Crimp Specifications D100 D165 D205 HYDRAULA. Micrometer Setting. Hose I.D. Recommended Die Set Select the die for your crimper below

Transcription

1 SAE 100R1AT Hydraulic (R1) D100 D165 D205 Braided s R (14.60 mm) D100-12MM D100-12MM D-12MM 2.60 R (18.41 mm) D100-16MM D100-16MM D-16MM 2.41 R (21.46 mm) D100-19MM D100-19MM D-19MM 2.46 R (25.27 mm) D100-22MM D100-22MM D-22MM / R " (27.90 mm) D100-25MM D100-25MM D-25MM 2.90 R " (36.30 mm) D100-35MM D100-35MM D-35MM R " (46.50 mm) N/A D100-43MM D-43MM 3.50 R (16.65 mm) D100-16MM D100-16MM D-16MM 0.65 R " (20.05 mm) D100-19MM D100-19MM D-19MM 1.05 R " (23.36 mm) D100-22MM D100-22MM D-22MM / R (30.86 mm) D100-28MM D100-28MM D-28MM 2.86 R (41.30 mm) D100-39MM D100-39MM D-39MM R (49.91 mm) N/A D100-47MM D-47MM 2.91 SAE 100R2AT Hydraulic (R2) D100 D165 D205 Braided s R (16.38 mm) D100-16MM D100-16MM D-16MM 0.38 R " (20.32 mm) D100-19MM D100-19MM D-19MM 1.32 R " (23.10 mm) D100-22MM D100-22MM D-22MM 1.10 R " (26.16 mm) D100-25MM D100-25MM D-25MM / R " (30.25 mm) D100-28MM D100-28MM D-28MM 2.25 R " (38.27 mm) D100-35MM D100-35MM D-35MM R " (48.46 mm) N/A D100-47MM D-47MM 1.46 R (17.65 mm) D100-16MM D100-16MM D-16MM 1.65 R (21.46 mm) D100-19MM D100-19MM D-19MM 2.48 R " (24.63 mm) D100-22MM D100-22MM D-22MM 2.63 R " (30.48 mm) D100-28MM D100-28MM D-28MM / R (32.65 mm) D100-31MM D100-31MM D-31MM 1.65 R (42.30 mm) D100-41MM D100-41MM D-41MM R " (52.32 mm) N/A D100-51MM D-51MM R " (60.95 mm) N/A N/A DDA-60MM* 0.95 R " (72.90 mm) N/A N/A DDA-72MM* 0.90 D100 D165 D205 See pg. 154 for our hydraulic hose crimpers. Page 196 Philadelphia: Mechanicsburg: Revised June 2016

2 SAE 100R3 General Purpose/Hydraulic (R3) D100 D165 D205 Braided R (15.60 mm) D100-14MM D100-14MM D-14MM 1.60 R " (20.05 mm) D100-19MM D100-19MM D-19MM 1.05 R " (24.15 mm) D100-22MM D100-22MM D-22MM / R " (31.50 mm) D100-31MM D100-31MM D-31MM 0.50 R " (36.60 mm) D100-35MM D100-35MM D-35MM 1.60 SAE 100R4 Suction and Return (R4) D100 D165 D205 Braided Two-Piece Suction 3/ R (31.30 mm) D100-31MM D100-31MM D-31MM 0.30 R (37.25 mm) D100-35MM D100-35MM D-35MM R " (45.20 mm) N/A D100-43MM D-43MM / R " (32.50 mm) D100-31MM D100-31MM D-31MM 1.50 R " (39.10 mm) D100-39MM D100-39MM D-39MM R (46.35 mm) N/A D100-43MM D-43MM R " (51.80 mm) N/A N/A D-51MM 0.80 R " (63.00 mm) N/A N/A DDA-62MM* 1.00 SAE 100R5 General Purpose/Truck (R5) D100 D165 D205 R5 Series Truck s 3/1 R (13.60 mm) D100-12MM D100-12MM D-12MM 1.60 R " (16.75 mm) D100-16MM D100-16MM D-16MM 0.75 R (18.40 mm) D100-16MM D100-16MM D-16MM /3 R " (21.10 mm) D100-19MM D100-19MM D-19MM 2.10 R (23.30 mm) D100-22MM D100-22MM D-22MM 1.30 R (26.30 mm) D100-25MM D100-25MM D-25MM /8" R " (31.50 mm) D100-29MM D100-29MM D-29MM /8" R (38.95 mm) D100-35MM D100-35MM D-35MM R " (43.95 mm) N/A D100-43MM D-43MM /1 R (56.50 mm) N/A N/A DDA-55MM* 1.50 SAE 100R7 Thermoplastic (R7BK/R7NC) D100 D165 D205 3 Series Thermoplastic s Braided 1/8" R " (09.10 mm) D100-08MM D100-08MM D-08MM /1 R " (12.14 mm) D100-10MM D100-10MM D-10MM 2.14 R (14.10 mm) D100-12MM D100-12MM D-12MM 2.10 R " (16.00 mm) D100-14MM D100-14MM D-14MM 2.00 R (17.15 mm) D100-16MM D100-16MM D-16MM 2.28 R (20.96 mm) D100-19MM D100-19MM D-19MM /1 R (12.57 mm) D100-10MM D100-10MM D-10MM 2.57 R " (14.73 mm) D100-12MM D100-12MM D-12MM 2.73 R " (16.00 mm) D100-14MM D100-14MM D-14MM 2.00 R " (18.28 mm) D100-16MM D100-16MM D-16MM 4.28 R " (21.59 mm) D100-19MM D100-19MM D-19MM / R " (28.44 mm) D100-28MM D100-28MM D-28MM 0.44 R " (35.56 mm) D100-35MM D100-35MM D-35MM 0.56 Revised June 2016 Philadelphia: Mechanicsburg: Page 197

3 SAE 100R8 Thermoplastic (R8BK/R8NC) D100 D165 D205 3/1 R " (12.14 mm) D100-10MM D100-10MM D-10MM Series Thermoplastic s R (14.10 mm) D100-12MM D100-12MM D-12MM 2.10 R " (16.00 mm) D100-14MM D100-14MM D-14MM 2.00 R (17.15 mm) D100-16MM D100-16MM D-16MM 1.15 R (20.96 mm) D100-19MM D100-19MM D-19MM /1 R (12.32 mm) D100-12MM D100-12MM D-12MM 0.32 Braided R " (14.73 mm) D100-12MM D100-12MM D-12MM 2.73 R (18.41 mm) D100-16MM D100-16MM D-16MM 2.41 R " (21.08 mm) D100-19MM D100-19MM D-19MM 2.08 Pressure Washer (PW/PWB) D100 D165 D205 Braided PW-04 PWB-04 PW-06 PWB " (14.22 mm) D100-14MM D100-14MM D-14MM " (19.05 mm) D100-16MM D100-16MM D-16MM 3.05 Braided Vs. W-Series Our braided hose fittings are made to interchange with most Weatherhead "U' series fittings, and attach by crimping to the outer rubber jacket of the hose. Our W-Series bite-to-the wire fittings are designed for superior performace by biting into the steel reinforced wire of the hydraulic hoses. Finished Braided Crimp : VGA Finished W-Series Crimp Remember to always measure your crimps! Page 198 Philadelphia: Mechanicsburg: Revised June 2016

