CONTENTS TORQUE-ARM II Shaft Mount Speed Reducers

Transcription

1 CONTENTS Features/Benefits G1-3 Specifications G1-7 Nomenclature G1-8 Easy Selection G1-9 Selection pplication and Class Numbers G1-12 Class I Selections G1-15 Class II Selections G1-21 Class III Selection G1-26 Selection/Dimensions T0107L Taper Bushed s and ccessories G1-32 Screw Conveyor Drive s and ccessories G1-34 Mount Dimensions G1-36 T1107H Taper Bushed s and ccessories G1-40 Screw Conveyor Drive s and ccessories G1-42 Mount Dimensions G1-44 T2115H Taper Bushed s and ccessories G1-48 Screw Conveyor Drive s and ccessories G1-50 Mount Dimensions G-52 T3203H Taper Bushed s and ccessories G1-56 Screw Conveyor Drive s and ccessories G1-58 Mount Dimensions G1-60 T4207H Taper Bushed s and ccessories G1-64 Screw Conveyor Drive s and ccessories G1-66 Mount Dimensions G1-68 T5215H Taper Bushed s and ccessories G1-72 Screw Conveyor Drive s and ccessories G1-74 Mount Dimensions G1-76 T6307H Taper Bushed s and ccessories G1-80 Screw Conveyor Drive s and ccessories G1-82 Mount Dimensions G1-84 TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-1

2 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 CONTENTS T7315H Taper Bushed s and ccessories G1-88 Screw Conveyor Drive s and ccessories G1-90 Mount Dimensions G1-92 T8407H Taper Bushed s and ccessories G1-96 Mount Dimensions G1-98 T9415H Taper Bushed s and ccessories G1-102 Mount Dimensions G1-104 T10507H Taper Bushed s and ccessories G1-106 Mount Dimensions G1-108 T12608H Taper Bushed s and ccessories G1-110 Mount Dimensions G1-112 Belt Guard Dimensions - T0107L - T12608H G1-114 Cooling Fan Dimensions - T4207H - T12608H G1-118 uxiliary Cooling Package...G1-118 Related Products XT Harsh Duty ccessories G1-119 Maximum Bore Straight Bore T II s G1-121 Nominal Sheave Ratios G1-122 Nominal Sheave Speeds G1-126 Renewal Parts G1-125 Engineering/Technical NEM and T II Information, Backstop Lift-off Speed G1-127 Maximum Input Speeds G1-128 Thrust Capacity for Screw Conveyor Drives G1-129 Lubrication Information G1-130 Viscosity Classification Equivalents...G1-135 Bearing Life s Function of Service Factor G1-136 Part Number Index INDEX-1 Keyword Index INDEX-35 G1-2

3 FETURES/BENEFITS THE LEGCY CONTINUES With 60 years of proven dependability and more than 2 million units in service throughout the world, DODGE TORQUE-RM speed reducers are the standard of the industry. Now, that legacy continues with the newest generation in shaft mounted speed reducers - TORQUE-RM II - offering patented innovations, new features, plus increased torque and horsepower ratings. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-3

4 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 FETURES/BENEFITS THE LEGCY CONTINUES The DODGE TORQUE-RM II surpasses all other reducers on the market because of its industry proven design and patented features. This powerful line of shaft mounted speed reducers - in 12 case sizes through 700 horsepower (HP) - offers unparalleled torque ratings and is quickly becoming the new industry standard. Improved features include: an all-new backstop concept, a patented seal ing system, a steel motor mount system, a state-of-the-art, totally modular design with an expanded ratio range to 40:1, and a patented twin tapered bushing system. The increased ratings of the TORQUE-RM II line are com parable to the next larger sized TXT reducer and are the result of the extended gear centers, wider gear faces, and optimized tooth geometry. The backstop design features centrifugal lift-off sprags for extended life and can be used with lubricants contain ing EP additives. In addition, the TORQUE-RM II line has a patented, premium sealing system that uses an HNBR oil seal protected by a metal excluder seal with rubbing lip. This harsh duty sealing system makes this reducer series a perfect fit for today s harsh duty industries such as aggregates, mining, cement, asphalt, mixing & milling and ethanol. The steel motor mount adjusts to multiple center dis tances and mounts in shaft mount and screw conveyor positions. Its patented twin tapered bushing system - in standard length, short shaft, and metric versions - offers all the features of our standard twin tapered TORQUE-RM bushing design which are unique to DODGE. The patented insertable tapered wedge enables the optional extended tapered bushing kit to be applied for shorter shaft lengths, allowing the replacement of straight bore or single bushed reducers. PRODUCT CPBILITIES Twelve reducer sizes with modular accessories ll reducers can be shaft mounted, screw conveyor, vertical and flange mounted HP through 700, and torque ratings through 500,000 lb. in Standard 5, 9, 15, 25 and up to 40:1 gear ratios Nearly 300:1 speed reduction with V belt drives Bushing bores 1 inch through 7 inches ll new highly efficient helical gearing design Meets or exceeds GM standards including 5,000 hour L-10 bearing life, 25,000 average life Smooth, rugged class 30 cast iron housings with pry slots 36 month - 18 month warranty protection Complete Metric T II product line available T II products in conformance to TEX directive 94/9/EC guidelines Premium HNBR oil sealing system and filter breather Shaft mounted reducer with twin tapered bushing and motor mount Screw conveyor drive with adapter, drive shaft and motor mount G1-4

5 FETURES/BENEFITS THE LEGCY CONTINUES The new-generation DODGE TORQUE-RM II has been engineered throughout with features designed to improve performance, extend service life, and reduce or simplify maintenance. Extended gear centers and increased gear tooth contact provide dramatically increased torque and horsepower ratings. Three large pry slots make rebuilding easy. Proven, GM-rated, case-carburized gear design ensures high efficiency. Has Class I starting load capability of 200%. Totally modular construction, one reducer for shaft mount, screw conveyor, vertical and flange mount applications. Magnetic drain plug and baffled air breather are standard. Premium HNBR oil seals are protected by a patented labyrinth metal shield and excluder lip auxiliary seal on all shafts. No lubrication required. Factory tested. 100% cast iron housing (Class 30) eliminates bearing cap leak paths and maximizes surface area for heat dissipation. Patented twin tapered bushings are avail able in standard, patented short shaft, and metric versions. Heavy duty tapered roller bearings provide 25,000 hours average life and 5,000 L-10 minimum hours life even in the heaviest load conditions. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-5

6 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 FETURES/BENEFITS THE LEGCY CONTINUES Shaft Mounted STNDRD TWIN TPERED BUSHING SYSTEM is an easy on, easy off, no-wobble bush ing system featuring a fully split, ductile iron 8 taper and reliable twin support. vailable in inch and metric bores. Increased bore capability in many sizes. Our SHORT-SHFT TWIN-TPERED BUSH ING KITS eliminate the need for full-length shafts. Constructed with ductile iron, it has all the features of our standard bushing system. vailable in both inch and metric bores. This MODULR MOTOR MOUNT is attached and supported by two angle iron brackets with equally spaced holes, which align with the spacing of the cast slots of the gear case. This way, the motor mount can be adjusted up or down depending on the customer s requirements. It can also be mounted on the side of the reducer for screw conveyor applications. This new-design BCKSTOP option helps prevent reverse rotation in high stop-start loads, and results in less wear and longer life. Its centrifugal throw-out design eliminates sprag sliding and reduces wear. It operates with standard and EP lubricants and requires no external lubrication. Ruggedly constructed, the T Rod Kit includes standard brackets, functions as a belttensioning device, and offers universal mounting options. Screw Conveyor The CEM BOLT-ON DPTER features double-lip seals on both surfaces. The adapter center is open for con taminate drop out for optimized sealing. n optional DJUSTBLE PCKING KIT bolts to the standard adapter and provides a proven sealing option for hostile environments. Packing can be retightened. The SCREW CONVEYOR DRIVE SHFTS are made from high alloy steel and engi neered to CEM dimensions. They are three-bolt drilled and their tapered fit ensures simple instal lation. The rugged locking plate (patent pending) also provides a mechani cal shaft removal feature. #316 Stainless Steel drive shafts also available. This complete BOLT-ON BELT GURD PCKGE requires no drilling or straps. It allows multiple height adjust ments, and has an open metal inspection feature. Other accessories include cooling fans and vertical breather kits. G1-6

7 SPECIFICTIONS TORQUE-RM II Speed s: The speed reducer shall be either a belt driven or direct coupled enclosed shaft mount type unit with a single or double reduction ratio. The reducer shall mount directly on the driven shaft and utilize an adjustable torque arm that attaches from the gear case to the support structure or foundation. Optional all steel motor mount adjusts to various belt center distances and supports the motor. The reducer housing shall be constructed of two piece corrosion resistant, class 30 gray iron. ll housings shall be doweled and precision machined to assure accurate alignment for all gear sets. Pry slots are provided for ease of repair. ll gearing shall be of helical design, case carburized and precision finished to insure a high surface durability with a resilient tooth core for impact resistance and optimum service life. Gears shall be supported between bearings to maintain proper alignment of gear meshes, maximize load carrying Screw Conveyor Drives: The drive shall consist of a standard speed reducer; a cast iron, bolt on, four bolt mounting adapter with double lip seals on both ends, and optional bolt on adjustable packing kit. standard three-hole drive shaft will be machined from a high quality alloy steel. General Specifications capabilities, and to eliminate overhung loads imposed on bearings. Design meets or exceed GM standards. bearings shall be of the tapered roller type, meet or exceed GM standards, and provide a 25,000 hour average life, a 5,000 L-10 GM Class I standard. ll seals shall be of the lip, spring loaded type, made of Hydrogenated Nitrile Butadiene Rubber. metal excluder seal with rubber Iip is external to the standard oil seal. installation shall be accomplished by using ductile iron, fully split, two bushing system. removal shall be accomplished by providing jack screw holes in the bushing flanges to mechanically remove the tapered assembly. Backstops should be lift-off sprag type designed for use with standard and extreme pressure (EP) lubricants. The drive shall conform to Conveyor Equipment Manufacturers ssociation (CEM) standards. Optional all steel motor mount adjusts to various belt center distances and supports the motor. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-7

8 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 NOMENCLTURE Basic TORQUE-RM II T1107H25 Shaft Mount Drive ccessories T1107R T1107 Rod ssembly T1107TB x 1-7/16 T1107TB x 1-7/16 Twin Tapered Bushing Kit for Standard Length Driven Shaft T1107TBS x 1/7-16 T1107TB x 1-7/16 Twin Tapered Bushing Kit for Short Driven Shaft T1107MM T1107MM Mount ssembly T - TORQUE-RM II Shaft Mount 1- Case Size GM Code reference & Traditional Bore Size H - Heavy Duty Rating & Extended Bore Size 25 - Nominal Ration Other ccessories T1107BS Backstop ssembly T4207CF Cooling Fan ssembly T1-4 FB KIT Filter Breather Kit Screw Conveyor Drive ccessories T1107SC T1107SC Screw Conveyor Standard dapter & Hardware Kit (Does not include shaft) T1107SCP Kit T11070SCP Screw djustable Packing Kit (Does not include shaft) T1107SCS x 1-7/16 T11070SCS Screw Conveyor Drive Shaft x 1-7/17 Diameter T1107BG T1107BG Belt Guard G1-8

