Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
|
|
|
- Hester Newman
- 6 years ago
- Views:
Transcription
1 FITTINGS
2
3 Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %) C ( F) - Consult for temperatures higher than +80 C M5 1/8 1/4 3/8 1/2 1,6Nm 8Nm 12Nm 30Nm 35Nm DIN 3852, NF E49051, NF E48051 and JIS B2351 HR polymer (high chemical and impact resistant), brass collet gripping, stainless steel gripping washer (Ø8, 10 and 12 mm), NBR seals, nickel plated brass housing. All models are sillicon-free guaranted Instant Connection This technology allows easy and instant connection by hand, without the use of tools. Installation. Simply push the tubing until it can go no further. Connection and sealing is accomplished instantaneously.. To disconnect, push on the release button and pull out the tube.. To achieve a 90 straight cut of the tube, use the MICRO tube cutter. Advantages. Instantaneous connection and disconnection.. Full flow (no restriction to passage) as gripping and sealing is achieved using the outside diameter of the tube without deformation.. Immediate sealing by means of the O-ring seal and the optimised design of the tube.. Space saving installation: no access required for a tightening tool. Characteristics - For pneumatic installations - High Resistance Polymer - Designed for use with plastic tubing (PA, Polyurethane) - Light weight, compact and aesthetic Male stud fittings Male stud elbow ØG ØG M M G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 3/ G 3/ G 3/ G 1/ G 1/ M M G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 3/ G 3/ G 3/ G 1/ G 1/
4 Push - in fittings 431 Series Oscillating compact elbow ( ) Equal elbow ØG M G 1/ G 1/ G 1/ G 1/ G 3/ G 3/ Male stud branch Tee Equal Tee ØG M M G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 3/ G 3/ G 3/ G 1/ G 1/ Single Y piece Unequal multiple Y piece 2 x 1 1 x x 1 1 x
5 Push - in fittings 431 Series Plug-in single Y piece Plug-in multiple Y piece 2 x 1 1 x x Ø D1 1 x Ø D Male stud elbow (45 ) Multiple Tee, with fixing holes ØG 1 2 M M G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 3/ G 3/ G 3/ G 1/ Equal cross Unequal cross 3 x 1 1 x
6 Push - in fittings 431 Series Tube / tube connector Double male stem connector Reducer Increaser Bulkhead connector Blanking plugs
7 Push-in fittings 441 and 451 Series Type... Fluid... Working pressure... Max. inlet pressure... Rated temperature... Vacuum level... Connection threads... Torque (kgf.cm)... Materials... Push-in fittings, 441 series (G thread) and 451 series (BSPT thread) Compressed air - Water bar ( psi) 15 bar (21 psi) C ( F) - 1 bar (-14,5 psi) Cylindrical (G) or tapered (BSPT) M5 1/8 1/4 3/8 1/ Nickel plated brass and PBT resin bodies, stainless steel gripping washer, NBR seals, PTFE coating (in tapered threads) Male stud fittings (G thread) ØR x1 x10 x50 x100 M / / /100 M / / /100 M / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 3/ / / /100 G 3/ / / /100 G 3/ / / /100 G 1/ / / /100 G 1/ / / /100 Male stud elbow (G thread) ØR x1 x10 x50 x100 M / / /100 M / / /100 M / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 3/ / / /100 G 3/ / / /100 G 3/ / / /100 G 1/ / / /100 G 1/ / / /
8 Push-in fittings 441 and 451 Series Male stud branch Tee (G thread) ØR x1 x10 x50 x100 M / / /100 M / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 1/ / / /100 G 3/ / / /100 G 3/ / / /100 G 3/ / / /100 G 1/ / / /100 Male stud fittings (BSPT thread) ØR x1 x10 x50 x100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 3/ / / /100 R 3/ / / /100 R 3/ / / /100 R 1/ / / /100 Male stud elbow (BSPT thread) ØR x1 x10 x50 x100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 3/ / / /100 R 3/ / / /100 R 3/ / / /100 R 1/ / / /100 Male stud branch Tee (BSPT thread) ØR x1 x10 x50 x100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 1/ / / /100 R 3/ / / /100 R 3/ / / /100 R 3/ / / /
