BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
|
|
- Cora Potter
- 5 years ago
- Views:
Transcription
1
2 BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE PUSH LOCK FITTINGS - NYLON TUBING COMPRESSION FITTINGS PIPE FITTINGS SAE 45 FLARED FITTINGS INVERTED FLARED FITTINGS HOSE BARB FITTINGS COLLETTE STYLE FITTINGS - TRANSMISSION TUBING QUICK DISCONNECTS GREASE FITTINGS VALVES AND SHUTOFF COCKS
3 BRASS MATRIX This chart illustrates the part number naming matrix for TECTRAN's tubing fittings. Part number QL D is being used as an example. Nylon tube fitting images used as reference. Thread QL D 5/8 1/2 = These fields are not always present = These fields are always present Q L D PUSH LOCK INDICATOR (OPTIONAL) TUBING TYPE FITTING TYPE TYPE TUBE SIZE 1st DIGIT TUBE SIZE 2nd DIGIT (OPTIONAL) PIPE THREAD (OPTIONAL) PL= Brass Push Lock Style QL= Composite Push Lock Style Non-Push Lock fittings do NOT use this prefix 11 = Fittings for copper tubing 13= Fittings for nylon tubing 62 Union 64 Union T" 2 = 1/8" 25 = 5/32" 3 = 3/16" 4 = 1/4" 5 = 5/16 6 = 3/8 7 = 7/16 8 = 1/2" 10 = 5/8" 12 = 3/4" 14 = 7/8 1= 1/16" A= 1/8" B= 1/4" C= 3/8" D= 1/2" E= 3/4" H= 1 * Reducer T" Available Union Elbow Female Connector Male Connector Male Elbow Female Elbow Male Run T" Male Branch T" Male Elbow Bulkhead Union Female Branch T" Female Bulkhead Union *Reducer T" fitting will utilize 3 numbers in the last three positions, which indicates tube sizes at each position per Tubing " chart above. (e.g ) PL" Only PL" & QL" Only
4 TABLE OF CONTENTS Air Brake Hose 34 Air Brake Tubing Air Compressor Discharge Hose 35 Air Compressor Discharge Hose Assemblies 35 Brake Line Unions 23 Collet Style Fittings 23 Compression Fittings D.O.T. Air Brake Fittings - for Copper Tubing 5 D.O.T. Air Brake Fittings - for Nylon Tubing 6-10 D.O.T. Push Lock Brass Fittings - for Nylon Tubing 6-10 D.O.T. Push Lock Composite Fittings - for Nylon Tubing 6-10 Drain Cocks 28 Dual Barb Hose Fittings 22 Frame Fittings 4 Grease Fittings 25 Ground Plug Shutoff Cocks 29 Hose Barb Fittings 21 Hose End Kits 3 Inverted Flare Fittings Kits and Cabinets 31 Needle Valves 27 O-Ring Style Fittings 23 Fittings Push-Lock Standpipes 10 Quick Disconnects 24 Reusable Fittings for Discharge Hose 35 Reusable Hose Fittings 2 Ring Barb Fittings 20 SAE 45 Flared Fittings Special Adapter Fittings 30 Valve Fittings - Steel 27 Valves 26 Part Labels Feature Competitor Interchanges
5
6 FITTINGS REUSABLE HOSE FITTINGS ASSEMBLY (W/ SPRING GUARD) - D.O.T I.D./ Hose Thread /8 1/ /8 3/ /8 1/ /2 3/ /2 1/2 ASSEMBLY (W/O SPRING GUARD) - D.O.T I.D./ Hose Thread /8 1/ /8 3/ /8 1/ /2 3/ /2 1/2 SPRING SPRING-NUT ASSEMBLY - D.O.T HOSE MENDER - D.O.T I.D./ Hose / /2 I.D./ Hose / /2 I.D./ Hose / /2 BODY FERRULE NUT-D.O.T I.D./ Hose Thread /8 1/ /8 3/ /8 1/ /2 3/ /2 1/2 I.D./ Hose / /2 MENDER BODY SWIVEL TYPE - D.O.T SWIVEL TYPE (W/ SPRING GUARD) - D.O.T I.D./ Hose / /2 I.D./ Hose Thread /8 1/ /8 3/ /8 1/ /2 3/ /2 1/2 NUT - FOR USE W/ SPRING - D.O.T I.D./ Hose / /2 I.D./ Hose / /2 ADAPTER (FOR SWIVEL TYPE REUSABLE & CRIMPED-ON FITTINGS) I.D./ Hose Thread /8 1/ /8 3/ /8 1/2 Thread Use On Fitting Straight Thread / / / / / / / / / /8-20 FEMALE CONNECTOR - D.O.T I.D./ Hose ABS Thrd /8 3/ /2 7/8-20 2
7 FITTINGS HOSE END KITS For 3/8" ID J1402 type A, AI and AII hose with a minimum of 3/4" O.D. Thread Description /8 NPT FIX-IT Pack - includes 2 Swivel Ends & 1 Hex Wrench /2 NPT FIX-IT Pack - includes 2 Swivel Ends & 1 Hex Wrench /8 NPT Bag of 10 Swivel Ends & 1 Hex Wrench /2 NPT Bag of 10 Swivel Ends & 1 Hex Wrench /8 NPT Case of 5-3/8 FIX-IT Packs /2 NPT Case of 5-1/2 FIX-IT Packs * /8 NPT Box of 100 Swivel Ends * /2 NPT Box of 100 Swivel Ends /8 NPT FIX-IT Pack - includes 2 Swivel Ends & 1 Hex Wrench & 2 Springs * NOTE: Hex wrench not included EASY INSTALLATION IN 4 QUICK STEPS Once kit has been disassembled, position hose end on shell flush with grooves. 4 Insert Fitting into groove and position shell opposite shell. With assembly in hand, squeeze forward ends of shells and push and twist retaining ring over shells to its final position. Insert barb into fitting. (Threaded end of barb should be greased.) Push and turn to start threads. Using a 5/16" hexagon key continue to push and turn until the barb is flush inside the fitting. NOTE: Check final assembly visually to insure that hose has not shifted during assembly. CASE OF 5 FIX-IT PACKS BOX OF 100 BAG OF 10 FIX-IT PACK TEFLON PIPE TAPE TT1/
8 FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS Steel terminal bolts, zinc-plated and dichromated FEMALE TO FEMALE FEMALE TO NYLON TUBING Part No. MALE TO FEMALE Overall Length Female Thrd A Female Thrd B Ext. Straight Thrd C Mtng. Hole /8-27 NPT 1/8-27 NPT 5/8-18 NPT 11/ /4-18 NPT 1/4-18 NPT 3/4-16 NPT 7/ B* /4-18 NPT 1/4-18 NPT 3/4-16 NPT 7/ /8-18 NPT 3/8-18 NPT 1-14 NPT B* /8-18 NPT 3/8-18 NPT 1-14 NPT 1 114B /4-18 NPT 1/4-18 NPT 3/4-16 NPT 7/ /2-14 NPT 3/8-18 NPT 3/8 NPT 1 5/ /2-14 NPT 1/2-14 NPT NPT 1 5/ B* /2-14 NPT 1/2-14 NPT NPT 1 5/32 * All brass part Overall Length Female Thread A B Mtng. Hole 113-6AB /4 3/8 NPT 3/8 O.D. 7/ AB /4 3/8 NPT 1/2 O.D. 7/8 NYLON TUBING TO HOSE Hose Mtng. O.D. I.D. Hole 113-6N /8 3/8 7/8 MALE TO COPPER TUBING Overall Length Male Thread A Female Thread B Mtng. Hole /2 NPT 1/4 NPT /2 NPT 3/8 NPT B* /2 NPT 3/8 NPT /2 NPT 1/4 NPT 7/ /2 NPT 1/4 NPT /2 NPT 1/4 NPT 1 1/4 * All brass part Overall Male Mtng. Length Thread A B Hole /4 1/2 NPT 3/8 O.D. 1 COPPER TUBING TO HOSE Hose Mtng.Hole O.D. I.D C /8 3/8 7/8 THREADED SLEEVES For use with aluminum and copper tubing NUT / / /4 MALE CONNECTOR MALE ELBOW Thrd 188-2A /8 1/ A /16 1/ A /4 1/ B /8 1/4 Thrd 189-2A /8 1/ A /16 1/ A /4 1/ A /16 1/8 4
9 D.O.T. AIR BRAKE FITTINGS - FOR COPPER TUBING FITTINGS SLEEVE NUT / / / / / / / / / /4 MALE CONNECTOR Thread A /4 1/ B /4 1/ C /4 3/ A /8 1/ B /8 1/ C /8 3/ D /8 1/ B /2 1/ C /2 3/ D /2 1/ E /2 3/ C /8 3/ D /8 1/ D /4 1/ E /4 3/4 UNION TEE UNION / / / / / / / / /8 MALE ELBOW Thread A /4 1/ B /4 1/ C /4 3/ A /8 1/ B /8 1/ C /8 3/ D /8 1/ B /2 1/ C /2 3/ D /2 1/ C /8 3/ D /8 1/ D /4 1/2 UNION ELBOW / /8 FEMALE ELBOW Thread A /8 1/ B /8 1/ C /8 3/ D /8 1/2 FEMALE CONNECTOR Thread B /4 1/ B /8 1/ C /8 3/ C /2 3/8 MALE RUN TEE Thread B /8 1/ C /8 3/8 MALE BRANCH TEE 45 ELBOW AIR BRAKE TO MALE PIPE Thread A /4 1/ B /4 1/ A /8 1/ B /8 1/ C /8 3/ C /2 3/ D /2 1/2 Thread B /4 1/ B /8 1/ C /8 3/ D /8 1/ C /2 3/ D /2 1/ D /8 1/2 5