4 SAE 100R12 Four-Wire Hydraulic (R12) D100 D165 D205 s R " (22.10 mm) D100-22MM D100-22MM D-22MM 0.10 R " (25.65 mm) D100-25MM D100-25MM D-25MM / R " (33.55 mm) D100-31MM D100-31MM D-31MM 2.55 R " (41.40 mm) D100-39MM D100-39MM D-39MM R (51.95 mm) N/A D100-51MM D-51MM R (60.35 mm) N/A N/A DDA-60MM* 0.35 R (73.30 mm) N/A N/A DDA-72MM* 1.30 SAE 100R13 Hydraulic (R13) D100 D165 D205 s JJ Series Skived skive before assembly, 3/ R (33.90 mm) D100-31MM D100-31MM D-31MM 2.90 R (41.80 mm) D100-39MM D100-39MM D-39MM R " (52.05 mm) N/A D100-51MM D-51MM R " (58.95 mm) N/A N/A DDA-58MM* 0.95 R " (75.70 mm) N/A N/A DDA-75MM* 0.70 SAE 100R14A PTFE (R14) D100 D165 D205 T Series PTFE s 3/1 R (10.05 mm) D100-10MM D100-10MM D-10MM 0.05 R " (10.90 mm) D100-10MM D100-10MM D-10MM 0.90 R " (12.45 mm) D100-12MM D100-12MM D-12MM 0.45 R (14.35 mm) D100-14MM D100-14MM D-14MM 0.35 R (17.65 mm) D100-16MM D100-16MM D-16MM / R (25.25 mm) D100-25MM D100-25MM D-25MM 0.25 R (31.10 mm) D100-31MM D100-31MM D-31MM 0.10 SAE 100R16 Hydraulic (R16) D100 D165 D205 Braided s R (15.60 mm) D100-14MM D100-14MM D-14MM 1.60 R " (18.79 mm) D100-16MM D100-16MM D-16MM 2.79 R " (21.84 mm) D100-19MM D100-19MM D-19MM 2.84 R " (25.40 mm) D100-25MM D100-25MM D-25MM / R " (28.70 mm) D100-28MM D100-28MM D-28MM 0.70 R (36.20 mm) D100-35MM D100-35MM D-35MM 1.20 R " (17.01 mm) D100-16MM D100-16MM D-16MM 1.01 R (20.70 mm) D100-19MM D100-19MM D-19MM 1.70 R (24.00 mm) D100-22MM D100-22MM D-22MM 2.00 R " (29.92 mm) D100-28MM D100-28MM D-28MM / R " (31.25 mm) D100-31MM D100-31MM D-31MM 0.25 R (39.50 mm) D100-37MM D100-37MM D-37MM 2.50 Revised June 2016 Philadelphia: Mechanicsburg: Page 199

5 SAE 100R17 Hydraulic (R17) D100 D165 D205 Braided s R (14.35 mm) D100-14MM D100-14MM D-14MM 0.35 R (17.90 mm) D100-16MM D100-16MM D-16MM 1.90 R " (21.35 mm) D100-19MM D100-19MM D-19MM 2.35 R (25.27 mm) D100-25MM D100-25MM D-25MM / R " (28.95 mm) D100-28MM D100-28MM D-28MM 0.95 R (15.90 mm) D100-14MM D100-14MM D-14MM 1.90 R " (19.80 mm) D100-19MM D100-19MM D-19MM 0.80 R " (24.10 mm) D100-22MM D100-22MM D-22MM 2.10 R " (29.70 mm) D100-28MM D100-28MM D-28MM / R (32.40 mm) D100-31MM D100-31MM D-31MM 1.40 R (39.75 mm) D100-37MM D100-37MM D-37MM 2.75 Hydraulax TOUGH Hydraulic (HT) D100 D165 D205 Braided s HT " (15.25 mm) D100-14MM D100-14MM D-14MM 1.25 HT " (19.05 mm) D100-16MM D100-16MM D-16MM 3.05 HT " (21.85 mm) D100-19MM D100-19MM D-19MM 2.85 HT (25.01 mm) D100-22MM D100-22MM D-22MM / HT (29.25 mm) D100-28MM D100-28MM D-28MM 1.25 HT " (16.75 mm) D100-16MM D100-16MM D-16MM 0.75 HT-06 0." (20.30 mm) D100-19MM D100-19MM D-19MM 1.30 HT " (24.15 mm) D100-22MM D100-22MM D-22MM 2.15 HT " (29.70 mm) D100-28MM D100-28MM D-28MM / HT " (31.50 mm) D100-31MM D100-31MM D-31MM 0.50 HT (39.25 mm) D100-37MM D100-37MM D-37MM 2.25 PSI Hydraulic Jack (HJK) D100 D165 D205 Braided HJK (16.10 mm) D100-14MM D100-14MM D-14MM 2.10 HJK (19.95 mm) D100-19MM D100-19MM D-19MM 0.95 EN 856 4SH Hydraulic (4SH) D100 D165 D205 s JJ Series Skived skive before assembly, 3/ 4SH " (33.55 mm) D100-31MM D100-31MM D-31MM SH " (41.40 mm) D100-39MM D100-39MM D-39MM SH " (50.55 mm) N/A D100-47MM D-47MM SH " (60.70 mm) N/A N/A DDA-60MM* SH (49.35 mm) N/A D100-47MM D-47MM SH (55.75 mm) N/A N/A DDA-55MM* SH " (72.15 mm) N/A N/A DDA-72MM* 0.15 Page Philadelphia: Mechanicsburg: Revised June 2016

6 SAE J2064 Type C Class II A/C Refrigerant Barrier (BH) D100 D165 D205 D100-16MM D100-16MM D-16MM 1.35 BH-06 13/3 BH (19.95 mm) D100-19MM D100-19MM D-19MM 0.95 BH (23.00 mm) D100-22MM D100-22MM D-22MM 1.00 BH " (26.65 mm) D100-25MM D100-25MM D-25MM 1.65 A/C Barrier 0.68 (17.35 mm) HOSE, TUBING AND ACCESSORIES HYDRAULIC (with petroleum or water-based fluids) R1 SAE 100R1 AT 1-Wire Hydraulic Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R1 AT specifications. HT GENERAL PURPOSE Tough-Cover Hydraulic 1145 Abrasion-, ozone- and weather-resistant cover is ideal for mobile hydraulics in harsh environments. TRUCK/FLEET Heavy-Duty Air Recommended for air and water applications where petroleum contact is limited. R ,750 1 HT ,525 26, " " 3¼" 3¼" 4½" / 1.00" " " 5¼" 5¾" 7¾" 8¾" 10½" 1 R1-06 R " R1-10 R1-12 3/ R , 9,000 7".9 1,500 6,000 8" 1.10" 1, 9½" HT-06 HT " HT-10 HT-12 3/ HT ,585 22, " ,205 16, " 4,060 16, " 2,900 11, " Use with Braided s or W-Series s. Use with Braided s, W-Series s, or SAE 100R1 AT Field-Attachable s. Use with Brass Barbs. Attach with hose clamps or ferrules. R2 SAE 100R2 AT 2-Wire Hydraulic Long-lasting cover is well suited for mobile hydraulics. Meets all SAE 100R2 AT specifications. 0.59" 5, psi 23, psi R " 4,785 psi 19,140 psi psi psi 7" R " 3,625 psi 14,500 psi 8" R2-12 3/ 1.1 3,120 psi 12,480 psi 9. R2-16 R " 2,395 psi 9,580 psi 1,815 psi 7,260 psi SAE 100R12 4-Wire Hydraulic R " 0.9 7" R12-12 R / 1.2 9½" ½" " R Use with W-Series s " 1,305 psi 5,220 psi 20" 2.6 1,160 psi 4,640 psi 2 at 70 Fahrenheit at 122 Fahrenheit K " K SAE 100R16 2-Wire Hydraulic Half-bend radius. Same pressure rating as SAE 100R2. R , psi 23, psi R " 4,780 psi 19,120 psi 2. R K ,980 psi 15,920 psi 3. 3,620 psi 14,480 psi R / 1.07" 3,110 psi 12,440 psi 4.7 R " 2,390 psi 9,560 psi SAE100R17 ConstantPressure Hydraulic Half-bend radius. All sizes are rated for psi maximum working pressure. Meets all SAE 100R17 specifications. R17-04* 0.50" " 1 1 4½" 5½" 6½" 7½" 9" 10½" 1,400 13¼" 4SH-12 3/ 1.2 6,095 24,380 9½" 4SH-20 4SH-24 4SH ,515 22, , 16, 20" 3,625 14, Use with Field-Attachable Air Brake s ½" 1.2 9½" " 1 3/ ¾" 3384 Push-Lock General Purpose " R " 1 Meets all requirements of SAE 30R7. 