAE J516 ORFS 90 Male ORFS Bulkhead with Locknut Straight (with O ring) ISO SAE J516 Cc-Index

Overview JIS Page Cc-40 Cc-41 FU GU MU MZ Cc-40 Cc-40 Cc-41 Cc-41 Female BSP Parallel Pipe Swivel Straight (30 Flare) ISO

Straight (30 Flare) JIS B8363 MU Female Metric Swivel 90 Elbow (30 Flare) JIS B8363 French Standard Page Cc-42 Cc-44 FG

90 Elbow FA Cc-44 Female French Gas Series Swivel Straight (Ball Nose) French Male Metric Series (24 Cone) French Female

Cc-45 Cc-45 Cc-46 Power Cleaner Connection Female Kärcher Metric Cleaning Fitting Swivel Straight Male Kärcher Metric

Flare) JIS B8363 Male Metric L Rigid Bulkhead with Locknut (24 Cone) Female Metric Swivel (M27x2) O Ring Light Series

68 Overview JIS Page Cc-40 Cc-41 FU GU MU MZ Cc-40 Cc-40 Cc-41 Cc-41 Female BSP Parallel Pipe Swivel Straight (30 Flare) ISO JIS B8363 GUI Female BSP Parallel Pipe Swivel Straight (60 Cone) ISO JIS B8363 GUO Female Metric Swivel Straight (30 Flare) JIS B8363 MU Female Metric Swivel 90 Elbow (30 Flare) JIS B8363 French Standard Page Cc-42 Cc-44 FG F2 F4 F6 Cc-42 Cc-42 Cc-43 Cc-43 Male French Gas Series Rigid Straight (24 Cone) F9 Cc-44 Female French Gas Series Swivel 90 Elbow FA Cc-44 Female French Gas Series Swivel Straight (Ball Nose) French Male Metric Series (24 Cone) French Female Metric Series Swivel (Ball Nose) Metric Male for Agriculture Valves High Pressure Cleaning Page Cc-45 Cc-46 CW NW PW Cc-45 Cc-45 Cc-46 Power Cleaner Connection Female Kärcher Metric Cleaning Fitting Swivel Straight Male Kärcher Metric Cleaning Fitting Rigid Straight Others Page Cc-47 Cc-48 XU DK DX Cc-47 Cc-47 Cc-48 Female Metric Swivel Straight (30 Flare) JIS B8363 Male Metric L Rigid Bulkhead with Locknut (24 Cone) Female Metric Swivel (M27x2) O Ring Light Series UPTC (Universal push-to-connect) Page Cc-49 Cc-50 EN EU ET Cc-49 Cc-49 Cc-50 UPTC Male Straight UPTC Male 45 Elbow UPTC Male 90 Elbow Cc-Index

Part2 DIN Metric CA Female Metric 24 Light Series with O Ring Swivel Straight ISO 12151-2-SWS-L DKOL Tube I.D. Thread O.D. A B W DIN 46 CA series <tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1CA46-6-4 1CA48-6-4 6 1/4-4 6.

5 12 46 22 22 1CA46-8-5 1CA48-8-5 8 5/16-5 7.9 M14x1.5 8 50 26 17 1CA46-10-5 1CA48-10-5 8 5/16-5 7.9 M16x1.5 10 46 22 19 1CA46-12-5 1CA48-12-5 8 5/16-5 7.9 M18x1.

69 Part2 DIN Metric CA Female Metric 24 Light Series with O Ring Swivel Straight ISO SWS-L DKOL Tube I.D. Thread O.D. A B W DIN 46 CA series <tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1CA CA / M12x CA CA / M14x CA CA / M16x CA CA / M18x CA CA / M14x CA CA / M16x CA CA / M18x CA CA / M14x CA CA / M16x CA CA / M18x CA CA / M22x CA CA / M26x CA CA / M18x CA CA / M22x CA CA / M26x CA CA / M22x CA CA / M26x CA CA / M30x CA CA / M26x CA CA / M30x CA CA / M36x CA CA M30x CA CA M36x CA CA M45x CA / M36x CA / M45x CA / M45x CA / M52x CA / M45x CA / M52x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-1

70 Part2 DIN Metric CE Female Metric 24 Light Series with O Ring Swivel 45 Elbow ISO SWE 45 -L DKOL 45 Tube I.D. Thread O.D. A B E W DIN 46 CE series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1CE CE / M12x CE CE / M14x CE CE / M16x CE CE / M18x CE CE / M14x CE CE / M16x CE CE / M18x CE CE / M16x CE CE / M18x CE CE / M22x CE CE / M18x CE CE / M22x CE CE / M26x CE CE / M22x CE CE / M26x CE CE / M26x CE CE / M30x CE CE / M36x CE CE M30x CE M36x CE M36x CE / M36x CE / M45x CE / M45x CE / M52x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-2

Part2 DIN Metric CF Female Metric 24 Light Series with O Ring Swivel 90 Elbow ISO 12151-2-SWE-L DKOL 90 Tube I.D. Thread O.D. A B E W DIN 46 CF series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1CF46-6-4 1CF48-6-4 6 1/4-4 6.

5 12 53 26 29 22 1CF46-8-5 1CF48-8-5 8 5/16-5 7.9 M14x1.5 8 62 38 34 17 1CF46-10-5 1CF48-10-5 8 5/16-5 7.9 M16x1.5 10 61 37 29 19 1CF46-12-5 1CF48-12-5 8 5/16-5 7.9 M18x1.