10 FITTINGS D.O.T. AIR BRAKE FITTINGS - FOR NYLON TUBING UNION PUSH-LOCK FITTING PLUG FERRULE BRASS PUSH-LOCK COMPOSITE PUSH-LOCK 1/ PL1362-2* QL1362-2* / * PL QL / PL QL1362-3* / PL QL / PL1362-5* / PL QL / PL QL / PL QL / PL QL * NOTE: Non-DOT Part O.D 1/4 PL /8 PL /2 PL UNION TEE Y UNION Mounting Hole Dimensions: ID- 4.2 millimeters OD- 8 millimeters FERRULE BRASS PUSH-LOCK COMPOSITE PUSH-LOCK 1/8 - - PL1364-2* QL1364-2* / PL * QL / PL1364-3* QL1364-3* / PL QL / PL QL / PL QL / PL QL / PL * NOTE: Non-DOT Part COMPOSITE PUSH-LOCK A B 1/4 1/4 QL /4 3/8 QL /8 3/8 QL REDUCING UNION TEE FERRULE BRASS PUSH-LOCK COMPOSITE PUSH-LOCK A B C 3/8 3/8 1/ PL QL /2 1/2 3/ QL UNION ELBOW FERRULE BRASS PUSH-LOCK COMPOSITE PUSH-LOCK 5/ PL QL / PL QL / PL QL / PL QL / PL /4 - - PL
11 D.O.T. AIR BRAKE FITTINGS - FOR NYLON TUBING FITTINGS FEMALE CONNECTOR FERRULE BRASS PUSH-LOCK COMPOSITE PUSH-LOCK Thrd 1/4 1/ A PL1366-4A QL1366-4A /4 1/ B PL1366-4B QL1366-4B /8 1/ A PL1366-6A QL1366-6A /8 1/ B PL1366-6B QL1366-6B /8 3/ C PL1366-6C QL1366-6C /2 3/ C PL1366-8C QL1366-8C /2 1/ D QL1366-8D /8 3/ C /8 1/ D QL136610D /4 1/ D MALE CONNECTOR FERRULE BRASS PUSH-LOCK COMPOSITE PUSH-LOCK Thrd 1/8 1/ * PL13682X1* QL13682X1* /8 1/ A* PL1368-2A* QL1368-2A* /8 1/ QL1368-2B* /32 1/ A* PL136825A QL136825A /32 1/4 - - PL136825B QL136825B /32 1/ * PL QL /16 1/ PL13683X /16 1/ A PL1368-3A QL1368-3A* /16 1/ B PL1368-3B QL1368-3B* /4 1/ PL /4 1/ A PL1368-4A QL1368-4A /4 1/ B PL1368-4B QL1368-4B /4 3/ C PL1368-4C QL1368-4C /8 1/ A PL1368-6A QL1368-6A /8 1/ B PL1368-6B QL1368-6B /8 3/ C PL1368-6C QL1368-6C /8 1/ D PL1368-6D QL1368-6D /2 1/ B PL1368-8B QL1368-8B /2 3/ C PL1368-8C QL1368-8C /2 1/ D PL1368-8D QL1368-8D /2 3/ E QL1368-8E /8 3/ C PL136810C QL136810C /8 1/ D PL136810D QL136810D /8 3/ E QL136810E /4 3/ QL136812C /4 1/ D PL136812D QL136812D /4 3/ E PL136812E QL136812E * NOTE: Non-DOT Part 7
12 FITTINGS D.O.T. AIR BRAKE FITTINGS - FOR NYLON TUBING MALE ELBOW FERRULE SWIVEL BRASS PUSH-LOCK SWIVEL COMPOSITE PUSH-LOCK Thrd 1/8 1/ A* PL1369-2A* QL1369-2A* /8 1/ * QL * /32 1/ QL * /8 1/ QL1369-2B* /32 1/ A* PL136925A QL136925A /32 1/4 - - PL136925B QL136925B /16 1/ A PL1369-3A QL1369-3A* /16 1/ B QL1369-3B* /4 1/ A PL1369-4A QL1369-4A /4 1/ B PL1369-4B QL1369-4B /4 3/ C PL1369-4C QL1369-4C /8 1/ A PL1369-6A QL1369-6A /8 1/ B PL1369-6B QL1369-6B /8 3/ C PL1369-6C QL1369-6C /8 1/ D PL1369-6D QL1369-6D /2 1/ B PL1369-8B QL1369-8B /2 3/ C PL1369-8C QL1369-8C /2 1/ D PL1369-8D QL1369-8D /8 3/ C PL136910C QL136910C /8 1/ D PL136910D QL136910D /8 3/ E QL136910E /4 1/ D PL136912D QL136912D /4 3/ E PL136912E QL136912E * NOTE: Non-DOT Part FEMALE ELBOW MALE ELBOW PUSH-LOCK NON-SWIVEL Thrd 1/8 1/8 PL1315-2A* /32 1/8 PL131525A /16 1/8 PL1315-3A /4 1/8 PL1315-4A /4 1/4 PL1315-4B /4 3/8 PL1315-4C /8 1/8 PL1315-6A /8 1/4 PL1315-6B /8 3/8 PL1315-6C /8 1/2 PL1315-6D /2 1/4 PL1315-8B /2 3/8 PL1315-8C /2 1/2 PL1315-8D /8 1/2 PL131510D /4 1/2 PL131512D * NOTE: Non-DOT Part FERRULE SWIVEL BRASS PUSH-LOCK SWIVEL COMPOSITE PUSH-LOCK Thrd 3/16 1/ A /4 1/ A PL1370-4A QL1370-4A /4 1/ B PL1370-4B QL1370-4B /8 1/ A PL1370-6A QL1370-6A /8 1/ B PL1370-6B QL1370-6B /8 3/ C PL1370-6C QL1370-6C /2 3/ C PL1370-8C QL1370-8C /2 1/ D PL1370-8D QL1370-8D /8 1/ D QL137010D MALE RUN TEE FERRULE SWIVEL BRASS PUSH-LOCK SWIVEL COMPOSITE PUSH-LOCK Thrd 1/4 1/ A PL1371-4A QL1371-4A /4 1/ B PL1371-4B QL1371-4B /4 3/ QL1371-4C /8 X 1/4 1/ AB QL13716AB /8 1/ B PL1371-6B QL1371-6B /8 3/ C PL1371-6C QL1371-6C /8 1/ QL1371-6D /2 1/ B QL1371-8B /2 3/ C PL1371-8C QL1371-8C /2 1/ D PL1371-8D QL1371-8D /2 X 1/4 1/2 - - PL137184D QL137184D /8 1/ D QL137110D MALE RUN TEE NON-SWIVEL image coming Thrd 3/8 X 1/4 1/4 PL13736AB /8 1/2 PL1373-6D
13 D.O.T. AIR BRAKE FITTINGS - FOR NYLON TUBING FITTINGS MALE BRANCH TEE MALE BRANCH TEE NON-SWIVEL image coming FERRULE SWIVEL BRASS PUSH-LOCK SWIVEL COMPOSITE PUSH-LOCK Thrd 1/8 1/8 - - PL1372-2A* QL1372-2A* /16 1/ A QL1372-3A* /4 1/ A PL1372-4A QL1372-4A /4 1/ B PL1372-4B QL1372-4B /8 1/ A PL1372-6A QL1372-6A /8 1/ B PL1372-6B QL1372-6B /8 x 1/4 1/ AB /8 3/ C PL1372-6C QL1372-6C /8 1/ QL1372-6D /2 1/ B PL1372-8B QL1372-8B /2 3/ C PL1372-8C QL1372-8C /2 x 3/8 3/ CC /2 1/ D PL1372-8D QL1372-8D /8 1/ D QL137210D * NOTE: Non-DOT Part Thrd 3/16 1/8 PL1376-3A FEMALE BRANCH TEE FERRULE SWIVEL BRASS PUSH-LOCK SWIVEL COMPOSITE PUSH-LOCK Thrd 1/4 1/8 - - PL1378-4A QL1378-4A /4 1/4 - - PL1378-4B QL1378-4B /8 1/ B PL1378-6B QL1378-6B /8 1/ B QL137810B FEMALE BULKHEAD UNION BRASS PUSH-LOCK COMPOSITE PUSH-LOCK Thrd 1/4 1/8 PL1386-4A QL1386-4A /4 1/4 PL1386-4B QL1386-4B /8 1/4 PL1386-6B QL1386-6B BULKHEAD UNION FERRULE BRASS PUSH-LOCK COMPOSITE PUSH-LOCK 3/ QL1377-3* / PL QL / PL QL / PL QL * NOTE: Non-DOT Part 9
14 FITTINGS D.O.T. AIR BRAKE FITTINGS - FOR NYLON TUBING 45 MALE ELBOW 45 MALE ELBOW PUSH-LOCK NON-SWIVEL FERRULE SWIVEL BRASS PUSH-LOCK SWIVEL COMPOSITE PUSH-LOCK Thrd 1/8 1/ QL1374-2A* /32 1/ QL137425A /4 1/ A PL1374-4A QL1374-4A /4 1/ B PL1374-4B QL1374-4B /4 3/ QL1374-4C /8 1/ A PL1374-6A QL1374-6A /8 1/ B PL1374-6B QL1374-6B /8 3/ C PL1374-6C QL1374-6C /8 1/ D PL1374-6D QL1374-6D /2 1/ B PL1374-8B QL1374-8B /2 3/ C PL1374-8C QL1374-8C /2 1/ D PL1374-8D QL1374-8D /8 3/ C QL137410C /8 1/ D PL137410D QL137410D /4 1/ D QL137412D * NOTE: Non-DOT Part Thrd 1/2 1/2 PL1375-8D /4 1/2 PL137512D INSERT SLEEVE NUT O.D 1/ X / X / X / X / X O.D 3/ / / / / / O.D 3/ / / / / / PUSH-LOCK STANDPIPES Solution to aid nylon tube routing in tight spaces - behind the cab, underneath the seat Commonly used on air suspension plumbing and gauges Easy to install push-to-connect design - No tool required Meets DOT FMVSS , SAE J1131 and SAE J Temperature Range: F REDUCER ADAPTER 90 ELBOW RUN TEE A B 1/4 3/8 QS37-4C /8 1/4 QS37-6B A B 1/4 1/4 QS69-4B /4 3/8 QS69-4C /8 1/4 QS69-6B /8 3/8 QS69-6C /8 1/2 QS69-6D /2 1/4 QS69-8B /2 1/2 QS69-8D /8 1/2 QS69-10D A B C 1/4 1/4 1/4 QS71-44B /4 1/4 3/8 QS71-44C /8 1/4 3/8 QS71-64C /8 3/8 3/8 QS71-66C /2 1/4 1/2 QS71-84D
