-06 2, , , , , , , , ,780 SAE 100R16 Type S -08 4, , ,390

Transcription

1 Series 2SC-XD -04 6,530 2SC-XD / 2 SNK -06 5,585 Type 1SN -04 3,045 DIN EN 853 1SN -06 2, , , ,275 Braided 1-Wire 1SN is an Upgrade from SAE 100R1T Braided 2-Wire Extreme Flex - 1 Million Cycles Index Series Page 1SN / R1T 2 XtremeDuty 3 4SH -12 6,090 DIN EN 856 4SH -16 5,510 4-Spiral Wire Great Value 4SH 4 R12-XD -06 4,060 SAE 100R12-XD -08 4, , ,060 R16-2SC -04 5,800 DIN EN 857 2SC / -06 4,780 SAE 100R16 Type S -08 4, , ,390 R17-G -04 3,045 SAE 100R , , , ,045 4-Spiral Wire Extreme Flex - 1 Million Cycles 2-Wire Braid Can Replace 6 s R16, R17, R19, 2SN, R2AT & 2SC 2-Wire Braid Best Value for 3,000 PSI Applications XtremeDuty 5 6-IN-1 6 WorkHorse 7 PJH ,000 Hydraulic Jack ,000 2-Wire Braid JACK 8 PJ -04 3,000 Washer -06 3, ,000 1-Wire Braid JET 9 PJXD -04 5,000 Washer -06 5, ,500 2-Wire Braid Very Flexible with Long Life JET XtremeDuty 10 PL Push-Lock Rating & Radius charts are on page Page 1 1-Yarn Braid Insta-Grip

2 DIN EN 853 1SN 1SN DIN EN 853 1SN / SAE 100R1 S Non-Skive MSHA Flame Resistant Actual Layline is Black on Black Molded-Embossed Radius Fitting R17-04G* 1/ , , H2 / OPB / P2 1SN-06 3/ , , H2 / OPB / P2 1SN-08 1/ , , H2 / OPB / P2 1SN-12 3/ , , H2 / OPB / P2 1SN , , H2 / OPB / P2 Description 1-Wire braid low-medium pressure hydraulic hose that exceeds SAE 100R1AT, with greater pressure (DIN EN 853 1SN) to meet the demands in today s rugged environments. One High Tensile Steel Wire Braid High Ozone Resistance Weather Resistant Synthetic Rubber High Abrasion Resistance, More Than 2x the SAE Abrasion Resistance Standard +248 F (+120 C) Maximum Intermittent Non-Skive, Does Not Need to be Removed Abrasion Resistance Is More Than Double SAE 4:1 Safety Factor Reel Quantities * R17-04G replaces 1SN-04. Page 2

3 Actual Layline is Black on Black Molded-Embossed 2SC-XD / 2 SNK 2SC-XD 2SC XtremeDuty Non-Skive MSHA Million Cycle Impulse Tested * * Radius* Fitting* 2SC-XD-04 1/ ,530 1,800 26, H4 / OPNS / P4 2SC-XD-06 3/ ,585 1,540 22, H4 / OPNS / P4 2SC XtremeDuty 2SC XtremeDuty high pressure 2-wire hydraulic hose with greater flexibility (2 SNK) and 1 million cycle impulse tested longevity. * Two High Tensile Steel Wire Braids High Ozone Resistance Weather Resistant Synthetic Rubber High Abrasion Resistance, More Than 2x the SAE Abrasion Resistance Standard +248 F (+120 C) Maximum Intermittent 2SC XtremeDuty Tight Radius with High and s 1 Million Cycle Impulse Tested* Non-Skive, Does Not Need to be Removed Abrasion Resistance Is More Than Double SAE 4:1 Safety Factor Reel Quantities * rating, bend radius, and cycle life can be reduced 50% or more if Connections 4-wire hose fittings are not used, and /or the recommended crimp procedures, including crimp specifications, are not followed. Under development, to be released 1st quarter 2011, samples can be provided. Page 3