71 Part2 DIN Metric CF Female Metric 24 Light Series with O Ring Swivel 90 Elbow ISO SWE-L DKOL 90 Tube I.D. Thread O.D. A B E W DIN 46 CF series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1CF CF / M12x CF CF / M14x CF CF / M16x CF CF / M18x CF CF / M14x CF CF / M16x CF CF / M18x CF CF / M16x CF CF / M18x CF CF / M22x CF CF / M18x CF CF / M22x CF CF / M26x CF CF / M22x CF CF / M26x CF CF / M30x CF CF / M26x CF CF / M30x CF CF / M36x CF CF M30x CF CF M36x CF / M30x CF / M36x CF / M36x CF / M45x CF / M45x CF / M45x CF / M52x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-3

Part2 DIN Metric D0 Male Metric 24 Light Series Rigid Straight ISO 12151-2-S-L CEL Tube I.D. Thread O.D. A B H DIN 46 D0 series <tab>met_tube_abh 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm H 1D046-6-4 1D048-6-4 6 1/4-4 6.

72 Part2 DIN Metric D0 Male Metric 24 Light Series Rigid Straight ISO S-L CEL Tube I.D. Thread O.D. A B H DIN 46 D0 series <tab>met_tube_abh 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm H 1D D / M12x D D / M14x D D / M16x D D / M18x D D / M14x D / M16x D / M16x D D / M18x D D / M16x D D / M18x D D / M22x D / M18x D D / M22x D D / M26x D D / M22x D D / M26x D D / M26x D D / M30x D D / M36x D D M36x D / M45x D / M45x D / M52x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-4

Part2 Part2 DIN Metric C3 Female Metric Light Series Swivel Straight (Ball Nose for 24 or 60 Cone) DKL Tube I.D. Thread O.D. A B W DIN 46 C3 series <tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1C348-6-4 6 1/4-4 6.

73 Part2 Part2 DIN Metric C3 Female Metric Light Series Swivel Straight (Ball Nose for 24 or 60 Cone) DKL Tube I.D. Thread O.D. A B W DIN 46 C3 series <tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1C / M12x C / M14x C / M16x C / M16x C / M18x C / M16x C / M18x C / M22x C / M26x C / M30x C M36x C4 Female Metric Light Series Swivel 45 Elbow (Ball Nose for 24 or 60 Cone) DKL 45 Tube I.D. Thread O.D. A B E W DIN 46 C4 series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1C / M14x C / M16x C / M18x C / M22x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-5

Part2 DIN Metric C5 Female Metric Light Series Swivel 90 Elbow (Ball Nose for 24 or 60 Cone) DKL 90 Tube I.D. Thread O.D. A B E W DIN 46 C5 series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1C548-6-4 6 1/4-4 6.

74 Part2 DIN Metric C5 Female Metric Light Series Swivel 90 Elbow (Ball Nose for 24 or 60 Cone) DKL 90 Tube I.D. Thread O.D. A B E W DIN 46 C5 series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1C / M12x C / M14x C / M16x C / M16x C / M18x C / M22x C / M26x C / M30x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-6

Part2 DIN Metric C9 Female Metric 24 Swivel Heavy Series with O-Ring Straight ISO 12151-2-SWS-S DKOS Tube I.D. Thread O.D. A B W DIN 46 C9 series <tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1C948-6-4 6 1/4-4 6.

75 Part2 DIN Metric C9 Female Metric 24 Swivel Heavy Series with O-Ring Straight ISO SWS-S DKOS Tube I.D. Thread O.D. A B W DIN 46 C9 series <tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1C / M14x C / M14x C C / M16x C C / M18x C C / M20x C C / M22x C C / M16x C C / M18x C C / M20x C C / M22x C C / M24x C C / M16x C C / M18x C C / M20x C C / M22x C C / M24x C C / M20x C C / M22x C C / M24x C C / M30x C C / M24x C C / M30x C / M20x C / M24x C C / M30x C C / M36x C C M36x C C M42x C / M36x C / M52x C / M52x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-7

76 Part2 DIN Metric 0C Female Metric 24 Swivel Heavy Series with O Ring 45 Elbow ISO SWE 45 -S DKOS 45 Tube I.D. Thread O.D. A B E W DIN 46 0C series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 10C C / M14x C C / M16x C C / M18x C C / M20x C C / M18x C C / M20x C C / M18x C C / M20x C C / M22x C C / M22x C C / M24x C C / M24x C C / M30x C C / M30x C C / M36x C / M42x C M36x C M36x C C M42x C / M52x C / M52x C / M52x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-8

Part2 DIN Metric 1C Female Metric 24 Swivel Heavy Series with O Ring 90 Elbow ISO 12151-2-SWE-S DKOS 90 Tube I.D. Thread O.D. A B E W DIN 46 1C series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 11C46-6-4 11C48-6-4 6 1/4-4 6.

