I Plexagon, LLC. Catalog - December 18th, 2013
|
|
|
- Sophie Rice
- 5 years ago
- Views:
Transcription
1 Plexagon, LLC Catalog - December 18th, 2013 The data reported in this catalog are not binding. Plexagon reserves the right to change specifications without notice I
2 HOSE SIZE 2. FITTING SIZES K FJS 3. SERIES 04 = 1/4 04 = 1/4 K 06 = 3/8 06 = 3/8 J 08 = 1/2 08 = 1/2 H 10 = 5/8 10 = 5/8 HLZ 12 = 3/4 12 = 3/4 16 = 1 16 = 1 20 = 1-1/4 20 = 1-1/4 24 = 1-1/2 24 = 1-1/2 32 = 2 32 = 2 4. CONNECTION FBSPORS FEMALE BRITISH STANDARD PIPE O-RING FBSPORS45 FEMALE BRITISH STANDARD PIPE O-RING-45 FBSPORS90 FEMALE BRITISH STANDARD PIPE O-RING-90 FDHORS FEMALE DIN HEAVY O-RING SWIVEL FDHORS45 FEMALE DIN HEAVY O-RING SWIVEL-45 FDHORS90 FEMALE DIN HEAVY O-RING SWIVEL-90 FDLORS FEMALE DIN LIGHT O-RING SWIVEL FDLORS90 FEMALE DIN LIGHT O-RING SWIVEL-90 FFORS FEMALE FLAT-FACE O-RING FFORS45 FEMALE FLAT-FACE O-RING-45 FFORS90 FEMALE FLAT-FACE O-RING-90 FFORS90L FEMALE FLAT-FACE O-RING-90 LONG FJISS FEMALE JAPANESE INDUSTRIAL STANDARD SWIVEL FJS FEMALE JIC 37 FLARE SWIVEL FJS45 FEMALE JIC 37 FLARE SWIVEL-45 FJS90 FEMALE JIC 37 FLARE SWIVEL-90 FKS FEMALE KOMATSU SWIVEL FKS45 FEMALE KOMATSU SWIVEL-45 FKS90 FEMALE KOMATSU SWIVEL-90 FL FLANGE CODE 61 FL22 FLANGE CODE FL30 FLANGE CODE FL45 FLANGE CODE FL90 FLANGE CODE FL90L FLANGE CODE 61-90L FLC FLANGE CAT FLC22 FLANGE CAT-22 FLC30 FLANGE CAT-30 FLC45 FLANGE CAT-45 FLC90 FLANGE CAT-90 FLH FLANGE CODE 62 FLH45 FLANGE CODE FLH90 FLANGE CODE FPS FEMALE PIPE SWIVEL MB MALE O-RING BOSS MBS MALE O-RING BOSS SWIVEL MBSPP MALE BRITISH STD PARALLEL PIPE MBSPT MALE BRITISH STD PIPE TAPERED MFA SAE MALE FLARELESS ASSEMBLY MFFOR MALE FLAT-FACE O-RING MIS SAE MALE INVERTED SWIVEL MJ MALE JIC 37 FLARE MP MALE PIPE MPS MALE PIPE SWIVEL MPS90 MALE PIPE SWIVEL-90
3 Plex-Flex 1SN ONE WIRE BRAID HOSE EXCEEDS SAE 100R1AT 2 - One high tensile steel wire braid 3 - Synthetic rubber cover, MSHA flame Resistant PF1SN Hydraulic oils, both mineral and biological Polyglycol base oils, water/oil emulsions and water MARCATURA Hydraulic oils: -40 C to +100 C (-40 F to +212 F) occasional peaks up to +125 C (+250 F) to +85 C (+185 F) PF1SN04 1/ PF1SN06 3/ PF1SN08 1/ PF1SN10 5/ PF1SN12 3/ PF1SN PF1SN20 1 1/ PF1SN24 1 1/ PF1SN COMPATIBILITY CHART BETWEEN THIS HOSE AND APPROVED FITTINGS PF1SN Piece No-skive: K series 0.657" 0.823" 0.953" 1.083" 1.252" No-skive: J series 0.854" 0.935" 1.220" 1.299" 1.626" 2.020" 2.362" 2.752" Plexagon, LLC. All rights are reserved - 3
4 Plex-Flex 2SN TWO WIRE BRAID HOSE 2SN 100R2S PF2SN 2 - Two high tensile steel wire braids 3 - Synthetic rubber cover MSHA flame resistant Hydraulic oils both mineral and biological, polyglycol base oils, water-oil emulsions and water Hydraulic oils: -40 C to +100 C (-40 F to +212 F) occasional peaks up to +125 C (+250 F) to +85 C (+185 F) PF2SN04 1/ PF2SN06 3/ PF2SN08 1/ PF2SN10 5/ PF2SN12 3/ PF2SN PF2SN20 1 1/ PF2SN24 1 1/ PF2SN COMPATIBILITY CHART BETWEEN THIS HOSE AND APPROVED FITTINGS PF2SN Piece No-skive: K series 0.685" 0.866" 1.004" 1.134" 1.295" 1.638" No-skive: J series 0.898" 0.980" 1.268" 1.343" 1.665" 2.063" 2.398" 2.870" 4 - Plexagon, LLC. All rights are reserved P I