9 ESY SELECTION Easy Selection Method (For Electric s) For TORQUE-RM II nd Screw Conveyor Drive pplications When to Use Easy Selection The Easy Selection tables for T II Shaft Mount reducers are for electric motor selections up to 400 horsepower with output speeds up to 400 RPM, using GM recommended application class numbers. For extreme shock or high energy loads which must be absorbed, as when stalling; for a power source other than an electric motor; or for extreme ambient temperatures or oversized equipment, consult DODGE pplication Engineering, How to Select Step 1: Determine Class of Service - See Table 1 to determine Load Classification for applications under normal conditions. Find the type application and duty cycle that most closely matches your specific application. Class 1 - Steady load not exceeding HP rating and light shock loads during 10 hours a day. Moderate shock loads are allowable if operation is intermittent For Class 1 applications, the maximum value of starting and momentary peak loads should not exceed 2 x HP rating. If it exceeds this amount it should be divided by 2 and the result used in the selection table instead of the HP rating. Class 2 - Steady load not exceeding HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. For Class 2 applications, the maximum value of starting and momentary peak loads should not exceed 2.8 x HP rating. If it exceeds this amount it should be divided by 2.8 and the result used in the selection table instead of the HP rating. Class 3 - Moderate shock loads for over 10 hours a day. Heavy shock loads are allowable during 10 hours a day. For Class 3 applications, the maximum value of starting and momentary peak loads should not exceed 4 x HP rating. If it exceeds this amount it should be divided by 4 and the result used in the selection table instead of the HP rating. Step 2: Determine Size - See the Easy Selection Tables, pages G1-12- G1-34. From Class I, II or III Table, find the reducer size for the application horsepower and output speed. Note: For applications where fan cooling is acceptable, use the Easy Selection tables with an increased Class of Service number. Where more than one reducer selection is listed, the most economical ratio is generally listed first. See Engineering/Technical pages for maximum input speed, output speed, and thrust capacity ratings for T II reducers. Step 3: Compare Hollow Shaft Bore with the size of the driven shaft. ll DODGE T II Taper Bushed reducers require bushings to mount reducer to driven shaft. Refer to reducer pages for available bushings. If the driven shaft is larger than the bore of the selected reducers, the shaft must be machined to the proper size, or select a larger reducer. Check driven shaft and key for strength. Step 4: Check Dimensions - See Selection/ Dimension pages for reducer dimensions, weights, part numbers and Torque-rm rod mounting positions. See Engineering/ Technical pages for reducer mounting positions. Step 5: Select a Belt Drive rrangement - From the Sheave ratio information, pages G1-125 thru G1-126, select a sheave ratio for the belt drive. The reducer sheave P.D., Pitch Diameter, should not be smaller than the mini mum sheave diameter shown in the selection tables. Note: Mount the sheave as close as possible to the reducer to minimize the effect of overhung load on the reducer. See DODGE Drives Components catalog to select sheaves, bushings and belts for the appropriate belt drive. Step- 6: Select ccessories - See Selection/Dimensions pages for description, dimensions, weights and part numbers for accessories for the T II reducer selected: Rod ssembly Bushing Kit Mount Cooling Fan Backstop ssembly Belt Guard Screw Conveyor dapter Filter Breather Drive Shaft djustable Packing Kit Vertical Breather Kit TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-9

10 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 ESY SELECTION Easy Selection Method (For Electric s) For TORQUE-RM II nd Screw Conveyor Drive pplications NOTE: IMPORTNT INFORMTION T II reducers are stocked without a Torque-rm Rod ssembly. Order a T Rod ssembly as a separate item. T II reducers are shipped without oil. They must be lubricated at time of installation. T II reducers are suitable, from stock, for vertical or incline mounting and flange mounting; no reducer modification is required. See accessories for vertical breather kit. T II Backstop - For best life, select reducer gear ratios which exceed input shaft speeds required for backstop sprag lift-off. See page G1-129 for Backstop Lift-off speeds. WRNING: Backstops are not recommended for applica tions involving energy absorption and shock or torque loads in excess of reducer ratings or on applications such as chair lift, amusement rides, etc., where the safety of persons or property is dependent on their function. On such applications, other safety devices should be pro vided. Note: The T II reducer has built-in auxiliary sealing which gives extra seal protection for all environments, at no addi tional cost to the user. See the Feature/Benefits pages for details. Example: Easy Selection method for TORQUE-RM II s - Shaft Mount and Screw Conveyor Drive Shaft Mount pplication: 10 HP 1750 RPM motor is used to drive a belt conveyor moving sand at 70 RPM. The conveyor is uniformly loaded and operates 16 hours per day. The head pulley shaft diameter is 2-3/16. The user specifications call for a means of holding the conveyor from moving backwards. Step 1: Determine Class of Service - From Table 1 on page G1-12 locate the appropriate application, belt conveyors, uniformly loaded or fed for over 10 hours per day. This load is classified as a Class II application. Step 2: Determine Size - From Class II Selection, page G1-22, find the column for10 HP and read down to 70 RPM. reducer size T3203H25 or T3203H15 reducer is the correct selection. See Engineering/Technical pages to compare input and output speed and overhung load application requirements with reducer ratings. Step 3: Compare Hollow Shaft Bore of a size T3203H25 or T3203H15 with the head pulley shaft diameter. Per page G1-60, 2-3/16 is the maximum bore available for this size of reducer. It will work in this application. Be sure to check the driven shaft and key for strength. Step 4: Check Dimensions and Weights -See Selection/ Dimension pages for reducer dimensions, weights, part numbers and other pertinent drive dimensions, as well as information on TORQUE-RM rod mounting positions. See Engineering/Technical pages for information on reducer mounting positions. Step 5: Select a Belt Drive - From the Sheave Ratio information, pagesg1-125 thru G1-126, select a belt drive ratio for the conveyor speed of 70 RPM. Then select a belt drive, from the DODGE Drive components catalog, that meets the customer s needs (service factor, minimum number of belts) and preferences (belt style, bushing mounting style, etc.) The sheave diameters must not be smaller than the minimum diameters shown in the selection tables. Step 6: Select ccessories - See Selection/Dimensions pages to pick out accessories for this application: T3203BS Backstop ssembly, to hold the conveyor from moving backwards T3203MM Mount ssembly, for top mounting the motor to the reducer. T3203BG - Pos. B Belt Guard, to cover and protect the rotating belt drive. G1-10

11 ESY SELECTION Easy Selection Method (For Electric s) For TORQUE-RM II nd Screw Conveyor Drive pplications Example: Easy Selection method for TORQUE-RM II s - Shaft Mount and Screw Conveyor Drive Screw Conveyor Drive pplication: 5 HP 1750 RPM motor is used to drive a heavy duty screw conveyor moving at 72 RPM. The conveyor runs 10 hours per day in a local feed mill conveying grain. The user needs a reducer drive compatible with a CEM 12 diameter screw and a 2-7/16 diameter drive shaft. Step 1: Determine Class of Service - From Table 1 page G1-12, locate the appropriate application, conveyors, general purpose; screw conveyor - heavy duty, not uniformly loaded for 3 to 10 hours per day. This load is classified as a Class II application. Step 2: Determine Size - From Class II Selection Table, page G1-22, find the column for 5 HP and read down to 72 RPM. T1107H25 reducer is the correct selection. See Engineering/Technical pages to compare input and output speed and overhung load application requirements with reducer ratings. Step 3: Check Dimensions - See Selection/Dimensions pages for reducer dimensions, weights, part numbers and other pertinent drive dimensions. See Engineering/ Technical pages for information on reducer mounting positions. Step 4: Select Drive Shaft to fit screw diameter. See Selection/Dimension page G1-40. Here we verify that a 2-7/16 diameter drive shaft is compatible with a 12 diameter screw. Step 5: Select a Belt Drive - From the Sheave Ratio information, pages G1-125 thru G1-126, select a belt drive ratio for the screw conveyor speed of 72 RPM. Then select a belt drive, from the DODGE Drive Components catalog, that meets the customer s needs (service factor, minimum number of belts) and preferences (belt style, bushing mounting style, etc.) The sheave diameters must not be smaller than the minimum diameters shown in the selection tables. Step 6: Select ccessories - See Selection/Dimensions pages to pick out screw conveyor accessories for this application: T1107SC dapter & Hardware Kit, to mount reducer to trough end of screw conveyor. T1107SCP djustable Packing Kit, to add additional sealing protection to reducer drive. T1107MM Mount ssembly, for top mounting of motor to the reducer. T1107BG-Pos. C Belt Guard, to cover and protect the rotating belt drive. T1107SCS X 2-7/16 Drive Shaft, to connect the reducer to the screw conveyor. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-11

12 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Table 1: pplication Classification nd Class Numbers Class Numbers pplication 3 to 10 Hrs Over 10 Hrs per Day per Day GITTORS (Mixers) Pure Liquids I II Liquids and Solids II II Liquids-Variable Density II II BLOWERS Centrifugal I II Lobe II II Vane II II BREWING ND DISTILLING Bottling Machinery I II Brew Kettles-Continuous Duty II II Cookers-Continuous Duty II II Mash Tubs-Continuous Duty II II Scale Hopper-Frequent Starts II II CN FILLING MCHINES I II CR DUMPERS III III CR PULLERS II II CLRIFIERS I II CLSSIFIERS II II CLY WORKING MCHINERY III III Brick Press III III Briquette Machine II II Pug Mill COMPCTORS COMPRESSORS Centrifugal I II Lobe II II Reciprocating, Multi-Cylinder II III Reciprocating, Single-Cylinder III III CONVEYORS-GENERL PURPOSE Includes pron, ssembly, Belt, Bucket, Chain, Flight, Oven and Screw Uniformly Loaded or Fed I II Heavy Duty-Not Uniformly Fed II II Severe Duty-Reciprocating or Shaker III III CRNES CRUSHER Stone or Ore III III DREDGES Cable Reels II II Conveyors II II Cutter Head Drives III III Pumps III III Screen Drives III III Stackers II II Winches II II ELEVTORS Bucket II II Centrifugal Discharge I II Escalators I II Freight II II Gravity Discharge I II EXTRUDERS General II II Plastics Consult DODGE for more information on class number Class Numbers pplication 3 to 10 Hrs Over 10 Hrs per Day per Day EXTRUDERS (cont) Variable Speed Drive III III Fixed Speed Drive III III Rubber Continuous Screw Operation III III Intermittent Screw Operation III III FNS Centrifugal I II Forced Draft II II Induced Draft II II Industrial & Mine II II FEEDERS pron II II Belt II II Disc I II Reciprocating III III Screw II II FOOD INDUSTRY I II Cereal Cooker II II Dough Mixer II II Meat Grinders II II Slicers GENERTORS ND EXCITERS II II HMMER MILLS III III HOISTS LUNDRY TUMBLERS II II LUNDRY WSHERS II III LUMBER INDUSTRY Barkers Spindle Feed II II Main Drive III III Conveyors Burner II II Main or Heavy Duty II II Main Log III III Re-saw, Merry-Go-Round II II Slab III III Transfer II II Chains Floor II II Green II III Cut-Off Saws Chain II III Drag II III Debarking Drums III III Feeds Edger II II Gang III III Trimmer II II Log Deck III III Log Hauls-Incline-Well Type III III Log Tuning Devices III III Planer Feed II II Planer Tilting Hoists II II Rolls-Live-off brg.- Roll Cases III III Sorting Table II II Triple Hoist II II G1-12

13 SELECTION Table 1: pplication Classification nd Class Numbers Class Numbers pplication 3 to 10 Hrs Over 10 Hrs per Day per Day LUMBER INDUSTRY (cont) Transfers Chain II III Craneway II III Tray Drives II II Veneer Lathe Drives II II METL MILLS Draw bench Carriage and Main Drive II II Runout Table Non-Reversing Group Drives III II Individual Drives III III Reversing II III Slab Pushers III II Shears II III Wire Drawing II II Wire Winding Machine II II METL STRIP PROCESSING MCHINERY Bridles II II Coilers & Uncoliers I II Edge Trimmers II II Flatteners II II Loopers (ccumulators) I I Pinch Rolls II II Scrap Choppers II II Shears III III Slitters II II MILLS, ROTRY TYPE Ball & Rod Spur Ring Gear III III Helical Ring Gear II II Direct Connected III III Cement Kilns II II Dryers & Coolers II II MIXERS, CEMENT II II PPER MILLS gitator (Mixer) II II gitator for Pure Liquors II II Barking Drums III III Barkers-Mechanical III III Beater II II Breaker Stack II II Chipper III III Chip Feeder II II Coating Rolls II II Conveyors Chip, Bark, Chemical II Log (including Slab) III Couch Rolls II Cutter III Cylinder Molds II Embosser II Extruder II Fourdrinier Rolls (includes Lump breaker, dandy roll, wire II II turning, and return rolls) II II Class Numbers pplication 3 to 10 Hrs Over 10 Hrs per Day per Day PPER MILLS (cont) Jordan II II Kiln Drive II II Mt. Hope Roll II II Paper Rolls II II Platter II II Presses-Felt & Suction III III Pulper II II Pumps-Vacuum II II Reel (Surface Type) Screens Chip II II Rotary II II Vibrating III III Size Press II II Thickener (C ) II II (DC ) II II Washer (C ) II II (DC ) II II Wind and Unwind Stand l l Winders (Surface Type) II II PLSTICS INDUSTRY-SECONDRY PROCESSING II II Blow Molders II II Coating II II Film II II Pipe II II Pre-Plasticizers II II Rods II II Sheet II II Tubing PULLERS-BRGE HUL II II PUMPS Centrifugal I II Proportioning II II Reciprocating Single cting, 3 or more cylinders II II Double cting, 2 or more cylinders II II Rotary Gear Type I II Lobe I II Vane I II RUBBER ND PLSTICS INDUSTRY Intensive Internal Mixers III III Batch Mixers II II Continuous Mixers Mixing Mill 2 smooth rolls II II 1 or 2 corrugated rolls III III Batch Drop Mill - 2 smooth rolls II II Cracker Warmer - 2 roll, 1 corrugated roll III III Cracker-2 corrugated rolls III III Holding, Feed & Blend Mill-2 rolls II II Refiner-2 rolls II II Calenders II II SND MULLER II II TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-13

