Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR

Size: px
Start display at page:

Download "Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR"

Transcription

1 A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required Easy to assemble Available with long or short nut in wide range of styles and sizes 651 1/8 O.D. TUBE P/N /16 O.D. TUBE P/N P/N /16 O.D. TUBE P/N P/N /16 O.D. TUBE P/N /8 O.D. TUBE P/N /16 O.D. TUBE P/N P/N /16 O.D. TUBE P/N P/N P/N NUT 1/8 O.D. TUBE P/N NUT 3/16 O.D. TUBE P/N NUT P/N NUT 5/16 O.D. TUBE P/N NUT P/N /16 O.D. TUBE P/N /8 O.D. TUBE P/N SLEEVE 1/8 O.D. TUBE P/N MMS LEVEL D SLEEVE 3/16 O.D. TUBE P/N SLEEVE P/N SLEEVE 5/16 O.D TUBE P/N SLEEVE P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX: P/N

2 A29-2 TM CIC 200 BRASS SAE 45 O FLARE FITTINGS ASSORTMENT P/N 7746 High pressure fuel, oil, air, water LP and natural gas applications Manufactured from virgin high density brass alloy Low cost, reusable Available with long or short nut and in wide range of styles and sizes 126 FE P/N P/N P/N LONG NUT P/N P/N FE 5/16 O.D. TUBE P/N /16 O.D. TUBE P/N /16 O.D. TUBE P/N LONG NUT 5/16 O.D. TUBE P/N /16 O.D. TUBE P/N FE P/N P/N P/N LONG NUT P/N P/N FE 3/16 O.D. TUBE P/N MMS LEVEL C 3/16 O.D. TUBE P/N /16 O.D. TUBE P/N LONG NUT 3/16 O.D. TUBE P/N /16 O.D. TUBE P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

3 A TM CIC 200 BRASS INVERTED FLARE TUBE FITTINGS ASSORTMENT High pressure air, oil, water, LP and natural gas applications Manufactured from virgin high density brass alloy Seats and threads are recessed and protected Use with copper, brass, aluminum and brazed steel hydraulic tubing can be flared P/N 7751 Shorter nut allows very close tube bends Reusable Temperature range: -65 o F to 250 o F Excellent vibration resistance INVERTED NUT 3/8 OD TUBE P/N /8 OD TUBE P/N /8 OD TUBE P/N O 3/8 OD TUBE P/N O 3/8 OD TUBE P/N PLUG 1/4 OD TUBE P/N INVERTED NUT 5/16 OD TUBE P/N /16 OD TUBE P/N /16 OD TUBE P/N O 5/16 OD TUBE P/N O 5/16 OD TUBE P/N PLUG 3/16 OD TUBE P/N INVERTED NUT 1/4 OD TUBE P/N /4 OD TUBE P/N /4 OD TUBE P/N O 1/4 OD TUBE P/N O 1/4 OD TUBE P/N LONG NUT STEEL 1/4 OD TUBE P/N INVERTED NUT 3/16 OD TUBE P/N MMS LEVEL B 45 O 90 O 3/16 OD TUBE 3/16 OD TUBE 3/16 OD TUBE LONG NUT STEEL 3/16 OD TUBE 3/16 OD TUBE P/N P/N P/N P/N P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

4 CIC 200 GREASE FITTINGS ASSORTMENT 300 A29-4 1/4-28 SHORT LENGTH 17/32 P/N / o LENGTH 47/64 P/N SHORT LENGTH 11/16 P/N /16 DRIVE-IN LENGTH 37/64 P/N /4-28 MEDIUM LENGTH 45/64 P/N /4-28 PLUG P/N LONG LENGTH 1-1/4 P/N Precision made, case hardened and cadium plated A convenient assortment of the most commonly used grease fittings )ICFAD 54701R )ICFAD 54702Y )ICFAD 54703V )ICFAD 54704S )ICFAD 54706W 1/4-28 LONG LENGTH 15/16 P/N /4-28 SELF-TAPPING LENGTH 17/32 P/N O LENGTH 1-1/16 P/N /4-28 X-LONG LENGTH 1-1/16 P/N / o SELF TAPPING LENGTH 7/8 P/N o LENGTH 27/32 P/N / o LENGTH 7/8 P/N )ICFAD 54708Q )ICFAD 54705Z )ICFAD 54709X )ICFAD 54710T )ICFAD 54711Q 1/ o SELF TAPPING LENGTH 47/64 P/N )ICFAD 54689S )ICFAD 54690Y )ICFAD 54691V )ICFAD 54692S )ICFAD 54693Z 90 o LENGTH 13/16 P/N )ICFAD 54717S )ICFAD 54720S )ICFAD 54718Z )ICFAD 54719W )ICFAD 54694W 3/16 DRIVE-IN 65 O 1/4 DRIVE-IN 5/16 DRIVE-IN 45 o LENGTH 49/64 LENGTH 39/64 LENGTH 9/16 LENGTH 1 P/N P/N P/N P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OH BUY-BOLT FAX: P/N 7750 )ICFAD 07750R

5 A29-5 TM CIC 200 BRASS PIPE FITTINGS ASSORTMENT P/N 7752 High pressure water, air, oil, LP and natural gas applications Manufactured from virgin high density brass alloy Positive mechanical seal Large range of styles and sizes 208 COUPLING P/N HEX HEAD PLUG P/N CLOSE NIPPLE P/N LONG NIPPLE x 2 P/N BUSHING 1/4- P/N COUPLING P/N HEX HEAD PLUG P/N CLOSE NIPPLE P/N LONG NIPPLE x 2 P/N BUSHING 3/8- P/N COUPLING 3/8 PIPE P/N HEX HEAD PLUG 3/8 PIPE P/N CLOSE NIPPLE 3/8 PIPE P/N LONG NIPPLE 3/8 PIPE x 2 P/N BUSHING 3/8- P/N DRAIN COCK P/N HEX NIPPLE P/N MMS LEVEL D HEX NIPPLE BUSHING BUSHING BUSHING DRAIN COCK 1/2-3/8 PIPE 1/2-1/2- P/N P/N P/N P/N P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

6 A29-6 TM CIC 200 NTA BRAKE FITTING ASSORTMENT (BRASS) P/N Meets all air brake specifications fully D.O.T. approved Utilizes ribbed sleeve for compression and positive grip Body (less insert) interchangeable with standard air brake compression bodies P/N P/N /2 O.D. TUBE P/N P/N P/N /2 O.D. TUBE 1/4 TUBE P/N TUBE INSERT P/N TUBE INSERT P/N TUBE INSERT 1/2 O.D. TUBE P/N TUBE INSERT 5/8 O.D. TUBE P/N /2 O.D. TUBE P/N SLEEVE P/N SLEEVE P/N SLEEVE 1/2 O.D. TUBE P/N SLEEVE 5/8 O.D. TUBE P/N P/N NUT P/N MMS LEVEL D NUT NUT NUT 1/2 O.D. TUBE 5/8 O.D. TUBE P/N P/N P/N P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

