HOOP. x 300mm TUNNELS

Transcription

1 Standard Jmps AGILITY EQUIPMENT CERTIFICATE OF FITNESS HURDLES Consist of a spported bar hich is displaceable pon impact. of bar from grond (maimm)note : This is the top of the bar NOT the lg. (Micro, Mini 380mm, Midi 570mm, Mai 650mm). Additional displaceable bars may be added nderneath. The prights of a hrdle mst be at least 900mm high Upright Jmp Bar Diameter Bars Striped Lgs 900 min 100 min 30 mm min Micro Mini Midi Mai 380mm 570mm 650mm Brsh Jmp As for the hrdle. In addition, the area belo the bar mst comprise a material hich completely blocks vision from one side to the other. Hoop Pipe Tnnel HOOP The hoop mst be designed so that it is able to be displaced. Apertre diameter 500mm, base of apertre from grond (Maimm) Micro 00mm, Mini, Midi 500mm, Mai. The thickness of the hoop is to be 65mm - 100mm. The hoop mst have bands of contrasting color arond its circmference. Apertre mm Micro Displaceable 7 Contrasting Bands 00mm Mini TUNNELS Midi 5 500mm Mai Diameter minimm throghot the length of the tnnel; 3m minimm. Circlar, of rigid or bendable constrction. All forms of fiation throghot the length of the tnnel mst be safe, hich incldes filling apertres and padding tnnel cradles. Diameter Fiations 600 mm min 3m min Filled, Padded Collapsible Tnnel Diameter - 760mm, 3-4m. Circlar, of non-rigid material constrction. All forms of fiation throghot the length of the tnnel mst be safe, hich incldes filling apertres and padding tnnel cradles. The tnnel eit mst, even hen pegged, measre at least diameter. Diameter Fiations Weaves 600 mm min 3-4 m WEAVES Filled, Padded A series of poles in a straight line, distance beteen one pole and the net of 600 mm (measred from centre to centre). Minimm height of poles 900mm. Note For eaving pole sets manfactred prior to 1 Febrary 009 the distance beteen poles may be measred as the distance beteen the otside edge of one pole and the inside edge of the net pole. The eave base spports mst be placed so they do not lie here the dog old place its feet Centre to Centre spacing Pole Base Spports 900mm min

2 LONG JUMP Long Jmp :- Micro -, Mini - 800mm, Midi 800mm -1.1m, Mai 1.1m - 1.6m. from grond (ma) 1st element 100mm, nd element 150mm, 3rd element 00mm, 4th element 50mm, 5th element. 1.m minimm. Nmber of elements:- Micro loest, Mini loest 3, Midi loest 4, Mai all 5. Corner poles recommended. All Elements to be colored similarly for all dog heights. The elements mst be designed so that they are displaceable. 1 st 100mm nd 150mm 3rd 00mm 4th 50mm 5th 1. min Color Similar for all heights WINGS Wings Wings are permitted to be sed on any hrdles, brsh fences, asymmetrical spread jmps and mltiple bar ascending spread jmps. (W1) maimm, (H1) 900mm minimm, idth (W) 150mm minimm, height (H) minimm. Eceptions to this may be approved by application to the agility committee. H1 900 mm min W 150mm min H 600 mm min W1 ma SPREAD JUMP Spread jmp Note: spreads jmps may be made from combined std jmps, bt specially made spread jmps mst meet these specifications 50mm Micro 00mm Asymmetrical Spread Jmp Consists of front and rear spported bars hich are displaceable pon impact. of bar from grond (maimm): Micro 50mm front bar, rear bar ith 00mm beteen, Mini front bar, 380mm rear bar ith beteen, Midi 380mm front bar, 570mm rear bar ith 450mm beteen, Mai 570mm front bar, 650mm rear bar ith beteen 5 (,,). The distance beteen the front and rear bar is taken as a horizontal measrement, not ascending the spread. Where smaller dimensions are sed the ratio beteen the height of the front bar and the height of the rear bar mst be maintained as close as is practical to that prodced above. Additional displacement bars may be added nderneath the front and rear bars, bt not solely nder the rear bar Mini 380mm 380mm 5 a 7 Midi 450mm 570mm a 7 Mai 650mm

3 Dog Walk CONTACTS 1m minimm, 1.m maimm; ; - length of ramps,.4m minimm, 3m maimm, - length of middle section 3.65m minimm, 4.3m maimm. The ramps are to have non-slip srface and slats at intervals and to be firmly fied to top of planks. There mst be no slats ithin 150mm at the top of the contact area. Both ramps are to be marked ith a line 1m from grond, belo this line to be knon as the "contact area". Contacts Middle 1 1.m m 1m From grond Clearly marked Ramps.4-3 m Non-Slip Secrely Fied Slats Spaced & ell fied 150 mm clear of contact A Frame of each ramp.75m minimm,.9m maimm; 900mm minimm. The angle made beteen the grond and the incline of the ramp is to be 39 degrees. To ramps hinged at ape, ith no gap beteen the ramps, hich is not otherise completely filled by the hinging mechanism or a firmly affied insert. Srface of ramps to be non-slip and slatted at intervals not eceeding 380mm and marked ith a line 1070mm from the grond p the angle of the ramp. The area belo the line to be knon as the "contact area".the base of the ramp mst commence at grond srface. There mst be no slats ithin 150mm of the top of the contact area. See appendi for a gide to height verss ramp length to achieve the 39 degree angle reqired m 900 mm min Ramp Incline 39 deg No ape Gap Non-slip Slat Interval 380 mm ma Slats not ithin 150mm of top Contact Area 1070 mm Crossover 1-1.m; Table mm sqared; Ramps.4-3m long, ide, non-slip srface, contact points 1m from grond. The srface of the ramps are to be slatted at intervals not eceeding 380mm. There mst be no slats ithin 150mm of the top of the contact area. Ramps Table 1 1. mm mm sq.4-3 m 300 mm Non-Slip Slat Interval 380 ma Slats not ithin 150mm of top SeeSa ; 3.65m minimm, 4.3m maimm; of central bracket from grond minimm, 700mm maimm. A plank ith an non-slip srface (ithot slats) is to be firmly monted on a central bracket and marked ith a line 1m from the grond, belo this to be knon as the "contact area". The time for the end of the see-sa to toch the grond mst be not less than 1 second or more than 3 seconds hen a 1.5kg eight is placed from the end of the ramp hile it is in the p position. Bracket Non Slip m mm Contact area Descent 1 m time 1-3 secs

4 Appendi 1: Belo are a fe eamples of tnnels ho does yors compare?

5 A Frame dimensions See table belo for a gide to height verss ramp length to achieve the 39 degree angle reqired. Ramp length Aframe height Grond length