15 NOTES 11
16 FITTINGS COMPRESSION FITTINGS BRASS INSERT I.D / / / / / / / / / / /4.566 SLEEVE / / / / / / / / / / /8 BULKHEAD UNION UNION TEE UNION ELBOW 90 FEMALE ELBOW / / / / / / / / / / / /2 SLEEVE IN-LINE NUT LONG NUT UNION / / / / / / / / / / / / / / / / / / / / / / / /4 45 ELBOW FEMALE CONNECTOR SMALL HEX UNION - STEEL Thrd 70-3A /16 1/8 70-4A /4 1/8 70-6B /8 1/4 Thrd 74-4A /4 1/8 74-6B /8 1/4 74-8C /2 3/8 74-8D /2 1/ D /8 1/2 Thrd 66-2A /8 1/8 66-3A /16 1/8 66-4A /4 1/8 66-4B /4 1/4 66-5A /16 1/8 66-5B /16 1/4 66-6A /8 1/8 66-6B /8 1/4 66-6C /8 3/8 66-8C /2 3/ D /8 1/ / / /4 12
17 COMPRESSION FITTINGS FITTINGS MALE CONNECTOR Thrd 68-2A /8 1/8 68-2X /8 1/ A /16 1/8 68-3B /16 1/4 68-4A /4 1/8 68-4B /4 1/4 68-4C /4 3/8 68-5A /16 1/8 68-5B /16 1/4 68-5D /16 1/2 68-6A /8 1/8 68-6B /8 1/4 68-6C /8 3/8 68-6D /8 1/2 68-8B /2 1/4 68-8C /2 3/8 68-8D /2 1/2 68-8E /2 3/ D /8 1/ D /4 1/ E /4 3/4 MALE ELBOW Thrd 69-2A /8 1/8 69-3A /16 1/8 69-3B /16 1/4 69-4A /4 1/8 69-4B /4 1/4 69-4C /4 3/8 69-5A /16 1/8 69-5B /16 1/4 69-5C /16 3/8 69-6A /8 1/8 69-6B /8 1/4 69-6C /8 3/8 69-6D /8 1/2 69-8B /2 1/4 69-8C /2 3/8 69-8D /2 1/ C /8 3/ D /8 1/ D /4 1/ E /4 3/4 MALE RUN TEE Thrd 71-3A /16 1/8 71-4A /4 1/8 71-6B /8 1/4 71-8C /2 3/8 MALE BRANCH TEE Thrd 72-3A /16 1/8 72-4A /4 1/8 72-4B /4 1/4 72-5A /16 1/8 72-6B /8 1/4 72-8C /2 3/8 COMPRESSION FITTINGS-W/SELF ALIGNING CONE SHAPED FERRULES For use with cone shaped ferrules NUT 90 MALE ELBOW 261-A /8 261-B /4 Thrd WH /8 1/ WHD /8 1/8 MALE CONNECTOR Thrd WH /8 1/ WHD /8 1/8 FEMALE CONNECTOR Thrd WHD /8 1/8 13
18 FITTINGS PIPE FITTINGS UNION ELBOW TEE CROSS COUPLING UNION Thrd Desc. 100-A /8 Extruded 100-B /4 Extruded 100-C /8 Extruded 100-D /2 Extruded 100-E /4 Extruded Thrd Desc. 101-A /8 Extruded 101-B /4 Extruded 101-C /8 Extruded 101-D /2 Extruded 101-E /4 Extruded 101F-A /8 Forged 101F-B /4 Forged 101F-C /8 Forged 101F-D /2 Forged 101F-E /4 Forged Thrd Desc. 102-A /8 Extruded 102-B /4 Extruded 102-C /8 Extruded 102-D /2 Extruded 102F-C /8 Forged Thrd 103-A /8 103-B /4 103-C /8 103-D /2 103-E /4 STREET TEE CAP Thrd Desc. 107-A /8 Extruded 107-B /4 Extruded 107-C /8 Extruded 107-D /2 Extruded 107-E /4 Extruded 107F-A /8 Forged 107F-B /4 Forged 107F-C /8 Forged 107F-D /2 Forged 107F-E /4 Forged Thrd 108-A /8 108-B /4 108-C /8 108-D /2 108-E /4 SQUARE HEAD PLUG Thrd 109-A /8 109-B /4 109-C /8 109-D /2 109-E /4 109-H BUSHING Male Thrd Female Thrd 110-BA /4 1/8 110-CA /8 1/8 110-CB /8 1/4 110-DA /2 1/8 110-DB /2 1/4 110-DC /2 3/8 110-EA /4 1/8 110-EB /4 1/4 110-EC /4 3/8 110-ED /4 1/2 110-HB /4 110-HC /8 110-HD /2 110-HE /4 45 FEMALE ELBOW MALE BRANCH TEE Thrd 104-A /8 104-B /4 Thrd 105-A /8 105-B /4 105-C /8 Thrd Desc. 106-A /8 Extruded 106-B /4 Extruded 106-C /8 Extruded 106-D /2 Extruded 106F-C /8 Forged LOCK NUT CLOSE NIPPLE RESTRICTION PIPE ADAPTER.0625 orifice PTF short thread Thrd 111-B /4 111-C /8 111-D /2 111-E /4 Thrd 112-A /8 112-B /4 112-C /8 112-D /2 112-E /4 112-H Male Female Thrd Thd WHD /8 1/8 14
19 PIPE FITTINGS FITTINGS LONG NIPPLE Thrd Length 113A11/ /8 1 1/2 113-A / A21/ /8 2 1/2 113-A / B11/ /4 1 1/2 113-B / B21/ /4 2 1/2 113-B / C11/ /8 1 1/2 113-C / C21/ /8 2 1/2 113-C / C31/ /8 3 1/2 113D11/ /2 1 1/2 113-D / D21/ /2 2 1/2 113-D / D31/ /2 3 1/2 113E11/ /4 1 1/2 113-E / E21/ /4 2 1/2 113-E / H H STREET ELBOW Thrd Desc. 115-A /8 Extruded 115-B /4 Extruded 115-C /8 Extruded 115-D /2 Extruded 115-E /4 Extruded 115F-A /8 Forged 115F-B /4 Forged 115F-C /8 Forged 115F-D /2 Forged 115F-E /4 Forged REDUCING ELBOW SLOTTED HEAD PLUG COUNTER SUNK HEX HEAD PLUG Female Thrd Male Thrd Desc. 115-BA /4 1/8 Extruded 115F-BA /4 1/8 Forged 115F-CB /8 1/4 Forged 115F-DC /2 3/8 Forged Thrd 117-A /8 117-B /4 117-C /8 Thrd 118-A /8 118-B /4 118-C /8 118-D /2 118-E /4 REDUCER COUPLING ADAPTER HEX HEAD PLUG HEX NIPPLE HEX NIPPLE REDUCING 45 STREET ELBOW Thrd A Thrd B 119-BA /4 1/8 119-CA /8 1/8 119-CB /8 1/4 119-DB /2 1/4 119-DC /2 3/8 119-ED /4 1/2 Female Thrd Male Thrd 120-AA /8 1/8 120-BA /4 1/8 120-BB /4 1/4 120-CA /8 1/8 120-CB /8 1/4 120-CC /8 3/8 120-DB /2 1/4 120-DC /2 3/8 120-DD /2 1/2 120-EC /4 3/8 120-ED /4 1/2 Thrd 121-A /8 121-B /4 121-C /8 121-D /2 121-E /4 121-H Thrd 122-A /8 122-B /4 122-C /8 122-D /2 122-E /4 Thrd A Thrd B 122-BA /4 1/8 122-CA /8 1/8 122-CB /8 1/4 122-DB /2 1/4 122-DC /2 3/8 122-ED /4 1/2 Thrd Desc. 124-A /8 Extruded 124-B /4 Extruded 124-C /8 Extruded 124-D /2 Extruded 124-E /4 Extruded 124F-A /8 Forged 124F-B /4 Forged 124F-C /8 Forged 15
20 FITTINGS SAE 45 FLARED FITTINGS FLARE UNION - FEMALE TO FEMALE TUBE COUPLING - SWIVEL FLARE / /2 CONNECTOR - FEMALE TO MALE PIPE Thrd 33-4A /4 1/8 33-4B /4 1/4 33-6B /8 1/4 33-6C /8 3/8 33-8C /2 3/8 UNION TEE MALE BRANCH TEE / / / / /8 Thrd 45-3A /16 1/8 45-4A /4 1/8 45-4B /4 1/4 45-5A /16 1/8 45-5B /16 1/4 45-6B /8 1/4 45-6C /8 3/8 NUT LONG NUT UNION UNION REDUCING /2 41S /8 41S /16 41S /4 41S /16 41S /8 41S /2 41S / / / / / / / / / / / / / / / /4 A B 42R /8 1/4 42R /2 1/4 42R /2 3/8 42R /8 3/8 42R /8 1/2 FEMALE CONNECTOR MALE CONNECTOR Thrd 46-3A /16 1/8 46-4A /4 1/8 46-4B /4 1/4 46-4C /4 3/8 46-5A /16 1/8 46-5B /16 1/4 46-6A /8 1/8 46-6B /8 1/4 46-6C /8 3/8 46-6D /8 1/2 46-8B /2 1/4 46-8C /2 3/8 46-8D /2 1/ D /8 1/2 Thrd 48-2A /8 1/8 48-3A /16 1/8 48-3B /16 1/4 48-4A /4 1/8 48-4B /4 1/4 48-4C /4 3/8 48-4D /4 1/2 48-5A /16 1/8 48-5B /16 1/4 48-5C /16 3/8 48-6A /8 1/8 48-6B /8 1/4 48-6C /8 3/8 48-6D /8 1/2 48-6E /8 3/4 48-8B /2 1/4 48-8C /2 3/8 48-8D /2 1/2 48-8E /2 3/ C /8 3/ D /8 1/ E /8 3/ D /4 1/ E /4 3/4 16
21 SAE 45 FLARED FITTINGS FITTINGS MALE ELBOW 90 UNION ELBOW Thrd 49-2A /8 1/8 49-3A /16 1/8 49-4A /4 1/8 49-4B /4 1/4 49-4C /4 3/8 49-4D /4 1/2 49-5A /16 1/8 49-5B /16 1/4 49-5C /16 3/8 49-6A /8 1/8 49-6B /8 1/4 49-6C /8 3/8 49-6D /8 1/2 49-8B /2 1/4 49-8C /2 3/8 49-8D /2 1/2 49-8E /2 3/ C /8 3/ D /8 1/ E /8 3/ D /4 1/ E /4 3/4 CAP NUT FLARE SEAL PLUG / / / / / / / / / / / / / / / /8 FEMALE ELBOW ADAPTER - SAE 45 FLARE TO INVERTED FLARE Thrd 50-4A /4 1/8 50-4B /4 1/4 50-6B /8 1/4 50-8C /2 3/8 50-8D /2 1/ D /8 1/2 SAE Inverted Male Thrd /8 5/ /8 3/ WHD /4 3/ WHD /4 1/ WHD /8 7/16 MALE RUN TEE ADAPTER - AC TYPE Thrd 51-4A /4 1/8 51-6B /8 1/ D /8 1/2 SAE WHD /4 1/4 45 ELBOW Thrd 54-4A /4 1/8 54-4B /4 1/4 54-5A /16 1/8 54-5B /16 1/4 54-6B /8 1/4 54-6C /8 3/8 54-6D /8 1/2 54-8C /2 3/8 54-8D /2 1/ C /8 3/ D /8 1/ D /4 1/ E /4 3/4 17