9 Push-in fittings 441 and 451 Series Tube / tube connector x1 x10 x50 x / / / / / / / / / / / / / / /100 Equal elbow x1 x10 x50 x / / / / / / / / / / / / / / /100 Equal Tee x1 x10 x50 x / / / / / / / / / / / / / / /100 Reducer 1 2 x1 x / / / / / / / /
10 Push-in fittings 441 and 451 Series Male stud elbow 45 (G thread) ØR x1 x10 G 1/ /010 G 1/ /010 G 1/ /010 G 1/ /010 G 1/ /010 G 1/ /010 G 3/ /010 G 3/ /010 G 1/ /010 Universal elbow (G thread) A female thread equal to the male thread is located in the upper side. ØR x1 x10 G 1/ /010 G 1/ /010 G 1/ /010 G 1/ /010 G 3/ /010 G 3/ /010 G 1/ /010 G 1/ /010 Equal cross x1 x / / /010 Double male stem connector x1 x / / / / /
11 Push-in fittings 441 and 451 Series Female Y connector (3 female ports) 1 (1x) 2 (2x) x1 x / / / / /010 Plug-in Y connector (2 female, 1 male ports) 1 (1x) 2 (2x) x1 x / /010 Multiple Tee connector 1 (2x) 2 (3x) x1 x / / / / /010 Bulkhead connector M x1 x10 4 M /010 6 M /010 8 M / M / M /
12 Push-in fittings 441 and 451 Series Non-return valve x1 x / / / / /
13 Connection accessories Accessories Reducer male to female Straight male adaptor ØC 1 ØC 2 ØC 1 ØC 2 Double female sleeve G 1/8 M G 1/4 M G 1/4 G 1/ G 3/8 G 1/ G 3/8 G 1/ G 1/2 G 1/ G 1/2 G 3/ G 3/4 G 1/ G 3/4 G 3/ G 3/4 G 1/ G 1/8 M G 1/8 G 1/ G 1/4 G 1/ G 1/4 G 1/ G 3/8 G 1/ G 3/8 G 1/ G 3/8 G 3/ G 1/2 G 1/ G 3/4 G 1/ G 3/4 G 3/ Internal hexagon headed plug ØC ØC M G 1/ G 1/ G 3/ G 1/ G 3/ M G 1/ G 1/ G 3/ G 1/ G 3/ Manifold block (Cross) Manifold block (bar) Teflon tape 4 x ØC M G 1/ G 1/ G 3/ G 1/ G 3/ x ØC 1 8 x ØC 2 G 1/4 M G 3/8 G 1/ G 1/2 G 1/ G 3/4 G 1/ Length Wide 10 m 12, mm
14 Tubes and hoses Standard tubing Polyurethane tubing (PU) The excellent flexibility of polyurethane tubing allows compact cabling where a small bend radius is required. According to NF E standard. The range comprises polyester polyurethane tubing, for superior chemical resistance and improved ageing, - High flexibility and small bend radius - Large range of working temperatures and pressures - Good chemical resistance (ask for list of fluids) - Small pressure drop - Constant rigidity, good ageing - Good absorption of vibration - UV resistant - 5 colours for easy circuit identification (mm) i (mm) Blue Red Green Yellow Black 4 2, , , Nylon tubing (PA12) Nylon tubing provides optimum mechanical properties, has good chemical resistance and conforms to NF E standard. (mm) i (mm) Natural Color - Large range of working temperatures and pressures - Good chemical resistance (ask for list of fluids) - Good humidity resistance - Small pressure drop - Constant rigidity, good ageing with constant tolerance on O.D. - Good absorption of vibration - Strong abrasion resistance 4 2,
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
Composite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
LF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Fittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
LF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
LIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
stainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
Prestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Super-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
FITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
in stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Pneumatic Connectors, Tubing & Cylinder Control Accessories
Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories
Valve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
Digital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
LIQUIfit Push-In Fittings
LIQUIfit Push-In Fittings This "eco-designed" range proposes an innovative alternative for water applications; no fluid contamination occurs and environmental protection is guaranteed. These fittings ensure
Hundreds of types of fittings
Push-to-Connect Hundreds of types of fittings can be used with plastic and rubber tubing and hose. Our goal at NewAge Industries is to offer a good cross-section of fittings to efficiently connect our
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.
