M H Industrial Supply Sdn. Bhd. Air Hose. Bulk Materials Suction Hose. 1 of 38
|
|
- Joan Hutchinson
- 5 years ago
- Views:
Transcription
1 M H Industrial Supply Sdn. Bhd. Air Hose Bulk Materials Suction Hose 1 of 38
2 2 of 38
3 Eagle 200 Air Hose Eagle 300 Air Hose 3 of 38
4 4 of 38
5 Fuel Hose Fuel Hose (Outer Braided) 5 of 38
6 LPG Hose 6 of 38
7 Multi Purpose Hose 7 of 38
8 Oil Discharge Hose Oil Hose 8 of 38
9 9 of 38
10 Oil Suction Hose Plaster Hose 10 of 38
11 Premium Radiator Hose Radiator Hose 11 of 38
12 12 of 38
13 Sand Blast Hose Single-Line Welding Hose 13 of 38
14 Suction Hose Twin Welding Hose 14 of 38
15 15 of 38
16 Ultra Air Hose Tyre Master Air Hose 16 of 38
17 Ultra Water Discharge Hose Water Discharge Hose 17 of 38
18 18 of 38
19 Water Suction Hose XCEL Air Hose 19 of 38
20 HYDRAULIC HOSE GH 663 SINGLE WIRE BRAID MEETS DIN TYPE 1SN EXCEEDS SAE 100R1AT PERFORMANCE HI-IMPULSE CONSTRUCTION: Synthetic rubber tube, single wire braid reinforcement and synthetic rubber cover. APPLICATION: Hydraulic system service with petroleum and water-glycol base fluids, for general industrial service. for more information on specific fluid applications and high temperature ratings. OPERATING TEMPERATURE RANGE: -40 F to+212 F (-40 C to +100 C) HYDRAULIC HOSE GH of 38
21 Brand AEROQUIP DOUBLE WIRE BRAID MEETS OR EXCEEDS DIN TYPE 2SN, EXCEEDS SAE 100R2AT PERFORMANCE HI-IMPULSE CONSTRUCTION: Synthetic rubber tube, double wire braid reinforcement and synthetic rubber cover. APPLICATION: Hydraulic system service with petroleum and water fluids, for general industrial service. for more information on specific fluid applications, and high temperature ratings. OPERATING TEMPERATURE RANGE: -40 F to +212 F (-40 C to TO 100 C) HYDRAULIC HOSE 2755 (4SP) APPLICATION: High pressure hydraulic systems with petroleum and water-glycol base fluids, for lubricating oils, and water. CONSTRUCTION: Synth. NBR rubber tube 4-spiral wire reinforcement synth. CR rubber cover. HYDRAULIC HOSE GH506 (4SH) 21 of 38
22 APPLICATION: High pressure hydraulic systems with petroleum and water-glycol base fluids, for lubricating oils, and water. CONSTRUCTION: Synth. NBR rubber tube 4-wire spiral reinforcement synth. CR rubber cover. FC300 HIGH TEMPERATURE HOSE SINGLE WIRE BRAID EXCEEDS SAE 100R5 CONSTRUCTION: AQP elastomer tube, polyester inner braid, single wire braid reinforcement and blue polyester braid cover. APPLICATION: Hydraulics handling petroleum base fluids and air, gasoline, fuel and lubricating oils, fire resistant hydraulic fluids and other industrial fluids. For more information on specific fluid applications and high temperature ratings. OPERATING TEMPERATURE RANGE: -55 F to +300 F (-49 C to +150 C). Except air +250 F (+121 C) Fittings 22 of 38
23 HYDRAULIC FITTINGS -Mild steel fittings -Stainless steel fittings -One piece pre -crimped hose fittings Ferrule -Mild steel ferrule -Stainless steel ferrule Adapter -Mild steel hydraulic adapter -Stainless steel hydraulic adapter 23 of 38
24 Tube Fitting -Mild steel hydraulic tube fitting -Stainless steel hydraulic tube fitting Stainless Steel 316 Tube -Stainless steel 316 double-ferrule tube fitting 24 of 38
25 Stainless steel Flexible Hose HOSE SPECIFICATIONS OUTER BRAID : One or two layers of SS 304 braid acting as reinforcement. INNER TUBE : SS 321 annular corrugated tube.other material SS 304,SS 316L, Monel 400, Inconnel,etc, are also available. TEMPERATURE RANGE : -200 C to 600 C FITTINGS : Flanges and threaded fitting are argon welded and the assemblies are tested to 1.5 times working pressure. APPLICATION : Hot air, steam, hot oil, exhaust, absorb pump vibration, tank settlement etc. Expansion Joint SPECIFICATIONS I)Stainless steel inner liner can be added as option to provide smooth flow. II)Sizes above 300 mm dia. & length other than the standard 305 mm is available on request. III)End connections other than flanges is available on request. IV)Standard bellow material is SS 316. V)Working temperature up to 600 degree C 25 of 38