14 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Table 1: pplication Classification nd Class Numbers Class Numbers pplication 3 to 10 Hrs Over 10 Hrs per Day per Day SEWGE DISPOSL EQUIPMENT Bar Screens II II Chemical Feeders II II Dewatering Screens II II Scum Breakers II II Slow or Rapid Mixers II II Sludge Collectors II II Thickener II II Vacuum Filters II II SCREENS ir Washing I II Rotary-Stone or Gravel II II Traveling Water Intake I I SCREW CONVEYORS Uniformly Loaded or Fed I II Heavy Duty II II SUGR INDUSTRY Beet Slicer III III Cane knives II II Crushers II II Mills (low speed end) III III Class Numbers pplication 3 to 10 Hrs Over 10 Hrs per Day per Day TEXTILE INDUSTRY Batchers II II Calenders II II Cards II II Dry Cans II II Dyeing Machinery II II Looms II II Mangles II II Nappers II II Pads II II Stashers II II Soapers II II Spinners II II Tenter Frames II II Washers II II Winders II II G1-14

15 SELECTION Class I Selections (SF = 1.0) HP Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T0107L T0107L T0107L T0107L T0107L T0107L /4 T0107L T0107L T0107L T0107L T0107L T0107L T0107L T1107H T1107H T1107H T0107L T0107L T0107L / T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L /2 T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L See Page G1-132 for lubrication for 15 RPM and slower HP 3/ /2 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H HP 1-1/2 (cont) 2 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T2115H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-15

16 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Class I Selections (SF = 1.0) HP 3 5 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H See Page G1-132 for lubrication for 15 RPM and slower HP 5 (cont) 7-1/2 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T1107H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T1107H T0107L T0107L T0107L HP Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T2115H T2115H T1107H T2115H T2115H T1107H T1107H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T10507H T10507H T10507H T9415H T9415H T9415H G1-16

17 SELECTION Class I Selections (SF = 1.0) HP 15 (cont) 20 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T3203H T2115H T3203H T2115H T2115H T2115H T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H See Page G1-132 for lubrication for 15 RPM and slower See page G2-68 and G2-69 for information on TDT1425 and TDT1530 s HP 20 (cont) 25 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T4207H T4207H T3203H T4207H T4207H T3203H T3203H T3203H T3203H T2115H T3203H T3203H T2115H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H HP 25 (cont) 30 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T5215H T5215H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T3203H T3203H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T4207H T4207H TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-17

18 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Class I Selections (SF = 1.0) HP 30 (cont) 40 Output RPM Selection Min. Sheave Cooling Dia. Method P.D T4207H T4207H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T3203H TDT TDT T12608H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T5215H * See Page G1-132 for lubrication for 15 RPM and slower See page G2-68 and G2-69 for information on TDT1425 and TDT1530 s HP 40 (cont) 50 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T4207H T5215H T5215H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T4207H T4207H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H T9415H T9415H T9415H T9415H T8407H Fan T8407H T8407H T8407H T8407H T8407H T7315H T7315H T7315H T6307H Fan T6307H T6307H T6307H T6307H T5215H Fan T5215H T5215H T5215H T5215H T5215H T6307H HP 50 (cont) 60 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T5215H T5215H T5215H T5215H T5215H T4207H T5215H T5215H T4207H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H Fan 19 T9415H Fan T9415H T9415H Fan T9415H T9415H T8407H Fan T8407H Fan T8407H T8407H Fan T8407H T8407H T7315H Fan T7315H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T5215H Fan T6307H T5215H T6307H T6307H T5215H T5215H T5215H Fan T5215H T5215H T6307H G1-18

19 SELECTION Class I Selections (SF = 1.0) HP 60 (cont) 75 Output RPM Selection Min. Sheave Cooling Dia. Method P.D T5215H T5215H T5215H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H Fan T9415H T8407H Fan T8407H Fan T8407H Fan T8407H Fan T8407H Fan T8407H T7315H Fan 50 T7315H Fan T7315H T7315H Fan T7315H T6307H Fan T6307H Fan T6307H Fan T6307H Fan T6307H Fan T6307H Fan T7315H T6307H Fan T6307H Fan T6307H T6307H Fan T6307H T5215H T6307H T5215H Fan T6307H T6307H T5215H * See Page G1-132 for lubrication for 15 RPM and slower See page G2-68 and G2-69 for information on TDT1425 and TDT1530 s P&C (Pump & Coolers) - Use the DODGE Speed auxiliary cooling package, part number HP Output RPM Selection Min. Sheave Dia. P.D. Cooling Method 6-11 TDT TDT T12608H Fan T12608H T12608H T12608H T12608H T12608H T10507H Fan T10507H Fan T10507H T10507H Fan T10507H T10507H T9415H Fan T9415H Fan T9415H Fan T8407H Fan T8407H Fan T8407H Fan T8407H Fan T8407H Fan T7315H Fan T7315H Fan T7315H Fan T7315H Fan 111 T6307H Fan T6307H Fan T6307H Fan T6307H Fan T7315H T6307H Fan T7315H T6307H Fan T6307H T6307H TDT TDT T12608H Fan T12608H Fan T12608H Fan T12608H Fan T12608H Fan T12608H T10507H Fan 29 T12608H Fan T12608H T10507H Fan T10507H Fan T10507H Fan HP 125 (cont) Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T9415H P&C T9415H P&C T9415H Fan T9415H P&C T9415H Fan T8407H P&C T8407H Fan T8407H Fan T7315H Fan T7315H Fan T7315H Fan T7315H Fan T6307H Fan T6307H Fan T7315H T7315H T6307H T6307H Fan 9-17 TDT TDT T12608H P&C T12608H Fan T12608H Fan T10507H P&C T12608H Fan T12608H Fan T10507H P&C T10507H Fan T10507H T9415H P&C 50 T9415H P&C T9415H Fan T9415H P&C T9415H Fan T8407H P&C T8407H Fan T8407H Fan 113 T7315H Fan T7315H Fan T7315H Fan T7315H Fan T7315H TDT TDT T12608H P&C T12608H P&C T12608H Fan T10507H P&C T12608H P&C T12608H Fan TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-19

20 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Class I Selections (SF = 1.0) HP 200 (cont) Output RPM Selection Min. Sheave Cooling Dia. Method P.D. 51 T12608H P&C T12608H Fan T10507H P&C T10507H Fan 68 T9415H P&C T10507H Fan T9415H P&C T9415H P&C T9415H P&C T8407H P&C T7315H P&C T7315H Fan TDT TDT Fan T12608H P&C T12608H P&C T12608H P&C T12608H P&C T12608H P&C T10507H P&C T10507H P&C T10507H P&C T10507H P&C T10507H P&C T9415H P&C TDT TDT P&C T12608H P&C T12608H P&C T12608H P&C T10507H P&C T9415H P&C TDT Fan TDT P&C T12608H P&C T12608H P&C T12608H P&C T10507H P&C TDT Fan TDT P&C T12608H P&C T12608H P&C T12608H P&C TDT P&C TDT Fan TDT P&C T12608H P&C TDT P&C TDT P&C T12608H P&C HP Output RPM Selection Min. Sheave Cooling Dia. Method P.D TDT P&C TDT P&C * See Page G1-132 for lubrication for 15 RPM and slower See page G2-68 and G2-69 for information on TDT1425 and TDT1530 s P&C (Pump & Coolers) - Use the DODGE Speed auxiliary cooling package, part number G1-20

21 SELECTION Class Ii Selections (SF = 1.4) HP Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T1107H T1107H T1107H T0107L T0107L T0107L / T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T1107H T1107H T1107H T0107L T0107L T0107L / T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L /2 T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T3203H /4 4-5 T3203H T3203H * See Page G1-132 for lubrication for 15 RPM and slower HP 3/4 (cont) 1 1-1/2 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H HP 1-1/2 (cont) 2 3 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-21

22 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Class II Selections (SF = 1.4) HP 3 (cont) 5 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T1107H T0107L T0107L T0107L * See Page G1-132 for lubrication for 15 RPM and slower HP 7-1/2 10 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T2115H T2115H T1107H T2115H T2115H T1107H T1107H T2115H T1107H T2115H T1107H T1107H T1107H T0107L T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H HP 10 (cont) 15 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T3203H T2115H T3203H T2115H T2115H T1107H T2115H T2115H T1107H T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T3203H T4207H T3203H T3203H G1-22

23 SELECTION Class II Selections (SF = 1.4) HP 15 (cont) 20 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T3203H T3203H T5215H T3203H T3203H T4207H T3203H T3203H T3203H T3203H T3203H T2115H T3203H T3203H T2115H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T5215H T4207H T3203H T5215H T3203H T5215H T3203H T4207H * See Page G1-132 for lubrication for 15 RPM and slower See Pages G2-68 and G2-69 for information on TDT1425 and TDT1530 s HP 20 (cont) Output RPM Selection Min. Sheave Cooling Dia. Method P.D T3203H T3203H T3203H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T5215H T4207H T5215H T4207H T5215H T5215H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T3203H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H HP 30 (cont) 40 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T5215H T4207H T5215H T5215H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T3203H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T7315H T7315H T6307H T6307H T5215H T5215H T5215H T6307H T5215H T5215H T5215H T5215H T6307H TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-23

24 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Class II Selections (SF = 1.4) HP Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T5215H T5215H T5215H T5215H T5215H (cont) T4207H T5215H T5215H T4207H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T8407H Fan T8407H T8407H T7315H T7315H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T6307H T7315H T6307H T6307H T6307H T6307H T5215H T6307H T5215H T5215H T6307H T5215H T6307H T5215H T5215H T5215H * See Page G1-132 for lubrication for 15 RPM and slower See page G2-68 and G2-69 for information on TDT1425 and TDT1530 s HP Output RPM Selection Min. Sheave Cooling Dia. Method P.D. 5-9 TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H T9415H T8407H Fan T8407H T8407H T8407H T8407H T7315H T7315H T7315H T7315H T6307H T6307H T7315H T6307H T7315H T6307H T6307H T6307H Fan T6307H T5215H T6307H T6307H T5215H TDT TDT T12608H T12608H T12608H T10507H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H Fan T9415H T8407H Fan 49 T8407H Fan T9415H T8407H Fan 50 T8407H Fan T8407H T8407H Fan T8407H T7315H Fan T7315H HP 75 (cont) Output RPM Selection Min. Sheave Cooling Dia. Method P.D T7315H T7315H T7315H T7315H T6307H Fan T6307H Fan T6307H Fan T7315H T6307H Fan T6307H T6307H TDT TDT T12608H T12608H T12608H T10507H Fan 33 T12608H T12608H T10507H Fan T10507H T10507H T9415H Fan T9415H Fan T9415H Fan T9415H Fan T9415H Fan T8407H Fan T8407H Fan T8407H Fan 103 T7315H Fan T7315H Fan T7315H Fan T7315H Fan T6307H Fan T6307H Fan T7315H T7315H T6307H TDT TDT T12608H Fan T12608H T12608H T10507H Fan T12608H T12608H T10507H Fan T10507H Fan T10507H Fan T10507H Fan T10507H Fan T9415H Fan T9415H Fan T9415H Fan T8407H Fan T7315H Fan T7315H G1-24

25 SELECTION Class II Selections (SF = 1.4) HP Output RPM Selection Min. Sheave Cooling Dia. Method P.D TDT TDT T12608H P&C T12608H Fan T12608H Fan T12608H Fan T12608H Fan T10507H Fan T10507H Fan 72 T9415H P&C T10507H Fan T9415H P&C T9415H Fan T9415H Fan T8407H Fan T7315H Fan T7315H TDT TDT Fan T12608H P&C 50 T12608H P&C T12608H Fan T12608H P&C T12608H Fan T10507H P&C T10507H Fan T10507H Fan T9415H P&C HP 250 Output RPM Selection Min. Sheave Cooling Dia. Method P.D TDT TDT P&C T12608H P&C T12608H P&C T12608H P&C T10507H P&C TDT TDT P&C 300 T12608H P&C T12608H P&C T12608H P&C TDT TDT P&C T12608H P&C TDT Fan T12608H P&C TDT Fan TDT Fan * See Page G1-132 for lubrication for 15 RPM and slower See Pages G2-68 and G2-69 for information on TDT1425 and TDT1530 s P&C (Pump & Coolers) - Use the DODGE Speed uxiliary cooling package, part number TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-25