30R7 is not Coast Guard approved for marine applications. 3/ " 50 2¾" Recommended for steam, solvents, fuels, hydraulic fluids, most chemicals and acids Meets all SAE 100R14A specifications. R3 SAE 100R3 General Purpose 16½" 20" Meets all SAE 100R3 specifications " 0.7 1, 1,125 4,500 R R3-12 3/ R , 8" 30R " 50 2½" HJK " 1.2 Air Conditioning/ Refrigerant Meets all requirements for SAE J2064 Type C Class II. BH ¾" BH " Meets all SAE 100R6 specifications Use with Braided s. R " 400 1,600 2½" " R " 400 1,600 R ,600 5½" 103 1,750 6½" 61 Flange (6,000 psi) 61 Flange ( psi) 60 Elbow 61 Flange ( psi) 61 Flange ( psi) 62 Flange (6,000 psi) 62 Flange (6,000 psi) 22 Elbow FFX90 C6230 (W) C6245 (W) C6260 (W) C6290 (W) FBSPX (W) FBSPX45 (W) FJX FJXT Steel Wire Protective Coil HA Armor Protective Steel Coil HB.6.6 3/.89" 145 Fire Jacket Protective Sleeve for temperatures up to 500 F BE Standard Support Clamp for, Tubing or Pipe BE-H Heavy-Duty Support Clamp for, Tubing or Pipe BE-T 1.0 9" HT Series ISO Flush-Face Interchanges with Parker FEM Series (, and 3/) and FF Series ( only) Series Push-Lock Mender Wet Line Coupling FBSPX90 (W) FDL90 (W) 62 Flange (6,000 psi) FDH (W) (Metric) NPTF Rigid 90 (Metric) FFX (W) 62 Flange (6,000 psi) 60 Elbow FDH45 (W) 45 (Metric) FFX45 (W) 62 Flange (6,000 psi) FDH90 (W) FDL (W) 90 (Metric) (Metric) FFX90 (W) FFX90L (W) Nylon Air Brake Tubing Long Drop FSXT SAE 45 Long SAE 45 SAE 45 FSX90 FW Female Weld Fitting JIS 30 (BSPP thread) JIC 37 JIC 37 JIC 37 JIC 37 Long Drop Komatsu JIS 30 (Metric Thread) LF MB MBX MBX90 FP (W) FPX (W) FSX (W) FW (W) GT (W) MB (W) MBSPT MDH MDL MENDER MF MBX (W) MBX90 (W) MBSPP (W) MDH (W) MDL (W) MENDER (W) Medium Drop Inverted Flare Tube Nut (Brass) SAE 45 NPSM x NPSM Union Mender Elbow Mender Mender Tee Meets all requirements for SAE J844 Type A & B and DOT FMVSS NT100-02BK 1/8".02 Brass Ferrules.040".040" 287 SAE 45 / JIC 37 Dual Seat SAE 45 / JIC 37 Dual Seat SAE 45 Karcher Pressure Wash FSX45 Male FJISX (W) Male NPTF Rigid COV S Series Steel Strap with Protective Rubber Cover Full Flow In-Line s 9S Series Pressure Balanced 90 s 1,400 psi psi British Standard Pipe Taper (Metric) (Metric) Mender MIX45 MIX90 MP MPX Rigid MJ MMSP MPX90 MS JIC 37 Metric Stand Tube SAE psi 2- psi NPFT JIC BSPP JIC (Ballseat type) (Gasket type) 292 Inverted Flare Male Inverted Flare Female Series BSPP 90 BSPT 31469L Pipe 90 Long Tube Sleeve Inverted Flare Union Inverted Flare Plug Interchanges with Parker 6600 Series O-Ring Face Seal Male MMSP45 MF (W) Metric Stand Tube O-Ring Face Seal MT MPX (W) Male (includes nut and sleeve) JIC Cross JIC 37 Bulkhead Union with Locknut 2706LN S Series Tube Nut Nylon Tubing x NPTF Tube Nut Convert-A-Flare Tube Nut (JIC 37 to Flareless) Convert-A-Flare Tube Sleeve (JIC to Flareless) JIC Pipe Cap LN 2704LN 2705LN MTS JIC 37 Tube Nut (requires tube sleeve) JIC 37 Tube Sleeve (requires tube nut) 2404LL 2405 Long 1L 1LL 90 Double Long Elbow 90 Triple Long Elbow LN 2701LN 2702LN JIC 37 Bulkhead Union with Locknut JIC 37 Bulkhead Branch Tee with Locknut BT Long Elbow Extra Long 418 SAE 45 FJX90 (W) FJX90L (W) Female Weld Fitting Grease Trap Female FKOMX (W) Male NPTF x JIC Bulkhead with Locknut 1LLL JIC 37 Tee JIC 37 Tube Reducer/ Enlarger JIC 37 Tube Plug x Male NPTF Tee x Female NPTF Tee 1405 Female NPTF x Female NPSM Female NPSM Union L Female NPTF x Female NPSM 5406C 5406H Street Elbow 90 Elbow 45 Elbow Tee Teflon (PTFE) Thread Sealing Paste Teflon (PTFE) Thread Sealing Tape 90 Street Elbow Face Reducer Pipe Bushing Female NPSM Tee 5406P Coupling 90 Long Elbow 5407 Hex Head Pipe Plug Square Head Pipe Plug N 5405 Female NPTF x Female NPSM Female NPTF x Female NPSM 5406 Seamless Pipe Nipple Elbow 45 Elbow Street Tee Square Socket Pipe Plug Hex Socket Pipe Plug Increase/ Extension 1504 Hex Nipple 282 SAE 45 Male Locknut for Pipe SHELL Male MIX (W) MPX90 (W) (Metric) MIX45 (W) MT (W) Male (includes nut and sleeve) (Metric) MIX90 (W) Union NPTF Slotted Head Plug NPTF Square Head Plug Use with the following hydraulic hoses: Hydraulax HJK Jack, SAE 100R1AT,33220 SAE 100R2AT, Tough (HT), NPTF Hex HeadSAE Plug 100R3, NPTF Countersunk Female x NPTF Male NPTF Male x NPTF Female SAE 100R16,NPTF and SAE 100R Hex Head Plug Extender/Reducer Reducer Bushing Mender 5500 Hex Reducer Pipe Bushing Rigid Tube Shank (North American) Tee NPTF Coupling Hex Pipe Nipple R SAE M Rigid Tube Shank (Metric) 3384 Push-Lock Use with Push-Lock Barbs Seamless Pipe Nipple 45 Street Elbow R Street Tee Street Elbow 90 Elbow R JIC NPTF Tee 360 Female NPTF x Female JIC Interchanges with Parker 60 Series SAE 45 x Inverted Flare Adapter NPTF Cross Compression Tube Nut Compression Teflon (PTFE) Paste Thread Sealant Check Valve () Compression Union Tee HAPS (Plated) 4404 SAE 45 Flare JIC 37 TT