26 Rubber Bellow -High pressure expansion joint -Rubber expansion joint -Fabric expansion joint PVC Spring Hose This hose is transparent and fluid can be seen. It has superior pressure resistance due to the reinforced strings. TEMPERATURE RANGE : ( 0 C to +60 C ) PVC Hinet hose This hose is transparent and fluid can be seen. It has superior flexibility and easy to handle. TEMPERATURE RANGE : ( 0 C to +60 C ) High Pressure Spray Hose More flexible,light weight than rubber hose and easy to handle. TEMPERATURE RANGE : ( 0 C to +60 C ) 26 of 38
27 PVC Duct Hose this duct hose is made of a smooth bore flexible pvc ducting reinforced with an external rigid pvc helix all round.most ideal for conveying air,liquid,dust and light-weight powders and granular substances.this pvc duct hose is highly recommended for use in air ventilation,air and fume exhaust delivery and dust collection purpose. TEMPERATURE RANGE : ( 0 C to +60 C ) PU Duct Hose Lightweight and highly flexible polyurethane duct hose reinforced with rigid material helix.minimum frictional loss achieved by smooth bore.offers considerably longer life than pvc ducting with it high abrasion resistance and durability strength 27 of 38
28 Black Cotton Fabric Wire Reinforce Duct Hose APPLICATION :Moving air and transporting dust,fumes,smoke,and odors,it is ideal for shipyard venting application. CONSTRUCTION:Flexible,durable,lightweight,strip -wound,polyester fabric coated on both sides layers of neoprene and reinforced with a carbon-steel wire helix,provide superior chemical and abrassionresistance. TEMPERATURE RANGE :( -40 C to +125 C ) WT-Type Light weight and flexible hose reinforced with a rigid pvc helix. Corrugated outer surface provides high flexibility and small bending radius. Smooth inner bore provide optimum material flow. APPLICATION: Extensively used in industrial and agriculture applications for pumping and transferring needs. Suitable for conveying liquid,powder and granular material.excellent corrosion-proof protection for cable conduit and underground piping. Excellent flexibility, Light weight and small bending ra dius for space constraint applications. TEMPERATURE RANGE : ( 0 C to + 65 C ) Medium Duty PVC Oil Suction Hose Heavy duty pvc hose reinforced with an integral crush-resistant pvc helix.optimum flow is maintained by smooth bore.tough and extremely durable under normal operating conditions. Sunny Delivery Hose 28 of 38
29 Superior in flexibility that allows compact piping. Majority purpose for deliver water. TEMPERATURE RANGE : ( 0 C to + 60 C ) Aluminium Semi Rigid Duct A bendable semi flexible pure Aluminium duct,suitable for low / medium pressure H.V.A.C. and exhaust systems.standard SEMI DUCT is supplied in 6 meters length,which is compressed to 800mm for ease of transport and storage. TEMPERATURE RANGE : ( -30 C to C ) Composite Hose Light and flexible composite hoses are made from multi layers of polypropylene films and fabrics reinforced internally and externally by high tensile steel wire helix.all end connections are externally swaged with HD steel ferrule providing full electrical continuity. 29 of 38
30 PVC Oil Tubing (Transparent) -SIZE 3.2 mm x 1.75 mm x 30 mtr 4.0 mm x 1.75 mm x 30 mtr 4.8 mm x 2.00 mm x 30 mtr 5.6 mm x 2.00 mm x 30 mtr 6.4 mm x 2.25 mm x 30 mtr 8.0 mm x 2.25 mm x 30 mtr 9.5 mm x 3.00 mm x 30 mtr 11.0 mm x 3.20 mm x 30 mtr 12.5 mm x 3.5 mm x 30 mtr P2PU,P5PU SPECIFICATIONS CONSTRUCTION :Transparent polyurethane,odourless REINFORCEMENT :Encapsulated steel wire helix APPLICATION :Suitable for conveying highly abrasive powder,wood chip,grains,etc. TEMPERATURE RANGE : (-40 C to +100 C ) Camlock MATERIAL :SS 316, ALUMINIUM, BRASS, PP, Other material on request. PE,PU,Nylon Tubing 30 of 38
31 MATERIAL :POLYETHYLENE TUBE -Poly tubing is manufactured from F.D.A. approved resins.it has very low moisture adsorption, It is fungus resistant, non-corrosive,and highly resistant to stress crack. It is suitable for air and water application and us used for beverage and soda transfer. MATERIAL :POLYURETHANE TUBE -Polyurethane tubing is specially formulated for use with gasoline.it is yellow tinted, light weight,flexible in cold temperatures,resistant to oil,grease,ozone and will not flake. MATERIAL : NYLON TUBE -Nylon tube has high mechanical properties,extremely high pressure rating and a wide temperature range.the loss of mechanical strength at elevated temperatures is much less than with other types of plastic tube.it retains its flexibility at sub-zero