TECHNICAL MANUAL AVIATION UNIT AND INTERMEDIATE MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT

Transcription

1 TECHNICAL MANUAL AVIATION UNIT AND INTERMEDIATE MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) ENGINE, GAS TURBINE MODEL T55-L-714 NSN DISTRIBUTION STATEMENT A: Approved for public release; distribution Is unlimited. HEADQUARTERS, DEPARTMENT OF THE ARMY 31 DECEMBER 1994

2 TM P CHANGE HEADQUARTERS DEPARTMENT OF THE ARMY 1 WASHINGTON, D.C., 30 November 2002 Aviation Unit and Aviation Intermediate Maintenance Repair Parts and Special Tools List (Including Depot Maintenance Repair Parts and Special Tools) ENGINE, GAS TURBINE, MODEL T55 L 714 NSN DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited TM P, 31 December 1994, is changed as follows: 1. Remove and insert pages as indicated below. New or changed text material is indicated by a vertical bar in the margin. An illustration change is indicated by a miniature pointing hand. Remove pages Insert pages A/(B blank) i and ii i and ii 3 and 4 3 and and Figure and Figure and Figure and Figure and and 59 2 I 1 and I 2 I 1 and I 2 I 7 and I 8 I 7 and I 8 I 13 through I 16 I 13 through I 16 I 23 and I 24 I 23 and I 24 I 31 and I 32 I 31 and I 32 I 43 and I 44 I 43 and I Retain this sheet in front of manual for reference purposes. By Order of the Secretary of the Army: Official: JOEL B. HUDSON Administrative Assistant to the Secretary of the Army ERIC K. SHINSEKI General, United States Army Chief of Staff DISTRIBUTION: To be distributed in accordance with Initial Distribution Number (IDN) , requirements for TM P.

3 TM P LIST OF EFFECTIVE PAGES Insert latest changed pages; dispose of superseded pages in accordance with regulations. N0TE: On a changed page, the portion of the text affected by the latest change is indicated by a vertical line, or other change symbol, in the outer margin of the page. Changes to illustrations are indicated by miniature pointing hands. Changes to wiring diagrams are indicated by shaded areas. Dates of issue for original and changed pages are: Original 31 Dec 1994 Change 1 30 Nov 2002 Page *Change Page *Change No. No. No. No. Cover Title Blank A/B Blank i and ii iii and iv and and thru Blank Figure 1 thru Blank Figure 5 thru Blank Figure 6 thru Blank Figure 10 thru Blank Figure 15 thru Blank Figure 16 thru Blank Figure Figure 18 thru Figure Figure 21 thru Figure 25 thru Blank Figure 26 thru blank Figure 36 thru Blank Figure 39 thru Blank Figure 40 thru Blank Figure 44 thru Blank Figure 45 thru Blank Figure 55 thru thru Blank KITS BULK 1 thru I I 2 thru I I I 8 thru I I I I I 17 thru I I I 25 thru I I I 32 thru I I I 44 thru I *Zero in this column indicates an original page. Change 1 A/(B blank)

4 TM P Technical Manual HEADQUARTERS DEPARTMENT OF THE ARMY P WASHINGTON D.C., 31 December 1994 TECHNICAL MANUAL AVIATION UNIT AND INTERMEDIATE MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) ENGINE, GAS TURBINE MODEL T55 L 714 NSN REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this manual. If you find any mistakes, or if you know of a way to improve these procedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to Publications and Blank Forms), or DA Form located in the back of this manual directly to: Commander, US Army Aviation and Missile Command, ATTN: AMSAM-MMC-MA NP, Redstone Arsenal, AL A reply will be furnished to you. You may also provide DA Form 2028 information to AMCOM via e mail, fax, or the World Wide Web. Our fax number is: DSN or Commercial Our e mail address is: 2028@redstone.army.mil. Instructions for sending an electronic 2028 may be found at the back of this manual immediately preceding the hard copy For the World Wide Web use: DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited TABLE OF CONTENTS PAGE ILLUST/ FIGURE Section I INTRODUCTION Section II REPAIR PARTS LIST Group 04 POWER PLANT Group 0400 POWER PLANT AND RELATED SYSTEMS AIRCRAFT TURBINE ENGINE COMPONENTS Group 0402 COMPRESSOR SECTION COMPRESSOR SECTION COMPONENTS AIRLINES AND RELATED PARTS INTERSTAGE AIR BLEED ACTUATOR ASSEMBLY AND RELATED PARTS INTERSTAGE AIR BLEED ACTUATOR ASSEMBLY COMPRESSOR BLEED BAND AND RELATED PARTS ANTI ICING AIR GALLERY COVER AND RELATED PARTS COMPRESSOR HOUSING ASSEMBLY Change 1 i

5 Group 0402 TABLE OF CONTENTS - Continued PAGE (CONTINUED) COMPRESSOR HOUSING AND INSERT ASSEMBLY COMPRESSOR ROTOR ASSEMBLY IMPELLER ASSEMBLY AIR DIFFUSER ASSEMBLY AIR DIFFUSER CASE ASSEMBLY OUTPUT SHAFT SEAL HOUSING ASSEMBLY OUTPUT SHAFT SUPPORT HOUSING ASSEMBLY INLET HOUSING ASSEMBLY INLET HOUSING STUD AND INSERT ASSEMBLY BAFFLE ASSEMBLY Group 0403 COMBUSTION SECTION COMBUSTION SECTION COMPONENTS COMBUSTOR ASSEMBLY COMBUSTION CHAMBER DRAIN VALVE ASSEMBLY COMBUSTION CHAMBER LINER ASSEMBLY COMBUSTOR HOUSING ASSEMBLY Group 0404 TURBINE SECTION TURBINE SECTION COMPONENTS POWER TURBINE ASSEMBLY THIRD TURBINE NOZZLE ASSEMBLY FOURTH TURBINE ROTOR ASSEMBLY FOURTH TURBINE NOZZLE ASSEMBLY THIRD TURBINE ROTOR ASSEMBLY SECOND TURBINE ROTOR ASSEMBLY FIRST TURBINE ROTOR ASSEMBLY TAILPIPE ASSEMBLY Group 0405 ACCESSORY GEAR SECTION ACCESSORY GEAR SECTION COMPONENTS ACCESSORY DRIVE GEARBOX ASSEMBLY ACCESSORY DRIVE GEARBOX COVER ASSEMBLY ACCESSORY DRIVE GEARBOX SUPPORT ASSEMBLY ACCESSORY DRIVE GEARBOX CASE ASSEMBLY ACCESSORY GEARBOX CASE AND STUDDING ASSEMBLY ACCESSORY DRIVE GEAR ASSEMBLY STARTER DRIVE ASSEMBLY AND RELATED PARTS STARTER DRIVE ASSEMBLY STARTER DRIVE HOUSING OVERSPEED DRIVE AND TANK OUTLET COVER ASSEMBLY Group 0406 FUEL SYSTEM FUEL SYSTEM COMPONENTS ILLUS/ FIGURE ii

6 TABLE OF CONTENTS - Continued ILLUS/ PAGE FIGURE Group 0406 (CONTINUED) HYDRO-MECHANICAL ASSEMBLY (HMA) AND RELATED PARTS DIGITAL ELECTRONIC CONTROL UNIT (DECU) AND RELATED PARTS FUEL BOOST PUMP ASSEMBLY MAIN FUEL MANIFOLD AND RELATED PARTS MAIN FUEL FILTER FUEL FILTER ASSEMBLY FUEL FILTER AND ELEMENT ASSEMBLY Group 0407 ELECTRICAL AND IGNITION SYSTEM PRIMARY ELECTRICAL HARNESS ASSEMBLY REVERSIONARY ELECTRICAL HARNESS ASSEMBLY ACCESSORY ELECTRICAL HARNESS ASSEMBLY IGNITION SYSTEM COMPONENTS THERMOCOUPLE LEAD ASSEMBLY AND RELATED PARTS RIGHT AND LEFT-HAND BUS BAR ASSEMBLIES AND RELATED PARTS THERMOCOUPLE HARNESSES AND RELATED PARTS Group 0408 LUBRICATION SYSTEM LUBRICATION SYSTEM COMPONENTS OIL COOLER ASSEMBLY OIL TEMPERATURE BULB OIL FILLER ASSEMBLY AND OIL FILLER STRAINER OIL FILTER COVER ASSEMBLY, FILTER ELEMENT, INTEGRAL BYPASS INDICATOR, AND RELEATED PARTS STARTER GEARBOX FILTER AND RELATED PARTS BEARING OIL FILTER AND RELATED PARTS AND 5 BEARING OIL FILTER AND RELATED PARTS OIL DRAIN VALVE AND RELATED PARTS SELF SEALING CHIP DETECTOR AND RELATED PARTS OIL LEVEL INDICATOR, OIL LEVEL FLOAT ASSEMBLY, AND RELATED PARTS Group 0409 TORQUEMETER SYSTEM TORQUEMETER SYSTEM COMPONENTS Group 50 REPAIR KITS... KITS-1 KITS (LISTED NUMERICALLY BY PART NUMBER)... KITS-1 KITS Group 60 BULK MATERIAL... BULK-1 BULK BULK MATERIAL... BULK-1 BULK iii

7 ILLUS/ PAGE FIGURE Section III. SPECIAL TOOLS LIST Group 81 SPECIAL TOOLS SPECIAL TOOLS Section IV. CROSS-REFERENCE INDEXES... I-1 NATIONAL STOCK NUMBER INDEX... I-1 PART NUMBER INDEX... I-15 iv

8 AVIATION UNIT AND INTERMEDIATE MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) SECTION I. INTRODUCTION 1. Scope. This RPSTL lists and authorizes spare and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for performance of Aviation Unit (AVUM), Aviation Intermediate (AVIM), and depot Maintenance of the Engine, Gas Turbine T55-L-714. It authorizes the requisitioning, issue, and disposition of spare, repair parts and special tools as indicated by the source, maintenance and recoverability (SMR) codes. 2. General. In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections: a. Section II. Repair parts List. A list of spare and repair parts authorized by this RPSTL for use in the performance of.maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending numeric sequence, with the parts in each group listed in ascending figure and item number sequence. Items listed are indented when required to indicate the relationship to the next higher assembly. Bulk materials are listed in alphabetical sequence. Repair parts kits are listed separately in their own functional group within Section II. With the exception, of Bulk/Kits figures, items listed are shown on the preceding associated illustration(s). b Section III. Special Tools List. A list of special tools, TMDE, and other special support equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in the DESCRIPTION AND USABLE ON CODE column) for the performance of maintenance. Items listed are shown on their preceding associated illustration(s). c. Section IV. National Stock Number. and Part Number Index. A list, in National Item Identification Number (NIIN) sequence, of all National Stock (NSN) numbered items appearing in the listings, followed by a list in alphanumeric sequence of all part numbers appearing in the listings. National stock numbers and part numbers are cross referenced to each illustration figure and item number appearance. 3. Explanation of Columns (Section II and III). a. Item No. (Column (1). Indicates the number used to identify items called out in the illustration. 1

9 b. SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, as shown in the following breakout: Source Code Maintenance Code Recoverability Code XX 1 st two XX X positions How you get an item. 3d position 4th position Who can install, replace or use the item. Who can do complete Repair (see note) on the item. Who determines disposition action on an unserviceable the item. *Complete repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the "Repair" function in a use/user environment in order to restore serviceability to a failed item. (1) Source Code. The source code tells you how to get an item needed for maintenance, repair, or overhaul of an end item/equipment. Explanation of source codes follows: Code Explanation PA PB PC** PD PE PF PG Stocked items; use the applicable NSN to request/ requisition items with these source codes. They are authorized to the category indicated by the code entered in the 3rd position of the SMR code. **NOTE: Items coded PC are subject to deterioration. KD KF KB Items with these codes are not to be requested/ requisitioned individually. They are part of a kit which is authorized to the maintenance category indicated in the 3rd position of the SMR code. The complete kit must be requisitioned and applied. 2

10 TM P C1 MO Made at unit / Avum level MF Made at DS / Avim level MH Made at GS level ML Made at SRA level MD Made at Depot level Items with these codes are not to be requisitioned/ requested individually. They must be made from bulk material which is identified by the part number in the DESCRIPTION AND USABLE ON CODE (UOC) column and listed in the bulk material group of the repair parts list of the RPSTL. If the item is authorized to you by the 3rd position code of the SMR code, but the source code indicates it is made at a higher level, order the item from the higher level of maintenance. AO Assembled by unit / AVUM level AF Assembled by DS / AVIM level AH Assembled by GS level AL Assembled by SRA level Items with these codes are not to be requested/ requisitioned individually. The parts that make up the assembled item must be requisitioned or fabricated and assembled at the level of maintenance indicated by the source code. If the 3rd position of the SMR code authorizes you to replace the item, but the source code indicates the item is assembled at a higher level, order the item from the higher level of maintenance. AD Assembled by Depot XA Do not requisition an XA coded item. Order the next higher assembly. (Also, Refer to the note below). XB If an item is not available from salvage, order it using the CAGEC and part number. XC Installation drawing, diagrams, instruction sheet, field service drawing; identified by manufacturer s part number. XD Item is not stocked. Order an XD coded item, through normal supply channels using the CAGEC and part number given, if no NSN is available. NOTE Cannibalization or controlled exchange, when authorized, may be used as a source of supply for items with the above source codes except for those source coded XA or those aircraft support items restricted by requirements of AR (2) Maintenance Code. Maintenance codes tells you the level(s) of maintenance authorized to USE and REPAIR support items. The maintenance codes are enterd in the third and fourth positions of the SMR Code as follows: 3

11 TM P C1 (a). The maintenance code entered in the third position tells you the lowest maintenance level authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to the following levels of maintenance: Maintenance Code Application/Explanation C Crew or operator maintenance done within unit/avum maintenance. O Unit level/avum maintenance can remove, replace, and use the item. F Direct support/avim maintenance can remove, replace, and use the item. H General support maintenance can remove, replace, and use the item. L Specialized repair activity can remove, replace, and use the item. D Depot can remove, replace, and use the item. (b). The maintenance code entered in the fourth position tells you whether or not the item is to be repaired and identifies the lowest maintenance level with the capability to do complete repair (perform all authorized repair functions). NOTE Some limited repair may be done on the item at a lower level of maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes. Maintenance Code O Application/Explanation Unit/AVUM is the lowest level that can do complete repair of the item. F Direct Support/AVIM is the lowest level that can do complete repair of the item. H General support is the lowest level that can do complete repair of the item. L Specialized repair activity (enter specialized activity designator) is the lowest level that can do complete repair of the item. D Depot is the lowest level that can do complete repair of the item. Z Nonreparable. No repair is authorized. 4

12 Code Application/ Explanation B -No repair is authorized. (No parts or special tools are authorized for the maintenance of a "B" coded item). However, the item may be reconditioned by adjusting, lubricating, etc., at the user level. (3) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows: Recoverability Code Application/Explanation Z -Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in 3rd position of SMR Code. O -Reparable item. When uneconomically reparable, condemn and dispose of the item at Aviation Unit (AVUM) level. F D L A -Reparable item. When uneconomically reparable, condemn and dispose of the item at the Aviation Intermediate (AVIM) level. -Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of item not authorized below Depot level. -Reparable item. Condemnation and disposal not authorized below Specialized Repair Activity (SRA). -Item requires special handling or condemnation procedures because of specific reasons (e.g., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. c. CAGEC (Column (3)). The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code listed in SB which is used to identify the manufacturer, distributor, or Government agency/ activity that supplies the item. 5

13 d. Part Number (Column (4)). Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. NOTE: When you use a NSN to requisition an item, the item you receive may have a different part number from the item you ordered. e. Description and Usable On Code (UOC) (Column (5)). This column includes the following information: (1) The Federal item name and, when required, a minimum description to identify the item. (2) Items that are included in kits and sets are listed below the name of the kit or set. (3) Spare/repair parts that make up an assembled item may be referenced to an applicable figure within that line item (etc., Output Shaft Support, HOUSING ASSEMBLY SEE FIGURE 13 FOR BREAKDOWN), or indented and listed immediately following the assembled item as the next line entry. (4) Part numbers for bulk materials are referenced in this column in the line item entry for the item to be manufactured/ fabricated. (5) When the item is not used with all serial numbers of the same model, the effective serial numbers are shown on the last line(s) of the description (before UOC). (6) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each special tool, special TMDE, and special support equipment. When density of equipment supported exceeds density spread indicated in the basis of issue, the total authorization is increased proportionately. (7) The statement "END OF FIGURE" appears just below the last item description in Column 5 for a given figure in both Section II and Section III. f. QTY (Column (6)). The QTY (quantity per item column) indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "VI" appearing in this column in lieu of a quantity indicates that the quantity is variable and the quantity may vary from application to application. 6

14 4. Explanation of Columns (Section IV). a. NATIONAL STOCK NUMBER (NSN) INDEX. (1) STOCK NUMBER column. This column lists the NSN BY National item identification number (NIIN) sequence. The NIIN consists of the last nine digits of the NSN, i.e.: NSN NIIN When using this column to locate an item, ignore the first 4 digits of the NSN. However, the complete NSN should be used when ordering items by stock number. (2) FIG. column. This column lists the number of the figure where the item is identified/located. The figures are in numerical order in Section II and Section III. (3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG. column. This item is also identified by the NSN listed on the same line. b. PART NUMBER INDEX. Part numbers in this index are listed BY part number in ascending alphanumeric sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group in order A through Z, followed by the numbers O through 9 and each following letter or digit in like order). (1) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code listed in SB which is used to identify the manufacturer, distributor, or Government agency/activity that supplies the item. (2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. (3) STOCK NUMBER column. This column lists the NSN for the associated part number and manuf acturer identified in the PART NUMBER and FSCM columns to the left. II and III. (4) FIG. column. This column lists the number of the figure where the item is identified/located in Section (5) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. 7

15 5. Special Information. a. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be manufactured or fabricated are found in TM b. ASSEMBLY INSTRUCTIONS. Detailed assembly instructions for items source coded to be assembled from component spare/repair parts are found in TM Items that make up the assembly are listed immediately following the assembly item entry or reference is made to an applicable figure. c. KITS. Line item entries for repair parts kits appear in a group in Section II (see table of contents). d. INDEX NUMBERS. Items which have the word BULK in the figure column will have an index number shown in the item number column. This index number is a cross-reference between the National Stock Number/ Part Number Index and the bulk material list in Section II. e. ASSOCIATED PUBLICATIONS. The publication(s) listed below pertain to Engine Model T55-L-714 and its components: Publication TM Short Title Aviation Unit and Aviation Intermediate Maintenance Manual f. Oversize and Undersize Parts. When studs, bushings, etc, are listed, the degree of oversize or undersize is stated in the description. These parts will have a required quantity shown. g. Source Control Number. When a source control number is requisitioned, several vendor items can be under this number, allowing the most economical item on hand to be shipped. h. Directional References. Left and right directions are determined by standing at the rear of the aircraft or engine and looking forward. i. Shipping and Storaqe Containers. This manual does not list spare and repair parts required for maintaining shipping and storage containers for T55-L-714 engines and modules. Refer to TB , Maintenance of Specialized Reusable Containers for Aircraft Equipment, for requisitioning spare and repair parts. j. A SMR Code with "AH" in the 1ST and 2ND Positions. A SMR Code with "AH" in the 1ST and 2ND positions indicates the source of supply as the on-site contractor support team. 8