R JIC 37 Teflon (PTFE) Thread Sealing Tape Compression Union 90 Inverted Flare Long Tube Nut Pipe HOSE ASSEMBLY TOOLS Pipe Pipe Bulkhead Pipe Nylon Tubing x NPTF Female x NPTF Male Tee Hydraulax s has a full selection of tools for crimping, swaging, and cutting hose Always measure your crimps Tee Pipe Nylon Tubing Tubing Insert Face Seal x BSPP Adj BSPP x BSPT British Pipe Nipple 9004 BSPP x Metric Series Thermoplastic s JIC 37 JIC 37 R2 Field-Attachable s are reusable and and can be assembled with hand tools (a hose crimper is not required) JIC BSPP x Female BSPP JIC 37 JIC 37 Long Drop A SAE 45 HES HRS Expander 374 Compression Bulkhead 4604 Reducer 376 NPTF Female x NPTF Male x Compression Tee Long Compression Nut 4503 (Beaded Barb) (Beaded Barb) SAE 45 Union Tee SAE 45 x SAE 45 x Inverted Flare Adapter SAE 45 Check Valve () SAE 45 x 45 SAE 45 Union 90 SAE 45 Cap SAE 45 Short Flare Nut HCPS TBC O-Ring Male Compression Repair Mender (Plated) Braze-On Mender BL-BR Series Push-In Female JIC x Female NPTF Adapter O-Ring Female BL-MOR Series BL-TFS Series T-Series s are interchangeable with Weatherhead E Series hose fittings. (Beaded Barb) 31154S S S Push-In x 45 Push-In Push-In x NPSM Female Pipe S S Push-In Tee Male Pipe Push-In 90 Male Pipe Male Pipe HOSE PROTECTION Push-In Bulkhead x NPTF T10 Truck Shut-Off Valve Drain Cock Ground Plug Drain Male JIC x O-Ring Port Adapter 6158 Face Seal x BSPP Adj Face Seal x BSPP Adj. T30 T BSPP x BSPP British Pipe Nipple 9006 JIC 37 x BSPP 9018 Metric x Female BSPP 9019 BSPP x Female Metric Straight Thread (ORB) x BSPP Face Seal x Metric 6902 x Female NPSM JIC 37 x BSPP JIC 37 Tube Sleeve for Metric Tubing Female NPTF x Male NPTF Cross Male NPTF x Male NPTF Female NPTF x Male NPTF 5501 Seal Nut for GOT STAINLESS? FS304C FS306 FS318 FS319 FS319R FS418 FS419 FS719 FS4000 FS2403 FS2404 FS2406 FS2408 FS0 FS1 FS3 FS2601 FS2603 Face Seal Cap Face Seal Bulkhead Locknut x JIC Union Female x Male NPTF 6801L Male JIC x Adjustable Union x Female NPTF 6801LL Male JIC x 90 Long Elbow 6802 Male JIC x 90 Extra Long Elbow 6807 x Male NPTF 6803 Male JIC x Face Seal Tube Sleeve (Braze) Face Seal Tube Sleeve Reducer (Braze) Face Seal Tube Nut (No-Braze) Face Seal Tube Sleeve (No-Braze) Face Seal No-Braze Ferrule Face Seal O-Ring Face Seal JIC 37 x 6168 Face Seal x Metric Adj Face Seal x Metric Adj BSPP x Female SAE 37 (JIC) BSPT x Female BSPP 6900 x Female x Female NPSM Face Seal x Male NPTF Face Seal Nut Reducer FS2650 FS2700LN FS6402 FS6403 Face Seal Union Cross Face Seal x Female JIC Face Seal x Metric Light Dual Purpose (Port/Tube) 6606 Face Seal x Metric Heavy Dual Purpose (Port/Tube) 9001 with Locknut Face Seal Plug FS2701LN with Locknut FS6412 Face Seal Union FS2702LN with Locknut FS6500 Face Seal x Male NPTF FS2703LN with Locknut FS6502 Face Seal x Male NPTF FS2704LN Face Seal x Male NPTF FS6400 Face Seal Union Tee FS6400L with Locknut Face Seal x Face Seal x Long FS6504 FS6590 FS6600 Face Seal x Male JIC Face Seal x Face Seal Nut Face Seal Nut Face Seal Nut x Male JIC FS6801 FS6802 FS6803 FS6804 FS6809 Face Seal x Male JIC Face Seal Nut 9004 Metric x Metric BSPP x Metric FS Metric x Female BSPP 2 LOCATIONS TO SERVE YOU 9022 BSPP x Female Metric 9024 JIC 37 x Female Metric Metric x Female JIC A Metric Countersunk Sealed Plug Metric Countersunk Plug (No Seal) PHILADELPHIA Four-Bolt Flanges x Female BSPP M Female BSPP Union 9066 Female Metric Coupling 61SF 61SF-KIT Split Flange Half 9032S 6605 Face Seal x Metric Adj. Buna O-Ring for Straight Thread 9018 BSPP x JIC 37 x Metric 62SF 61 Split Flange Kit JIC 37 x Metric 62SF-KIT 62 Split Flange Half BSPP Cap 9 BSPP x Female BSPT Extended Bushing JIC 37 x Metric Standpipe Male JIC x 62 Flange 45 Forged Elbow 3-Series s are interchangeable with Synflex 3903 Series hose fittings. 9201L 9201LL Metric Tube Nut (Light Series) Male JIC x 61 Flange FS1703 Face Seal x 61 Flange W46 W48 FS Long Face Seal Nut Face Seal x Face Seal x Face Seal x Face Seal x Face Seal Nut x FS7504 Face Seal x Face Seal Nut Adapter 9030M Metric Hex Head Plug 9202LL Metric Tube Cutting Ring (Extra Light Series) Face Seal x 61 Flange Male JIC9605 x 62 Flange 9635 FS1 Dual Purpose (Port FS3orMetric FS4 Tube) x NPTF Female Face Seal x 62 Flange Face Seal x 62 Flange 9203L Face Seal x 62 Flange 1 Male JIC x 62 Flange Forged Tube Cap 27165A x Male NPTF Flareless Tube Nut JIC x Flareless Tube Plug Large Hex x Bulkhead Union JIC x Flareless Bulkhead Flareless x Male NPTF x Flareless x Flareless Bulkhead Union TBC (use with Tube Sleeve) Flareless Tube Sleeve Reducer (use with Tube Nut) x Female NPTF 9203S Metric Tube Plug (Light Series) Metric Tube Plug (Heavy Series) Male JIC x Flange 9169 Male JIC x 61 Flange 90 Forged Elbow Male JIC x 61 Flange 45 Forged Elbow 9202 Metric Tube Cutting Ring xbent Brazed JIC x Metric Dual Purpose Metric NPTFTube FemaleElbow Pipe NPTF Male 90 Pipe Bent Tube Elbow Metric x Female Straight x Female Metric Thread (ORB) Light (Port or Tube) (Heavy Series) Face