26 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Class III Selections (SF = 2.0) HP Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L /4 T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L /3 T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T3203H T3203H T3203H T2115H T2115H T2115H T1107H / T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L * See Page G1-132 for lubrication for 15 RPM and slower HP 1/2 (cont) 3/4 1 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T0107L T0107L T0107L T0107L T0107L T0107L T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T2115H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L HP 1 (cont) 1-1/2 2 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T0107L T0107L T0107L T0107L T0107L T0107L T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T0107L T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T0107L T0107L T0107L T0107L G1-26

27 SELECTION Class III Selections (SF = 2.0) HP 2 (cont) 3 5 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T0107L T0107L T0107L T0107L T0107L T0107L T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T2115H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T1107H T0107L T0107L T1107H T0107L T0107L T0107L T0107L T0107L T0107L T9415H T9415H T9415H T8407H T8407H T8407H * See Page G1-132 for lubrication for 15 RPM and slower See Pages G2-68 and G2-69 for information on TDT1425 and TDT1530 HP 5 (cont) 7-1/2 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T2115H T2115H T2115H T2115H T2115H T1107H T2115H T2115H T1107H T1107H T2115H T1107H T1107H T1107H T1107H T1107H T1107H T0107L T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H HP 7-1/2 (cont) 10 Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T4207H T4207H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T3203H T3203H T2115H T2115H T3203H T2115H T3203H T2115H T2115H T1107H T2115H T2115H T1107H T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T3203H T3203H T3203H T3203H T3203H T3203H T4207H TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-27

28 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Class III Selections (SF = 2.0) HP Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T3203H T3203H T3203H T3203H T3203H (cont) T2115H T3203H T3203H T2115H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T4207H T4207H T4207H T4207H T4207H T4207H T5215H T4207H T5215H T3203H T5215H T3203H T4207H T4207H T3203H TDT TDT T12608H TDT * See Page G1-132 for lubrication for 15 RPM and slower See Pages G2-68 and G2-69 for information on TDT1425 and TDT1530 HP 20 (cont) 25 Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T5215H T4207H T5215H T5215H T4207H T4207H T5215H T4207H T5215H T4207H T4207H T4207H T3203H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H HP 25 (cont) 30 Output RPM 50 Selection Min. Sheave Dia. P.D. Cooling Method T6307H T6307H T6307H T6307H T6307H T5215H T5215H T5215H T5215H T5215H T5215H T6307H T5215H T5215H T5215H T5215H T5215H T4207H T5215H T5215H T4207H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T7315H T7315H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T5215H T6307H T5215H T6307H T6307H T5215H T5215H T6307H T5215H T6307H T5215H T5215H G1-28

29 SELECTION Class III Selections (SF = 2.0) HP 30 (cont) Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T4207H T5215H T5215H T4207H TDT TDT T12608H TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T8407H T8407H T8407H T8407H T8407H T7315H T7315H T7315H T7315H T6307H T6307H T6307H T6307H T7315H T6307H T6307H T6307H T6307H T6307H T5215H T6307H T6307H T5215H TDT TDT T12608H T12608H T12608H T10507H T10507H T10507H T9415H T9415H T9415H T9415H Fan T9415H T9415H * See Page G1-132 for lubrication for 15 RPM and slower See Pages G2-68 and G2-69 for information on TDT1425 and TDT1530 HP Output RPM Selection Min. Sheave Cooling Dia. Method P.D. T8407H Fan T8407H T8407H T8407H T8407H T7315H T7315H (cont) T7315H T7315H T6307H T6307H T6307H T6307H T7315H T6307H T7315H T6307H T6307H T6307H TDT TDT T12608H TDT T12608H T12608H T12608H T10507H T12608H T12608H T10507H T10507H T10507H T9415H Fan T9415H T9415H T9415H Fan T9415H T9415H T9415H T9415H T8407H T8407H T8407H Fan T8407H T8407H T7315H T7315H T7315H T7315H T6307H T6307H T7315H T6307H Fan T7315H T7315H T6307H HP Output RPM Selection Min. Sheave Cooling Dia. Method P.D TDT TDT T12608H T12608H T12608H T10507H T12608H T12608H T10507H T10507H T10507H T9415H Fan 50 T9415H Fan T9415H T9415H Fan T9415H T8407H Fan T8407H T8407H T7315H T7315H T7315H T7315H T7315H Fan T7315H T6307H TDT TDT T12608H T12608H T12608H T10507H Fan T12608H T12608H T12608H T12608H T10507H T10507H T10507H Fan T10507H T9415H Fan T10507H T9415H Fan T9415H Fan T9415H Fan T8407H Fan T7315H Fan T7315H TDT TDT T12608H Fan T12608H T12608H T12608H T12608H T12608H Fan T12608H TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-29

30 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION Class III Selections (SF = 2.0) HP 125 (cont) Output RPM Selection Min. Sheave Dia. P.D. Cooling Method T10507H Fan T10507H Fan T10507H Fan T9415H Fan TDT TDT TDT Fan T12608H Fan T12608H Fan T12608H Fan T10507H Fan T9415H Fan TDT TDT P&C T12608H P&C T12608H Fan T12608H Fan T12608H P&C TDT TDT P&C T12608H P&C TDT TDT * See Page G1-132 for lubrication for 15 RPM and slower See page G2-68 and G2-69 for information on TDT1425 and TDT1530 s P&C (Pump & Coolers) - Use the DODGE Speed auxiliary cooling package, part number G1-30

31 SELECTION SELECTION GUIDE: T II TORQUE-RM SHFT MOUNT REDUCERS ND SCREW CONVEYOR DRIVES This is a reference sheet for quick selection and specification on DODGE T II Shaft Mount s. Use it to identify information needed to make an accurate selection with a step-by-step selection format for choosing a reducer, accessories and belt drive. Name Company Name Phone Number Fax No. ddress: pplication Data: Driven Equipment Type RPM Shaft Size Hours of service/day Class of Service Type of Load: Uniform Moderate Shock Screw Conveyor pplications: Screw Diameter Drive shaft diameter HP RPM Frame Size Shaft Size Type of reducer mounting: Horizontal Vertical - Input up Vertical - Input down Incline (degree of) Flange Mounting Unusual ambient temperature: Other important application characteristics (reversing duty, start/stop cycles Drive Selection: Step 1 - Determine class of service Step 2 - From Class of Service Table, select reducer type, size and ratio that meets pplication HP and Driven RPM requirements Twin Taper Bushed Screw Conveyor Step 3 - Select reducer accessories required for application: Twin Taper Bushing Kit: Standard Shaft Short Shaft Rod ssembly Backstop Cooling Fan Mount Belt Guard dapter & Hardware Kit djustable Packing Kit Drive Shaft Stainless Drive Shaft Other Belt Drive Specification: Service Factor Belt Type Center Distance Sheave Ratio Driver: Shaft Diameter Sheave Bushing Belt Size & Qty Driven: Shaft Diameter Sheave Bushing Belt Size & Qty TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-31

32 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - Ta0107l, Single nd Double Reductions G1-32

33 SELECTION/DIMENSIONS Taper Bushed s - T0107L, Single nd Double Reductions T0107L Taper Bushed s (1) T0107L ccessories Size Part Number GM maximum bore size GM Code ctual Ratio (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Weight lbs. Description Part Number T0107L S T0107R Rod ssembly (1) T0107L D T1107/0107L BS Backstop ssembly T0107L D T0107MM Mount ssembly (56-215T) (3) T0107L D T0107BG Belt Guard - Pos. B (56-215T) T0107L D T0107BG Belt Guard - Pos. C (56-215T) (4) (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. Weight lbs. T0107BG Belt Guard - Pos. D (56-215T) T0-T3 Vertical Breather Kit T0107L V-Ring Kit Filter Breather Plug T0107L = Light duty, best value T0107L Lube Kit LUBEKITT Rod assembly mounting locations are limited to positions shown in drawing. (5) (6) T0107L Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Weight Standard Shaft Number Required Short Shaft lbs. (7) (9) (10) Bushing Kit Bushing Kit (8) See page G1-128 for input shaft speed necessary for backstop sprag lift-off. (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions. (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications. Part Number Weight lbs. Shaft Keyseat (9) (10) Required T0107TB x 1-7/ /8 x 3/16 x T0107TB x 1-3/ /16 x 5/32 x T0107TB x 1-5/ /16 x 5/32 x T0107TB x 1-1/ /4 x 1/8 x T0107TB x 1-3/ /4 x 1/8 x 6.83 T0107TBS x 1-3/ /4 x 1/8 x 4.35 T0107TB x 1-1/ /4 x 1/8 x 6.83 T0107TBS x 1-1/ /4 x 1/8 x 4.35 T0107TB x /4 x 1/8 x 6.83 T0107TBS x /4 x 1/8 x 4.35 TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-33

34 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Screw Conveyor Drive - T0107L, Single nd Double Reductions G1-34

35 SELECTION/DIMENSIONS Screw Conveyor Drive - T0107L, Single nd Double Reductions T0107L Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 6, 9 1-1/ / /2-13 9, / /8 12, / / /8 12, 14, 16, 18, / /4 (1) (4) (5) T0107L ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T0107SC dapter & Hardware Kit T0107SCP djustable Packing Kit (3) T0107SCS x 1-1/2 Drive Shaft T0107SCS x 2 Drive Shaft T0107SCS x 2-7/16 Drive Shaft T0107SCS x 3 Drive Shaft T0107SCS x 1-1/2 Stainless Steel Drive Shaft T0107SCS x 2 Stainless Steel Drive Shaft T0107SCS x 2-7/16 Stainless Steel Drive Shaft T0107SCS x 3 Stainless Steel Drive Shaft (1) See page G1-35 for Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive includes a T II, SC dapter & Hardware Kit and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-35

36 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T0107L, Position B & D G1-36

37 SELECTION/DIMENSIONS Mount Dimensions - T0107L, Position B & D (1) Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 182T & 184T 213T & 215T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-37

38 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T0107L, Position & C G1-38

39 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T0107L, Position & C Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Frame Lateral djustment Mount 182T & 184T 213T & 215T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Note: Minimum centers contain 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 *** M4 M4 M3 M2 M2 M *** *** M4 M4 M3 M3 M2 M *** *** M4 M4 M3 M3 M3 M *** *** *** *** M4 M3 M3 M3 (1) For U Or Flared Trough Ends Per CEM TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-39

40 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Tapered Bushed s - T1107H, Single nd Double Reduction G1-40

41 SELECTION/DIMENSIONS Tapered Bushed s - T1107H, Single nd Double Reduction T1107H Taper Bushed s (1) T1107H ccessories Size Part Number GM Code ctual Ratio Weight lbs. (5) (6) T1107H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Weight Standard Shaft Number Required Short Shaft Description Part Number Weight lbs. Part Number T1107H S T1107R Rod ssembly (1) T1107H D T1107H/0107L BS Backstop ssembly T1107H D T1107MM Mount ssembly (56-254T) (3) T1107H D T1107BG Belt Guard - Pos. B (56-254T) T1107H D T1107BG Belt Guard - Pos. C (56-254T) (4) (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. T1107H - Heavy duty, extended value See page G1-122 for Maximum Bore Straight Bore T II s + Rod ssembly mounting locations are limited to positions show in drawing. Shaft Keyseat (9) (10) Required Bushing Kit (7) lbs. (9) (10) Bushing Kit (8) T1107TB x 1-1/ /8 x 3/16 x T1107TB x 1-7/ /8 x 3/16 x 6.95 T1107TBS x 1-7/ /8 x 3/16 x 4.43 T1107TB x 1-3/ /16 x 5/32 x 6.95 T1107TBS x 1-3/ /16 x 5/32 x 4.43 T1107TB x 1-5/ /16 x 5/32 x 6.95 T1107TBS x 1-5/ /16 x 5/32 x 4.43 T1107TB x 1-1/ /4 x 1/8 x 6.95 T1107TBS x 1-1/ /4 x 1/8 x 4.43 T1107TB x 1-3/ /4 x 1/8 x 6.95 T1107TBS x 1-3/ /4 x 1/8 x 4.43 T1107TB x 1-1/ /4 x 1/8 x 6.95 T1107TBS x 1-1/ /4 x 1/8 x 4.43 T1107TB x 1-1/ /4 x 1/8 x 6.95 T1107TBS x 1-1/ /4 x 1/8 x 4.43 T1107TB x /4 x 1/8 x 6.95 T1107TBS x /4 x 1/8 x 4.43 GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key. (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Weight lbs. T1107BG Belt Guard - Pos D (56-254T) T0-T3 - Vertical Breather Kit T1107H - V-Ring Kit Filter Breather Plug T1107H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-41

42 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Screw Conveyor Drive - Ta1107h, Single nd Double Reduction G1-42