16 6. How to Locate Repair Parts. a. When National Stock Number or Part Number is Not Known. (1) First. Using the table of contents, determine the assembly group or subassembly group to which the item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and listings are divided into the same groups. belongs. (2) Second. Find the figure covering the assembly group or subassembly group to which the item (3) Third. Identify the item on the illustration(s) and note the item number. (4) Fourth. Refer to the Repair Parts List for the figure to find the part number for the iterm number noted on the illustration(s). (5) Fifth. Refer to the Part Number Index to find the NSN, if assigned. b. When National Stock Number or Part Number is Known. (1) First. Using the Index of National Stock Numbers and Part Numbers, find the pertinent National Stock Number or Part Number. The NSN index is in National Item Identification Number (NIIN) sequence (see 4.a.(1)). The part numbers in the Part Number index are listed in ascending alphanumeric sequence (see 4.b.). Both indexes crossreference you to the illustration figure and item number of the item you are looking for. (2) Second. After finding the figure and item number, verify that the item is the one you're looking for, then locate the item number in the repair parts list for the figure. 7. Abbreviations. (Abbreviations must be applicable to specific RPSTL and not listed in MIL-STD-12). Abbreviations P/N V 1ST 2ND 3RD 4TH 5TH Explanation Part Number Variable First Second Third Fourth Fifth 9

17 FIGURE 1. AIRCRAFT TURBINE ENGINE COMPONENTS (SHEET 1 OF 2)

18 FIGURE 1. AIRCRAFT TURBINE ENGINE COMPONENTS (SHEET 2 OF 2)

19 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY `` GROUP 04: POWER PLANT GROUP 0400: POWER PLANT AND RELATED SYSTEMS FIG.1 AIRCRAFT TURBINE ENGINE COMPONENTS 1 PAODD ENGINE, AIRCRAFT, TUR... 1 AH PIPING AND ACCESS.... REF END OF FIGURE 1-1

20 FIGURE 2. COMPRESSOR SECTION COMPONENTS (SHEET 1 OF 5)

21 FIGURE 2. COMPRESSOR SECTION COMPONENTS (SHEET 2 OF 5)

22 FIGURE 2. COMPRESSOR SECTION COMPONENTS (SHEET 3 OF 5)

23 FIGURE 2. COMPRESSOR SECTION COMPONENTS (SHEET 4 OF 5)

24 FIGURE 2. COMPRESSOR SECTION COMPONENTS (SHEET 5 OF 5)

25 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.2 COMPRESSOR SECTION COMPONENTS 1 PAOZZ MS BOLT, MACHINE PAOFF HOUSING SEAL, ACCESS SEE FIGURE FOR BREAKDOWN... 3 PAOZZ SHIM IN, IN LAMINATIONS... V 4 PAOZZ M83248/1-236 PACKING, PREFORMED PAOZZ STD3019E53 PACKING, PREFORMED PAFZZ NUT, PLAIN, ROUND PAFZZ WASHER, RECESSED PAFZZ STD3019E35 PACKING, PREFORME PAFDD BEARING, BALL, DUPLEX PAFZZ SPACER IN THK... V 10 PAFZZ SPACER IN THK... V 10 PAFZZ SPACER IN THK... V 10 PAFZZ SPACER IN THK... V 10 PAFZZ SPACER IN THK... V 10 PAFZZ SPACER, OUTPUT SHAFT IN THK... V 10 PAFZZ SPACER, OUTPUT SHAFT IN THK... V 10 PAFZZ SPACER, OUTPUT SHAFT IN THK... V 10 PAFZZ SPACER, OUTPUT SHAFT IN THK... V 11 XDFZZ MS BOLT, MACHINE PAOZZ STD3018K11 WASHER, KEY PAFFF COVER ASSEMBLY, INLE XAFZZ COVER PAFZZ MS INSERT, SCREW THREAD PAFZZ PACKING, PREFORMED PAFZZ STD3019E67 PACKING, PREFORMED PAFZZ MS BOLT PAFZZ STD3018K12 WASHER, KEY PAFDD HOUSING ASSY SEE FIGURE 15 FOR... 1 BREAKDOWN PAFZZ MS BOLT, MACHINE PAFZZ FILTER ELEMENT, OIL PAFZZ M83248/1-011 PACKING, PREFORMED AHFZZ TUBE ASSY, LUBRICATI PAFZZ M83248/1-009 PACKING, PREFORMED PAFZZ M83248/1-265 PACKING, PREFORMED PAFZZ M83248/1-262 PACKING, PREFORMED PAFZZ GEARSHAFT, SPUR AHFDD GEAR ASSEMBLY, ACCES SEE FIGURE FOR BREAKDOWN PAFZZ TUBE, TRANSFER, OUTPU PAFZZ M83248/1-013 PACKING, PREFORMED PAFZZ M83248/1-266 PACKING, PREFORMED PAFZZ M83248/1-264 PACKING, PREFORMED AHFZZ MS BOLT, MACHINE PAOZZ STD3023K2 WASHER, KEY

26 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 36 AHFZZ STD BOLT, MACHINE AHFZZ SUPPORT ASSY PAFZZ SHIM IN THK... V 38 PAFZZ SHIM IN THK... V 38 PAFZZ SHIM IN THK... V 38 PAFZZ SHIM IN THK... V 38 PAFZZ SHIM IN THK... V 38 PAFZZ SHIM IN THK... V 39 PAFZZ BEARING, ROLLER, CYLI PAFZZ SEAL, PLAIN ENCASED PAFZZ MS BOLT, MACHINE PAFZZ SUPPORT-BRG, FR, PWR PAFZZ SHIM IN, IN LAMINATIONS.... V 44 PAFZZ BOLT, MACHINE PAOZZ AN960C10L WASHER, FLAT PAFFF VALVE ASSEMBLY, OIL PAFZZ MS PIN, COTTER PAFZZ M83248/1-008.PACKING, PREFORMED PAFZZ PLUG, VENT VALVE PAFZZ PISTON, VENT VALVE PAFZZ MS PIN, STRAIGHT, HEA XAFZZ BODY PAFZZ PACKING, PREFORMED PAFZZ SHIELD, OIL VENT PAFZZ CLAMP, LOOP PAFZZ TUBE ASSEMBLY, BREAT PAFZZ PACKING, PREFORME PAFZZ RUBBER ROUND SEC PADDD BAFFLE ASSEMBLY, HEA SEE FIGURE FOR BREAKDOWN PAFZZ SETSCREW PAFZZ ADAPTER, STRAIGHT, TU PAFZZ M83248/1-010 PACKING, PREFORMED PAFZZ STD NUT, SELF-LOCKING, EX PAFZZ AN960C516L WASHER, FLAT PAFZZ MS BOLT, MACHINE AHFFF FLANGE, TORQUEMETER PAFZZ MS INSERT, SCREW THR AHFZZ FLANGE PAFZZ M83248/1-226 PACKING, PREFORMED PAFZZ MS SCREW, MACHINE PAFDD PLUG ASSY, INLET HOU PAFZZ M83248/1-022 PACKING, PREFORMED PADZZ MS SCREW, DRIVE PADZZ STD3094 PLATE, IDENTIFICATIO PAOZZ ELBOW, HOSE PAOZZ M83248/1-012 PACKING, PREFORMED AHOZZ SENSOR, TEMP., TI PAOZZ MS BOLT, MACHINE PAOZZ AN960C1OL WASHER, FLAT

27 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 80 AHOZZ BASE PAOZZ GASKET PAFZZ MS BOLT, MACHINE PAFZZ AN960C416L WASHER, FLAT PAFZZ MS BOLT, MACHINE PAFZZ SPACER, SLEEVE 0.28 TO 0.38 IN DIM PAFZZ SPACER, SLEEVE 0.28 TO 0.44 IN DIM PAFZZ STD BOLT, MACHINE PAFZZ WASHER, FLAT PAFZZ MS PLUG, MACHINE THR PAFZZ STD3017E2 PACKING, PREFORMED PADDD INLET HOUSING ASSY SEE FIGURE FOR BREAKDOWN PAFZZ STD3019E78 PACKING, PREFORME PAFZZ MS BOLT, MACHINE PAFZZ W WASHER, FLAT PAFZZ STD NUT, SELF-LOCKING, EX PAFZZ MS BOLT PAFZZ MS BOLT, MACHINE PAFZZ SPACER, SLEEVE PAFZZ MS BOLT, MACHINE PAFZZ WASHER, FLAT PAFZZ STD BOLT, MACHINE PAFZZ MS BOLT, MACHINE PAFZZ AN960C416 WASHER, FLAT PAFZZ MS BOLT, MACHINE PAFZZ MS BOLT, MACHINE PAFZZ SPACER, SLEEVE PAFZZ ADAPTER ASSY, HOIST PAFZZ AN960C916L WASHER, FLAT AHFDD CASE AND STATOR, GAS SEE FIGURE FOR BREAKDOWN PAFZZ SPACER, COMPRESSOR H AHDDD ROTOR ASSY, COMPRESS SEE FIGURE FOR BREAKDOWN PAFZZ BOLT, MACHINE AHFDD DIFFUSER ASSY, AIR SEE FIGURE 12 FOR... 1 BREAKDOWN XDFZZ RING, RETAINING PAFZZ SEAL, PLAIN ENCASED AHOZZ SLEEVE SEAL REAR BR PAFZZ MS BOLT, MACHINE PAFZZ RETAINER ASSEMBLY, C PAFZZ COUPLING, OIL TRANSF XAFZZ STD PIN XAFZZ STD PIN XAFZZ RETAINER XAFZZ DISC PAFZZ MS GASKET PAFZZ MS GASKET

28 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 126 PAFZZ MS GASKET PAFZZ STD BOLT, MACHINE PAFZZ RING, BEARING, RETAIN PAFZZ BEARING, ROLLER, CYLI PAFZZ SHIM IN THK... V 131 PAFZZ SPACER, RING IN THK... V 131 PAFZZ SPACER, RING IN THK... V 131 PAFZZ SPACER, RING IN THK... V 132 PAFDD HOUSING, ANTIFRICTIO PADZZ SPACER, SLEEVE PADZZ SPACER, SLEEVE XADZZ STD PLUG XADZZ STD PLUG XADZZ HOUSING... 1 END OF FIGURE 2-4

29 SECTION II FIGURE 3. AIR LINES AND RELATED PARTS (SHEET 1 OF 2)

30 SECTION II FIGURE 3. AIR LINES AND RELATED PARTS (SHEET 2 OF 2)

31 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.3 AIR LINES AND RELATED PARTS 1 PAOZZ MS SCREW, MACHINE PAOZZ MS NUT, SELF-LOCKING, EX PAOZZ CLAMP, LOOP PAOZZ MS SCREW, MACHINE PAOZZ HOSE ASSEMBLY, NONME PAOZZ MS24392J3 NIPPLE, TUBE PAOZZ M83248/1-903 PACKING, PREFORMED AHOZZ FLEX TUBE ASSY AHOZZ BRACKET-TUBE ASSY AHOZZ HOSE ASSY AHOZZ TEE ASSY, METERING PAOZZ AN815-4J NIPPLE, BOSS PAOZZ M83248/1-904 PACKING, PREFORMED AHOZZ CLAMP ASSY AHOZZ CLAMP ASSY AHOZZ STRAP & SCREW ASSY AHOZZ STRAP & TAPE ASSY AHOZZ HOSE ASSEMBLY, NONME PAOZZ HOSE ASSEMBLY, NONME PAOZZ MS24392J6 NIPPLE, TUBE PAOZZ M83248/1-906 PACKING, PREFORMED PAOZZ MS BOLT, MACHINE PAOZZ MS21919WCJ13 CLAMP, LOOP PAOZZ NAS1057T3-044 SPACER, SLEEVE PAOZZ VALVE, CHECK PAOZZ AE HOSE ASSEMBLY, NONME PAOZZ AE HOSE ASSEMBLY, NONME PAOZZ HOSE ASSEMBLY, NONME PAOZZ MS24390J4 TEE, TUBE PAOZZ AN924-4K NUT, PLAIN, HEXAGON PAOZZ ACTUATOR TEE, AIR PR PAOZZ MS24396J4 ELBOW, TUBE PAOZZ MS24399J3 REDUCER, TUBE PAOZZ MS21919WCJ12 CLAMP, LOOP PAOZZ VALVE, CHECK PAOZZ AN939J4 ELBOW, BOSS PAOZZ MS24393J4 NIPPLE, TUBE PAOZZ AN938J4 TEE, BOSS PAOZZ AN833-4K ELBOW, TUBE PAOZZ MS CAP, TUBE... 1 END OF FIGURE 3-1

32 SECTION II FIGURE 4. INTERSTAGE AIR-BLEED ACTUATOR ASSEMBLY AND RELATED PARTS

33 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.4 INTERSTAGE AIR-BLEED ACTUATOR ASSEMBLY AND RELATED PARTS 1 PAOZZ BOLT, MACHINE PAODD ACTUATOR ASSY SEE FIGURE 5 FOR... 1 BREAKDOWN... END OF FIGURE 4-1

34 SECTION II FIGURE 5. INTERSTAGE AIR-BLEED ACTUATOR ASSEMBLY (SHEET 1 OF 2)

35 SECTION II FIGURE 5. INTERSTAGE AIR-BLEED ACTUATOR ASSEMBLY (SHEET 2 OF 2)

36 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.5 INTERSTAGE AIR-BLEED ACTUATOR ASSEMBLY PAODD ACTUATOR ASSY SEE FIGURE 4 FOR NHA... REF 1 PAOZZ NUT, PLAIN, HEXAGON PAOZZ MS PIN, COTTER PAOZZ PIN, SHOULDER, HEADLE PAOZZ YOKE, ACTUATOR, AIR PAOZZ BEARING, PLAIN, ROD E PAOZZ MS PIN, COTTER PAOZZ AN L WASHER, FLAT. WA PAOZZ PIN, STRAIGHT, HEADED PAOZZ MS PIN, COTTER PAOZZ STD3035S17 WASHER, FLAT PAOZZ PIN, STRAIGHT, HEADED PAOZZ PIN, STRAIGHT, HEADLE PADZZ MS BOLT, MACHINE PADZZ AN960C416L.WASHER, FLAT PADZZ SPRING, HELICAL, COMP PADDD PISTON ASSEMBLY, ACT XDDZZ MS PIN, COTTER PADZZ AN PIN, STRAIGHT, HEA XADZZ PISTON XADZZ PISTON ADAPTER PADZZ SEAL, ACTUATOR ASSEM PADZZ M25988/3-232.PAC KING, PREFORMED PAOZZ MS24399D13 REDUCER, TUBE PAOZZ M83248/1-908.PACKING, PREFORMED PAOZZ STRAINER ELEMENT, SE PAOZZ STRAINER ELEMENT, SE ALTERNATE TO... 1 P/N PAOZZ SPRING, HELICAL, COMP PADZZ BRACKET ASSEMBLY, AC PADZZ MS PIN, COTTER PADZZ PIN, STRAIGHT, HEADLE PAOZZ MS24392D4 NIPPLE, TUBE PAOZZ M83248/1-904.PACKING, PREFORMED PADZZ PLUG, MACHINE THREAD PADZZ SPRING, HELICAL, COMP PADZZ SLEEVE, INTERSTAGE PADZZ SHIM IN THK... V 35 PADZZ SHIM IN THK... V 35 PADZZ SHIM IN THK... V 36 PADZZ M83248/1-011.PACKING, PREFORMED PADZZ AN BOLT, MACHINE PADZZ MS NUT, SELF- LOCKING, EX PADZZ SEAT, HELICAL COMPRE PADZZ SPRING, HELICAL, COMP

37 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 41 PADZZ PLATE, WEAR, INTERSTA PADZZ MS NUT, SELF-LOCKING, EX PADZZ WASHER, SPRING TENSI PADZZ WASHER, RECESSED PADZZ RETAINER, DIAPHRAGM PADZZ DIAPHRAGM, ACTUATOR PADZZ SPACER, DIAPHRAGM PADZZ SPACER, DIAPHRAGM PADZZ WASHER, RECESSED PADZZ DIAPHRAGM, ACTUATOR PADZZ BUSHING, SLEEVE PADZZ M83248/1-008.PACKING, PREFORMED PADZZ VALVE, FEEDBACK CON PADZZ TUBE, TRANSFER, AIR, I PADZZ COVER, INTERSTAGE A PADZZ PIN, COTTER PADZZ PIN, HOLLOW PADZZ CONNECTING LINK, RIG PADZZ MS PIN, COTTER PADZZ MS C21.PIN, STRAIGHT, HEADED PADZZ SHIM PADZZ LEVER, INTERSTAGE A PADZZ ROLLER, LINEAR-ROTAR PADZZ LEVER, INTERSTAGE A PADZZ VALVE AND SLEEVE AS PADZZ M83248/1-013.PACKING, PREFORMED XDDZZ STD3019E14.PACKING, PREFORMED PADDD HOUSING, INTERSTAGE PADZZ RING, LOCK, KEYED PADZZ STUD, LOCKED IN PADZZ PLUG, METERING PADZZ RING, LOCK, KEYED XDDZZ INSERT PADZZ MS PIN, SPRING XADZZ HOUSING... 1 END OF FIGURE 5-2

38 SECTION II FIGURE 6. COMPRESSOR BLEED BAND AND RELATED PARTS

39 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG. 6 COMPRESSOR BLEED BAND AND RELATED PARTS 1 PAOZZ MS BOLT, MACHINE PAOZZ RETAINER, BLEED BAND PAOZZ BAND, COMPRESSOR BLE... 1 END OF FIGURE 6-1

40 SECTION II FIGURE 7. ANTI-ICING AIR GALLERY COVER AND RELATED PARTS

41 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.7 ANTI-ICING AIR GALLERY COVER AND RELATED PARTS 1 PAOZZ MS BOLT, MACHINE PAOZZ MS NUT, SELF-LOCKING, EX PAOZZ COVER, ANTI-ICING OA PAOZZ GASKET PAOZZ MS BOLT, MACHINE PAOZZ AN960C416L WASHER, FLAT PAOZZ STD NUT, SELF-LOCKING, EX PAOZZ MS NUT, SELF-LOCKING, EX PAOZZ COVER, ACCESS PAOZZ GASKET PAOZZ STD BOLT, MACHINE PAOZZ COVER, ANTI-ICING G AHOZZ GASKET PAOZZ NUT, TUBE COUPLING PAOZZ SPACER, RING PAOZZ RETAINER, PACKING PAOZZ CONNECTOR, AIR GALL PAOZZ PLATE, RETAINING, SEA PAOZZ PLATE, RETAINING SEA PAOZZ MANIFOLD, FLUID, AIRC... 1 END OF FIGURE 7-1