Seal x 61 Flange 9069L Male JIC x 61 Flange Forged Metric Tube Nut (Heavy Series) 6145 Male 9204S JIC x 61 Flange Brazed Metric Tube Cap (Light Series) 9201S Metric Tube Nut (Extra Light Series) 6100 Male JIC x 62 Flange 9204L 90 Forged Elbow Metric Tube Cap Split Flange Kit Rigid BSPT x Female BSP Solid 6815 x Female JIC MECHANICSBURG Male Elbow 4000 x Female NPSM 9007 T18 T26 JIC 37 /SAE 45 Dual Seat T19 T20 T08 T27 T01 T04 JIC 37 /SAE 45 Dual Seat 90 Long Elbow Rigid Female x 61 JIC 37 W W304 Equipment W600 W604 Specialty Mobile Female x 62 Male JIC x 61 T32 T33 90 Long Elbow T07 SAE Male JIC x 62 Flange Male JIC x 62 Flange Bent Tube Elbow 90 Dual BentPurpose Tube Elbow JIC x Metric x Long Heavy (Port or Tube) W43 Female NPTF x 61 W44 Female NPTF x 62 Flareless x Male NPTF Flareless x Female NPTF Union Flareless x Male NPTF Flareless x Female NPTF Union Tee T23 British StandardTOOLS Pipe Taper (BSPT) HOSE ASSEMBLY T 9030TCSP 9031 British Pipe Nipple (BSPP x BSPT) BSPT x Female BSPP BSPT x British Pipe Nipple (BSPT x BSPT) BSPT Hex Head Plug BSPP x Female BSPT BSPT x NPTF 9164 Digital Caliper VGA JIS 30 x BSPT JIS 30 x BSPT BSPT Countersunk Hex Plug BSPT x Female BSPT Reducer Bushing BSPT x Female BSPP Extended Bushing Permanently-attached hose fittings must be crimped to manufacturer specifications. For complete crimp specification data, please see our catalog or visit JIC 37 x Female BSPP Flat-Face (HIAB) 9245 JIC 37 x Komatsu 9247 JIC 37 x Japan Steel Works (JSW) AG Series JIC 37 x Kobelco 4100 Series ISO 5675 Agricultural Interchange 610 Face Seal x JIC 37 x Female Komatsu 9248 Kobelco Tube Plug Flareless x Buna O-Ring for Flange ( 61 or 62) 9231 Komatsu Hex Head Plug 9232 Flareless x Male NPTF Flareless x Female NPTF Bulkhead Locknut Union Cross Komatsu x BSPT Beaded Barbs Kobelco Tube Cap Series ISO Series A Flareless x 9233 Komatsu Cap Series Wet Line Coupling Barb x Male NPTF ISO Series B 4501 Barb x Male NPTF 4503 Barb x Male NPTF 4504 Barb Mender Tee 4601 Barb x 4603 Barb x Barb x T-Bolt Clamp 9392 Komatsu x Female Komatsu SAE 45 Always measure your crimps 9032S Male JIC x Face Seal x Kobelco 9237 Komatsu x Komatsu Komatsu x Female Komatsu Hydraulax s has a full selection of tools for crimping, swaging, and cutting hose Face Seal x Komatsu 9236 Mechanicsburg: Basehore Rd, Mechanicsburg, PA Face Seal x 61 Komatsu, Kobelco, and JSW (Japan Steel Works) Hydraulic Quick Disconnects Interchanges with Parker FEM Series Air Vent Cross Metric 9000 Face Seal x Female Komatsu 2 locations to serve you! Forged Brass Ball Valves to Pipe Needle Valves x Female NPTF 90 Extra Long Elbow 9391 Philadelphia: Tulip St, Philadelphia PA SAE 45 x SAE 45 Shut-Off Valve Drains (Internal and External Seats) Face Seal x BSPP Adj. HT Series Push-In Y Union NPTF Male x NPTF Female Mini Ball Valve Male NPTF Double Female NPTF Male x NPTF Marine Type Shut-Off 3-Way and 4-Way Shut-Off Valve Shut-Off Valve Female Shut-Off Valve Valve Hydraulax s Printed in the U.S.A. Shut-Off Valves 6801 x Male NPTF Reducer/Expander 6805LL 6230 T25 JIC 37 /SAE 45 Dual Seat Push-In Y Connector x We carry many products to extend the service life of your hydraulic hoses, such as Nylon Protective Sleeving (NPS), Steel and Plastic Guard, and more. Assorted Valves and Drains NPTF Female Mini Ball Valve 6059 Push-In Bulkhead Female x NPTF Male Tee 6410 Hex Socket Plug x Female NPTF ISO Flushface Interchange 90 Male Pipe Male JIC x Use with SAE 100R14A Teflon/PTFE s. JIC 37 BL-TMS Series Tee Heavy-Duty T-Bolt Clamp BL-MV Series Insert O-Ring BL-RM Series 6402 T-Series Teflon /PTFE s (Beaded Barb) 90 SAE 45 Tube Plug 6401 Male JIC x Long 6804 FS1700 Tubing Insert 4603 (Beaded Barb) L Use with all SAE 100R7 or SAE 100R8 Thermoplastic s VGA Digital Caliper Printed in the U.S.A. Face Seal x BSPP Long Plastic Plug Nylon Tubing x NPTF Male NPTF x Female JIC Female NPTF x Male NPTF Rigid 6901 JIC 37 x BSPP Long 90 Elbow R JIC 37 LCTS Beadlock A/C s Inverted Flare Union Tee Female JIC Union BRITISH & METRIC ADAPTERS Steel Barbs for SAE 100R4 Suction & Return Compression Tube Sleeve (Beaded Barb) ISO Series B Bent Tube Elbow Female NPTF x JIC 37 Bulkhead with Locknut MP (W) JIC 37 W-Series s feature performance at an affordable cost. 9002L Use with SAE 100R2AT hydraulic hose only JIC 37 Bulkhead with Locknut Straight Thread (ORB) Visit our website for crimp specifications www. hydraulax. com R2 Field-Attachable s Inverted Flare Union Full-time 360 rotating swivel joints for fluid power applications up to psi working pressure MJ (W) Face Seal x BSPP Braided s are interchangeable with Weatherhead U Series, Dayco-Eastman HY Series, Aeroquip FJ Series, Imperial-Eastman HU Series and Dayco SB Series hose fittings. Crimp Shell Only NPTF Cap NPTF Female x NPTF Male Pipe 45 JIC 37 Bulkhead Union with Locknut Many of the fittings shown here are also available in Type 316 Stainless Steel. (BSPP) T Pressure Balanced Parallel Plane s L 1 Pipe (NPTF & NPSM) 318 JIC 37 Bulkhead Locknut 2613 Male NPTF x Female JIC Brass Compression Permanently-attached hose fittings must be crimped to manufacturer specifications. For complete crimp specification data, please see our catalog or visit 31369L 90 Long FJX45 (W) JIC 37 x Female BSP Solid Garden Cap 700 Series BSPP ISO Series A Interchanges with Parker 0 Series and Enerpac C604 ( only) 2 9SS Series May also be used with HJK Jack, Hydraulax Tough (HT), as well as SAE 100R1AT, 100R2AT, 100R16 and 100R hoses. 