43 SELECTION/DIMENSIONS Screw Conveyor Drive - T1107H, Single nd Double Reduction T1107H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 6, 9 1-1/ / /2-13 9, / /8 12, / / /8 12, 14, 16, 18, / /4 (1) (4) (5) T1107H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T1107SC dapter & Hardware Kit T1107SCP djustable Packing Kit (3) T1107SCS x 1-1/2 Drive Shaft T1107SCS x 2 Drive Shaft T1107SCS x 2-7/16 Drive Shaft T1107SCS x 3 Drive Shaft T1107SCS x 1-1/2 Stainless Steel Drive Shaft T1107SCS x 2 Stainless Steel Drive Shaft T1107SCS x 2-7/16 Stainless Steel Drive Shaft T1107SCS x 3 Stainless Steel Drive Shaft (1) See page G1-43 for Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive includes a T II, SC dapter & Hardware Kit and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-43

44 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T1107H, Position B & D G1-44

45 SELECTION/DIMENSIONS Mount Dimensions - T1107H, Position B & D (1) Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Mounting Position B Position D Frame Mount 182T & 184T 213T & 215T 254T Height Min Max Min Max Min Max M M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-45

46 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T1107H, Position & C G1-46

47 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T1107H, Position & C Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Mounting Position Position C Frame Mount 182T & 184T 213T & 215T 254T Height Min Max Min Max Min Max M M M M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 *** M4 M4 M3 M2 M2 M *** *** M4 M4 M3 M3 M2 M *** *** M4 M4 M3 M3 M3 M *** *** *** *** M4 M3 M3 M3 (1) For U Or Flared Trough Ends Per CEM TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-47

48 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed - T2115H, Single nd Double Reduction G1-48

49 SELECTION/DIMENSIONS Taper Bushed - T2115H, Single nd Double Reduction T2115H Taper Bushed s (1) Size (5) (6) T2115H Tapered Bushing Kits Bushing Size Standard Shaft Part Number GM Code Part Number (7) Weight lbs. ctual Ratio Weight lbs. Shaft Keyseat Required (9) (10) T2115H ccessories Bushing Size Short Shaft Bushing Kit (8) Description Part Number Weight lbs. Part Number T2115H S T2115R Rod ssembly (1) T2115H D T2115BS Backstop ssembly T2115H D T2115MM Mount ssembly (56-256T) (3) T2115H D T2115BG Belt Guard - Pos. B (56-256T) T2115H D T2115BG Belt Guard - Pos. C (56-256T) (4) (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. + Rod ssembly mounting locations are limited to positions shown in drawing Shaft Keyseat Required (9) (10) Bushing Kit T2115TB x 2-3/ /2 x 1/4 x T2115TB x /2 x 1/4 x T2115TB x 1-15/ /2 x 1/4 x 7.80 T2115TBS x 1-15/ /2 x 1/4 x 4.80 T2115TB x 1-7/ /2 x 1/4 x 7.80 T2115TBS x 1-7/ /2 x 1/4 x 4.80 T2115TB x 1-3/ /8 x 3/16 x 7.80 T2115TBS x 1-3/ /8 x 3/16 x 4.80 T2115TB x 1-11/ /8 x 3/16 x 7.80 T2115TBS x 1-11/ /8 x 3/16 x 4.80 T2115TB x 1-5/ /8 x 3/16 x 7.80 T2115TBS x 1-5/ /8 x 3/16 x 4.80 T2115TB x 1-1/ /8 x 3/16 x 7.80 T2115TBS x 1-1/ /8 x 3/16 x 4.80 T2115TB x 1-7/ /8 x 3/16 x 7.80 T2115TBS x 1-7/ /8 x 3/16 x 4.80 T2115TB x 1-3/ /16 x 5/32 x 7.80 T2115TBS x 1-3/ /16 x 5/32 x 4.80 T2115TB x 1-5/ /16 x 5/32 x 7.80 T2115TBS x 1-5/ /16 x 5/32 x 4.80 GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Weight lbs. T2115BG Belt Guard - Pos. D (56-256T) T0-T3 Vertical Breather Kit T2115H V-Ring Kit Filter Breather Plug T2115H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-49

50 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Screw Conveyor Drive - T2115H, Single nd Double Reduction G1-50

51 SELECTION/DIMENSIONS Screw Conveyor Drive - T2115H, Single nd Double Reduction T2115H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 6, 9 1-1/ / /2-13 9, / /8 12, / / /8 12, 14, 16, 18, / /4 (1) (4) (5) T2115H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T2115SC dapter & Hardware Kit T2115SCP djustable Packing Kit (3) T2115SCS x 1-1/2 Drive Shaft T2115SCS x 2 Drive Shaft T2115SCS x 2-7/16 Drive Shaft T2115SCS x 3 Drive Shaft T2115SCS x 1-1/2 Stainless Steel Drive Shaft T2115SCS x 2 Stainless Steel Drive Shaft T2115SCS x 2-7/16 Stainless Steel Drive Shaft T2115SCS x 3 Stainless Steel Drive Shaft (1) See page G1-51 for Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive includes a T II, SC dapter & Hardware Kit and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-51

52 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T2115H, Position B & D G1-52

53 SELECTION/DIMENSIONS Mount Dimensions - T2115H, Position B & D (1) Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Mounting Position B Position D Frame Mount 182T & 184T 213T & 215T 254T & 256T Height Min Max Min Max Min Max M M M M Note: Minimum centers contain 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-53

54 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T2115H, Position & C G1-54

55 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T2115H, Position & C Frame Lateral djustment Mount T & 145T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Mounting Position Position C Frame Mount 182T & 184T 213T & 215T 254T & 256T Height Min Max Min Max Min Max M M M M M M Note: Minimum centers contain 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 *** M4 M4 M3 M2 M2 M *** *** M4 M4 M3 M3 M2 M *** *** M4 M4 M3 M3 M3 M *** *** *** *** M4 M3 M3 M3 (1) For U Or Flared Trough Ends Per CEM TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-55

56 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed - T3203H, Single nd Double Reduction G1-56

57 SELECTION/DIMENSIONS Taper Bushed - T3203H, Single nd Double Reduction T3203H Taper Bushed s (1) T3203H ccessories Size Part Number GM Code ctual Ratio Weight lbs. Description Part Number T3203H S T3203R Rod ssembly (1) T3203H D T3203BS Backstop ssembly T3203H D T3203MM Mount ssembly ( T) (3) T3203H D T3203BG Belt Guard - Pos. B ( T) T3203H D T3203BG Belt Guard - Pos. C ( T) (4) (1) s are supplied from stock ready for vertical mounting and for flange T3203BG Belt Guard - Pos. D ( T) mounting. Rod assembly is not included with reducer. Order as a separate part T0-T3 Vertical Breather Kit number. T3203H V-Ring Kit See page G1-122 for Maximum Bore Straight Bore T II s Filter Breather Plug Rod ssembly mounting locations are limited T3203H Lube Kit LUBEKITT to positions shown in drawing. See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications (5) (6) T3203H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Shaft Keyseat Weight Part Weight Standard Shaft Number Required Short Driven Shaft Required (7) lbs. (9) (10) Number lbs. (9) (10) Bushing Kit Bushing Kit (8) T3203TB x 2-3/ /8 x 5/16 x T3203TB x 2-1/ /2 x 1/4 x T3203TB x 2-3/ /2 x 1/4 x 8.55 T3203TBS x 2-3/ /2 x 1/4 x 5.46 T3203TB x 2-1/ /2 x 1/4 x 8.55 T3203TBS x 2-1/ /2 x 1/4 x 5.46 T3203TB x /2 x 1/4 x 8.55 T3203TBS x /2 x 1/4 x 5.46 T3203TB x 1-15/ /2 x 1/4 x 8.55 T3203TBS x 1-15/ /2 x 1/4 x 5.46 T3203TB x 1-7/ /2 x 1/4 x 8.55 T3203TBS x 1-7/ /2 x 1/4 x 5.46 T3203TB x 1-3/ /8 x 3/16 x 8.55 T3203TBS x 1-3/ /8 x 3/16 x 5.46 T3203TB x 1-11/ /8 x 3/16 x 8.55 T3203TBS x 1-11/ /8 x 3/16 x 5.46 T3203TB x 1-5/ /8 x 3/16 x 8.55 T3023TBS x 1-5/ /8 x 3/16 x 5.46 T3203TB x 1-1/ /8 x 3/16 x 8.55 T3203TBS x 1-1/ /8 x 3/16 x 5.46 T3203TB x 1-7/ /8 x 3/16 x 8.55 T3203TBS x 1-7/ /8 x 3/16 x 5.46 GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Weight Lbs TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-57

58 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Screw Conveyor Drive - T3203H, Single nd Double Reduction G BOLT Dia. H G C F D B D Dia. E G1-58

59 SELECTION/DIMENSIONS Screw Conveyor Drive - T3203H, Single nd Double Reduction T3203H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 6, 9 1-1/ / /2-13 9, / /8 12, / / /8 12, 14, 16, 18, / /4 18, 20, / / /4 (1) (4) (5) T3203H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T3203SC dapter & Hardware Kit T3203SCP djustable Packing Kit (3) T3203SCS x 1-1/2 Drive Shaft T3203SCS x 2 Drive Shaft T3203SCS x 2-7/16 Drive Shaft T3203SCS x 3 Drive Shaft T3203SCS x 3-7/16 Drive Shaft T3203SCS x 1-1/2 Stainless Steel Drive Shaft T3203SCS x 2 Stainless Steel Drive Shaft T3203SCS x 2-7/16 Stainless Steel Drive Shaft T3203SCS x 3 Stainless Steel Drive Shaft T3203SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G1-59 for Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive includes a T II, SC dapter & Hardware Kit and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-59

60 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T3203H, Position B & D MIN CENTERS MIN CENTERS MX CENTERS 0.53 POSITION B MX CENTERS POSITION D M2 M3 M2 M C B INPUT SHFT G1-60

61 SELECTION/DIMENSIONS Mount Dimensions - T3203H, Position B & D (1) Frame Lateral djustment Mount 143T & 145T 182T & 184T Mounting Height B Min B Max C Min C Max Min Max Min Max Position B M M Position D M M Mounting Position B Position D Frame Mount 213T & 215T 254T & 256T 284T & 286T Height Min Max Min Max Min Max M M M M Note: Minimum centers contain 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-61

62 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T3203H, Position & C G1-62

63 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T3203H, Position & C Frame Lateral djustment Mount 143T & 145T 182T & 184T Mounting Height B Min B Max C Min C Max Min Max Min Max Position M M M Position C M M M Mounting Position Position C Frame Mount 213T & 215T 254T & 256T 284T & 286T Height Min Max Min Max Min Max M M M M M M Note: Minimum centers contain 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 *** M4 M4 M3 M2 M2 M *** *** M4 M4 M3 M3 M2 M *** *** M4 M4 M3 M3 M3 M *** *** *** *** M4 M3 M3 M3 (1) For U Or Flared Trough Ends Per CEM TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-63

64 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - T4207H, Single nd Double Reduction 1/2 BOLT MIN MX Dia REDUCER WITH BCKSTOP o /16 DI SHFT 3/8x3/8x4-11/16 KEY 5.50 *1.48 MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 1/2-13 NC x 1.00 DEEP FLNGE MOUNTING DIMENSIONS * 2-11/16" Max END OF BERING ON DRIVEN SHFT G1-64

65 SELECTION/DIMENSIONS Taper Bushed s - T4207H, Single nd Double Reduction T4207H Taper Bushed s (1) T4207H ccessories Size Part Number GM Code T4207H Tapered Bushing Kits Bushing Size Part Standard Shaft Number Bushing Kit (5) (6) Weight lbs. ctual Ratio Weight lbs. Shaft Keyseat Required Bushing Size Short Shaft Bushing Kit (8) Description Part Number Weight lbs. Part Number T4207H S T4207R Rod ssembly (1) T4207H D T4207BS Backstop ssembly T4207H D T4207BS 40:1 Backstop ssembly T4207H D T4207MM Mount ssembly ( T) (3) T4207H D T4207BG Belt Guard - Pos. B ( T) (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. Shaft Keyseat Required (7) (9) (10) (9) (10) T4207TB x 2-11/ /8 x 5/16 x T4207TB x 2-1/ /8 x 5/16 x T4207TB x 2-7/ /8 x 5/16 x 8.93 T4207TBS x 2-7/ /8 x 5/16 x 5.65 T4207TB x 2-3/ /8 x 5/16 x 8.93 T4207TBS x 2-3/ /8 x 5/16 x 5.65 T4207TB x 2-1/ /2 x 1/4 x 8.93 T4207TBS x 2-1/ /2 x 1/4 x 5.65 T4207TB x 2-3/ /2 x 1/4 x 8.93 T4207TBS x 2-3/ /2 x 1/4 x 5.65 T4207TB x 2-1/ /2 x 1/4 x 8.93 T4207TBS x 2-1/ /2 x 1/4 x 5.65 T4207TB x /2 x 1/4 x 8.93 T4207TBS x /2 x 1/4 x 5.65 T4207TB x 1-15/ /2 x 1/4 x 8.93 T4207TBS x 1-15/ /2 x 1/4 x 5.65 T4207TB x 1-7/ /2 x 1/4 x 8.93 T4207TBS x 1-7/ /2 x 1/4 x 5.65 T4207TB x 1-3/ /8 x 3/16 x 8.93 T4207TBS x 1-3/ /8 x 3/16 x 5.65 T4207TB x 1-11/ /8 x 3/16 x 8.93 T4207TBS x 1-11/ /8 x 3/16 x 5.65 GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Weight lbs. T4207BG Belt Guard - Pos. C ( T) (4) T4207BG Belt Guard - Pos. D ( T) T4207CF Cooling Fan ssembly See page G1-122 for Maximum Bore Straight Bore T II s T4-T12 Vertical Breather Kit T4207H V-Ring Kit Rod ssembly mounting locations are limited to positions shown in drawing Filter Breather ssy T4207H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications See page G1-120 for cooling fan dimensions TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-65