temperatures. -Nylon tube us odorless, tasteless, non-toxic,fungus and corrosion resistant,readily sterilized in steam or boiling water. Thus, fatigue resistance to bending is very great. Push In Fitting FEATURES -Functinal One Touch design instantly facilitates a simplified connecting and disconnecting of the tube. -Elliptical sleeve configuration allows convenient pneumatic installations in a confined space. -Simple manual pressure on the elliptical sleeve results in an instant disconnection of the tube -Nickel-plated brass body provides resistance against the corrosion and contamination over time while maintaining the stylistic apperance -thread is pre-applied with teflon and does not require any additional sealing materials. Brass Fitting -Compression brass fitting -Metric compression brass fitting 31 of 38
32 Pneumatic -Air filter series -Air regulator series -Air lubricator series -Air filter + regulator series -Air filter + regulator + lubricator series Pipe Clamp -Standard pipe clamps -Standard pipe clamps c/w cover plate -Heavy range pipe clamps -Twin pipe clamps Stainless Steel Hose Clips MATERIAL : Stainless steel hose clip 80% Stainless steel hose clip 100% Universal Hose Clamp Torque values for clamps are based on dry bolts.the use of lubricant on bolts will adversely effect clamp performance. 32 of 38
33 33 of 38
34 Hand Oetiket Clip (OTK CLIP) FEATURES: -Zinc-plated. -Compact one-piece clamp. -Fast and simple installation with pincer. -Visible deformation provides evidence of proper closure. Wire Band Super Clamp Galvaniwed Steel & Stainless Steel MATERIAL : Galvanized steel zinc color plated,one bolt with solid mandrel Stainless steel, one bolt with hollow mandrel 34 of 38
35 Wire Hose Clip MATERIAL : Galvanized steel Industrial Gauges WIKA s industrial series stainless steel pressure gauges are designed for the oil and gas, alternative fuels, chemical manufacturing, petrochemical and mobile hydraulics industries. They are available in a variety of mounting configurations, dry or liquid filled and are designed for long and reliable service under severe conditions. Commercial Pressure Gauge Bending Tubing 35 of 38
36 Fuel Pipe The fuel injection pipes,diesel fuel injection pipes,oil fuel injection pipes available with us is manufactured using seamless steel tubes,nozzles and other components. Copper Tubing MATERIAL : Copper tubing 36 of 38
37 Stainless Steel Tubing MATERIAL : Stainless steel tubing BRAND : Sanko Hydraulic Tubing MATERIAL : Carbon steel tubing BRAND : Sanko O Ring Kit O-rings & kits Seal kit WE SPECIALIZE IN: -Oil seals -Hydraulic seals -Pneumatic seals -Industrial seals 37 of 38
38 -Floating seals -Double acting seals -Piston rings -Vee packings M H Industrial Supply Sdn. Bhd. No. 51, Jalan Goh Hock Huat, 41400, Klang, Selangor, Malaysia Tel Fax mhindsupply@gmail.com 38 of 38
QUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
More informationSingle Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover
SECTION 1 SAE100R1 Page 6 SAE100R2 Page 6 SAE100R2XP Page 7 SAE100R2GP Page 7 Quick Reference Taipan Hose Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover SAE100R2H
More informationFOOD & BEVERAGE HOSE
FOOD & BEVERAGE 7 Hoses all require a tube that will not contaminate the food product being conveyed. In the same way that rubbers and thermoplastics are formulated to handle different chemicals, gases
More informationHOSE & CLAMPS HOSE & CLAMPS
15 HOSE & CLAMPS Hose & Clamps 141 Oil and Petroleum Hose :: 15.1 Petrol & Oil Suction Hose TUBE: black, static conducting, nitrile rubber. REINFORCEMENT: high tensile textile cords and multiple helix
More informationFlexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake
INDEX Section Pages Hose Section 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Pages Section Pages Swivel Joints 229-244 Quick Disconnect Couplings 268-345 Flexmaster Joints 245-260 Access.,
More informationDOCK & BARGE HOSE PRODUCTS
DOCK & BARGE HOSE PRODUCTS PE52 DOCK-FLEX CORRUGATED BARGE DOCK HOSE Flextral PE52 is a heavy duty oil suction and discharge (OS&D)/dock hose for transferring oil between tankers, barges, and storage tanks.
More informationUniflex is the first in India to manufacture hose assemblies using pallet swage fittings.
