Series F Shaft Mounted Helical

Size: px

Start display at page:

Download "Series F Shaft Mounted Helical"

Caitlin Webster
5 years ago
Views:

1 Series F Shaft ounted Helical Technical Up to kw / 16,500 Nm Geared otors CF-2.01GB1

ATEX Compliance Assured Total compliance with the ATEX Directive safeguarding the use of industrial equipment in potentially explosive atmospheres is assured for users of our

2 ATEX Compliance Assured Total compliance with the ATEX Directive safeguarding the use of industrial equipment in potentially explosive atmospheres is assured for users of our geared products. equipment group/category. suppliers of electrical and non-electrical equipment for use in 2 or 3 for surface industries in designated hazardous location 22 for dusts.

3 NOTES

4 CONTENTS PAGE General Description 1 Unit Designations 2 Explanation and use of Ratings and Service Factors 3 4 Selection Procedure For otorised Units 5-6 Options ounting Positions 13 OTORISED otor Performance Data 15 otor Details Exact Ratios Dimensions otorised otorised Backstop odule 73 Dimensions otorised Options 74 REDUCER 77 Thermal Power Ratings Triple Reduction Ratings Quadruple Reduction Ratings Dimensions Reducer Fan Cooled Units 98 Reducer Backstop odulle Torque Bush 102 Dimensions D Flange 103 Dimensions C Flange

5 GENERAL DESCRIPTION Series F Series F shaft mounted geared motors offer ratios as a shaft mounted unit incorporating an integral The Range Includes Ten sizes of units * reducer shaft mount * IEC motor Design Features Include Patented standard motor connection * * otorised quadruple shaft mount Reducer quadruple shaft mount * 1

6 UNIT DESIGNATIONS * otor Codes Series Size of Unit No of Reductions Revision Version Nominal Overall Ratio Unit Version Shaft ounting Position Geared otor Power No of otor Poles F 1 - Series F Range F 20 - Backstop etc 19 - Size of Unit 0 2 Through No of Reductions 2 Through Revision Version 2 For Sizes 02 to 08 1 For Sizes 09 to 12 Nominal Overall Ratio 9 - Unit Version Standard Unit with Torque Bush STD Unit with Flange T F 18 - No of otor Poles - No motor 2 Pole 3000 rpm E 3600 rpm F S Dual speed or special motor Geared otor Powers otor Power Required For reducer and non standard 10 - R S - otorised with IE2 standard motor - Reducer unit - Reducer unit with fan kit F02 - F10 ounting Position Standard Single Extension C 2

7 echanical ratings and service factors Fm and Fs Table 1. echanical Service Factor (Fm) EXPLANATION & USE OF RATINGS & SERVICE FACTORS Prime mover Duration of service- hrs Uniform oderate mass acceleration mass acceleration factor < factor < 3 mass acceleration factor < 10 all external moments of inertia * * calculated with reference to moment of inertia of driving motor the motor speed Table 2. Number of Starts Factor (Fs) Start / Stops Up to > 200 3

8 LOAD CLASSIFICATION BY APPLICATIONS Table 3 U = Uniform load = oderate shock load H = Heavy shock load = Refer to Application Engineering Driven achine Agitators pure liquids liquids and solids Blowers centrifugal vane Brewing and distilling scale hopper-frequent starts Cane knifes Car dumpers Car pullers Clay working machinery pug mill U U U U Compressors centrifugal U reciprocating Conveyors-uniformly loaded or fed apron chain oven screw Conveyors-heavy duty not uniformly fed apron chain live roll oven screw type of load U U U U Driven achine type of Driven achine type of Driven achine load load Cranes main hoists Crusher Dredges manoeuvring winches pumps stackers Dry dock cranes main hoist Elevators centrifugal discharge escalators freight man lifts passenger Fans centrifugal cooling towers induced draft forced draft induced draft Feeders apron disc screw Food industry cereal cooker dough mixer meat grinders Generators-not welding Hammer mills U U U U U Hoists skip hoist Laundry washers reversing Laundry tumblers Line shafts driving processing equipment light other line shafts Lumber industry mechanical edger feed gang feed green chain U U U planer feed chains planer tilting hoist small waste small waste tipple hoist drive transfer rolls trimmer feed achine tools driven other machine tools main drives etal mills and main drive slitters non-reversing group drives reversing wire drawing and wire winding machine ill-rotary type ball rod ixers concrete mixers -continuous concrete mixers -intermittent Oil industry chillers oil well pumping Paper mills calenders couch felt stretcher jordans presses pulp machine reel stock chest suction roll washers and thickeners winders Printing presses Pullers Pumps centrifugal U proportioning reciprocating single acting; 3 or single acting; 1 or 2 Rubber and plastics industries sheeter openers warming mills Sand muller Sewage disposal equipment chemical feeders collectors dewatering screws slow or rapid mixers thickeners U U Screens air washing U travelling water intake U Slab pushers Steering gear Stokers Sugar industry cane knives crushers mills Textile industry calenders cards knitting machines looms mangles nappers pads range drives slashers soapers spinners tenter frames washers winders Windlass type of load U 4