6002L T Series Inverted Flare Tube Nut Dual-Plane 90 s FJX (W) psi / psi K11 General Purpose psi NT100-10BK NT100-12BK Screw-Together High Pressure Hex Head Plug Use with Brass Barbs NT100-06BK NT100-08BK NPFT 90 BSPP x Male JIC Tee Recommended for use with 4-wire SAE 100R12 and DIN 23 4SH hydraulic hoses. SAE 45 Long Flare Nut LH JIC 37 Flare Tube Cap Large Hex JIC 37 FFX90M (W) KAR MMSP90 Recommended for steam, solvents, fuels, hydraulic fluids, most chemicals and acids. Available in 9 colors shown 176 below C JIC 37 JIC 37 FDL45 (W) 45 (Metric) FSX Metric Stand Tube Push-Lock Barbs do not require clamps or Use with Air Brake or Push-In Air Brake. ferrules when used with Push-Lock Basehore Rd Mechanicsburg, PA Komatsu JIS 30 (Metric Thread) Inverted Flare Tube Sleeve 2 LOCATIONS TO SERVE YOU FP MBSPP North American Stand Tube NPSM x NPTF Adapter Interchanges with Parker 6100 Series Tulip St Philadelphia, PA Flange (6,000 psi) 30 Elbow FJX45 JIC 37 FKOMX GT Compression Air Brake Hydraulic Company, Inc. JIC 37 Long Brass Pipe 124 NT 271 Flexible Neoprene Protective Wrap Twin Support Clamp for, Tubing or Pipe FPX MW 172 JIC Fire Jacket FJX90M JIC 37 Medium Drop BRASS FITTINGS & ADAPTERS 7/8" Fluid Conducting Joints Protective Wrap for temperatures up to 500 F Long JIC 37 FJX90L JIC 37 Long Drop 8½" R14-16 R14-18 Push-Lock Barbs HHP112 -Bend Restrictors FJISX JIS 30 (BSPP thread) FJX90B JIC 37 Block Style HAS SG FFX90M Medium Drop Use with T-Series Teflon s or SAE 100R14A FieldAttachable s. NPTF Pressure Washer PW-06 JIC 37 Male AG Series Interchanges with Parker/Pioneer 4000 Series Nylon Protective Sleeve 90 (Metric) JIC 37 MIX 6½" 7½" Hydraulic Quick Disconnect Couplers ISO 5675 Agricultural NPS ,000 4, 104 Use with Braided s. 286 For additional hose information, including temperature range, outside diameter and reel lengths, please see our catalog or visit Protection and Support Clamps NFSGX C6222 (W) (Metric) FFX45 1 1,500 Use with SAE 100R6 Field-Attachable. Spiral Guard UV-Resistant Plastic Protective Coil C62 (W) 90 (Metric) FFXT 304 JIC 37 Long Flare Nut Wormgear 514 washer applications NT100-04BK Recommened for pressure AvailClamps Garden x NPTF Garden Male Garden Female (3/ Male, Female) able in Black (PW) and non-marking Blue cover (PWB) NT100-05BK PWB-06.38".4 13/3 Brass Barbs 13/3 BH-10 BH-12.30" R14-10 R14-12 Use with Air Conditioning s. SAE 45 SAE 100R6 General Purpose Recommended for gasoline, fuel, lubricating oils, air and water. Not approved for air brake applications. 2.07" " 3/1 R14-05 R14-06 R14-14 Recommended for use with R12 and R134a refrigerant. Ideal for heavy-duty truck use as well as industrial and automotive applications. PW R6 8" R14-04 BH 144 SAE 100R4 Suction and Return 3/ R4-24 R4-32 R4-16 R4-20 SAE 100R14A Teflon /PTFE R14 Use with Suction s or Steel Barbs. Attach barbs with Heavy Duty T-Bolt Clamps. C6190L (W) JIC 37 Short Flare Nut Male JIC x 30R7-03 Use with Braided s. C6190 (W) R7-05 R4 JIC 37 Flare Tube C6130 (W) 61 Flange ( psi) 30 Elbow 45 (Metric) 30R7-06 C6160 (W) C6122 (W) 61 Flange ( psi) 22 Elbow Face Seal Tube Nut (Braze) Recommended for low pressure / high temperature fuel for passenger car, light truck and small engine applications. Not intended for fuel injection applications. Use with SAE 30R7 Fuel Barbs. R " Suitable for vacuum service up to 2/hg. 2½" 1 7" R3-04 C6145 (W) C61 (W) 61 Flange ( psi) FFX 3,500 Meets all SAE 100R4 specifications. psi HJK Hydraulic Jack HJK R3-06 FDINLX CAT90 (W) Caterpillar Flange (Metric) Grease Trap Female Use with Braided s (up to 3/ hose ) or W-Series s (all sizes). *One-Wire spiral braid in sizes -04 and -06 Use only in constant pressure (no impulse) applications. R8-08 FDINHX90 CAT45 (W) Caterpillar Flange FDINLX90 SAE 100R8 Nylon/ Thermoplastic R8-04 R " FDINHX45 CAT (W) Caterpillar Flange STEEL FITTINGS & ADAPTERS W-Series s for 4-Wire Spiral s FBSPX45 Block Style 90 FFX90L Use with 3-Series Thermoplastic s or R7 Field-Attachable s. 1.0 FDINHX FBSPX FDINLX45 Long Drop Meets all SAE 100R8 specifications. Use with JJ-Series s (skiving is required). *Four-wire spiral braid in sizes -12 and -16 FBSPX90B British Flat Face 45 (Metric) Double-wire performance without the wire. Smooth cover. Recommended for hydraulic lines, lubrication, medium pressure gas and solvent. Available in black or nonconductive orange. 