4 DIN EN 856 4SH 4SH DIN EN 856 4SH MSHA Flame Resistant Actual Layline is Black on Black Molded-Embossed Radius Fitting 4SH-12 3/ ,090 1,680 24, H6 / OPS / P6 4SH ,510 1,520 22, H6 / OPS / P6 Description 4-Spiral-Wire hose has been impulse tested to 400,000 cycles to ensure durability. The -12 size compares to SAE 100R13 for its light weight and SAE 100R15 for its high pressure. The -16 size compares to SAE 100R15 for lighter weight. Four High Tensile Steel Wire Spiral Layers High Ozone Resistance Weather Resistant Synthetic Rubber High Abrasion Resistance, More Than 2x the SAE Abrasion Resistance Standard 248 F (+120 C) Maximum Intermittent 400,000 Cycle Impulse Tested Abrasion Resistance Is More Than Double SAE 4:1 Safety Factor Coil Quantities Coil Ft Under development, to be released 1st quarter 2011, samples can be provided. Page 4

5 Actual Layline is Grey on Grey Molded-Embossed SAE 100R12-XD R12-XD SAE 100R12-XD XtremeDuty Million Cycle MSHA 4,060 PSI Radius* Fitting With Skive 6-Wire Fittings R12-XD-06 3/ , , H6 / OPS / P6 R12-XD-08 1/ , , H6 / OPS / P6 R12-XD-12 3/ ,060 1,120 16, H6 / OPS / P6 R12-XD ,060 1,120 16, H6 / OPS / P6 With Non-Skive 4-Wire Fittings R12-XD-06 3/ , , * 4.9* H4 / OPNS / P4* R12-XD-08 1/ , , * 7.0* H4 / OPNS / P4* R12-XD-12 3/ ,060 1,120 16, * 9.5* H4 / OPNS / P4* R12-XD ,060 1,120 16, * 12.0* H4 / OPNS / P4* R12-XD XtremeDuty 4-Spiral-Wire XtremeDuty hydraulic hose exceeds SAE 100R12 / DIN EN 856 R12 specifications, and is impulse tested at 1 million cycles offering greater flexibility and durability. * High Ozone and Weather Resistant Synthetic Rubber High Abrasion Resistance, More Than the 2x SAE Standard Grey on Grey Molded-Embossed Layline Extreme Flexibility and Durability, Exceeds SAE 100R12 / DIN EN 856 R12 Requirements Non-Skive, Does Not Need to be Removed* 4-Spiral-Wire XtremeDuty 1 Million Cycle Impulse Tested* 4,060 PSI Isobaric Rating, 4:1 Safety Factor Four High Tensile Steel Wire Spiral Layers +248 F (+120 C) Max. Intermittent Coil Quantities Coil Ft Ref. Aeroquip FC659 Parker 721 This is One of the Most Flexible Hydraulic s on the Planet * The 1 million cycle testing was done with Skive Type H6 / OPS / P6 fittings crimped to Connections specifications. radius and cycle life can be reduced 50% or more if Connections skive 6-wire hose fittings are not used, and /or the recommended crimp procedures, including crimp specifications, are not followed. Under development, to be released 1st quarter 2011, samples can be provided. Page 5

6 DIN EN 857 2SC / SAE 100R16 Type S R16-2SC 6-in-1 100R16 Type S, DIN EN 857 2SC Non-Skive MSHA Flame Resistant Actual Layline is Black on Black Molded-Embossed * * Radius* Fitting* R16-2SC-04 1/ ,800 1,600 23, H2 / OPB / P2 R16-2SC-06 3/ ,780 1,320 19, H2 / OPB / P2 R16-2SC-08 1/ ,000 1,104 16, H2 / OPB / P2 R16-2SC-12 3/ , , H2 / OPB / P2 R16-2SC , , H2 / OPB / P2 6-in-1 Reduces Inventory The 6-in-1 series meets or exceeds, and can replace: SAE 100R19, DIN EN 857 2SC, SAE 100R17, SAE 100R16, SAE 100R2AT, and 2SN for most applications. Two High Tensile Steel Wire Braids High Ozone Resistance Weather Resistant Synthetic Rubber High Abrasion Resistance, More Than 2x the SAE Abrasion Resistance Standard Increased Durability to Spikes Over SAE 100R2AT and SAE 100R16 Tight Radii Increases Cycling Durability Over SAE 100R2AT and 2SN +248 F (+120 C) Max. Intermittent Minimum Radii meets SAE 100R16, SAE 100R19, SAE 100R17, and 2SC Radius and Exceeds SAE 100R2AT 4:1 Safety Factor Exceeds 100R17 Specifications -04 Through -12 Meets or Exceeds SAE 100R19, SAE 100R17, SAE 100R16, DIN EN 857 2SC, and 2SN Non-Skive, Does Not Need to be Removed Comparable to ISO Type 2SC Reel Quantities Ref. Aeroquip GH781 Parker 462-Elite * All specifications above are based on Connections fittings. Tests on Eaton Weatherhead non bite-to-wire style fittings indicate a 16-39% reduction in pressure performance and a 40-50% reduction in bend radii. Therefore, no warranty is expressed or implied when used with other brand hose fittings on Connections hoses. SAE 100R19 sizes -04, -06, and -08 only. SAE 100R17 sizes -04, -06, -08, and -12 only. Page 6