22 FITTINGS INVERTED FLARE FITTINGS NUT PLUG UNION TEE - FLARED ALL ENDS FEMALE BRANCH TEE Desc /16 Brass /4 Brass /16 Brass /8 Brass /2 Brass S /8 Steel S /16 Steel S /4 Steel S /16 Steel S /8 Steel S /16 Steel S /2 Steel S /8 Steel S /4 Steel S141-67A* /8 Steel SL /16 Steel - Long SL /4 Steel - Long *3/8" to 11/16-18 Male Thread PL /16 PL /4 PL /16 PL / / / / / / / / / / / / /2 Female Thrd 144-3A /16 1/8 UNION TUBE TO FEMALE PIPE CONNECTOR TUBE TO MALE PIPE ELBOW FLARE TO MALE PIPE 90 FEMALE ELBOW Thrd 146-3A /16 1/ A /4 1/ A /16 1/ B /8 1/ C /2 3/8 Thrd 148-2A /8 1/ A /16 1/ A /4 1/ B /4 1/ A /16 1/ B /16 1/ A /8 1/ B /8 1/ C /8 3/ B /2 1/ C /2 3/ D /2 1/ D /8 1/2 Thrd 149-2A /8 1/ A /16 1/ A /4 1/ B /4 1/ A /16 1/ B /16 1/ A /8 1/ B /8 1/ C /8 3/ C /2 3/ D /2 1/ D /4 1/2 Thrd 150-4A /4 1/ A /16 1/ B /8 1/4 MALE BRANCH TEE Male Thrd 145-3A /16 1/ A /4 1/ A /16 1/ B /8 1/4 45 ELBOW Thrd 154-3A /16 1/ A /4 1/ A /16 1/ B /8 1/ C /2 3/8 18
23 INVERTED FLARE FITTINGS FITTINGS TEE WITH BRACKET REAR AXLE TEE BRAKE ADAPTER Inv.Seat Bolt Hole Bracket /16 (3) 11/32 Angled /4 (3) 11/32 Flat Hose End Inv. Seat Bolt Hole Port WHD /16 (2) 9/32 3/8-24 Inverted Seat Bolt Hole WHD /4 19/32 FEMALE INVERTED RIGID Hose Thrd /4 3/16 3/ /4 1/4 7/ /4 5/16 1/ /16 5/16 1/ /8 5/16 1/ /8 3/8 5/ /2 1/2 3/4-18 INVERTED MALE CONNECTOR MALE SWIVEL 90 ELBOW Hose /16 1/ /8 5/ /16 5/ C /16 3/ /8 3/8 Hose B /4 1/ B /4 5/ /16 5/ C /8 5/ C /8 3/8 1140C- 6* /8 3/8 * NOTE: Chrome Plated DUAL MASTER CYLINDER ADAPTER BUBBLE FLARE MALE TO INVERTED FEMALE Male Thrd Female Thrd WHD /16 3/ /16 3/16 DUAL MASTER CYLINDER ADAPTER INVERTED MALE TO INVERTED FEMALE Male Flare Thread Female Flare Thread 47727* /16 1/2-20 1/4 7/ * /4 7/ /4 7/ * /16 1/2-20 3/16 3/ WHD* /16 1/2-20 5/16 1/ /4 7/ /16 3/ /16 3/8-24 1/4 7/ /16 1/2-20 1/4 7/ /4 9/ /4 7/ /16 1/2-20 3/16 3/ /16 9/ /16 3/ /16 9/ /16 3/ /16 1/2-20 3/16 9/ /16 9/ /16 1/ /16 1/2-20 3/8 5/ /8 5/8-18 5/16 1/ /4 7/ /16 1/ /8 NPT 5/8-18 5/16 1/2-20 * NOTE: Seat on hex face TOWED TRAILER BRAKE TEE A B Male Thrd C WHD /4 (7/16-24) 1/4 (7/16-24) 1/4 inv. (7/16-24) /16 (3/8-24) 3/16 (3/8-24) 3/16 inv. (3/8-24) /4 (7/16-24) 3/16 (3/8-24) 1/4 inv. (7/16-24) /4 (9/16-18) 3/16 (3/8-24) 1/4 inv. (9/16-18) C WHD /16 (9/16-20) 3/16 (3/8-24) 3/16 inv. (9/16-20) /16 (1/2-20) 3/16 (3/8-24) 1/2-20 inv WHD /16 (7/16-24) 3/16 (3/8-24) 1/4 inv. (7/16-24) /16 (9/16-18) 3/16 (3/8-24) 3/16 inv. (9/16-18) 19
24 FITTINGS INVERTED FLARE FITTINGS - METRIC ADAPTERS INVERTED MALE THREAD TO FEMALE THREAD Use S series brake lines Inv. Male O.D Thrd Female Thrd WHD M10 x 1.0 3/16 (3/8-24) FEMALE INVERTED FLARE TO MALE METRIC BUBBLE FLARE THREAD Female Thrd Male Thrd /16 (3/8-24) 13 x /16 (3/8-24) 12 x 1.0 BUBBLE MALE THREAD TO FEMALE THREAD Male Thrd O.D/ Female Thrd WHD M10 x 1.0 3/16 (3/8-24) M11 x 1.5 3/16 (M10 x 1.0) M12 x 1.0 3/16 (M10 x 1.0) M13 x 1.5 3/16 (M10 x 1.0) METRIC BRAKE LINE UNION Japanese line to Japanese line Standard Flare SJ Series Thrd 47934A x 1.0 TOWED TRAILER BRAKE TEE FEMALE STANDARD FLARE TO MALE BUBBLE FLARE TUBE Female Thrd Male Thrd /16 (3/8-24) 3/16 (10 x 1.25) A B Male Thrd C WHD /16 (M12X 1.0) 3/16(3/8-24) 3/16 (M12X 1.0) RING BARB FITTINGS MALE BRANCH TEE UNION TUBE TO TUBE Thrd 972-4A /4 1/ B /8 1/4 O.D / / /2 ELBOW TUBE TO MALE PIPE I.D. O.D. Thrd 969-4A /4 1/ B /4 1/ A /8 1/ B /8 1/ C /2 3/8 CONNECTOR TUBE TO MALE PIPE I.D. O.D. Thrd 968-4A /4 1/ B /4 1/ A /8 1/ B /8 1/ C /2 3/8 UNION TEE UNION ELBOW / / /8 x 1/2 x 3/ / / / /2 20
25 HOSE BARB FITTINGS FITTINGS HOSE BARB TO MALE PIPE HOSE BARB TO SWIVEL FEMALE BALL END Hose I.D. Thrd 125-4A /4 1/ B /4 1/ C /4 3/ A /16 1/ B /16 1/ A /8 1/ B /8 1/ C /8 3/ D /8 1/ B /2 1/ C /2 3/ D /2 1/ E /2 3/ C /8 3/ D /8 1/ D /4 1/ E /4 3/4 MALE PIPE RIGID O.D. Thrd 130-4B /4 1/4 Hose I.D. Thrd 138-3A /16 1/8 HOSE BARB TO FEMALE PIPE HOSE COUPLER - ROUND SHOULDER Hose I.D. Thrd 126-4A /4 1/ B /4 1/ B /8 1/ C /8 3/ D /8 1/ D /2 1/2 Hose I.D. 129R /16 129R /4 129R /16 129R /8 129R /2 129R /8 129R /4 90 ELBOW HOSE BARB TO MALE PIPE SAE 45 FLARE CONNECTOR Hose I.D. Thrd 139-4A /4 1/ B /4 1/ A /16 1/ B /16 1/ C /16 3/ A /8 1/ B /8 1/ C /8 3/ C /2 3/ C /8 3/ D /8 1/ D /4 1/2 SWIVEL COUPLER - HOSE BARB TO FEMALE 45 SAE FLARE Hose I.D /8 5/16 O.D. Thrd /8 3/ /2 1/2 45 ELBOW HOSE BARB TO MALE PIPE BEADED HOSE BARB 90 ELBOW TO MALE PIPE Hose I.D. Thrd 140-8C /2 3/ C /8 3/8 Hose I.D. Thrd 339-8C /2 3/ D /2 1/ C /8 3/ D /8 1/ D /4 1/2 21
26 FITTINGS DUAL BARB HOSE FITTINGS 90 ELBOW MALE PIPE RIGID Hose I. D. Thrd /16 1/ /16 1/ /8 1/ /8 1/4-18 STRAIGHT TUBE RIGID Hose I. D. Thrd /4 3/ /4 1/ /4 5/ /8 3/8 MALE PIPE - NPT Hose I. D. Thrd 725-4A /4 1/ B /4 1/ A /16 1/ B /16 1/ A /8 1/ B /8 1/ C /8 3/ B /2 1/ C /2 3/ D /2 1/ D /8 1/ E /4 3/4 INVERTED MALE SWIVEL Hose I. D. Thrd /4 3/16 3/ /4 1/4 7/ /4 5/16 1/ /16 1/4 7/ /16 5/16 1/ /16 3/8 5/ /8 5/16 1/ /8 3/8 5/ /2 1/2 3/4-18 MALE 45 FLARE MALE PIPE RIGID Hose I. D. Thrd /4 1/4 7/ /4 5/16 1/ /16 5/16 1/ /8 3/8 5/8-18 FEMALE 45 SAE FLARE SWIVEL FEMALE PIPE SWIVEL Swivel nuts are universal - both 37 and 45 connections Hose I. D. Thrd /4 1/4 7/ /4 5/16 1/ * /8 3/8 9/ /2 1/2 3/ /8 5/8 7/8-14 * NOTE: 37 JIC Only Hose I. D /4 1/ /4 5/ /8 3/ /2 1/ /8 5/ /4 3/4 HOSE SPLICER Hose I. D / / / / / /4 FEMALE PIPE SWIVEL Hose I. D. Thrd 40006B /8 3/8 3/ B /2 1/2 1/
27 COLLET STYLE FITTINGS - FOR TRANSMISSION TUBING FITTINGS COLLET MALE CONNECTOR / /32 Thrd A /32 1/ X /32 1/ A /8 1/ X /8 1/ A /16 1/8 NUT ELBOW / /32 Thrd A /32 1/ A /8 1/ X /8 1/16 UNION TRANSMISSION FITTINGS - PARTS KIT / /32 CAB24 Stk For a detailed parts list and many other Parts Kits available please visit our website O-RING STYLE FITTINGS PLUG O-Ring included Hex WH /8 1-1/ WH /4 1-3/4 CAP Hex WH /4 11/ WH /8 13/ WH /2 15/ WH /8 1 1/8 BRAKE LINE UNIONS Thread Desc. Flare Series /8"-24 British line to British line ISO SB MM European line to European line Bubble SC MM For joining Edelmann 6300 series Bubble