3/ R " 3.00" R , Recommended for hydraulics, fuel, lubricating oils, gasoline, air and water. Not approved for air brake. R , R ½" R17-10 R , R / " R " SAE 30R7 Fuel Line No hose clamps or ferrules needed when used with Push-Lock Barbs. R13-12* 1/8" 3/1 R7-06 R7-08 Recommended for air brake applications SAE 100R13 6-Wire Hydraulic Meets all SAE 100R13 specifications. R13-16* R7-02 R7-03 R7-04 R7-05 Meets all SAE J1402A and DOT specifications. Recommended for gasoline, fuel and lubricating oils, air and water. Available in black, blue, gray, red and yellow. 1 16½" Use with W-Series s (up to 1- hose ) or JJ-Series s (1- to hose ). FBFPX Use with 3-Series Thermoplastic s or R7 Field-Attachable s. SAE J1402A Air Brake 3/ Meets all DIN 23 4SH and DIN EN 856 4SH specifications. R13 R17-06* 7,000 6,000 K Long-lasting cover is well suited for mobile hydraulics. R17-08, and also available in a twin hose. Meets all SAE 100R7 specifications. 1 3, R7 Use with Braided s or W-Series s. R17 3½" 1,750 1, " K Six-wire performance with no-skive fittings. 4SH-16 Meets all SAE 100R16 specifications. R , " /8" 1 113/1 Use with Brass Barbs or Nylon Barbs. Attach with hose clamps or ferrules. DIN EN 856 4SH 4SH 4-Wire Hydraulic 2, /3 K K Use with Braided s, W-Series s, or SAE 100R2 AT Field-Attachable s. R " 0.67" 3/1 7/8" R5-20 R5-24 R5-32 C Flange ( psi) PVC Multipurpose Air and Water K11 Recommended for air, water, and mild water-soluble chemicals. Available in red, blue, gray and yellow. 1 R12-20 R R2-24 R2-32 R5-08 R5-12 R5-16 C Flange ( psi) SAE 100R7 Nylon/ Thermoplastic R7 R5-05 R Flange ( psi) Single-wire performance without the wire. Smooth cover. Recommended for hydraulic lines, lubrication, medium pressure gas and solvent. Available in black or nonconductive orange. R5-06 R5-04 C61 FJX90 Meets all SAE 100R12 specifications. R12-08 Braided s for 1-Wire and 2-Wire s FBSPX90 SAE 100R5 1-Wire Braided Cover Meets all applicable SAE 100R5, DOT and SAE J1402 specifications (7/8" and larger are not approved for air brake). Use with Truck s or R5 Field-Attachable s. Long-lasting cover is well suited for mobile hydraulics. R2-04 R2-08 R12 R5 Recommended for hydraulics, air, air brake, gasoline, fuel, and lubricating oils. SAE 100R5 is not Coast Guard approved for fuel lines on pleasure craft. HYDRAULIC HOSE FITTINGS SPECIAL APPLICATIONS JIS 30 x BSPT 9233 Komatsu 30 x BSPT 9536 Tube/Pipe BSPT x Female BSPP Bushing " " 1 5 8" 3 7 8" Interchanges with Parker 6100 Series Interchanges with Parker 4000 Series Pipe Thread (NPTF/NPSM) JIC 37 Flare FDINHX (ORB) FDINHX O-Ring Face Seal (OFS) FDINHX Female Interchanges with Parker 6600 Series Interchanges with Parker 60 Series Flareless Compression Fluid Conducting Joints 9SS Series Dual-Plane 90 s FDINLX FDINLX45 FDINLX90 MBSPT MDL MDH BSPT 45 9S Series Pressure Balanced 90 s Call us for tools, too! Tube cutters, hose saws, flaring tools and more 90 S Series Full Flow In-Line s 18S Series Pressure Balanced Parallel Plane s Braided s are interchangeable with Weatherhead U Series, Dayco-Eastman HY Series, Aeroquip FJ Series, Imperial-Eastman HU Series and Dayco SB Series hose fittings. BSPT x Female Straight Thread (ORB) Copyright 9 and 2014, Hydraulax s Inc. All rights reserved. Printed in the U.S.A. Use with the following hydraulic hoses: HT Tough Cover, HJK Jack, SAE 100R1AT, SAE 100R2AT, SAE 100R3, SAE 100R16, and SAE 100R Tube Union Union Tee Union 90 Also available, s for 4-wire spiral hoses. For use with Nylon Air Brake Tubing x x x 90 Angle Bib Drain 31869S x Gasoline Shut-Off Valve (with screen filter) NPTF Male x NPTF Female Needle Valve NPTF Double Female Needle Valve NPTF Double Male Needle Valve SAE 45 Double Male Needle Valve Male Needle Valve Male 90 Needle Valve x Japanese Industrial Standard (JIS 30 ) 6337 Face Seal x JIS x Male Pipe 31871S x Male Pipe x Male Pipe 31872S x Male Pipe Bulkhead x Male Pipe S x Male Pipe JIC 37 x Female JIS 30 JIS 30 Hex Head Plug JIS 30 Cap Nylon Air Brake Tubing PhiLadeLPhia Female JIC 37 x Female JIS 30 JIS 30 x BSPP Adj. JIS 30 x Straight Thread (ORB) JIS 30 x Straight Thread (ORB) Mechanicsburg Gladhand Couplings Coiled Air Brake Kit Coiled Air Assembly Blow Gun Pressure Gauges JIS 30 x BSPT Micro-Fog Lubricators Industrial Interchange Quick Disconnects ARO Speed Connect Couplers Bulkhead Coupling NPTF Male x NPTF Female Bulkhead Coupling NPTF Male x NPTF Dual (Male and Female) Bulkhead Coupling NPTF Female x NPTF Female JIC Male x NPTF Male Uses BSPP thread JIS 30 x BSPT Tube/Pipe Pipe Thread (NPTF/NPSM) JIC 37 Flare (ORB) 1 8" " 1 5 8" 3 7 8" JIC 37 x JIS Push-Lock Barbs need no clamps or ferrules when used with Push-Lock. JIS 30 x BSPT Seals, Sealing Seats, Etc MM Bonded Seal for Metric Thread (Buna) 9500-V Bonded Seal for BSPP (Viton Seal) 9777 Flat-Face BSPP (HIAB) 30 Sealing Seat 9999 JIS 30 Sealing Seat (converts BSPP to JIS 30 ) 9999 JIS 30 Sealing Seat (converts BSPP to JIS 30 ) JIC Male x NTPF Male JIS 30 x Female JIS 30 Bonded Seal for BSPP (Buna Seal) JIS 30 Regulators JIS 30 x Female JIS Air Line Filters Locations to serve You NT100 Available in 9 colors Miscellaneous Accessories O-Ring Face Seal (OFS) Flareless