7 A29-7 TM CIC 200 POLY-TITE BRASS FITTINGS ASSORTMENT P/N 7754 For instrument, pneumatic, lubricant, fuel and coolant lines A preassembled, compact brass compression fitting designed for speed aand ease of use Use with polyethylene, polypropylene, vinyl, nylon, copper and aluminum tubing 434 SLEEVE 1/2 O.D. TUBE P/N NUT 1/2 O.D. TUBE P/N P/N P/N /8 PIPE P/N SLEEVE P/N NUT P/N P/N P/N /8 PIPE P/N P/N SLEEVE 5/16 O.D. TUBE P/N NUT 5/16 O.D. TUBE P/N /16 O.D. TUBE P/N TEE P/N P/N SLEEVE P/N MMS LEVEL D NUT TEE P/N P/N P/N P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

8 A TM CIC 200 VACUUM AND LOW PRESSURE LINE FITTINGS ASSORTMENT P/N 7731 Chemical resistant, high impact nylon connectors For all applications involving emission controls, shifting devices, windsheild washers, etc. on trucks, cars, forklifts and equipment 1/8 (ALL ENDS) STRAIGHT CONNECTOR P/N /8 (ALL ENDS) T CONNECTOR P/N /16 (ALL ENDS) Y CONNECTOR P/N /16 (ALL ENDS) FIVE WAY T CONNECTOR P/N /32-1/4-3/8 UNIVERSAL T CONNECTOR P/N /16 (ALL ENDS) STRAIGHT CONNECTOR P/N /16 (ALL ENDS) T CONNECTOR P/N /4 (ALL ENDS) Y CONNECTOR P/N /16 (ALL ENDS) X CONNECTOR P/N /4 (ALL ENDS) STRAIGHT CONNECTOR P/N /4 (ALL ENDS) T CONNECTOR P/N /16 (ALL ENDS) Y CONNECTOR P/N /16 RUBBER VACUUM LINE CAP P/N /32-1/4-3/8 UNIVERSAL STRAIGHT CONNECTOR P/N /16 (ALL ENDS) STRAIGHT CONNECTOR P/N MMS LEVEL B 5/16 (ALL ENDS) 3/16 (ALL ENDS) 1/4 T CONNECTOR FOUR WAY T CONNECTOR RUBBER VACUUM LINE CAP P/N P/N P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

9 56 )ICFAD 05572R )ICFAD 05581T INSTANT FITTINGS (DOT) ASSORTMENT The fastest connections for air, fuel, water and oil lines Automatic locking and sealing to maximum working pressure Unrestricted ID allows maximum fl ow )ICFAD 05588S )ICFAD 05670U One piece fi tting means reduced assembly time and fewer parts in inventory Fully reusable since there are no ferrules or inserts Broad selection of styles and sizes )ICFAD 05771Y P/N 7770 )ICFAD 07770Z )ICFAD 04737V P/N )ICFAD 05573Y 3/8 PIPE P/N )ICFAD 05582Q P/N )ICFAD 05589Z 360 SWIVEL ELBOW P/N )ICFAD 05687S P/N )ICFAD 05778X MALE BRANCH TEE 1/2 O.D. TUBE X 1/4 NPT P/N )ICFAD 04708V P/N /8 PIPE P/N )ICFAD 05574V )ICFAD 05579Q 1/2 PIPE P/N /2 O.D. TUBE 3/8 PIPE P/N )ICFAD 05584U )ICFAD 05586Y P/N P/N )ICFAD 05592Z )ICFAD 05669Y 360 SWIVEL ELBOW P/N SWIVEL ELBOW 3/8 PIPE P/N )ICFAD 05688Z )ICFAD 05689W P/N /2 O.D. TUBE P/N )ICFAD 05783R )ICFAD 04733X 1/2 O.D. TUBE P/N )ICFAD 05671R A29-9 P/N /2 O.D. TUBE 1/2 PIPE P/N SWIVEL ELBOW P/N SWIVEL ELBOW 1/2 O.D. TUBE 3/8 PIPE P/N MALE BRANCH TEE X 1/4 NPT P/N SWIVEL ELBOW 3/8 NPT P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OHIO FAX:

10 A29-10 CIC 200 1/8 1/4 INSTANT FITTINGS PRO ASSORTMENT I Pressure rating: from 27 Hg to 250 PSI Temperature range: -40 o F to 200 o F Use with polyethylene, nylon and polyurethane tubing The fastest connections for air, water and oil lines Instant pneumatic, hydraulic, instrumentation and lubrication connections Automatic locking and sealing to maximum working pressure Release collar for instant removal of tubing and line checks P/N /8-1/16 P/N O MALE SWIVEL ELBOW 1/8-1/8 P/N MALE SWIVEL BRANCH TEE 1/8-1/8 P/N FE 1/8-1/8 P/N TEE 1/8 P/N /8-1/8 P/N /8-1/8 P/N O MALE SWIVEL ELBOW 1/4-1/8 P/N MALE SWIVEL BRANCH TEE 1/4-1/4 P/N FE 1/8-1/8 P/N TEE 1/4 P/N /4-1/8 P/N /4-1/8 P/N O MALE SWIVEL ELBOW 1/4-1/4 P/N FE 1/4-1/4 P/N /8 P/N /4-1/4 P/N /4-1/4 P/N MALE SWIVEL RUN TEE 1/8-1/8 P/N MALE SWIVEL RUN TEE 1/4-1/4 P/N ELBOW 1/4 P/N /4 P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OH BUY-BOLT FAX:

11 A29-11 CIC 200 3/8 1/2 INSTANT FITTINGS PRO ASSORTMENT II The fastest connections for air, fuel, water and oil lines Instant pneumatic, hydraulic, instrumentation and lubrication connections Automatic locking and sealing to maximum working pressure Release collar for instant removal of tubing and line checks Pressure rating: from 27 Hg to 250 PSI Temperature range: -40 o F to 200 o F Use with polyethylene, nylon and poyurethane tubing P/N /8-1/4 P/N /2-1/2 P/N O MALE SWIVEL ELBOW 3/8-1/4 P/N MALE SWIVEL BRANCH TEE 3/8-1/4 P/N FE 3/8-1/4 P/N TEE 3/8 P/N /8-3/8 P/N /8-1/4 P/N O MALE SWIVEL ELBOW 1/2-3/8 P/N MALE SWIVEL BRANCH TEE 1/2-3/8 P/N FE 3/8-3/8 P/N TEE 1/2 P/N /8-1/2 P/N /8-3/8 P/N MALE SWIVEL RUN TEE 3/8-1/4 P/N ELBOW 3/8 P/N /8 P/N MALE SWIVEL RUN TEE ELBOW 1/2-3/8 1/2-3/8 1/2-3/8 1/2 1/2 P/N P/N P/N P/N P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OH BUY-BOLT FAX:

12 A29-12 HOSE BARB FITTINGS ASSORTMENT Made to dryseal standards and machined from CA360, CA345 or CA377 Brass Rod Temperature ranges from -40 o F to 160 o F Working pressure: 150 PSI maximum P/N /4 X 1/8 MALE P/N /8 X 1/4 MALE P/N /4 X 3/8 FEMALE P/N /4 X 1/8 MALE 90 o ELBOW P/N /8 X 3/8 MALE 90 o ELBOW P/N /8 Tee P/N /4 X 1/4 MALE P/N /8 X 3/8 MALE P/N /8 X 1/8 FEMALE P/N /4 X 1/4 MALE 90 o ELBOW P/N /4 X 1/8 MALE 45 o ELBOW P/N /4 ID BRASS HOSE MENDER P/N /4 X 3/8 MALE P/N /4 X 1/8 FEMALE P/N /8 X 1/4 FEMALE P/N /8 X 1/8 MALE 90 o ELBOW P/N /8 X 1/4 MALE 45 o ELBOW P/N /16 I.D. BRASS HOSE MENDER P/N /8 X 1/8 MALE P/N MMS LEVEL C 1/4 X 1/4 FEMALE P/N /8 X 3/8 FEMALE P/N /8 X 1/4 MALE 90 o ELBOW P/N /4 TEE P/N /8 I.D. BRASS HOSE MENDER P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

13 A GARDEN HOSE CAP P/N GARDEN HOSE PLASTIC WASHER P/N MALE GARDEN HOSE X 1/2 MALE PIPE P/N MALE GARDEN HOSE X 3/8 MALE PIPE P/N MALE GARDEN HOSE X 3/4 FEMALE PIPE P/N MALE GARDEN HOSE X 1/2 FEMALE PIPE P/N MALE GARDEN HOSE P/N MALE GARDEN HOSE X 3/4 HOSE BARB P/N GARDEN HOSE FITTINGS ASSORTMENT FEATURES Manufactured from CA360 or CA345 brass Working pressure: 75 PSI (or recommended working pressure of garden hose used - not to exceed 150 PSI) Temperature Range: -35 o F to 100 o F MALE GARDEN HOSE X 5/8 HOSE BARB P/N MALE GARDEN HOSE X 1/2 HOSE BARB P/N FEMALE SWIVEL GARDEN HOSE X 3/4 FEMALE PIPE P/N FEMALE SWIVEL GARDEN HOSE X 1/2 FEMALE PIPE P/N FEMALE SWIVEL GARDEN HOSE P/N Hose barb ends are intended for use with hose clamps All female connector ends should have a garden hose washer inserted prior to usage All garden hose ends are standard 3/4 garden hose thread )ICFAD 53280S )ICFAD 53285X )ICFAD 53290R )ICFAD 53295W GARDEN HOSE CAP WITH CHAIN P/N FEMALE GARDEN HOSE X 3/4 MALE PIPE P/N )ICFAD 53281Z )ICFAD 53286U )ICFAD 53291Y )ICFAD 53296T FEMALE GARDEN HOSE X 1/2 MALE PIPE P/N )ICFAD 53282W )ICFAD 53287R )ICFAD 53292V )ICFAD 53297Q MALE GARDEN HOSE X 3/4 MALE PIPE P/N FEMALE SWIVEL GARDEN HOSE X 3/4 HOSE BARB P/N )ICFAD 53283T )ICFAD 53288Y )ICFAD 53293S )ICFAD 53298X FEMALE SWIVEL GARDEN HOSE X 5/8 HOSE BARB P/N )ICFAD 53284Q )ICFAD 53289V )ICFAD 53294Z )ICFAD 53299U FEMALE SWIVEL GARDEN HOSE X 1/2 HOSE BARB P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OH BUY-BOLT FAX: P/N )ICFAD 17779Z

14 A29-14 BRASS PIPE FITTING ASSORTMENT High pressure water, air, oil, lp and natural gas applications Manufactured from virgin high density brass alloy Positive mechanical seal Large ranges of styles and sizes SPECIFICATIONS: Pressure: 1,200 psi operating. Proof pressure up to 15,000 psi for 1/8 and 1/4 pipe; 5,000 psi on larger sizes Temperature: -65 o F to +250 o F at 1,000 psi Vibration: Good resistance P/N Use with: Brass, copper or iron pipe Conformance: Meets specifications of SAE automotive pipe fitting standards Assembly Instructions: Tighten a minimum of 2-1/2 full turns past hand tight 60 1/8 Elbow P/N /4 Elbow P/N /8 Elbow P/N /2 Elbow P/N /8 45 o Elbow P/N /4 45 o Elbow P/N /8 45 o Elbow P/N /2 45 o Elbow P/N /8 Street Elbow P/N /4 Street Elbow P/N /8 Street Elbow P/N /2 Street Elbow P/N /8 45 o Street Elbow P/N /4 45 o Street Elbow P/N /8 45 o Street Elbow P/N /2 45 o Street Elbow P/N /8 Tee P/N MMS LEVEL D 1/4 Tee P/N /8 Tee P/N /2 Tee P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OH BUY-BOLT FAX:

15 A29-15 SPRING BRASS LOCKING TEETH BUNA N SEAL ALL BRASS BODY TUBING WIDE FLANGE RELEASE COLLAR METRIC INSTANT FITTINGS ASSORTMENT (4mm to 8mm) Easy one piece connection requires no tools or components to connect saves time and money Automatically locks and seals to the max. working pressure P/N Male pipe threads are precoated with liquid sealant for faster assembly Unrestricted tube I.D. allows for maximum airflow 31 4mm x 1/8 P/N mm x 1/4 P/N mm x 1/8 P/N mm x 1/4 P/N mm x 1/4 P/N mm x 3/8 P/N Swivel Elbow 4mm x 1/8 P/N Swivel Elbow 4mm x 1/4 P/N Swivel Elbow 6mm x 1/8 P/N Swivel Elbow 6mm x 1/4 P/N Swivel Elbow 8mm x 1/4 P/N Swivel Elbow 8mm x 3/8 P/N mm Union P/N mm Union P/N mm Union P/N mm Union Tee P/N mm Union Tee P/N mm Union Tee P/N Female Connector 4mm x 1/8 P/N MMS LEVEL D Female Connector 6mm x 1/8 P/N Female Connector 8mm x 1/4 P/N Swivel Branch Tee 4mm x 1/8 P/N Swivel Branch Tee 6mm x 1/4 P/N Swivel Branch Tee 8mm x 1/4 P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

16 A29-16 SPRING BRASS LOCKING TEETH BUNA N SEAL ALL BRASS BODY TUBING WIDE FLANGE RELEASE COLLAR METRIC INSTANT FITTINGS P/N ASSORTMENT (10mm to 12mm) Easy one piece connection requires no tools or components to connect saves time and money Automatically locks and seals to the max. working pressure Male pipe threads are precoated with liquid sealant for faster assembly Unrestricted tube I.D. allows for maximum airflow 24 10mm x 1/4 P/N mm x 3/8 P/N mm x 3/8 P/N mm x 1/2 P/N Swivel Elbow 10mm x 1/4 P/N Swivel Elbow 10mm x 3/8 P/N Swivel Elbow 12mm x 3/8 P/N Swivel Elbow 12mm x 1/2 P/N Male Swivel Run Tee 10mm x 1/4 P/N Male Swivel Run Tee 10mm x 3/8 P/N Male Swivel Run Tee 12mm x 3/8 P/N Male Swivel Run Tee 12mm x 1/2 P/N mm Union P/N mm Union P/N mm Union Elbow P/N mm Union Elbow P/N mm Union Tee P/N mm Union Tee P/N Female Connector 10mm x 3/8 P/N MMS LEVEL D Female Connector 12mm x 3/8 P/N Swivel Branch Tee 10mm x 1/4 P/N Swivel Branch Tee 10mm x 3/8 P/N Swivel Branch Tee 12mm x 3/8 P/N Swivel Branch Tee 12mm x 1/2 P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