9 SELECTION PROCEDURE FOR OTORISED UNITS EXAPLE o C 1 Conveyors-uniformly loaded or fed apron U chain U 2 DETERINE REQUIRED OUTPUT TORQUE 63 Prime mover or Duration of service- Uniform oderate kw N2 R/IN i 2 Nm Fm N Kg 4 POLE Ratio Torque Service Factor Overhung Load Base ount Unit otor Frame Size kw N2 R/IN i 2 Nm Fm N Kg 4 POLE Ratio Torque Service Factor Overhung Load Base ount Unit otor Frame Size Go to point 5 5

10 SELECTION PROCEDURE FOR OTORISED UNITS kw N2 R/IN i 2 Nm Fm N Kg 4 POLE Ratio Torque Service Factor Overhung Load Base ount Unit otor Frame Size 0.75 kw N2 R/IN i 2 Nm Fm N Kg 4 POLE Ratio Torque Service Factor Overhung Load Base ount Unit otor Frame Size kw N2 R/IN i 2 Nm Fm N Kg 4 POLE Ratio Torque Service Factor Overhung Load Base ount Unit otor Frame Size o C 6

11 OUTPUT OPTIONS OUTPUT BORE OPTIONS, COLUN 11 ENTRY Column 11 Entry m1 m2 m3 Ø D U T Shaft Bore Setscrew - V3 Inch Taper Release F02 F03 F04 F05 F06 F07 F08 F09 F10 F11 F12 COL 11 DIENSIONS BORE Ø D m1 m2 m3 T U v3 Standard x50 Inch Standard x50 Inch Standard x55 Inch Standard x70 Inch Standard x70 Inch Standard x70 Inch Standard x80 Inch Standard x80 Inch - Standard x80 Inch - Standard Inch Standard Inch

12 OUTPUT OPTIONS OUTPUT SHAFT OPTIONS COLUN 11 ENTRY Column 11 Entry L11 L12 t Standard Single Extension Inch Single Extension C N u d ø L F02 F03 F04 F05 F06 F07 F08 F09 F10 F11 F12 COL 11 DIENSIONS BORE Ø D L L11 L12 t u w Standard C Inch N Standard C x22 Inch N * Standard C x28 Inch N * Standard C x36 Inch N * Standard C x36 Inch N * Standard C x36 Inch N * Standard C x42 Inch N * Standard C x42 Inch N * Standard C x42 Inch N * Standard C x42 Inch Standard C x55 Inch