42 SECTION II FIGURE 8. COMPRESSOR HOUSING ASSEMBLY

43 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.8 COMPRESSOR HOUSING ASSEMBLY AHFDD CASE AND STATOR, GAS SEE FIGURE 2... REF FOR NHA... 1 PAOZZ STD BOLT, MACHINE PAOZZ D427.WASHER, FLAT... 3 PAOZZ MS BOLT, MACHINE PAOZZ MS BOLT, MACHINE PAOZZ MS BOLT, MACHINE PAOZZ MS BOLT, MACHINE PAOZZ SCREW, CAP, SOCKET HE PAOZZ CUP, LOCKING, COMPRES PAOZZ MS BOLT, MACHINE PAOZZ WASHER, FLAT... V 11 AHODD VANE ASSEMBLY, COMPR AHODD VANE ASSEMBLY, STATO AHODD VANE ASSEMBLY, STATO AHODD VANE ASSEMBLY, STATO ALTERNATE TO... 1 P/N AHODD VANE ASSEMBLY, STATO AHODD VANE ASSEMBLY, STATO ALTERNATE TO... 1 P/N AHODD VANE ASSEMBLY, STATO AHODD VANE ASSEMBLY, STATO AHODD VANE ASSEMBLY, STATO ALTERNATE TO... 1 P/N AHODD VANE ASSEMBLY, STATO AHFDD HOUSING & INSERT ASSY SEE FIGURE FOR BREAKDOWN... PAOZZ LTCT RTV CARTRIDGE KIT SEE GROUP 50 FOR COMPONENTS.... END OF FIGURE 8-1

44 SECTION II FIGURE 9. COMPRESSOR HOUSING AND INSERT ASSEMBLY

45 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.9 COMPRESSOR HOUSING AND INSERT ASSEMBLY AHFDD HOUSING & INSERT ASSY SEE FIGURE 8... REF FOR NHA... 1 PADZZ STD BOLT, MACHINE PADZZ D427.WASHER, FLAT... V 3 PADZZ STD BOLT, MACHINE PADZZ STD BOLT, MACHINE PADZZ STD BOLT, MACHINE PADZZ SCREW, CAP, SOCKET HE PADZZ CUP, LOCKING, COMPRES PADZZ SCREW, CAP, SOCKET H MDDZZ INSERT, COMPRESSOR, T 2ND STAGE, MAKE... 1 FROM AMS MDDZZ INSERT, COMPRESSOR, T 3RD STAGE, MAKE... 1 FROM AMS MDDZZ INSERT, COMPRESSOR, T 4TH STAGE, MAKE... 1 FROM AMS MDDZZ INSERT, COMPRESSOR H 5TH STAGE, MAKE... 1 FROM AMS MDDZZ INSERT, COMPRESSOR, T 6TH STAGE, MAKE... 1 FROM AMS MDDZZ INSERT, COMPRESSOR, T 7TH STAGE, MAKE... 1 FROM AMS PAFZZ DOWEL, HOLLOW PAFZZ MS INSERT, SCREW THREAD PAFZZ MS INSERT, SCREW THREAD PAFZZ MS INSERT, SCREW THREAD PAFZZ MS INSERT, SCREW THREAD PAFZZ MS INSERT, SCREW THREAD AHFZZ M45932/1-9L.INSERT, SCREW THREAD PAFZZ MS24693C48.SCREW, MACHINE XDDZZ MS INSERT, SCREW THREAD PADZZ MS PIN PADZZ INSERT, COMPRESSOR AHFDD HOUSING ASSY, COMPRE XAFDD HOUSING ASSY ALTERNATE TO P/N END OF FIGURE 9-1

46 SECTION II FIGURE 10. COMPRESSOR ROTOR ASSEMBLY (SHEET 1 OF 2)

47 SECTION II FIGURE 10. COMPRESSOR ROTOR ASSEMBLY (SHEET 2 OF 2)

48 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.10 COMPRESSOR ROTOR ASSEMBLY AHDDD ROTOR ASSY, COMPRESS SEE FIGURE 2... REF FOR NHA. 1 PADZZ NUT, PLA IN, ROUND PADZZ RING, LOCKING, PINION PADZZ GEAR, BEVEL PADZZ SHIM IN THK... V 4 PADZZ SHIM IN THK... V 4 PADZZ SHIM IN THK... V 4 PADZZ SHIM IN THK... V 4 PADZZ SHIM IN THK... V 4 PADZZ SPACER, RING IN THK... V 5 PADDD BEARING, BALL, ANNULA PADZZ HOUSING, ANTIFRICTIO PADZZ IMPELLER, OIL, COMPRE PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SPACER, RING IN THK... V 8 PADZZ SPACER, RING IN THK... V 9 PADZZ NUT, PLAIN, ROUND PADZZ WASHER, SPECIAL PADZZ NUT, PLAIN, ROUND PADZZ RETAINER, PACKING PADZZ SEAL, PLAIN ENCASED PADZZ M83248/1-048.PACKRING, PREFORMED ADDZZ HOUSING, ANTIFRICTIO PADZZ MS PIN, SPRING XADZZ HOUSING AHDDD DISC ASSY PAOZZ PIN, STRAIGHT, HEADLE PAOZZ SPRING, HELICAL, COMP PAOZZ BLADE, COMPRESSOR RO FOR FIELD REPLACEMENT, USE P/N PAOZZ BLADE SET, TURBING E FIELD REPLACEMENT 22 AHDZZ DISK, AXIAL COMPRESS ADDDD DISC ASSY ADDDD DISC ASSY ALTERNATE TO P/N PAOZZ PIN, STRAIGHT, HEADLE PAOZZ SPRING, HELICAL, COMP PAOZZ BLADE, COMPRESSOR RO FOR FIELD REPLACEMENT, USE P/N

49 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 26 PAOZZ BLADE SET, TURBING E FIELD REPLACEMENT PADZZ DISK, GAS TURBINE EN USED ON P/N PADZZ DISK, GAS TURBINE EN USED ON P/N AHDDD SPACER, COMPRESSOR R ADDDD DISC ASSY PAOZZ PIN, STRAIGHT, HEADLE PAOZZ SPRING, HELICAL, COMP PAOZZ BLADE, COMPRESSOR RO FOR FIELD REPLACEMENT, USE P/N PAOZZ BLADE SET, TURBING E FIELD REPLACEMENT PADZZ DISK, AXIAL COMPRESS AHDZZ SPACER, COMPRESSOR ADDDD DISC ASSY PAOZZ PIN, STRAIGHT, HEADLE PAOZZ SPRING, HELICAL, COMP PAOZZ BLADE, COMPRESSOR RO FOR FIELD REPLACEMENT, USE P/N PAOZZ BLADE SET, TURBING E FIELD REPLACEMENT PADZZ DISK, AXIAL COMPRESS AHDZZ SPACER, RING ADDDD DISC ASSY PAOZZ PIN, STRAIGHT, HEADLE PAOZZ SPRING, HELICAL, COMP PAOZZ BLADE, COMPRESSOR RO FOR FIELD REPLACEMENT, USE P/N PAOZZ BLADE SET, TURBING E FIELD REPLACEMENT 45 PADZZ DISK, AXIAL COMPRESS ADDDD DISC ASSY PAOZZ PIN, STRAIGHT, HEADLE PAOZZ SPRING, HELICAL, COMP PAOZZ BLADE, TURBINE ENGIN FOR FIELD REPLACEMENT, USE P/N PAOZZ BLADE SET, TURBING E FIELD REPLACEMENT 50 PADZZ DISK, AXIAL COMPRESS ADDDD DISC ASSY PAOZZ PIN, STRAIGHT, HEADLE PAOZZ SPRING, HELICAL, COMP PAOZZ BLADE, COMPRESSOR RO FOR FIELD REPLACEMENT, USE P/N PAOZZ BLADE SET, TURBING E FIELD REPLACEMENT PADZZ DISK, AXIAL COMPRESS AHDZZ SPACER, COMPRESSOR R

50 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 57 PADDD ROTOR, COMPRESSOR, GA SEE FIGURE FOR BREAKDOWN. 57 AHDDD ROTOR, COMPRESSOR, GA ALTERNATE TO... 1 P/N , SEE FIGURE 11 FOR BREAKDOWN AHDZZ SPACER, COMPRESSOR B PADZZ SPACER, COMPRESSOR B ALTERNATE TO... 1 P/N PADDD SHAFT, COMPRESSOR RO... 1 PADZZ A PARTS KIT, SEAL ASSY U/O END OF FIGURE 10-3

51 SECTION II FIGURE 11. IMPELLER ASSEMBLY

52 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.11 IMPELLER ASSEMBLY PADDD ROTOR, COMPRESSOR, GA SEE FIGURE REF FOR NHA. AHDDD ROTOR, COMPRESSOR, GA ALTERNATE TO... REF P/N , SEE FIGURE 10 FOR NHA 1 PADZZ SCREW, CAP, SOCKET HE PADZZ MS WASHER, LOCK XADZZ INDUCER USED ON P/N AHDZZ INDUCER USED ON P/N XADZZ IMPELLER USED ON P/N AHDZZ IMPELLER USED ON P/N END OF FIGURE 11-1

53 SECTION II FIGURE 12. AIR DIFUSER ASSEMBLY

54 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.12 AIR DIFFUSER ASSEMBLY AHFDD DIFFUSER ASSY, AIR SEE FIGURE 2 FOR... REF NHA. 1 PAOZZ MS BOLT, MACHINE PAOZZ MS NUT, SELF-LOCKING, EX PAOZZ MS21919WCJ4.CLAMP, LOOP IN DIA AHOZZ TUBE ASSY, DIFF TO PAOZZ AN SCREW, MACHINES AHOZZ BRACKET, FLAT, 2 HOLE PAOZZ STD3035C2.WASHER, FLAT AHOOO CONNECTOR ASSY SEE FIGURE 65 FOR... 1 BREAKDOWN. 9 PAOZZ M83248/1-014.PACKING, PREFORMED AHOZZ CONNECTOR, DIFFUSER AHOZZ STD GASKET, METAL, C SEAL AHOZZ AFLANGE, PIPE-DIFFUSE AHOZZ UNION-SCAV NO 2 BRG AHOZZ M83248/1-017.PACKING, PREFORMED AHFDD DIFFUSER ASSY AIR SEE FIGURE FOR BREAKDOWN. END OF FIGURE 12-1

55 SECTION II FIGURE 13. AIR DIFFUSER CASE ASSEMBLY

56 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.13 AIR DIFFUSER CASE ASSEMBLY AHFDD DIFFUSER ASSY AIR SEE FIGURE 12 FOR... REF NHA. 1 PADZZ AN RIVET, SOLID AHDZZ RETAINER, NUT AHDZZ NUT, PLAIN, HEXAGON AHDZZ VANE, OIL TRAN., AIR AHFZZ MS PIN, STRAIGHT, HEA PADZZ PLATE ASSY, OIL LINE PADZZ ADAPTER, OIL LINE TU PADZZ PLATE ASSY, OIL LINE... 1 END OF FIGURE 13-1

57 SECTION II FIGURE 14. OUTPUT SHAFT SEAL HOUSING ASSPMBLY

58 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.14 OUTPUT SHAFT SEAL HOUSING ASSEMBLY PAOFF HOUSING SEAL, ACCESS SEE FIGURE 2... REF FOR NHA. 1 PAOZZ MS RING, RETAINING PAOZZ SHIM IN, IN LAMINATIONS... V 3 PAOZZ SEAL, PLAIN ENCASED PAOZZ STD3019E49.PACKING, PREFORMED XAFZZ FLANGE, SEAL, OUTPUT... 1 END OF FIGURE 14-1

59 SECTION II FIGURE 15. OUTPUT SHAFT SUPPORT HOUSING ASSEMBLY (SHEET 1 OF 2)

60 SECTION II FIGURE 15. OUTPUT SHAFT SUPPORT HOUSING ASSEMBLY (SHEET 2 OF 2)

61 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG.15 OUTPUT SHAFT SUPPORT HOUSING ASSEMBLY PAFDD HOUSING ASSY SEE FIGURE 2 FOR NHA... REF 1 PAFZZ STD BOLT, MACHINE PAFZA MS NUT, PLAIN, HEXAGON PAFZZ MS CLAMP, LOOP PAFZZ BRACKET, TUBE SUPPOR PAFZZ TUBE ASSEMBLY, METAL PAFZZ MS24392J3.NIPPLE, TUBE PAFZZ M83248/1-011.PACKING, PREFORMED PAFZZ MS BOLT, MACHINE PAFDD GEAR ASSY, OVERSPEED PADZZ MS PIN, COTTER PADZZ NUT, PLAIN, SLOTTED, H PADZZ AN960C416L..WASHER, FLAT PADZZ GEARSHAFT, SPUR PADZZ KEY, WOODRUFF PADZZ BEARING, BALL, ANNULA PADZZ GEAR, BEVEL PADZZ MS RING, RETAINING PADZZ BEARING, BALL, ANNULA PADZZ SHIM IN THK... V 19 PADZZ SHIM IN THK... V 19 PADZZ SHIM IN THK... V 19 PADZZ SHIM IN THK... V 19 PADZZ SHIM IN THK... V 20 PADZZ SPACER, INNER BEVEL PADZZ MS NUT, PLAIN, ROUND PADZZ MS WASHER, KEY PADZZ BEARING, BALL, ANNULA PADZZ SPACER, SLEEVE PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... v 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 15-1

62 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 26 PADZZ GEAR, BEVEL 1 27 PADZZ HOUSING, MECHANICAL PAFZZ SEAL, PLAIN ENCASED PAFZZ MS SCREW, MACHINE PAFZZ LINER, BEARING HOUSI PAFZZ STD3019E156.PACKING, PREFORME PAFZZ M83248/1-153.PACKING, PREFORMED PAFZZ FILTER ELEMENT, OIL PAFZZ M83248/1-008.PACKING, PREFORMED PAFDD HOUSING ASSEMBLY, SH PADZZ NUT, SLEEVE PADZZ MS PLUG, PIPE PADZZ MS INSERT, SCREW THREAD PADZZ MS INSERT, SCREW THREAD PADZZ MS INSERT, SCREW THREAD PADZZ MS INSERT, SCREW THREAD MDDZZ STD PIN MAKE FROM PADZZ BUSHING, SLEEVE XADZZ HOUSING... 1 END OF FIGURE 15-2

63 SECTION II FIGURE 16. INLET HOUSING ASSEMBLY

64 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG. 16 INLET HOUSING ASSEMBLY PADDD INLET HOUSING ASSY SEE FIGURE 2 FOR REF NHA. 1 PAFZZ AN BOLT 1 2 PAFZZ AN960C416L.WASHER, FLAT 2 3 PAFZZ W WASHER, FLAT 1 4 PAFZZ MS C.SCREW, CAP, SOCKET HE 1 5 PAFZZ STD BOLT, MACHINE 1 6 PAFFF HOUSING ASSY, TRANSF 1 7 PAFZZ MS PLUG, MACHINE THREAD 1 8 PAFZZ M83248/ PACKING, PREFORMED 1 9 PAFZZ MS PLUG, MACHINE THREAD 1 10 PAFZZ M83248/ PACKING, PREFORMED 1 11 PADZZ HOUSING, BYPASS VALV 1 12 PADZZ M83248/ PACKING, PREFORMED 1 13 PADZZ SHIM O.030 IN, IN V LAMINATIONS 14 PADZZ SPRING, HELICAL, COMP 1 15 PADZZ B0-8SS..BEARING, BALL 1 16 PADZZ WASHER, RECESSED 1 17 PAFFF HOUSING, OIL FILLING 1 18 PAFZZ MS INSERT, SCREW THREAD 3 19 AHFZZ MS27769U2...PLUG, PIPE 1 20 PAFZZ PLUG, TRANSFER HOUSI 1 21 PAFZZ M83248/ PACKING, PREFORMED 1 22 XAFZZ HOUSING 1 23 PAFZZ M83248/1-015.PACKING, PREFORMED 3 24 PAFZZ M83248/1-013.PACKING, PREFORMED 1 25 PAFZZ M83248/1-019.PACKING, PREFORMED 1 26 PADZZ TUBE, FILLER AND BRE 1 27 PADZZ M83248/1-017.PACK RING, PREFORMED 28 PAFZZ MS27769M2.PLUG, PIPE 2 29 PAOZZ MS PLUG, MACHINE THREAD 2 30 PAOZZ M83248/1-904.PACKING, PREFORMED 2 31 PAFZZ BOLT, FLUID PASSAGE 2 32 PAFZZ WASHER, SHOULDERED A 2 33 PAFZZ M83248/1-031.PACK RING, PREFORMED 2 34 PAFZZ MS PLUG, MACHINE THREAD 1 35 PAFZZ M83248/1-906.PACK RING, PREFORMED 1 36 PADZZ MS RING, RETAINING 1 37 PADZZ STD3019E14 PACK RING, PREFORMED 1 38 PADZZ PLUG ASSEMBLY, HORIZ 1 39 PAOZZ MS24392J3.NIPPLE, TUBE 1 40 PAOZZ M83248/1-011.PACKING, PREFORMED 1 41 PAFZZ MS BOLT, MACHINE 2 42 PAFZZ AN L.WASHER, FLAT 4 43 PAFZZ STD NUT, SELF- LOCKING, EX

65 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 44 PAFZZ COVER, POWER TAKE-OF 1 45 PAFZZ M83248/1-010.PACKING, PREFORMED 1 46 PAFZZ M83248/1-226.PACKING, PREFORMED PAFDD HOUSING, INLET SEE FIGURE 17 FOR 1 BREAKDOWN. END OF FIGURE 16-2

66 SECTION II FIGURE 17. INLET HOUSING STUD AND INSERT ASSEMBLY

67 SECTION II TM P C1 (1) ITEM NO (2) SMR CODE (3) CAGE (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0402: COMPRESSOR SECTION (6) QTY 1 2 PAFDD PAFZZ PADZZ MS FIG. 17 INLET HOUSING STUD AND INSERT ASSEMBLY HOUSING, INLET SEE FIGURE 16 FOR NHA. INSERT, SCREW THREAD PIN, STRAIGHT, HEADLESS PADZZ INSERT, MOUNTING PAD PADZZ M83248/ PACKING, PREFORMED PAOZZ MS INSERT, SCREW THR PADZZ AN PIN, STRAIGHT, HEADLESS PAFZZ SPACER, SLEEVE PAFZZ MS INSERT, SCREW THREAD PAOZZ PADZZ MS INSERT, SCREW THREAD RING, RETAINING PADZZ PIN, GROOVED, HEADLESS XDFZZ STD3009B5N. STUD, PLAIN IN OVERSIZE XDFZZ STD3009B5P. STUD, PLAIN IN OVERSIZE PAFZZ STD3009B5R. STUD, PLAIN IN OVERSIZE XDFZZ STD3045B2N. STUD, PLAIN IN OVERSIZE PAFZZ STD3045B2P. STUD, PLAIN IN OVERSIZE PAFZZ STD3045B2R. STUD, PLAIN IN OVERSIZE PAFZZ STD3009B4N. STUD, PLAIN IN OVERSIZE XDFZZ STD3009B4P. STUD, PLAIN IN OVERSIZE PAFZZ STD3009B4R. STUD, PLAIN IN OVERSIZE PAFZZ MS INSERT, SCREW THREAD PAFZZ MS INSERT, SCREW THREAD PAFZZ MS INSERT, SCREW THREAD PADZZ AN PIN, STRAIGHT, HEADLESS PAFZZ INSERT, DOWEL PIN PADZZ PIN, STRAIGHT, HEA PADZZ AN STUD, STEPPED PADZZ PLUG, INLET HOUSING AHFZZ MS INSERT, SCREW THREAD PADZZ INSERT, INLET HOUSING PADZZ M83248/ PACKING, PREFORMED PADZZ MS27769M8. PLUG, PIPE PADZZ DISK, SOLID, PLAIN AHDZZ AN932M2. PLUG, PIPE XADDD HOUSING, INLET REF