5 Plex-Flex 2SNK EXCEEDS DIN EN 857 2SC AND SAE 100R16-S PF2SNK 2 - Two high tensile steel wire braids 3 - Synthetic rubber cover MSHA flame flame resistant Hydraulic oils, both mineral and biological, polyglycol base oils, water-oil emulsions and water Hydraulic oils: -40 C to +100 C (-40 F to +212 F) to +85 C (+185 F) PF2SNK04 1/ PF2SNK06 3/ PF2SNK08 1/ PF2SNK10 5/ PF2SNK12 3/ PF2SNK COMPATIBILITY CHART BETWEEN THIS HOSE AND APPROVED FITTINGS PF2SNK Piece No-skive: K series 0.669" 0.807" 0.976" 1.122" 1.252" 1.547" No-skive: J series Plexagon, LLC. All rights are reserved - 5
6 Plex-Flex 100R16 SAE 100R16S PFR Two high tensile steel wire braids 3 - Synthetic rubber cover Hydraulic oils, both mineral and biological, polyglycol base oils, water-oil emulsions and water Hydraulic oils: -40 C to +100 C (-40 F to +212 F) to +85 C (+185 F) PFR1604 1/ PFR1606 3/ PFR1608 1/ PFR1610* 5/ PFR1612 3/ PFR * Available upon request COMPATIBILITY CHART BETWEEN THIS HOSE AND APPROVED FITTINGS PFR Piece No-skive: K series 0.669" 0.839" 0.996" 1.114" 1.252" 1.598" No-skive: J series 0.866" 0.961" 1.220" 1.299" 1.602" 6 - Plexagon, LLC. All rights are reserved P I
7 Plex-Flex 100R17 SAE 100R17 PFR Sizes -04 through -08 have one high tensile steel wire braid; sizes -10 and up have two high tensile steel wire braids 3 - Synthetic rubber cover MSHA flame resistant Hydraulic oils, both mineral and biological, polyglycol base oils, water-oil emulsions and water Hydraulic oils: -40 C to +100 C (-40 F to +212 F) to +85 C (+185 F) PFR1704 1/ PFR1706 3/ PFR1708 1/ PFR1710* 5/ PFR1712 3/ PFR * Available upon request COMPATIBILITY CHART BETWEEN THIS HOSE AND APPROVED FITTINGS PFR Piece No-skive: K series 0.630" 0.780" 0.917" 1.134" 1.252" 1.555" No-skive: J series Plexagon, LLC. All rights are reserved - 7
8 Plex-Force 100R12 EXCEEDS SAE 100R12 PFR Four high tensile steel wire spirals 3 - Synthetic rubber cover MSHA flame resistant High pressure hydraulic system with extreme high pressure peaks for use with hydraulic oils, both mineral and biological, polyglycol base oils, water-oil emulsions and water Hydraulic oils: -40 C to +100 C (-40 F to +212 F) occasional peaks up to +125 C (+250 F) to +85 C (+185 F) PFR1206 3/ PFR1208 1/ PFR1210 5/ PFR1212 3/ PFR PFR / PFR / PFR COMPATIBILITY CHART BETWEEN THIS HOSE AND APPROVED FITTINGS PFR Piece No-skive: J series 0.921" 1.000" 1.260" 1.386" 1.630" 2.043" 2.374" 2.945" 8 - Plexagon, LLC. All rights are reserved P I