17 A29-17 AIR HOSE REPAIR KIT ASSORTMENT P/N All components necessary repair 1/4 and 3/8 air hose Industrial interchange couplers and plugs can be used with any connectors that meet MIL-C-4109 All stainless steel hose clamps for maximum corrosion resistance Precision made Blo-Gun easily controls air flow 67 1/4 NPT Female Quick Disconnect Brass Coupler Body P/N /4 x 1/8 Male Hose Barb P/N /4 to 5/8 S/S #4 Mini Clamp P/N /16 to 7/8 S/S #6 Mini Clamp P/N /4 NPT Male Quick Disconnect Brass Coupler Body P/N /4 x 1/4 Male Hose Barb P/N /4 NPT Female Quick Disconnect Brass Coupler Plug P/N /8 x 1/4 Male Hose Barb P/N /4 I.D. Brass Hose Mender P/N /4 NPT Male Quick Disconnect Brass Coupler Plug P/N MMS LEVEL B 3/8 x 3/8 Male Hose Barb P/N /8 I.D. Brass Hose Mender P/N Full Flo Safety Lever Blo-Gun P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

18 A29-18 METRIC GREASE FITTING ASSORTMENT P/N Precision made, case hardened and cadmium plated High pressure ball check for superior performance /64 6mm x 1.0 STRAIGHT MALE PIPE THREAD P/N /32 HEX. 9mm 8mm x 1.0 STRAIGHT MALE PIPE THREAD P/N mm x o MALE PIPE THREAD P/N mm x o MALE PIPE THREAD P/N mm x o MALE PIPE THREAD P/N /64 HEX. 11mm HEX. 11mm 63 /64 HEX. 11mm 6mm x o MALE PIPE THREAD P/N MMS LEVEL C 10mm x 1.0 STRAIGHT MALE PIPE THREAD P/N mm x o MALE PIPE THREAD P/N mm x o MALE PIPE THREAD P/N CHROMATE 100 DaVINCI DRIVE, BOHEMIA, NY BUY-BOLT FAX:

19 A29-20 OIL PAN DRAIN PLUG ASSORTMENT Made of steel Oversized used to replace stripped out drain plug Double oversized used to replace stripped out self-tapping oversized plug Triple oversized used to replace stripped out oversized plug or self-tapping double oversized plug Piggyback fits stripped 1/2" threads in oil pan Piggyback fits AM, GM, Chrysler and Ford products thru 1981 with 1/2" pan plugs Long Tip style made for easier installation Universal rubber drain plug used for stripped threads in oil pan P/N /2-20 STANDARD OIL PAN DRAIN PLUG P/N /2-20 STANDARD OIL PAN DRAIN PLUG W/LONG TIP P/N /2-20 OVERSIZED OIL PAN DRAIN PLUG P/N /2-20 DOUBLE OVERSIZED OIL PAN DRAIN PLUG P/N /2-20 TRIPLE OVERSIZED OIL PAN DRAIN PLUG P/N /2-20 OVERSIZED PIGGYBACK OIL PAN DRAIN PLUG P/N /2-20 DOUBLE OVERSIZED PIGGYBACK OIL PAN DRAIN PLUG P/N /2 FIBER GASKET FOR DRIAN PLUG P/N /2 1/2 FIBER GASKET FOR OVERSIZED FIBER GASKET FOR LONG TIP 1/2 1/2 DRAIN PLUG DRAIN PLUG NYLON GASKET FOR DRAIN PLUG UNIVERSAL RUBBER DRAIN PLUG P/N P/N P/N P/N CHROMATE 100 DAVINCI DRIVE, BOHEMIA, NY, BUY-BOLT FAX: MMS LEVEL B

20 A29-21 METRIC OIL PAN DRAIN PLUG ASSORTMENT Metric steel drain plugs to fit most oil pans Nylon gaskets for all drain plug sizes Specialty gasket includes one-piece metal gasket and synthetic rubber equivalent O-ring center P/N mm X 1.25 OIL PAN DRAIN PLUG P/N mm X 1.75 OIL PAN DRAIN PLUG P/N mm X 1.50 OIL PAN DRAIN PLUG P/N mm X 1.50 OIL PAN DRAIN PLUG P/N mm X 1.50 OIL PAN DRAIN PLUG P/N mm X 1.50 OIL PAN DRAIN PLUG P/N mm NYLON GASKET FOR DRAIN PLUG P/N mm NYLON GASKET FOR DRAIN PLUG P/N mm NYLON GASKET FOR DRAIN PLUG P/N ILLUSTRATIONS ACTUAL SIZE Label No mm 20mm 12mm NYLON GASKET FOR DRAIN PLUG NYLON GASKET FOR DRAIN PLUG SPECIALTY GASKET P/N P/N P/N CHROMATE 100 DAVINCI DRIVE, BOHEMIA, NY, BUY-BOLT FAX:

21 COMPOSITE FITTINGS FRACTIONAL Positive gripping action of gripping ring allows tubing to withstand vibration with or without pressure Unrestricted ID allows maximum flow Possible to use smaller tube size where larger tubing with compression or barb fitting has been required Fully reuseable since there are no ferrules or inserts Elbow and tee configurations are orientable One-piece fitting means reduced assembly time and fewer parts in inventory Tapered male pipe threads have pre-applied thread sealant. P/N /8 x 1/8 P/N /8 x 3/8 P/N /8 x 1/4 Male Elbow P/N /8 Union P/N /4 x 1/8 P/N /8 x 1/8 Male Elbow P/N /8 x 3/8 Male Elbow P/N /4 Union P/N /4 x 1/4 P/N /4 x 1/8 Male Elbow P/N /4 Union Tee P/N /8 Union P/N A /8 x 1/4 P/N MMS LEVEL D 1/4 x 1/4 Male Elbow P/N /8 Union Tee P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OH BUY-BOLT FAX:

22 COMPOSITE FITTINGS METRIC Easy one piece construction No tools or extra components needed to connect fitting Reduced assembly time... up to 75% savings compared to compression fittings Automatically locks and seals to maximum working pressure Wide release collar allows fast and easy removal of tubing for line checks P/N Male pipe threads are precoated with liquid sealant Unique positive gripping action of locking teeth allows tubing to withstand vibration with or without pressure Because there is no nut, fittings can be closely mounted Unrestricted tube I.D. allows for maximum airflow Fully reusable and silicon free 28 4mm x 1/8 P/N mm x 1/4 P/N mm x 1/4 Male Elbow P/N mm Union P/N mm x 1/4 P/N mm x 3/8 P/N mm x 1/8 Male Elbow P/N mm (5/16) Union P/N mm x 1/8 P/N mm x 1/8 Male Elbow P/N mm x 1/4 Male Elbow P/N mm (5/32) Union Tee P/N mm x 1/4 P/N mm x 1/4 Male Elbow P/N mm x 3/8 Male Elbow P/N mm Union Tee P/N A mm x 1/8 P/N MMS LEVEL D 6mm x 1/8 Male Elbow P/N mm (5/32) Union P/N mm (5/16) Union Tee P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OH BUY-BOLT FAX:

23 A29-24 PRESS FITTINGS - COPPER/PRESS-FIT ASSORTMENT Combines all the known advantages of copper with clean, rapid, heat-free joining technology No glues, fluxes or solder needed A purpose designed O-ring provides the mechanism by which a perfect seal is created No consumable materials - reduces material cost and storage P/N COUPLING WITH STOP - CXC P/N COUPLING WITH STOP - CXC P/N COUPLING WITHOUT STOP - CXC P/N COUPLING WITHOUT STOP - CXC P/N REDUCER COUPLER - CXC x P/N COUPLER FEMALE ADAPTER - CXF x P/N COUPLER FEMALE ADAPTER - CXF x P/N COUPLER MALE ADAPTER - CXM x P/N COUPLER MALE ADAPTER - CXM x P/N ELBOW - CXC P/N ELBOW - CXC P/N ELBOW - CXC P/N ELBOW - CXC P/N TEE - CXCXC x x P/N TEE - CXCXC x x P/N TEE - CXCXC x x P/N TUBE CAP - C P/N TUBE CAP - C P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OHIO BUY-BOLT FAX:

24 A29-25 PUSH FITTINGS - COPPER/PUSH-IN ASSORTMENT Provide plumbing system design flexibility by allowing you to join Copper and CPVC lines with just one fitting The fittings simply push together in seconds to create a perfect joint. No torches and no solder are required P/N COUPLING WITH STOP - CXC P/N COUPLING WITH STOP - CXC P/N COUPLING - CXC x P/N FEMALE ADAPTER - CXF P/N FEMALE ADAPTER - CXF P/N MALE ADAPTER - CXM P/N MALE ADAPTER - CXM P/N ELBOW - CXC P/N ELBOW - CXC P/N ELBOW - CXC P/N ELBOW - CXC P/N STREET ELBOW - FTGXC P/N STREET ELBOW - FTGXC P/N TEE - CXCXC x x P/N TEE - CXCXC x x P/N TEE - CXCXC x x P/N TUBE CAP - C P/N TUBE CAP - C P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OHIO BUY-BOLT FAX:

25 A29-26 REMOVABLE FITTINGS - COPPER/PUSH-IN ASSORTMENT For ½'' to 1'' diameter potable water systems Heat free method for joining Copper and CPVC tube The fittings simply push together in seconds to create a perfect joint, they are designed to save time and money on installations No torches and no solder are required Requires no extra materials beyond the fitting for Copper and CPVC tube installations The use of solder, flux, heat or special pressing tools is eliminated P/N COUPLING WITH STOP - C X C P/N COUPLING WITH STOP - C X C P/N REDUCER COUPLING - C X C x P/N FEMALE ADAPTER - C X F P/N FEMALE ADAPTER - C X F P/N MALE ADAPTER - C X M P/N MALE ADAPTER - C X M 3/4 P/N ELBOW - C X C P/N ELBOW - C X C P/N TEE FITTINGS - C X C X C P/N TEE FITTINGS - C X C X C P/N TEE FITTINGS - C X C X C x x P/N TUBE CAP - C P/N TUBE CAP - C P/N DEMOUNTING CLIP P/N DEMOUNTING CLIP P/N SLIP COUPLING P/N SLIP COUPLING P/N BALL VALVE P/N BALL VALVE P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OHIO BUY-BOLT FAX:

26 TAPERED POLY CAPS AND PLUGS, RED 405 T-1 Tapered Poly Plug, Non-thread Plug Size: 0.302'' Cap Size: 0.174'' P/N T-2 Tapered Poly Plug, Non-thread Plug Size: 0.365'' Cap Size: 0.235'' P/N T-2X Tapered Poly Plug, Non-thread Plug Size: 0.396'' Cap Size: 0.267'' P/N )ICFAD 11341U )ICFAD 11349Q )ICFAD 11342R )ICFAD 11344V )ICFAD 11345S FEATURES Use as a cap or a plug Made from flexible low density polyethylene Fits snugly, yet removable Use on MIL Std., SAE type tube, hydraulic fittings, plus threaded external and internal NPT fittings T-5 Tapered Poly Plug, Non-thread Plug Size: 0.547'' Cap Size: 0.409'' P/N T-6 Tapered Poly Plug, Non-thread Plug Size: 0.608'' Cap Size: 0.468'' P/N T-6X Tapered Poly Plug, Non-thread Plug Size: 0.631'' Cap Size: 0.487'' P/N )ICFAD 11352Q )ICFAD 11353X T-9 Tapered Poly Plug, Non-thread Plug Size: 0.788'' Cap Size: 0.628'' P/N T-9X Tapered Poly Plug, Non-thread Plug Size: 0.823'' Cap Size: 0.663'' P/N T-12X Tapered Poly Plug, Non-thread Plug Size: 1.040'' Cap Size: 0.855'' P/N T-13 Tapered Poly Plug, Non-thread Plug Size: 1.090'' Cap Size: 0.901'' P/N P/N )ICFAD 11387S )ICFAD 11360V )ICFAD 11369Y )ICFAD 11361S )ICFAD 11371R )ICFAD 11355R )ICFAD 11363W )ICFAD 11377T T-3 Tapered Poly Plug, Non-thread Plug Size: 0.396'' Cap Size: 0.267'' P/N )ICFAD 11347W T-7 Tapered Poly Plug, Non-thread Plug Size: 0.667'' Cap Size: 0.518'' P/N T-10 Tapered Poly Plug, Non-thread Plug Size: 0.848'' Cap Size: 0.687'' P/N T-15X Tapered Poly Plug, Non-thread Plug Size: 1.360'' Cap Size: 1.173'' P/N )ICFAD 11359Z )ICFAD 11364T )ICFAD 11384R A29-27 T-4 Tapered Poly Plug, Non-thread T-8X Tapered Poly Plug, Non-thread T-11 Tapered Poly Plug, Non-thread T-17S Tapered Poly Plug, Non-thread Plug Size: 0.485'' Cap Size: 0.356'' Plug Size: 0.755'' Cap Size: 0.613'' Plug Size: 0.911'' Cap Size: 0.740'' Plug Size: 1.600'' Cap Size: 1.451'' P/N P/N P/N P/N CHROMATE 5250-A NAIMAN PARKWAY, SOLON, OH BUY-BOLT FAX:

CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT

CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT A15-1 TM CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT P/N 7705 Precision, burr-freethreads for exact fit Special chromate plating resists rust and corrosion for easier removal 1180 6-32 x 1/2

More information

BRASS FITTINGS and Related Products

BRASS FITTINGS and Related Products Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake

More information

Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.