68 SECTION II FIGURE 18. BAFFLE ASSEMBLY

69 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0402: COMPRESSOR SECTION FIG. 18 BAFFLE ASSEMBLY PADDD BAFFLE ASSEMBLY, HEA SEE FIGURE 2 REF FOR NHA. 1 PADZZ MS RING, RETAINING 1 2 PADZZ SEAL, PLAIN ENCASED 1 3 PADZZ MS20426A4-9 RIVET, SOLID 4 4 PADZZ SUPPORT, SHAFT, OIL L 1 5 PADZZ M83248/1-123.PACKING, PREFORMED 1 6 PADZZ *RIVET, SOLID 2 7 PADZZ MS20426A4-10 *RIVET, SOLID 4 8 PADZZ *SUPPORT, BREATHER TU 1 9 PADZZ MS20426A4-8 RIVET, SOLID PADZZ DEFLECTOR, HEAT EXCH 1 11 PADZZ SPACER, SLEEVE XADZZ BAFFLE. 1 END OF FIGURE 18-1

70 SECTION II FIGURE 19. COMBUSTION SECTION COMPONENTS

71 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0403: COMBUSTION SECTION FIG. 19 COMBUSTION SECTION COMPONENTS 1 PAOZZ STD BOLT, MACHINE 52 2 PAOZZ STD3023K2 WASHER, KEY AHOZZ M83413/8-G13BC JUMPER CABLE ASSY 1 4 AHFDD 9l CHAMBER ASSY, ATOMIZ SEE FIGURE 20 1 FOR BREAKDOWN. END OF FIGURE 19-1

72 SECTION II FIGURE 20. COMBUSTOR ASSEMBLY

73 SECTION II TM P C1 (1) ITEM NO (2) SMR CODE (3) CAGE (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0403: COMBUSTION SECTION (6) QTY FIG. 20 COMBUSTOR ASSEMBLY AHFDD CHAMBER ASSY, ATOMIZ SEE FIGURE 19 REF FOR NHA PAFZZ BOLT, MACHINE PAFFF VANE, ASSEMBLY STATO PAFZZ BOSS, COMBUSTOR GUIDE PAFZZ SETSCREW PAFZZ MS WASHER, KEY 4 6 AHFDD LINER, COMBUSTION CH SEE FIGURE FOR BREAKDOWN 7 PAOZZ MS SCREW, MACHINE PAOZZ PLATE, PROBE, DIFFUSE PAOZZ GASKET PAOZZ BOLT, MACHINE PAODD VALVE, DRAIN, FUEL SYS SEE FIGURE FOR BREAKDOWN 12 PAOZZ GASKET, NON ASBESTOS PAFZZ MS24693C268. SCREW, MACHINE PAFZZ RING, RETAINING PAFDD HOUSINIG, ATOMIZING C SEE FIGURE FOR BREAKDOWN END OF FIGURE 20 1

74 SECTION II FIGURE 21. COMBUSTION CHAMBER DRAIN VALVE ASSEMBLY

75 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0403: COMBUSTION SECTION FIG. 21 COMBUSTION CHAMBER DRAIN VALVE ASSEMBLY PAODD VALVE, DRAIN, FUEL SY SEE FIGURE 20 REF FOR NHA. 1 PADZZ PIN, STRAIGHT, HEA 2 2 PADZZ PLATE, DRAIN VALVE, C 1 3 PADZZ SPRING, HELICAL, COMP 1 4 XADZZ BODY, DRAIN VALVE 1 END OF FIGURE 21-1

76 SECTION II FIGURE 22. COMBUSTION CHAMBER LINER ASSEMBLY

77 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0403: COMBUSTION SECTION FIG. 22 COMBUSTION CHAMBER LINER ASSEMBLY AHFDD LINER, COMBUSTION CH SEE FIGURE 20 REF FOR NHA. 1 XDFZZ RING 28 2 PAFZZ SEAT, HELICAL COMPRE 28 3 PAFZZ SPRING, HELICAL, COMP 28 4 PAFZZ SWIRLER, COMBUSTOR 28 4 AHFZZ SWIRLER, COMBUSTOR ALTERNATE TO P/N PADZZ SUPPORT, COMBUSTION 4 6 PADZZ BUSHING, SLEEVE 4 7 PADZZ SEAL ASSY, PLUG 4 8 XADZZ CUP, SEAL, SPARK PLUG 1 9 XADZZ SEAL, SPARK PLUG 1 10 PAFZZ GUIDE, LINER, COMBUST 2 END OF FIGURE 22-1

78 SECTION II FIGURE 23. COMBUSTOR HOUSING ASSEMBLY

79 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0403: COMBUSTION SECTION FIG.23 COMBUSTOR HOUSING ASSEMBLY PAFDD HOUSING, ATOMIZING C SEE FIGURE 20 REF FOR NHA. 1 PADZZ BOSS, MOUNTING, COMBU 4 2 PADZZ IGNITER, SPARK, GAS T 4 3 PADZA MS NUT, SELF- LOCKING, PL 8 4 PADZZ BOSS, DRAIN VALVE 2 END OF FIGURE 23-1

80 SECTION II FIGURE 24. TURBINE SECTION COMPONENTS (SHEET 1 OF 3)

81 SECTION II FIGURE 24. TURBINE SECTION COMPONENTS (SHEET 2 OF 3)

82 SECTION II FIGURE 24. TURBINE SECTION COMPONENTS (SHEET 3 OF 3)

83 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG.24 TURBINE SECTION COMPONENTS 1 AHOFF KIT, TAILPIPE 1 2 AHOZZ COUPLING 1 3 AHOZZ BOLT, TAILPIPE 6 4 PAOZZ SPACER, SLEEVE 6 5 AHOFF TAILPIPE ASSY SEE FIGURE 32 FOR 1 BREAKDOWN. 6 PAOZZ STD BOLT, MACHINE 28 7 PAOZZ STD NUT, SELF-LOCKING, EX 28 8 PAODD FIRESHIELD ASSEMBLY 1 9 PADDD FIRESHIELD SECTION 1 10 PADDD BRACKET ASSEMBLY, BU PADZZ AN RIVET, SOLID 2 12 PADZA MS NUT, SELF-LOCKING, PL 1 13 XADZZ BRACKET 1 14 PAOZZ REDUCER, TUBE 1 15 PAOZZ SPRING, FLAT 2 16 PAOZZ SHIM IN THK. V 16 PAOZZ SHIM O IN THK V 17 PAOZZ REDUCER, TUBE 1 18 PAOZZ FIRESHIELD SECTION 1 19 PAFZZ STD BOLT, MACHINE AHFDD TURBINE ASSY, POWER SEE FIGURES 25 1 AND 58 FOR BREAKDOWN. 21 PAFZZ SEAL RING, METAL 4 22 PAFZZ SPRING, FLAT 4 23 PAFZZ SHIM IN THK V 23 PAFZZ SPACER, PLATE IN THK V 23 PAFZZ SPACER, RING IN THK V 24 PAFZZ BOLT, EXTERNALLY REL 6 25 PAFZZ LOCKING PLATE, NUT A 3 26 AHFZZ SEAL, TURBINE DISK 1 27 AHDDD TURBINE ROTOR, TURBI SEE FIGURE 30 1 FOR BREAKDOWN. 28 PAFZZ NUT, PLAIN, ROUND 1 29 PAFZZ WASHER, RETAINING 1 30 AHFZZ SPACER, TURBINE, GAS 1 31 PADZZ STD BOLT, MACHINE AHFDD BUMPER, 2ND TURB NOZ 1 33 AHFDD NOZZLE ASSY, 2ND ST 1 34 PAFFD CYLINDER ASSEMBLY 1 35 AHDDD TURBINE ROTOR, TURBI SEE FIGURE 31 1 FOR BREAKDOWN. 36 AHFDD DISC ASSY, 1ST, 2ND FIELD REPLACEMENT 1 SET. 37 PAFZZ BOLT, EXTERNALLY REL 6 38 PAFZZ LOCKING PLATE, NUT A

84 SECTION II TM P C1 (1) ITEM NO (2) SMR CODE (3) CAGE (4) PART NUMBER (5) DESCRIPTION AND USABLE ON CODE (UOC) (6) QTY 39 AHFZZ SEAL, TURBINE DISK AHDDD TURBINE ROTOR, TURBI AHFZZ SPACER, TURBINE, GAS AHDDD TURBINE ROTOR, TURBI PAFZZ BOLT, MACHINE XDFZZ STD BOLT, MACHINE PAFZZ RETAINER SLEEVE, SEA AHFZZ STD BOLT, MACHINE AHFZZ RETAINER, BAFFLE AHFZZ BAFFLE, AIR PAFZZ RING, SEAL PAFDD NOZZ 1ST TURB SEG, A AHFZZ SCREW AHFZZ *SUPPORT ASSY AHFDD *SUPPORT ASSY AHDZZ PIN, SPRING AHFZZ *SEAL STRIP AHFZZ SEAL STRIP AHFDD R44.NOZZLE ASSY AHFZZ CURL ASSY, DIFFUSER END OF FIGURE 24 2

85 SECTION II FIGURE 25. POWER TURBINE ASSEMBLY (SHEET 1 OF 2)

86 SECTION II FIGURE 25. POWER TURBINE ASSEMBLY (SHEET 2 OF 2)

87 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG.25 POWER TURBINE ASSEMBLY AHFDD TURBINE ASSY, POWER SEE FIGURE 24 REF FOR NHA. 1 PAFZZ STD BOLT, MACHINE 31 2 PAFZZ STD BOLT, MACHINE 5 3 AHFZZ SUPPORT, 3RD TURB NO 1 4 PAFDD NOZZLE, TURBINE, TURB SEE FIGURE 26 1 FOR BREAKDOWN. 5 AHDDD NOZZLE ASSY, TURBINE SEE FIGURE 28 1 FOR BREAKDOWN. 6 PAFZZ NUT, RETAINING, TURBI 1 7 PAFZZ CUP, LOCKING, DISK RE 1 8 ADDDD DISC ASSY, 4TH SEE FIGURE 27 FOR 1 BREAKDOWN. 9 PAFZZ STD BOLT, MACHINE AHFZZ SCREW, MACHINE PAFZZ SHIELD, HEAT, TURBINE 1 12 AHFZZ SHIM IN THK V 12 AHFZZ SHIM IN THK V 12 AHFZZ SHIM IN THK V 13 PAFZZ MS SCREW, MACHINE 6 14 PAFZZ RETAINER, OIL SEAL 1 15 PAFZZ SEAL, SPECIAL 1 15 AHFZZ GASKET RING ALTERNATE TO P/N PAFZZ SEAL AS SEMBLY PADZZ SPACER, RING 1 18 PAFZZ ADAPTER, LUBE, BEARIN 1 19 PAFZZ TUBE ASSEMBLY, METAL 2 20 PAFZZ ADAPTER 1 21 PAFZZ ADAPTER, BEARING SCA 1 22 PAFZZ ADAPTER ASSEMBLY, PI PAFZZ RING, RETAINING 2 24 PADZZ STD BOLT, MACHINE PAFZZ STD BOLT, MACHINE PADZZ SHIELD, HEAT, TURBINE 1 27 PAFZZ RETAINER, OIL SEAL 1 28 AHFZZ BOLT, MACHINE PADZZ RING, BEARING RETAIN 1 30 PADZZ SHIM IN THK V 30 PADZZ SHIM IN THK V 30 PADZZ SHIM IN THK V 30 PADZZ SPACER, RING IN THK. V 31 PAFZA MS GASKET 1 32 PADDD BEARING, BALL, DUPLEX 1 33 PADZZ TUBE, TRANSFER, OIL J PADZZ HOUSING, ANTIFRICTIO

88 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 35 ADDDD SHAFT ASSY, INTEGRAL SEE FIGURE 29 1 FOR BREAKDOWN. END OF FIGURE 25-2

89 SECTION II FIGURE 26. THIRD TURBINE NOZZLE ASSE14BLY

90 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG.26 THIRD TURBINE NOZZLE ASSEMBLY PAFDD NOZZLE, TURBINE, TURB SEE FIGURE 25 REF FOR NHA. 1 PADZZ AN RIVET, SOLID 16 2 PADZZ SEAL, TURBINE NOZZLE 1 3 PADZZ SEAL, NOZZLE, TURBINE 1 4 PADZZ SEAL, NOZZLE, TURBINE 1 5 PADZZ SEAL, NOZZLE, TURBINE 1 6 PADZZ BOSS, THIRD TURBINE 10 7 PADZZ SUPPORT, SHROUD ASSY 1 8 PADZZ VANE, TURBINE ENGINE 61 9 XADZZ SHROUD, OUTER 1 END OF FIGURE 26-1

91 SECTION II FIGURE 27. FOURTH TURBINE ROTOR ASSEMBLY

92 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG. 27 FOURTH TURBINE ROTOR ASSEMBLY ADDDD DISC ASSY, 4TH SEE FIGURE 25 FOR NHA REF 1 PADZZ PIN, STRAIGHT, HEADED IN OVERSIZE. 1 PADZZ PIN, STRAIGHT, HEADED IN OVERSIZE. 1 PADZZ PIN, STRAIGHT, HEADED IN OVERSIZE. 1 PADZZ PIN, STRAIGHT, HEADED IN OVERSIZE. 2 PADZZ BLADE, TURBINE ENGIN 60 3 PADZZ DISK AND HUB, TURBIN 1 END OF FIGURE 27-1

93 SECTION II FIGURE 28. FOURTH TURBINE NOZZLE ASSEMBLY

94 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG.28 FOURTH TURBINE NOZZLE ASSEMBLY AHDDD NOZZLE ASSY, TURBINE SEE FIGURE 25 REF FOR NHA. 1 ADDDD NOZZLE, TURBINE, TURB 1 2 PADZZ AN RIVET, SOLID PADZZ RETAINER, NUT AND PADZZ NUT, PLAIN, HEXAGON 22 5 PADZZ BOLT, MACHINE 16 6 PADZZ BOLT, MACHINE 16 7 PADZZ PLATE, NOZZLE SUPPO 16 8 XADZZ VANE, TURBINE ENGINE. 21 END OF FIGURE 28-1

95 SECTION II TM P FIGURE 29. THIRD TURBINE ROTOR ASSEMBLY

96 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG.29 THIRD TURBINE ROTOR ASSEMBLY ADDDD SHAFT ASSY, INTEGRAL SEE FIGURE 25 REF FOR NHA. 1 PADZZ PIN, STRAIGHT, HEADED IN OVERSIZE. 1 PADZZ PIN, STRAIGHT, HEADED IN OVERSIZE. 1 PADZZ PIN, SHOULDER, HEADLE IN OVERSIZE. 2 PADZZ BLADE, TURBINE ENGIN 64 3 PADDD SHAFT, TURBINE, TURBI 1 END OF FIGURE 29-1

97 SECTION II FIGURE 30. SECOND TURBINE ROTOR ASSEMBLY

98 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG.30 SECOND TURBINE ROTOR ASSEMBLY AHDDD TURBINE ROTOR, TURBI SEE FIGURE 24 REF FOR NHA. 1 PADZZ PIN, HOLLOW 72 2 PADZZ BLADE, TURBINE ENGIN FOR FIELD 36 REPLACEMENT, USE P/N AHDZZ BLADE, TURBINE ENGIN FIELD 36 REPLACEMENT. 3 PADZZ BLADE, TURBINE ENGIN FOR FIELD 36 REPLACEMENT, USE P/N AHDZZ BLADE, TURBINE ENGIN FIELD 36 REPLACEMENT. 4 PADZZ SEALING PLATE, BASE PADZZ STD3033S3.RING, RETAINING 3 6 PADZZ PIN, GROOVED, HEADLES 3 7 AHDZZ DISK, GAS TURBINE EN 1 END OF FIGURE 30-1

99 SECTION II FIGURE 31. FIRST TURBINE ROTOR ASSEMBLY

100 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG.31 FIRST TURBINE ROTOR ASSEMBLY AHDDD TURBINE ROTOR, TURBI SEE FIGURE 24 REF FOR NA.. 1 PADZZ PIN, HOLLOW 3 2 AHDZZ PLATE, SEALING, GAS P 1 3 PADZZ RING, RETAINING 1 4 AHDZZ BLADE, TURBINE ENGIN 40 5 AHDZZ BLADE, TURBINE ENGIN 40 6 AHDZZ DISK, TURBINE, TURBIN 1 END OF FIGURE 31-1

101 SECTION II FIGURE 32. TAILPIPE ASSEMBLY

102 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0404: TURBINE SECTION FIG. 32 TAILPIPE ASSEMBLY AHOFF TAILPIPE ASSY SEE FIGURE 24 FOR NHA REF 1 AHOFF NUT, SELF LOCK AND D 8 2 AHOFF SPACER. 8 3 AHOFF DISK SPRING 16 4 AHOFF ROD, SUPPORT 2 5 AHOFF ROD, SUPPORT 2 6 AHOFF CENTERBODY ASSY 1 7 AHOFF TAILCONE ASSY 1 END OF FIGURE 32-1

103 SECTION II FIGURE 33. ACCESSORY GEAR SECTION COMPONENTS

104 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 33 ACCESSORY GEAR SECTION COMPONENTS 1 PAOZZ MS SCREW, MACHINE PAOZZ MS NUT, SELF-LOCKING, EX PAOZZ CLAMP, LOOP IN DIA PAOZZ TUBE ASSEMBLY, OIL T PAOZZ M83248/1-016 PACKING, PREFORMED PAOZZ BRACKET, OIL TUBE PAOZZ SCREW, CAP, SOCKET HE PAOZZ WASHER, FLAT PAOZZ GEARSHAFT, SPUR PAOZZ MS BOLT, MACHINE PAOZZ STD3018K11 WASHER, KEY PAOFF COVER ASSEMBLY, OVER SEE FIGURE FOR BREAKDOWN PAOZZ M83248/1-140 PACKING, PREFORMED PAOZZ MS BOLT, MACHINE PAOZZ MS WASHER, FLAT PAOZZ MS BOLT, MACHINE PAOZZ MS BOLT, MACHINE PAOZZ AN960C516L WASHER, FLAT PAOZZ M83248/1-228 PACKING, PREFORMED PAOZZ M83248/1-216 PACKING, PREFORMED PAOZZ M83248/1-115 PACKING, PREFORMED PAOZZ M83248/1-022 PACKING, PREFORMED PAOZZ PLUG, OIL PASSAGE PAOZZ M83248/1-018 PACKING, PREFORMED AHODD GEARBOX, ACCESSORY D SEE FIGURE FOR BREAKDOWN. END OF FIGURE 33-1

105 SECTION II FIGURE 34. ACCESSORY DRIVE GEARBOX ASSEMBLY

106 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG.34 ACCESSORY DRIVE GEARBOX ASSEMBLY AHODD GEARBOX, ACCESSORY D SEE FIGURE REF FOR NHA 1 PADZZ STD NUT, SELF-LOCKING, EX PADZZ MS21042L4.NUT, SELF-LOCKING, EX ALTERNATE TO P/N STD PADZZ AN960C416L.WASHER, FLAT PADZZ MS BOLT, MACHINE PADZZ STD3023K2 WASHER, KEY. W AHDDD COVER AND SUPPORT, A SEE FIGURE FOR BREAKDOWN. 6 PADZZ GASKET PADZZ PACKING WITH RET AHDDD HOUSING, GEARBOX, TUR SEE FIGURE AND 63 FOR BREAKDOWN. END OF FIGURE 34-1