77 Part2 DIN Metric 1C Female Metric 24 Swivel Heavy Series with O Ring 90 Elbow ISO SWE-S DKOS 90 Tube I.D. Thread O.D. A B E W DIN 46 1C series <tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 11C C / M14x C C / M16x C C / M18x C C / M20x C C / M18x C C / M20x C C / M18x C C / M20x C C / M22x C / M24x C / M20x C C / M22x C C / M24x C C / M30x C C / M24x C C / M30x C C / M36x C C / M30x C C / M36x C / M42x C C M36x C C M42x C M52x C M52x C / M42x C / M52x C / M52x C / M52x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-9

78 Part2 DIN Metric D2 Male Metric 24 Rigid Heavy Series Straight ISO S-S CES Tube I.D. Thread O.D. A B H DIN 46 D2 series <tab>met_tube_abh 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm H 1D D / M14x D D / M16x D D / M18x D D / M20x D D / M16x D D / M18x D D / M20x D D / M22x D / M24x D D / M18x D D / M20x D D / M22x D D / M20x D / M22x D D / M24x D / M30x D D / M24x D D / M30x D / M24x D D / M30x D D / M36x D D M36x D D M42x D / M52x D / M52x D / M52x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-10

Part2 Part2 DIN Metric C6 Female Metric Swivel Heavy Series Straight (Ball Nose) DKS Tube I.D. Thread O.D. A B H DIN 46 C6 series <tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1C648-8-4 6 1/4-4 6.

N 7642 I.D. A B D DIN 46 49 series <tab>abd 48 series DN Inch Zoll Size size mm mm A mm B mm D 14946-10-4 14948-10-4 6 1/4-4 6.4 47 24 10 14946-12-4 14948-12-4 6 1/4-4 6.

9 53 30 16 14946-16-6 14948-16-6 10 3/8-6 9.5 53 30 16 14946-17-6 14948-17-6 10 3/8-6 9.5 53 30 17 14946-18-6 14948-18-6 10 3/8-6 9.5 55 32 18 14946-22-6 14948-22-6 10 3/8-6 9.

79 Part2 Part2 DIN Metric C6 Female Metric Swivel Heavy Series Straight (Ball Nose) DKS Tube I.D. Thread O.D. A B H DIN 46 C6 series <tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1C / M16x C / M20x C / M22x C / M24x Metric Banjo Straight DIN 7642 I.D. A B D DIN series <tab>abd 48 series DN Inch Zoll Size size mm mm A mm B mm D / / / / / / / / / / / / / / / To select corresponding screw and seals see section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-11

80 Part2 BSP 92 Female BSP Parallel Pipe Swivel Straight (60 Cone) BS5200-A DKR I.D. Thread A B W BSP series <tab>bsp_abw 48 series DN Inch Zoll Size size mm BSP mm A mm B mm W / /8x / /4x / /4x / /8x / /2x / /4x / /8x / /4x / /8x / /2x / /8x / /2x / /8x / /4x / /2x / /8x / /4x / /2x / /8x / /4x / x x /4x /4x / /4x / /4x / /2x x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-12

81 Part2 BSP B1 Female BSP Parallel Pipe Swivel 45 Elbow (60 Cone) BS 5200-D DKR 45 I.D. Thread A B E W BSP 46 B1 series <tab>bsp_abew 48 series DN Inch Zoll Size size mm BSP mm A mm B mm E mm W 1B / /4x B / /4x B B / /8x B B / /8x B B / /8x B B / /2x B B / /8x B B / /2x B B / /8x B B / /8x B B / /4x B B / /4x B B / x B B x B / /4x B / /4x B / /2x B x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-13

82 Part2 BSP B2 Female BSP Parallel Pipe Swivel 90 Elbow (60 Cone) BS 5200-B DKR 90 I.D. Thread A B E W BSP 46 B2 series <tab>bsp_abew 48 series DN Inch Zoll Size size mm BSP mm A mm B mm E mm W 1B B / /8x B B / /4x B / /8x B / /8x B B / /2x B B / /8x B B / /8x B B / /2x B B / /8x B B / /2x B B / /8x B B / /8x B B / /4x B B / /4x B B / x B B x B / /4x B / /4x B / /2x B x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-14

Part2 BSP B4 Female BSP Parallel Pipe Swivel 90 Elbow Block Type (60 Cone) BS 5200-E DK

Thread A B E H W BSP 46 B4 series <tab>bsp_abehw 48 series DN Inch Zoll Size size mm BSP mm A mm B mm E mm H mm W 1B446-4-4 1B448-4-4 6 1/4-4 6.

5 3/8x19 68 45 23 19 22 1B446-8-6 1B448-8-6 10 3/8-6 9.5 1/2x14 67 44 27 22 27 1B446-8-8 1B448-8-8 12 1/2-8 12.

83 Part2 BSP B4 Female BSP Parallel Pipe Swivel 90 Elbow Block Type (60 Cone) BS 5200-E DKR 90 I.D. Thread A B E H W BSP 46 B4 series <tab>bsp_abehw 48 series DN Inch Zoll Size size mm BSP mm A mm B mm E mm H mm W 1B B / /4x B B / /8x B B / /8x B B / /2x B B / /2x B B / /8x B B / /4x B B x Short version available upon request (swaging on universal crimpers only) 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-15

84 Part2 BSP EA BSP Swivel Female with O Ring (60 Cone) BS 5200 ISO DKOR I.D. Thread A B W BSP 46 EA series <tab>bsp_abw 48 series DN Inch Zoll Size size mm BSP mm A mm B mm W 1EA EA / /4x EA EA / /8x EA / /8x EA / /4x EA EA / /8x EA EA / /2x EA / /8x EA EA / /2x EA / /8x EA EA / /8x EA EA / /4x EA EA / /4x EA EA / x EA EA x EA / /4x EA / /2x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-16