28 FITTINGS QUICK DISCONNECTS Industrial Interchange - service pressure rating 300 psi Tectran s Quick Disconnects in the 1/4, 3/8, and 1/2 diameter size are Industrial Interchange and will connect with any other manufacturer s Industrial Interchange of the same diameter. SOCKETS - FEMALE END CONNECTIONS SOCKETS - MALE END CONNECTIONS Nominal Female End A Dim. B Dim. 36C4-4F /4 1/4 NPT C6-6F /8 3/8 NPT C8-8F /2 1/2 NPT Nominal Male End A Dim. B Dim. 36C4-4M /4 1/4 NPT C6-6M /8 3/8 NPT C8-8M /2 1/2 NPT PLUGS - FEMALE END CONNECTIONS PLUGS - MALE END CONNECTIONS Nominal Female End A Dim. 36N4-4F /4 1/4 NPT N6-6F /8 3/8 NPT N8-8F /2 1/2 NPT 2.34 Nominal Male End A Dim. 36N4-4M /4 1/4 NPT N6-6M /8 3/8 NPT N8-8M /2 1/2 NPT 2.44 AXLE TEE Aluminum body BRASS FILTER ADAPTER 1/4 For use on 29-PP4 & 29-PP2 27-F28 Stk Port A Port B /8 3/8 24
29 FITTINGS GREASE FITTINGS Compatible with all common grease guns and hoses STRAIGHT 45 ELBOW Thrd Length GF /8 x GF /8 x GF /4 x GF /4 x GF /4 x GF /4 x Thrd Length GF /4 x GF /8 x STRAIGHT - METRIC 45 ELBOW - METRIC Thrd Length GFM mm x mm GFM mm x mm GFM mm x mm Thrd Length GFM mm x mm GFM mm x mm GFM mm x mm 30 ELBOW 90 ELBOW - METRIC Thrd Length GF /8x27.88 Thrd Length GFM mm x 1 18 mm GFM mm x 1 18 mm GFM mm x 1 19 mm 65 ELBOW GREASE WHIP 90 ELBOW Thrd Length GF /8 x GF /4 x Thrd Length GF /8 x GF /4 x Hose Dia. Length GFW /16 9 GFW /16 12 GFW /16 18 GFW /16 24 GFW /16 36 GFW /16 48 GFW /16 60 DRIVE-IN FIT Thrd Length GF /16.58 GF /16.50 GF /4.50 GREASE FITTING KIT GF100KIT Stk METRIC GREASE FITTING KIT GFM100KIT Stk
30 VALVES FITTINGS BALL VALVE - FEMALE PIPE 2-WAY 3 PORT VALVE Thrd / / / / / / F* * NOTE: Forged DRUM AND BARREL FAUCET Thrd X / X / X / X /4 Thrd G /4 TRUCK VALVES FLARE TO MALE PIPE Thrd B /8 1/ C /8 3/ D /8 1/ D /2 1/ D /8 1/2 HOSE TO MALE PIPE Maximum 250 F 200 psi Hose I.D. Thrd C /8 3/ C /2 3/ C /8 3/ D /8 1/ C /4 3/ D /4 1/2 TUBE TO MALE PIPE GATE VALVE - FEMALE TO FEMALE PIPE Thrd D /8 1/2 Thrd / / /4 FEMALE TO MALE PIPE 200 psi Male Thrd Female Thrd 1115-CC /8 3/ DC /2 3/ DD /2 1/2 26
31 NEEDLE VALVES FITTINGS FLARE TO FLARE 90 - COMPRESSION TO MALE PIPE /8 Male A /4 1/ A /16 1/ B /8 1/4 SAE 45 FLARE STRAIGHTWAY FEMALE PIPE TO FEMALE PIPE Male A /4 1/ B /4 1/ B /16 1/8 Male 3103-A / B / FLARE TO MALE PIPE FEMALE PIPE TO MALE PIPE Male A /4 1/ B /8 1/4 Male 3120-A / B /4 COMPRESSION STRAIGHTWAY MALE PIPE DOUBLE Male A /4 1/ A /16 1/8 Male 3122-A / B /4 COMPRESSION DOUBLE / / /8 VALVE FITTINGS - STEEL HEX NIPPLE CLOSED NIPPLE ADAPTER Thread A Thread B S1022-D /2 1/2 S1022-E /4 3/4 S1022-ED /2 3/4 Thread A Thread B S112-D /2 1/2 S112-E /4 3/4 Female Thrd Male Thrd S120-DD /2 1/2 S120-ED /4 1/2 S120-EE /4 3/4 27
32 FITTINGS DRAIN COCKS EXTERNAL SEAT NEEDLE SEAT Thrd / / / /2 Thrd 242-A /8 242-B /4 242-C /8 INTERNAL SEAT DRAIN VALVE INTERNAL SEAT - LONG Thrd 236-B /4 Thrd Length 242-AL / AIR VENT Set screw has national fine thread INTERNAL SEAT Thrd 237-A /8" Thrd 243-A /8 243-B /4 GASOLINE SHUT-OFF W/ SCREEN FILTER INTERNAL SEAT Hose Male 238-BA /4 1/8 Thrd Length 244-A /8 1.6 EXTERNAL - EXTENDED DRAIN ANGLE BIB DRAIN Thrd 239-B /4 Male 245-A / WHD /4 DRAIN COCK Thrd 241-A /8 241-B /4 241-C /8 241-D /2 28
33 GROUND PLUG SHUTOFF COCKS FITTINGS TRUCK AIR TANK DRAIN COCK MALE PIPE TO MALE PIPE Thrd /4 Thrd 2122-B /4 SAE 45 FLARE STRAIGHTWAY COMPRESSION STRAIGHTWAY O.D. Thrd A /4 1/ B /16 1/ B /8 1/4 O.D. Thrd A /4 1/ A /16 1/8 COMPRESSION TO COMPRESSION MARINE SHUT OFF TO FEMALE PIPE O.D / /16 Male Female 5120-B /4 1/4 COMPRESSION TO MALE PIPE 3-WAY VALE - FEMALE PIPE O.D. Thrd B /4 1/ B /8 1/4 Thrd Stem Length /4 1 3/ /8 1 3/8 FEMALE PIPE TO FEMALE PIPE 4-WAY VALE - FEMALE PIPE Thrd 2103-A / B / C /8 Thrd Stem Length /4 1 3/8 932L /4 2 3/ WHD /8 1 3/ WHD /8 2 3/8 Replacement handle only: 932-HNL Stk FEMALE PIPE TO MALE PIPE Thrd 2120-A / B / C /8 29
34 FITTINGS SPECIAL ADAPTER FITTINGS FORD NUT JIC 37 FLARE TO METRIC O-RING PORT ADAPTER Thrd /4 1/2-20 FORD POWER STEERING FITTING Port WHD /8 (9/16-18) 3/8 (M16X1.5) Inverted Male Thrd A Thrd B WHD / /16-18 METRIC POWER STEERING ADAPTER CARBURETOR TO FUEL LINE ADAPTER O.D. Inv. A Thrd B WHD /8 5/8-18 M14x WHD /8 5/8-18 M16x WHD /8 5/8-18 M18x1.5 O.D. Thrd Male Thrd WHD /4 1/2-20 1/8 MALE JIC 37 O-RING PORT ADAPTER FUEL LINE ADAPTER Inv. Male Male Thrd WHD /2-20 1/8 TRANSMISSION OIL COOLANT LINE ADAPTER Port WH /4 1/ WH /8 3/ WH /2 1/ WH /8 5/ WH /4 3/4 POWER STEERING MALE 37 JIC ADAPTER Inv. Nut WHD /16 5/ WHD /8 3/8 WIPER TEE O.D. Thrd A Thrd B WHD /8 5/8-18 9/ WHD /4 9/ /16-20 Hose I.D WHD /4 30
35 FITTINGS KITS & CABINETS TECTRAN OFFERS BRASS KITS & CABINETS FOR THE SHOP, SHOWROOM AND OUT ON THE ROAD FLOOR AND COUNTER DISPLAYS Description CAB41-BF Counter Spinner Display - 4 sided - Push to Connect Fittings (PL & QL) CAB41-BF Counter Spinner Display - 4 sided - Air Brake Fittings CAB4-BF Floor Spinner Display - 4 sided - & Nylon Fittings CAB4-BF Floor Spinner Display - 4 sided - Hose & Frame Fittings CAB4-BF Floor Spinner Display - 4 sided - Push to Connect Fittings (PL) CAB Large Storage Display Shelf with Bin Boxes MOBILE REPAIR PARTS KITS Description CAB Transmission Fittings CAB /4" Air brake Fitttings for Nylon Tubing CAB /8" & 1/2" DOT Air brake Fittings for Nylon Tubing CAB /4" 3/8" & 1/2" DOT Air brake Fittings for Nylon Tubing CAB Composite Push to Connect Fittings CAB Composite Push to Connect Fittings - Small GF100KIT Standard Thread Grease Fittings GFM100KIT Metric Thread Grease Fittings PROFESSIONAL PARTS KITS Description CAB Brass Fittings Assortment CAB & DOT Fittings CAB Push to Connect Fittings (PL) 12 DRAWER CABINETS Description CAB Brass Fittings Assortment - Small CAB Air brake Fittings CAB Fittings CAB Brass Fittings Assortment - Large CAB & DOT Fittings 40 BIN STORAGE UNITS Description CAB Brass Fittings Assortment - Small CAB Fittings CAB Brass Fittings Assortment - Large 31
