EXHAUST / DEF. > Differential Pressure Sensor Tubing 4040T...Silicone tubing, unreinforced...92

Transcription

1 EXHAUST / EXHAUST / > Diesel emissions fluid () for SCR systems Heated line for injection / return IS...Bulk length transfer and tank filler / vent PC...Formed tank filler / vent (not co-axial vent)...79 Also see: 4327FT...Nylon tubing for unheated injection / return, or tank vent Colored nylon tubing for unheated injection / return, or tank vent G (Renegade)...Bulk length transfer, chemical hose with wire helix. See Industrial catalog. Coolant hose section...scr system heater / coolant hoses > Marine Wet Exhaust 3137ME...Standard, tested per SAE J2006 R ME...Helical wire for flexibility, tested per SAE J2006 R CN...Formed hose (certain sizes) tested per SAE J > Differential Pressure Sensor Tubing 4040T...Silicone tubing, unreinforced...92 > Egr 4177 (with oil resistant liner)...silicone with FKM liner. Custom shapes available Coolant hose section...egr system heater / coolant hoses > Crank Case Vent 4319 (MegaTech LOC)...Straight SS...Formed...76 Powering Progress. 77

2 EXHAUST / Coolant Fuel 4217IS STANDARD DIESEL EMISSION FLU HOSE Standards Couplings Transfer of urea solutions such as AdBlue used in exhaust treatment of diesel engines equipped with selective catalytic reduction (SCR) technology. -40 C to +100 C (-40 F to +212 F) continuous. None. Zinc-free peroxide cured EPDM tube, synthetic fiber reinforcement, EPDM cover, wrapped appearance. Bulk lengths shipped in a box. May not be continuous lengths. Custom lengths available with minimum order quantity. bead fitting fastened with hose clamps or 75 GLX couplings. See Hydraulic Catalog for couplings and the ecrimp tool on.com for crimper data. Oil OD Burst Minimum Minimum Bend Rad. Min. Weight Ref. Bulk Length mm in. mm in. MPa psi MPa psi kpa in. Hg mm in. kg/m lbs/ft meters feet Bulk Length 6.4 1/ / / / Also see 4327FT nylon tubing (page 60) or 4697G Renegade hose in the Industrial catalog DIESEL EMISSION FLU HEATED LINE Air Brake fluid tank to dosing pump, to injector, and return to tank. Electric connections per customer specification, 12V or 24V. Also suitable for diesel fuel or oil heated line when using Viton O-rings. -40 C to +125 C (-40 F to +257 F). Standards Resistance to per ISO 22241, connectors per SAE J2044, coupling integrity per J2045. Couplings Nylon or rubber tube, carbon fiber heating sleeve, EPDM closed-cell foam or nylon convolute, thermoplastic over-molded quick-connect ends (straight or 90 angle). Minimum length = 300mm (12 ) for 12V system, or 600mm (24 ) for 24V system. All parts made and packaged to order. Minimum order quantity applies. SAE J2044 quick connect. OD Typical Power Range at 24V Bend Rad. Min. Weight Nominal mm in. mm in. MPa psi Watts/meter mm in. kg/m lbs/ft Nylon tube Rubber tube Corporation

3 EXHAUST / 4256PC TANK FILL AND VENT Fill or vent lines for fluid reservoir. Also used for engine coolant. Not for conveying fuel or oil. -40 C to +150 C (-40 F to +302 F). Standards Similar to SAE 20R3 EC Class D3. p-epdm tube, aramid knit reinforcement, EPDM cover. Various size boxes. Setup charge and minimum order quantity may apply. Available with end caps, individually bagged, or bulk bagged in the box. Couplings bead fitting fastened with hose clamps. (pages ) OD Nominal Burst Minimum Minimum Expanded End * Weight Nominal mm in. mm in. MPa psi kpa in. Hg mm in. kg/m lbs/ft SAE 20R3 EC HT Class D3 9.5 ±0.8 3/8 ± ± ± ** ** / ** ** Wall Nominal Burst Minimum Minimum Expanded End * Weight Nominal mm in. mm inch MPa psi kpa in. Hg mm in. kg/m lbs/ft SAE 20R4 EC HT Class D ± ± ** ** / ** ** ± ± ** ** * For cuff length on one end only. This guideline is subject to change based on hose design. ** No specification requirement. Powering Progress. 79

4 EXHAUST / Coolant Fuel 3137ME MARINE WET EXHAUST HOSE Standards SAE J2006 R1. Wet exhaust, engine coolant, and water circulation or discharge hose. Also suitable for air. Not for conveying fuel or oil. -40 C to +125 C (-40 F to +257 F) continuous for coolant, and 100 C (212 F) maximum for conveying air. EPDM tube, synthetic fabric reinforcement plies, EPDM cover with blue spiral and wrapped appearance. Bulk lengths are 12.5 foot sticks polyfilm wrapped. Custom lengths available with minimum order quantity. Couplings bead fitting fastened with hose clamps. (pages ) Oil Air OD Reference Burst Minimum Minimum Bend Rad. Min. Weight Ref. mm in. mm in. MPa psi MPa psi kpa in. Hg mm in. kg/m lbs/ft 12.5 ft. Length 28.6 ± /8 ± ± ± ** ** * * / ** ** * * / ** ** * * / ** ** * * / ** ** * * / ** ** * * / ** ** * * ** ** * * / ** ** * * / ** ** * * / ** ** * * / ** ** * * / ** ** * * / ** ** * * / ** ** * * ** ** * * / ** ** * * ** ** * * / ** ** * * ** ** * * ** ** * * * No specification requirement. ** If minimum bend radius is required, use 8 times the O.D. as a guide. Brake 80 Corporation

5 EXHAUST / 4686ME WIRE REINFORCED MARINE WET EXHAUST HOSE Standards SAE J2006 R2. Wet exhaust, engine coolant, and water circulation or discharge hose where tight bends or vacuum is required. Also suitable for air. Not for conveying fuel or oil. -40 C to +125 C (-40 F to +257 F) continuous for coolant, and 100 C (212 F) maximum for conveying air. EPDM tube, synthetic fabric reinforcement plies and two helical steel wires, EPDM cover with wrapped appearance. Bulk lengths are 12.5 foot sticks polyfilm wrapped. Custom lengths available with minimum order quantity. Couplings bead fitting fastened with hose clamps. (pages ) OD Reference Burst Minimum Minimum Bend Rad. Min. Weight Ref. mm in. mm in. MPa psi MPa psi kpa in. Hg mm in. kg/m lbs/ft 12.5 ft. Length 200 ft. Length 28.6 ± /8 ± ± ± / / / / / / / / / / / / / *** / *** / / *** Not stocked. Minimum order quantity applies. Powering Progress. 81