Universal Flexibles Pvt. Ltd. is involved in the manufacture of top of the line quality Hydraulic Assemblies having commenced operations at Bangalore in 1987. Tradition of excellence Uniflex is the first
More informationDUCTING: U-01 MATERIAL HANDLING ANTI STATIC CUSTOM MADE DUST FUMES
MATERIAL HANDLING CUSTOM MADE ANTI STATIC FUMES DUST 228 230... PVC CLEAR PVC BLUE 231... TPR FRS FLEXAUST HT 232... VOLCANO PU-R VOLCANO PU-M VOLCANO PU-H 233... EOLO PU EOLO PU A/S 234... EOLO TR TUFLEX
More informationClamps. for Plastic Tubing & Hose. Fluid Transfer Specialists
Clamps for Plastic Tubing & Hose Fluid Transfer Specialists Oetiker Clamps Ear Type Clamps Oetiker ear type clamps breathe and adapt to the expansion and contraction of hose affected by thermodynamics
More informationINDUSTRIAL HOSES 1
INDUSTRIAL HOSES 1 WATER HOSES LONG-SU 6 BAR Gardening and general water discharge services. Temperature range: -25 C / +70 C. Tube: NBR/SBR / Natural and synthetic rubber. Cover: SBR, weather and abrasion
More informationHOSE & HOSE PROTECTION
ALL YOU CAN EXPECT AND MORE Think about Hydraulics Differently Quality European Hose SECTION A HOSE INDEX 1 Hydraulic Hose HOSE & HOSE PROTECTION 1SN - SAE R1 AT - 1 Wire Thin Cover Hose 1SN - 1 Wire Thin
More informationUni-chem Standard Chemical Service
Standard Chemical Service PG, PS, SG and SS composite hoses are specifically designed for in-plant liquid transfer operations as well as tank truck delivery and rail car loading. Constructed with multiple
More informationHOSE - OIL/CHEMICAL & GENERAL PURPOSE
HOSE - OIL/CHEMICAL & ENERAL PURPOSE A430 - Oil Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: - DB15 Designed for suction and discharge use on various petroleum
More informationProducts & Information
Dayco Style DR6 Hydraulic Hose Meets SAE 100R6 - page 1. Designed for use as a low pressure hydraulic line, flexible fuel line, power steering return line, and lubrication line. Dayco s Style DR6 Hydraulic
More informationHOSE (4673) Fax
PETROLEUM Product EW160 EW353 EW499 (X)SP100 SP204 SP353 SS106 SS107 SS110 SS131 SS145 SS160 SS242 SS254 SW303 SW309 SW327 SW333 SW353 SW355 SW387 SWC316(R) SWC509 SWC609(R) Page 53 59 53 54 54 54 55 55
More informationHose & Hose Clamps. EPDM Rubber Pressure Hose. Hose & Clamps. EPDM Rubber Hose
Need a hose to transfer liquid, dry material, dust, or fumes? We have hoses for almost every material and application, featuring Parker, Sun-Flow, and Flexaust from 1/8 to 8 diameter. Make sure the hose
More informationHose - Oil, Chemical & General Purpose
A430 - Oil Suction and Delivery Hose 10 bar Designed for suction and discharge use on various petroleum products with upto 50% aromatic content, whether in plant or on tankers. Is suitable for handling
More informationPETROLEUM & OILFIELD HOSE
PETROLEUM & OILFIELD HOSE 4 FUEL DISPENSING HOSE Gasoline & diesel hose for fuel line & filler necks can be found in Automotive and Marine Sections Petroleum Hoses are divided into: Fuel Dispensing for
More informationThermoplastic Hose Quick Reference Guide
Thermoplastic Hose Quick Reference Guide 4703 4700 SAE 100R3 SAE 100R7 Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System Pilot Lines and Joystick Controls General Hydraulics
More informationWelcome to JDM Industrial Maintenance Inc.
Welcome to JDM Industrial Maintenance Inc. We are an experienced and innovative company which has been serving the City of Peterborough and the surrounding areas since 98. Our diverse skills and resources
More informationsales@plascorp.com.au www.plascorp.com.au Plascorp Pty Ltd is one of Australia s leading privately owned Manufacturing and Distribution Companies. Our product range comprises PlasticoatTM Industrial ducting,
More information52 INDUSTRIAL HOSE. Biofuel Petroleum Suction & Discharge Hose. T650AH 150 PSI Oil Discharge Hose PETROLEUM HOSE INDUSTRIAL RUBBER HOSE"
52 INDUSTRIAL HOSE Biofuel Petroleum Suction & Discharge Hose For suction and discharge applications in truck and tank car transfer of gasoline, oil and Biofuels - up to E98 and B100 (T629 is not recommended
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting Hose, Tubes & Ducting 326 Together, we can power your business into the future Parker and Brammer: a partnership that brings your business the technologies, experience and international
More informationThermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
More informationJ-FLEX HYDRAULIC HOSE SOLUTIONS
Your Hose & Fitting Connection J-FLEX HYDRAULIC HOSE SOLUTIONS ww.jgbhose.com JGB Headquarters 115 Metropolitan Dr. Liverpool, NY 13088 (315) 451-2770 Buffalo Branch 2540 Walden Ave. Cheektowaga, NY 14225
More informationAeroquip BRUISER FC735 FC736 FC839B FC273B FC849B FC606B. Abrasion-Resistant Polymer-Covered Hose
Aeroquip BRUISER Abrasion-Resistant Polymer-Covered Hose FC735 FC736 FC839B FC273B FC849B FC606B FC735 BRUISER Double wire braid Exceeds DIN 20 0022 Type 2SN HI-IMPULSE at 1/2 SAE bend radius FC735-04*.25.57
More informationWater Suction Hose. Temperature Range: -32 C to +82 C (-25 F to +180 F)
Industrial Hose : Page: Flow MAXX Water Suction 1 EDPM Water Suction 1 PVC Water Suction & Discharge Heavy Duty 2 PVC Water Suction & Discharge Standard Duty 2 Tigerflex Type J PVC Hose 3 Tigerflex Type
More informationNorwesco Industries (1983) Ltd.