7 SAE 100R17 Actual Layline is Black on Black Molded-Embossed R17-G WorkHorse 3,045 PSI Non-Skive MSHA Flame Resistant Radius Fitting R17-04G 1/ , , H2 / OPB / P2 R17-06G 3/ , , H2 / OPB / P2 R17-08G 1/ , , H2 / OPB / P2 R16-2SC-12* 3/ , , H2 / OPB / P2 R17-16G , , H2 / OPB / P2 WorkHorse Our R17-G WorkHorse is a 1-wire or 2-wire braid depending on the size. It is one of our most popular hoses suitable for 3,045 PSI applications. One High Tensile Steel Wire Braid: -04G, -06G, -08G Two High Tensile Steel Wire Braids: -12, -16G High Ozone Resistance Weather Resistant Synthetic Rubber High Abrasion Resistance, More Than 2x the SAE Abrasion Resistance Standard +248 F (+120 C) Maximum Intermittent The 04 and 06 s Can Replace SAE 100R16, SAE 100R2AT, and 1SN s The 08 Can Replace SAE 100R16 and SAE 100R2AT s The 12 Can Replace 2SC and 2SN s Non-Skive, Does Not Need to be Removed Isobaric at 3,045 PSI 4:1 Safety Factor Reel Quantities Ref. Aeroquip FC639 Gates Mega3000 (M3K) Parker 451 Weatherhead H145 * R16-2SC-12 replaces R17-12G. Page 7

8 Hydraulic Jack PJH JACK 10,000 PSI Non-Skive MSHA Flame Resistant Actual Layline is Black on Black Molded-Embossed Radius Fitting PJH-04 1/ ,000 1,380 20, H2 / OPB / P2 PJH-06* 3/ ,000 1,380 20, H2 / OPB / P2 JACK JACK hose is a 2-wire steel braided ultra-high pressure hydraulic jack hose specifically designed for high pressures found in hydraulic jack applications. Two High Tensile Steel Wire Braids High Ozone Resistance Weather Resistant Synthetic Rubber High Abrasion Resistance, More Than 2x the SAE Abrasion Resistance Standard +248 F (+120 C) Maximum Intermittent JACK is Rated at 10,000 PSI to Withstand Spikes Found in Hydraulic Jack Applications Non-Skive, Does Not Need to be Removed 2:1 Safety Factor Reel Quantities * -06 size to be released 1st quarter 2011, samples can be provided. Page 8

9 Actual Layline is Black on Black Molded-Embossed Washer PJ JET Non-Skive Washer 3,000 PSI Radius Fitting PJ-04 1/ , , H2 / OPB / P2 PJ-06 3/ , , H2 / OPB / P2 PJ-08* 1/ , , H2 / OPB / P2 JET JET 1-wire Washer, Car Wash, and Carpet Cleaning Black Synthetic Rubber Resistant to All Commercial Detergents One High Tensile Steel Wire Braid Standard Black Synthetic Rubber with Fabric Impression Up to +300 F (Up to +150 C) Intermitent Maximum Service JET Washer is a Crimp-Ready Using Standard H2 / OPB / P2 Crimp Fittings This Does NOT Need to be Pin-Pricked for Most Applications Non-Skive, Does Not Need to be Removed Isobaric 3,000 PSI 4:1 Safety Factor Coil Quantities * -08 size to be released 1st quarter 2011, samples can be provided. Page 9