Function Fittings Flow Control Regulators Piloted Function Fittings Non-Return Valves Pressure Fittings Other Function Fittings Silencers Function Fittings 4-3 Function Fittings Flow Control Regulators
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
INOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
SUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
Messing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
LIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.
LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,
Tubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel
Tubing & Hose Metric Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Available in a variety of different types to suit a wide range of applications
Local solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!
Local solutions for individual customers worldwide STAUFF UK PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES www.stauff.co.uk PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES Tube Connectors In Line Flow Control
atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
VISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
FLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
Pneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
83 series Brass compression fittings
> > Port size: Ø /8... 2, SPP and SPT thread > > For use in areas of vibration > > Pre-assembled units > > No special assembly tools or heat required > > an be remade without damage to tube Technical features
Cartridges and Customised Products
Cartridges and Customised Products 2-2 Cartridges and Customised Products 2-3 2-4 Cartridges Polymer Cartridges Compressed Air Fluids and Gases 3100 Carstick Page 2-8 3086 Quick Fitting Page 2-8 3089 Quick
Applicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
Stainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use
patented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
BRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
Specifications. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series RoHS Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing O.D.
Speed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
Connectors Content. Connectors at a glance Screw connectors and plug-in connectors - Standard
Connectors Content Connectors at a glance... 264 Screw connectors and plug-in connectors - Standard... 266 Screw connectors and plug-in connectors - self-extinguishing... 276 Screw connectors and plug-in
Quality Products at Competitive Prices awaits you with ATP! LIMITED WARRANTY
ATP has tested products from around the globe to find the highest quality, best valued push-to-connect fitting line to offer our customers for use with our USA manufactured Surethane polyurethane, Nylochem
Group 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
Transair. Specification Submittal
Specification Submittal About Parker: Transair is part of the Parker Hannifin Corporation (NYSE: PH), which was founded in 1918. With annual sales exceeding $13 billion, Parker Hannifin is the world s
82 series Brass compression fittings
> > Port size: Ø 6... 42 mm tube size, SPP and SPT thread > > Suitable for use on seam welded as well as seamless tube or pipe > > For use in areas of vibration > > Pre-assembled units > > No special assembly
LOC-LINE the original modular coolant hose system
endless solutions, flexibility & performance COOLANT CONTROL LOC-LINE the original modular coolant hose system 8 1 9 8 6 13 4 The combinations and flexibility offered by Loc-Line shows that whatever your
All offer prices are valid from 1st November until 30th November Prices exclude VAT. DON T MISS NOVEMBER S FANTASTIC OFFERS.