Silicone Heater & Rad Hose Silcone Auto Heater Application:A high temperature heater hose used in hostile engine environments, or other industrial applications where temperature is a factor. Meets SAE
More informationNiagara Orinoco Vibrator Volga Shannon 80 Volga fra. Material handling hose. Abr
Abr Niagara Orinoco Vibrator Volga Shannon 80 Volga fra Material handling hose Abr 56 Abr Niagara :,,. : -40 (-40 F) +70 (+58 F) :,,, SBR/NR,. :. :,, SBR/NR,. : DIN 5356 70+/- 5 mm 3 : IVG Abr : Niagara
More informationTubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel
Tubing & Hose Metric Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Available in a variety of different types to suit a wide range of applications
More informationPage ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
More informationOS10 OIL SUCTION AND DELIVERY HOSE
OS10 OIL SUCTION AND DELIVERY HOSE RECOMMENDED FOR OIL, HYDRAULIC AND PETROLEUM BASED FLUID, SUCTION AND DELIVERY WITH UP TO 55% AROMATIC CONTENT. Tube : Black, smooth conductive NBR compound. Reinforcement
More informationPF Series Thermoplastic Non-Spill Couplings and Industrial Hose Products
PF Series Thermoplastic Non-Spill Couplings and for Bulk Chemical and Fluid Transfer Bulletin 3800-PF August, 2004 PF Series Non-Spill Quick Couplings Parker PF Series non-spill couplings virtually eliminate
More informationProduct Information Report Industrial Hose: Multipurpose Air and Water Hose
Overview and Water Hose is primarily used to either provide air to power tools such as grinders, sanders and jackhammers, or to provide water to washdown equipment such as cement mixers, and to provide
More informationBEVERAGE CATALOG Hose For Every Service Since 1932
BEVERAGE CATALOG Hose For Every Service Since 1932 Recommended for Breweries Extremeflex Beverage Red with EZ Clean Cover Construction: Tube: White Chlorobutyl (FDA/USDA compliant and conforms to 3-A Sanitary
More information33.0 MPa (4800 PSI) 3/8 (9.5 mm) ISO SC R16
CM2T iso 11237 2sc r16 CM2T06 MegaFlex 33.0 MPa (4800 PSI) 3/8 (9.5 mm) ISO 11237 2SC R16-4 6 1/4 0.55 14.1 5800 40.0 23200 160.0 50 31 cm2t04-5 8 5/16 0.61 15.5 5000 35.0 20000 140.0 55 35 cm2t05-6 10
More informationGroup 10. PVC - PU Hoses
Group PVC - Hoses INDEX AND SYMBOL KEY Symbol Key for Hose Tables Available hose lengths from the factory Hose minimum bend radius Hose maximum vacuum limit Hose temperature range Hose min. burst pressure
More informationMATERIAL HANDLING ABRASIVES. MULTIPURPOSE General Purpose Heavy Duty Push-on CHEMICAL TRANSFER. CLEANING EqUIPMENT. Transfer Washdown MARINE
Air & ABRASIVES Bulk food Static Dissipating/ Temperature Static Thermo- Page Grade Clear Static Conductive Tube Range Wire plastic Rubber Artrac 106 Yes -40 F to 158 F Yes Arvac SW 105-40 F to 158 F Yes
More informationFounded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
More informationHEBEI QIANLI RUBBER PRODUCTS CO., LTD. AIR HOSE. Air hose for air tools or compressor equipment. Technical Data
AIR HOSE Air hose for air tools or compressor equipment Technical Data Company Profile is a technical company, which focus on researching, developing, manufacturing and exporting rubber hose and related
More informationGS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings which includes BSP, NPT, JIC, Metric, SAE 3000/6000 Flanges and
More information1 of 6. Prosdata Engineering Sdn. Bhd. Marine and Offshore Applications PRODUCT OVERVIEW
Prosdata Engineering Sdn. Bhd. Marine and Offshore Applications First class pipe sealing requires first-rate solutions. We provide simple, adaptable and secure solutions that are available worldwide. PRODUCT
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationCouplings, hose clamps and pneumatics
Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)...