13 DOUBLE REDUCTION UNITS IEC Flanges B14 Column 12 entry for units type G (Column 10) OTOR / FRAE FLANGE UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER F0222 F0322 F0422 F0522 F0622 F *B *K B K - G - G - G 90 *D *R D R J J - J 100 *E *S E S B L B L B L 112 *E *S E S B L B L B L D N IEC Flanges B5 Column 12 entry for units type G (Column 10) OTOR ADAPTERS otor codes marked with * are not suitable for use with Kibo Bushing Limited Availability / Non Preferred UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER OTOR / FRAE FLANGE RATIO COVERAGE F0222 F0322 F0422 F0522 F0622 F0722 F0822 F0921 F1021 F1121 F *F *F - F - V - V *G *G - G - D - D *J *J F F - F - D - E *C *Q *C *Q - - E - F K K K F - G - E - - COLUN 12 ENTRY K K K F - G - E N P N P C B G - - F E - C J G B B K B C B C - C - D C D - D - E D F E F NEA Flanges C face Column 12 entry for units type G (Column 10) UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER F0322 F0222 F0422 F0522 F0622 F0722 F0822 F0921 F1021 OTOR / FRAE FLANGE RATIO COVERAGE 56C *T *U T U - Q - Q - Q /145TC *U U - R - R - R - N COLUN 12 ENTRY 182/184TC - - S T S T S T J P - S - P 213/215TC U - U - U V K Q - T - Q 254/256TC L U P U L R 284/286TC Q V S 324/326TC R N T 9

14 TRIPLE REDUCTION UNITS IEC Flanges B14 Column 12 entry for units type G (Column 10) UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER OTOR ADAPTERS OTOR / FRAE FLANGE F0232 F0332 F0432 F0532 F0632 F0732 F *K K K K G G 90 *R R R R J J L L N otor codes marked with * are not suitable for use with Kibo Bushing Limited Availability / Non Preferred IEC Flanges B5 Column 12 entry for units type G (Column 10) UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER OTOR / FRAE FLANGE RATIO COVERAGE F0232 F0332 F0432 F0532 F0632 F0732 F0832 F0931 F1031 F1131 F *F F F F *G G G G *J J J J F F - E Q Q Q Q F - - COLUN 12 ENTRY K K N G K K N G B C J D B K E C D E NEA Flanges C face Column 12 entry for units type A (Column 10) UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER OTOR / FRAE FLANGE F0232 F0332 F0432 F0532 F0632 F0732 F0832 F0931 F C *U U U U Q Q - 143/145TC R R - 182/184TC T T S 213/215TC V - T 254/256TC U 284/286TC V 324/326TC

15 QUADRUPLE REDUCTION UNITS IEC Flanges B14 Column 12 entry for units type G (Column 10) UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER OTOR ADAPTERS OTOR / FRAE FLANGE F0342 F0442 F0542 F0642 F0742 F0842 F0941 F C C C C C C C K K K K G G G 90 R R R R J J J L L L L L L N Limited Availability / Non Preferred IEC Flanges B5 Column 12 entry for units type G (Column 10) UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER OTOR / FRAE FLANGE F0342 F0442 F0542 F0642 F0742 F0842 F0941 F C C C C C C C 63 F F F F V V - 71 G G G G D D - 80 J J J J F F F 90 Q Q Q Q K K K K K K P P NEA Flanges C face Column 12 entry for units type A (Column 10) UNIT SIZE, NUBER OF REDUCTIONS, REVISION NUBER OTOR / FRAE FLANGE F0342 F0442 F0542 F0642 F0742 F0842 F0941 F C C C C C C C 56C 143/145TC 182/184TC 213/215TC U U U U Q Q Q R R R T T T V 11

16 LUBRICATION - TEPERATURE LIITATIONS TABLE 1 OIL GRADES ABIENT TEPERATURE RANGE LUBRICANT -5 o C to 20 o C (type E) 0-30 o C to 20 o C (type H) o C to 35 o C EP ineral Oil 20 o C to 50 o C TABLE 2 Lubrication Quantity (Litres) DOUBLE REDUCTION Unit Size F0222 F0322 F0422 F0522 F0622 F0722 F0822 F0921 F1021 F1121 F1221 OUNTING POSITION TRIPLE REDUCTION Unit Size F0232 F0332 F0432 F0532 F0632 F0732 F0832 F0931 F1031 F1131 F1231 OUNTING POSITION Unit Size OUNTING POSITION Unit Size OUNTING POSITION QUADRUPLE REDUCTION F0342 F0442 F0542 F0642 F F F F F F QUADRUPLE REDUCTION..CONT F0842 F0941 F F F F o C and 35 o C 12