66 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Screw Conveyor Drive - T4207H, Single nd Double Reduction BOLT Dia. H G G C F D B D Dia. E G1-66

67 SELECTION/DIMENSIONS Screw Conveyor Drive - T4207H, Single nd Double Reduction T4207H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 9, / /8 12, / / /8 12, 14, 16, 18, / /4 18, 20, / / /4 (1) (4) (5) T4207H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T4207SC dapter & Hardware Kit T4207SCP djustable Packing Kit (3) T4207SCS x 2 Drive Shaft T4207SCS x 2-7/16 Drive Shaft T4207SCS x 3 Drive Shaft T4207SCS x 3-7/16 Drive Shaft T4207SCS x 2 Stainless Steel Drive Shaft T4207SCS x 2-7/16 Stainless Steel Drive Shaft T4207SCS x 3 Stainless Steel Drive Shaft T4207SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G1-67 for Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive includes a T II, SC dapter & Hardware Kit and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-67

68 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T4207H, Position B & D MIN CENTERS MIN CENTERS POSITION B MX CENTERS MX CENTERS POSITION D M2 M3 M2 M C B INPUT SHFT G1-68

69 SELECTION/DIMENSIONS Mount Dimensions - T4207H, Position B & D (1) Frame Lateral djustment Mount 143T & 145T 182T & 184T 213T & 215T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 254T & 256T 284T & 286T 324T & 326T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-69

70 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T4207H, Position & C MIN CENTERS MX CENTERS MIN CENTERS 1.77 POSITION MX CENTERS POSITION C M2 M3 M4 M2 M3 M C B INPUT SHFT G1-70

71 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T4207H, Position & C Frame Lateral djustment Mount 143T & 145T 182T & 184T 213T & 215T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Frame Lateral djustment Mount 254T & 256T 284T & 286T 324T & 326T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 *** M4 M4 M3 M2 M2 M *** *** M4 M4 M3 M3 M2 M *** *** M4 M4 M3 M3 M3 M *** *** *** *** M4 M3 M3 M3 (1) For U Or Flared Trough Ends Per CEM TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-71

72 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - T5215H, Single nd Double Reduction 1/2 BOLT MIN MX REDUCER WITH BCKSTOP 90 o /8" DI SHFT 3/8x3/8x5-3/4 KEY * 1.81" MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 5/8-11 NC x 1.25 DEEP FLNGE MOUNTING DIMENSIONS * 3-3/16" MX END OF BERING ON DRIVEN SHFT G1-72

73 SELECTION/DIMENSIONS Taper Bushed s - T5215H, Single nd Double Reduction T5215H Taper Bushed s (1) T5215H ccessories Size Part Number GM Code ctual Ratio Weight lbs. (5) (6) T5215H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Weight Required Part Weight Shaft Keyseat Standard Shaft Number Short Shaft lbs. Number lbs. Required (9) (10 ) Bushing Kit (7) (9) (10) Bushing Kit (8) T5215TB x 3-3/ /4 x 3/8 x T5215TB x /4 x 3/8 x T5215TB x 2-15/ /4 x 3/8 x T5215TBS x 2-15/ /4 x 3/8 x 6.36 T5215TB x 2-7/ /4 x 3/8 x T5215TBS x 2-7/ /4 x 3/8 x 6.36 T5215TB x 2-11/ /8 x 5/16 x T5215TBS x 2-11/ /8 x 5/16 x 6.36 T5215TB x 2-1/ /8 x 5/16 x T5215TBS x 2-1/ /8 x 5/16 x 6.36 T5215TB x 2-7/ /8 x 5/16 x T5215TBS x 2-7/ /8 x 5/16 x 6.36 T5215TB x 2-3/ /8 x 5/16 x T5215TBS x 2-3/ /8 x 5/16 x 6.36 T5215TB x 2-1/ /2 x 1/4 x T5215TBS x 2-1/ /2 x 1/4 x 6.36 T5215TB x 2-3/ /2 x 1/4 x T5215TBS x 2-3/ /2 x 1/4 x 6.36 T5215TB x 2-1/ /2 x 1/4 x T5215TBS x 2-1/ /2 x 1/4 x 6.36 T5215TB x /2 x 1/4 x T5215TBS x /2 x 1/4 x 6.36 T5215TB x 1-15/ /2 x 1/4 x T5215TBS x 1-15/ /2 x 1/4 x 6.36 Description Part Number T5215H S T5215R Rod ssembly (1) T5215H D T5215BS Backstop ssembly T5215H D T521BS 40:1 Backstop ssembly T5215H D T5215MM Mount ssembly ( T) (3 ) T5215H D T5215BG Belt Guard - Pos. B ( T) (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Weight lbs. T5215BG Belt Guard - Pos. C ( T) (4) T5215BG Belt Guard - Pos. D ( T) T5215CF Cooling Fan ssembly T4-T12 Vertical Breather Kit See page G1-122 for Maximum Bore Straight T5215H V-Ring Kit Bore T II s Filter Breather Kit Rod ssembly mounting locations are limited to positions shown in drawing. T5215H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off. (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions. (4) Use Position C belt guard for T II reducer in screw conveyor drive applications. See page G1-120 for cooling fan dimensions TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-73

74 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Screw Conveyor Drive - T5215H, Single nd Double Reduction G G BOLT Dia. H C F D D B Dia. E G1-74

75 SELECTION/DIMENSIONS Screw Conveyor Drive - T5215H, Single nd Double Reduction T5215H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 9, / /8 12, / / /8 12, 14, 16, 18, / /4 18, 20, / / /4 (1) (4) (5) T5215H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T5215SC dapter & Hardware Kit T5215SCP djustable Packing Kit (3) T5215SCS x 2 Drive Shaft T5215SCS x 2-7/16 Drive Shaft T5215SCS x 3 Drive Shaft T5215SCS x 3-7/16Drive Shaft T5215SCS x 2 Stainless Steel Drive Shaft T5215SCS x 2-7/16 Stainless Steel Drive Shaft T5215SCS x 3 Stainless Steel Drive Shaft T5215SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G1-75 for Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive includes a T II, SC dapter & Hardware Kit and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-75

76 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T5215H, Position B & D G1-76

77 SELECTION/DIMENSIONS Mount Dimensions - T5215H, Position B & D (1) Frame Lateral djustment Mount 182T & 184T 213T & 215T 254T & 256T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M Frame Lateral djustment Mount 284T & 286T 324T & 326T 364T & 365T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-77

78 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T5215H, Position & C MX CENTES MIN CENTERS POSITION MIN CENTERS 2.29 MX CENTERS POSITION C M2 M3 M2 M4 M3 M C INPUT SHFT B G1-78

79 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T5215H, Position & C Frame Lateral djustment Mount 182T & 184T 213T & 215T 254T & 256T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Mounting Lateral djustment B Min B Max C Min C Max Position Position C Frame Mount 284T & 286T 324T & 326T 364T & 365T Height Min Max Min Max Min Max M M M M M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 *** M4 M4 M3 M2 M2 M *** *** M4 M4 M3 M3 M2 M *** *** M4 M4 M3 M3 M3 M *** *** *** *** M4 M3 M3 M3 (1) For U Or Flared Trough Ends Per CEM TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-79

80 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - T6307H, Single nd Double Reduction /8 BOLT MIN MX o 4 HOLES, 1/2-13x1.12 o ON B.C REDUCER WITH BCKSTOP 2-3/16" DI SHFT 1/2 x 1/2 x 6 KEY * 1.81 MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 3/4-10 NC x 1.25 DEEP FLNGE MOUNTING DIMENSIONS * END OF BERING ON DRIVEN SHFT 3-7/16" MX G1-80

81 SELECTION/DIMENSIONS Taper Bushed s - T6307H, Single nd Double Reduction T6307H Taper Bushed s (1) T6307H ccessories Size Part Number GM Code ctual Ratio Weight lbs. Description Part Number T6307H S T6307R Rod ssembly (1) T6307H D T6307BS Backstop ssembly T6307H D T6307BS 25:1 & 40:1 Backstop ssembly T6307H D T6307MM Mount ssembly ( T) (3) T6307H D T6307BG Belt Guard - Pos. B ( T) (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. (5) (6) T6307H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Shaft Keyseat Weight Required Part Weight Standard Shaft Number Short Shaft Required lbs. Number lbs. (7) (9) (10) (9) (10) Bushing Kit Bushing Kit (8) T6307TB x 3-7/ /8 x 7/16 x T6307TBS x 3-7/ /8 x 7/16 x 6.72 T6307TB x 3-3/ /4 x 3/8 x T6307TBS x 3-3/ /4 x 3/8 x 6.72 T6307TB x /4 x 3/8 x T6307TBS x /4 x 3/8 x 6.72 T6307TB x 2-15/ /4 x 3/8 x T6307TBS x 2-15/ /4 x 3/8 x 6.72 T6307TB x 2-7/ /4 x 3/8 x T6307TBS x 2-7/ /4 x 3/8 x 6.72 T6307TB x 2-11/ /8 x 5/16 x T6307TBS x 2-11/ /8 x 5/16 x 6.72 T6307TB x 2-1/ /8 x 5/16 x T6307TBS x 2-1/ /8 x 5/16 x 6.72 T6307TB x 2-7/ /8 x 5/16 x T6307TBS x 2-7/ /8 x 5/16 x 6.72 T6307TB x 2-3/ /8 x 5/16 x T6307TBS x 2-3/ /8 x 5/16 x 6.72 T6307TB x 2-1/ /2 x 1/4 x T6307TBS x 2-1/ /2 x 1/4 x 6.72 T6307TB x 2-3/ /2 x 1/4 x T6307TBS x 2-3/ /2 x 1/4 x 6.72 GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (8) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Weight lbs. T6307BG Belt Guard - Pos. C ( T) (4) T6307BG Belt Guard - Pos. D ( T) T6307CF Cooling Fan ssembly See page G1-122 for Maximum Bore Straight Bore T II s T4-T12 Vertical Breather Kit Rod ssembly mounting locations are limited to positions shown in drawing. T6307H V-Ring Kit Filter Breather Kit T6307H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications See page G1-120 for cooling fan dimensions TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-81

82 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Screw Conveyor Drive - T6307H, Single nd Double Reduction G G BOLT Dia. H F 5.95 C D D B Dia. E G1-82

83 SELECTION/DIMENSIONS Screw Conveyor Drive - T6307H, Single nd Double Reduction T6307H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 12, / / /8 12, 14, 16,18, / /4 18, 20, / / /4 (1) (4) (5) T6307H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T6307SC dapter & Hardware Kit T6307SCP djustable Packing Kit (3) T6307SCS x 2-7/16 Drive Shaft T6307SCS x 3 Drive Shaft T6307SCS x 3-7/16 Drive Shaft T6307SCS x 2-7/16 Stainless Steel Drive Shaft T6307SCS x 3 Stainless Steel Drive Shaft T6307SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G1-83 for Belt Guard for Screw Conveyor Drive applications SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals (4) SCS Drive Shaft is a shaft only. Hardware is stocked with the adapter & hardware kit (5) complete T II Screw Conveyor Drive includes a T II, SC dapter & Hardware Kit and SCS Drive Shaft. The SCP djustable Packing Kit is an optional accessory. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-83

84 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T6307H, Position B & D MIN CENTERS MX CENTERS POSITION B MX CENTERS MIN CENTERS POSITION D M2 M3 M2 M C B INPUT SHFT G1-84