107 SECTION II FIGURE 35. ACCESSORY DRIVE GEARBOX COVER ASSEMBLY

108 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 35 ACCESSORY DRIVE GEARBOX COVER ASSEMBLY AHDDD COVER AND SUPPORT, A SEE FIGURE REF FOR NHA. 1 ADDDD GEAR ASSEMBLY, ACCES AHDZZ BEARING, BALL, ANNULA PADZZ NUT, PLAIN, ROUND PADZZ WASHER, KEY PADZZ GEAR, SPUR PADZZ WASHER, CONVEX PADZZ BEARING, BALL, ANNULA PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 8 PADZZ SHIM IN THK... V 9 PADZZ GEAR, BEVEL AHDZZ BEARING, BALL, ANNULA AHDZZ GEAR, SPUR-PWR CONT PAFZZ SEAL, PLAIN ENCASED PADZZ STD BOLT, MACHINE. BN PADZZ STD3023K1 WASHER, KEY. W PADZZ LINER, PWR CT RL, AGB PADZZ M83248/1-223.PACK RING, PREFORMED PADZZ RING, RETAINING.R PADZZ BEARING, BALL, ANNULA PADZZ GEAR, SPUR. G PADZZ STD BOLT, MACHINE. B PADZZ LINER, REAR BRG AGB PADZZ M83248/1-222.PACK RING, PREFORMED PADZZ M83248/1-021.PACK RING, PREFORMED PADZZ BEARING, BALL, ANNULA PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 25 PADZZ SHIM IN THK... V 26 AHDZZ GEAR ASSY, OVRSPD DR PADZZ SEAL, PLAIN ENCASED PADZZ M83248/1-028.PACKING, PREFORMED PADZZ PACKING WITH RET

109 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 30 PADDD COVER ASSEMBLY, GEAR SEE FIGURE FOR BREAKDOWN... END OF FIGURE 35-2

110 SECTION II FIGURE 36. ACCESSORY DRIVE GEARBOX SUPPORT ASSEMBLY

111 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 36 ACCESSORY DRIVE GEARBOX SUPPORT ASSEMBLY PADDD COVER ASSEMBLY, GEAR SEE FIGURE REF FOR NA.. 1 PADZZ SCREW, CAP, SOCKET HE PADZZ SCREW, CAP, SOCKET HE PADZZ SCREW, CAP, SOCKET HE XADZZ SUPPORT, DRIVE BEARI PADZZ PLATE, ACCESSORY BEA PADZZ STD PIN, STRAIGHT, HEAP PADZZ WASHER, RECESSED PADZZ WASHER, RECESSED PADZZ LINER, BEARING HOUSI PADZZ MS INSERT, SCREW TH READ PADZZ MS INSERT, SCREW TH READ PADZZ SCREW, SET PADZZ MS INSERT, SCREW TH READ PADZZ STD3007B8N.STUD, STEPPED THD OVERSIZE. 14 PADZZ STD3007B8P.STUD, STEPPED THD OVERSIZE. 14 PADZZ STD3007B8R.STUD, STEPPED THD OVERSIZE. 15 XDDZZ AN STUD, STEPPED PADZZ MS PIN, SPRING XADZZ COVER END OF FIGURE 36-1

112 SECTION II FIGURE 37. ACCESSORY DRIVE GEARBOX CASE ASSEMBLY (SHEET 1 OF 3)

113 SECTION II FIGURE 37. ACCESSORY DRIVE GEARBOX CASE ASSEMBLY (SHEET 2 OF 3)

114 SECTION II FIGURE 37. ACCESSORY DRIVE GEARBOX CASE ASSEMBLY (SHEET 3 OF 3)

115 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 37 ACCESSORY DRIVE GEARBOX CASE ASSEMBLY AHDDD HOUSING, GEARBOX, TUR SEE FIGURE REF FOR NHA. 1 PAOZZ STD NUT, SELF-LOCKING, EX PAOZZ AN L WASHER, FLAT PAOOO COLLECTOR ASSY, ACCE PAOZZ MS24392K8..NIPPLE, BOSS PAOZZ M83248/ PACKING, PREFORMED PAOZZ MS24392K10..NIPPLE, BOSS PAOZZ MS PACKING, PREFORME XAOZZ COLLECTOR PAOZZ GASKET PAFZZ MS NUT, SELF-LOCKING, EX AHFZZ SPACER AHFDD COVER AHFZZ M83248/1-033.PACKING, PREFORMED AHFFF DRIVE ASSY, SPD PKUP PAOZZ STD BOLT, MACHINE AHOZZ SPEED PICKUP PAOZZ M83248/ PACKING, PREFORMED AHOZZ STD3000E30.PAC KING, PREFORMED PAOZZ ADAPTER, STRAIGHT, TU PAOZZ M83248/1-905.PACKING, PREFORMED PAFZZ MS RING, RETAINING PAFZZ VALVE, SAFETY RELIEF PADZZ COVER, FUEL FILTER D AHDZZ BEARING, BALL, ANNULA PADDD GEAR, SPUR PADZZ PLUG, PUMP DRIVE GEA XADZZ 91S GEAR PADZZ SEGMENT ASS EMBLY, FU PADZZ COVER, DRIVE GEAR, FU PADZZ STD SCREW, CAP, SOCKET HE PADZZ MS CLAMP, LOOP PADZZ TUBE ASSEMBLY, ACCES PADZZ STD SCREW, CAP, SOCKET HE PADZZ COVER ASS EMBLY, FILT PADZZ BEARING, BALL, ANNULA PAOZZ MS BOLT, MACHINE PAOZZ SPACER, SLEEVE PAOZZ MS BOLT, MACHINE PAOZZ AN960C10L.WASHER, FLAT PAOZZ HOUSING, OIL PUMP, TU PAOZZ M83248/1-038.PACKING, PREFORMED PAOZZ PLUG, SCAVENGE PUMP PAOZZ LOCKING PLATE, SCAVE

116 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 44 PADZZ SHIM IN THK... V 44 PADZZ SHIM IN THK... V 44 PADZZ SHIM IN THK... V 44 PADZZ SHIM IN THK... V 45 PAOZZ STD3019E14.PACKING, PREFORMED PADZZ SPACER, RING IN THK... V 46 PADZZ SPACER, RING IN THK... V 46 PADZZ SHIM IN THK... V 46 PADZZ SHIM IN THK... V 46 PADZZ O5.SHIM IN THK... V 46 PADZZ SHIM IN THK... V 47 PADZZ SPACER, STEPPED PADZZ MS24693S201 SCREW, MACHINE PADZZ HOUSING, OIL PUMP, TU PADZZ M83248/1-040.PACK ING, PREFORKED PADZZ IMPELLER, OIL SCAVEN PADZZ HOUSING, ANT IFRICTIO PADZZ SETSCREW PADZZ STD3023K1 WASHER, KEY PADZZ BEARING, BALL, ANNULA PADZZ GEARSHAFT, BEVEL PADDD LINER AND BEARING A PADZZ BEARING, BALL, ANNULA XADZZ LINER PADZZ MS PIN, COTTER PADZZ NUT, PLAIN, EXTENDED PADZZ BOLT, MACHINE PADZZ WASHER, FLAT PADZZ BOLT, MACHINE PADZZ COVER, OVERSPEED PADZZ SHIM IN THK... V 66 PADZZ SHIM IN THK... V 66 PADZZ SHIM IN THK... V 66 PADZZ SHIM IN THK... V 66 PADZZ SHIM IN THK... V 66 PADZZ SHIM IN THK... V 66 PADZZ SHIM IN THK... V 67 PADZZ ADAPTER, GEAR TO CAS PADZZ GEAR, SPUR PADZZ ADAPTER, IDLER CLUST PADDD GEAR CLUSTER PADZZ BEARING, BALL, ANNULA XADZZ SPACER XADZZ SPACER XADZZ GEAR PADZZ NUT, PLAIN, SLOTTED, H PADZZ WASHER, FLAT PADZZ GEAR, BEVEL PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 37-2

117 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 78 PADZZ SHIM IN THK... V 79 PADZZ PACKING, PREFORMED PADZZ WASHER, FLAT PADDD LINER ASSEMBLY, OVER PADZZ BEARING, BALL, ANNULA XADZZ SPACER XADZZ SEAL, PLAIN, ENCASED XADZZ LINER XDDZZ STD KEY, WOODRUFF PADZZ GEAR, SPUR PADZZ M83248/1-216.PACKING, PREFORMED AHDDD HOUSING, GEARBOX, TUR SEE FIGURE FOR BREAKDOWN. END OF FIGURE 37-3

118 SECTION II FIGURE 38. ACCESSORY GEARBOX CASE AND STUDDING ASSEMBLY

119 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 38 ACCESSORY GEARBOX CASE AND STUDDING ASSEMBLY AHDDD HOUSING, GEARBOX, TUR SEE FIGURE REF FOR NHA. 1 PADZZ AN PIN, STRAIGHT, HEA PADZZ MS INSERT, SCREW TH PADZZ AN932D2 PLUG, PIPE PADZZ MS INSERT, SCREW TH READ AHDZZ STD3001B23N.STUD, STEPPED THD OVERSIZE. 5 AHDZZ STD3001lB23P.STUD, STEPPED THD OVERSIZE. 5 AHDZZ STD3001B23R.STUD, STEPPED THD OVERSIZE. 6 XDDZZ STD3001B4N *STUD, STEPPED THD OVERSIZE. 6 XDDZZ STD3001B4P.STUD, STEPPED THD OVERSIZE. 6 XDDZZ STD3001B4R.STUD, STEPPED THD OVERSIZE. 7 XDDZZ AN932D3.PLUG PADZZ MS INSERT, SCREW THR PADZZ MS INSERT, SCREW THREAD XDDZZ AN PIN, STRA IGHT, HEA XDDZZ STD3001B12N.STUD, STEPPED THD OVERSIZE. 11 XDDZZ STD3001B12P.STUD, STEPPED THD OVERSIZE. 11 XDDZZ STD3001B12R.STUD, STEPPED THD OVERSIZE. 12 PADZZ MS INSERT, SCREW THREAD XDDZZ AN STUD, STEPPED XADDD CASE ASSY XDDZZ STD PIN, STRAIGHT, HEA PADZZ WASHER, RECESSED PADZZ BEARING, SLEEVE XADZZ CASE... 1 END OF FIGURE 38-1

120 SECTION II FIGURE 39. ACCESSORY DRIVE GEAR ASSEMBLY (SHEET 1 OF 2)

121 SECTION II FIGURE 39. ACCESSORY DRIVE GEAR ASSEMBLY (SHEET 2 OF 2)

122 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 39 ACCESSORY DRIVE GEAR ASSEMBLY AHFDD GEAR ASSEMBLY, ACCES SEE FIGURE 2... REF FOR NA.. 1 PADZZ STD SCREW, MACHINE PADZZ AN960C10L WASHER, FLAT PADZZ STD SCREW, CAP, SOCKET HE PADZZ COVER, INNER BEVEL G PADZZ NUT, PLAIN, ROUND PADZZ WASHER, KEY PADZZ RING, RETAINING PADZZ GEARSHAFT, BEVEL PADZZ HOUSING, ANTIFRICTIO PADZZ BEAR ING, BALL, ANNULA PADZZ SPACER, SLEEVE PADZZ BUSHING, SLEEVE PADZZ SHIM IN IN LAMINATIONS... V 14 PADZZ HOUSING, ANTIFRICTIO PADZZ NUT, PLAIN, ROUND PADZZ WASHER, KEY AHDDD GEAR ASSEMBLY AHDZZ RING, ACCESSY GEAR AHDZZ GEAR, ACC, INNER, BEVE PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 20 PADZZ SHIM IN THK... V 21 PADZZ BEARING, ROLLER, CYLI PADZZ SPACER, SLEEVE PADZZ SPACER, BEARING AHDZZ MS RING, RETAINING PADZZ BEAR ING, BALL, ANNULA PADZZ HOUSING, ANTIFRICTIO PADDD CARRIER, ACCESSORY D PADZZ STD NUT, PLAIN, HEXAGO PADZZ STD3018K12..WASHER, KEY PADZZ STUD, PLAIN XDDZZ STD PIN, STRAIGHT, HEADLE MDDZZ STD PIN, STRAIGHT, HEADLE MAKE FROM

123 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY PADZZ NUT, SLEEVE XADZZ CARRIER HALF... 2 END OF FIGURE 39-2

124 SECTION II FIGURE 40. STARTER DRIVE ASSEMBLY AND RELATED PARTS

125 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 40 STARTER DRIVE ASSEMBLY AND RELATED PARTS 1 PAOZZ STD NUT, SELF-LOCKING, EX PAOZZ AN960C516L WASHER, FLAT PAODD STARTER DRIVE ASSEM SEE FIGURES AND 64 FOR BREAKDOWN. 4 PAOZZ PACKING, PREFORMED AHOZZ M83248/1-006 PACKING, PREFORMED... 1 END OF FIGURE 40-1

126 SECTION II FIGURE 41. STARTER DRIVE ASSEMBLY

127 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 41 STARTER DRIVE ASSEMBLY PAODD STARTER DRIVE ASSEM SEE FIGURE REF FOR NA.. 1 PADZZ AN BOLT, MACHINE PADZZ STD30S3-3 BOLT, MACHINE PADZZ STD3023K1.WASHER, KEY PADZZ SEAL, STARTER GEAR BO PADZZ SHIM IN, IN LAMINATIONS... V 6 PADZZ NUT, PLAIN, ROUND PADZZ WASHER, SPRING TENSI PADZZ RING, RETAINING PADZZ GEAR SHAFT, BEVEL PADZZ MS RING, RETAINING PADZZ BEARING, BALL, ANNULA PADZZ LINER, STARTER DRIVE PAOZZ STD BOLT, MACHINE PAOZZ RETAINER, OIL SEAL PAOZZ SHIM... V 16 PAOZZ M83248/1-224.PACKING, PREFORMED PAOZZ SEAL, PLAIN ENCASED PADZZ NUT, PLAIN, ROUND PADZZ WASHER, KEY PADZZ MS24693C270 SCREW, MACHINE PADZZ AN BOLT, MACHINE PADZZ WASHER, SEALING PADZZ SHIELD ASSEMBLY, STA PADZZ M83248/1-242.PACKING, PREFORMED PADZZ BEARING, BALL, ANNULA PADZZ GEARSHAFT ASSY, BEVE PADZZ SHIM IN THK... V 27 PADZZ SHIM IN THK... V 27 PADZZ SHIM IN THK... V 27 PADZZ SHIM IN THK... V 27 PADZZ SHIM IN THK... V 28 PADZZ BEARING, ROLLER, CYLI PADZZ SUPPORT, STARTER GEA PADZZ SEAL, PLAIN ENCAS PAOZZ REDUCER PAOZZ M83248/1-908.PACKING, PREFORMED PADDD HOUSING ASSY, INLET SEE FIGURE FOR BREAKDOWN. END OF FIGURE 41-1

128 SECTION II FIGURE 42. STARTER DRIVE HOUSING

129 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 42 STARTER DRIVE HOUSING PADDD HOUSING ASSY, INLET SEE FIGURE REF FOR NHA. 1 PADZZ STD3033C16.RING, RETAINING PADZZ TUBE, OIL JUMPER, STA XDDZZ PIN, STRAIGHT, HEADLE PADZZ MS PIN, STRAIGHT, HEADLE PADZZ SPACER, RING PADZZ ADAPTER, STARTER DRI AHDZZ STD3012B9N.STUD, STEPPED IN OVERSIZE AHDZZ STD3012B9P.STUD, STEPPED IN OVERSIZE AHDZZ STD3012B9R.STUD, STEPPED IN OVERSIZE PADZZ STD302OB11N.STUD, STEPPED IN OVERSIZE XDDZZ STD302OB11P.STUD, STEPPED IN OVERSIZE PADZZ STD302OB11R.STUD, STEPPED IN OVERSIZE PADZZ MS INSERT, SCREW THREAD PADZZ MS INSERT, SCREW THREAD XDDZZ PLUG, VENT HOLE, STAR XDDZZ AN STUD, STEPPED XADZZ HOUSING... 1 END OF FIGURE 42-1

130 SECTION II FIGURE 43. OVERSPEED DRIVE AND TANK OUTLET COVER ASSEMBLY

131 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0405: ACCESSORY GEAR SECTION FIG. 43 OVERSPEED DRIVE AND TANK OUTLET COVER ASSEMBLY PAOFF COVER ASSEMBLY, OVER SEE FIGURE REF FOR NHA. 1 PAFZZ STRAINER ELEMENT, SE PAFZZ WASHER XDFZZ PLUG, MACHINE THREAD PAFZZ M83248/1-121.PACK ING, PREFORMED PAFZZ MS PIN, COTTER PAFZZ AN320C4.NUT, PLAIN, SLOTTED, H PAFZZ WASHER, FLAT PAFZZ BEARING, BALL, ANNULA PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 9 PAFZZ SHIM IN THK... V 10 PAFZZ GEARSHAFT, BEVEL PAFZZ COVER, OVERSPEED DRI... 1 END OF FIGURE 43-1

132 SECTION II FIGURE 44. FUEL SYSTEM COMPONENTS (SHEET 1 OF 4)

133 SECTION II FIGURE 44. FUEL SYSTEM COMPONENTS (SHEET 2 OF 4)

134 SECTION II FIGURE 44. FUEL SYSTEM COMPONENTS (SHEET 3 OF 4)

135 SECTION II FIGURE 44. FUEL SYSTEM COMPONENTS (SHEET 4 OF 4)

136 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0406: FUEL SYSTEM FIG. 44 FUEL SYSTEM COMPONENTS 1 PAOZZ MS SCREW, MACHINE PAOZZ MS NUT, SELF-LOCKING, EX PAOZZ CLAMP, LOOP AHOZZ HOSE ASSEMBLY, NONME AHOZZ AN832-4K NIPPLE, TUBE PAOZZ M83248/1-904 PACKING, PREFORMED AHOZZ AN837-4K ELBOW, TUBE PAOZZ AN924-4K NUT, PLAIN, HEXAGO AHOZZ MS SCREW PAOZZ HOSE ASSEMBLY, TO PR PAOZZ MS BOLT, MACHINE PAOZZ STD NUT, SELF-LOCKING, EX PAOZZ AN96OC1OL WASHER, FLAT AHOZZ VALVE, SOLENOID PAOZZ BRACKET, SOLENOID SW PAOZZ CLAMP, TUBE SUPPORT PAOZZ BRACKET, CLAMPING PAOZZ CLAMP, TUBE ASSEMBLY PAOZZ CLAMP, TUBE ASSEMBLY PAOZZ TUBE ASSEMBLY, METAL PAOZZ MS BOLT, MACHINE PAOZZ STD BOLT, MACHINE PAOZZ MS21919WH2 CLAMP, LOOP IN DIA PAOZZ TUBE ASSEMBLY, METAL PAOZZ NOZZLE, FUEL INJECTI PAOZZ CLAMP, LOOP AHOZZ MS STRAP, TIEDOWN AHOZZ CUSHION AHOZZ CUSHION AHOZZ CUSHION AHOZZ HOSE ASSEMBLY, NONME AHOZZ AN919-14J REDUCER, EXT THD AHOZZ M83248/1-910 PACKING, PREFORMED PAOZZ MS BOLT, MACHINE AHOZZ CLAMP AND TAPE ASSY PAOZZ CLAMP, LOOP PAOZZ BRACKET, DOUBLE ANGL PAOZZ HOSE, NONMETALLIC PAOZZ ELBOW, FLANGE TO TUB PAOZZ M83248/1-021 PACKING, PREFORMED PAOZZ CLAMP, LOOP AHOZZ HOSE ASSEMBLY, NONME PAOZZ ELBOW, FLANGE TO TUB PAOZZ MS BOLT, MACHINE PAODD FILTER, FLUID SEE FIGURE 51 FOR... 1 BREAKDOWN. 44-1