DON T MISS NOVEMBER S FANTASTIC S See pages 952-956 REINFORCED PVC BRAIDED HOSE FROM 5.94 Type RPVC (to BS6066) 1884 Heavy Duty, 30 Metre Coils Medium Duty, 30 Metre Coils 5000 5000 HDPVC14 6.5 1/4 11.5
Innovative Design Maximum Capability
Optimum Performance Innovative Design Maximum Capability www.liquifit.net 7205 East Hampton Avenue Mesa Arizona 85209-3301 Introducing From the Trusted Inventor of the Push-to-Connect Fitting With over
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
Table of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
EISELE LIQUIDLINE PROGRAM CONNECTIONS FOR COOLING WATER
PROGRAM CONNECTIONS FOR COOLING WATER QUALITY SOLUTIONS MADE BY EISELE LIQUID 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 3,500 standard articles,
One-touch Fittings 23% 24% 57% KQ2-G Series CAT.ES50-39A. 30% reduction. force 20% reduction 1. Stainless Steel. Improved tube insertion/removal
Stainless Steel One-touch Fittings etal material: Stainless steel 303 RoS Improved tube insertion/removal Insertion : force ax. 30% reduction ax. Removal : force 20% reduction : Tube removal strength is
Speed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
Multiple distributors QS, Quick Star
Multiple distributors QS, Quick Star Easy to insert Easy to release Up to 6 outlets 360 rotatable 2016/01 Subject to change Internet: www.festo.com/catalogue/... 1 Multiple distributors QS, Quick Star
COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED
Wade COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED DELTA FLUID PRODUCTS LTD Delta Fluid Products have been associated with the manufacturing of Valves and Fittings for Fluid and Gases for over
Compression Fittings & Valves. Make the connection
Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system
Everything from a single source for the ideal combination
Better connected Everything from a single source for the ideal combination Variety is standard at Festo Our range of tubing and fittings covers every conceivable task. Regardless of whether your selection
3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
Specifications Valve. Construction. Component Parts No. 1. Description. Body. Knob. Cover Cam ring Stem Spring guide Spring Seal O-ring Valve Cassette
Finger Valve Series VHK ohs Large effective area:.0 to 7.5 mm Small knob operating force: 0.04 to 0.4 N m Poppet valve construction seldom suffers seal defection. The series begins with the min. tubing
pneumatic function fittings
Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:
Multiple distributors QS
Multiple distributors QS Easy to insert Easy to release Up to 6 outlets 360 rotatable 2018/07 Subject to change Internet: www.festo.com/catalogue/... 1 Multiple distributors QS Key features Simply "plug
Self-closing/rotary push-in fittings QS
Self-closing/rotary push-in fittings QS Self-closing/rotary push-in fittings QS Key features Application Simply plug and work Reliably connected Captive seal Effortless selection of the right fitting.
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head Pt100 probe with compact KNS terminal head Class B, 4 wire connection Various probe available lengths
Push-in fittings and connectors QS, Quick Star
Push-in fittings and connectors QS, Quick Star Push-in fittings QS, Quick Star Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient
Push-in fittings and connectors QS, Quick Star
Push-in fittings and connectors QS, Quick Star Push-in fittings QS, Quick Star Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient
Pressure measurements can easily be taken any time, anywhere. POWER LIGHT
Compact Manometer Pressure measurements can easily be taken any time, anywhere. RoHS Compact and lightweight Portable type with a lightweight of only about 00 g (unit 50 g, battery 50 g) can also be held
Plug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
quality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
?????? Part No Part No. 20SF 30SF 40SF 20SM 30SM 40SM 20SH 30SH 40SH. Part No.
Jamec Pem 310 Series Couplers Single button operation. Will pass approximately 30cfm at 100psi. Jamec Pem 330 Series Adaptors?????? 13.0980 13.0985 13.0990 13.0950 13.0965 13.0970 13.0975 13.0930 13.0935
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Configurations: s.64. s.31. s.74 3 way. Flow: Mini 2 way Direct mount. Flow: Full. Flow: Standard 3 way. ISO 5211 F03 Flange
RUBINETTERIE UTENSILERIE BONOMI MEETING STANDARDS IS OUR STANDARD Configurations: 1 2 3 s.31 s.64 s.74 3 way Flow: Mini 2 way Direct mount Flow: Full 2 way ISO 5211 F03 Flange Flow: Standard 3 way ISO
Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
Fluid Power Products. Kaman Fluid Power is an authorized distributor of Parker Motion Products
Fluid Power Products Kaman Fluid Power is an authorized distributor of Parker Motion Products B.W. Rogers Calkins Fluid Power Catching FluidPower INRUMEC Northwest Hose & Fittings Western Fluid Components
Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
Speed Controller with One-touch Fitting
Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction
Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
Applicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
Miniature Fittings Stainless Steel 316. Hose nipple. Barb Configuration for easy insertion into the tube Holds the tube tightly.
Miniature Fittings Stainless Steel 316 Series MS Applicable Tubes: ø3.2, ø4, ø6 Connection Thread:, R 1/ For use in corrosive environments Compact piping space Tube has a large retaining force. Hose nipple