17 ounting Positions COLUN 13 ENTRY OUNTING POSITIONS * Unit Size < 1000 < 1500 < 1800 > 1800 F02 - F07 F0822 F0921 F1021 F1121 F1221 OUNTING POSITIONS - SHOWN AS OTORIZED - APPLIES ALSO FOR REDUCERS C COLUN 14 ENTRY D x B x Column 14 F02 F03 F04 F05 F06 B C D - Column 14 F07 B C D - 13

18 OTORISED 14

19 TEFC squirrel cage three phase motors 4 poles = 1500 rpm 400V, 50Hz, S1 IP55, Class F OTOR PERFORANCE DATA TEFC squirrel cage three phase motors 6 poles = 1000 rpm 400V, 50Hz, S1 IP55, Class F Power Kw Frame Size (RP) I (A) Ist Tst J Ist Tst J Power Frame I I T (Kgm2) Kw Size (RP) (A) I T (Kgm2) B S S L L L L L L L S S L L L L L L L L L L L L S S S S Recalculation Factors Recalculation factors for current at rated voltages other Rated voltage motor wound for 220V 230V 415V 500V 660V 690V Recalculation factor 60 Hz Operation - following changes in their data otor Connected P n I Ist/I T Tst/T wound for and rpm Nm 400V 380V V V V V V

20 B14 'C' FACE ko OTOR DETAILS g1 m øg6 øm øn ød øg g2 Øs e OTOR Øg6 Øm Øn Ød e ko* Øg g1* m Øs x x 6 80B x 6 90S x 8 90L x 8 100L x x 8 132S x x 10 B5 'D' FACE r ko g1 m øg6 øm øn ød øg g2 Øs OTOR e Øg6 Øm Øn Ød e ko* Øg g1* m Øs x x x 10 80B x 10 90S x 10 90L x L x x S x x x L x x L x L x S x x x S x x 16 16

21 ADDITIONAL OTOR FEATURES - COLUN 19 ENTRY ADDITIONAL OTOR FEATURES Brake otor Brake Forced Ventilation/ Constant Blower Thermistors Special - B C D E F G K L S - EExEIIT3 - IP56 - IP65 - etal fan cover - Rain cowl 17

22 ADDITIONAL GEARBOX FEATURES - COLUN 20 ENTRY ADDITIONAL GEARBOX FEATURES Seals ** Oil Level Glass - F10 F06 * otorised Backstop Special - B C D E F G I J K L 18

23 EXACT RATIOS - DOUBLE REDUCTION EXACT RATIOS Column Entry F0222 F0322 F0422 F0522 F0622 F0722 F0822 F0921 F1021 F1121 F

24 EXACT RATIOS - TRIPLE REDUCTION EXACT RATIOS Column Entry F0232 F0332 F0432 F0532 F0632 F0732 F0832 F0931 F1031 F1131 F EXACT RATIOS - QUAD REDUCTION Column Entry F0342 F0442 F0542 F0642 F0742 F0842 F0941 F C C C C C C C C C C C C C C C C

25 SELECTION TABLES GEARED OTORS 0.12 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 21

26 SELECTION TABLES GEARED OTORS 0.12 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load mount unit otor Sizes 0.12 kw 6 POLE _ NOTE Other output speeds are using 2 and 8 pole motors - Please contact our Engineers 22

27 SELECTION TABLES GEARED OTORS 0.12 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 23

28 SELECTION TABLES GEARED OTORS 0.18 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 24

29 SELECTION TABLES GEARED OTORS 0.18 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ 0.18 kw 6 POLE _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 25

30 SELECTION TABLES GEARED OTORS 0.18 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 26

31 SELECTION TABLES GEARED OTORS 0.25 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 27

32 SELECTION TABLES GEARED OTORS 0.25 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ 0.25 kw 6 POLE _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 28

33 SELECTION TABLES GEARED OTORS 0.25 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 29

34 SELECTION TABLES GEARED OTORS 0.37 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 30

35 SELECTION TABLES GEARED OTORS 0.37 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ 0.37 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 31

36 SELECTION TABLES GEARED OTORS kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 32

37 SELECTION TABLES GEARED OTORS kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 4 POLE _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 33

38 SELECTION TABLES GEARED OTORS kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ 0.55 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 34

39 SELECTION TABLES GEARED OTORS kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 35

40 SELECTION TABLES GEARED OTORS kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 4 POLE _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 36

41 SELECTION TABLES GEARED OTORS kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 4 POLE 0.75 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 37

42 SELECTION TABLES GEARED OTORS kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 38

43 SELECTION TABLES GEARED OTORS kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 39

44 SELECTION TABLES GEARED OTORS kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes 1.1 kw 6 POLE _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 40

45 SELECTION TABLES GEARED OTORS 1.1 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ 1.5 kw 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 41

46 SELECTION TABLES GEARED OTORS kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 42

47 SELECTION TABLES GEARED OTORS kw 4 POLE 1.5 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 43

48 SELECTION TABLES GEARED OTORS kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes 2.2 kw 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 44

49 SELECTION TABLES GEARED OTORS 2.2 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ 2.2 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 45

50 SELECTION TABLES GEARED OTORS kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 46

51 SELECTION TABLES GEARED OTORS kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes 3.0 kw 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 47

52 SELECTION TABLES GEARED OTORS kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ 3.0 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers _ 48

53 SELECTION TABLES GEARED OTORS 3.0 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ NOTE _ Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 49

54 SELECTION TABLES GEARED OTORS kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes _ NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 50

55 SELECTION TABLES GEARED OTORS kw ]4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit _ otor Sizes 4.0 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 51

56 SELECTION TABLES GEARED OTORS kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 5.5 kw 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 52

57 SELECTION TABLES GEARED OTORS 5.5 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 53

58 SELECTION TABLES GEARED OTORS 5.5 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 54

59 SELECTION TABLES GEARED OTORS 7.5 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 55

60 SELECTION TABLES GEARED OTORS 7.5 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 7.5 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 56

61 SELECTION TABLES GEARED OTORS 11 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 57

62 SELECTION TABLES GEARED OTORS kw 4 POLE 11 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 58

63 SELECTION TABLES GEARED OTORS 15 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 59

64 SELECTION TABLES GEARED OTORS 15 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 60

65 SELECTION TABLES GEARED OTORS 18.5 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 61

66 SELECTION TABLES GEARED OTORS 18.5 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 4 POLE 18.5 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 62

67 SELECTION TABLES GEARED OTORS 22 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 63

68 SELECTION TABLES GEARED OTORS 22 kw 6 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 30 kw 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 64

69 SELECTION TABLES GEARED OTORS 30 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 30 kw 6 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 65

70 SELECTION TABLES GEARED OTORS kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 66

71 SELECTION TABLES GEARED OTORS kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 6 POLE 45 kw 4 POLE 45 kw NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 67

72 SELECTION TABLES GEARED OTORS 55 kw N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 68

73 SELECTION TABLES GEARED OTORS 75 kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes 90 kw 4 POLE NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 69

74 SELECTION TABLES GEARED OTORS kw 4 POLE N2 R/IN i Ratio 2 Nm Torque Fm N Unit Designation Kg Service Factor Overhung Load Column Entry 1 Through 20 Weight of base mount unit otor Sizes NOTE Other output speeds are available using 2 and 8 pole motors - Please contact our Application Engineers 70

75 DIENSIONS OTORISED V1 a9 Hollow Bore UNIT SIZE a9 a10 C4 f4 h1 O7 P3 S4 V1 D m1 m2 m3 T U F0222 & F F0322 & F F0422 & F F0522 & F F0622 & F F0722 & F F0822 & F F0921 & F F1021 & F F1121 & F F1221 & F OTOR FRAE SIZE F0222 F0232 F0322 F0332 F0522 F0532 F0622 F0632 F0722 F0732 F0822 F0832 F0921 F0931 F1021 F1031 F1121 F1131 F1221 F1231 F0422 F0432 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K

76 DIENSIONS OTORISED QUAD *For motor dimensions refer to page 16 a10 S4 K1 K0* C4 V1 a9 g* g6* f4 h1 U m1 m2 m3 P3 O7 OD V3 V2 T Shaft Bore Setscrew - see output option page for details Hollow Bore UNIT SIZE a9 a10 C4 f4 h1 O7 P3 S4 V1 V2 V3 D m1 m2 m3 T U F F F F F F F F OTOR FRAE SIZE F0342 F0442 F0542 F0642 F0742 F0842 F0941 F1041 K1 K1 K1 K1 K1 K1 K1 K

o C to + 50 o C OTORISED BACKSTOP ODULE K 1 Øg6 Warning IEC B5 FLANGE otor Frame Size Lift off ( n min) (rev/min) Rated Locking Torque ( T max ) (at motor) (Nm) øg6 K1 100 670 170 250 70 112 670 170

77 o C to + 50 o C OTORISED BACKSTOP ODULE K 1 Øg6 Warning IEC B5 FLANGE otor Frame Size Lift off ( n min) (rev/min) Rated Locking Torque ( T max ) (at motor) (Nm) øg6 K NEA C FLANGE otor Frame Size Lift off ( n min) (rev/min) Rated Locking Torque ( T max ) (at motor) (Nm) øg6 182TC / 184TC TC / 215TC TC / 256TC TC / 286TC TC / 326TC K1 Locked - Clockwise CW 73

78 DIENSIONS OTORISED OPTIONS Kibo Bushes Torque Bush B5 (D) Flange ounting B14 (C) Flange ounting 74

79 NOTES 75

80 REDUCER REDUCER 76

81 aximum permissible overhung loads OVERHUNG & AXIAL LOADS (NEWTONS) ON SHAFTS Overhung load (Newtons) N x R Overhung member K (factor) Distance midway along the shaft extension Fr B Size of unit F02 NO of Reductions Dimension A (mm) Dimension B (mm) F Fra F F Inputshaft Overhung Loads, Frb (Kn) 1450 rpm Two, Three and Five Stage Units F02 F03 F04 F05 F06 F07 F08 F09 F10 F11 F12 2 Stage 3 Stage 4 Stage Axial Thrust Capacities (Newtons) No check or calculation is required for axial loads (F F06 F07 F08 F09 F10 F11 F

82 Thermal Ratings kw THERAL POWER RATINGS o Thermal Power (kw) i Ratio Up to N1 F0222 F0322 F0422 F0522 F0622 F0722 F0822 F0921 F1021 F1121 F Note: 78

83 DOUBLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0222 F0322 F0422 F0522 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

84 DOUBLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0222 F0322 F0422 F0522 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

85 DOUBLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0622 F0722 F0822 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

86 DOUBLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0622 F0722 F0822 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

87 DOUBLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0921 F1021 F1121 F1221 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

88 DOUBLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0921 F1021 F1121 F1221 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

89 DOUBLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0921 F1021 F1121 F1221 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

90 DOUBLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0232 F0332 F0432 F0532 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

91 TRIPLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0632 F0732 F0832 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

92 TRIPLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power page Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0931 F1031 F1131 F1231 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

93 TRIPLE REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0931 F1031 F1131 F1231 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

94 QUAD REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0342 F0442 F0542 F0642 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

95 QUAD REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0342 F0442 F0542 F0642 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra C C C C C C C C C C

96 QUAD REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0342 F0442 F0542 F0642 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra C C C C C C

97 QUAD REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0742 F0842 F0941 F1041 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra

98 QUAD REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0742 F0842 F0941 F1041 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra C C C C C C C C C C

99 QUAD REDUCTION RATINGS Note: Input Power, Pm may exceed thermal limit, Check thermal power Pm - Input Power (kw) 2 - Torque (Nm) i - Exact Ratio (:1) N2 - (rpm) fra - Overhung Load (kn) Column Input N1 F0742 F0842 F0941 F1041 N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra N2 i 2 Pm fra C C C C C C

100 DIENSIONS REDUCER K1 C4 a10 L1 S4 L14 L13 d1 V1 a9 h1 Tapped hole w1 P3 f4 O7 m1 m2 u1 U m3 Setscrew - see output option page for details d1 Ø D t1 Input Shaft T Shaft Bore 96

101 DIENSIONS REDUCER QUAD a1 0 K1 L1 S4 L1 4 L1 3 C4 V1 a9 d1 h1 Tapped ped hole w1 P3 f4 O7 d1 u1 OD V3 V2 U m1 m2 m3 Setscrew - see Setscrew output option - se output page for option details pa ge for details t1 Input Shaft Input Sh aft T Shaft Bore Ou tput Shaft Bore UNIT SIZE a9 a10 C4 f4 h1 K1 O7 P3 S4 V1 V2 V3 F F F F F F F F UNIT SIZE Input Shaft Hollow Bore d1 L1 L13 L14 t1 u1 w1 D m1 m2 m3 T U F0342 F0442 F0542 F0642 F0742 F0842 F0941 F k6 16 k6 16 k6 16 k6 16 k6 19 k6 19 k6 24 k

102 FAN COOLED UNITS Column 10 Entry For reducer fan kit modules enter S in column 10 Dimensions of Fan Cooled Units L15 B8 Ø L16 L13 UNIT SIZE ØB8 L13 L15 L16 F F F F

103 o C to + 50 o C REDUCER BACKSTOP ODULE Column 10 Entry Lift Off ( n min) Rated Locking Unit Size Torque ( T max ) (at (at inputshaft) inputshaft) (Nm) (rev/min) F F F F F F CW Locked - Clockwise 99

104 KIBO BUSHES Advantages with Kibo taper bushes - Simple design ounting Dismounting NOTE: L1 L L2 u Protective Cover R Chamfer 5x45 t Lk k Lk C O D4 O d O d -03 O d O d O D k1 e O d5 O dk Og4 L4 L3 K Tapped ole (DIN w7 Bolt 100

105 KIBO BUSHES Customers Shaft Unit Size K R u L L1 L2 L3 L4 t min max Din(332) (max) (N9) x F x x F05 F06 F07 F08 F09 F10 F11 F x x x x x x x x x x x x Unit Size F04 F05 F06 F07 F08 F09 F10 F11 F12 KIBO Bush Kit Customers Shaft End Plate Cover Column 11 entry 35 C38214-S C38214-S C38214-S C38364-S2 1 m1 Ak Lk C Fixing Bolt e k1 Tightening Torque Nm w C38364-S C38364-S C38364-S C38364-S C38364-S C38464-S C38464-S C38464-S C38614-S C38614-S C38614-S C38684-S C38684-S C38684-S B93404-S B93404-S B93404-S B91884-S B91884-S B91884-S C38834-S C38834-S C38834-S

106 TORQUE BUSH RUBBER BUFFERS FOR TORQUE AR C B F G a9 E UNIT SIZE B C a9 E F G F F F F F F F F F F F

107 DIENSIONS D (B5) FLANGE Column 9 Entry Column 11 Entry C with etric Shaft o K1 C4 i2 c1 f1 s1 a1 1 P3 v Ø Ø L11 d u Ø e1 Ø L12 L F11 & F12 Shaft t m O7 Please Note: The appearance of the F11 & F12 UNIT SIZE a1 b1 c1 C4 e1 f1 K1 m o O7 P3 s1 F j6 F j6 F j6 F j6 F j6 F j6 F h6 F h6 F h6 F h6 F h See otorised or Reducer Dimension Pages Shaft d i2 L L11 L12 t u v x x x x x x 14 4 x 14 4 x 14 4 x 18 8 x 18 8 x 18 8 x 18 8 x x x x x x x x x50 103

108 Column 9 Entry Column 11 Entry C with etric Shaft DIENSIONS C (B14) FLANGE o K1 C4 L s1 L11 L12 a1 1 u P3 Ø i2 f1 d t Shaft F02 to F07 ale Spigot F08 F09 F10 Female Recess F11 and F12 ale Spigot Øv Ø e1 m O7 F11 & F12 Please Note: The appearance of the F11 & F12 UNIT SIZE a1 b1 C4 e1 F F F j6 85 j6 85 j6 F j6 F j6 F j6 F F F F J7 F J7 f1 F1 ale Female K1 m o O7 P3 s1 Shaft d i2 L L11 L12 t u v See otorised or Reducer Dimension Pages x12 4-8x12 4-8x x x x x x x x x x x x x x x x x

109 ASSEBLY ONTO SHAFT - CUSTOERS SHAFT DETAIL DIENSIONS STANDARD BORE ASSEBLY T I5 m R d d d da u u1 I3 I4 Spacer Tue for use with customer shaft without shoulder (not supplied I2 l I1 Size d da I I1 I2 I3 I4 I5 m N R T u u1 F Nm 22 deep F Nm 22 deep F Nm 30 deep F05 16 x Nm 38 deep F06 16 x Nm 38 deep F07 16 x Nm 38 deep F Nm 42 deep F Nm 42 deep F Nm 42 deep F11 24 x Nm 50 deep F12 24 x Nm 50 deep 105

110 DIENSIONS STANDARD BORE DISASSEBLY DISASSEBLY ETHOD FRO SHAFT c5 c4 D * d3 c7 * Parts Supplied Customer d3 1 x 45 * m1 d2 t d4 * c6 I2 m u m1 Size c4 c5 c6 c7 D d2 d3 d4 I2 m m1 t u F F x F x F x F x F x 3 14 F F F F F

111 SHIPPING SPECIFICATION REDUCTIONS F0222 F0232 F0322 F0332 F0342 F0422 F0432 F0442 F0522 F0532 F0542 REDUCER VERSION OTORISED S S 200L 180L L S L 90L 90S 80B

112 SHIPPING SPECIFICATION REDUCTIONS F0622 F0632 F0642 F0722 F0732 F0742 F0822 F0832 F0842 F0921 F0931 F0941 REDUCER VERSION OTORISED S S 200L 180L L S L 90L 90S 80B

113 SHIPPING SPECIFICATION REDUCTIONS F1021 F1031 F1041 F1121 F1131 F1221 F1231 REDUCER VERSION OTORISED S S 200L 180L L S L 90L 90S 80B

114 Product Safety Information IPORTANT PRODUCT SAFETY General must proper precautions must Potential Hazards - these are not o 110

115 NOTES 111

116 CONTACT US AUSTRALIA DENARK SWEDEN & NORWAY UNITED KINGDO Radicon Transmission (Australia) PTY Ltd Australia Tel: EUROPE Benzler TBA BV Jachthavenweg 2 NL-5928 NT Venlo Germany Tel: Fax: Italy Tel: Netherlands & the rest of Europe Tel: Fax: Benzler Transmission A/S Dalager 1 DK-2605 Brøndby, Denmark Tel: Fax: FINLAND Oy Benzler AB Vanha Talvitie 3C FI Helsingfors, Finland Tel: Fax: INDIA Elecon. Engineering Company Ltd. Anand Sojitra Road Vallabh Vidyanagar Gujarat India AB Benzlers Porfyrgatan Helsingborg Sweden Tel: Fax: THAILAND Radicon Transmission (Thailand) Ltd 700/43 oo 6 Amata Nakorn Industrial Estate Tumbol Klongtumru uang, Chonburi Thailand Tel: Fax: Radicon Transmission UK Ltd Unit J3 Lowfields Business Park, Lowfields Way, Elland West Yorkshire, HX5 9DA Tel: Fax: USA Radicon Drive Systems, Inc Lunt Avenue Elk Grove Village Chicago Illinois USA Tel: Fax: Tel: Fax:

117 Benzlers Denmark Finland Germany Italy Sweden The Netherlands Radicon Thailand United Kingdom USA

Series C Helical Worm

Series C Helical Worm Technical p to - 45 Kw / 10,000 Nm Geared otors CC-2.01GB0914 PRODCTS IN THE RANGE Series A Worm Gear units and geared motors in single & double reduction types Series BD Screwjack