Part2 BSP EB BSP Swivel Female with O Ring 45 Elbow (60 Cone) BS 5200 ISO 12151-6 DK

85 Part2 BSP EB BSP Swivel Female with O Ring 45 Elbow (60 Cone) BS 5200 ISO DKOR 45 I.D. Thread A B E W BSP 46 EB series <tab>bsp_abew 48 series DN Inch Zoll Size size mm BSP mm A mm B mm E mm W 1EB EB / /4x EB EB / /8x EB EB / /2x EB EB / /4x EB EB / /4x EB EB x EB / /4x EB / /2x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-17

Part2 BSP EC BSP Swivel Female with O Ring 90 Elbow (60 Cone) BS 5200 ISO 12151-6 DK

4 3/8x19 51 28 27 22 1EC46-6-6 1EC48-6-6 10 3/8-6 9.5 3/8x19 60 38 33 22 1EC46-8-6 1EC48-8-6 10 3/8-6 9.5 1/2x14 60 38 36 27 1EC48-6-8 12 1/2-8 12.7 3/8x19 63 39 41 22 1EC46-8-8 1EC48-8-8 12 1/2-8 12.

86 Part2 BSP EC BSP Swivel Female with O Ring 90 Elbow (60 Cone) BS 5200 ISO DKOR 90 I.D. Thread A B E W BSP 46 EC series <tab>bsp_abew 48 series DN Inch Zoll Size size mm BSP mm A mm B mm E mm W 1EC EC / /4x EC EC / /8x EC EC / /8x EC EC / /2x EC / /8x EC EC / /2x EC EC / /8x EC EC / /8x EC / /4x EC / /8x EC EC / /4x EC EC / x EC EC x EC / /4x EC / /2x EC x fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -40 C up to +105 C. fittings with special O-rings (Viton or EPDM) available on request. O-ring dimensions and part-numbers see in section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-18

87 Part2 BSP D9 Male BSP Parallel Pipe Rigid Straight (60 Cone) BS5200 AGR I.D. Thread A B H BSP 46 D9 series <tab>bsp_abh 48 series DN Inch Zoll Size size mm BSP mm A mm B mm H 1D D / /8x D D / /4x D D / /8x D D / /2x D / /4x D / /4x D D / /8x D / /4x D / /4x D D / /8x D D / /2x D D / /8x D D / /2x D D / /8x D D / /4x D D / /2x D D / /8x D D / /4x D D / /4x D D / x D D x D D /4x D / /4x D / /4x D / /2x D x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-19

Part2 Part2 BSP 91 Male BSP Taper Pipe Rigid Straight BS5200 AGR-K I.D. Thread A B H BSP 46 91 series <tab>bsp_abh 48 series DN Inch Zoll Size size mm BSP mm A mm B mm H 19146-4-4 19148-4-4 6 1/4-4 6.

88 Part2 Part2 BSP 91 Male BSP Taper Pipe Rigid Straight BS5200 AGR-K I.D. Thread A B H BSP series <tab>bsp_abh 48 series DN Inch Zoll Size size mm BSP mm A mm B mm H / /4x / /8x / /4x / /8x / /4x / /8x / /2x / /8x / /2x / /4x / /4x x B5 Female BSP Parallel Pipe Swivel Straight (Flat Seat) I.D. Thread A B W BSP 46 B5 series <tab>bsp_abw 48 series DN Inch Zoll Size size mm BSP mm A mm B mm W 1B B / /4x B B / /4x B B / /8x B B / /2x B B / /8x B B / /2x B B / /2x B B / /4x B B / /4x B B / /4x B B x or RH 461LT ST ST TWIN 301SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-20

89 Part2 SAE 01 Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN I.D. Thread A B H SAE series <tab>nptf_abh 48 series DN Inch Zoll Size size mm NPTF UNF mm A mm B mm H / /8x / /4x / /8x / /4x / /8x / /4x / /8x / /2x / /8x / /2x / /2x / /4x / /4x x11 1/ x11 1/ / /4x11 1/ / /4x11 1/ / /2x11 1/ x11 1/ or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-21

90 Part2 SAE 03 Male JIC 37 Rigid Straight ISO S AGJ I.D. Thread A B H SAE series <tab>unf_abh 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H / /16x / /2x / /16x / /2x / /16x / /4x / /16x / /2x / /16x / /4x / /8x / /4x / /8x / /16x / /8x / /16x / /16x / /16x / /16x /16x /8x / /8x / /8x / /8x /2x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-22

91 Part2 SAE 05 Male SAE Straight Thread with O Ring Rigid Straight ISO SAE J516 I.D. Thread A B H SAE series <tab>unf_abw 48 series DN Inch Zoll Size size mm UNF mm A mm B mm W / / / /4x / /4x / /8x To select corresponding O-ring see section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-23

Part2 SAE 06/68 Female JIC 37 SAE 45 Dual Flare Swivel Straight ISO12151-5-SWS DKJ I.D. Thread A B H W SAE 46 06/68 series <tab>unf_abhw 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H mm W 16846-4-4 16848-4-4 6 1/4-4 6.