85 SELECTION/DIMENSIONS Mount Dimensions - T6307H, Position B & D (1) Frame Lateral djustment Mount 182T & 184T 213T & 215T 254T & 256T 284T & 286T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 324T & 326T 364T & 365T 404T & 405T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-85

86 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T6307H, Position & C MX CENTERS MIN CENTERS POSITION MIN CENTERS MX CENTERS POSITION C M2 M3 M4 M2 M3 M C B INPUT SHFT G1-86

87 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T6307H, Position & C Mounting B Min Lateral djustment B Min C Min C Min Position Position C Mounting B Min Lateral djustment B Max C Min Mount Height Frame 182T & 184T 213T & 215T 254T & 256T 284T & 286T Min Max Min Max Min Max Min Max M M M M M M C Max Position Position C Mount Height Frame 324T & 326T 364T & 365T 404T & 405T Min Max Min Max Min Max M M M M M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Trough Height Minimum Mounting Position Dia Dim T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 *** M4 M4 M3 M2 M2 M *** *** M4 M4 M3 M3 M2 M *** *** M4 M4 M3 M3 M3 M *** *** *** *** M4 M3 M3 M3 (1) For U Or Flared Trough Ends Per CEM TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-87

88 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - T7315H, Single nd Double Reduction 3/4 BOLT MIN MX o /16" DI. SHFT 5/8 x 5/8x 6 KEY 4 HOLES, 1/2-13x1.12 o ON B.C. Dia REDUCER WITH BCKSTOP * 2.06" MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 3/4-10 NC x 1.25 DEEP * END OF BERING ON DRIVEN SHFT FLNGE MOUNTING DIMENSIONS 4-7/16" MX G1-88

89 SELECTION/DIMENSIONS Taper Bushed s - T7315H, Single nd Double Reduction T7315H Taper Bushed s (1) Size Part Number GM Code ctual Ratio Weight lbs. T7315H ccessories Description Part Number T7315H S T7315/8407R Rod ssembly (1) T7315H D T7315BS Backstop ssembly T7315H D T7315/9415BS 40:1 Backstop ssembly T7315H D T7315/8407MM Mount ssembly ( T) (3) T7315H D T7315/8407BG Belt Guard - Pos. B ( T) (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. (5) (6) T7315H Tapered Bushing Kits Bushing Size Part Shaft Keyseat Bushing Size Shaft Weight Part Weight Standard Shaft Number Required Short Shaft Keyseat Required (7) lbs. Number lbs. Bushing Kit (10) Bushing Kit (8) (9) (10) T7315TB x 4-7/ x 1/2 x T7315TB x 4-3/ x 1/2 x T7315TB x 3-15/ x 1/2 x T7315TBS x 3-15/ x 1/2 x 7.62 T7315TB x 3-7/ /8 x 7/16 x T7315TBS x 3-7/ /8 x 7/16 x 7.62 T7315TB x 3-3/ /4 x 3/8 x T7315TBS x 3-3/ /4 x 3/8 x 7.62 T7315TB x /4 x 3/8 x T7315TBS x /4 x 3/8 x 7.62 T7315TB x 2-15/ /4 x 3/8 x T7315TBS x 2-15/ /4 x 3/8 x 7.62 T7315TB x 2-7/ /4 x 3/8 x T7315TBS x 2-7/ /4 x 3/8 x 7.62 T7315TB x 2-11/ /8 x 5/16 x T7315TBS x 2-11/ /8 x 5/16 x 7.62 T7315TB x 2-1/ /8 x 5/16 x T7315TBS x 2-1/ /8 x 5/16 x 7.62 T7315TB x 2-7/ /8 x 5/16 x T7315TBS x 2-7/ /8 x 5/16 x 7.62 GM maximum bore size (5) Bushing kit required to mount T II reducer to driven shaft (6) Bushing Kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (7) Standard Shaft Bushing Kit includes two standard bushings with backup plates and snap rings; hardware and one key (8) Short Shaft Bushing Kit includes one standard bushing; one long bushing with mounting wedge; two backup plates with snap rings; hardware and one key. This is an optional bushing for after market, short shaft mounting (9) Minimum keyseat and shaft length required to mount reducer with bushing kit (10) lways check the driven shaft and key for strength Weight lbs. T7315/8407BG Belt Guard - Pos. C ( T) (4) T7315/8407BG Belt Guard - Pos. D ( T) T7315/8407CF Cooling Fan ssembly T4-T12 Vertical Breather Kit Rod ssembly mounting locations are limited to positions shown in drawing. T7315/8407H V-Ring Kit Filter Breather Kit T7315H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions (4) Use Position-C belt guard for T II reducer in screw conveyor drive applications See page G1-120 for cooling fan dimensions TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-89

90 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Screw Conveyor Drive - T7315H, Single nd Double Reduction G1-90

91 SELECTION/DIMENSIONS Screw Conveyor Drive - T7315H, Single nd Double Reduction T7315H Screw Conveyor Drive Dimensions Drive Dimensions Screw Shaft Hole Bolt Dia B C D F G Dia Dia E Dia H 12, / / /8 12, 14, 16, 18, / /4 18, 20, / / /4 (1) (4) (5) T7315H ccessories for Screw Conveyor Drives Description Part Number Weight lbs. T7315SC dapter & Hardware Kit T7315SCP djustable Packing Kit (3) T7315SCS x 2-7/16 Drive Shaft T7315SCS x 3 Drive Shaft T7315SCS x 3-7/16Drive Shaft T7315SCS x 2-7/16 Stainless Steel Drive Shaft T7315SCS x 3 Stainless Steel Drive Shaft T7315SCS x 3-7/16 Stainless Steel Drive Shaft (1) See page G1-91 for Belt Guard for Screw Conveyor Drive applications. SC dapter & Hardware Kit includes adapter, mounting wedge, keeper plate, key, seals and hardware. (3) SCP djustable Packing Kit consists of flange, mounting hardware and braided packing seals. (4) SCS Drive Shaft is a shaft only. Mounting hardware is stocked with the adapter & hardware kit. (5) complete T II Screw Conveyor Drive includes a T II, SC dapter & Hardware Kit, and SCS Drive Shaft. The SCP djustable Packing kit is an optional accessory TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-91

92 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T7315H, Position B & D MIN CENTERS MIN CENTERS POSITION D MX CENTERS POSITION B MX CENTERS M2 M3 M M C B INPUT SHFT G1-92

93 SELECTION/DIMENSIONS Mount Dimensions - T7315H, Position B & D (1) Frame Lateral djustment Mount 213T & 215T 254T & 256T 284T & 286T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 324T & 326T 364T & 365T 404T & 405T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-93

94 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T7315H, Position & C MX CENTERS MIN CENTERS POSITION MIN CENTERS 3.71 MX CENTERS POSITION C M2 M3 M M2 M3 M C B INPUT SHFT G1-94

95 SELECTION/DIMENSIONS (1) (3) Mount Dimensions - T7315H, Position & C Frame Lateral djustment Mount 213T & 215T 254T & 256T 284T & 286T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Frame Lateral djustment Mount 324T & 326T 364T & 365T 404T & 405T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Notes: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3, M4 go through output shaft centerline (3) See Table, below, for minimum M mounting position required for specific screw diameter and reducer size Table - Screw Conveyor Mount Minimum M Mounting Positions (1) Nominal Screw Dia Trough Height Dim Minimum Mounting Position T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H M2 M3 M2 M2 M M3 M4 M3 M3 M2 M2 M M4 M4 M3 M3 M2 M2 M M4 M4 M4 M3 M3 M2 M2 M M4 *** M4 M4 M3 M2 M2 M *** *** M4 M4 M3 M3 M2 M *** *** M4 M4 M3 M3 M3 M *** *** *** *** M4 M3 M3 M3 (1) For U Or Flared Trough Ends Per CEM TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-95

96 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - T8407H, Double Reduction 3/4 BOLT MIN MX Dia REDUCER WITH BCKSTOP 90 o /16" DI. SHFT 5/8 X 5/8 x 6-3/4 KEY 4 HOLES, 1/2-13x1.12 o ON B.C. * 2.06" MINIMUM DISTNCE FOR BUSHING SCREW REMOVL o 3/4-10 NC x 1.25 DEEP FLNGE MOUNTING DIMENSIONS * END OF BERING ON DRIVEN SHFT 4-7/16" MX G1-96

97 SELECTION/DIMENSIONS Taper Bushed s - T8407H, Double Reduction T8407H Taper Bushed s (1) T8407H ccessories Part GM ctual Weight Part Weight Description Size Number Code Ratio lbs. Number lbs. T8407H D T7315/8407R Rod ssembly (1) T8407H D T8407BS Backstop ssembly T8407H D T8407BS 40:1 Backstop ssembly (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. + Rod ssembly mounting locations are limited to positions shown in drawing. T8407H Tapered Bushing Kits (4) (5) T7315/8407MM Mount ssembly ( T) (3) T7315/8407BG Belt Guard - Pos. B ( T) T7315/8407BG Belt Guard - Pos. C ( T) T7315/8407BG Belt Guard - Pos. D ( T) T7315/8407CF Cooling Fan ssembly T8407SC dapter & Hardware Kit T4-T12 Vertical Breather Kit T7315/8407H V-Ring Kit Filter Breather Kit T8407H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions See page G1-120 for cooling fan dimensions SC dapter & Hardware Kit is available for T8407H reducers as a nonstock product. Consult DODGE about SCS Drive Shafts. Bushing Size Part Shaft Keyseat Bushing Size Shaft Keyseat Weight Part Weight Standard Shaft Number Required Short Shaft lbs. Number lbs. Required (6) (8) (9) (8) (9) Bushing Kit Bushing Kit (7) T8407TB x 4-7/ x 1/2 x T8407TBS x 4-7/ x 1/2 x 8.10 T8407TB x 4-3/ x 1/2 x T8407TBS x 4-3/ x 1/2 x 8.10 T8407TB x 3-15/ x 1/2 x T8407TBS x 3-15/ x 1/2 x 8.10 T8407TB x 3-7/ /8 x 7/16 x T8407TBS x 3-7/ /8 x 7/16 x 8.10 T8407TB x 3-3/ /4 x 3/8 x T8407TBS x 3-3/ /4 x 3/8 x 8.10 T8407TB x /4 x 3/8 x T8407TBS x /4 x 3/8 x 8.10 T8407TB x 2-15/ /4 x 3/8 x T8407TBS x 2-15/ /4 x 3/8 x 8.10 GM maximum bore size (4) Bushing kit required to mount T II reducer to driven shaft (5) Bushing kit is not required to mount T II reducer on SCS Drive Shaft in a screw conveyor application (6) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (7) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (8) Minimum keyseat and shaft length required to mount reducer with bushing kit (9) lways check the driven shaft and key for strength TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-97

98 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T8407H, Position B & D G1-98

99 SELECTION/DIMENSIONS Mount Dimensions - T8407H, Position B & D (1) Frame Lateral djustment Mount 213T & 215T 254T & 256T 284T & 286T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Frame Lateral djustment Mount 324T & 326T 364T & 365T 404T & 405T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M M Position D M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-99

100 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T8407H, Position & C G1-100

101 SELECTION/DIMENSIONS Mount Dimensions - T8407H, Position & C (1) Frame Lateral djustment Mount 213T & 215T 254T & 256T 284T & 286T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Frame Lateral djustment Mount 324T & 326T 364T & 365T 404T & 405T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position M M M Position C M M M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-101

102 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - T9415H, Double Reduction G1-102

103 SELECTION/DIMENSIONS Taper Bushed s - T9415H, Double Reduction T9415H Taper Bushed s (1) Size Part Number GM Code ctual Ratio Weight lbs. T9415H ccessories Description Part Number T9415H D T9415R Rod ssembly (1) T9415H D T9415BS Backstop ssembly T9415H D T7315/9415BS 40:1 Backstop ssembly (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. Weight lbs. T9415MM Mount ssembly ( T) (3) T9415BG Belt Guard - Pos. B ( T) T9415BG Belt Guard - Pos. D ( T) T9415CF Cooling Fan ssembly Rod ssembly mounting locations are limited to positions shown in drawing. T4-T12 Vertical Breather Kit T9415H V-Ring Kit Filter Breather Kit T9415H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off T9415H Tapered Bushing Kits (4) Bushing Size Standard Shaft Bushing Kit Part Number (5) Weight lbs. Shaft Keyseat Required (7) (8) (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions See page G1-120 for cooling fan dimensions Bushing Size Short Shaft Bushing Kit (6) Part Number Weight lbs. Shaft Keyseat Required (7) (8) T9415TB x 4-15/ /4 x 5/8 x T9415TBS x 4-15/ /4 x 5/8 x 8.56 T9415TB x 4-7/ x 1/2 x T9415TBS x 4-7/ x 1/2 x 8.56 T9415TB x 4-3/ x 1/2 x T9415TBS x 4-3/ x 1/2 x 8.56 T9415TB x 3-15/ x 1/2 x T9415TBS x 3-15/ x 1/2 x 8.56 T9415TB x 3-7/ /8 x 7/16 x T9415TBS x 3-7/ /8 x 7/16 x 8.56 GM maximum bore size (4) Bushing kit required to mount T II reducer to driven shaft (5) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (6) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (7) Minimum keyseat and shaft length required to mount reducer with bushing kit (8) lways check the driven shaft and key for strength TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-103