10 Washer PJXD JET XtremeDuty Long Life Washer 5,000 PSI Non-Skive Actual Layline is Black on Black Molded-Embossed * * Radius* Fitting* PJXD-04 1/ , H2 / OPB / P2 PJXD-06 3/ , H2 / OPB / P2 PJXD-08 1/ , H2 / OPB / P2 JET XtremeDuty Long Life JET XtremeDuty Washer is Engineered to Provide Long Life With High and Great Flexibility. This Does NOT Need to be Pin-Pricked for Most Applications. Black Synthetic Rubber Two High Tensile Steel Wire Braids Compact Construction Standard Black Wrapped Synthetic Rubber Up to +300 F (Up to +150 C) Intermitent Maximum Service JET XtremeDuty Washer is Engineered for Long Life This Does NOT Need to be Pin-Pricked for Most Applications Crimp-Ready Using Standard H2 / OPB / P2 Crimp Fittings* Non-Skive, Does Not Need to be Removed Coil Quantities * All specifications above are based on Connections fittings. Tests on Eaton Weatherhead non bite-to-wire style fittings indicate a 16-39% reduction in pressure performance and a 40-50% reduction in bend radii. Therefore, no warranty is expressed or implied when used with other brand hose fittings on Connections hoses. To be released 1st quarter 2011, samples can be provided. Page 10

11 Push-Lock PL Insta-Grip 300 Push-Lock 300 PSI Radius Push-Lock dash size in mm in mm in bar psi bar psi mm in kg / m lbs / ft Barb PL-04 1/ , Series* PL-05 5/ , Series* PL-06 3/ , Series* PL-08 1/ , Series* PL-10 5/ , Series* PL-12 3/ , Series* Insta-Grip 300 For use with Connections Push-Lock Barbs in low pressure hydraulic and pneumatic systems such as shop air systems, general industrial, maintenance, and automotive assembly applications. Nonconductive, minimum electrical resistance, greater than one (1) megohm of hose length per inch of hose length at 1,000 volts DC. Chemivic Oil and Heat Resistant Synthetic Rubber, RMA Class A (High Oil Resistance) Silicone is NOT Used in the Manufacturing of This 1-Braided High Strength Synthetic Yarn Laid at the Most Effective Angle for Maximum Strength and Barb Holding Ability Standard Black, Optional: Blue, Green, Grey and Red Weather, Abrasion and, RMA Class B (Medium Oil-Resistance) -40 to +190 F (-40 to +88 C) Non-conductive Non-silicone Manufacturing Process Air and Oil Compatability Push-Lock Barbs Do NOT Require a Clamp* Reel Quantities Made in the U.S.A. * See Our Brass Barb and Fitting Catalog for all of the different styles of Push-Lock series hose barbs. Chemivic is a registered trademark of Goodyear Page 11

12 Rating & Radius Charts Series Rating Chart P S I Type Page PJH All 10,000 Hydraulic Jack 8 2SC-XD -04 6,530 2SC-XD / 2 SNK 3 4SH -12 6,090 DIN EN 856 4SH 4 R16-2SC -04 5,800 DIN EN 857 2SC 6 2SC-XD -06 5,585 2SC-XD / 2 SNK 3 4SH -16 5,510 DIN EN 856 4SH 4 PJXD All 5,000 Washer XD 10 R16-2SC -06 4,780 DIN EN 857 2SC 6 R12-XD All 4,060 SAE 100R12-XD 5 R16-2SC -08 4,000 DIN EN 857 2SC 6 1SN -04 3,265 DIN EN 853 1SN 2 R16-2SC -12 3,110 DIN EN 857 2SC 6 R17-G All 3,045 SAE 100R17 7 PJ All 3,000 Washer 9 1SN -06 2,610 DIN EN 853 1SN 2 R16-2SC -16 2,390 DIN EN 857 2SC 6 1SN -08 2,320 DIN EN 853 1SN 2 1SN -16 1,275 DIN EN 853 1SN 2 PL All 300 Push-Lock 11 Series Radius Chart Radius Type Page R17-G SAE 100R17 7 2SC-XD SC-XD / 2 SNK 3 R16-2SC DIN EN 857 2SC 6 R16-2SC DIN EN 857 2SC 6 R17-G SAE 100R17 7 R12-XD SAE 100R12-XD 5 R16-2SC DIN EN 857 2SC 6 R17-G SAE 100R17 7 1SN DIN EN 853 1SN 2 R17-G SAE 100R17 7 R16-2SC DIN EN 857 2SC 6 R12-XD SAE 100R12-XD 5 1SN DIN EN 853 1SN 2 R12-XD SAE 100R12-XD 5 4SH DIN EN 856 4SH 4 1SN DIN EN 853 1SN 2 R12-XD SAE 100R12-XD 5 4SH DIN EN 856 4SH 4 Page 12