92 Part2 SAE 06/68 Female JIC 37 SAE 45 Dual Flare Swivel Straight ISO SWS DKJ I.D. Thread A B H W SAE 46 06/68 series <tab>unf_abhw 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H mm W / /16x / /2x / /2x / /16x / /2x / /2x / /16x / /4x / /16x / /2x / /2x / /16x / /4x / /8x / /16x / /4x / /8x / /16x / /4x / /8x / /16x / /4x / /8x / /16x / /16x / /16x /16x /16x /8x / /16x / /16x / /8x / /8x / /8x /2x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-24

93 Part2 SAE 08 Female SAE 45 Swivel Straight SAE J516 I.D. Thread A B H W SAE series <tab>unf_abhw 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H mm W / /8x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-25

Part2 SAE 37/3V Female JIC 37 SAE 45 Dual Flare Swivel Female 45 Elbow ISO 12151-5-SWE 45 DKJ 45 I.D. Thread A B E W SAE 46 37/3V series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 13V46-4-4 13V48-4-4 6 1/4-4 6.

94 Part2 SAE 37/3V Female JIC 37 SAE 45 Dual Flare Swivel Female 45 Elbow ISO SWE 45 DKJ 45 I.D. Thread A B E W SAE 46 37/3V series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 13V V / /16x V V / /2x / /16x V V / /2x / /16x / /16x V V / /4x V V / / V V / /4x V V / /8x V V / /8x / /16x / /16x / /16x / /16x /16x /16x /8x / /8x / /8x / /8x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-26

95 Part2 SAE 39/3W Female JIC 37 SAE 45 Dual Flare Swivel Female 90 Elbow ISO SWES DKJ 90 I.D. Thread A B E W SAE 46 39/3W series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 13W W / /16x W W / /2x / /16x W W / /2x / /16x W W / /16x / /16x W W / /4x W W / /8x / /16x W W / /4x W W / /8x W W / /8x / /16x / /16x / /16x / /16x /16x /16x /8x / /8x / /8x / /8x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-27

Part2 SAE 41/3Y Female JIC 37 / 45 Swivel Female 90 Elbow (Long) ISO 12151-5-SWEL DK

4 7/16x20 61 37 46 17 14146-6-4 14148-6-4 6 1/4-4 6.4 9/16x18 57 34 55 19 14146-6-6 14148-6-6 10 3/8-6 9.5 9/16x18 57 34 54 19 13Y46-8-6 13Y48-8-6 10 3/8-6 9.

96 Part2 SAE 41/3Y Female JIC 37 / 45 Swivel Female 90 Elbow (Long) ISO SWEL DKJ 90 L I.D. Thread A B E W SAE 46 41/3Y series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 13Y Y / /16x / /16x / /16x Y Y / /4x Y Y / /4x Y Y / /8x / /16x /16x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-28

97 Part2 Flange 15 ISO Flange Straight ISO S-L SFL (21.0 MPa/ 3000 psi) I.D. Flange A B F Flang 4615 series<tab>flange_abf 48 series DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm F / / / / / / / / / / / / / / / / / / / / / / / / / / / To select corresponding half-flange and O-ring see section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-29

98 Part2 Flange 17 ISO Flange 45 Elbow ISO E45 L SFL 45 (21.0 MPa/ 3000 psi) I.D. Flange A B E F Flang 4617 series<tab>flange_abef 48 series DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm E mm F / / / / / / / / / / / / / / / / / / / / / / / / / To select corresponding half-flange and O-ring see section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-30

99 Part2 Flange 19 ISO Flange 90 Elbow ISO E L SFL 90 (21.0 MPa/ 3000 psi) I.D. Flange A B E F Flang 4619 series<tab>flange_abef 48 series DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm E mm F / / / / / / / / / / / / / / / / / / / / / / / / / / / / / To select corresponding half-flange and O-ring see section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-31

Part2 Part2 Flange 6A ISO 6162-2 Flange Straight ISO 12151-3-S-S SFS (42.0 MPa/ 6000 psi) I.D.

9 3/4 60 35 41 16A46-12-12 16A48-12-12 19 3/4-12 19.1 3/4 96 70 41 16A46-12-16 16A48-12-16 25 1-16 25.4 3/4 99 69 41 16A46-16-16 16A48-16-16 25 1-16 25.4 1 111 81 48 16A46-20-20 31 1 1/4-20 31.

8 2 172 124 79 To select corresponding half-flange and O-ring see section Eb. 6F ISO 6162-2 Flange 45 Elbow Heavy Series ISO 12151-3 E45-S SFS 45 (42.0 MPa/ 6000 psi) I.D.

100 Part2 Part2 Flange 6A ISO Flange Straight ISO S-S SFS (42.0 MPa/ 6000 psi) I.D. Flange A B F Flang 466A series<tab>flange_abf 48 series DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm F 16A A / / A / / A A / / A A / A A A / / A / / A / / A To select corresponding half-flange and O-ring see section Eb. 6F ISO Flange 45 Elbow Heavy Series ISO E45-S SFS 45 (42.0 MPa/ 6000 psi) I.D. Flange A B E F Flang 466F series<tab>flange_abef 48 series DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm E mm F 16F F / / F F F / / F / / F To select corresponding half-flange and O-ring see section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-32

101 Part2 Flange 6N ISO Flange 90 Elbow ISO E-S SFS 90 (42.0 MPa/ 6000 psi) I.D. Flange A B E F Flang 466N series<tab>flange_abef 48 series DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm E mm F 16N N / / N N / / N N / N N / N N N / / N / / N / / N To select corresponding half-flange and O-ring see section Eb. 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-33

Part2 ORFS JC Female ORFS Swivel Straight Short ISO 12151-1 SWSA SAE J516 ORFS I.D.