137 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 46 PAOZZ BRACKET ASSEMBLY, FI PAOZZ AN919-12K REDUCER, EXT THD PAOZZ M83248/1-906 PACKING, PREFORMED AHOZZ HOSE AHOZZ STD BOLT, MACHINE AHOZZ VALVE AHOZZ BRACKET ASSY PAOZZ AN SCREW, MACHINE PAOZZ FLEX TUBE ASSY PAOZZ HOSE, NONMETALLIC PAOZZ AN919-3J REDUCER, TUBE PAOZZ M83248/1-905 PACKING, PREFORMED PAOZZ MS24392J3 NIPPLE, TUBE PAOZZ M83248/1-903 PACKING, PREFORMED AHOZZ HOSE AHOZZ HOSE ASSEMBLY, NONME AHOZZ MS51523B4S TEE, TUBE TO SWVL AHOZZ FITTING, REDUCER AHOZZ AN919-2K REDUCER, EXT THD AHOZZ VALVE, PRESSURIZING PAOZZ AN815-4J NIPPLE, BOSS AHOZZ VALVE, STOP CHECK PAOZZ HOSE, NONMETALLIC PAOZZ HOSE, NONMETALLIC PAOZZ MS BOLT, MACHINE PAODD FLOW DIVIDER, FUEL PAOZZ MS BOLT, MACHINE PAOZZ BRACKET, FUEL FLOW D PAOZZ CLAMP, LOOP IN DIA PAOZZ HOSE ASSEMBLY, NONME PAOZZ MS BRACKET, ANGLE PAOZZ MS24392D10 NIPPLE, TUBE PAOZZ MS PACKING, PREFORME AHOZZ CLAMP, LOOP PAOZZ CLAMP, LOOP PAOZZ HOSE ASSEMBLY, NONME PAOZZ MS PLUG, MACHINE THREAD PAOZZ STD NUT, SELF-LOCKING, EX PAOZZ AN960C516L WASHER, FLAT PAODD PUMP, CENTRIFUGAL SEE FIGURE 47 FOR... 1 BREAKDOWN. 86 PAOZZ GASKET PAOZZ MS BOLT, MACHINE PAODD FILTER AND INDICATO SEE FIGURE FOR BREAKDOWN. 89 PAOZZ BRACKET, ANGLE PAOZZ BRACKET, FUEL, FILTER... 1 END OF FIGURE 44-2

138 SECTION II FIGURE 45. HYDRO-MECHANICAL ASSEMBLY (HMA) AND RELATED PARTS

139 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0406: FUEL SYSTEM FIG.45 HYDRO-MECHANICAL ASSEMBLY (HMA) AND RELATED PARTS 1 PAOZZ MS NUT, SELF-LOCKING, EX PAOZZ AN96OC1OL WASHER, FLAT PAOZZ STD NUT, SELF-LOCKING, EX PAOZZ AN960C516L WASHER, FLAT AHODD HYDRO. MECH. ASSY PAOZZ GASKET AHOZZ SEAL SPECIAL F/C... 1 END OF FIGURE 45-1

140 SECTION II FIGURE 46. DIGITAL ELECTRONIC CONTROL UNIT (DECU) AND RELATED PARTS

141 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0406: FUEL SYSTEM FIG. 46 DIGITAL ELECTRONIC CONTROL UNIT (DECU) AND RELATED PARTS 1 AHOZZ KIT, DECU AHODD DIGITAL ELE CON UNI PAOZA MS NUT, SELF-LOCKING, EX AHOZZ MS BOLT, MACHINE PAOZZ AN96QC10L.WASHER, FLAT... 1 END OF FIGURE 46-1

142 SECTION II FIGURE 47. FUEL BOOST PUMP ASSEMBLY

143 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0406: FUEL SYSTEM FIG. 47 FUEL BOOST PUMP ASSEMBLY PAODD PUMP, CENTRIFUGAL SEE FIGURE 44 FOR... REF NA.. 1 PAOZZ MS SCREW, MACHINE PAOZZ AN960-10L.WASHER, FLAT PAOZZ COVER ASSY, HOUSING PAOZZ MS PACKING, PREFORMED PADZZ AN315C5R.NUT, PLAIN, HEXAGON PADZZ WASHER, KEY PADZZ BUSHING, SLEEVE PADZZ SHIM IN, IN LAMINATIONS PADZZ SHAFT, DRIVE, FUEL B PADZZ RING, RETAINING PADZZ MS SCREW, MACHINE PADZZ SPACER, PLATE PADZZ M83248/1-028.PACKING, PREFORMED PADZZ RETAINER, PACKING PADZZ M83248/1-019.PACKING, PREFORMED PADZZ PACKING, PREFORMED PADZZ BEARING, SLEEVE PADZZ SHAFT, IMPELLER, FUEL PADZZ KEY, MACHINE PADZZ IMPELLER, PUMP, CENTR PADZZ SLEEVE, SHAFT, PUMP XBDZZ PLATE, IDENTIFICATIO PADZZ MS MARKER, IDENTIFIC PADZZ HOUSING, FUEL BOOSTE... 1 END OF FIGURE 47-1

144 SECTION II FIGURE 48. MAIN FUEL MANIFOLD AND RELATED PARTS

145 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0406: FUEL SYSTEM FIG.48 MAIN FUEL MANIFOLD AND RELATED PARTS 1 PAOZZ BOLT, CLOSE TOLERANC 28 2 PAOZZ MS WASHER, FLAT 4 3 PAOZZ SUPPORT, FIRESHIELD 23 4 PAOZZ BRACKET, DOUBLE ANGL 4 5 PAOZZ BRACKET, ANGLE 1 6 PAOZZ PLATE, PROBE, DIFFUSE 1 7 PAOZZ BRACKET, TEMPERATURE 2 8 PAODD MANIFOLD ASSY., FUEL 1 9 PAOZZ STD BOLT, MACHINE 8 10 PAOZZ COVER, ACCESS 1 11 PAOZZ PACKING, PREFORMED 4 12 PAOZZ COVER, ACCESS 1 13 PAOZZ ELBOW, MANIFOLD ASSE 1 14 PAOZZ ELBOW, MANIFOLD ASSE 1 15 PADZZ NOZZLE, FUEL INJECTI PADZZ PACKING, PREFORMED 1 17 PADZZ NOZZLE, FUEL INJECTI 1 18 PADZZ SEAL, PLAIN PADZZ MANIFOLD ASSY 1 20 PAODD MANIFOLD ASSY, FUEL 1 21 PAOZZ STD BOLT, MACHINE 8 22 PAOZZ COVER, ACCESS 1 23 PAOZZ PACKING, PREFORMED 4 24 PAOZZ COVER, ACCESS 1 25 PAOZZ ELBOW, MANIFOLD ASSE 1 26 PAOZZ ELBOW, MANIFOLD ASSE 1 27 PADZZ NOZZLE, FUEL INJECTI PADZZ PACKING, PREFORMED 1 29 PADZZ NOZZLE, FUEL INJECTI 1 30 PADZZ SEAL, PLAIN PADZZ MANIFOLD ASSY 1 32 PAOZZ SEAL, PLAIN 28 END OF FIGURE 48-1

146 FIGURE 49. MAIN FUEL FILTER

147 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0406: FUEL SYSTEM FIG. 49 MAIN FUEL FILTER PAODD FILTER AND INDICATO SEE FIGURE 44 REF FOR NHA. 1 PAOZZ AN SCREW, MACHINE 4 2 PAODD INDICATOR, PRESSURE 1 3 XDOZZ M25988/1-006.PACKING, PREFORMED 2 4 PAODD FILTER, FLUID SEE FIGURE 50 FOR 1 BREAKDOWN. 5 PAOZZ *FILTER ELEMENT, FLUI. 1 END OF FIGURE 49-1

148 FIGURE 50. FUEL FILTER ASSEMBLY

149 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0406: FUEL SYSTEM FIG.50 FUEL FILTER ASSEMBLY PAODD FILTER, FLUID SEE FIGURE 49 FOR NHA. REF 1 XADZ NAME PLATE 1 2 XADZ HEAD ASSEMBLY, FUEL 1 3 PAOZZ SPACER RING. 1 4 PADZ PACKING PREFORMED 1 5 PADZ VALVE BY PASS 1 6 PADZ SPRING, BYPASS 1 7 PADZ SHIM V 8 PADZ NIPPLE ASSY 1 9 PAOZZ MS PAC KING, PREFORME 1 10 PADZ SPRING 1 11 PAOZZ MS PACKING PREFORMED 1 12 PAOZZ MS24391D4L.PLUG, MACHINE THREAD 1 13 PAOZZ MS PACKING PREFORMED 1 14 PAOZZ BOWL ASSY, FILTER, FU 1 END OF FIGURE 50-1

150 FIGURE 51. FUEL FILTER AND ELEMENT ASSEMBLY

151 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0406: FUEL SYSTEM FIG.51 FUEL FILTER AND ELEMENT ASSEMBLY PAODD FILTER, FLUID SEE FIGURE 44 FOR NHA. REF 1 PAODD FILTER, FLUID 1 2 PAOZZ Z-088..INDICATOR, PRESSURE 1 3 PAOZZ MS PACKING, PREFORMED 1 4 PAOZZ M83248/ PACKING, PREFORMED 1 5 PAOZZ BOWL, SEDIMENT 1 6 PAOZZ MS PACKING, PREFORMED 1 7 XDDZ H..HEAD, FLUID FILTER 1 8 PAOZZ FILTER ELEMENT, FLUI 1 9 AHOZZ M25988/ PACKING, PREFORMED 1 END OF FIGURE 51-1

152 FIGURE 52. PRIMARY ELECTRICAL HARNESS ASSEMBLY

153 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0407: ELECTRICAL AND IGNITION SYSTEM FIG. 52 PRIMARY ELECTRICAL HARNESS ASSEMBLY 1 PAOZZ MS SCREW, MACHINE 1 2 AHOZZ NUT 1 3 AHOZZ CLAMP, LOOP IN DIA 1 4 AHOZZ BRACKET 1 5 AHOZZ D38999/28-2W NUT 1 6 AHOZZ MS PACKING, PREFORMED 1 7 AHOZZ BRACKET-ASSY OF 1 8 AHOZZ HARNESS ASSY, PRIMA 1 END OF FIGURE 52-1

154 FIGURE 53. REVERSIONARY ELECTRICAL HARNESS ASSEMBLY

155 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0407: ELECTRICAL AND IGNITION SYSTEM FIG.53 REVERSIONARY ELECTRICAL HARNESS ASSEMBLY 1 AHOZZ CLAMP, LOOP 1 2 PAOZZ MS NUT, SELF-LOCKING, EX 1 3 AHOZZ CLAMP, LOOP 1 4 AHOZZ BRACKET-ASSY OF 1 5 AHOZZ HARNESS ASSY, REVER 1 END OF FIGURE 53-1

156 FIGURE 54. ACCESSORY ELECTRICAL HARNESS ASSEMBLY

157 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0407: ELECTRICAL AND IGNITION SYSTEM FIG. 54 ACCESSORY ELECTRICAL HARNESS ASSEMBLY 1 PAOZZ MS SCREW, MACHINE 4 2 AHOZZ NUT 1 3 AHOZZ CLAMP, LOOP IN 3 4 AHOZZ BRACKET 1 5 PAOZZ MS NUT, SELF-LOCKING, EX 3 6 AHOZZ CLAMP, LOOP 1 7 AHOZZ MS STRAP, TIEDOWN 2 8 AHOZZ CUSHION 1 9 AHOZZ CUSHION 1 10 PAOZZ MS24693S4 SCREW, MACHINE 4 11 PAOZZ MS NUT 4 12 AHOZZ D38999/22AW DUMMY RECEPTACLE AHOZZ BRACKET 1 14 AHOZZ HARNESS ASSY, ACCSY 1 END OF FIGURE 54-1

158 FIGURE 55. IGNITION SYSTEM COMPONENTS (SHEET 1 OF 2)

159 FIGURE 55. IGNITION SYSTEM COMPONENTS (SHEET 2 OF 2)

160 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0407: ELECTRICAL AND IGNITION SYSTEM FIG. 55 IGNITION SYSTEM COMPONENTS 1 PAOZZ MS SCREW, MACHINE 7 2 PAOZZ MS NUT, SELF-LOCKING, EX 15 3 PAOZZ MS SCREW, MACHINE 2 4 PAOZZ NUT, PLAIN, BARREL 2 5 PAOZZ CLAMP ASSEMBLY, LOOP 2 6 PAOZZ MS BOLT, MACHINE 2 7 PAOZZ SPACER, SLEEVE 0.22 IN CENTER, 0.25 IN LONG 2 8 AHOZZ BRACKET, IGNITION UN 1 9 AHOZZ BRACKET, IGNITION UN 1 10 PAOZZ EXCITER, IGNITION 1 11 PAOZZ MS BOLT, MACHINE 2 12 PAOZZ BRACKET, DOUBLE ANGL 1 13 PAOZZ CLAMP, LOOP 6 14 PAOZZ SPACER, PLATE 1.50 IN LONG 1 15 PAOZZ BRACKET, ASSEMBLY, AN 1 16 PAOZZ STRAP, RETAINING 1 17 AHOZZ MS SCREW 4 18 PAOZZ CLAMP, TUBE ASSEMBLY 1 19 PAOZZ CLAMP, TUBE ASSEMBLY 1 20 PAOZZ IGNITER, SPARK, GAS T 4 21 PAOZZ MS BOLT, MACHINE 4 22 PAOZZ STD NUT, SELF-LOCKING, EX 6 23 PAOZZ MS BOLT, MACHINE 2 24 PAOZZ MS SCREW, MACHINE 2 25 PAOZZ BRACKET, ANGLE 0.25 IN LONG, 0.88 IN 2 BASE. 26 PAOZZ COIL AND CABLE ASSE 1 27 KFFFZ RING PART OF KIT P/N KFFFZ SLEEVE PART OF KIT P/N KFFFZ PACKING, PREFORMED PART OF KIT P/N KFFFZ WASHER PART OF KIT P/N KFFFZ WASHER PART OF KIT P/N KFFFZ WASHER, FLAT PART OF KIT P/N KFFFZ RING PART OF KIT P/N KFFFZ INSULATOR PART OF KIT P/N PAOZZ CLAMP, LOOP PAOZZ MS SCREW, MACHINE 1 PAFFF PARTS KIT, COIL AND U/O P/N SEE GROUP 50 FOR COMPONENTS. END OF FIGURE 55-1

161 FIGURE 56. THERMOCOUPLE LEAD ASSEMBLY AND RELATED PARTS

162 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0407: ELECTRICAL AND IGNITION SYSTEM FIG. 56 THERMOCOUPLE LEAD ASSEMBLY AND RELATED PARTS 1 PAOZZ MS NUT, SELF-LOCKING, EX 3 2 PAOZZ MS SCREW, MACHINE 1 3 AHOZZ CLAMP, LOOP IN DIA 2 4 PAOZZ MS SCREW, MACHINE 1 5 PAOZZ STD BOLT, MACHINE 2 6 PAOZZ NAS SCREW, HEX HD PHLP R 2 7 AHOZZ LEAD, ELECTRICAL 1 END OF FIGURE 56-1

163 FIGURE 57. RIGHT AND LEFT-HAND BUS BAR ASSEMBLIES AND RELATED PARTS

164 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0407: ELECTRICAL AND IGNITION SYSTEM FIG. 57 RIGHT AND LEFT-HAND BUS BAR ASSEMBLIES AND RELATED PARTS 1 PAOZZ STD BOLT, MACHINE 9 2 PAOZZ NAS SCREW, HEX HD PHLP R 7 3 PAOZZ MS BOLT, MACHINE 1 4 PAOZZ BUS, CONDUCTOR 1 5 PAOZZ NAS SCREW, MACHINE 2 6 PAOZZ NAS SCREW, MACHINE 2 7 PAOZZ BUS, CONDUCTOR 1 8 PAOZZ NAS1S SCREW, MACHINE 3 9 PAOZZ NAS SCREW, MACHINE 3 10 PAOZZ EAB700-3 CLAMP, LOOP IN DIA 5 END OF FIGURE 57-1

165 FIGURE 58. THERMOCOUPLE HARNESSES AND RELATED PARTS

166 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0407: ELECTRICAL AND IGNITION SYSTEM FIG. 58 THERMOCOUPLE HARNESSES AND RELATED PARTS AHFDD TURBINE ASSY, POWER SEE FIGURE 24 REF FOR NHA. 1 PAFZZ STD BOLT, MACHINE 30 2 PAFZZ NAS62OC1OL.WASHER, FLAT 8 3 PAFZZ THERMOCOUPLE, IMMERS 2 4 PAFZZ THERMO COUPLE, IMMERS 2 5 PAFZZ THERMOCOUPLE, IMMERS 1 6 PAFZZ PIN, ALIGNMENT, NOZZL PAFZZ GASKET 10 END OF FIGURE 58-1