More informationBrands: NovaFlex Hose Brands: NovaFlex Hose, Slurry-King Brands: NovaFlex Hose, NovaFlex Marine Hose Brands: Uni-Chem Composite
Industrial Rubber & Plastic Hose Product Guide 2012 The Products Plastic Extruded Hose and Duct NovaFlex manufactures a complete line of extruded thermo-plastic duct and hose products manufactured for
More informationEQUIPMENT & ACCESSORIES
0011 O-RING BOSS REPLACEMENT RINGS 00026 BSP O-RINGS FOR RECESSED PORT ADAPTERS Part Number O-Ring ID Wall Dia 0011-02 0.239" 0064" 0011-03 0.301" 0064" 0011-04 0.351" 0072" 0011-05 0.414" 0072" 0011-06
More informationHoses for the Agricultural Industry. Hoses & Connection Systems for demanding applications in the Agricultural Industry
Hoses for the Agricultural Industry Hoses & Connection Systems for demanding applications in the Agricultural Industry Your specialist partner for any application in the Agricultural Industry As much variety
More informationAUTOMOTIVE HOSE G611 FUEL LINE. Part Working Weight PRICE PER FOOT Standard Length I.D. Number O.D. Pressure per ft Cut Coil Reel Coil Reel
AUTO & TRUCK HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures
More informationHydraulic Hose. Braided - Multi-spiral - Powerwash - Thermoplastic - PTFE Ranges from 3/16 to 2
Hydraulic Hose Braided - Multi-spiral - Powerwash - Thermoplastic - PTFE Ranges from 3/16 to 2 HYDRAULIC HOSE 1SN Reinforcement: Onehigh tensile steel wire braid Cover: Abrasion, ozone & weather resistant
More informationUNREINFORCED TUBING 10
10 TUBING G400 COPPER TUBING The copper tubing shown here is soft copper (annealed temper) tube that is easily bent and formed, and suitable for easy use with compression and flare type fittings. It is
More informationSmall bending radius of only 4-5 times the internal diameter. Burst Pressure. Working Pressure. (kgf/cm2) (at 20 C) (kgf/cm2) (at 20 C) ALL 0002
240 HOSES Yellow Air Hose Light in weight and very durable. Small bending radius of only 4-5 times the internal diameter. ALL 0001 The 2-ply polyestter yarn braided construction delivers high working and
More information-06 2, , , , , , , , ,780 SAE 100R16 Type S -08 4, , ,390
Series 2SC-XD -04 6,530 2SC-XD / 2 SNK -06 5,585 Type 1SN -04 3,045 DIN EN 853 1SN -06 2,610-08 2,320-12 1,525-16 1,275 Braided 1-Wire 1SN is an Upgrade from SAE 100R1T Braided 2-Wire Extreme Flex - 1
More informationINTRODUCTION OF KOMAN
H Y D R A U L I C INTRODUCTION OF KOMAN KOMAN HYDRAULIC 02 03 시대는변해도, 기업환경은달라도 NO.1 비즈니스파트너, Koman 입니다 코만은 1981년회사설립이래, 오랫동안축척된기술과신뢰를바탕으로, 정밀한품질관리체제에서유압용호스및호스피팅과어댑터를 SAE, DIN, JIC 및 JIS 등의국제규격을통해생산하고있으며,
More informationSynflex Hose and Fittings. Master Catalog
Synflex Hose and Fittings Master Catalog Table of Contents Hose Selection Chart (by application/product)...3 Hydraulic Pressure Hose Selection Chart...5 Low and Medium Pressure Hose...7-10 3R30 Low Pressure...7
More informationCONTI ALLCRETE WIRE High quality hoses for high pressure concrete lines
CONTI ALLCRETE WIRE High quality hoses for high pressure concrete lines CONTI ALLCRETE WIRE is the perfect hose for the use in concrete and soild pumps. With its extruded smooth bore tube, made of highly
More informationHEBEI QIANLI RUBBER PRODUCTS CO., LTD. QIANLI. Catalog
HEBEI RUBBER PRODUCTS CO., LTD. Catalog QIAN LI Company Introduction HEBEI RUBBER PRODUCTS CO., LTD. is a technical company specializing in producing rubber hoses and related rubber products, sited in
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationH /J /K Series Standard Duty PVC Suction Hose
H /J /K Series Duty PVC Suction Hose Agricultural liquid fertilizer Air seeder lines Drain lines Irrigation lines Mining applications (MSHA) Rock dusting Water suction standard duty Construction: PVC tube
More informationINDUSTRIAL HOSES. Compressed Air L-185 AA COMPRESSED AIR 20 BAR (300 PSI) - STANDARD DUTY EXCEEDS DIN 20018/1
Copressed Air L-185 AA COMPRESSED AIR 20 BAR (300 PSI) - STANDARD DUTY EXCEEDS DIN 20018/1 BLACK SYNTHETIC ELASTOMER - OIL MIST RESISTANT REINFORCEMENT HIGH TENSILE TEXTILE CORDS BLACK SYNTHETIC ELASTOMER
More informationAssembly and Supply of:
CATALOGUE Inflex Hydraulic Engines & Machinery Spare Parts Trdg llc P.O.Box 392755, Dubai - UAE, Tel: 04 3394677, Fax: 04 3394388 Email: info@inflexhydraulics.com, www.inflexhydraulics.com www.stainlesssteelhosesdubai.com
More informationPneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
More informationBEVERAGE CATALOG Hose For Every Service Since 1932