Brass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in. Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8

More information

Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve

Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used

More information

2016 New Product Catalog. Brass Fittings. & Accessories

2016 New Product Catalog. Brass Fittings. & Accessories 2016 New Product Catalog Brass Fittings & Accessories Blank Page Inside Front Cover Table of Contents 04-07 Pipe Fittings & Nipples 08-11 Compression Fittings 12-15 Flare Fittings 16-17 Garden Hose Fittings

More information

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends

More information

Quicklub Lubrication Systems Fittings, Adapters and Accessories

Quicklub Lubrication Systems Fittings, Adapters and Accessories Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2

More information

BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING

BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE

More information

Sec. 11 NYLON CONNECTORS

Sec. 11 NYLON CONNECTORS Sec. 11 NYLON CONNECTORS 12946 Connector 5/16" x 5/16" 1/8 1/8 12916 12919 12921 12938 Connector 3/8" x 1/4" 1/8 12924 1/4" 12934 Connector 3/8" x 3/8" 18835 (E1ZE-9E499-EA) Nylon 1/8 12926 17629 12922

More information

Brass Compression Fitting Range

Brass Compression Fitting Range Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109

More information

Lubrication Installation Components, Accessories & Fittings Table of Contents

Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................

More information

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Featured Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-8 Series 2000 Expander Hose Ends Page 7 Series 2000 Reducer Hose Ends

More information

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls

More information

CAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS

CAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS Sec.1 Sec. 10 CAPS & CONNECTORS Vinyl Vacuum Caps Can be used for capping lines and hoses while testing carburetors, emission control systems, vacuum lines etc. Color coded for size identification. Fits

More information

D. S. HULL COMPANY, INC

D. S. HULL COMPANY, INC PVC Slip x Female Pipe Adapters Mfg Slip Female Pipe 235736 435-005 1/2 1/2 $0.81 235747 435-007 3/4 3/4 $1.03 235758 435-010 1 1 $1.18 235769 435-012 1-1/4 1-1/4 $1.84 235770 435-015 1-1/2 1-1/2 $2.11

More information

Hose & Fittings

Hose & Fittings Hose & Fittings www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620)

More information

Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:

Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax: COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball

More information

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS

TABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Series 2000 Pro-Flow Race Hose Ends Page 3-4 Series 3000 Race Hose Ends Page 5-7 Series 3000 Direct-Fit Hose Ends Page 8-9 Premium Black

More information

Table of Contents. SeaTechInc.com

Table of Contents. SeaTechInc.com Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick

More information

Quicklub Lubrication Systems Fittings, Adapters and Accessories

Quicklub Lubrication Systems Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and

More information

Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings

Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression

More information

Electrical and Hardware Components

Electrical and Hardware Components www.ktoolinternational.com 1.800.762.6002 147 Nylon Cable Ties Hundreds of uses, including electrical, auto, marine, home and garden. Available in black or natural. Many sizes for a variety of applications.

More information

Special Adapters & Fittings "(BC = Inside Back Cover

Special Adapters & Fittings (BC = Inside Back Cover Alphabetical Index Product Page No. Air Blow Guns and Accessories.............................................. 61 Air Brake Coil Kits (Tractor Trailers)......................................0 Air Brake

More information

USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Fluid Power Solutions E715 V5 (8/17)

USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Fluid Power Solutions E715 V5 (8/17) USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fluid Power Solutions E715 V5 (8/17) LAWSON PRODUCTS' FLUID POWER SOLUTIONS Hydraulic Hose Systems Cut Your Hose Costs 50% by Making

More information

Page. Table of Contents. 2 SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4

Page. Table of Contents. 2  SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 Table of Contents Page SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 G1212 NYLON AIR BRAKE: G1212 Bulk Tubing...4 G212 RUBBER AIR BRAKE HOSE: G212 & G212L Bulk Hose...5 G212 Hose Assemblies...5

More information

Quicklub Lubrication Systems

Quicklub Lubrication Systems Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for

More information

$1.50 $3.00 U.S. &adaptors chart

$1.50 $3.00 U.S. &adaptors chart $.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance

More information

BRASS HOSE BARBS G21B

BRASS HOSE BARBS G21B BRASS HOSE BARBS For clamshell packaged parts add: PAK to the part number. Eg... G20B-025:PAK, etc. Part Pipe Hose PRICE EACH Pkg Number Size I.D. PAK Loose Std Pkg Qty G2B45 45 MALE NPT HOSE BARB Part

More information

4200/4400 ONE-PIECE NON-SKIVE COUPLINGS

4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules

More information

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading. hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI

More information

MACHINES RECOVERY. 99 Washington Street Melrose, MA Phone Toll Free SYSTEMS SUPEREVAC

MACHINES RECOVERY. 99 Washington Street Melrose, MA Phone Toll Free SYSTEMS SUPEREVAC 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com RECOVERY SUPEREVAC HOSES 29 RECOVERY HOSES 1/4" 4-IN-1 BALL VALVE TOOL For vacuum,

More information

Composite Push-In Fittings BSP/Metric Series 7000

Composite Push-In Fittings BSP/Metric Series 7000 2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,

More information

Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings

Jones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe

More information

Electronic Service Manuals

Electronic Service Manuals Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions

More information

tubing, faucets and fittings

tubing, faucets and fittings small Bore teflon ptfe tubing Order by the Foot* Superior Chemical Resistance High degree of flexibility allows multiple twists and turns in tight spaces Non-stick surface will not collect particulates

More information

MARCH Polyethylene Piping Systems.

MARCH Polyethylene Piping Systems. MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional

More information

FIT-2. Inch. Ø Â" to Ë" O/D tube

FIT-2. Inch. Ø Â to Ë O/D tube For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and

More information

PARTS LIST WRANGLER 2625 DB

PARTS LIST WRANGLER 2625 DB PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24

More information

PB18-G Series Portable Pump Service Parts List

PB18-G Series Portable Pump Service Parts List Document Number Issue Date 01/24/07 Rev. Date 7/28/16 PB18-G Series Portable Pump Service Parts List Component Pump Pump Model (Located on Serial Plate) PB18-G2015B PB18-G2015F Exploded View See Page Cross

More information

PARTS LIST PONY 20 SCA

PARTS LIST PONY 20 SCA PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -

More information

connection solutions in stainless steel

connection solutions in stainless steel connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.

More information

Fluid Flow Components Composantes pour un monde fluide

Fluid Flow Components Composantes pour un monde fluide 6011 Fluid Flow Components Composantes pour un monde fluide Vancouver Edmonton Winnipeg Toronto Montreal Moncton Product Index BRASS FITTINGS Page Carded...45-46 Closet Bolt...42 Compression...9-12 Compression

More information

MINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)

MINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513) MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings

More information

Sec. 13 Y CA BLE & HAR NESS

Sec. 13 Y CA BLE & HAR NESS OIL DRAIN PLUG GAS KETS Sec. 13 Y CA BLE & HAR NESS Steel With Rubber Seal Oil Drain Plug Gaskets Auveco Thick- Unit Part No. I.D. O.D. ness Pkg. 16026...1/2"...1"...3/64"...5 18299...14mm...25mm...1mm...10

More information

TWIN ROTARY RAKE PARTS BOOK MODEL

TWIN ROTARY RAKE PARTS BOOK MODEL TWIN ROTARY RAKE PARTS BOOK MODEL 2650 17.01135 This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:

More information

Engineering Data. Assembly Length. How to Determine Correct Assembly Length

Engineering Data. Assembly Length. How to Determine Correct Assembly Length Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown

More information

:,Rhino SD/XD G/D 24 Vdc ISO

:,Rhino SD/XD G/D 24 Vdc ISO :,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson

More information

OwNErS MaNual with INSTallaTION INSTrucTIONS

OwNErS MaNual with INSTallaTION INSTrucTIONS OwNErS MaNual with INSTallaTION INSTrucTIONS EMISSIONS KIT light duty 6.2l chevrolet/gm diesel for use on gm 6.2L diesel trucks equipped with the banks sidewinder turbo system this manual is for use with

More information

Retriever 360G/P. 5/92 revised 2/01 FORM NUMBER

Retriever 360G/P. 5/92 revised 2/01 FORM NUMBER Retriever 360G/P PARTS LIST Advance MODELS 56468470, 56468480 This parts list is for machines after serial number 505073 All models covered in this manual are OBSOLETE 5/92 revised 2/01 FORM NUMBER 56042267

More information

HANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL

HANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL PRO SERIES SPRAYING SYSTEMS NO. AA18-AL HANDGUNS 3PT SKID HEAVY DUTY TYPE ROTATING HANDLE CONTROL Handle rotates 360 to operate spray gun valve from shutoff to maximum flow position. As handle is turned,

More information

KIT. light duty 6.2L chevrolet/gm diesel. for use on gm 6.2L diesel trucks equipped with the banks sidewinder turbo system

KIT. light duty 6.2L chevrolet/gm diesel. for use on gm 6.2L diesel trucks equipped with the banks sidewinder turbo system owners manual with installation instructions EMISSIONS KIT light duty 6.2L chevrolet/gm diesel for use on gm 6.2L diesel trucks equipped with the banks sidewinder turbo system this manual is for use with

More information

ONE TOUCH FITTINGS Series WP2

ONE TOUCH FITTINGS Series WP2 ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available

More information

Low Pressure Series - Accessories. High Pressure Series - Accessories

Low Pressure Series - Accessories. High Pressure Series - Accessories Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray

More information

Q SERIES II GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER

Q SERIES II GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER Models Q90-25 Q90-50 Q90-75 Q90-200 Q90 25-200 SERIES II GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER REPAIR PARTS, OPTIONAL KITS Ordering Instructions Order Parts through your nearest supplier. When

More information

TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97

TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97 Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender

More information

Q SERIES II GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER

Q SERIES II GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER Models Q90-25 Q90-50 Q90-5 Q90-200 Q90 25-200 SERIES II GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER REPAIR PARTS, OPTIONAL KITS Ordering Instructions Order Parts through your nearest supplier. When

More information

Pistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible

Pistol Grease Guns. AC475 comes complete with 4 steel extension and 4-jaw coupler with ball check AC476 comes complete with 18 flexible Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:

More information

Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...

Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature... FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)

More information

Mini Fire-Ball 225, 50:1

Mini Fire-Ball 225, 50:1 Mini Fire-Ball 225, 5:1 Features and Benefits Non-corrosive air motor design for long life Double-acting pump ensures smooth fl uid fl ow Robust grease inlet cage withstands the most abusive handling Typical

More information

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.

Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No. Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol

More information

LF 3600 Push-In Fittings Range

LF 3600 Push-In Fittings Range LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In

More information

truck and trailer D.O.T. APPROVED FITTINGS, TUBING, CLAMPS AND ACCESSORIES

truck and trailer D.O.T. APPROVED FITTINGS, TUBING, CLAMPS AND ACCESSORIES truck and trailer D.O.T. APPROVED FITTINGS, TUBING, CLAMPS AND ACCESSORIES D.O.T. FITTINGS AND ACCESSORIES Our Versa line stands for quality and value in the world of D.O.T. approved fittings and accessories

More information

GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER ( MBH) REPAIR PARTS MANUAL. P/N , Rev. 1.2 [02/06]

GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER ( MBH) REPAIR PARTS MANUAL. P/N , Rev. 1.2 [02/06] GAS-FIRED DIRECT VENT CONDENSING HOT WATER BOILER (25-200 MBH) REPAIR PARTS MANUAL P/N 24000523, Rev..2 [02/06] TABLE OF CONTENTS I. Circulator Pumps (Optional)...2 II. Burner Assembly...3 III. Boiler

More information

FITTING SELECTION GUIDE

FITTING SELECTION GUIDE This white paper will help you to determine which miniature (barbed, push-to-connect, or compression) fitting type is suitable for your specific application. At the beginning of a new project, engineers

More information

PARTS LIST WRANGLER 26-VS

PARTS LIST WRANGLER 26-VS PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY

More information

AIR HOSE / COUPLERS Air Hose / Couplers For Use with 3538, 3539 ColorConnex Green Coupler Type B, 1/4 in MNPT

AIR HOSE / COUPLERS Air Hose / Couplers For Use with 3538, 3539 ColorConnex Green Coupler Type B, 1/4 in MNPT 3536 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in FNPT 3541 For Use with 3543, 3544 ColorConnex Blue Type C, 1/4 in FNPT 3537 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in MNPT 3542

More information

PARTS LIST WRANGLER 2625 DB

PARTS LIST WRANGLER 2625 DB PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24

More information

VACUUM AND CHARGING HOSES

VACUUM AND CHARGING HOSES VACUUM AND HOSES RECOVERY YELLOW JACKET HVAC&R VACUUM SUPEREVAC AND HOSES YELLOW JACKET PLUS II Charging Hoses Double barrier protection for CFC, HCFC and HFC refrigerants 20 EDITION 62 CATALOG RECOVERY

More information

Marine Generators Marine Diesel Engines Land-Based Generators

Marine Generators Marine Diesel Engines Land-Based Generators P1066 For Models: L1066T, L1066A, L1066H, M1066T, M1066A1, M1066A2, M1066A3, M1066H, M1066TMCA, NL1066T, NL1066H1, NL1066H2, NL1066H3, NL1066H4, and M99C2 PARTS CATALOG Marine Generators Marine Diesel

More information

Electronic Service Manuals

Electronic Service Manuals Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions

More information

Fluid Dispensing Systems

Fluid Dispensing Systems Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028

More information

Lubrication Fittings. General Information. Alemite Lubrication Fittings include:

Lubrication Fittings. General Information. Alemite Lubrication Fittings include: General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11

More information

Pneumatic Tubing. A. Polyethylene Fractional Metric. B. Nylon Fractional Metric Mini-Coils

Pneumatic Tubing. A. Polyethylene Fractional Metric. B. Nylon Fractional Metric Mini-Coils A. Polyethylene Fractional Metric B. Nylon Fractional Metric Mini-Coils C. Polyurethane Fractional Metric EZ Strip Bonded Polyurethane Mini Coils D. Ny-Chem Kynar * PVDF Fractional Metric Mini-Coils E.

More information

Automotive Plumbing Catalog

Automotive Plumbing Catalog Automotive Plumbing Catalog Metal Tubing Tube Nuts Weld-On Studs Tube Unions Clips and Brackets Bulkhead Nuts Tees Thread Adapters Bump Tube Adapters Transmission Line Adapters Copper Washers Banjo Bolts

More information

Automotive Hardware Toll-Free

Automotive Hardware Toll-Free Automotive Hardware Wheel Studs Lug Nuts Oil Drain Plugs Drain Plug Gaskets Nuts & Bolts Tube Fittings Pipe Fittings Compression Fittings Drain Cocks Hose Connectors Vacuum Connectors Air Cleaner Wing

More information

TRANSMISSION OIL COOLERS

TRANSMISSION OIL COOLERS TRANSMISSION OIL COOLERS Transmission Oil Coolers Over 14 million transmissions fail every year, 9 out of 10 from overheating. Every 20 F drop in operating temperature can double oil and equipment life.