167 FIGURE 59. LUBRICATION SYSTEM COMPONENTS (SHEET 1 OF 7)

168 FIGURE 59. LUBRICATION SYSTEM COMPONENTS (SHEET 2 OF 7)

169 FIGURE 59. LUBRICATION SYSTEM COMPONENTS (SHEET 3 OF 7)

170 FIGURE 59. LUBRICATION SYSTEM COMPONENTS (SHEET 4 OF 7)

171 FIGURE 59. LUBRICATION SYSTEM COMPONENTS (SHEET 5 OF 7)

172 FIGURE 59. LUBRICATION SYSTEM COMPONENTS (SHEET 6 OF 7)

173 FIGURE 59. LUBRICATION SYSTEM COMPONENTS (SHEET 7 OF 7)

174 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG. 59 LUBRICATION SYSTEM COMPONENTS 1 PAOZZ HOSE ASSEMBLY, NONME. 1 2 PAOZZ AN804K6 TEE, TUBE 1 3 AHOZZ AN924-6J NUT, PLAIN, HEXAGON 2 4 PAOZZ M83248/1-906 PACKING, PREFORMED.7 5 PAOZZ FITTING, HOSE TO STA 1 6 PAOZZ M83248/1-904 PACKING, PREFORMED 1 7 PAOZZ HOSE, NONMETALLIC. 1 8 PAOZZ TUBE ASSEMBLY, OIL P 1 9 AHOZZ AN815-8K UNION, FLRD TUBE 4 10 AHOZZ M83248/1-908 PACKING, PREFORMED 5 11 PAOZZ TEE ASSY, OIL SCAVEN 1 12 PAOZZ HOSE ASSEMBLY, NONM 1 13 PAOZZ AS GASKET-37 DEG FLRD 2 14 PAOZZ AS GASKET-37 DEG FLRD 1 15 PAOZZ MS BOLT, MACHINE 1 16 PAOZZ STD NUT, SELF-LOCKING, EX 2 17 AHOZZ MS SCREW 1 18 PAOZZ CLAMP, LOOP 2 19 PAOZZ BRACKET, ANGLE 0.88 IN LONG, 0.44 IN 1 BASE. 20 PAOZZ CLAMP, LOOP 8 21 PAOZZ HOSE ASSEMBLY, OIL P 1 22 PAOZZ MS CAP, TUBE 1 23 PAOZZ TEE AND SNUBBER, OIL 1 24 PAOZZ CLAMP, LOOP 2 25 AHOZZ HOSE 1 26 PAOZZ HOSE ASSEMBLY, NONME 1 27 PAOZZ AN815-6K NIPPLE, TUBE.4 28 AHOZZ HOSE 1 29 AHOZZ HOSE 1 30 AHOZZ HOSE 1 31 AHOZZ AS1039D TEE 1 32 PAOZZ MS NUT, SELF-LOCKING, EX.3 33 AHOZZ MS BOLT, MACHINE 3 34 PAOZZ AN96OC1OL WASHER, FLAT 3 35 AHOZZ VALVE-FLOW PROGRAM 1 36 PAOZZ MS PIN, COTTER 1 37 AHOZZ V110.PIN, COTTER 1 38 PAOZZ STD BOLT, MACHINE 1 39 PAOZZ MS NUT, SELF-LOCKING, EX 1 40 PAOZZ AN960C416L WASHER, FLAT PAOZZ BRACKET, OIL COOLER 1 42 PAOZZ MS BOLT, MACHINE 5 43 AHOZZ BRACKET 1 44 AHOZZ BRACKET

175 SECTION II TM P C1 (1) (2) (3) (4) ITEM NO SMR CODE CAGE PART NUMBER (5) DESCRIPTION AND USABLE ON CODE (UOC) 45 AHODD COOLER ASSEMBLY OIL SEE FIGURE FOR BREAKDOWN 46 PAOZZ HOSE ASSEMBLY, NONME PAOZZ CLAMP, LOOP IN DIA PAOZZ CLAMP, LOOP PAOZZ TUBE AND HOSE ASSEM AHOZZ BOLT PAOZZ M83248/1 020 PACKING, PREFORMED PAOZZ M83248/1 021 PACKING, PREFORMED AHOZZ TUBE ASSEMBLY, METAL PAOZZ COCK, DRAIN PAOZZ HOSE ASSEMBLY, NONME PAOZZ MS BOLT, MACHINE PAOZZ HOSE ASSEMBLY, NONME PAOZZ M83248/1 016 PACKING, PREFROMED PAOZZ MS SCREW, MACHINE PAOZZ TUBE ASSEMBLY, METAL AHOZZ TUBE ASSY AHOZZ FLANGE, TUBE AHOZZ FLANGE ASSY ALTERNATE TO P/N AHOZZ M83248/1 017 PACKING, PREFORMED PAOZZ HOSE ASSEMBLY, NONME PAOZZ CLAMP, LOOP PAOZZ HOSE ASSEMBLY, NONME PAOZZ AN919 12K REDUCER, EXT THD PAOZZ DETECTOR, METALLIC P PAOZZ CHIP DETECTOR PAOZZ M83248/ PACKING, PREFORMED PAOZZ HOUSING, FILTER, CHIP PAOZZ BRACKET, BEARING, CHI PAOZZ MS PLUG, MACHINE THREAD PAOZZ MS BOLT, MACHINE PAOZZ AN960C516L WASHER, FLAT PAOZZ MS BOLT, MACHINE PAOZZ CONNECTOR, FLUID, PUM PAOZZ MS NUT, SELF LOCKING, EX AHOZZ SPEED PICKUP ASSY PAOZZ MS NUT, SELF LOCKING, EX AHOZZ COVER, OVERSPEED PKP AHOZZ PICKUP ASSY PAOZZ AS GASKET PAOZZ BOLT, SELF LOCKING PAOZZ MS BOLT, MACHINE PAOZZ MS BOLT, MACHINE AHODD PUMP, ROTARY PAOZZ RD RING, RETAINING AHOZZ RD VALVE, CHECK PAOZZ M83248/ PACKING, PREFORMED PAOZZ STRAINER ELEMENT, SE (6) QTY 59 2

176 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 92 PAOZZ M83248/1-012 PACKING, PREFORMED 1 93 PAOZZ M83248/1-212 PACKING, PREFORMED 1 END OF FIGURE 59-3

177 FIGURE 60. OIL COOLER ASSEMBLY

178 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.60 OIL COOLER ASSEMBLY AHODD COOLER ASSEMBLY OIL SEE FIGURE 59 REF FOR NHA. 1 PAOZZ TUBE ASSEMBLY, OIL C. 1 2 PAOZZ MS PACKING, PREFORMED 2 3 PAOZZ AN919-12K REDUCER, TUBE 2 4 PAOZZ M83248/1-908.PACKING, PREFORMED 2 5 PAOZZ AN815-6K NIPPLE, BOSS. N 1 6 XADZZ COOLER 1 7 XADZZ UA COOLER ASSEMBLY, OIL 1 8 PADZZ U SEAL, ANTIPILFERAGE 1 9 PADZZ U THERMOSTAT, FLOW CON PADZZ U SPACER, RING 1 11 XDDZZ MS SCREW, DRIVE PADZZ U PLATE, IDENTIFICATIO XDDZZ U PLUG 2 14 PAOZZ MS INSERT, SCREW THREAD. 2 END OF FIGURE 60-1

179 FIGURE 61. OIL TEMPERATURE BULB

180 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.61 OIL TEMPERATURE BULB 1 XDOZZ MS TRANSMITTER, TEMPERA 1 2 PAOZZ MS GASKET 1 END OF FIGURE 61-1

181 FIGURE 62. OIL FILLER ASSEMBLY AND OIL FILLER STRAINER

182 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.62 OIL FILLER ASSEMBLY AND OIL FILLER STRAINER 1 PAOZZ MS BOLT, MACHINE 3 2 PAOOO FILLER ASSEMBLY, OIL 1 3 PAOZZ M83248/1-222 PACKING, PREFORMED 1 4 PAOZZ M83248/1-022 PACKING, PREFORMED 1 5 PAOZZ STRAINER ELEMENT, SE 1 END OF FIGURE 62-1

183 SECTION II FIGURE 63. OIL FILTER COVER ASSEMBLY, FILTER ELEMENT, INTEGRAL BYPASS INDICATOR, AND RELATED PARTS

184 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.63 OIL FILTER COVER ASSEMBLY, FILTER ELEMENT,INTEGRAL BYPASS INDICATOR,AND RELATED PARTS AHDDD HOUSING,GEARBOX,TUR SEE FIGURE 34 REF FOR NA. 1 PAOZZ STD NUT, SELF-LOCKING,EX 3 2 PAOZZ AN L WASHER, FLAT 3 3 PAOZZ MS PLUG, MACHINE THREAD 1 4 PAOZZ M83248/1-903 PACKING, PREFORMED 1 5 AHOZZ COVER ASSY, OIL FILT 1 6 AHOZZ FILTER ELEMENT, FLUI 1 7 PAOZZ M83248/1-012 PACKING, PREFORMED 1 8 AHOZZ M83248/1-114 PACKING, PREFORMED 1 9 PAOZZ M83248/1-149 PACKING, PREFORMED 1 END OF FIGURE 63-1

185 SECTION II FIGURE 64. STARTER GEARBOX FILTER AND RELATED PARTS

186 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.64 STARTER GEARBOX FILTER AND RELATED PARTS PAODD STARTER DRIVE ASSEM SEE FIGURE 40 REF FOR NHA. 1 PAOZZ JET, LUBE OIL 1 2 PAOZZ WASHER, SEALING 1 3 PAOZZ PACKING, PREFORME 1 END OF FIGURE 64-1

187 SECTION II FIGURE BEARING OIL FILTER AND RELATED PARTS

188 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.65 2 BEARING OIL FILTER AND RELATED PARTS AHOOO CONNECTOR ASSY SEE FIGURE 12 FOR REF NHA. 1 PAOZZ STRAINER, PRESSURE, O 1 2 AHOZZ M83248/1-902 PACKING, PREFORMED 1 3 AHOZZ BODY, FILTER, NO 2 BR 1 END OF FIGURE 65-1

189 SECTION II FIGURE AND 5 BEARING OIL FILTER AND RELATED PARTS

190 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.66 4 AND 5 BEARING OIL FILTER AND RELATED PARTS 1 PAOZZ SPRING, OIL FILTER, T. 1 2 PAOZZ FILTER ELEMENT, OIL 1 END OF FIGURE 66-1

191 SECTION II FIGURE 67. OIL DRAIN VALVE AND RELATED PARTS

192 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.67 OIL DRAIN VALVE AND RELATED PARTS 1 PAOZZ COCK, DRAIN 1 2 PAOZZ M83248/1-906 PACKING, PREFORMED 1 END OF FIGURE 67-1

193 SECTION II FIGURE 68. SELF SEALING CHIP DETECTOR AND RELATED PARTS

194 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.68 SELF SEALING CHIP DETECTOR AND RELATED PARTS 1 PAOZZ MS NUT, SELF-LOCKING, EX 2 2 PAOZZ MS SCREW, MACHINE 1 3 AHOZZ CLAMP, LOOP 1 4 PAOZZ STD BOLT, MACHINE 1 5 AHOZZ MS BRACKET, ANGLE 1 6 AHOZZ DETECTOR, CHIP 1 7 PAOZZ M83248/1-011 PACKING, PREFORMED 1 8 PAOZZ M83248/1-906 PACKING, PREFORMED 1 END OF FIGURE 68-1

195 SECTION II FIGURE 69. OIL LEVEL INDICATOR, OIL LEVEL FLOAT ASSEMBLY, AND RELATED PARTS

196 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0408: LUBRICATION SYSTEM FIG.69 OIL LEVEL INDICATOR,OIL LEVEL FLOAT ASSEMBLY,AND RELATED PARTS 1 PAOZZ MS BOLT, MACHINE 2 2 PAOZZ AN960C10L WASHER, LAT 4 3 PAOZZ COVER, OIL LEVEL IND 1 4 PAOZZ SPACER, SLEEVE 2 5 PAOZZ BOLT, ECCENTRIC HEAD 1 6 PAOZA MS NUT, SELF-LOCKING, EX 1 7 PAOZZ WASHER, FLAT 1 8 PAOZZ POINTER, DIAL 1 9 PAOZZ WASHER, SHOULDERED 1 10 PAOZZ MS BOLT, MACHINE 1 11 PAOZZ STD NUT, SELF-LOCKING, EX 1 12 PAOFF HOUSING ASSEMBLY, OI 1 13 PAOZZ MS SCREW, MACHINE 2 14 PAOZZ AN960-3L WASHER, FLAT 4 15 PAOZZ NUT, SELF-LOCKING PAOZZ SWITCH, SENSITIVE 1 17 PAOZZ MS RING, RETAINING 1 18 PAOZZ SEAL, PLAIN ENCASED 1 19 PAOZZ PACKING, PREFORMED 1 20 XDFDD HOUSING ASSY 1 21 PADZZ MS20470DD4-5 RIVET, SOLID 2 22 PADZZ RECEPTACLE ASSEMBLY 1 23 PADZZ MS20470DD3-5 RIVET, SOLID 4 24 AHDZZ NAS680A3 NUT, SELF-LOCKING, PL 2 25 XADZZ BRACKET 1 26 XADZZ HOUSING 1 27 PAOZZ M83248/1-012 PACKING, PREFORMED PAFFF FLOAT, ASSY, OIL, LEVE 1 29 PAFZZ MS PIN, COTTER 1 30 PAFZZ AN310C3 NUT, PLAIN, CASTELLAT 1 31 PAFZZ AN960C10L WASHER, FLAT V 32 PAFZZ FLOAT, OIL LEVEL 1 33 PAFZZ GAGE ROD, LIQUID LEV 1 END OF FIGURE 69-1

197 SECTION II FIGURE 70. TORQUEMETER SYSTEM COMPONENTS

198 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 0409: TORQUEMETER SYSTEM FIG.70 TORQUEMETER SYSTEM COMPONENTS 1 AHOZZ MS SCREW, MACHINE 4 2 PAFZZ AN960C416L WASHER, FLAT 2 3 AHFDD OUTPUT SHAFT & TORQUE 1 4 AHFDD PLATE 1 5 AHFDD SHAFT, OUTPUT 1 6 AHODD SENSOR, TORQUE 1 7 PAFZZ STD3019E35 PACKING, PREFORME 1 8 AHODD SIGNAL COND. UNIT 1 END OF FIGURE 70-1

199 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 50: REPAIR KITS FIG.KITS (LISTED NUMERICALLY BY PART NUMBERS) PAOZZ LTCT RTV CARTRIDGE KIT SEE FIGURE 8 FOR NA.. XAOZZ LTCT RTV CARTRIDGE. XAOZZ FN NOZZLE,INJECTION. PAFFF PARTS KIT, COIL AND SEE FIGURE 55 REF FOR NHA. KFFZZ RING 2 KFFZZ PACKING, PREFORMED 2 KFFZZ WASHER, FLAT 2 KFFZZ WASHER 2 KFFZZ SLEEVE 2 KFFZZ WASHER 2 KFFZZ SLEEVE 2 KFFZZ RING 4 KFFZZ INSULATOR 4 END OF FIGURE KITS-1

200 SECTION II (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 60: BULK MATERIAL FIG. BULK BULK MATERIAL 1 PAFZZ MS BOLT, MACHINE USED TO MAKE GUIDE PIN V 2 XDOZZ SLEEVE CHAFING V END OF FIGURE BULK-1

201 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 1 OF 37)

202 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 2 OF 37)

203 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 3 OF 37)

204 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 4 OF 37)

205 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 5 OF 37)

206 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 6 OF 37)

207 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 7 OF 37)

208 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 8 OF 37)

209 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 9 OF 37)

210 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 10 OF 37)

211 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 11 OF 37)

212 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 12 OF 37)

213 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 13 OF 37)

214 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 14 OF 37)

215 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 15 OF 37)

216 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 16 OF 37)

217 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 17 OF 37)

218 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 18 OF 37)

219 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 19 OF 37)

220 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 20 OF 37)

221 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 21 OF 37)

222 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 22 OF 37)

223 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 23 OF 37)

224 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 24 OF 37)

225 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 25 OF 37)

226 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 26 OF 37)

227 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 27 OF 37)

228 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 28 OF 37)

229 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 29 OF 37)

230 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 30 OF 37)

231 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 31 OF 37)

232 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 32 OF 37)

233 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 33 OF 37)

234 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 34 OF 37)

235 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 35 OF 37)

236 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 36 OF 37)

237 SECTION III FIGURE 71. SPECIAL TOOLS (SHEET 37 OF 37)

238 SECTION III (1) ITEM (2) SMR CODE (3) CAGEC (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 81: SPECIAL TOOLS FIG. 71 SPECIAL TOOLS 1 PADDD BH1643SBH-40 HEATER PROBE ASSEMB PADDD BH164354AW HEATER PROBE PADZZ CJ950 CLAM SHELL... 4 PADDD EX1003 AIT MOTER PBDDD GTL9396 EFA NOZZLE ADAPTER PBDDD GTL9397 EFA NOZZLE ADAPTER PBDDD HB-S-350 SOFT BRG BALANCE PBDDD KD7223 EFA 3RD NOZZLE ADAP PBDDD KD7352 EFA 1ST NOZZLE ADAP... BOI: 1 PER END ITEMS 10 PBDDD LTCT1004 PLATE, INSERTION PBFDD LTCT1009 PULLER, MECHANICAL PBDBD LTCT TEST STAND, FUEL PBDZZ LTCT1024 SOCKET, WRENCH, FACE PBFZZ LTCT1039 GAGE, BACKLASH... BOI: 1 PER 1-50 END ITEMS 15 PBDDD LTCT STROKE GAGE KIT, ENG PFDZZ LTCT LANYARD, FUEL CONTRO PFDZZ LTCT SPACER, FUEL BOOSTER PFDZZ LTCT FIXTURE, TEST, VALVE PBDZZ LTCT FIXTURE, TEST, MANIFO PBDZZ LTCT FIXTURE, TEST, NOZZLE PBDDD LTCT FIXTURE, TEST, FILTER PBDZZ LTCT FIXTURE, TEST, OIL CO PBDDD LTCT ADAPTER KIT, VALVE T.... (' \par 71-1

239 SECTION III (1) ITEM (2) SMR CODE (3) CAGEC (4) PART DESCRIPTION AND USABLE ON CODES (UOC) 24 PFDZZ LTCT LEAD, ELECTRICAL PBDZZ LTCT1057 SPACER, SLEEVE PBDZZ LTCT1081 WASHER, C, SPECIAL PADZZ LTCT1106 PIN, HOLLOW AGB BRG PBDZZ LTCT1114 GAGE, BACKLASH PBDZZ LTCT1115 FIXTURE, AIRCRAFT MA PADZZ LTCT11387 ELECTRODE, INNER SHR PBDZZ LTCT SPACER, TORQUE PBDDD LTCT TEMPLATE-IMPLR CONT PBDDD LTCT GAGE-IMPLLR CONTOUR PFDZZ LTCT ELECTRODE, INNER PFDZZ LTCT ELECTRODE, OUTER PFDZZ LTCT FIXTURE, MACHINING, P PBDDD LTCT FIX, WATER FLOW PBDDD LTCT FIX, FLOW AIR/WATER PBDDD LTCT FIX, FLOW AIR/WATER PBDDD LTCT FIX, FLOW AIR/WATER PBDDD LTCT FIX, FLOW 1&2 TURB IN PBDDD LTCT11519 FIX, FLOW AIT/WATER PAOZZ LTCT RTV CARTRIDGE KIT SEE GROUP 50 FOR COMPONENTS.... BOI: 1 PER END ITEMS 44 PADZZ LTCT1161 PULLER, OIL SEAL PBDZZ LTCT1172 PULLER PADDD LTCT1178 PULLER, 6&7 BEARING PBFZZ LTCT1184 FIXTURE, HOLDING, GEA.... BOI: 1 PER 1-50 END ITEMS (5) (6) QTY 71-2