9 Plex-Force 100R13 EN 856 / SAE 100R13 PFR Four high tensile steel wire spirals for sizes 12 and 16 and six high tensile steel wire spirals for other sizes 3 - Synthetic rubber cover MSHA flame resistant High pressure hydraulic system with extreme high pressure peaks for use with hydraulic oils, both mineral and biological, polyglycol base oils, water-oil emulsions and water Hydraulic oils: -40 C to +121 C (-40 F to +250 F) occasional peaks up to +125 C (+257 F) to +85 C (+185 F) PFR1312 3/ PFR PFR / PFR / PFR COMPATIBILITY CHART BETWEEN THIS HOSE AND APPROVED FITTINGS PFR Piece No-skive: J series 0.929" 1.008" 1.276" 1.398" 1.646" No-skive: H series 2.244" 2.508" 3.102" Plexagon, LLC. All rights are reserved - 9
10 Plex-Force 100R15 FOUR OR SIX WIRE SPIRAL HOSE SAE 100R15 PFR Four high tensile steel wire spirals for size 12 and 16 and six high tensile steel wire spirals for other sizes 3 - Synthetic rubber cover MSHA flame resistant High pressure hydraulic system with extreme high pressure peaks for use with hydraulic oils, both mineral and biological, polyglycol base oils, water-oil emulsions and water Hydraulic oils: -40 C to +121 C (-40 F to +250 F) PFR PFR / PFR1524* 1 1/ PFR1532* * Available upon request COMPATIBILITY CHART BETWEEN THIS HOSE AND APPROVED FITTINGS PFR Piece No-skive: J series 0.929" 1.008" 1.276" 1.398" 1.646" No-skive: H series 2.244" No-skive: HLZ series Plexagon, LLC. All rights are reserved P I
11 Plexagon, LLC P.O. Box 7709 Fort Worth, Texas P I F I All orders can go to: Orders@plexagon.com For more information on where to buy and how to become a Plexagon distributor us at: Info@Plexagon.com I Plexagon, LLC. All rights are reserved - 11
HYDRAULIC HOSES PLEXAGON I com. Plexagon, LLC. Catalog - December 18th, 2013
HYDRAULIC HOSES Plexagon, LLC Catalog - December 18th, 2013 The data reported in this catalog are not binding. Plexagon reserves the right to change specifications without notice. 817.231.5034 I www.plexagon.
FAX: HYDRAULIC HOSE FITTINGS AND ADAPTERS
C1T 1-Wire Braid Hose SAE 100R1 Type AT Recommended for: Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100R1AT and performance requirements of DIN 20022 1SN. Tube: Black, oil-resistant
GS-HYDRO INTERTRACO HOSES & CARBON STEEL COUPLINGS
GS-HYDRO INTERTRACO HOSES & CARBON STEEL COUPLINGS PRODUCT CATALOGUE INTERTRACO HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings
HYDRAULIC HOSES. FlexIT 018
HYDRAULIC HOSES FlexIT 018 HYDRAULIC HOSES Flexit 018 Intertraco (Italia) S.p.A. Flexible Hoses Catalogue - GSIHFX180 - March 2018 The data reported in this catalogue are not binding. Intertraco (Italia)
HYDRAULIC HOSES. Europe 018
HYDRAULIC HOSES Europe 018 HYDRAULIC HOSES Europe 018 Intertraco (Italia) S.p.A. Flexible Hoses Catalogue Europe 018 - GSIHEU180 - March 2018 The data reported in this catalogue are not binding. Intertraco
O BRIEN BRASS COMPANY
O BRIEN BRASS COMPANY Table of Contents Quality................................2 Threads...............................3 Hose & Coupling Compatibility.............4 SAE 100R1, SAE 100R2...................5
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
B R E N N A N c a t a l o g
B R E N N A N c a t a l o g $ 15 00 Dear Valued Customer: We are pleased to present our hydraulic tube fitting and adapter catalog. Since 1953, Brennan Industries, Inc. has been supplying hydraulic tube