102 Part2 ORFS JC Female ORFS Swivel Straight Short ISO SWSA SAE J516 ORFS I.D. Thread A B H W ORFS 46 JC series<tab>unf_abhw 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H mm W 1JC JC / /16x JC JC / /16x JC JC / /16x JC JC / /16x JC JC / /16x JC JC / /16x JC JC / /16x JC JC / /16x JC JC / /16x JC JC / x JC JC / /16x JC JC / /16x JC JC / x JC JC / /16x JC JC / x JC JC / /16x JC JC / /16x JC /16x JC JC /16x JC JC /16x JC / /16x JC / /16x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-34

Part2 ORFS JS ORFS Swivel Female (Long) ISO 12151-1-SWSB SAE J516 ORFS I.D.

103 Part2 ORFS JS ORFS Swivel Female (Long) ISO SWSB SAE J516 ORFS I.D. Thread A B H W ORFS 46 JS series<tab>unf_abhw 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H mm W 1JS / /16x JS / /16x JS / /16x JS / /16x JS JS / /16x JS / /16x JS JS / /16x JS JS / /16x JS JS / /16x JS JS / /16x JS JS / x JS JS / x JS JS / /16x JS / x JS JS / /16x JS JS / /16x JS JS /16x JS / /16x JS / /16x JS / x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-35

Part2 ORFS J7 Female ORFS Swivel 45 Elbow ISO 12151-1 SWE 45 SAE J516 ORFS 45 I.D.

104 Part2 ORFS J7 Female ORFS Swivel 45 Elbow ISO SWE 45 SAE J516 ORFS 45 I.D. Thread A B E W ORFS 46 J7 series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 1J J / /16x J J / /16x J J / /16x J J / /16x J J / /16x J J / /16x J / / J / /16x J J / /16x J J / x J J / /16x J J / x J J / /16x J J / x J J / /16x J J / /16x J J /16x J J /16x J J /16x J / /16x J / /16x J / x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-36

Part2 ORFS J9 Female ORFS Swivel 90 Elbow Short Drop ISO 12151-1 SWES SAE J516 ORFS 90 I.D. Thread A B E W ORFS 46 J9 series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 1J946-4-4 1J948-4-4 6 1/4-4 6.

105 Part2 ORFS J9 Female ORFS Swivel 90 Elbow Short Drop ISO SWES SAE J516 ORFS 90 I.D. Thread A B E W ORFS 46 J9 series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 1J J / /16x J J / /16x J / /16x J J / /16x J J / /16x J J / /16x J J / /16x J J / /16x J J / /16x J J / x J J / /16x J J / x J J / /16x J J / x J J / /16x J / /16x J / J /16x J J /16x J J /16x J / /16x J / /16x J / x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-37

Part2 Part2 ORFS J1 Female ORFS Swivel 90 Elbow Long Drop ISO 12151-1 SWEL SAE J 516 ORFS 90 L I.D. Thread A B E W ORFS 46 J1 series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 1J146-4-4 1J148-4-4 6 1/4-4 6.

5 13/16x16 59 37 64 24 1J146-8-8 1J148-8-8 12 1/2-8 12.7 13/16x16 61 37 64 24 1J148-10-8 12 1/2-8 12.7 1x14 66 42 70 30 1J146-10-10 1J148-10-10 16 5/8-10 15.

106 Part2 Part2 ORFS J1 Female ORFS Swivel 90 Elbow Long Drop ISO SWEL SAE J 516 ORFS 90 L I.D. Thread A B E W ORFS 46 J1 series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 1J J / /16x J / /16x J J / /16x J J / /16x J J / /16x J / x J J / x J J / /16x J /16x J5 Female ORFS Swivel 90 Elbow Medium Drop ISO SWEM ORFS 90 M I.D. Thread A B E W ORFS 46 J5 series <tab>unf_abew 48 series DN Inch Zoll Size size mm UNF mm A mm B mm E mm W 1J J / /16x J J / /16x J J / /16x J J / /16x J J / /16x J / x J J / x J J / /16x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-38

Part2 Part2 ORFS JM ORFS Male ISO 12151-1-S SAE J516 I.D. Thread A B H ORFS 46 JM series<tab>unf_abh 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H 1JM48-4-4 6 1/4-4 6.

9 11/16x16 53 26 19 1JM46-6-6 1JM48-6-6 10 3/8-6 9.5 11/16x16 47 24 19 1JM46-8-6 1JM48-8-6 10 3/8-6 9.5 13/16x16 50 27 22 1JM46-8-8 1JM48-8-8 12 1/2-8 12.

9 1 3/16x12 59 34 32 1JM46-12-12 1JM48-12-12 19 3/4-12 19.1 1 3/16x12 61 35 32 1JM46-16-12 1JM48-16-12 19 3/4-12 19.1 1 7/16x12 64 38 41 1JM46-16-16 1JM48-16-16 25 1-16 25.