BEVERAGE CATALOG Hose For Every Service Since 1932 Beverage Transfer Hose Extremeflex Beverage Red with EZ Clean Cover Construction: Tube: White Chlorobutyl (FDA/USDA compliant and conforms to 3-A Sanitary
More informationPTFE HOSE. Range 1.01 PTFE HOSE SMOOTH BORE PTFE HOSE Size : 1/8 to 1 1/8 Profile : Smoothbore Working Pressure : 5800 to kpa
01 1.01 Range SMOOTH BORE : 1/ to 1 1/ Profile : Smoothbore Working : 500 to 2300 kpa HIGH PRESSURE SMOOTH BORE PTFE : 1/4 to 1 1/2 Profile : Smoothbore Working : 27600 to 34500 kpa TAPE WRAPPED CONVOLUTED
More information> Vacuum Tubing 4040A...Standard, EPDM D...Reinforced EPDM T...High temperature, silicone...92
Coolant Fuel Oil AIR > Defroster, Air Duct, Pre-Cleaner 7768...Low cost, thin propylene-ethylene with PP helix...83 4663A...Thicker, neoprene with wire helix...84 4663J...Heavy duty, neoprene with wire
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationDelivering powerful solutions.
Eaton Industrial Hose Master Catalog North America Delivering powerful solutions. Eaton Industrial Hose Products Table of Contents Section Pages Introduction A-2 A-12 Air and Multipurpose High B-5 B-8
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationFlexibility and strength
polyurethane and Flexibility and strength : Polyester Polyurethane or Polyamide PA12 Supply of air to pneumatic components Flexible and long lasting Excellent memory: returns to original shape Pressure
More informationINDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES
INDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES HOFFMAN & LAMSON ENGINEERED VACUUM SYSTEMS Industrial Vacuum HOSES, TOOLS & ACCESSORIES Commercial Duty Hoses Crushproof Plastic 4 Flexible Plastic 4
More informationFlexible Hose Ducting Accessories
Flexible Hose Ducting Accessories Dependable. Anywhere. QUALITY HOSES FOR OVER 70 YEARS Flexaust has manufactured durable, long lasting, flexible hose and ducting solutions for industrial and commercial
More informationHEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE
HEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE About the company Customer oriented supplier HEBEI QIANLI RUBBER PRODUCTS CO., LTD. is a technical company, which focus on researching,
More informationMARINE HOSE. Part Working Bend Weight PRICE PER FOOT Standard I.D. Number O.D. Pressure Radius per ft Cut Standard Length
Hose 9 A note about marine fuel hoses Specifications for fuel hoses used aboard small craft have been standardized by the Technical Committee of the SAE (Society of Automotive Engineers) under their specification
More informationPL Potable LL 4. PL Fuel LL 6. Genova global LL 7. PL Abrasive LL 8. PL Grout 9. PL Mud 10. PL Splitfire 11. PL Fuel float 12. PL Fuel LL float 13
offshore hoses Content PL Potable LL 4 Acapulco 5 PL Fuel LL 6 huisstijlhandboek Genova global LL 7 PL Abrasive LL 8 PL Grout 9 PL Mud 10 PL Splitfire 11 PL Fuel float 12 PL Fuel LL float 13 PL Fuel LL
More informationDOUBLE BOLT CLAMPS G38 DOUBLE BOLT CLAMPS ( 3 4" - 2") G38W SPIRAL DOUBLE-BOLT CLAMP G38 DOUBLE BOLT CLAMPS (2 1 2" - 17")
DOUBLE BOLT CLAMPS These double-bolt clamps are made from plated ductile iron. In the smaller sizes (3 4" to 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation
More informationWATER WATER DISCHARGE. MULTIPURPOSE General Purpose Heavy Duty Push-on CHEMICAL TRANSFER. CLEANING EqUIPMENT. Transfer Washdown MARINE
DISCHARGE Air & Temp Coupled Lay-flat Page Rubber Thermoplastic MSHA Range Lengths Construction Brigade Mine 137 Yes Yes -10 F to 150 F Yes Fire Engine Booster 223 Yes 0 F to 180 F Yes Pathfinder Garden
More informationWATER CLEANING & BLASTING. ver_0001_05
WATER CLEANING & 1-1 www.manuli-hydraulics.com WATER INTRODUCTION The water cleaning hose range offered by Manuli can be applied to both hobby and professional water cleaning machines with both hot and
More informationCOB ADVANTAGES Quality, lightweight, durable nylon. 20% lighter than metal. Tough/shatter-proof and easily cleaned and maintained,
LOW PRESSURE NYLON EXPANSION PLUGS 0.5 to 6 CAST ALUMINUM EXPANSION PLUGS 1 1/2 TO 36 These superior, versatile, expandable plugs are used to accommodate a wide variety of industrial applications where
More informationABOUT US ABOUT US OUR VISION OUR MISSION CORE VALUES
ABOUT US Our company is led by a professional team, and is equipped with 15 Mobile Service Vans to attend break downs and turnkey jobs on site around the clock all over in UAE. If the volume of work is