J-FLEX HYDRAULIC HOSE SOLUTIONS
Your Hose & Fitting Connection J-FLEX HYDRAULIC HOSE SOLUTIONS ww.jgbhose.com JGB Headquarters 115 Metropolitan Dr. Liverpool, NY 13088 (315) 451-2770 Buffalo Branch 2540 Walden Ave. Cheektowaga, NY 14225
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings which includes BSP, NPT, JIC, Metric, SAE 3000/6000 Flanges and
28.0 MPa (4000 PSI) 3/8 (9.5 mm) ISO R19 Flame Resistant MSHA 2G-11C
M4KH megasys 6M4KH 28.0 MPa (4000 PSI) 3/8 (9.5 mm) ISO 11237 R19 Flame Resistant MSHA 2G-11C -4 6 1/4 0.54 13.7 4000 28.0 16000 112.0 50 33 4m4Kh -6 10 3/8 0.69 17.5 4000 28.0 16000 112.0 65 46 6m4Kh
INTRODUCTION OF KOMAN
H Y D R A U L I C INTRODUCTION OF KOMAN KOMAN HYDRAULIC 02 03 시대는변해도, 기업환경은달라도 NO.1 비즈니스파트너, Koman 입니다 코만은 1981년회사설립이래, 오랫동안축척된기술과신뢰를바탕으로, 정밀한품질관리체제에서유압용호스및호스피팅과어댑터를 SAE, DIN, JIC 및 JIS 등의국제규격을통해생산하고있으며,
-06 2, , , , , , , , ,780 SAE 100R16 Type S -08 4, , ,390
Series 2SC-XD -04 6,530 2SC-XD / 2 SNK -06 5,585 Type 1SN -04 3,045 DIN EN 853 1SN -06 2,610-08 2,320-12 1,525-16 1,275 Braided 1-Wire 1SN is an Upgrade from SAE 100R1T Braided 2-Wire Extreme Flex - 1
Welcome to JDM Industrial Maintenance Inc.
Welcome to JDM Industrial Maintenance Inc. We are an experienced and innovative company which has been serving the City of Peterborough and the surrounding areas since 98. Our diverse skills and resources
Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
INTEGRATED FLUID POWER SOLUTIONS ENGINEERING AND TECHNICAL DATA
INTEGRATED FLUID POWER SOLUTIONS SELECTING THE CORRECT HOSE HYDRAULIC HOSE ASSEMBLY AND INDUSTRIAL HOSE SELECTION CRITERIA An effective way to remember hose selection criteria is to remember the word STAMP,
QUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
TABLE OF CONTENTS. Hydraulic Hose & Fittings Table of Contents (Continued)
TABLE OF CONTENTS Hydraulic Hose & Fittings Table of Contents (Continued) ITEM PAGE # Spring Guards Spring Guards...21 Plated Flat Armor Spring Guard Selection Chart...21 Hose Guards Plastic Protective
Hydraulic Hose & Coupling Mini-Catalog
Hydraulic Hose & Coupling Mini-Catalog The System Flextral offers a diversified line of SAE and ISO compliant hose and fitting products. Our extensive distributor network ensures product availability and
Eaton Weatherhead Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton Weatherhead Core Hydraulic Hose Products Brochure Success made simple. The new standard for hydraulic hose and fittings. Sometimes less is more. Focused products, smarter choices. Eaton is taking
33.0 MPa (4800 PSI) 3/8 (9.5 mm) ISO SC R16
CM2T iso 11237 2sc r16 CM2T06 MegaFlex 33.0 MPa (4800 PSI) 3/8 (9.5 mm) ISO 11237 2SC R16-4 6 1/4 0.55 14.1 5800 40.0 23200 160.0 50 31 cm2t04-5 8 5/16 0.61 15.5 5000 35.0 20000 140.0 55 35 cm2t05-6 10
Injectors-Chips-Clutches-Transmissions-Turbos-Engines-Fuel Systems
Swampʼs Diesel Performance Competition Parts For Your Diesel 304-A Sand Hill Rd. La Vergne, TN 37086 Tel 615-793-5573 or (866) 595-8724/ Fax 615-793-5572 Email: dave@swampsdiesel.com Regulated Fuel Return