107 Part2 Part2 ORFS JM ORFS Male ISO S SAE J516 I.D. Thread A B H ORFS 46 JM series<tab>unf_abh 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H 1JM / /16x JM / /16x JM / /16x JM / /16x JM JM / /16x JM JM / /16x JM JM / /16x JM JM / /16x JM JM / x JM JM / x JM JM / /16x JM JM / /16x JM JM / /16x JM JM /16x JM JM /16x JM / /16x To select corresponding O-ring see section Eb. JD Male ORFS Bulkhead with Locknut Straight (with O ring) ISO SAE J516 I.D. Thread A B H W ORFS 46 JD series<tab>unf_abhw 48 series DN Inch Zoll Size size mm UNF mm A mm B mm H mm W 1JD JD / /16x JD JD / /16x JD JD / /16x JD JD / x JD JD / /16x JD /16x To select corresponding O-ring see section Eb. 46 or RH 461LT ST ST TWIN 301SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-39

108 Part2 Part2 JIS FU Female BSP Parallel Pipe Swivel Straight (30 Flare) ISO JIS B8363 GUI I.D. Thread A B H W JIS 46 FU series <tab>bsp_abhw 48 series DN Inch Zoll Size size mm BSP mm A mm B mm H mm W 1FU FU / /4x FU FU / /8x FU FU / /4x FU FU x GU Female BSP Parallel Pipe Swivel Straight (60 Cone) ISO JIS B8363 GUO I.D. Thread A B H W JIS 46 GU series <tab>bsp_abhw 48 series DN Inch Zoll Size size mm BSP mm A mm B mm H mm W 1GU GU / /4x GU GU / /8x GU GU / /2x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-40

109 Part2 Part2 JIS MU Female Metric Swivel Straight (30 Flare) JIS B8363 MU I.D. Thread A B H W JIS 46 MU series <tab>met_abhw 48 series DN Inch Zoll Size size mm METRIC metric mm A mm B mm H mm W 1MU MU / M14x MU / M18x MU MU / M18x MU MU / M22x MZ Female Metric Swivel 90 Elbow (30 Flare) JIS B8363 I.D. Thread A B E W JIS 46 MZ series <tab>met_abew 48 series DN Inch Zoll Size size mm METRIC metric mm A mm B mm E mm W 1MZ MZ / M14x MZ MZ / M18x MZ MZ / M22x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-41

110 Part2 Part2 French Standard FG Male French Gas Series Rigid Straight (24 Cone) Tube I.D. Thread O.D. A B H Frenc 46 FG series<tab>met_tube_abh 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm H 1FG FG / M20x FG FG / M20x FG FG / M24x FG FG / M30x FG FG / M36x FG FG M45x F2 Female French Gas Series Swivel 90 Elbow Tube I.D. Thread O.D. A B E W Frenc 46 F2 series<tab>met_tube_abew 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm E mm W 1F F / M20x F F / M20x F F / M24x F F / M30x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-42

111 Part2 Part2 French Standard F4 Female French Gas Series Swivel Straight (Ball Nose) Tube I.D. Thread O.D. A B W Frenc 46 F4 series<tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1F F / M20x F F / M20x F F / M20x F F / M24x F F / M30x F F / M36x F F M45x F6 French Male Metric Series (24 Cone) Tube I.D. Thread O.D. A B H Frenc 46 F6 series<tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1F F / M20x F F / M27x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-43

112 Part2 Part2 French Standard F9 French Female Metric Series Swivel (Ball Nose) Tube I.D. Thread O.D. A B W Frenc 46 F9 series<tab>met_tube_abw 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B mm W 1F F / M12x F F / M16x F F / M20x F F / M27x F F / M30x F F / M33x F F M39x FA Metric Male for Agriculture Valves I.D. Thread A B H Frenc 46 FA series<tab>met_abw 48 series DN Inch Zoll Size size mm METRIC metric mm A mm B mm W 1FA FA / M18x FA FA / M18x FA FA / M18x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-44

Part2 Part2 High Pressure Cleaning CW Power Cleaner Connection Tube I.D.

A B Clean 46 CW series<tab>met_tube_ab 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B 1CW46-15-4 1CW48-15-4 6

5 15 52 29 1CW46-15-8 1CW48-15-8 12 1/2-8 12.7 M22x1.5 15 53 29 Rubber hand grip Part-No.

Thread A B Clean 46 NW series <tab>met_ab 48 series DN Inch Zoll Size size mm METRIC metric mm A mm B 1NW46-15-4 1NW48-15-4 6

113 Part2 Part2 High Pressure Cleaning CW Power Cleaner Connection Tube I.D. Thread O.D. A B Clean 46 CW series<tab>met_tube_ab 48 series DN Inch Zoll Size size mm METRIC metric mm TUB mm A mm B 1CW CW / M22x CW CW / M22x CW CW / M22x CW CW / M22x Rubber hand grip Part-No. WKS-X-XXX in black or blue please find on page Eb-17. NW Female Kärcher Metric Cleaning Fitting Swivel Straight I.D. Thread A B Clean 46 NW series <tab>met_ab 48 series DN Inch Zoll Size size mm METRIC metric mm A mm B 1NW NW / M22x NW NW / M22x NW NW / M22x Rubber hand grip Part-No. WKS-X-XXX in black or blue please find on page Eb or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-45

4 11 60 37 1PW46-10-5 1PW48-10-5 8 5/16-5 7.9 10 60 36 1PW46-11-5 1PW48-11-5 8 5/16-5 7.9 11 61 37 1PW46-10-6 1PW48-10-6 10 3/8-6 9.5 10 60 37 Rubber hand grip Part-No.

