CRUSHING & SCREENING SOLUTIONS

Transcription

1 CRUSHING & SCREENING SOLUTIONS

2 A DYNAMIC GLOBAL BUSINESS A FOUNDATION OF STRENGTH Terex Finlay was fonded over 59 years ago and is a recognized global pioneer in the manfactre of mobile crshing and screening eqipment for the qarrying, mining, constrction, demolition and recycling indstries. TEREX FINLAY. OUR HISTORY - A pedigree to be prod of: 1958: John Finlay manfactres his first block making machine. 1961: First Finlay mobile screening nit introdced to UK and Irish markets. 1976: Screening prodction relocated to a prpose bilt manfactring facility in Omagh, Northern Ireland. 2005: Begin manfactring tracked mobile crshers. Lanch J-1175 jaw crsher and I-1312 impact crsher. 2006: Introdction of I-110 impact crsher. Second generation 883 heavy dty scalper lanched. 2007: Introdction of J-1160 jaw crsher, I-110RS impact crsher with detachable screen and recirclation system, Introdction of C-1540 cone crsher. 2008: Introdction of the 984 horizontal screen, the C-1540RS cone crsher with detachable screen and recirclation system and a second generation J-1175 jaw crsher. 2009: Introdction of J-1480 jaw crsher and I-130 impact crsher. 2010: Introdction of C-1550 cone crsher and lanch of second generation 693+ and 694+ inclined screens. 2011: Introdction of 863 heavy dty scalper. 2012: Introdction of 684 inclined screen, J-1170 jaw crsher and I-100 impact crsher. 2013: Introdction of 694+ diesel/electric inclined screen, 883 Spaleck heavy dty scalper, 893 heavy dty scalper and 1-100RS impact crsher. 2014: Introdction of Dal Power Train:- C-1540 dal power cone crsher, J-1175 dal power jaw crsher, 694+ dal power inclined screen. Also the introdction of the C-1550 cone crsher, J-1170AS jaw crsher, J-960 jaw crsher, J-1175 dal power jaw crsher, Spaleck inclined screen, 883+ and 883+ Spaleck heavy dty screener 2015: Introdction of 873 heavy dty scalper, 873 Spaleck heavy dty scalper, J-960 jaw crsher, C-1545 cone crsher, C-1545P cone crsher, C-1554 cone crsher 2016: Introdction of T-link Telematics system across or fll range of Crshers, I-140 Impact Crsher, 674 inclined screen, 873 heavy dty screen, Dal Power configration for or 883+ and 873 heavy screeners 2017: I-140RS impact crsher, V-2050 vertical shaft impact crsher and many more machine lanches planned. Or parent company, Terex Corporation, is a global manfactrer of a diverse range of eqipment for the constrction, infrastrctre, extraction, shipping, transportation, pblic service and indstrial segments. Terex Corporation generates annal revenes of more than $7.0 billion. 2 3

3 Jaw Crshers Impact Crshers I-140RS Cone Crshers 4 5

4 J-960 J-1160 The next generation Terex Finlay J-960 is a compact and aggressive mobile jaw crsher that has been designed with the cstomer and operator in mind. The machine has been redesigned with improved all rond preventative maintenance and serviceability access points. The heartbeat of the machine is a robst direct driven Terex 900 x 600mm (35 x 24 ) single toggle jaw chamber which provides high capacity with large redction ratios. Its compact size, excellent mobility and high crshing capacity even at tight settings in recycling and hard rock operations make the J-960 ideal for small to medim sized operators. 12.4m (40 8 ) 2.4m (7 10 ) 3.2m (10 6 ) The Terex Finlay J-1160 is a compact and aggressive tracked mobile primary jaw crsher. Incorporating the Terex Jaqes JW40 jaw crsher a heavy dty VGF feeder and an integrated prescreen system the Terex Finlay J-1160 gives optimm prodction in qarrying, mining, demolition and recycling applications. Its compact size, qick set p times, ease of transport and ser friendly operational featres make the Finlay J-1160 ideal for all sized operators. 15.7m (51 6 ) 2.6m (8 6 ) 3.4m (11 2 ) 12.4m (40 8 ) 3.8m (12 6 ) 15.5m (50 10 ) 4.6m (15 1 ) Featres: A nmber of innovative design featres have be in bilt improving material flow throgh increased clearances, improved service access points and all rond maintenance serviceability. Direct drive jaw chamber fitted with an nblock featre that maximizes ptime. Jaw chamber has fll hydralic wedge adjst system for qick and easy on-site adjstment of the jaw CSS minimising downtime. The redesigned main conveyor with 440mm (1 5 ) nder jaw clearance minimises restrictions when operating in recycling applications. 3.2m (10 6 ) Machine Weight: 28,000kg (61,730lbs) (with by-pass conveyor and single pole magnet options) Featres: The robst high performance hydrostatic driven single toggle jaw chamber provides high capacity with large redction ratio s. Atomatic variable speed VGF ensres continos choke feeding of the crshing chamber for optimal prodctivity. High powered hydrostatic drive ensres precise chamber controls and reverse fnctionality for clearing blockages and assisting in demolition and recycling applications. Flly hydralic adjstable closed side setting minimises downtime and offers qick adjstment. 3.9m (12 9 ) Machine Weight: *35,350kg (77,930lbs) * with twin pole magnet, dirt conveyor and hopper extensions 6 7

5 J-1170 J-1170AS J-1170AS The Terex Finlay J-1170 is a compact and aggressive tracked primary jaw crsher. The heartbeat of the machine is a robst hydrostatically driven Terex jaw chamber which provides high capacity with large redction ratios. The jaw chamber configration can be set p specifically for qarrying applications or processing constrction demolition debris sing the hydralic release chamber option. The J-1170 featres a heavy dty variable speed VGF and integrated prescreen giving excellent prodction throghpt in qarrying, mining, demolition and recycling applications. Notable options inclde a variable speed pan feeder along with an independent prescreen system. The J-1170 s 48.9 tonne / 107,806lbs transport weight and compact dimensions mean lower transport costs between and within crshing sites. Featres: The robst high performance hydrostatically driven single toggle jaw chamber provides high capacity with large redction ratios. Atomatic variable speed VGF ensres continos choke feeding of the crshing chamber for optimal prodctivity. High powered hydrostatic drive ensres precise chamber control and reverse fnctionality for clearing blockages and assisting in demolition and recycling applications m (47 5 ) 16.10m (52 10 ) 2.9m (9 6 ) 3.4m (11 2 ) 6.04m (19 1 ) 4m (13 2 ) The J-1170AS jaw crsher provides the flexibility of a crshing and screening plant on one machine. This aggressive machine featres a detachable on-board sizing screen. The heartbeat of the machine is a robst hydrostatically driven Terex jaw chamber which provides high capacity with large redction ratios. The jaw chamber configration can be set p specifically for qarrying applications or processing constrction demolition debris sing the hydralic release chamber option. The J-1170AS featres a heavy dty variable speed VGF and integrated prescreen giving excellent prodction throghpt in qarrying, mining, demolition and recycling applications. Featres: On board After Screen delivering a single sized prodct removing the need for a second machine. After Screen system can be removed qickly allowing the operator to se as a standard nit, giving the operator versatility depending on the application. Atomatic variable speed VGF ensres continos choke feeding of the crshing chamber for optimal prodctivity. 16m (52 8 ) 2.95m (9 8 ) 3.4m (11 ) 17.16m (56 3 ) 6.04m (19 10 ) 4.01m (13 2 ) 8 Hydralically assisted closed side setting adjstment minimises downtime and offers qick adjstment. Its compact size, qick set p times, ease of transport and ser friendly operational featres make the J-1170 ideal for all sized operators. Machine weight: 48,900kg (107,806lbs) (with HA chamber, VGF, single pole magnet, by-pass conveyor, and standard main conveyor) other options available High powered hydrostatic drive ensres precise chamber control and reverse fnctionality for clearing blockages and assisting in demolition and recycling applications. Hydralic assisted closed side setting adjstment minimises downtime and offers qick adjstment. Machine weight: 54,600kg (120,372lbs) (with HA chamber, VGF, single pole magnet, by-pass conveyor, Afterscreen system) other options available 9

6 J-1170 DIRECT DRIVE The Terex Finlay J-1170 is a compact and aggressive tracked primary jaw crsher. The heartbeat of the machine is a robst direct driven Terex jaw chamber which provides high capacity with large redction ratios. The jaw chamber configration can be set p specifically for qarrying applications or processing constrction demolition debris sing the hydralic release chamber option m (54 2 ) 2.9m (9 6 ) The J-1170 featres a heavy dty variable speed VGF and integrated prescreen giving excellent prodction throghpt in qarrying, mining, demolition and recycling applications. Notable options inclde a variable speed pan feeder along with an independent prescreen system. The J-1170 s 48 tonne / 105,822lbs transport weight and compact dimensions mean lower transport costs between and within crshing sites. 3.37m (11 1 ) J-1170 DIRECT DRIVE Featres: Robst proven Terex 1100mm x 700mm jaw crsher for high capacity and large redction ratios in qarrying, mining, demolition and recycling applications. Optional hydralic release for demolition and recycling applications. Compact dimensions and qick set-p make the J-1170 the optimm soltion for contract crshing as well as demanding in-pit applications. Direct drive jaw chamber fitted with an nblock featre that maximizes ptime m (52 8 ) 4.13m (13 7 ) 4.36m (14 4 ) Hydralically assisted closed side setting adjstment minimizes downtime and offers qick adjstment. Machine weight: 48,000kg(105,822lbs) (HA, VGF, single pole magnet, bypass conveyor, standard rigid conveyor & nblock featre) 10 11

7 J-1175 J-1175 J-1175 The Terex Finlay J-1175 is a high performance tracked mobile jaw crsher. Incorporating the Terex Jaqes JW42 jaw crsher and a heavy dty VGF feeder the Finlay J-1175 gives optimm prodction in a range of applications. Its compact size, qick set p times, ease of transport and simple maintenance make the Terex Finlay J-1175 ideal for qarrying, mining, demolition and recycling applications. 14.5m (47 8 ) 15.7m (51 8 ) 6.2m (20 4 ) 2.9m (9 6 ) 3.5m (11 6 ) The dal powered Terex Finlay J-1175 jaw crsher offers operators the flexibility to power the plant either by mains electric connection or the onboard genset powerpack configration. Either power option presents operators with significant power, servicing and maintenance cost savings in direct comparison to a diesel/ hydralic powered plant. The plant incorporates the robst Terex JW42 high performance electrically driven single toggle jaw chamber and a heavy dty VGF feeder to give optimm prodction in qarrying, mining, demolition and recycling applications. Additional benefits inclde, rapid set p time, ease of maintenance, high redction ratio, high otpt capacity and advanced electronic control system. 14.5m (47 8 ) 15.7m (51 8 ) 2.9m (9 6 ) 6.2m (20 4 ) 3.5m (11 6 ) Featres: The robst high performance hydrostatically driven single toggle jaw chamber provides high capacity with large redction ratio s. 3.95m (12 1 ) Featres: The plant s electrically driven power systems provide significant cost advantages and efficiencies. 3.95m (12 1 ) Atomatic variable speed VGF ensres continos choke feeding of the crshing chamber for optimal prodctivity. High powered hydrostatic drive ensres precise chamber controls and reverse fnctionality for clearing blockages and assisting in demolition and recycling applications. Flly hydralic closed side setting minimises downtime and offers qick adjstment. Machine Weight: 51,300kg (113,096lbs) (VGF,withot by-pass conveyor and magnet options) 53,500kg (117,946lbs) (VGF, with by-pass conveyor and magnet options) Sperior performance in dsty applications and in high altitde environments. Atomatic variable speed VGF ensres continos choke feeding of the crshing chamber for optimal prodctivity. High powered electric drive ensres precise chamber controls and reverse fnctionality for clearing blockages and assisting in demolition and recycling applications. Machine Weight: 54,300kg (119,711lbs) (VGF, withot by-pass conveyor and magnet options) 56,500kg (124,561lbs) (VGF, with by-pass conveyor and magnet options) 12 13

8 J-1480 The Terex Finlay J-1480 incorporates the Terex Jaqes JW55 single toggle jaw crsher which boasts a throghpt capacity p to 750mtph depending on application and material. The machine is available with the optional direct drive which offers improved fel efficiency and greater power tilisation or the standard hydrostatic drive which offers reversible operation for clearing blockages and for se in demolition applications. The large 10m³ hopper has hydralically folding sides and hydralic wedge clamp system providing faster machine set p time. The machine featres a vibrating pan feeder and an aggressive independently driven pre-screen which provides optimm separation of dirt, fines and difficlt materials. 18m (59 4 ) 3.38m (11 1 ) 3.8m (12 8 ) 20.7m (67 11 ) 6.7m (22 0 ) Featres: 4.6m (15 3 ) Terex Jaqes Jaw with flly hydralic adjstable closed side setting. Hydrostatic & Direct drive systems with advanced electronic control system. 10m³ (13yd³) hopper capacity. Optional hopper side extensions are available. Independent VGF feeder and Pre-Screen Deck J-1160 Selectable discharge to by-pass conveyor or main conveyor. Machine Weight: 75,200kg (165,787lbs) (withot by-pass conveyor and twin pole magnet options) 78,200kg (172,401lbs) (with by-pass conveyor and twin pole magnet options) 14 15

9 I-100 I-100RS The Terex Finlay I-100 tracked impact crsher has been specifically designed for qarrying, recycling and demolition applications. The I-100 featres a Ø860mm x 860mm (Ø34 x 34 ) direct drive impact chamber with variable rotor speed. The advanced electronic control system monitors, controls and reglates the speed of VGF with, integrated prescreen, to maintain a consistent feed of material into the impact chamber while maintaining optimal crshing capacity. The machine provides operators high material redction ratios and prodces a consistent prodct grading m (43 11 ) 2.5m (8 2 ) 3.2m (10 6 ) The Terex Finlay I-100RS direct drive ø860mm x 860mm (Ø34 x 34 ) horizontal impact crsher with variable speed gives operators nprecedented levels of fel efficiency and prodction in both recycling and qarrying applications. The machine featres a 2.44m x 1.2m (8 x 4 ) single deck screen for sizing and recirclating oversize material back to the crshing chamber and the sizing screen can be qickly detached for applications that do not reqire resizing or recirclation of materials for frther processing. The I-100RS featres hydralic folding of all conveyors providing rapid set-p times and easy point to point moves when operating on mltiple sites. 15.8m (51 9 ) 14.8m (48 7 ) 3m (9 10 ) 5.5m (18 ) 3.2m (10 6 ) Featres: Hydralic apron setting assist provides convenient and efficient adjstment of the aprons. Hydralic overload protection provides instant protection for ncrshable material. Heavy dty vibrating feeder (VGF) with integrated pre-screen helps by-pass dirty fines 13.4m (44 ) 4m (13 1 ) 3.6m (11 10 ) Featres: Direct drive Ø860mm x 860mm (Ø34 x 34 ) crsher chamber with niqe belt tensioner system allowing for rapid adjstment. Hydralic apron setting assist provides convenient and efficient adjstment of the aprons and hydralic overload protection in event that an n-crshable object enters chamber. Detachable 2.44m x 1.2m (8 x 4 ) single deck screen retrns oversize material back to the crsher via the on-board recirclating system. 3.86m (12 8 ) Direct drive crsher chamber with independent belt tensioner allowing for rapid adjstment. Qick and easy detachable screen, fines and transfer conveyor for open circit crshing. Crsher chamber is spplied with a 4 bar rotor and two apron design for large redction ratios. Machine weight: 27,000kg (59,525lbs) (With by-pass conveyor & twin pole magnet) Optional ndercrsher pan feeder provides complete belt protection in recycling applications. Machine weight: 33,950kg (74,847lbs) (With by-pass conveyor & twin pole magnet) 16 17

10 I-110 I-120RS The Terex Finlay I-110 tracked impact crsher has been specifically designed for qarrying, mining, recycling and demolition applications. The Terex Finlay I-110 featres a Ø1000mm x 1000mm (Ø40 x 40 ) hydrostatic drive impact chamber with variable rotor speed. The advanced electronic control system monitors and controls the speed of the rotor and reglates the VGF with integrated pre-screen to maintain a consistent feed of material into the impact chamber while maintaining optimal crshing capacity. The machine provides operators high material redction ratios and prodces a consistent prodct shape. 14.1m (46 3 ) 2.6m (8 6 ) 3.6m (11 10 ) The Terex Finlay I-120RS shapes the ftre throgh innovation. This new generation impact crsher with redefined style and advanced technological design gives improved material flow and prodction capabilities in qarrying, mining, demolition and recycling applications. Incorporating the Terex CR038 impact chamber with direct drive and advanced electronic control system the machine provides operators with high material redction ratios and prodces a consistent prodct shape. A key component of the machine is the on-board innovative qick detach 3.66m x 1.53m (12 x 5 ) two deck screen. For applications not reqiring recirclation of materials for frther processing or stockpiling the complete screening and recirclating system can be qickly detached from the machine. 18m (59 ) 3.1m (10 2 ) 3.4m (11 1 ) 14.3m (46 11 ) 5.9m (19 4 ) The high prodctivity, ease of maintenance and operation makes the machine an ideal soltion for large scale prodcers and contract crshing operators. 17.8m (58 6 ) 5.8m (19 1 ) Featres: Flly hydralic assisted apron setting featres makes adjstment of the aprons convenient and efficient. 3,9m (12 9 ½ ) Featres: The ease of material flow throgh the machine has greatly improved with each component of the machine increasing in width as the material moves throgh the machine. Flly hydralic apron setting assist provides convenient and efficient adjstment of the aprons 4.7m (15 6 ) Heavy dty vibrating feeder (VGF) with integral pre-screen removes dirt fines and sizes bypass material for reprocessing. Heavy dty vibrating feeder (VGF) with integrated prescreen removes dirt fines and sizes bypass material for reprocessing. 10.9m (35 10 ) *Stockpile Mode Under crsher vibratory plate feeder with wear resistant liners aids material discharge flow and redces nder crsher blockages. Crsher chamber is spplied with a 4 bar rotor as standard with a 3 bar rotor available as an option. Machine Weight: 34,000kg (74,957lbs) (withot by-pass conveyor and magnet options) Qick on-board detachable recirclating system inclding large 3.66m x 1.53m (12 x 5 ) two deck screen. Recirclating conveyor can be rotated from closed loop configration or tilized for stockpiling making an additional oversized prodct. Machine weight: 48,150kg (106,153lbs*) (*VGF, Hopper Extensions & Heavy Dty Magnet) 18 19

11 I-140 The Terex Finlay I-140 shapes the ftre throgh innovation. This new generation impact crsher with redefined style and advanced technological design gives improved material flow and prodction capabilities in qarrying, mining, demolition and recycling applications. Incorporating the a Terex CR032 impact chamber with direct drive and advanced electronic control system the machine provides operators with high material redction ratios and prodces a consistent prodct shape. The high prodctivity, ease of maintenance and operation makes the machine an ideal soltion for large scale prodcers and contact crshing operators m (60 47 ) 3m (9 1 ) 3.8m (12 8 ) 17.8m (58 5 ) 7.36m (24 2 ) Featres: The ease of material flow throgh the machine has greatly improved. With each component increasing in width as the material moves throgh the machine. Flly hydralic assisted apron setting featres makes adjstment of the aprons convenient and efficient. Heavy dty vibrating feeder (VGF) with integral pre-screen removes dirt fines and sizes bypass material for reprocessing. Optional nder crsher vibratory plate feeder with wear resistant liners aids material discharge flow. 4.6m (15 ) Machine weight: 48,720Kg (107,410 lbs) withot options 53,120Kg (117,109 lbs) with optional Pre Screen I-140

12 I-140RS V-2050 The Terex Finlay I-140RS shapes the ftre throgh innovation. This new generation impact crsher with redefined style and advanced technological design gives improved material flow and prodction capabilities in qarrying, mining, demolition and recycling applications. Incorporating the Terex CR032 impact chamber with direct drive and advanced electronic control system the machine provides operators with high material redction ratios and prodces a consistent prodct shape. A key component of the machine is the on-board innovative qick detach 4.8m x 1.5m (16 x 5 ) single deck screen. For applications not reqiring recirclation of materials for frther processing or stockpiling the complete screening and recirclating system can be qickly detached from the machine. 21.7m (71 2 ) 21.5m (70 7 ) 3.47m (11 5 ) 8.17m (26 9 ) 3.8m (12 5 ) The Terex Finlay V-2050 is a high capacity tracked Rock on Rock (ROR) vertical shaft impactor. The high velocity rock on rock crshing process prodces a sperior high specification prodct in qarrying and mineral processing indstries with excellent overall plant throghpt capacity. This impressive machine is bilt arond the field-proven Canica V-2050 chamber that featres a new patent pending hydralically controlled dal flow system. The heart of the VSI is the 6 port heavy dty closed rotor especially sited to more abrasive applications and minimises wear costs. 17.0m (55 9 ) 3m (9 10 ) 18.5m (60 8 ) 4.2m (13 9 ) 3.85m (12 8 ) The high prodctivity, ease of maintenance and operation makes the machine an ideal soltion for large scale prodcers and contract crshing operators. Featres: The ease of material flow throgh the machine has greatly improved with each component increasing in width as the material moves throgh the machine. Flly hydralic assisted apron setting featres makes adjstment of the aprons convenient and efficient. 5.86m (19 2 ) Featres: The crshing chamber s rock shelf is easily accessed throgh the side door, which also helps speed p maintenance checks on the rotor. Metal detection system on feed belt with ato-stop protects the chamber from tramp metal and the prge system removes contaminants from the machine. 6.0m (19 8 ) Heavy dty vibrating grizzly feeder (VGF) with integral pre-screen removes dirt fines and sizes bypass material for reprocessing. Fel efficient direct drive transmission via a cltch. Qick on-board detachable recirclating system inclding large 4.8m x 1.5m (16 x 5 ) single deck screen. Recirclating conveyor can be rotated from closed loop configration or tilized for stockpiling making an additional oversized prodct. Machine weight: 72,300Kg (159,394lbs) *est (with Prescreen, by-pass conveyor, nderpan & magnet options) Advanced variable speed control settings for prodcing a qality aggregate. Machine weight: 45,940Kg (101,280lbs) with optional hopper extensions 22 23

13 C-1540 The fel efficient direct drive Terex Finlay C-1540 cone crsher is the optimm machine for medim sized prodcers and contract crshing operators m (51 ) 2.75m (9 ) This efficient and prodctive machine featres the proven Terex 1000 cone crsher that is choke fed with integrated level sensor, atomatic tramp relief and hydralic closed side setting (CSS) adjstment. 3.45m (11 4 ) The large hopper/feeder has an atomated metal detection and a prge system to protect the cone and redce downtime by removing metal contaminants via the prge chte. 14.9m (48 11 ) 3.9m (12 9 ) Additional benefits inclde, rapid set p time, ease of maintenance, high redction ratio, high otpt capacity and advanced electronic control system. 4.35m (14 3 ) C-1540P C-1540 Featres: Fel efficient direct drive transmission via a cltch. Hydralic Tramp Relief System with atomatic reset protects the chamber and minimises downtime. Metal detection system on feed belt with ato-stop protects the cone from tramp metal and the prge system removes contaminants from the machine. Advanced load sensing axiliary hydralics maximizes plant efficiency Machine Weight: * 33,350kg (73,524lbs) * withot options 24 25

14 C-1540P C-1540 The Terex Finlay C-1540 tracked mobile cone crsher has a proven pedigree in aggregate and ore srface mining applications. This efficient and prodctive machine incorporates the proven Terex 1000 cone crsher with direct variable hydrostatic drive, atomatic tramp relief and hydralic closed side setting (CSS) adjstment. The Terex Finlay C-1540 can be fitted with an optional patented pre-screen modle which allows fines materials to bypass prior to being fed to the crshing chamber offering better wear rates in the crshing chamber. The large hopper/feeder has an atomated metal detection and a prge system to protect the cone and redce downtime by removing metal contaminants via the prge chte. Additional benefits inclde, rapid set p time, ease of maintenance, high redction ratio, high otpt capacity and advanced electronic control system. Featres: 16.9m (55 5 ) 2.8m (9 1 ) 15.79m (51 10 ) 3.77m (12 4 ) 3.45m (11 4 ) 4.75m (15 7 ) The dal powered Terex Finlay C-1540 cone crsher offers operators the flexibility to power the plant either by mains electric connection or the onboard genset powerpack configration. Either power option presents operators with significant power, servicing and maintenance cost savings in direct comparison to a diesel/ hydralic powered plant. This energy efficient and prodctive machine incorporates the proven Terex 1000 cone crsher with direct electric drive, atomatic tramp relief and hydralic closed side setting (CSS) adjstment. The Terex Finlay C-1540E can be fitted with an optional patented pre-screen modle which allows fines materials to bypass prior to being fed to the crshing chamber offering better wear rates in the crshing chamber. The large hopper/feeder has an atomated metal detection and a prge system to protect the cone and redce downtime by removing metal contaminants via the prge chte. Additional benefits inclde, rapid set p time, ease of maintenance, high redction ratio, high otpt capacity and advanced electronic control system. Featres: The plant s electrically driven power systems provide significant cost advantages and efficiencies. 16.9m (55 5 ) 3m (9 10 ) 15.79m (51 10 ) 3.77m (12 4 ) 3.5m (11 6 ) 4.75m (15 7 ) Direct hydrostatic cone drive with variable speed control gives efficient prodction and application versatility. Sperior performance in dsty applications and in high altitde environments. Optional pre-screen modle maximises prodction and redces wear on the chamber by removing fine material before it enters the cone. Optional pre-screen modle maximises prodction and redces wear on the chamber by removing fine material before it enters the cone. Metal detection system on feed belt with ato-stop protects the cone from tramp metal and the prge system removes contaminants from the machine. Machine Weight: 40,220kg (88,670lbs) (with optional pre-screen) Metal detection system on feed belt with ato-stop protects the cone from tramp metal and the prge system removes contaminants from the machine. Machine Weight: 45,320kg (99,914lbs) (With optional pre-screen) 26 27

15 C-1540RS The Terex Finlay C-1540RS tracked mobile cone crsher provides the versatility of a crshing and screening plant on one machine in aggregate and ore srface mining applications. Based on the proven and tested Terex Finlay C-1540 cone crsher, this machine variant featres an innovative on-board recirclating system and detachable sizing screen. If recirclation and sizing of materials is not reqired the sizing screen can be qickly detached from the machine withot the need for lifting eqipment. The Terex Finlay C-1540RS can be fitted with an optional patented pre-screen modle which allows fines materials to be removed prior to being fed to the crshing chamber offering higher prodction with lowest cost per ton wear and rnning costs. The large hopper/feeder has an atomated metal detection and a prge system to protect the cone and redce downtime by removing metal contaminants from the feed belt m (61 6 ) 19m (62 4 ) 3.1m (10 2 ) 4.7m (15 5 ) 3.5m (11 6 ) 4.75m (15 7 ) Featres: Detachable 3.66m x 1.53m (12 x 5 ) doble deck sizing screen passes oversize material back to the crsher via the on-board recirclating conveyor. Qick and easy detachable screen and fines conveyor for open circit crshing. The optional stacking conveyor in conjnction with the optional lower deck screen, prodces a 2nd spec d prodct. Machine Weight: 51,120kg (112,700lbs) (With optional pre-screen, mid-grade transfer & mid- grade stockpiling conveyor) C

16 C-1545 C-1545P The Terex Finlay C-1545 is a high capacity and aggressive cone crsher that consistently provides high otpt capacity and a prodct with excellent cbicity. This efficient and prodctive machine incorporates the NEW Terex 1150 cone crsher driven by direct cltch drive with variable speed, atomatic tramp relief and hydralic closed side setting (CSS) adjstment. The large hopper/feeder has a metal detection and a prge system to protect the cone and redce downtime by removing metal contaminants via the prge chte. Additional benefits inclde, rapid set p time, ease of maintenance and advanced electronic control system. Featres: NEW Terex TC 1150 cone crsher provides high redction and prodctivity ratios and gives excellent prodct cbicity. Flly Hydralic CSS Adjstment with electronic monitoring system ensres ease of operation. Fel efficient direct drive transmission throgh a wet cltch. 16.9m (55 5 ) 3m (9 10 ) 3.6m (11 10 ) 16.4m (53 10 ) 4.4m (14 5 ) 4.7m (15 5 ) The Terex Finlay C-1545P incorporates the Terex 1150 cone crsher driven throgh by direct cltch drive with variable speed, atomatic tramp relief and hydralic closed side setting (CSS) adjstment. The machine featres an on-board forward facing pre-screen modle with a 2.1m x 1.52m (7 x 5 ) single deck screen for removal or bypass of fines from the feed material. The fines material can be discharged from the machine sing the optional on-board by-pass conveyor or reintrodced onto the main prodct conveyor. Both methods improve the overall plant throghpt capacity, prodct flexibility and liner wear redction. In applications where pre-screening of the feed material is not reqired the modle can be hydralically repositioned beneath the hopper/feeder. This provides a more compact working envelope as the feeder/hopper can hydralically adjsted to feed directly into the cone chamber. Featres: NEW Terex TC1150 cone crsher provides high redction and prodctivity ratios and gives excellent prodct cbicity. The forward facing pre-screen modle maximizes prodction and redces wear on the chamber by removing fine materials before it enters the cone. 17.7m (58 1 ) 3m (9 10 ) 3.6m (12 6 ) 19.1m (62 8 ) 6.65m (21 1 ) 5.1m (16 9 ) Hydralic Tramp Relief System with atomatic reset protects the chamber and minimises downtime. The large hopper/feeder on the plant has an atomated metal detection system to protect the cone and redce downtime. Metal detection system on feed belt with ato-stop protects the cone from tramp metal and the prge system removes contaminants from the machine. Machine Weight: 43,440kg (95,769lbs) (Withot options) The pre-screen modle can be sed to prodce a roadbase prodct from the on-board side conveyor. Machine Weight: 51,680kg (113,935 lbs) Withot options 30 31

17 C-1550 C-1550P The Terex Finlay C-1550 is a high capacity and aggressive cone crsher for the srface ore mining and aggregate indstries. This efficient and prodctive machine incorporates the proven Terex 1300 cone crsher with direct variable cltch drive, atomatic tramp relief and hydralic closed side setting (CSS) adjstment. The large hopper/feeder has an atomated metal detection and a prge system to protect the cone and redce downtime by removing metal contaminants via the prge chte. Additional benefits inclde, rapid set p time, ease of maintenance, high redction ratio, high otpt capacity and advanced electronic control system. 16.8m (55 1 ) 3m (9 10 ) 3.80m (12 6 ) The Terex Finlay C-1550P incorporates the proven Terex 1300 cone crsher driven throgh by direct drive. The machine featres a patented pre-screen modle with a single deck 2.45m x 1.53m (8 x 5 ) screen for removal or bypass of fines from the feed material. The integrated chte system, below the pre-screen, allows the fines material to be discharged from the machine sing the optional by-pass conveyor or reintrodced onto the main prodct conveyor. Both methods improve the overall plant throghpt capacity, prodct flexibility and liner wear redction. The cone featres variable speed drive, hydralic tramp relief system and ability to change closed side setting while crshing. The large hopper/feeder has an atomated metal detection and a prge system to protect the cone and redce downtime by removing metal contaminants via the prge chte m (60 ) 3m (9 10 ) 7.1m (23 4 ) 19.25m (63 2 ) 4.2m (13 9 ) 3.80m (12 6 ) Featres: Flly Hydralic CSS Adjstment with electronic monitoring system ensres ease of operation. 18.5m (60 8 ) 4.2m (13 9 ) 6m (19 8 ) 4.85m (15 11 ) The hydralically adjstable feed conveyor allows the machine to be operated sing either the innovative pre-screen system or if reqired by feeding directly into the cone. Featres: Flly Hydralic CSS Adjstment with electronic monitoring system ensres ease of operation. 6.0m (19 8 ) Fel efficient direct drive transmission throgh wet cltch. Fel efficient direct drive transmission throgh wet cltch. Hydralic Tramp Relief System with atomatic reset protects the chamber and minimises downtime. Hydralic Tramp Relief System with atomatic reset protects the chamber and minimises downtime. 32 Metal detection system on feed belt with ato-stop protects the cone from tramp metal and the prge system removes contaminants from the machine. Machine Weight: 57,300kg (126,325lbs) (With optional hopper extensions) Metal detection system on feed belt with ato-stop protects the cone from tramp metal and the controllable prge system removes metal contaminants via the prge chte. Machine Weight: 67,120kg (147,974lbs) (With optional pre-screen side conveyor & hopper extensions, hot climate cooler pack & hydrallically driven water pmp) 33

18 C-1554 The Terex Finlay C-1554 is the ltimate mobile soltion for any aggregates prodcer or contractor looking for a high otpt capacity machine that provides large redction ratios and an excellent cbical shape. This aggressive machine incorporates the proven Terex MVP450x cone crsher that can accept an all in feed and featres direct variable speed cltch drive, atomatic tramp relief and hydralic closed side setting (CSS) adjstment. 17.0m (55 9 ) 3m (9 10 ) 3.80m (12 6 ) The large hopper/feeder on the plant has an atomated metal detection and a prge system designed to protect the cone and redce downtime by removing metal contaminants via the prge chte. Featres: Flly Hydralic CSS Adjstment with electronic monitoring system ensres ease of operation. 18.5m (60 8 ) 4.2m (13 9 ) 6m (19 8 ) 4.85m (15 11 ) Fel efficient direct drive transmission throgh wet cltch. Hydralic Tramp Relief System with atomatic reset protects the chamber and minimises downtime. Metal detection system on feed belt with ato-stop protects the cone from tramp metal and the prge system removes contaminants from the machine. Machine Weight: 61,060kg (134,614lbs) (With optional hopper extensions) C

19 Inclined Heavy Dty 873 Horizontal 36 37

20 Renown for its qality, performance and prodctivity the Terex Finlay 683 combines scalping, screening and stockpiling into one self contained nit. Its rgged design enables the Terex Finlay 683 with its top deck 3.66m x 1.53m (12 x 5 ) and bottom deck 3.00m x 1.53m (10 x 5 ) screen to handle materials sch as sand and gravel, limestone, crshed stone, coal, topsoil and demolition waste. Remote tipping reject grid, hydralic screen tensioning of bottom deck mesh and three on-board hydralic folding conveyors are standard. The Terex Finlay 683 is available on tracks or as a wheeled nit. Washing eqipment can be fitted to the screenbox if reqired. 15m (49 3 ) 3m (9 10 ) 16.5m (54 ) 3.25m (10 8 ) The Terex Finlay 674 is a compact easily transportable machine that offers operators rapid set p and tear down times. The screenbox featres three decks giving a large screening area of 170ft 2 to provide efficient screening even at small fractions and high capacity. The screenbox featres qick wedge tensioning, access holes and bottom deck hydralic tensioning system to redce time reqired for mesh changes. All for discharge conveyors are adjstable and hydralically fold for transport. The forth prodct oversize pls conveyor has variable tilt and side slew to accrately discharge material for recirclation and stockpiling m (53 10 ) 2.98m (9 9 ) 3.44m (11 3 ) 16.81m (55 2 ) Featres: The doble deck screen box has all rond catwalk access allowing for ease of operational maintenance. Tracked mobility and hydralic folding prodct conveyors allow for ease of movement and rapid set p. Maximm tilisation of the two decks provide ltra-efficient screening capacities even at small aggregate sizes m (56 7 ) Note: Machine shown withot tipping grid (This does not affect overall working & transport dimensions) 5.3m (17 5 ) Featres: Triple deck screen with galvanized all rond fixed catwalk access for ease of operation and maintenance. The forth (oversize pls) conveyor provides variable tilt and slide slew capability to accrately discharge materials for recirclation to crshers or for stockpiling. Maximm tilisation of the three decks provides ltra-efficient screening capabilities even at small aggregate sizes. Updated hopper and belt feeder gives improved material flow onto main conveyor m (57 1 ) 5.82m (11 1 ) Screen box angle can be hydralically adjsted to an angle between 18 and 39. Machine Weight: 24,250kg (53,462lbs) (With tipping grid) Screen box angle can be hydralically adjsted to an angle between Machine Weight: 28,500kg (62,832lbs) 38 39

21 684 2-Deck Deck The Terex Finlay 684 is a compact easily transportable machine that offers operators rapid set p and tear down times. The screenbox featres two large 4.3m x 1.7m (14 x 5 7 ) inclined screen decks giving a large screening area to provide efficient screening and high capacity. The screenbox featres qick wedge tensioning on the top deck, access holes and bottom deck hydralic tensioning system to redce time reqired for mesh changes. All three discharge conveyors are adjstable and hydralically fold for transport. 17.2m (56 6 ) 18.47m (60 8 ) 3m (9 10 ) 3.5m (11 6 ) The Terex Finlay 684 is a compact easily transportable machine that offers operators rapid setp and tear down times. The screenbox featres three large 4.3m x 1.7m (14 x 5 7 ) inclined screens giving a large screening area of 236ft 2 to provide efficient screening and high capacity. The screenbox featres qick wedge tensioning, access holes and bottom deck hydralic tensioning system to redce time reqired for mesh changes. All for discharge conveyors are adjstable and hydralically fold for transport. The forth prodct oversize pls conveyor has variable tilt and side slew to accrately discharge material for recirclation and stockpiling. 17.2m (56 6 ) 18.47m (60 8 ) 3m (9 10 ) 3.5m (11 6 ) Featres: Doble deck 4.3m x 1.7m (14 x 5 7 ) screen with fll catwalk access. Maximm tilisation of the two 4.3m x 1.7m (14 x 5 7 ) decks provides ltra-efficient screening capabilities even at small aggregate sizes m (55 9 ) 6.11m (20 1 ) Featres: Triple deck 4.3m x 1.7m (14 x 5 7 ) screen with fll catwalk access. The forth (oversize pls) conveyor provides variable tilt and slide slew capability to accrately discharge materials for recirclation to crshers or for stockpiling. Maximm tilisation of three 4.3m x 1.7m (14 x 5 7 ) decks provides ltra-efficient screening capabilities even at small aggregate sizes m (55 9 ) 6.11m (20 1 ) A combination of qick wedge tensioning on the top deck, convenient access holes and hydralic tensioning on the bottom deck ensre mesh set p and change ot times are kept to an absolte minimm. Machine Weight: 28,750kg (63,380lbs) (With tipping grid) A combination of qick wedge tensioning, convenient access holes and hydralic tensioning on the bottom deck ensre mesh set p and change ot times are kept to an absolte minimm. Machine Weight: 33,500kg (73,800lbs) 40 41

22 693+ 3m (9 10 ) 19.36m (63 6 ) 19.6m (64 3 ) 7.0m (23 1 ) Now available with dal power technology option. On-board electrical motors allow flexibility to rn from an otside power spply or standard on-board engine. 17.9m (58 8 ) Featres: 42 The doble deck 6.1m x 1.53m (20 x 5 ) screen box with fll catwalk access is the largest and most accessible in it s class. The Terex Finlay 693+ Spaleck is the ltimate in mobile fine screening and separation technology. At the heart of the plant is an innovative 2-deck German designed and constrcted high performance aggressive screenbox with state of the art flip flow technology on both the top and bottom decks. Its processing capabilities and application flexibility make the machine the ltimate tracked mobile soltion for the processing and separation of recycling materials sch as incineration slag, shredder light and heavy fraction, scrap metal, electronic scrap, compost, clay, qarry dst, agg-lime, plastic fractions, biomass, topsoil, ore and aggregates etc. Now available with dal power technology option. On-board electrical motors allow flexibility to rn from an otside power spply or standard on-board engine. Uniqe flip-flow on top and bottom deck garantees first-class screening, even for difficlt material. Doble deck screen box, each deck 5.9m x 1.5m (20 x 5 ). Non blinding screening mats - less contamination. A combination of qick wedge tensioning on the top deck and hydralic tensioning on the bottom deck ensre mesh set p and change ot times are kept to an absolte minimm. Dynamic wear resistant screening mats allow an efficient material flow - screwless monted and fast changeover. Maximm tilisation of the 6.1m x 1.53m (20 x 5 ) decks provide ltra-efficient screening capacities even at small aggregate sizes. Low maintenance, since the high acceleration on the screening mats ensres a self-cleaning effect. Screen box angle can be hydralically adjsted to an angle between 18 and 30. Wet, moist, dry and mixed materials e.g. recycling and skip waste fines material, compost, aggregates, waste wood, timber etc. 3m (9 10 ) 19.36m (63 6 ) 19.6m (64 3 ) Featres: Machine Weight: * 34,850kg (76,831lbs) * With tipping grid 3.58m (11 9 ) 3.58m (11 9 ) The doble deck Terex Finlay 693+ has been designed and developed to flfill the demands of today s high prodction prodcer. The doble deck screen configration provides two fll sized 6.1m x 1.53m (20 x 5 ) screen decks. A high capacity belt feed hopper is available with remote tipping grid or doble deck vibrating grid. Impressive featres inclde hydralic tipping reject grid complete with groser bars, three onboard hydralic folding conveyors and low level greasing access points. 7.0m (23 1 ) m (58 8 ) Machine Weight: * 34,850kg (76,831lbs) * With tipping grid 43

23 With best in class prodction levels, set p time and ease of operation, the Terex Finlay 694+ is the indstry s leading tracked mobile inclined screen. A high capacity belt feed hopper is available with remote tipping grid or doble deck vibrating grid. The triple deck screen configration provides three fll sized 6.1m x 1.53m (20 x 5 ) screens. An innovative hydralically folded forth conveyor allows simple adjstment with variable tilt and slew discharge for recirclation or stockpiling of finished material. Washing eqipment can be fitted to the screenbox if reqired between 18 degree and 30 degree m (63 6 ) 19.6m (64 4 ) 3m (9 10 ) 3.58m (11 9 ) The dal powered Terex Finlay 694+ inclined screen offers operators the flexibility to power the plant either by an electrical connection or diesel/hydralic configration. The plant featres a triple deck screen configration providing three fll sized 6.1m x 1.53m (20 x 5 ) screens. An innovative hydralically folded forth (oversize pls) conveyor allows simple adjstment with variable tilt and slew discharge, between 18 degree and 30 degree, for recirclating in closed circit with a crsher or stockpiling of finished material m (63 6 ) 19.6m (64 4 ) 3m (9 10 ) 3.58m (11 9 ) Featres: The triple deck 6.1m x 1.53m (20 x 5 ) screen box with fll catwalk access is the largest and most accessible in it s class. A combination of qick wedge tensioning, convenient access holes, and hydralic tensioning on the bottom deck ensre mesh set p and change ot times are kept to an absolte minimm. Maximm tilisation of three 6.1m x 1.53m (20 x 5 ) decks provide ltra-efficient screening capacities even at small aggregate sizes. 17.9m (58 8 ) 7.0m (23 1 ) Featres: The plant s electrically driven power system provide significant cost advantages and efficiencies. Sperior performance in dsty applications and in high altitde environments. The triple deck 6.1m x 1.53m (20 x 5 ) screen box with fll catwalk access is the largest and most accessible in it s class. 17.9m (58 8 ) 7.0m (23 1 ) The forth (oversize pls) conveyor provides hydralic variable tilt and side slew capability to accrately discharge materials for recirclation to crshers or for stockpiling. Maximm tilisation of three 6.1m x 1.53m (20 x 5 ) decks provide ltra-efficient screening capacities even at small aggregate sizes. Screen box angle can be hydralically adjsted to an angle between 18 and 30 Machine Weight: 39,250kg (86,531lbs) (With tipping grid) Screen box angle can be hydralically adjsted to an angle between 18 and 30 Machine Weight: 40,000kg (88,184lbs) (With tipping grid) 44 45

24 The Terex Finlay 863 mobile tracked heavy dty screen is a compact and aggressive forward facing screen. This flexible and mobile plant can work in aggregates, sand and gravel, top soil, constrction demolition and recycling applications where site space is at a premim. The flly self-contained plant can be hydralically folded and ready for transport in less than an hor making it the ideal machine for contract screening. The plant has the capacity to process at a rate of p to 280 tonnes per hor and can be fed either by a tracked mobile crsher or an excavator. 9.6m (31 6 ) 2.55m (8 4 ) 12.1m (39 8 ) * 3.1m (10 2 )* The NEW Terex Finlay 873 is ideally sited to working in aggregates, sand and gravel, top soil, constrction demolition and recycling applications. This highly versatile machine can be fed either by a tracked mobile crsher, shovel or an excavator and has the capacity to process at a rate of p to 450 Tonnes per hor. Now available with dal power technology option. On-board electrical motors allow flexibility to rn from an otside power spply or standard onboard engine. 13.7m (45 ) 13.9m (45 7 ) 3m (9 8 ) 3.4m (11 2 ) Featres: Aggressive screen box can accept bofor bars, screenharps, woven mesh, pnch plate and cascade fingers. Screen box angle can be hydralically adjsted to an angle between 14º to 18º. Screen box discharge end can be hydralically raised 500mm to facilitate efficient and easy media access and changing. 3.85m (12 8 ) 14.10m (46 3 ) 3.5m (11 6 ) Featres: Screen box angle can be hydralically adjsted to an angle between 13º to 19º. Screen box discharge end raises hydralically 500mm to facilitate mesh changing. Screen box can accept pnch plate, cascade fingers, bofar bars and speedharps. Galvanised access catwalk on both side of screen. Oversize conveyor angle can be adjsted from 18º to 24º. 4.5m (14 9 ) 12.6m (41 4 ) 3.3m (10 10 ) Oversize conveyor angle can be hydralically adjsted from 15º to 24º. Machine Weight: 18,300kg (40,350lbs) 1.2m wide Belt feeder complete with 7m 3 manal folding hopper. Machine Weight: * 26,300kg (57,982lbs) * Standard Machine configration 46 47

25 The NEW Terex Finlay 873 Spaleck is ideally sited to working in aggregates, sand and gravel, top soil, constrction demolition and recycling applications. This highly versatile machine can be fed either by a tracked mobile crsher, shovel or an excavator. The niqe stepped top deck design combined with state of the art flip flow technology on the bottom deck cataplts the 873 Spaleck into a class of its own. Its processing capabilities and application flexibility make the machine the only all in one mobile soltion for processing difficlt waste, recycling, slag, C&D, shredded metal, wood, compost, mlch, ores, coal, soil... Now available with dal power technology option. On-board electrical motors allow flexibility to rn from an otside power spply or standard on-board engine. Featres: 13.7m (45 ) 3m (9 10 ) 13.9m (45 7 ) 3.4m (11 2 ) The high performance Terex Finlay 883+ is designed to work after a primary crsher or on it s own as a frontline tracked mobile screening machine. Applications inclde qarrying, mining constrction and demolition debris, topsoil, recycling, sand, gravel, coal and aggregates. The plant has the capacity to process at a rate of p to 500 tonnes per hor and can be fed either by a tracked mobile crsher or an excavator. Now available with dal power technology option. On-board electrical motors allow flexibility to rn from an otside power spply or standard on-board engine. 14.8m (48 8 ) 14.8m (48 8 ) 3m (9 10 ) 3.4m (11 2 ) Nearly blockage-free screening in the pper and lower deck thanks to tried and tested 3D and Flip-Flow technology. 12.6m (41 4 ) Featres: 12.6m (41 4 ) The 3D screening segments garantee accrate screening with no long pieces passing into the middlegrade material. The Flip-Flow screen with screwless monted screen mats avoids nnecessary cleaning and redces maintenance times. Galvanised access catwalk on both side of screen. Oversize conveyor angle can be adjsted from 18º to 24º. * Showing telescopic side conveyor option 4.8m (15 9 ) Aggressive screen box can accept bofor bars, speedharps woven mesh, pnch plate, tines and cascade fingers. Modlar configration screen box with 4.8m x 1.5m (16 x 5 ) top deck and bottom deck screen. Screen box angle can be hydralically adjsted to an angle between 13º to 19º. Screen box discharge end can be hydralically raised 500mm to facilitate efficient and easy media access and changing. *Showing telescopic side conveyor option 4m (13 1 ) m wide Belt feeder complete with 7m 3 manal folding hopper. Machine Weight: 25,800kg (56,879lbs) (Standard Machine Configration Estimated) All stockpiling conveyors are hydralic angle adjstable. Machine Weight: 31,000kg (68,340lbs) (Standard Machine configration) 49

26 The Terex Finlay 883+ Spaleck is the ltimate in mobile screening and separation technology. At the heart of the machine is the 2 deck German designed and constrcted high performance screenbox. The niqe stepped top deck design combined with state of the art flip flow technology on the bottom deck cataplts the 883+ Spaleck into a class of its own. Its processing capabilities and application flexibility make the machine the only all in one mobile soltion for processing difficlt waste, recycling, slag, C&D, shredded metal, wood, compost, mlch, ores, coal, soil... The Spaleck heavy dty vibrating screen is near to blockage and maintenance-free and has a processing range of 1mm to 120mm. 14.8m (48 8 ) 3m (9 10 ) 14.8m (48 8 ) 3.4m (11 2 ) The Terex Finlay 893 heavy dty screen is a robst high capacity machine, engineered and bilt for working in qarrying, mining, constrction and demolition debris, topsoil, recycling, sand, gravel, coal and aggregate applications. The 893 featres an aggressive forward-facing inclined modlar configration screen box with a 6.1m x 1.83m (20 x 6 ) top deck and a 5.5m x 1.83m (18 x 6 ) bottom deck and can accept bofar bars, speedharps, woven mesh, pnch plate, tines and cascade fingers. 17.9m (58 8 ) 3m (9 10 ) 18.3m (60 8 ) 3.6m (11 9 ) Now available with dal power technology option. On-board electrical motors allow flexibility to rn from an otside power spply or standard on-board engine. Featres: Versatile aggressive screen box can be easily adapted to sit many applications. 50 Featres: Uniqe, stepped, 3D pnch plate top deck design. State of the art Flip - Flow technology bottom deck. Flexibility to work in difficlt waste processing, slag, biomass, compost, etc. Screen box discharge end can be hydralically raised 500mm to facilitate efficient and easy media access and changing. All stockpiling conveyors are hydralic angle adjstable. 12.6m (41 4 ) * Showing telescopic side conveyor option 4m (13 1 ) Machine Weight: 30,500kg (67,240lbs) (Standard Machine Configration Estimated) Modlar configration screen box with 6.1m x 1.83m (20 x 6 ) top deck and 5.5m x 1.83m (18 x 6 ) bottom deck screen. Screen box angle can be hydralically adjsted to an angle between 14º to 18º. Screen box discharge end can be hydralically raised 600mm to facilitate efficient and easy media access and changing. All stockpiling conveyors are hydralic angle adjstable with hydralic extending head sections for maximm discharge & stockpile height. Apron feeder angle adjstable, lower position to accommodate crsher feed, high position provides redced feeder incline angle when operated in direct feed mode from excavator/loader m (53 ) *Machine shows, Feeder at max feed height Screen at max working angle Conveyor max discharge height 5.6m (18 5 ) Machine Weight: 48,000kg (106,000lbs) Estimated 51

27 984 The Terex Finlay 984 is a high performance horizontal 3 deck screener that is easy to set p, versatile and ideal for handling large volmes of material in qarrying, mining and recycling applications. Incorporating the proven 6.1m x 1.93m (20 x 6 4 ) Terex Cedarapids 6203 triple shaft screen for screening for prodct sizes of prodcts maximising throghpt and profitability. The adjstable elliptical throw of the three deck screen combines linear and circlar amplitde to prodce and aggressive screening action that redces plgging and increases qality otpt. The 4 on-board prodct conveyors provide generos stockpiling capacity and fold hydralically into one of the smallest transport envelopes for this class of machine. 18.9m (62 0 ) 21.7m (71 2 ) 3.5m (11 6 ) 3m (9 10 ) 4.7m (15 6 ) 18.2m (59 9 ) Featres: The innovative patented hydralic folding conveyors system enables compact transport envelope width of only 3m (9 10 ). 52 The innovative oval-throw action makes the horizontal screen virtally non-plgging. The ability to fine tne stroke angle, amplitde and speed of the screenbox allows throghpt of materials p to 800tph. Machine Weight: 43,100Kg (95,019lbs) (Standard Machine configration)

28 C-1540RS The Terex Finlay 390 Hydrascreen is a high performance portable screening plant developed to flfill the demands of today s high prodction aggregate prodcer. Fitted with hydralic variable angle adjstment on the screenbox and a high capacity belt feed Hopper, the Terex Finlay 390 is eqally impressive screening coal or washing sand and gravel. Options inclde doble deck vibrating grid, 3-deck screenbox, catwalks and washing eqipment. The Terex Finlay 390 is available with either diesel or electric drive options m (45 1 ) 3.52m (11 7 ) 2.61m (8 7 ) The Terex Finlay 595 Hydratrak is a self contained high capacity mobile scalping nit. Designed and constrcted to the highest specification, the 595 can withstand the toghest of applications from waste reclamation projects to qarry face and demolition environments, special featres inclde a heavy dty twin deck vibrating grid, remote control movement and a tracked ndercarriage. 9.72m (31 11 ) 2.62m (8 7 ) 3.2m (10 6 ) 21.18m (69 6 ) 2.61m (8 7 ) 10.5m (34 7 ) 2.65m (8 8 ) Featres: 12 x 5 Screen box on all decks with variable amplitde & screen angle Extremely fel efficient Diesel-hydralic system: Avg 3.5 Gal/Hr Machine available with an Electric-Hydralic option for connection to mains power Large Capacity 14ft loading hopper c/w remote controlled tipping reject grid Available with fll Rinse kit for washing applications 6.41m (21 0 ) Featres: Heavy dty aggressive scalping and screening doble deck grid. Robst T-Bar cassette top deck and meshed bottom deck configration for accrate screening of prodct material. 4.27m (14 4 ) Compact folding for ease of transport Machine Weight: 18,000kg (39,700lbs) Hydralic folding main conveyor and grid raise allow for rapid set p and tear down times. Machine Weight: 19,500kg (42,990lbs) (Standard Machine configration) 54 55

29 The Terex Finlay tracked mobile conveyor range crrently consists of two self-powered tracked options, 65ft and 80ft. Transport costs of each conveyor are kept to a minimm, de to the compact transport design, allowing them to be easily tracked in and ot of a 40ft container and shipped globally. A simple yet robst design allows for easy setp and positioning to fit the cstomers reqirements. The kW (49hp) Detz engine and powerfl hydralic drive deliver impressive capacities of p to 400tph. The design provides a fll range of high specification options inclding fll nder belt and head drm garding, radio control movement and setp where reqired. TC-65 TC m (62 5 ) 2.25m (7 4 ) 21.4m (70 11 ) 2.26m (7 5 ) 11.3m (37 ) 2.26m (7 5 ) 8.73m (28 7 ) 11.88m (38 11 ) 2.26m (7 5 ) 2.53m (8;4 ) 2.54m (8 4 ) 10.01m (28 7 ) 56 Machine Weight: 11,300kg (24912lbs) Machine Weight: 13,100kg (28880lbs) 57

30 FLEET MANAGEMENT SYSTEM J-1175 Jaw Crsher J-1175 Jaw Crsher ENABLES YOU TO J-1175 Jaw Crsher MANAGE YOUR ENTIRE FLEET 24/7 MACHINE DIAGNOSTIC BOOST PROFITS 1. CREATING A SERVICE SCHEDULE FOR FLEET OF MACHINES Series ANYTIME REMOTE ACCESS TO MACHINE HOURS AND LOCATION, FUEL CONSUMPTION, IDLE TIME, MAINTENANCE REMINDERS, AND MORE FROM YOUR DESKTOP OR MOBILE DEVICE MACHINE SCHEDULING GIVES YOU 883+ J Series Jaw Crsher 1. USE THE MACHINE UTILISATION FEATURETO MONITOR MACHINES EFFICIENCY, TO MAKE PRODUCTION IMPROVEMENTS AND BOOST YOUR PROFITS J-1175 Jaw Crsher SERVICE TECHNICIAN DISPATCHED WITH REQUIRED PARTS ON FIRST TRIP 2. CO-ORDINATE RESOURCES AND PARTS REQUIRED TO CARRYOUT SERVICE AND MAXIMIZE UPTIME 5. PRODUCTION COSTS 123 T-LINK PROVIDES ACCURATE INFORMATION TO HELP YOU BETTER UNDERSTAND YOUR TRUE PRODUCTION COSTS ON FIRST 2. TRIP 4. SYSTEM OPERATOR CONFIRMS DIAGNOSTIC AND AGREES REMEDIAL ACTION WITH OPERATOR 24/7 J-1175 Jaw Crsher SENDS DIAGNOSTIC TROUBLE CODES VIA CELL OR SATELLITE 3. A BL A L I E N O W AVA I LA B LE 3. SERVICE PLANNING MACHINE HAS AN ISSUE SERVICE TECHNICIAN DISPATCHED WITH ANY PARTS REQUIRED AV Jaw Crsher NOW J-1175 SYSTEM OPERATOR ANALYSES DATA: - DIAGNOSTIC TROUBLE CODES - MAINTENANCE / REPLACEMENT NOTIFICATION Series LE TM GEOFENCE AND TIMEFENCE ALERTS 58 N O W AVAILA B F LE ET M A N AG E M E NT SYSTE M 59

31 Terex Finlay Drmqin Road, Omagh, Co. Tyrone, N. Ireland, BT78 5PN T: F: E: Terex Finlay - North America Electron Drive Loisville KY Terex Finlay - North America USA11001 Electron Drive Loisville T: +1 KY F: +1 USA E: keith.mccann@terex.com T: F: E: keith.mccann@terex.com Terex Finlay - India Infotech IT Park, Plot No. 110A, B, Phase 1, Electronic Terex Finlay City, Bangalore - India IndiaInfotech IT Park Plot NO. 110A, B, Phase 1 Tel: +91 Electronic City, 2004 Bangalore Fax: Indian viraj.parthi@terex.com T: F: E: viraj.parthi@terex.com 60