104 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T9415H, Position B & D G1-104

105 SELECTION/DIMENSIONS Mount Dimensions - T9415H, Position B & D (1) Frame Lateral djustment Mount 254T & 256T 284T & 286T 324T & 326T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D M Frame Lateral djustment Mount 364T & 365T 404T & 405T 444T & 445T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-105

106 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - T10507H, Double Reduction G1-106

107 SELECTION/DIMENSIONS Taper Bushed s - T10507H, Double Reduction T10507H Taper Bushed s (1) Size Part Number GM Code ctual Ratio Weight lbs. T10507H ccessories Description Part Number T10507H D T10507R Rod ssembly (1) T10507H D T10507BS Backstop ssembly T10507H D T10507BS 40:1 Backstop ssembly (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. Weight lbs. T10507MM Mount ssembly ( T) (3) T10507BG Belt Guard - Pos. B ( T) T10507BG Belt Guard - Pos. D ( T) T10507CF Cooling Fan ssembly Rod ssembly mounting locations are limited to positions shown in drawing. T4-T12 Vertical Breather Kit T10507H V-Ring Kit Filter Breather Kit T10507H Lube Kit LUBEKITT T10507H Tapered Bushing Kits (4) Bushing Size Part Number Weight Standard Shaft lbs. Bushing Kit Shaft Keyseat Required See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions See page G1-120 for cooling fan dimensions Bushing Size Short Shaft Bushing Kit (6) Part Number Weight lbs. Shaft Keyseat Required (5) (7) (8) (7) (8) T10507TB x /2 x 3/4 x T10507TB x 5-15/ /2 x 3/4 x T10507TB x 5-7/ /4 x 5/8 x T10507TBS x 5-7/ /4 x 5/8 x 9.67 T10507TB x 4-15/ /4 x 5/8 x T10507TBS x 4-15/ /4 x 5/8 x 9.67 T10507TB x 4-7/ x 1/2 x T10507TBS x 4-7/ x 1/2 x 9.67 T10507TB x 4-3/ x 1/2 x T10507TBS x 4-3/ x 1/2 x 9.67 T10507TB x 3-15/ x 1/2 x T10507TBS x 3-15/ x 1/2 x 9.67 GM maximum bore size (4) Bushing kit required to mount T II reducer to driven shaft (5) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (6) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (7) Minimum keyseat and shaft length required to mount reducer with bushing kit (8) lways check the driven shaft and key for strength TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-107

108 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T10507H, Position B & D G1-108

109 SELECTION/DIMENSIONS Mount Dimensions - T10507H, Position B & D (1) Frame Lateral djustment Mount 254T & 256T 284T & 286T 324T & 326T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D M Frame Lateral djustment Mount 364T & 365T 404T & 405T 444T & 445T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D M Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-109

110 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Taper Bushed s - T12608H, Double Reduction G1-110

111 SELECTION/DIMENSIONS Taper Bushed s - T12608H, Double Reduction T12608H Taper Bushed s (1) Part GM Number Code ctual Ratio Weight lbs. T12608H ccessories Part Number Size Description T12608H D T12608R Rod ssembly (1) T12608H D T12608BS Backstop ssembly T12608H D T12608BS 40:1 Backstop ssembly (1) s are supplied from stock ready for vertical mounting and for flange mounting. Rod assembly is not included with reducer. Order as a separate part number. + Rod ssembly mounting locations are limited to positions shown in drawing. T12608H Tapered Bushing Kits (4) Bushing Size Part Standard Shaft Number (5) Bushing Kit Weight lbs. Shaft Keyseat Required (7) (8) Weight lbs. T12608MM Mount ssembly ( T) (3) T12608BG Belt Guard - Pos. B ( T) T12608BG Belt Guard - Pos. D ( T) T12608CF Cooling Fan ssembly T4-T12 Vertical Breather Kit T12608H V-Ring Kit Filter Breather Kit T12608H Lube Kit LUBEKITT See page G1-128 for input shaft speed necessary for backstop sprag lift-off (3) Mount will fit NEM and IEC frame motors; however hardware are inch dimensions See page G1-120 for cooling fan dimensions Bushing Size Short Shaft Bushing Kit (6) Part Number Weight lbs. Shaft Keyseat Required (7) (8) T12608TB x /4 x 3/4 x T12608TB x 6-1/ /2 x 3/4 x T12608TBS x 6-1/ /2 x 3/4 x T12608TB x 6-7/ /2 x 3/4 x T12608TBS x 6-7/ /2 x 3/4 x T12608TB x /2 x 3/4 x T12608TBS x /2 x 3/4 x T12608TB x 5-15/ /2 x 3/4 x T12608TBS x 5-15/ /2 x 3/4 x T12608TB x 5-7/ /4 x 5/8 x T12608TBS x 5-7/ /4 x 5/8 x T12608TB x 4-15/ /4 x 5/8 x T12608TBS x 4-15/ /4 x 5/8 x GM maximum bore size (4) Bushing kit required to mount T II reducer to driven shaft (5) Standard Shaft Bushing Kit includes two standard bushings with back-up plates and snap rings; hardware, and key (6) Short Shaft Bushing Kit includes one standard bushing, one long bushing with insertable wedge; two back-up plates with snap rings; hardware and key. This is an optional bushing for after market, short shaft mounting. (7) Minimum keyseat and shaft length required to mount reducer with bushing kit (8) lways check the driven shaft and key for strength TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-111

112 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Mount Dimensions - T12608H, Position B & D G1-112

113 SELECTION/DIMENSIONS Mount Dimensions - T12608H, Position B & D (1) Frame Lateral djustment Mount 254T & 256T 284T & 286T 324T & 326T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D Frame Lateral djustment Mount 364T & 365T 404T & 405T 444T & 445T Mounting Height B Min B Max C Min C Max Min Max Min Max Min Max Position B M Position D Note: Minimum centers contains 0.5 to allow for belt assembly (1) mount will fit NEM and IEC frame motors; hardware are inch dimensions, M2, M3 go through output shaft centerline TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-113

114 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Belt Guard Dimensions, T0107L - T5215H G1-114

115 SELECTION/DIMENSIONS Belt Guard Dimensions, T0107L - T5215H Case Mounting Max Sheave Dia. Size Position Min Max B C T0107L B C T1107H B C T2115H B C T3203H B C T4207H B C T5215H B C Case Mounting E D Size Position Min Max F H J T0107L B C T1107H B C T2115H B C T3203H B C T4207H B C T5215H B C Notes: 1. Minimum centers allow 0.5 for belt assembly 2. Maximum sheave diameters allow 0.5 clearance for belt assembly 3. Range of center distances on belt guard may be less than the full range of center distances available on the motor mount 4. Belt guard cover is lift-off cover construction 5 Belt guard attaches to motor mount brackets 6. E maximum dimension allows clearance for cooling fan 7. Stock Position-B Belt Guards cannot be used with T II s mounted in D position. Use a Position-D Belt Guard 8. Stock Position-C Belt Guards cannot be used with T II s mounted in position. special belt guard is required. Consult DODGE for price and delivery. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-115

116 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Belt Guard Dimensions, T6307H - T12608H G1-116

117 SELECTION/DIMENSIONS Belt Guard Dimensions, T6307H - T12608H Case Mounting Max Sheave Dias. B Size Position Min Max C T6307H B C T7315H B C T8407H B C T9415H B T10507H B T12608H B Case Mounting E D Size Position Min Max F H J T6307H B C T7315H B C T8407H B C T9415H B T10507H B T12608H B Notes: 1. Minimum centers allow 0.5 for belt assembly 2. Maximum sheave diameters allow 0.5 clearance for belt assembly 3. Range of center distances on belt guard may be less than the full range of center distances available on the motor mount 4. Belt guard cover is lift-off cover construction 5. Belt guard attaches to motor mount brackets 6. E maximum dimension allows clearance for cooling fan 7. Stock Position-B Belt Guards cannot be used with T II s mounted in D position. Use a Position-D Belt Guard 8. Stock Position-C Belt Guards cannot be used with T II s mounted in position. special belt guard is required. Consult DODGE for price and delivery. TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-117

118 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 SELECTION/DIMENSIONS Cooling Fan Dimensions, T4207H - T12608H When the thermal capacity of a TORQUE-RM II reducer is exceeded, cooling fans provide an optional, inexpensive way of lowering the oil temperature, thus increasing the thermal horsepower capacity of the reducer. Selection tables indicate when a cooling fan is required. The computer designed fan assembly, which fastens to the input shaft, is compact enough to allow installation of the V-drive originally designed for the reducer. The fan assem blies Figure 1 - Cooling Fan ssembly Pump and uxiliary Cooling Package For thermal capacities beyond the range of cooling fans, an optional pump and cooler auxiliary cooling package is available to prevent overheating the reducer and allow the use of full mechanical HP rating by lowering the oil temper ature to an acceptable level. are designed to allow free circulation of air at the back of the housing as well as through the front of the unit. The fan blade offers a radial streamline airflow, which means smaller fans yet a more efficient movement of air. See Figure 1 and Table 1 for cooling fan installation dimensions. For thermal capacities beyond the range of cooling fans, pump and cooler auxiliary cooling packages may be used. Note: See page G1-127 for maximum input shaft speeds. Table 1 - Cooling Fan Installation Dimensions Dia. B C D T4207H T5215H T6307H T7315H T8407H T9415H T10507H T12608H See individual reducer pages for cooling fan part numbers Specifications for the heat exchanger are as follows: 1/2 HP, 60 Hz, 3 PH. 230/460 Volt, TEFC, 56 Frame. Max imum coolant (water) flow is 3 G.P.M. based upon a maxi mum water temperature of 80 degrees F. Minimum oil temperature for operation is 60 degrees F. Figure 2 - Pump and uxiliary Cooling Package, Part Number G1-118

119 RELTED PRODUCTS Harsh Duty ccessories XT Safety & Sealing nd XT Hostile Environment Metal End Covers (1) Table 3 Size End Cover Part Numbers Size B C D E F Weight Closed Weight Split T0107L T0107L T1107H T1107H T2115H T2115H T3203H T3203H T4207H T4207H T5215H T5215H T6307H T6307H T7315H T7315H T8407H T8407H T9415H T9415H T10507H T10507H T12608H T12608H (1) End covers fit both the input side and back stop side of T II reducer. See Drawing and Table 3 for dimensions. If a T II Belt Guard is used, an end cover for the input side of the reducer is not needed and will not fit. Optional V-Ring Flinger Seal Kit For Harsh Duty Environments (1) Part Size Number Weight T0107L T1107H T2115H T3203H T4207H T5215H T6307H T7315H T8407H T9415H T10507H T12608H (1) Consists of 1 input and 2 output V-ring seals which fit in seal OD of housing; provides additional sealing protection for keeping contaminants out of reducer. Drawing - Metal End Cover Metal End Covers TIGER-2 MXUM TORQUE-RM TORQUE-RM II Gearing Reference Guide G1-119

120 Gearing Reference Guide TORQUE-RM II TORQUE-RM MXUM TIGER-2 RELTED PRODUCTS Harsh Duty ccessories Enclosed Breather Chamber Oil Sump Immersion Heaters Part Size Number Size Part Number T0-T T0 - T3 Not vailable T10-T T (3) T5-T Filter Breather (1) T7-T T10 - T12 Consult DODGE Size T0-T3 Part Number volt single phase, C cartridge heater, threads into tapped housing hole. Provides for approximately 70 degrees (F) temperature rise in one hour for cold climates. Simple time phased on/off construction T4-T without thermostat. (3) has to be factory modified to allow installation of sump heater. (1) 40 micron mesh opening in filter allows reducer to breathe, yet keep dust out, under the most extreme conditions. mounting position will determine modification requirement. Consult DODGE. Filter Breather TDNC Coated Tapered Bushings (Thin Dense Nickel Chrome) Oil Sump Heater TDNC coated for maximum corrosion resistance with minimum premium cost adder TDNC bushings, backing plates and snap rings Corrosion resistant bolts and lock washers T II has the highest average HP ratings per case size in its class Meets or exceeds GM standards 36 / 18 month warranty G1-120