36 TUBING HOSE AIR BRAKE TUBING Superior cold weather flexibility and abrasion resistance UV and ozone resistant nylon Designed to operate up to 150 psi in air brake systems Resistant to exposure to gasoline, diesel fuel and commonly used road and cleaning chemicals - Not for use with fuel Operating range: -40 F F Meets or exceeds SAEJ844 (Type A -non-reinforced & Type B -reinforced) Meets or exceeds DOT requirements for use with compression fittings Identified per SAE J844 & FMVSS No. 106 Brake Hoses, 49 CFR AVAILABLE IN BAGS - 50 FT & 100 FT AVAILABLE ON REELS FT+ TUBING REEL HUB 08-P4122R Hub is designed to reinforce the core of TECTRAN's corrugated spools which are used to house our air brake tubing Nominal O.D. Nominal Wall Color Length ft 1/8" 0.023" Black ft T ft ft Black ft 5/32" 0.032" T ft Blue ft Green ft Red ft ft 3/16" 0.035" Black ft T ft ft Black ft T ft ft Blue ft T ft ft Orange ft 1/4" 0.040" T ft ft Green ft T ft ft Red ft T ft ft Yellow ft T ft ft 5/16" 0.040" Black ft T ft ft Black ft 3/8" 0.062" T ft ft Blue ft T ft 32
37 TUBING HOSE AIR BRAKE TUBING Nominal O.D. Nominal Wall Color Length ft Orange ft T ft ft Green ft T ft 3/ ft Red ft T ft White T ft ft Yellow ft T ft ft Black ft T ft ft Blue ft T ft ft Orange ft 1/2" 0.062" T ft ft Green ft T ft ft Red ft T ft ft Yellow ft T ft ft Black ft T ft ft Green ft 5/8" 0.092" T ft ft Red ft T ft Yellow ft ft ft Black ft 3/4" 0.092" T ft ft Green ft T ft NYLON TUBING REPAIR KIT CAB Convenient kit contains 12 pieces of nylon tubing along with union fittings, a handy tube cutter, cable ties and tube clamps all in one place, providing everything needed for the repair of 1/8 through 5/8 OD nylon tubing. HOSE & TUBE CUTTER NYLON TUBING CUTTER SC
38 TUBING HOSE AIR BRAKE HOSE The uniform design consists of interwoven spirals providing greater flexibility and improved twist resistance compared to other spiral designs Layers of the hose wall are fully bonded to enhance kink resistance, enabling tighter bends The rugged elastomeric hose cover is resistant to gasoline, diesel fuel, oil and commonly used road and cleaning chemicals The hose cover may be perforated in some sizes to allow moisture to escape from the reinforcement layer UV and ozone resistant Designed for operating pressures up to 225 psi Operating temperature of -40 F to +200 F (-40 C to +93 C) Designed to provide flexible air-connection from frame to axle or between tractor and trailer where exposed to flexing, pulling or impact Suitable for use with factory-assembled, permanently attached fittings or with field-attachable, reusable fittings Meets or exceeds SAE J Type A Meets or exceeds DOT FMVSS No Brake Hoses, 49 CFR BLACK HOSE Nominal I.D. Nominal O.D. Working Pressure Min. Bend Radius Length T /4" 5/8" /2" 50 ft Carton /8" 3/4" /2" 250 ft Spool /8" 3/4" /2" 100 ft Carton T /8" 3/4" /2" 50 ft Carton /2" 7/8" 225 4" 250 ft Spool /2" 7/8" 225 4" 100 ft Carton T /2" 7/8" 225 4" 50 ft Carton The values listed under Minimum Bend Radius are SAE recommended minimums. The fully-bonded Tectran hose is capable of tighter bends in certain circumstances. Please consult the factory for application suggestions. ARTICFLEX HOSE Cold temperature performance air brake hose Rated at -65 F Meets SAE J1402 Type A Meets or exceeds DOT FMVSS No Brake Hoses, 49 CFR RED/BLUE HOSE Color-coded hose helps minimize incorrect tractor/trailer connections Nominal I.D. Nominal O.D. Working Pressure Hose I.D. Length 1921A /8" 250 ft Spool 1921A /8" 100 ft Carton 1921A-6-T /8" 50 ft Carton 1921A /2" 250 ft Spool 1921A /2" 100 ft Carton 1921A-8-T /2" 50 ft Carton Min. Bend Radius Length Color 13HB /8" 3/4" /2" 250 ft Carton Blue 13HB /8" 3/4" /2" 100 ft Carton Blue 13HB6-T /8" 3/4" /2" 50 ft Carton Blue 13HR /8" 3/4" /2" 250 ft Carton Red 13HR /8" 3/4" /2" 100 ft Carton Red 13HR6-T /8" 3/4" /2" 50 ft Carton Red 34
39 TUBING HOSE AIR COMPRESSOR DISCHARGE HOSE ASSEMBLIES Teflon inner tube Durable stainless steel outer braid Maximum working pressure of 1000 psi Hose Diameters: 1/2 Operating temperatures from -65 F to 450 F DUAL 5/8 45 FEMALE SWIVEL Length 19DSW " 19DSW " 19DSW " 19DSW " 19DSW DSW " 19DSW " 19DSW " 19DSW DSW " 19DSW " 19DSW /8 STRAIGHT TUBE & 5/8 COMPRESSION AIR BRAKE BODY Length 19DY DY " 19DY " 19DY " DUAL 5/8 STRAIGHT TUBE Length 19DT " 19DT " 19DT DUAL 5/8 COMPRESSION AIR BRAKE BODY Length 19DC " 19DC " BULK DISCHARGE HOSE Bulk Hose can be assembled with fittings to desired lengths Extruded smooth inner PTFE core tube prevents carbon accumulation Stainless steel braided outer reinforcement Operating temperature range of -65 F to 450 F Nominal I.D. Nominal O.D. Working Press. Min.Burst Pres.(psi) Min.Bend Radius Length HR14-10-Q /2 5/ /2 25 ft Coil HR /2 5/ /2 100 ft Coil HR14-12-Q /8 3/ /2 25 ft Coil HR /8 3/ /2 100 ft Coil REUSABLE FITTINGS FOR DISCHARGE HOSE STRAIGHT TUBE Hose O.D. 19DS /8 19DS /4 STEEL NUT Hose O.D. 19CN /8 19CN /4 FEMALE SWIVEL Hose O.D. Thrd 19DF-1010* /8 7/ DF-1212** /4 1 1/16-14 * SAE (JIC) 37 ** SAE 45 COMPRESSION Hose O.D. Thrd 19DC /8 13/ DC / BRASS SLEEVE Hose O.D. 19DCS /8 19DCS /4 MALE TAPERED PIPE Hose O.D. Thrd 19DM /8 1/
40 TECTRAN PRODUCTS In addition to our extensive brass catalog, Tectran also offers a full line of Air, Electrical and General products. For a complete listing of Tectran products, please visit our website or call to request a catalog. AIR BRAKE HOSE ASSEMBLIES GLADHAND & ACCESSORIES GLADHAND GRIPS STRAIGHT AIR LINE HOSE ASSEMBLIES AIR VALVES POWERCOILS PLUGS & SOCKETS SWITCHES BATTERY CABLE ASSEMBLIES ABS PRODUCTS POGO STICKS TENDER KITS CLAMPS & CLIPS TARP STRAPS FUEL TANK CAPS & TUBES 36
BRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationPage. Table of Contents. 2 SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4
Table of Contents Page SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 G1212 NYLON AIR BRAKE: G1212 Bulk Tubing...4 G212 RUBBER AIR BRAKE HOSE: G212 & G212L Bulk Hose...5 G212 Hose Assemblies...5
More informationFluid Flow Components Composantes pour un monde fluide
6011 Fluid Flow Components Composantes pour un monde fluide Vancouver Edmonton Winnipeg Toronto Montreal Moncton Product Index BRASS FITTINGS Page Carded...45-46 Closet Bolt...42 Compression...9-12 Compression
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationBRASS HOSE BARBS G21B
BRASS HOSE BARBS For clamshell packaged parts add: PAK to the part number. Eg... G20B-025:PAK, etc. Part Pipe Hose PRICE EACH Pkg Number Size I.D. PAK Loose Std Pkg Qty G2B45 45 MALE NPT HOSE BARB Part