INTEGRATED FLUID POWER SOLUTIONS THE WORLD OF COUPLINGS
INTEGRATED FLUID POWER SOLUTIONS THE WORLD OF COUPLINGS ilok COUPLING THE WORLD OF COUPLINGS MAXIMISES OPERATION UPTIME ilok is Gates answer to the traditional staple-lock coupling, specifically designed
$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
Engineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
Hose and Fitting Edition
and Fitting Edition www.dnpamericas.com Phone: 281-388-0253 Fax: 281-388-1902 1 Table of Contents Determining Size 3 Selection Table 4 1SC, 100R2AT 5 100R16, 100R17 6 Jackhose, 2SN 7 4SP, 4SH 8 100R13,
HYDRAULIC HOSE & FITTINGS TEXCELHYDRAULICS.COM TXHHF18.0
HYDRAULIC & FIINGS EXCELHYDRAULICS.COM XHHF18.0 Founded in 1981, excel offers a full line of industrial hose, fluid sealing products and hydraulic solutions. Backed by he excel Guarantee, excel has become
HOSES HOSES INFORMATION GENERAL. GS Hose Components, medium press Working pressure, Type Approvals 345 High Pressure Hoses: P1T, EN 853/G1
GENERAL HYDRAULIC PIPES 10-40 AR SAE 50 AR SAE 3000 PSI DIN 350-400 AR SCHEDULE SERIE SAE 3000 PSI Product Page Working pressure, Type Approvals 345 High Pressure s: P1T, EN 853/G1 348 C1TH, EN 853/G2
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
Eaton Spiral Hose and Hose Fittings 4S/6S and Product Positioning Eaton. All Rights Reserved..
Eaton Spiral Hose and Hose Fittings 4S/6S and Product Positioning. Product Portfolio Core Rubber Spiral Hydraulic Hose & Fittings High Temp Abrasion 4S/6S Low Temp 2 Simplification of the Eaton Spiral
Assembly and Supply of:
CATALOGUE Inflex Hydraulic Engines & Machinery Spare Parts Trdg llc P.O.Box 392755, Dubai - UAE, Tel: 04 3394677, Fax: 04 3394388 Email: info@inflexhydraulics.com, www.inflexhydraulics.com www.stainlesssteelhosesdubai.com
HYDRAULIC HOSES. FlexIT 015
HYDRAUIC HOSES 015 HYDRAUIC HOSES 015 Intertraco (Italia) S.p.A. lexible Hoses Catalogue - SIHX150 - April 2015 The data reported in this catalogue are not binding. Intertraco (Italia) S.p.A. reserves
HYDRAULICS OUTSTANDING FIRE RESISTANCE WITH SUPERIOR HYDRAULIC PERFORMANCE
HYDRAULICS OUTSTANDING FIRE RESISTANCE WITH SUPERIOR HYDRAULIC PERFORMANCE FIRE RATED PRODUCTS - THE MANULI ADVANTAGE Active safety systems are widely used in industrial environments to mitigate damage
Section 6. HYDRAULICS HYDRAULICS Section 6. Section 6.1 Breather Plugs... 3 Bulk Hydraulic Hose... 5 Clevis Pins... 3
Section 6 Section 6.1 Breather Plugs... 3 Bulk Hydraulic Hose... 5 Clevis Pins... 3 Cylinders 6.2 Hydraulic Cylinder Seal Kits... 3 Hydraulic Toplink Cylinders... 3 Tie Rod Hydraulic Cylinders... 2 Section
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
Rail Hoses. The Hose Range for European Rail Transportation
Rail Hoses The Hose Range for European Rail Transportation INNOVATION AND COMPLIANCE Parker is a certified and well-experienced partner with a global presence for the leading players of the rail industry.