114 Part2 High Pressure Cleaning PW Male Kärcher Metric Cleaning Fitting Rigid Straight I.D. Thread A B Clean 46 PW series<tab>tube_ab 48 series DN Inch Zoll Size size mm metric TUB mm A mm B 1PW PW / PW PW / PW PW / PW PW / PW PW / Rubber hand grip Part-No. WKS-X-XXX in black or blue please find on page Eb-17. 1PWxx-11-x = with ball bearing as shown above 1PWxx-10-x = without ball bearing 46 or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-46

Part2 Part2 Others XU Female Metric Swivel Straight (30 Flare) JIS B8363 I.D.

9 M24x1.5 69 44 30 32 1XU48-12-12 19 3/4-12 19.1 M30x1.5 73 47 32 36 DK

Thread A B H W Other 46 DK series<tab>met_abhw 48 series DN Inch Zoll Size size mm METRIC metric mm A mm B mm H mm W 1DK46-10-5 1DK48-10-5 8

115 Part2 Part2 Others XU Female Metric Swivel Straight (30 Flare) JIS B8363 I.D. Thread A B H W Other 46 XU series<tab>met_abhw 48 series DN Inch Zoll Size size mm METRIC UNF mm A mm B mm H mm W 1XU / M24x XU / M30x DK Male Metric L Rigid Bulkhead with Locknut (24 Cone) I.D. Thread A B H W Other 46 DK series<tab>met_abhw 48 series DN Inch Zoll Size size mm METRIC metric mm A mm B mm H mm W 1DK DK / M16x DK DK / M22x DK / M26x DK / M26x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-47

116 Part2 Others DX Female Metric Swivel (M27x2) O Ring Light Series I.D. Thread A B W Other 46 DX series<tab>met_abw 48 series DN Inch Zoll Size size mm METRIC metric mm A mm B mm W 1DX DX / M27x or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-48

Part2 Part2 UPTC EN UPTC Male Straight Tube I.D.

4 8 49 26 1EN46-10-5 1EN48-10-5 8 5/16-5 7.9 10 50 26 1EN46-12-6 1EN48-12-6 10 3/8-6 9.

9 18 56 31 1EN46-22-12 1EN48-22-12 19 3/4-12 19.1 22 57 32 EU UPTC Male 45 Elbow Tube I.D.

1/4-4 6.4 8 66 43 23 1EU46-10-5 1EU48-10-5 8 5/16-5 7.9 10 68 45 23 1EU46-12-6 1EU48-12-6 10 3/8-6 9.

117 Part2 Part2 UPTC EN UPTC Male Straight Tube I.D. O.D. A B UPTC 46 EN series<tab>tube_ab 48 series DN Inch Zoll Size size mm mm TUB mm A mm B 1EN EN / EN EN / EN EN / EN EN / EN EN / EN EN / EU UPTC Male 45 Elbow Tube I.D. O.D. A B E UPTC 46 EU series<tab>tube_abe 48 series DN Inch Zoll Size size mm mm TUB mm A mm B mm E 1EU EU / EU EU / EU EU / EU EU / EU EU / EU EU / or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-49

4 8 59 36 39 1ET46-10-5 1ET48-10-5 8 5/16-5 7.9 10 58 35 39 1ET46-12-6 1ET48-12-6 10 3/8-6 9.5 12 57 34 40 1ET46-15-8 1ET48-15-8 12 1/2-8 12.

118 Part2 UPTC ET UPTC Male 90 Elbow Tube I.D. O.D. A B E UPTC 46 ET series <tab>tube_abe 48 series DN Inch Zoll Size size mm mm TUB mm A mm B mm E 1ET ET / ET ET / ET ET / ET ET / ET ET / ET ET / or RH 461LT ST ST TWIN SN 301TC TC 421RH 421SN TC 462CLF 462TC TC 472TC ST Cc-50

119 Notes

Overview 2piece Series 48 Shell 10048 Cd-1 Page Cd-1 No-Skive shell SAE 01

Cd-2 Page Cd-2 ISO 6162-1 Flange Straight ISO 12151-3-S-L SFL (21.

120 Overview 2piece Series 48 Shell Cd-1 Page Cd-1 No-Skive shell SAE 01 Cd-1 Page Cd-1 Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN Flange 15 Cd-2 Page Cd-2 ISO Flange Straight ISO S-L SFL (21.0 MPa/ 3000 psi) Crimp Diameters please find on Cd-Index

121 DN Shell / SAE 2piece Series No-Skive shell Only for use with adjustable crimpers. I.D. B DN Inch Size mm mm / Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN 2piece Series 48 I.D. Thread A B H SAE 01 <tab>nptf_abh DN Inch Zoll Size size mm NPTF mm A mm B mm H K / K TC Cd-1

DN Flange 2piece Series 48 15 ISO 6162-1 Flange Straight ISO

5 2 1/2 127 65 84 K1547-48-40 63 2 1/2-40 63.

122 DN Flange 2piece Series ISO Flange Straight ISO S-L SFL (21.0 MPa/ 3000 psi) I.D. Flange A B F Flang 6A <tab>flange_abf DN Inch Zoll Size size mm FLANGE Inch mm A mm B mm F K / / K / K To select corresponding half-flange and O-ring see section Eb TC Cd-2

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements

Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant