TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS)

Transcription

1 TECHNICAL MANUAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS) PERISCOPE, TANK: M35E1 ( ) This copy is a reprint which includes current pages from Change 1. H E A D Q U A R T E R S, D E P A R T M E N T O F T H E A R M Y DECEMBER 1980

2 C1 CHANGE HEADQUARTERS DEPARTMENT OF THE ARMY No. 1 Washington, DC 29 December 1987 DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS) PERISCOPE, TANK: M35E1 ( ) TM P, 30 December 1980, is changed as follows: 1. Remove old pages and insert new pages as indicated below. 2. New or changed material is indicated by a vertical bar in the margin of the page. Remove Pages Insert Pages i(ii blank) i(ii blank) 39 and and and and and 54 53(54 blank) 55 and 56 (55 blank)56 63 and 64 63(64 blank) 65(66 blank) None 69 through through 74 File this sheet in the back of the publication for reference purposes.

3 By Order of the Secretary of the Army: CARL E. VUONO General, United States Army Chief of Staff Official: R. L DILWORTH Brigadier General, United States Army The Adjutant General DISTRIBUTION: To be distributed in accordance with DA Form 12-41, Direct Support and General Support Maintenance requirements for Periscope, Tank, M35E1.

4 TECHNICAL MANUAL HEADQUARTERS DEPARTMENT OF THE ARMY TM P WASHINGTON, DC, 30 December 1980 DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAIRITENAICE REPAIR PARTS) FOR PERISCOPE, TANK: M35E1 ( ) Current as of 20 April 1987 REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this manual. If you find any mistakes or if you know of a way to improve the procedures, please let us know. Mail your letters, DA Form 2028 (Recommended Changes to publications and Blank Forms), or DA Form located in back of this manual direct to: Commander, US Army Armament, Munitions and Chemical Command: ATTN: AMSMC-MAS, Rock Island, IL A reply will be furnished to you. Page Illus. Figure SECTION I INTRODUCTION...1 II REPAIR PARTS LIST...7 Group 7900 Tank periscope, M35E Head assembly Support assembly Body assembly Elbow assembly Cell assembly Eyepiece assembly Switch assembly Reticule assembly Knob assembly Knob assembly Bulk Material...67 III Special Tools and Test Equipment IV. NATIONAL STOCK NUMBER AND PART NUMBER INDEX...70 Change 1 i(ii blank)

5 1. Scope This manual lists spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for the performance of direct support and general support maintenance of the Tank Periscope, M35E1. It authorizes the requisitioning and issue of spares and repair parts as indicated by the source and maintenance codes. 2. General This Repair Parts and Special Tools List is divided into the following sections: a. Section II. Repair Parts List. A list of spares and repair parts authorized for use in the performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in numeric sequence, with the parts in each group listed in figure and item number sequence. Bulk materials are listed in National stock number (NSN) sequence. b. Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment authorized for the performance of maintenance. c. Section IV. National Stock Number and Part Number Index. A list in National item identification number (NIIN, the last nine figures of the NSN) sequence, of all National stock numbers (NSNs) appearing in the listings, followed by a list in alphanumeric sequence of all part numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to each illustration figure and item number appearance. 3. Explanation of Columns a. Illustration. This column is divided as follows: (1) Figure numbers. Indicates the figure number of the illustration on which the item is shown. (2) Item number. The number used to identify item called out in the illustration. b. Source, Maintenance, and Recoverability (SMR) SECTION I. INTRODUCTION TM P Codes. (1) Source code. Source codes indicate the manner of acquiring support items for maintenance, repair, or overhaul of end items. Source codes are entered in the first and second positions of the Uniform SMR Code format as follows: Code Definition PA... Item procured and stocked for anticipated or known usage. PB... Item procured and stocked for insurance purposes because essentially dictates that a minimum quantity be available in the supply system. PC... Item procured and stocked and which otherwise would be coded PA except that it is deteriorate in nature. PD... Support item, excluding support equipment, procured for initial issue or outfitting and stocked only for subsequent or additional initial issues or outfitting. Not subject to automatic replenishment. PE... Support equipment procured and stocked for initial issue or outfitting to specified maintenance repair activities. PF... Support equipment which will not be stocked but which will be centrally procured on demand. PG... Item procured and stocked to provide for sustained support for the life of the equipment. It is applied to an item peculiar to the equipment which, because of probable discontinuance or shutdown of production facilities, would prove uneconomical to reproduce at a later time. KD... An item of a depot overhaul/repair kit and not purchased separately. Depot kit defined as a kit that provides items required at the time of overhaul or repair. KF... An item of a maintenance kit and not purchased separately. Maintenance kit defined as a kit that provides an item that can be replaced at organizational or intermediate levels of maintenance. KB... Item included in both a depot overhaul/repair kit and a maintenance kit. 1

6 Code Definition MO...Item to be manufactured or fabricated at organizational level. MF... Item to be manufactured or fabricated at the direct support maintenance level. MH...Item to be manufactured or fabricated at the general support maintenance level. MD...Item to be manufactured or fabricated at the depot maintenance level. AC... Item to be assembled at organizational level. AF... Item to be assembled at direct support maintenance level. AH... Item to be assembled at general support maintenance level. AD...Item to be assembled at depot maintenance level. XA... Item is not procured or stocked because the requirements for the item will result in the replacement of the next higher assembly. XB... Item is not procured or stocked. If not available through salvage, requisition. XC... Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufacturer s part number. XD... A support item that is not stocked. When required, item will be procured through normal supply channels. NOTE Cannibalization or salvage may be used as a source of supply for any items coded above except those coded XA and aircraft support items as restricted by AR (2) Maintenance code. Maintenance codes are assigned to indicate the levels of maintenance authorized to USE and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the Uniform SMR Code format as follows: (a) The maintenance code entered in the third position will indicate the lowest maintenance level authorized to remove, replace, and use the support item. The maintenance code entered in the third position will indicate one of the following levels of maintenance: TM P Code Application/explanation C... Crew or operator maintenance performed within organizational maintenance. C... Support item is removed, replaced, used at the organizational level. F... Support item is removed, replaced, used at the direct support level. H...Support item is removed, replaced, used at the general support level. D...Support items that are removed, replaced, used at depot, mobile depot, or specialized repair activity only. (b) The maintenance code entered in the fourth position indicates whether the item is to be repaired and identifies the lowest maintenance level with the capability to perform complete repair (i.e., all authorized maintenance functions). This position will contain one of the following maintenance codes: Code Application/explanation 0... The lowest maintenance level capable of complete repair of the support item is the organizational level. F... The lowest maintenance level capable of complete repair of the support item is the direct support level. H... The lowest maintenance level capable of complete repair of the support item is the general support level. D... The lowest maintenance level capable of complete repair of the support item is the depot level. L... Repair restricted to specialized repair activity. Not applicable. Z... Nonreparable. No repair is authorized. B... No repair is authorized. The item may be reconditioned by adjusting, lubricating, etc., at the user level. No parts or special tools are procured for the maintenance of this item. (3) Recoverability code. Recoverability codes are assigned to support items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the Uniform SMR Code format as follows: 2

7 Recoverability Code Definition Z...Nonrepairable item. When unserviceable, condemn and dispose at the level indicated in position Reparable item. When uneconomically reparable, condemn and dispose at organizational level. F... Reparable item. When uneconomically reparable, condemn and dispose at the direct support level. HE...Reparable item. When uneconomically reparable, condemn and dispose at the general support level. D... Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not authorized below depot level. L... Reparable item. Repair, condemnation, and disposal not authorized below depot/specialized repair activity level. A... Item requires special handling or condemnation procedures because of specific reasons (i.e., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. c. National Stock Number. Indicates the National stock number assigned to the item and which will be used for requisitioning purposes. d. Part Number. Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items. NOTE When a stock numbered item is requisitioned, the item received may have a different part number than the part being replaced. e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a five-digit numeric code listed in SB which is used to identify the manufacturer, distributor, or Government agency, etc. f. Description. Indicates the Federal item name and, if required, a minimum description to identify the item. Items that are included in kits and sets are listed below the name of the kit or set with the quantity of each item in the kit or set indicated in the quantity incorporated in unit column. When the part to be used differs between serial numbers of the same model, the effective serial numbers are shown as the last line of the description. In the special tools list, the initial basis of issue (OI!) appears as the last line in the entry for each special tool, special TMDE, and other special support equipment. When the density of equipments supported exceeds density spread indicated in the basis of issue, the total authorization is increased accordingly. g. Unit of Measure (U/M). Indicates the standard of the basic quantity of the listed item as used in performing the actual maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g., ea., in., pr, etc). When the unit of measure differs from the unit of issue, the lowest unit of issue that will satisfy the required units of measure will be requisitioned. h. Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of a quantity indicates that no specific quantity is applicable (e.g., shims, spacers, etc.). 4. Special Information a. Detailed manufacturing instructions for items source coded to be manufactured or fabricated are found in TM 9- i h series. Bulk materials required to manufacture items are listed in the Bulk Material Group of this manual. b. The following publications pertain to Tank Periscope, M35E1 and its components: Publication and Short Title TM , Operator s Manual: Tank, Combat, Full- Tracked: 105-MrM Gun, M60A3 Turret TM , Organizational Maintenance Manual: Tank, Combat, Full-Tracked: 105-NM Gun, M60A3 Turret TM P-2, Organizational Maintenance Repair Parts and Special Tools List for Turret of Tank, Combat, Full-Tracked: 105-MM4 Gun, M60A3 Turret TM , Direct Support and Central Support Maintenance Manual for M35E! Periscope, Tank 3

8 5. How to Locate Repair Parts a. When National Stock Number or Part Number is Unknown: (1) First. Using the table of contents, determine the functional group within which the item belongs. This is necessary since illustrations are prepared for functional groups and listings are divided into the same groups. (2) Second. Find the illustration covering the functional group to which the item belongs. (3) Third. Identify the item on the illustration and note the illustration figure and item number of the item. (4) TM P (4) Fourth. Using the repair parts listing, find the figure and item number noted on the illustration. b. When National Stock Number or Part Number is Known: (1) First. Using the index of National stock numbers and part numbers, find the pertinent NSN or part number. This index is in NIIN sequence followed by a list of part numbers in alphanumeric sequence, cross-referenced to the illustration figure number and item number. (2) Second. After finding the figure and item number, locate the figure and item number in the repair parts list. 6. Abbreviations (Not applicable) 4

9 THIS PAGE INTENTIONALLY LEFT BLANK (5

10 Figure 1. Tank periscope, M35E

11 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP TANK PERISCOPE M35E PAODD ELBOW ASSEMBLY (Figure 5) EA I 1 2 PAOZZ MS SCREW, CAP, SOCKET HEAD EA PAOZZ MS WASHER, LOCK EA PAODL BODY ASSEMBLY (Figure 4) EA PAODD HEAD ASSEMBLY (Figure 2) EA PADZZ MS SCREW, MACHINE EA MDDZZ PLATE, IDENTIFICATION (MFD EA 1 FROM ) 7

12 TM P Figure 2. Head assembly sheet 1 o/ 6). 8

13 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP HEAD ASSEMBLY PADZZ MS SCREW, MACHINE EA PADZZ MS WASHER, LOCK EA XBDZZ COVER EA PADZZ MS SCREW, MACHINE EA XBDZZ COVER EA PADZZ PLUG EA PADZZ MS PIN, STRAIGHT EA 1 9

14 Figure 2. Head assembly (sheet 2 of 6). 10

15 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP HEAD ASSEMBLY (Continued) 2 8 PAOZZ SCREW, MACHINE EA PAOZZ CAP, PNEUMATIC VALVE EA PAFZZ MS VALVE, CORE EA PAFZZ NUT, PLAIN, HEXAGON EA PAFZZ STRAP EA PAFZZ MS VALVE, STEM EA PAFZZ MS SCREW, MACHINE EA PAFZZ MS WASHER, LOCK EA PAFZZ LATCH EA PADZZ MS SCREW, MACHINE EA PADZZ STOP EA PAFZZ MS SCREW, CAP, SOCKET HEAD EA PAFZZ MS WASHER, LOCK EA PAFZZ BRACKET EA PADZZ MS SETSCREW EA 2 11

16 Figure 2. Head assembly (sheet 3 of 6). 12

17 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP HEAD ASSEMBLY (Continued) 2 8 PAOZZ SCREW, MACHINE... EA PAOZZ CAP, PNEUMATIC VALVE... EA PAFZZ MS VALVE, CORE... EA PAFZZ NUT, PLAIN, HEXAGON... EA PAFZZ STRAP... EA PAFZZ MS VALVE, STEM... EA PAFZZ MS SCREW, MACHINE... EA PAFZZ MS WASHER, LOCK... EA PAFZZ LATCH... EA PADZZ MS SCREW, MACHINE... EA PADZZ STOP... EA PAFZZ MS SCREW, CAP, SOCKET HEAD... EA PAFZZ MS WASHER, LOCK... EA PAFZZ BRACKET... EA PADZZ MS SETSCREW... EA 2 11

18 Figure 2. Head assembly (sheet 3 of 6 ). 12

19 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP HEAD ASSEMBLY (Continued) 2 23 PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA XBDZZ COVER... EA XDDZZ MS PIN, STRAIGHT... EA PADZZ MS SCREW, MACHINE... EA PADZZ CLIP... EA PADZZ WINDOW... EA PADZZ MS SCREW, MACHINE... EA MDDZZ PLATE. IDENTIFICATION (MFD... EA 1 FROM ) 2 32 PADZZ MS PLUG, EXPANSION... EA 13

20 Figure 2. Head assemb1y (Sheet 4 of 6) 14

21 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP HEAD ASSEMBLY (Continued) 2 33 PADZZ MS RING, RETAINING... EA XDDZZ SLIDER (Included with item 51)... EA PADZZ MS RING, RETAINING... EA PADZZ SCREW, CAP, SOCKET HEAD... EA PADZZ ECCENTRIC... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA XBDZZ CAP... EA PADZZ MS SETSCREW... EA PADDD COUPLING ARM ASSEMBLY... EA PADZZ MS RING... EA PADZZ PLUNGER... EA PADZZ SPRING... EA PADZZ ARM... EA PADZZ SCREW... EA PADZZ ECCENTRIC... EA PADZZ MS RING... EA PADZZ SCREW, ASSEMBLED WASHER... EA PADZZ ARM (RIVETED)... EA PADZZ SUPPORT ASSEMBLY (Figure 3)... EA 1 15

22 TM P Figure 2. Head assem bly (sheet 5 of6). 16

23 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP HEAD ASSEMBLY (Continued) 2 53 PAHZZ MS SCREW, MACHINE...EA XBHZZ STRIP...EA XBHZZ STRIP...EA PAHZZ WINDOW...EA XBDZZ COVER, WINDOW...EA PADZZ MIRROR...EA PADZZ MS SCREW, MACHINE...EA PADZZ BRIDGE...EA PADZZ MS PIN, STRAIGHT...EA PAFZZ MS SCREW, CAP, SOCKET HEAD...EA PAFZZ BRACKET...EA PAFZZ MS SCREW, MACHINE...EA A PAFZZ MS WASHER, LOCK...EA PAFZZ STRIKE...EA PADZZ MS SETSCREW...EA 5 17

24 Figure 2. Head assembly (sheet 6 of 6]. 18

25 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP HEAD ASSEMBLY (Continued) 2 67 XDDZZ PLUG... EA PADZZ RING... EA PADZZ WINDOW, OPTICAL INSTRUMENT... EA 1 OR 2 69 PADZZ WINDOW, OPTICAL INSTRUMENT... EA PADZZ PACKING... EA PADZZ WEDGE ASSEMBLY... EA 1 OR 2 71 PADZZ WEDGE ASSEMBLY... EA XADZZ HOUSING... EA 1 19

26 Figure 3. Support assembly

27 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP SUPPORT ASSEMBLY PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA PADZZ MS WASHER, FLAT... EA XDDZZ WEIGHT... EA PADZZ SHIM... EA V 3 6 PADZZ MIRROR... EA XADZZ SUPPORT... EA 1 21

28 Figure 4. Body assembly--i (.sheet 1 of 5). 22

29 SECTION II TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER FSCM NUMBER USABLE ON CODE U/M IN UNIT GROUP BODY ASSEMBLY (Continued) 4 1 PAFZZ MS SCREW, MACHINE... EA PAFZZ PLATE, INSTRUCTION... EA PADZZ MS SCREW, MACHINE... EA MDDZZ PLATE. IDENTIFICATION (MFD... EA 1 FROM ) 4 5 PAFZZ MS RING, RETAINING... EA PAFZZ PLUNGER... EA PAFZZ SPRING, COMPRESSION... EA PAFZZ MS SCREW, MACHINE... EA PAFZZ KEY... EA PADZZ MS SCREW, MACHINE... EA PADZZ WASHER... EA PADZZ MS WASHER, LOCK... EA PADZZ MS SCREW, CAP, SOCKET HEAD... EA PADZZ CLAMP... EA PADZZ PIN, ECCENTRIC... EA PAOZZ CAP, PNEUMATIC VALVE... EA PAFZZ MS VALVE CORE... EA PAFZZ MS VALVE STEM... EA PAFZZ STRAP... EA 1 23

30 Figure 4. Body assembly ) /(sheet 2 of 5). 24

31 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP BODY ASSEMBLY (Continued) 4 20 PAFZZ KEY... EA PAFZZ MS SCREW, CAP, SOCKET HEAD... EA PAFZZ MS WASHER, LOCK... EA PAFZZ BLOCK... EA PAFZZ MS SCREW, MACHINE... EA PAHZZ PAD, RUBBER... EA XDFZZ COVER... EA PAFZZ GASKET... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA PADZZ PLATE... EA PADZZ GASKET... EA PADZZ MS SETSCREW... EA PADZZ RING, ECCENTRIC... EA PADZZ CELL ASSEMBLY... EA 1 25

32 Figure 4. Body assembly (sheet 3 OF 5)). 26

33 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP BODY ASSEMBLY (Continued) 4 35 PAFZZ SETSCREW... EA PAFFF CELL ASSEMBLY... EA A PAFZZ NUT, PLAIN, ROUND... EA B PAFZZ ADAPTER... EA C PAFZZ SETSCREW... EA D PAFZZ SCALE... EA E PAFZZ PO NTER, DIAL... EA F PAFZZ MS SETSCREW... EA PAFZZ NUT, PLAIN, ROUND... EA PADZZ MS PIN, STRAIGHT... EA PADZZ MS PACKING, PREFORMED... EA PADZZ RETAINER... EA PADZZ CELL ASSEMBLY... EA PADZZ CELL ASSEMBLY... EA PADZZ MS PACKING, PREFORMED... EA XDDZZ SLEEVE... EA PADZZ PACKING, PREFORMED... EA 1 27

34 Figure 4. Body assembly (sheet 4 of 5). 28

35 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP BODY ASSEMBLY (Continued) 4 46 PADZZ PLUG... EA A PADZZ MS SCREW, MACHINE... EA PADZZ PLUNGER... EA PADZZ MS PIN, STRAIGHT... EA PADZZ LEVER... EA PADZZ SPRING, COMPRESSION... EA PADZZ MS PIN, TAPERED... EA PADZZ HANDLE... EA PADZZ PACKING, QUAD RING... EA PADZZ SHAFT... EA 1 29

36 Figure 4. Body assembly (Sheet 5 of 5). 30

37 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP BODY ASSEMBLY (Continued) 4 55 PAOZZ MS SCREW, MACHINE... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS PIN, STRAIGHT... EA PADZZ PRISM, CEMENTED... EA PADZZ PLUG... EA PADZZ STUD... EA PADZZ SPRING... EA PADZZ WASHER... EA PADZZ FILTER, LIGHT... EA PADZZ FILTER, LIGHT... EA PADZZ FILTER, LIGHT... EA PADZZ FILTER, LIGHT... EA XBDZZ HOUSING... EA 1 31

38 Figure 5. Elbow assembly (sheet 1 of 8). 32

39 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP ELBOW ASSEMBLY PAOZZ MS SCREW, MACHINE... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA PADZZ MIRROR, BONDED... EA PADZZ MS PIN, STRAIGHT... EA PADZZ PLUG, EXTERNALLY THREADED... EA PADZZ RETAINER, OPTICAL ELEMENT... EA PADZZ LENS... EA 1 33

40 Figure 5. Elbow assembly (sheet2 of 8). 34

41 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP ELBOW ASSEMBLY (Continued) 5 9 PADZZ MS SETSCREW... EA PADZZ MS SETSCREW... EA PADZZ MS SCREW, CAP, SOCKET HEAD... EA PADZZ MS WASHER, LOCK... EA PBDDL CELL ASSEMBLY (Figure 6)... EA PADZZ MS PACKING... EA PAOZZ EYESHIELD... EA PAFDD EYEPIECE ASSEMBLY (Figure 7)... EA PAFZZ MS PACKING... EA PAFZZ MS SETSCREW... EA PAFZZ ADAPTER, THREADED... EA PAFDD SMD IMAGE INTENSIFIER ASSEMBLY... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA PADZZ MS PIN, STRAIGHT... EA PADZZ MS PACKING... EA MDDZZ MIL-W-16878/ WIRE, GREEN (MFD FROM... FT. V ) 5 26 PAFZZ MS SCREW, MACHINE... EA MDFZZ PLATE, IDENTIFICATION (MFD... EA 1 FROM ) 5 28 XADZZ HOUSING... EA 1 35

42 Figure 5. Elbow assembly (sheet 3 of 8). 36

43 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP ELBOW ASSEMBLY (Continued) 5 29 PADZZ MS SETSCREW... EA XDDZZ RING, THREADED... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, FLAT... EA PADZZ CLAMP... EA PADZZ MS SCREW, MACHINE... EA PADZZ CABLE, IMAGE TUBE... EA PADZZ PACKING, PREFORMED... EA XDDDD ADAPTER ASSEMBLY... EA XDDZZ RING, DIAPHRAGM... EA PADZZ RETAINER... EA PADZZ LENS... EA XADZZ ADAPTER... EA 1 37

44 Figure 5. Elbow assembly (sheet 4of 8). 38

45 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP ELBOW ASSEMBLY (Continued) 5 42 PAFZZ MS SCREW, MACHINE... EA PAFZZ MS WASHER, LOCK... EA PAHHH SWITCH ASSEMBLY (Figure 9)... EA PAHZZ GASKET... EA PADZZ MS SCREW, MACHINE... EA PAHZZ SHUTTER ASSEMBLY... EA PADZZ MS PACKING... EA PADZZ MS PIN, STRAIGHT... EA PAFZZ MS SCREW, MACHINE... EA PAFZZ REGULATOR ASSEMBLY... EA PAFZZ GASKET... EA PADZZ CONNECTOR, ASSEMBLY... EA PADZZ MS25082C NUT... EA PADZZ MS SETSCREW... EA XBDZZ HOUSING... EA PADZZ CONNECTOR, ELECTRICAL, ASSY... EA A PAHZZ SEMICONDUCTOR DEVICE... EA XDDZZ MS F CAP, PROTECTIVE... EA PAFZZ MS PIN, STRAIGHT... EA 1 Change 1 39

46 Figure 5. Elbow assembly (sheet 5 of 8). 40

47 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP ELBOW ASSEMBLY (Continued) 5 60 PAFZZ MS SCREW, MACHINE... EA PAFZZ LATCH... EA PADZZ KEY... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA XDDZZ COVER... EA PADZZ MS SETSCREW... EA PAOZZ CAP, AIR VALVE... EA PAFZZ MS VALVE CORE... EA PAFZZ MS VALVE STEM... EA PAFZZ , STRAP... EA 1 41

48 Figure 5. Elbow assembly (sheet 6 of 8) 42

49 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP ELBOW ASSEMBLY (Continued) 5 71 PADZZ MIRROR, BONDED... EA PADZZ CLAMP... EA 1 43

50 Figure 5. Elbow assembly (sheet 7 of 8). 44

51 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP ELBOW ASSEMBLY (Continued) 5 73 XDDZZ TUBE... EA PADZZ PACKING, PREFORMED... EA PADZZ MS SETSCREW... EA PADZZ CONTACT, STAKED... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA PADZZ PRISM, BONDED... EA PADZZ MS PIN, STRAIGHT... EA 2 45

52 Figure Elbow assembly (Sheet 8 of 8) 46

53 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP ELBOW ASSEMBLY (Continued) 5 81 PAFFF KNOB ASSEMBLY (Figure 11)... EA PAFZZ MS PACKING... EA PAFFF KNOB ASSEMBLY (Figure 12)... EA PAFZZ LAMPHOLDER, PLUG... EA PAFZZ BULB, BAYONET... EA PAFZZ MS PACKING... EA PAFZZ MS SCREW, MACHINE... EA XDDZZ COVER ASSEMBLY... EA PADZZ MS SCREW, MACHINE... EA A PADZZ MS WASHER, LOCK... EA PADDD RETICLE ASSEMBLY (Figure 10)... EA PADZZ MS PIN, STRAIGHT... EA XBDZZ HOUSING... EA PAFZZ WIRE ROPE ASSEMBLY. CABLE... EA PAFZZ CLIP, RETAINING,SPRING TENSION... EA 1 Change 1 47

54 Figure 6. Cell assembly (sheet 1 of 2). 48

55 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP CELL ASSEMBLY PAFZZ MS B RING... EA PAFZZ PLUNGER... EA PAFZZ SPRING, COMPRESSION... EA PAFZZ MS SCREW. MACHINE... EA PAFZZ MS SCREW, MACHINE... EA PAFZZ STRIKE... EA PAFZZ KEY... EA 1 49

56 Figure 6. Cell assembly (sheet 2 of 3). 50

57 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP CELL ASSEMBLY (Continued) 6 8 PADZZ RING, EXTERNALLY THREADED... EA PADZZ WINDOW, CEMENTED... EA XDDZZ SPACER... EA PADZZ MS PIN, STRAIGHT HEADLESS... EA PADZZ LENS, OBJECTIVE... EA XDDZZ SPACER... EA PADZZ LENS, OBJECTIVE... EA XDDZZ SPACER... EA PADZZ CELL ASSEMBLY... EA XADZZ CELL... EA 1 51

58 Figure 7. Eyepiece assembly

59 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP EYEPIECE ASSEMBLY PADZZ MS SETSCREW... EA XDDZZ INDEX, RING... EA PADZZ MS SETSCREW... EA PADZZ SCALE, DIOPTER... EA PADZZ SETSCREW... EA PADZZ DISC, SOLID, PLAIN... EA PADZZ NUT, PLAIN, ROUND... EA XDDZZ ADAPTER, DIOPTER SCALE... EA XDDZZ RING, THREADED... EA PADZZ MS PACKING... EA PADZZ PIN, STRAIGHT HEADED... EA XDDZZ CELL, OPTICAL ELEMENT... EA XDDZZ RETAINER, OPTICAL ELEMENT... EA PADZZ LENS, OPTICAL INSTRUMENT... EA XDDZZ SPACER, OPTICAL... EA PADZZ LENS, OPTICAL INSTRUMENT... EA XDDZZ SPACER, OPTICAL ELEMENT... EA XDDZZ SPACER, OPTICAL ELEMENT... EA PADZZ LENS, OPTICAL INSTRUMENT... EA XADZZ CELL, OPTICAL ELEMENT... EA PADZZ PACKING, PREFORMED... EA 1 All data on pages 54 and 55, including figure 8, deleted. Change 1 53(54 Blank)

60 Figure 9. Switch assembly Change 1 (55 Blank)56

61 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP SWITCH ASSEMBLY PAFZZ MS91528-OElB KNOB... EA PAHZZ RCR07G474JS RESISTOR... EA PAHZZ TERMINAL... EA MHHZZ MIL-W-16878/ WIRE, WHITE (MFD FROM... FT V ) 9 5 PAHZZ MS TERMINAL... EA PAHZZ RESISTOR, VARIABLE... EA PAHZZ M SB RESISTOR, VARIABLE... EA PAHZZ RCR05G102JS RESISTOR... EA PAHZZ MS SCREW, MACHINE... EA PAHZZ SE100D TERMINAL... EA XBHZZ PLATE... EA 1 57

62 Figure 10. Reticle assembly

63 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP RETICLE ASSEMBLY PADZZ RING, EXTERNALLY THREADED... EA PADZZ RETICLE, PROJECTION... EA PADZZ MS SCREW, MACHINE... EA PADZZ MS WASHER, LOCK... EA XADZZ COVER... EA XADZZ SUPPORT, SPUN... EA PADZZ SPRING, COMPRESSION... EA XADZZ H3LDER... EA PADZZ MS SCREW, MACHINE... EA MDDZZ PLATE (MFD FROM EA XDDZZ SLIDE, SPUN... EA PADZZ MS SCREW, MACHINE... EA PADZZ WASHER,SPRING... EA XDDZZ CELL... EA 1 59

64 Figure 11. Knob assembly

65 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP KNOB ASSEMBLY PAFZZ SCREW, SPECIAL... EA PAFZZ SPRING, COMPRESSION... EA PAFZZ KNOB, PINNED... EA PAFZZ SCALE, DEFLECTION... EA PAFZZ SPRING, FLAT... EA PAFZZ STOP, RING... EA 1 7 PAFZZ MS SCREW, MACHINE... EA PAFZZ CLUTCH... EA PAFZZ MS PIN, STRAIGHT... EA PAFZZ PACKING, PREFORMED... EA PAFZZ ADAPTER... EA PAFZZ SCREW, ADJUSTING... EA PAFZZ MS PIN, STRAIGHT... EA XAFZZ HOUSING... EA 1 61

66 Figure 12. Knob assembly

67 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP KNOB ASSEMBLY PAFZZ SCREW, SPECIAL... EA PAFZZ SPRING, COMPRESSION... EA PAFZZ KNOB, PINNED... EA PAFZZ SCALE, ELEVATION... EA PAFZZ SPRING, FLAT... EA PAFZZ STOP RING... EA PAFZZ MS SCREW, MACHINE... EA PAFZZ CLUTCH... EA PAFZZ MS PIN, STRAIGHT... EA PAFZZ PACKING, PREFORMED... EA PAFZZ ADAPTER, KNOB ASSEMBLY... EA PAFZZ SCREW, ADJUSTING... EA PAFZZ MS PIN, STRAIGHT... EA XAFZZ HOUSING... EA 1 All data on pages 64 and 65(66 blank), including figure 13, deleted. Change 1 63(64 blank)

68 (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP BULK MATERIAL BULK -- PADZZ MIL-I INSULATION SLEEVING... EA V BULK -- PADZZ M23053/ INSULATION SLEEVING... EA V BULK -- PADZZ MIL-W-16878/ WIRE, ELECTRICAL, WHITE... FT V BULK -- PADZZ MIL-W-16878/ WIRE,ELECTRICAL, BLACK... FT V BULK -- PADZZ MIL-W-16878/ WIRE, ELECTRICAL, GREEN... EA V BULK -- PADZZ GG-P-455-TY1 CL PLATE, PHOTOGRAPHIC-... SH V ALUMINUM ANODIZED,.02 THK BULK --XDFZZ ALUMINUM ALUMINUM SH V

69 Figure 14. Special tools and test equipment. 68

70 SECTION III. SPECIAL TOOLS AND TEST EQUIPMENT TM P (1) (2) (3) (4) (5) (6) (7) (8) ILLUSTRATION DESCRIPTION (a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M IN UNIT GROUP SPECIAL TOOLS AND TEST EQUIPMENT 14 1 PAFZZ DIOPTOMETER... EA 1 BOI: ONE AUTHORIZED FOR 100 EQUIPMENT 14 2 PAFZZ RING, RETAINING (EXTRACTOR)... EA 1 BOI: ONE AUTHORIZED FOR 100 EQUIPMENT 14 3 MFFZZ WRENCH, SPANNER (MFD... EA 1 FROM ALUMINUM 6061) 80: ONE AUTHORIZED FOR 100 EQUIPMENT 14 4 MFFZZ SW WRENCH, SPANNER (MFD... EA 1 FROM ALUMINUM 6061) BOI: ONE AUTHORIZED FOR 100 EQUIPMENT 69

71 SECTION IV. NATIONAL STOCK NUMBER AND PART NUMBER INDEX STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM BULK is BULK , , F B E A C A Change 1 70