Compression LOCATIONS TO SERVE YOU 5606 Tulip St Philadelphia, PA Basehore Rd Mechanicsburg, PA BSPP/BSPT l.rh. DIN Light S.Rh. DIN Heavy Pipe Thread Male Thread O.D. Tube Thread Male Thread O.D. Tube Thread Male Thread O.D. 1/8" 3/ /8-28 1/4-19 3/8-19 1/2-14 5/8-14 3/ ¼-11 1½ /6 19/3 3/ 7/8" 1-1/ /3 1-7/8" 2-11/3 6 mm 8 mm 10 mm 12 mm 15 mm 18 mm 22 mm 28 mm 35 mm 42 mm L6 L8 L10 L12 L15 L18 L22 L28 L35 L42 M12x1.5 M14x1.5 M16x1.5 M18x1.5 M22x1.5 M26x1.5 M30x2.0 M36x2.0 M45x2.0 M52x mm 14 mm 16 mm 18 mm 15 mm 18 mm 22 mm 28 mm 35 mm 42 mm 6 mm 8 mm 10 mm 12 mm 14 mm 16 mm 20 mm 25 mm 30 mm 35 mm S6 S8 S10 S12 S14 S16 S20 S25 S30 S38 M14x1.5 M16x1.5 M18x1.5 M20x1.5 M22x1.5 M24x1.5 M30x2.0 M36x2.0 M42x2.0 M52x mm 16 mm 18 mm 20 mm 22 mm 24 mm 30 mm 36 mm 42 mm 52 mm Ask about our helpful and colorful wall charts for your shop or office! Dies can be found on page 154. Cutting Saws are located on page 153. Revised June 2016 Philadelphia: Mechanicsburg: Page 201

7 Chart - Hydraulic Quick Couplers The fractional (½", ¾", etc.) coupler sizes shown here are nominal only. To identify your existing hydraulic quick couplers, match the male coupler to one of the outlines show below. ISO HT Series Flush-Face Interchanges with: Faster FFI Series Holmbury A Series Parker FEM Series Snap-Tite 74 Series ISO 5675 AG Series Agricultural Interchanges with: Faster NS Series Parker/Pioneer 4000 Series Safeway S20 Series Tomco PC Series ISO Series A 600 Series Hydraulic Interchanges with: Aeroquip FD56 (5600) Series Faster ANV Series Hansen HA15000 Series Parker 6600 Series Safeway S56 Series ISO Series B 700 Series Hydraulic Interchanges with: Aeroquip FD45 Series Faster HNV Series Hansen HK Series Parker 60 Series Snap-Tite 72 Series Page 202 Philadelphia: Mechanicsburg: Revised June 2016

8 Fluid Port and Connector Thread s NATIONAL PIPE THREADS There are several variations of pipe threads. Thread forms include the Dryseal American Standard Taper Pipe Thread, the National Pipe Straight Threads for Mechanical Joints (NPSM) and the dryseal American Fuel Internal Straight Pipe Thread (NPSF). Each series is normally identified by the abbreviated letter designation. The NPTF thread is recommended for hydraulic service. This thread series is used on both male and female ends and forms a seal by the interference fit at the root and crest of the mating threads. The NPTF male also has an internal chamfer of 30 which allows it to seal at the seat with female NPSM pipe swivels. The NPSM is a straight pipe thread and sealing is obtained by the mating of the 30 seats of the male and female ends. FLARED TUBE FITTINGS SAE 37 Flare (JIC): The seal is obtained by the mating of two beveled metal surfaces. The function of the threads is simply to draw these two surfaces together. This style is used particularly in high pressure systems. As illustrated below, both the bevel on the male and the seat in the female are machined to 37. SAE 45 Flare: These flared tube fittings are similar to JIC, however the mating surfaces are machined at 45. These couplings are usually used for low pressure applications such as refrigerant and fuel lines in conjunction with copper tubing which flares easily to 45. O-RING CONNECTIONS SAE Straight Thread (): This fitting is a modification of the male JIC where the beveled 37 nose has been removed and a groove has been machined between the threads and the hex in which an O-ring is seated. The female is a port which has been tapped to the proper straight thread size and chamfered at the port face to provide an O-ring seat. The seal is made when the O-ring is trapped between port chamfer, thread under-cut, and the male fitting. : Uses an O-ring (SAE J515) in a groove on the male face side. This is mated to flat face with an O-ring on the female swivel side, forming a seal without metal deformation much the same as an SAE four bolt split flange connection without the bolts. The O-ring face seal connection has been tested to SAE J343 tests and procedures and meets or exceeds SAE J1453 specifications. This connector has proven its superiority in leak resistance, ease of installation, high operating pressure, increased torque tolerance and reusability with its ability to be connected and disconnected frequently. SAE J518 Four-Bolt Flange: Available in two pressure ratings. 61 is referred to as the standard series and 62 is the 6000 psi series. The design of both series is the same, but the bolt-hole and flange diameters are different. The female port is unthreaded. The male consists of a flanged head, grooved for an O-ring. The seal is made when the O-ring is compressed between the flange head and the surface surrounding the port. National Pipe Thread SAE 37 Flare (JIC) SAE 45 Flare (ORB) O-Ring Face Seal (ORFS) 61 Flange 62 Flange size usually refers to inside pipe diameter or outside tube diameter. With flanges, nominal size refers to port hole diameter. 1/8" / / / " 7/8" " " " " Revised June 2016 Philadelphia: Mechanicsburg: Page 203