WATER CLEANING & BLASTING. ver_0001_05
WATER CLEANING & 1-1 www.manuli-hydraulics.com WATER INTRODUCTION The water cleaning hose range offered by Manuli can be applied to both hobby and professional water cleaning machines with both hot and
Hydraulic Hoses and Fittings
ydraulic s and Fittings owertrack nternational, nc. was founded in 1974 and has been supplying industrial hose and fitting products for over 35 years. owertrack s continued success directly correlates
Caterpillar Fluid Systems Srl HYDRAULIC HOSE & COUPLINGS
Caterpillar Fluid Systems Srl HYDRAULIC HOSE & COUPLINGS FOR MORE THAN 85 YEARS, CATERPILLAR HAS BEEN MAKING SUSTAINABLE PROGRESS POSSIBLE AND DRIVING POSITIVE CHANGE ON EVERY CONTINENT. WITH 2011 SALES
Flexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake
INDEX Section Pages Hose Section 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Pages Section Pages Swivel Joints 229-244 Quick Disconnect Couplings 268-345 Flexmaster Joints 245-260 Access.,
82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
Balfit Hydraulic Hose Fittings
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover
SECTION 1 SAE100R1 Page 6 SAE100R2 Page 6 SAE100R2XP Page 7 SAE100R2GP Page 7 Quick Reference Taipan Hose Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover SAE100R2H
4S/6S Eaton s high performance spiral hose fitting design with DURA-SEAL technology
eroquip / Spiral ose Fittings / aton s high performance spiral hose fitting design with UR-SL technology Class 0 Cool-own leakage Superior corrosion resistance ose/fitting identification program aton's
Eaton Weatherhead Agriculture Parts Guide
Eaton Weatherhead Agriculture Parts Guide EATON WEATHERHEAD AGRICULTURE PARTS GUIDE This parts guide contains popular Eaton Weatherhead hoses, fittings, adapter and couplings important to your farm equipment
Hose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
Hose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
Crimp Specifications D100 D165 D205 HYDRAULA. Micrometer Setting. Hose I.D. Recommended Die Set Select the die for your crimper below
SAE 100R1AT Hydraulic (R1) D100 D165 D205 Braided s R1-04 0.57 (14.60 mm) D100-12MM D100-12MM D-12MM 2.60 R1-06 0.72 (18.41 mm) D100-16MM D100-16MM D-16MM 2.41 R1-08 0.84 (21.46 mm) D100-19MM D100-19MM
CONSTRUCTION TUBE Oil resistant synthetic rubber. REINFORCEMENT One high tensile steel wire braid
RUBBER HOSES R1 (MEETS / EXCEEDS THE REQUIREMENTS OF EN 853, ISO 1436 & SAE 100R1AT) CONSTRUCTION TUBE Oil resistant synthetic rubber REINFORCEMENT One high tensile steel wire braid COVER Abrasion, ozone
BRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Fluid Power Solutions E715 V5 (8/17)
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fluid Power Solutions E715 V5 (8/17) LAWSON PRODUCTS' FLUID POWER SOLUTIONS Hydraulic Hose Systems Cut Your Hose Costs 50% by Making
KOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
ISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
HOSES HOSES SAE 6000 PSI INFORMATION GENERAL Oil Hose, 6008 PVC 385 P-Serie Couplings: Ferrules
GENERAL SAE 6000 PSI Product Page Product Page HYDRAULIC PIPES 10-40 AR SAE 50 AR SAE 3000 PSI SAE 6000 PSI DIN 350-400 AR SCHEDULE SERIE SAE 3000 PSI 1 Working pressure, Type Approvals 361 High Pressure
Hydraulic Hose. Braided - Multi-spiral - Powerwash - Thermoplastic - PTFE Ranges from 3/16 to 2
Hydraulic Hose Braided - Multi-spiral - Powerwash - Thermoplastic - PTFE Ranges from 3/16 to 2 HYDRAULIC HOSE 1SN Reinforcement: Onehigh tensile steel wire braid Cover: Abrasion, ozone & weather resistant
BEND RADIUS Standard SAE 100R
ALFABIOTECH alfa Specially designed for Bio oil full compatibility Alfabio hoses are designed to be used with biodegradable hydraulic fluids, thanks to the use of an oil resistant synthetic rubber which
WATER CLEANING & BLASTING
WATER CLEANING & BLASTING PRODUCT CATALOGUE 2016/2017 WE KEEP IT RUNNING HOSES SUMMARY WATER CLEANING & BLASTING HOSE RANGE The water cleaning hose range is dedicated to hobby and professional water cleaning
Hydraulics 101. Introduction to Hydraulics
Hydraulics 101 Introduction to Hydraulics Introduction to Hydraulics Table of Content The Principles of Hydraulics...Page 2 Where Hydraulic Hose Is Used...Page 5 Hydraulic Sales Opportunities...Page 8
Heavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
Tork-Mor Series Vane Style Hydraulic Rotary Actuators
Vane Style Hydraulic Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features...2 Ordering Information...3 Specifications...4 Dimensional Data...5 Mounting... 6-7 Shaft...7 Limit Switch Actuator...7
Eaton Aeroquip Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton Aeroquip Core Hydraulic Hose Products Brochure Success made simple. The new standard for hydraulic hose and fittings. Sometimes less is more. Fewer products, smarter choices. Eaton is taking a new
Rugby Manufacturing Direct Mount Unit Manual
Preface INSTALLATION & OPERATION MANUAL INTRODUCTION IMPORTANT!! Read this manual thoroughly prior to installation and operation. This manual outlines the installation and operation of a Direct Mount unit
Manifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
PRODUCT GUIDE FLUID CONNECTORS. COMPLETE HYDRAULIC SOLUTIONS February Sydney Emerald
COMPLETE HYDRAULIC SOLUTIONS February 2017 PRODUCT GUIDE FLUID CONNECTORS Adelaide 08 8228 2411 Brisbane 07 3375 4499 Sydney 02 9838 9033 Emerald 07 4988 1800 Newcastle 02 4964 2123 Mackay 07 4952 4056
Snow Blower Assembly Standard Flow Starting Serial Number to Current High Flow Starting Serial Number to Current
Snow Blower Assembly - 01-1500 Standard Flow Starting Serial Number 06337 to Current High Flow Starting Serial Number 11136 to Current Snow Blower Decal list Label Letter Description QTY. A Warning Do
GMT Hydraulic Transmission Drive Motor
GMT Hydraulic Transmission Drive Motor Ordering code: GMT 3-1250 -C - * - D31- * Blank=16 MPa. H= 20 MPa Distributor type: please refer to GM hydraulic motor. Blank= without brake. Z = with brake Shaft
Aeroquip BRUISER FC735 FC736 FC839B FC273B FC849B FC606B. Abrasion-Resistant Polymer-Covered Hose
Aeroquip BRUISER Abrasion-Resistant Polymer-Covered Hose FC735 FC736 FC839B FC273B FC849B FC606B FC735 BRUISER Double wire braid Exceeds DIN 20 0022 Type 2SN HI-IMPULSE at 1/2 SAE bend radius FC735-04*.25.57
SELECTION GUIDE.
SELECTION GUIDE SUR-FIT CORPORATION www.sur-fitusa.com O-RING FACE SEAL FITTINGS Standard J1453 published by the Society of Automotive Engineers (SAE). FS0304-C SERIES (520112) FS0306 SERIES (520118) FS0318
100R5. Features 100R5-style crimp fittings from Eaton complement the company s industryrecognized, reusable fitting line.
E R O Q U I P I N N O V T I O N S 100R5 CRIMP FITTINGS Features 100R5-style crimp fittings from Eaton complement the company s industryrecognized, reusable fitting line. eroquip 100R5 fittings are a low-cost,
HYDROBURST HB3038, HB5058, HB80, HB125
TM HYDROBURST HB3038, HB5058, HB80, HB125 Parts Manual HYDROBURST HB3038, HB5058, HB80 & HB125 s/n Part No. PM1251 INTRODUCTION HOW TO USE THE MANUAL This manual contains illustrations and parts list of
Hydraulic Intermot Transmission Drive
Hydraulic Intermot Transmission Drive Ordering code: IAMT 3 1500 F * D31 * Blank=16 MPa. H= 20 MPa Distributor type: please refer to Intermot IAM hydraulic motor. Blank= without brake. Z = with brake Shaft
Hydraulic Twin Tough 711 A TC A ST A TC A-14. 4,000 psi Constant W.P. 772TC A ST A A TC A-16
Constant Hydraulic Industry Standard Suction and Return Push-Lok Phosphate Ester Low Temperature Transportation lternative/marine Fuel Refrigerant Hose Hose visual index Constant Hose 451TC -10 451ST -10
Field Attachable Fittings
Field Attachable Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 DISCLAIMER Disclaimer The information and dimensions listed in these catalogues is correct to the
Thermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
Hydraulic & Pneumatic Hoses
s & Table of Contents Description Page Hydraulic Tutorial and... 3-5 Selection Guide... 6 Rated s PSI...7 Assembly & Nomenclature...8 B9 General Purpose Fuel Transfer...9 D6 Constant Hybrid 3000 PSI...9
OMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
quality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
While modern hydraulic hoses may have varying pressure ratings, temperature ranges and stock materials, all have similar construction features.