More informationLow-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
More informationVALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS
ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT NEW HOLLAND 73 LOADER NEW HOLLAND TRACTORS MODEL 2WD FWA LESS CAB WITH CAB TT55 X X X TT75 X X X Valve and plumbing kit can be installed
More information$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
More informationTL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationHose & Fittings
Hose & Fittings www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620)
More informationGENE RICH SPECIALTIES
All s Final - No Returns Allowed Attn: Plumbing Specialties Buyers Limited Time for Super Savings on Select Items: Faucets and Supplies Compression Tees and Couplings Dielectric Unions Red, Yellow and
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More informationLubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
More informationtruck and trailer D.O.T. APPROVED FITTINGS, TUBING, CLAMPS AND ACCESSORIES
truck and trailer D.O.T. APPROVED FITTINGS, TUBING, CLAMPS AND ACCESSORIES D.O.T. FITTINGS AND ACCESSORIES Our Versa line stands for quality and value in the world of D.O.T. approved fittings and accessories
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationJones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings
SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe
More information2016 New Product Catalog. Brass Fittings. & Accessories
2016 New Product Catalog Brass Fittings & Accessories Blank Page Inside Front Cover Table of Contents 04-07 Pipe Fittings & Nipples 08-11 Compression Fittings 12-15 Flare Fittings 16-17 Garden Hose Fittings
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationREAD INSTRUCTIONS COMPLETELY BEFORE BEGINNING INSTALLATION
INSTALLATION INSTRUCTIONS Hot Fox In-Tank Fuel Warmer READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING INSTALLATION Models covered by these instructions include: HFG 0-0 HFG 0- SHFT--0- SHH--0 TWHF 0- HFG
More informationShaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560
Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;
More informationWelcome to JDM Industrial Maintenance Inc.
Welcome to JDM Industrial Maintenance Inc. We are an experienced and innovative company which has been serving the City of Peterborough and the surrounding areas since 98. Our diverse skills and resources
More informationQuicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More information4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
More informationShaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last
Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run
More informationSpecial Adapters & Fittings "(BC = Inside Back Cover
Alphabetical Index Product Page No. Air Blow Guns and Accessories.............................................. 61 Air Brake Coil Kits (Tractor Trailers)......................................0 Air Brake
More informationA PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
More information:,Rhino SD/XD G/D 24 Vdc ISO
:,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson
More informationIllustrated Parts List for VMAC System H E
Illustrated Parts List for VMAC System H00001-E 1 Main Assembly... 2 2 Inlet Valve and Compressor System, (90006 & P1002)... 3 Cooler Assembly 900069... 6 Manifold Assembly, 9000... 5 Tank Assembly, 900050...
More informationSpecialty Fluid Fittings
Buyers guide Specialty Fluid Fittings for lubrication systems FEATURING Couplings & s Adapters Compression fittings Check valves Meter and control units bijur.com B r6-06 Buyer's guide to specialty fluid
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationVALVE AND PLUMBING KIT 2408TL LOADER AGCO & MASSEY FERGUSON TRACTORS
ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT 2408TL LOADER AGCO & MASSEY FERGUSON TRACTORS AGCO MASSEY FERGUSON CAB ROPS ST34A 1533 X ST41A 1540 N/A X TRACTOR AND VALVE KIT GENERAL
More informationLubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
More informationPistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible
Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationCNG Frame Mount FSM Parts Manual
CNG Frame Mount FSM Parts Manual Printed December 16, 2016 Rev C Preface Proper installation, service, and repair are important to the safety of the service technician and the safe, reliable operation
More informationParts and Accessories
Parts and Accessories For a full list of available pressure washer parts and accessories, visit www.landa.com. 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Hypro
More informationCAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS
Sec.1 Sec. 10 CAPS & CONNECTORS Vinyl Vacuum Caps Can be used for capping lines and hoses while testing carburetors, emission control systems, vacuum lines etc. Color coded for size identification. Fits
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationD. S. HULL COMPANY, INC
PVC Slip x Female Pipe Adapters Mfg Slip Female Pipe 235736 435-005 1/2 1/2 $0.81 235747 435-007 3/4 3/4 $1.03 235758 435-010 1 1 $1.18 235769 435-012 1-1/4 1-1/4 $1.84 235770 435-015 1-1/2 1-1/2 $2.11
More informationSECTION FIVE INDUSTRIAL LUBRICATIONFITTINGS
INDUSTRIAL LUBRICATIONFITTINGS Threaded/Drive Carbon Steel/Monel/Stainless Steel Standard/Metric Specialty Vents/Breathers Couplers Accessories 82 Alemite Product Catalog As the inventor of the Zerk fitting,
More informationAUTOMOTIVE HOSE G611 FUEL LINE. Tube: Smooth, black, oil and gasoline resistant nitrile rubber.
& Truck HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures
More informationTECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4
Page 1 of 5 Model F Dry Valve with Trim Valve Size Part Number 3 13764PTR 4 13765PTR 6 13766PTR Standard Trim Sets include galvanized nipples and fittings. 4 Dry Valve Shown General Notes: Notes: For use
More informationSelf Cleaning Suction Screen
Effective 1/1/09 WATERMASTER Self Cleaning Suction Screen All galvanized construction with a heavy duty steel body with #3 expanded metal steel lid covered by #8 mesh, 20 gauge stainless cloth screen.
More informationSALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT
= SALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT INSTALLATION MANUAL: 2005-09 Mustang 4.6L 3V P/N: 10-8002-C12000B KIT P/N: 10-2903-B11511* Saleen Performance, Inc. 1225 East Maple Rd. Troy,
More informationASSEMBLY MANUAL. Keep With Operator s Manual
ASSEMBLY MANUAL Keep With Operator s Manual 2-6347 VALVE AND PLUMBING KIT INSTRUCTIONS SMC 64Q LOADER KUBOTA TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB B2150DT & B2150HSD X X B8200DT & B8200HSD X X B9200DT
More informationCatalog Pnuematic Couplings
Industrial Interchange Nipples A-A-59439, MIL- C-4109F Design Non-valved, straight through Pioneer Industrial Interchange Nipples are compatible for use with 20 Series, HF Series, Universal or E-z-mate
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationMur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
More informationChecked by Revised by
Illustrated Parts List for VMAC System V900114 2012-2010 25-3500 DODGE 4X4 Pickup & 3500 Cab & Chassis 6.7L Cummins Diesel System V900116 2012-2011 45-5500 Cab & Chassis 6.7L Cummins Diesel 1. Kit Pack
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationVALVE AND PLUMBING KIT INSTRUCTIONS SMC 84Q & 2408 LOADERS NEW HOLLAND TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB 1720 X X X 1920 X X X
ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT INSTRUCTIONS SMC 84Q & 2408 LOADERS NEW HOLLAND TRACTORS MODEL 2WD 4WD LESS CAB WITH CAB 1720 X X X 1920 X X X TRACTOR AND VALVE KIT GENERAL
More informationComplete Systems & Parts Automatic Oiler & Grease Bank MADE IN THE USA
Complete Systems & Parts Automatic Oiler & Grease Bank MADE IN THE USA Lubrication Systems contents Lube Minder Automatic Oiler Why Lube Minder?..4 Lube Minder Parts and Pictures....6-7 Understanding the
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800)
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031 Parts List for: Form No. 108184 RSST-20 Internet
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationEaton Weatherhead Agriculture Parts Guide
Eaton Weatherhead Agriculture Parts Guide EATON WEATHERHEAD AGRICULTURE PARTS GUIDE This parts guide contains popular Eaton Weatherhead hoses, fittings, adapter and couplings important to your farm equipment
More informationAIR HOSE / COUPLERS Air Hose / Couplers For Use with 3538, 3539 ColorConnex Green Coupler Type B, 1/4 in MNPT
3536 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in FNPT 3541 For Use with 3543, 3544 ColorConnex Blue Type C, 1/4 in FNPT 3537 For Use with 3538, 3539 ColorConnex Green Type B, 1/4 in MNPT 3542
More informationBIN ASSORTMENTS GRADE 5 USS ZINC PLATED-#LA100 GRADE 8 USS ZINC PLATED-#LA102 5/8 USS NUTS 9/16 USS NUTS 9/16 FLAT WASHER 5/8 FLAT WASHER
BIN ASSORTMENTS GRADE 5 ZINC PLATED-#LA100 GRADE 8 ZINC PLATED-#LA102 1/4 5/16 3/8 7/16 1/2 9/16 5/8 1/4 thru 5/8 Hex Nuts, Flat Washers, Lock Washers, & Cap Screw Assortment 1/4 FLAT 5/16 FLAT 3/8 FLAT
More informationRetrofit Kit and Replacement Component Guide. Revision M, February 8, 2018
Retrofit Kit and Replacement Component Guide Revision M, February 8, 2018 Aeris Retrofit Kit Part Numbers Aeris kits are designed to work with a broad range of trailers and wheel configurations and the
More informationSec. 11 NYLON CONNECTORS
Sec. 11 NYLON CONNECTORS 12946 Connector 5/16" x 5/16" 1/8 1/8 12916 12919 12921 12938 Connector 3/8" x 1/4" 1/8 12924 1/4" 12934 Connector 3/8" x 3/8" 18835 (E1ZE-9E499-EA) Nylon 1/8 12926 17629 12922
More informationBRAKES. Air Brake Modifications DURASTAR SERIES BODY BUILDER BRAKES FEBRUARY 2015 PAGE 159 ALL MODELS - AIR BRAKE MODIFICATIONS
BRAKES ALL MODELS Air Brake Modifications Certification Procedures For DOT FMVSS-121 The Federal Department of Transportation's Motor Vehicle Safety Standard 121 required that virtually all trucks equipped
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More information1/8" One Way Shut-Off 2 Series
1/8" One Way Shut-Off 2 Series S S FE 1/8 FPT 23-2 2302 1/4 FPT 27-2 2702 1/8 MPT 22-2 2202 1/4 MPT 24-2 2402 1/8 I.D. 02-2 2022 3/16 I.D. 03-2 2032 1/4 I.D. 04-2 2042 SELF STORING AIR HOSE 1/4 I.D. 1502
More informationWE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL C ELECTRIC HYDRAULIC PUMP
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More informationAIR / ELECTRICAL COILS & ACCESSORIES CATALOG
RoadChoice.com AIR / ELECTRICAL COILS & ACCESSORIES CATALOG Table of Contents AIR COILS Air Brake Coils...................... 3 Air Brake Coils Brass Handles......... 3 Cab Blower Kit......................
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationFlat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
More informationMacro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
More informationSnap-tite E / EA-Series
Snap-tite E / EA-Series eneral Purpose and Vacuum Couplings eaturing... Snap-tite quality with superior pressure and flow characteristics over the competition. Snap-tite's EA Series quick disconnect coupling
More informationSection H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.
More informationfunnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
More informationHANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL
PRO SERIES SPRAYING SYSTEMS NO. AA18-AL HANDGUNS 3PT SKID HEAVY DUTY TYPE ROTATING HANDLE CONTROL Handle rotates 360 to operate spray gun valve from shutoff to maximum flow position. As handle is turned,
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationAUTOMOTIVE HOSE G611 FUEL LINE. Part Working Weight PRICE PER FOOT Standard Length I.D. Number O.D. Pressure per ft Cut Coil Reel Coil Reel
AUTO & TRUCK HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures
More informationPARTS LIST ROOFERS CONVEYOR
PARTS LIST ROOFERS CONVEYOR TABLE OF CONTENTS ROOFERS CONVEYOR PAGE 2 & 3 ARTICULATING JOINT PAGE 11 HYDRAULIC CIRCUIT P..".8-9.55Y. PAGE 4 & 5 CONE ROLLER ARTICULATING JOINT PAGE 12 H-FRAME PAGE 6 ARTICULATING
More informationBALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
More informationLUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationIllustrated Parts List for VMAC System V90G120
Illustrated Parts List for VMAC System V90G120 Ford 2015-2011 F250-F550 6.7L Power Stroke Diesel 1 - Kit Pack List... 2 2 - Fastener Pack, V90G120, 3800843... 5 3 Compressor, Assembly, AUS, P120140...
More informationVALVE AND PLUMBING KIT 2409 LOADER CUB CADET & KIOTI TRACTORS
ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT 2409 LOADER CUB CADET & KIOTI TRACTORS TRACTOR MODELS CUB CADET 8404, 8454 KIOTI DK45, DK50 ROPS X X TRACTOR AND VALVE KIT GENERAL INFORMATION
More informationCar Wash / Pressure Washer
Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask
More informationPARTS & ASSEMBLY DRAWINGS SECTION 1. Jacket
000SVRM-3 /7 CONTROL VALVE PARTS & ASSEMBLY DRAWINGS SECTION Base Valve O-ring O-ring Sleeve Cage/Barrier Assembly Spacer Jacket Description 2 Valve 3 Valve Base Valve, 0-40 psi 2255-000 2239-0090 Base
More informationUSA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Fluid Power Solutions E715 V5 (8/17)
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fluid Power Solutions E715 V5 (8/17) LAWSON PRODUCTS' FLUID POWER SOLUTIONS Hydraulic Hose Systems Cut Your Hose Costs 50% by Making
More informationINSTALL MANUAL. FOR ON LINE ORDERING- E Commerce Visit Our Website
INSTALL MANUAL FOR ON LINE ORDERING- E Commerce Visit Our Website WWW.PRESSUREGUARD.COM Contact Information Technical Support: Chris@pressureguard.com Sales Support: Sales@pressureguard.com By Phone: 615-227-6024
More informationBeverage Master Parts List. Part 8 of 13: Fittings. Issued: March 9, Toll Free:
Beverage Master Parts List Issued: March 9, 2012 Part 8 of 13: Fittings Our most popular fittings are shown in this section, but many other fittings are available. If you don t find what you are looking
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationPB18-G Series Portable Pump Service Parts List
Document Number Issue Date 01/24/07 Rev. Date 7/28/16 PB18-G Series Portable Pump Service Parts List Component Pump Pump Model (Located on Serial Plate) PB18-G2015B PB18-G2015F Exploded View See Page Cross
More informationRecoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION
Polyurethane Recoil Hose Greater durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics Longer life expectancy due to kink resistant properties Superior recoil memory due
More informationBuild the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
More informationProduct Information. Brass Manifolds. Version A
Product Information Brass Manifolds Version A Introduction Infloor offers a complete line of brass manifolds for radiant heating applications. This guide explains the how the manifolds work, the setup
More informationForm No Parts List for: MODEL B HYDRAULIC PUMP GENERAL SECTION PG PG553-2UK FT600 PG554. PG120A Series Y70G Series. Sheet No.
MODEL B HYDRAULIC PUMP GENERAL SECTION Parts List for: Form No. 100520 60208 PG553 65820 PG553-2UK FT600 PG554 FT700-001 PG554-LEAD FT700-002 PG554-2UK PG55A Series Y26G Series PG90A Series Y60G Series
More informationOPERATOR S MANUAL. To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit
OPERATOR S MANUAL MODEL ORDER # MODEL HD 2.0/10 Ed 1.575-250.0 DE-201007D HD 1.9/15 Ed 1.575-251.0 DE-201507D HD 2.8/10 Ed 1.575-252.0 DE-301007D HD 3.5/20 Ea 1.575-253.0 DE-352007A To locate your local
More informationSec. 13 Y CA BLE & HAR NESS
OIL DRAIN PLUG GAS KETS Sec. 13 Y CA BLE & HAR NESS Steel With Rubber Seal Oil Drain Plug Gaskets Auveco Thick- Unit Part No. I.D. O.D. ness Pkg. 16026...1/2"...1"...3/64"...5 18299...14mm...25mm...1mm...10
More information