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationSERIES COOLING TOWER. High Performance Counterflow Type SINGLE-CELL UP TO 1500HRT COOLING CAPACITY ENERGY CONSERVATION SPACE SAVING DESIGN FLEXIBILITY
TC-ES SERIES COOLING TOWER SINGLE-CELL UP TO 1500HRT COOLING CAPACITY High Performance Counterflow Type ENERGY CONSERVATION SPACE SAVING DESIGN FLEXIBILITY TC Series - ES Class is an induced draft, counterflow,
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More informationHydraulic Hoses, Fittings and Equipment
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic s, Fittings and Equipment s and Fittings The perfect range
More informationEaton Aeroquip Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton Aeroquip Core Hydraulic Hose Products Brochure Success made simple. The new standard for hydraulic hose and fittings. Sometimes less is more. Fewer products, smarter choices. Eaton is taking a new
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationSelf Cleaning Suction Screen
Effective 1/1/09 WATERMASTER Self Cleaning Suction Screen All galvanized construction with a heavy duty steel body with #3 expanded metal steel lid covered by #8 mesh, 20 gauge stainless cloth screen.
More informationEagle Brand Master Catalog. INDUSTRIAL & SPECIALTY HOSE PRODUCTS
Eagle Brand Master Catalog INDUSTRIAL & SPECIALTY HOSE PRODUCTS www.jgbhose.com TABLE OF CONTENTS PETROLEUM HOSE... 4 Eagle O.S.& D. Hose... 4 Eagle Tank Truck 150 PSI Hose... 4 Eagle OILVAC 150 PSI Hose...
More informationfunnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
More informationEngineered installation products Solutions for control panel applications
Engineered installation products Solutions for control panel applications 2 Engineered installation products Solutions for control panel applications Solutions for control panel applications ABB introduces
More informationWhile modern hydraulic hoses may have varying pressure ratings, temperature ranges and stock materials, all have similar construction features.
Introduction While modern hydraulic hoses may have varying pressure ratings, temperature ranges and stock materials, all have similar construction features. A hose consists of three basic components: The
More informationDISTRIBUTOR CATALOG. High-Performance Hoses, Ducts and Connectors. Motion & Flow Control Products, Inc
DISTRIBUTOR CATALOG High-Performance Hoses, Ducts and Connectors DISTRIBUTOR BENEFITS AND APPLICATIONS OF SILICONE RUBBER Why would you design or produce a part made of silicone rubber when so many other
More informationCall Toll Free: Toll-Free Fax:
PAGE Compression Couplings For Tubing and Pipe... 1-3 With Gasket Protectors... 4 Side-Band Couplings... 5 Replacement Gaskets... 6 Quickon Couplers... 7 Morris Gripper Couplers... 8 Repair Clamps All
More informationHOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
More informationGENFITT PROMOTION EURO PRICES GENERATIONS OF KNOWLEDGE AT YOUR SERVICE
EURO PRICES GENERATIONS OF KNOWLEDGE AT YOUR SERVICE JANUARY - FEBRUARY PROMOTION 2017 2 PUMP WHEEL SACK TROLLEY Powder coated and tubular steel construction Pneumatic tyres - 300 x 40 mm Curved back with
More informationINDUSTRIAL HOSES - composite
Characteristics Composite s are very light and very flexible, they feature unique, multi-layer construction. The unique design includes several fabric and film layers made of various materials and as strips
More informationAUTOMOTIVE HOSE G611 FUEL LINE. Tube: Smooth, black, oil and gasoline resistant nitrile rubber.
& Truck HOSE 8 AUTOMOTIVE HOSE Gasoline & diesel hose for fuel tanks & filler necks can be found in Marine Section Fuel Line hose is specially compounded to withstand the high under-the-hood temperatures
More informationPneumatic Tubing. A. Polyethylene Fractional Metric. B. Nylon Fractional Metric Mini-Coils
A. Polyethylene Fractional Metric B. Nylon Fractional Metric Mini-Coils C. Polyurethane Fractional Metric EZ Strip Bonded Polyurethane Mini Coils D. Ny-Chem Kynar * PVDF Fractional Metric Mini-Coils E.
More informationUSA: 866.LAWSON4U ( ) Canada: lawsonproducts.com. Fluid Power Solutions E715 V5 (8/17)
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fluid Power Solutions E715 V5 (8/17) LAWSON PRODUCTS' FLUID POWER SOLUTIONS Hydraulic Hose Systems Cut Your Hose Costs 50% by Making
More informationL15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More information