Introduction While modern hydraulic hoses may have varying pressure ratings, temperature ranges and stock materials, all have similar construction features. A hose consists of three basic components: The
Compression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS Series IG (manual version) - Quick connector for female threads and shaped elements - Working pressure: from 0 up to 350 bar IG-18-14 66 30 19 1/4"G
OIL & GAS DRILLING HOSE PRODUCTS
OIL & GAS DRILLING HOSE PRODUCTS Mud Pump - Frac - Oil Suction - Discharge - Steam - Vacuum - Jetting - Rotary - Kelly - Hydraulic - BOP - Grips - Hammer Unions - Couplings - Cam & Groove Contact Powertrack
Catalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage 8- Series For Pressures to 0 psi ( bar) 9 Series For Pressures to 0 psi ( bar) Featuring: Low pressure
Snow Blower Assembly Standard Flow to Serial Number High Flow to Serial Number 11135
Snow Blower Assembly - 01-1500 Standard Flow to Serial Number 06336 High Flow to Serial Number 11135 Snow Blower Decal list Label Letter Description QTY. A Warning Do Not Put Hands In 2 B Contact Information
MidCap Rotary Rake. Illustrated Parts Breakdown
MidCap Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Main Frame Transport Wheel Assembly Lift Arm Assembly Main
I N T R O D U C T I O N
RUBBER CATALOGUE I N T R O D U C T I O N Exitflex (UK) Ltd was established in 1985 as the first major European branch for EXITFLEX SA, the leading Swiss manufacturer of tungsten carbide spray tips, paint
MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING
MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
Accessories BSP BONDED SEALS
G11-N90 SAE FLANGE REPLACEMENT O-RINGS G11-N90-210 8 0.57 0.38 10 G11-N90-214 12 0.54 0.36 10 G11-N90-219 16 0.75 0.49 10 G11-N90-222 20 0.90 0.62 10 G11-N90-225 24 1.10 0.76 10 G11-N90-228 32 1.30 0.88
90 Dual Plane Swivels Switch Your Swivel!
90 Dual Plane Swivels Switch Your Swivel! HOW TO ODE STEM BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SEIES (THOUGH HOLE) THEAD SIZE MULTIPLES OF 100 FO N.P.T.F. MULTIPLES OF
HOSE & FITTINGS 2019 CATALOG
HOSE & FITTINGS 2019 CATALOG Headquartered in Muncie, Indiana, Muncie Power Products is a leading manufacturer and distributor of power take-offs and fluid power components for the work truck industry.
DISCLAIMER. COPYRIGHT 2010 by ATI Corporation 250 Earland Drive New Holland, PA U.S.A.
COPYRIGHT 2010 by 250 Earland Drive U.S.A. DISCLAIMER THE INFORMATION IN THIS MANUAL IS PROVIDED TO PROMOTE THE SAFE USE OF, AND ASSIST THE OPERATOR IN ACHIEVING THE BEST PERFORMANCE FROM, PARA-LEVEL GRADING
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Two powerful gearing solutions from Baldor. Now with greater availability.
Maxum XTR & MagnaGear XTR Stock Products Flyer Gearing Two powerful gearing solutions from Baldor. Now with greater availability. Maxum XTR and MagnaGear XTR gear reducers are now in stock. The same extra
Five Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system.
Five Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system. Five Hoses. Two Fittings. One Solution... Providing a simple solution of robust
Hydraulic Hoses, Fittings and Equipment
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic s, Fittings and Equipment s and Fittings The perfect range
Lime Spreader. Model SL6. Illustrated Parts Breakdown. Front Hydraulics Rear Hydraulics Manifold Components. Spinner Assembly
Lime Spreader Model SL Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Front Hydraulics Rear Hydraulics Manifold Components Floor & Apron Axle Assembly Apron Drive