More information

P RECISION P ERFORMANCE EASY CALIBRATION PRECISE IS NICE FOR 35 YEARS. (352) Orange Lane Hawthorne, FL 32640

P RECISION P ERFORMANCE EASY CALIBRATION PRECISE IS NICE FOR 35 YEARS.  (352) Orange Lane Hawthorne, FL 32640 EASY CALIBRATION 1 - Set nozzle spacing & height 2 - Set uniform flow with pressure adjustment 3 - Set walking speed with metronome and stop-watch Speed control is the most important factor for a precise

More information

PARTS LIST STALLION 8 SC

PARTS LIST STALLION 8 SC PARTS LIST STALLION 8 SC DOME ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 101 4894969 DOME ASSEMBLY - INCLUDES: 1 4894351 DOME 1 101A 4890121 DOME GASKET 1 101B 4890911 ADAPTOR - 1 1/2 MPT X 1 1/2 MSL

More information

Bid # Plumbing Supplies RESULTS

Bid # Plumbing Supplies RESULTS BOARD APPROVED Bid # 15-4 - Plumbing Supplies Page 1 of 16 Grant Plumbing North Brunswick NJ PVC PIPE, SCHEDULE 40 1 1-1/4" PVC Pipe, SCH 40, 20' feet 60 $0.598 $35.88 2 1-1/2" PVC Pipe, SCH 40, 20' feet

More information

M-8100EP. Installation Guide ENGINEERED PLASTIC MANIFOLD SERIES. Introduction. A. Assemble Manifold Components

M-8100EP. Installation Guide ENGINEERED PLASTIC MANIFOLD SERIES. Introduction. A. Assemble Manifold Components Introduction The Pro Manifolds with Integrated adaptor are designed for use in Hydronic radiant panel heating and cooling applications. They are available in various sizes, configurations, and options

More information

ABOUT US ABOUT US OUR VISION OUR MISSION CORE VALUES

ABOUT US ABOUT US OUR VISION OUR MISSION CORE VALUES ABOUT US Our company is led by a professional team, and is equipped with 15 Mobile Service Vans to attend break downs and turnkey jobs on site around the clock all over in UAE. If the volume of work is

More information

VALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS

VALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT NEW HOLLAND 73 LOADER NEW HOLLAND TRACTORS MODEL 2WD FWA LESS CAB WITH CAB TT55 X X X TT75 X X X Valve and plumbing kit can be installed

More information

Innovative Design Maximum Capability

Innovative Design Maximum Capability Optimum Performance Innovative Design Maximum Capability www.liquifit.net 7205 East Hampton Avenue Mesa Arizona 85209-3301 Introducing From the Trusted Inventor of the Push-to-Connect Fitting With over

More information

Compression Style Transportation

Compression Style Transportation Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube

More information

Brass Compression Fitting Range

Brass Compression Fitting Range Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199

More information

Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows

Mur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These

More information

Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options

Pneufit Inch Series Push-In Tube Fittings 1/8 to 1/2 Tube Sizes UNF to 1/2 NPT Thread Options Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3

More information

1 CHASSIS, AEP, ASSY, E1000-C, E2000-C, E3000-C 1 JP TANK, SOLUTION, STEEL, PAINTED, 6GAL, ASSY 1 JP7725-A 3 PANEL, COVER, REAR, STEEL,

1 CHASSIS, AEP, ASSY, E1000-C, E2000-C, E3000-C 1 JP TANK, SOLUTION, STEEL, PAINTED, 6GAL, ASSY 1 JP7725-A 3 PANEL, COVER, REAR, STEEL, 1 CHASSIS, AEP, ASSY, E1000-C, E2000-C, E3000-C 1 JP7712 2 TANK, SOLUTION, STEEL, PAINTED, 6GAL, ASSY 1 JP7725-A 3 PANEL, COVER, REAR, STEEL, PAINTED, AEP 1 JP7729 4 WHEEL, PNEUMATIC, 10"ODX3/4"ID, BALL

More information

funnels, measures, gravity cocks, jerry cans and oil suction pumps...

funnels, measures, gravity cocks, jerry cans and oil suction pumps... funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................

More information

VALVE PARTS VALVE PARTS

VALVE PARTS VALVE PARTS VALVE PARTS 559 DIVERTER VALVES -/2 IN. AND 2 IN. REPLACEMENT PARTS (PACFAB AND COMPOOL VALVES) Item No. Part No. Description DIVERTER VALVES -/2 IN. AND 2 IN. 270032 Handle Knob 2 & 3-Way Valve 7.30 20.79

More information

SECTIO N 15 Phone: (866) Fax: (888)

SECTIO N 15   Phone: (866) Fax: (888) PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS

More information

Electronic Service Manuals

Electronic Service Manuals Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions

More information

The One Stop Shop for Automotive Plumbing

The One Stop Shop for Automotive Plumbing BQAP-0911 INNOVATIVE SOLUTIONS FOR AUTOMOTIVE PLUMBING The One Stop Shop for Automotive Plumbing Lab Tested - Tuff! AUTOMOTIVE PLUMBING Catalog www.brakequip.com Copyright 2011 $1.50 USA BRAKEQUIP Fittings

More information

Taps, Valves & Components. Section 1

Taps, Valves & Components. Section 1 Taps, Valves & Components Section 1 taps, valves & components index Index 1 SECTION PAGE sink taps 1.1-1.4 sink taps & spares 1.5 basin taps 1.6 general purpose taps & valves 1.7 flexible connectors, angle

More information

PARTS LIST WRANGLER 2625 DB

PARTS LIST WRANGLER 2625 DB PARTS LIST WRANGLER 2625 DB WITH SIDEKICK CHEMICAL DISPENSOR WITHOUT SIDEKICK CHEMICAL DISPENSOR 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221

More information

Recoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION

Recoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION Polyurethane Recoil Hose Greater durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics Longer life expectancy due to kink resistant properties Superior recoil memory due

More information

Parts / Spares Reference Sheet

Parts / Spares Reference Sheet Parts / Spares Reference Sheet Graco GH200 Sprayer Models Sprayer Models GH30 GH200 GH230 GH300 20 Vac 60 Hz ETL/CSA/UL 20 Vac 60 Hz 253957 253959 253980 253962 253963 25398 255095 253965 253966 253982

More information

MINIMATIC CONNECTOR FITTINGS

MINIMATIC CONNECTOR FITTINGS MINIMATIC CONNECTOR FITTINGS 15453 Male 10-32 Coupling.062 dia. - thru.342 Material: Stainless steel Thread: 10-32 Seals: Loctite necessary Use: Excellent for a surface to surface connection of female

More information

Specialty Fluid Fittings

Specialty Fluid Fittings Buyers guide Specialty Fluid Fittings for lubrication systems FEATURING Couplings & s Adapters Compression fittings Check valves Meter and control units bijur.com B r6-06 Buyer's guide to specialty fluid

More information

Quick Couplings. Section F

Quick Couplings. Section F Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions

More information