240 SECTION III (1) ITEM (2) SMR CODE (3) CAGE (4) PART DESCRIPTION AND USABLE ON CODES (UOC) 48 PBDZZ LTCT FIXTURE, RESTRAINING. 49 PBDDD LTCT BALANCING MACHINE, D PBDZZ LTCT CRADLE ASSEMBLY, SHR PBOZZ LTCT1218 PULLER, MECHANICAL.... BOI: 1 PER END ITEMS 52 PADZZ LTCT1222 PULLER, BEARING PBDZZ LTCT1223 ADAPTER, HOLDING PBOZZ LTCT1228 INSTALLATION TOOL, S... BOI: 1 PER END ITEMS 55 PBFZZ LTCT1229 GAGE, BACKLASH... BOI: 1 PER 1-50 END ITEMS 56 PBOZZ LTCT1230 INSTALLATION TOOL, S... BOI: 1 PER END ITEMS 57 PBDZZ LTCT1247 FIXTURE, TEST, PRESSU PBDZZ LTCT1256 GAGE, BACKLASH PBOZZ LTCT1259 LIGHT, TEST, OIL LEVE... BOI: 1 PER END ITEMS 60 PBOZZ LTCT1260 FIXTURE, HOLDING, GEA.... BOI: 1 PER END ITEMS 61 PBDZZ LTCT12711 COMP BLADE REMOVAL PBOZZ LTCT1278 COVER, PROTECTIVE, EN... BOI: 1 PER END ITEMS 63 PBDZZ LTCT12905 FIX, OIL TARGET/FLOW PBDZZ LTCT1301 FIXTURE, TEST, PRESSU PBDZZ LTCT1302 DISK, RUPTURABLE PBFZZ LTCT13038 ALIGNMENT PIN, CYLIN... BOI: 1 PER 1-50 END ITEMS 67 PBDZZ LTCT13056 DRIVER, FIXTURE, PIN PBFZZ LTCT13344 FIX, TORQ, GP NUT... BOI: 1 PER 1-50 END ITEMS 69 PBFZZ LTCT CLINCHING TOOL, GUID... BOI: 1 PER 1-50 END ITEMS 70 PBDZZ LTCT13423 FIX, OIL FLOW PBFZZ LTCT13442 FIX, 4&5 BEARING PKG... BOI: 1 PER 1-50 END ITEMS 72 XDFZZ LTCT13737.NIPPLE XDFZZ MS PACKING, PREFORMED.... (5) (6) QTY 71-3

241 SECTION III (1) ITEM (2) SMR CODE (3) CAGEC (4) PART DESCRIPTION AND USABLE ON CODES (UOC) 74 XDFZZ LTCT13738.PLUG. 75 XDFZZ LTCT13739.SCREW XAFZZ LTCT13741.PLATE XDFZZ LTCT13740.GASKET XDFZZ MS PIN, SPRING XAFZZ LTCT13742.PLATE XDFZZ MS PACKING, PREFORMED PBDDD LTCT BEARING, SOFT BAL PBFZZ LTCT TESTER, SEAL LEAKAGE.... BOI: 1 PER 1-50 END ITEMS 83 PAFZZ LTCT PLATE, WRENCHING PIN.... BOI: 1 PER 1-50 END ITEMS 84 PBDZZ LTCT13635 FIXTURE, HOLDING, NOZ PBDZZ LTCT13645 GAGE-BACKLASH PBDZZ LTCT1366 PULLER, MECHANICAL PBDZZ LTCT13668 FIXTURE, TORQUE, ROTO PBDZZ LTCT1373 PULLER, MECHANICAL PBDZZ LTCT1374 PULLER, MECHANICAL PBDZZ LTCT1376 PULLER, BEARING PBFZZ LTCT13771 FIXTURE, AIRCRAFT MA... BOI: 1 PER 1-50 END ITEMS 92 PBDZZ LTCT PULL, 1ST GP RET PIN.... BOI: 1 PER -75 END ITEMS 93 PBDDD LTCT13787 VANE REMOVER, ELECTR PFDZZ LTCT13788 VANE REMOVER, ELECTR PBFZZ LTCT1379 PULLER, MECHANICAL.... BOI: 1 PER 1-50 END ITEMS 96 PBFZZ LTCT6883.SCREW, PULLER, MECHAN PBDZZ LTCT13803 DAMPENING RING, ROTO PBOZZ LTCT13839 PULLER, MECHANICAL.... BOI: 1 PER END ITEMS 99 PBFZZ LTCT FIXTURE, TORQUE AND.... BOI: 1 PER 1-50 END ITEMS 100 PBFZZ LTCT13868 TOOL SET, SEAL REMOV.... BOI: 1 PER 1-50 END ITEMS 101 PBFZZ LTCT HEATER, INDUCTION, TU.... BOI: 1 PER 1-50 END ITEMS 102 PBFZZ LTCT INSTALLING TOOL, BEA.... BOI: 1 PER 1-50 END ITEMS (5) (6) QTY 71-4

242 SECTION III (1) (2) (3) (4) ITEM SMR PART (5) CODE CAGE DESCRIPTION AND USABLE ON CODES (UOC) 103 PBFZZ C LTCT PULLER, MECHANICAL.... BOI: 1 PER 1-50 END ITEMS 104 PBDZZ LTCT1390 HOLDER, COMPRESSOR S PBOZZ LTCT WRENCH, OPEN END.... BOI: 1 PER END ITEMS 106 PBDZZ LTCT1394 ADAPTER NUT, COMPRES XAFZZ LTCT1409 WRENCH... BOI: 1 PER 1-50 END ITEMS 108 PBDDD LTCT1412 TEST STAND, FUEL PBDZZ LTCT CRADLE, COMB/TRUB ST PBDDD LTCT1414 TEST STAND, FUEL OIL PBDDD LTCT1415 STAND, TEST, FUEL MAN PBDZZ LTCT1416 ADAPTER ASSEMBLY, TE PBDZZ LTCT14163 FIXTURE, HOLDING, TUR PBDZZ LTCT14164 FIXTURE, HOLDING, TUR PBDZZ LTCT14188 REMOVAL TOOL, BEARIN PAOZZ LTCT1428 HANDLING TOOL, DETEN.... BOI: 1 PER END ITEMS 117 PAOZZ LTCT1430 HANDLING TOOL, DETEN.... BOI: 1 PER END ITEMS 118 PAOZZ LTCT1431 HANDLING TOOL, DETEN.... BOI: 1 PER END ITEMS 119 PBDZZ LTCT1435 REMOVAL TOOL, BEARIN PBDZZ LTCT1436 REMOVAL TOOL, BEARIN PBFZZ LTCT FIXTURE, POWER TURBI... BOI: 1 PER 1-50 END ITEMS 122 PBDZZ LTCT SHROUD, PT DISK BAL PBFDD LTCT14547 CONTROL UNIT.... BOI: 1 PER 1-50 END ITEMS 124 XDFZZ LTCT9356.TIMER, INTERVAL XDFZZ LTCT9357.SWITCH, PUSH PBFZZ LTCT FIXTURE, HOLDING... BOI: 1 PER 1-50 END ITEMS 127 PBFDD LTCT PULLER, TURBINE DISC.... BOI: 1 PER 1-50 END ITEMS 128 PBDDD LTCT ARBOR, BALANCING, TUR... (6) QTY 71-5

243 SECTION III (1) ITEM (2) SMR CODE (3) CAGE C (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 129 PBDDD LTCT14680 TOOL, AGB BRG CRIMP PBDDD LTCT GAGE, AGB PAD CONCEN PBDZZ LTCT TOOL, COMP RET. INSTA PBOBD LTCT SLING, FULL ENGINE.... BOI: 1 PER END ITEMS 133 XDOZZ LTCT CABLE ASSY PBDDD LTCT ARBOR, TURBINE DISC PBDZZ LTCT FIXTURE, COMPRESSOR PBDBD LTCT14751 GAGE, ACCY DR GR PBDZZ LTCT1507 PULLER, MECHANICAL PBDZZ LTCT1516 PULLER, MECHANICAL PAFZZ LTCT153 BAR, LOCATING.... BOI: 1 PER 1-50 END ITEMS 140 PBDZZ LTCT1536 HEATER, MOUNTING PAD PBFDZ LTCT1537 HEATER, HOUSING, INLE.... BOI: 1 PER 1-50 END ITEMS 142 PADZZ LTCT1562 COVER PBDZZ LTCT1577 STAND ROTOR, COMPRES PBDZZ LTCT1581 GAGE, DIAL INDICATIN PBDZZ LTCT1621 FIXTURE, TEST, OIL PR PAOZZ LTCT1643 DRIFT ASSEMBLY, COMP... BOI: 1 PER END ITEMS 147 PAOZZ LTCT1644 TOOL, INSTALLING AND.... BOI: 1 PER END ITEMS 148 PADZZ LTCT1754 ANVIL, SPUR GR BRG PBOZZ LTCT1960 PUNCH, DRIVE PIN... BOI: 1 PER END ITEMS 150 PADZZ LTCT197 SEPARATOR TOOL, COMP PBDBD LTCT20633 TEST STAND, ANTI- ICE PBDBD LTCT23746 ELECT CABLE TEST SE PBDDD LTCT TEST UNIT, TEMPERATU

244 SECTION III (1) ITEM (2) SMR CODE (3) CAGE C (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 154 PBDZZ LTCT BEARING, SLEEVE PBDZZ LTCT BEARING, SLEEVE PBDZZ LTCT BRG BAL, SOFT BRG PBDDD LTCT TEST SET, MAG PICKUP PBOBD LTCT KIT, VIB-T55 SERIES.... BOI: 1 PER END ITEMS 159 PBDDD LTCT FLOW BENCH, WATER PBOBD LTCT EHRT, COMPUTER... BOI: 1 PER END ITEMS 161 PADZZ LTCT3005 WRENCH, ACCY DR GR PADZZ LTCT3007 WRENCH, ACCY DR BEVE PADDD LTCT3024 FIX, ACCY DR GR TORQ PBDZZ LTCT3026 PULLER, MECHANICAL PBDBD LTCT315 TEST BENCH, ELECTRIC.... BOI :1 PER 1-75 END ITEMS 166 PBDBD LTCT ANALOG CONSOLE, EGT PBDDD LTCT340 TEST STAND, LUBE AND.... BOI :1 PER 1-75 END ITEMS 168 PFDZZ LTCT3486 GAGE, BACKLASH... BOI :1 PER 1-75 END ITEMS 169 PBDZZ LTCT3658 BUSH, PLANET GR FWD PBDZZ LTCT3663 BUSH, OUTPUT GR BRG PBDZZ LTCT3772 REMOVAL TOOL, COVER.... BOI :1 PER 1-75 END ITEMS 172 PBDZZ LTCT3785 FIXTURE, HOLDING, NUT PBDZZ LTCT3793 REMOVER, SEAL PBDZZ LTCT3836 FIX, BOOST PUMP TORQ PAFZZ LTCT387 ALIGNMENT PIN.... BOl: 1 PER 1-50 END ITEMS 176 PBDZZ LTCT3880 FIXTURE, ALIGNMENT, C PAFZZ LTCT3936 COVER, AIRCRAFT GROU... BOI: 1 PER 1-50 END ITEMS 178 PBFZZ LTCT3961 PULLER, MECHANICAL.... BOI: 1 PER 1-50 END ITEMS 71-7

245 SECTION III (1) ITEM (2) SMR CODE (3) CAGE C (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 179 PBDZZ LTCT4028 ADAPTER, BEARING SET.... BOI :1 PER 1-75 END ITEMS 180 PBDZZ LTCT4029 ADAPTER, BEARING SET PADZZ LTCT4904 FIXTURE, HOLDING, ACC.... BOI :1 PER 1-75 END ITEMS 182 PADZZ LTCT4937 TOOL, STRTR DR TORQ PBFZZ LTCT4968 INSTALLING TOOL, BEA.... BOI: 1 PER 1-50 END ITEMS 184 PBDZZ LTCT4983 DRIVER, BEARING AND PBFZZ LTCT6098 SUPPORT, DIAL INDICA... BOI: 1 PER 1-50 END ITEMS 186 PBDZZ LTCT6100 DRIVER, BEARING AND PBFZZ LTCT6173 PULLER, MECHANICAL.... BOI: 1 PER 1-50 END ITEMS 188 PBDZZ LTCT6184 GAGE, RING, PLAIN PBDZZ LTCT6208 FIXTURE, TEST, FLOW T PBDZZ LTCT6210 PUNCH, CUTTING, RECTA PBDZZ LTCT6214 FIXTURE, HOLDER, DISC PBFZZ LTCT6271 GUARD, TUBE, #1 OIL.... BOI: 1 PER 1-50 END ITEMS 193 PBFZZ LTCT6354 FIXTURE, ASSEMBLING... BOI: 1 PER 1-50 END ITEMS 194 PFDZZ LTCT6616 POWER ASSEMBLY, PIN PBFZZ LTCT MAINTENANCE KIT... BOI: 1 PER 1-50 END ITEMS 196 PBDZZ LTCT6643 FIXTURE, TEST, FLOW, O PBDDD LTCT6837 GAGE SET, ENGINE PBDBD LTCT6943 TEST SET, TORQUEMETE PBDZZ LTCT6987 TEST FIXTURE, ENGINE PADZZ LTCT7193 FIX, OIL TUBE PBFZZ LTCT7202 FIXTURE, HOLDING, TUB... BOI: 1 PER 1-50 END ITEMS 202 PBDDD LTCT FIX, REM SEAL PLATE PBDZZ LTCT7349 PLATE ASSEMBLY, GEAR

246 SECTION III (1) ITEM (2) SMR CODE (3) CAGE C (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 204 PBDZZ LTCT7510 PUSHER, AGB BRG... BOI :1 PER 1-75 END ITEMS 205 PBDBD LTCT GAGE, 2ND PT IN SEA PBFDD LTCT TOOL, #1, #2, BRG SEA... BOI: 1 PER 1-50 END ITEMS 207 PBDZZ LTCT FIXTURE, PIN DRIVER, TURBINE WHEEL PBDZZ LTCT SLING, AIRCRAFT MAIN PAOZZ LTCT KIT, RTV INJECTION.... BOI: 1 PER END ITEMS 210 XDOZZ INJECTION GUN XDOZZ MIXER XDOZZ LTCT COVER XDOZZ LTCT CLAMP PBDDD LTCT ADAPT, COMP ROTOR PBDDD LTCT FIX, COMP SHAFT STRE PBFDD LTCT PULLER, P SPACER.... BOI: 1 PER 1-50 END ITEMS 217 XDFDD LTCT PULLER XDFDD LTCT SHELL XDFDD MS BALL- STL XDFDD MS SPRING PIN XDFDD LTCT ADAPTER XDFDD LTCT ADAPTER XDFDD LTCT ADAPTER PFDZZ LTCT859 FIXTURE, TEST, VALVE PBDZZ LTCT896 FIXTURE, HOLD, IGNITE PBDBD LTCT899 FLOW TEST RIG, START PBDDD LTCT916 PULLER, SPUR GR BRGS PBDZZ LTCT9914 SCREW, GAGE ASSEMBLY PBDDD LTCT9915 GAGE ASSEMBLY, FORCE PBOZZ LTCT9917 COUPLING HALF, CLAMP.... BOI: 1 PER END ITEMS 231 PFDZZ LTCT WHEEL, ABRASIVE PFDZZ LTCT WHEEL, ABRASIVE PFDZZ LTCT WHEEL, ABRASIVE

247 SECTION III (1) ITEM (2) SMR CODE (3) CAGE C (4) PART (5) DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY 234 PADZZ NO 1. LOCKING PLIER PBFDD PD2501-SD MULTIPLIER, TORQUE W.... BOI: 1 PER 1-50 END ITEMS 236 XDFZZ PD BAR, SOCKET WRENCH H XDFZZ PD2545.HANDLE, TORQUE WRENC XDFZZ PD2555.INDICATOR ASSEMBLY XDFZZ PD2546.HANDLE PADZZ RA107D INSERTER, BEARING AN PADDD RCADC COUNTERSINK PADZZ RF08LPDE LOCKING, PULLER PADZZ RF6908W WRENCH PADZZ RF9808DEK DRIVE TOOL PADZZ RF9808DW COMBINATION TOOL PADZZ R1107XW DRIVER, INSERT PADZZ R1111W WRENCH, INSERTS PADZZ R210D INSERTER, BEARING AN PADZZ TC13554 ELEMENT STACK FIXTU PADZZ TQ4 WRENCH AHDZZ SPARK IGNITER ADAPT... END OF FIGURE 71-10

248 SECTION IV CROSS-REFERENCE INDEXES C 1 TM P NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM DELETED I 1

249 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM I-2

250 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM KITS I-3

251 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM I-4

252 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM BULK I-5

253 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM I-6

254 SECTION IV TM P C1 CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM DELETED I 7

255 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM I-8

256 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM I-9

257 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM ' I-10

258 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM I-11

259 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM I-12

260 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIGURE ITEM STOCK NUMBER FIGURE ITEM I-13

261 SECTION IV TM P C 1 CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM I

262 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM AE AE AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN310C AN315C5R AN320C AN AN AN804K AN815-4J AN815-6K AN815-8K AN832-4K AN833-4K AN837-4K AN919-12K AN919-14J AN919-2K AN919-3J AN924-4K AN924-6J AN932D AN932D AN932M AN938J AN939J AN960-10L AN L I-15

263 SECTION IV TM P C1 CROSS REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM AN960 3L AN L AN L AN960C10L AN960C AN960C416L AN960516L AN960C916L AS1039D AS AS AS A BH16435BH BH16435AW B0 8SS CJ D38999/22AW D38999/28 2W EAB EX FN KITS GTL GTL HB S KD KD LTCT LTCT I 16

264 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT KITS LTCT KITS LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT I-17

265 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT I-18

266 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT I-19

267 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT I-20

268 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT LTCT MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS I-21

269 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS C MS20426A MS20426A MS20426A MS20470DD MS20470DD MS MS MS MS MS21042L MS MS MS MS MS MS MS MS I-22

270 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM MS21919WCJ MS21919WCJ MS21919WCJ MS21919WH MS24390J MS24391D4L MS24392D MS24392D MS24392J MS24392J MS24392K MS24392K MS24393J MS24396J MS24399D MS24399J MS MS MS MS MS MS MS MS MS C MS24693C MS24693C MS24693C MS24693S MS24693S MS MS MS27769M MS27769M MS27769U MS MS MS MS MS I-23

271 SECTION IV TM P C1 CROSS REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS51523B4S MS MS MS MS MS MS MS MS MS MS MS MS MS DELETED MS MS MS MS MS I 24

272 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS BULK MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS I-25

273 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS M25988/ M25988/ M25988/ M45932/1-9L M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ I-26

274 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ S1349 M83248/ I-27

275 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83248/ M83413/8-G13BC NAS1057T NAS NAS NAS NAS620C10L NAS680A NO PD2501-SD PD PD PD PD RA107D RCADC RD RD RF08LPDE RF6908W RF9808DEK I-28

276 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM RF9808DW R1107XW R1111W R210D STD3000E STD3001B12N STD3001B12P STD3001B12R STD3001B23N STD3001B23P STD3001B23R STD3001B4N STD3001B4P STD3001B4R STD3007B8N STD3007B8P STD3007B8R STD3009B4N STD3009B4P STD3009B4R STD3009B5N STD3009B5P STD3009B5R STD3012B9N STD3012B9P STD3012B9R STD3017E STD3018K STD3018K STD3019E STD3019E STD3019E STD3019E STD3019E STD3019E STD3019E STD3020B11N STD3020B11P STD3020B11R STD STD STD3023K STD3023K I-29

277 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM STD3023K STD3033C STD3033S STD3035C STD3035S STD3045B2N STD3045B2P STD3045B2R STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD STD I-30

278 TM P C1 CROSS REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM STD STD STD STD STD STD STD STD STD STD STD STD TC TQ U UA U U U U I 31

279 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM KITS KITS KITS KITS KITS I-32

280 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM KITS KITS KITS KITS KITS I-33

281 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-34

282 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-35

283 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-36

284 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-37

285 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-38

286 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-39

287 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-40

288 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-41

289 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-42

290 SECTION IV TM P C1 CROSS REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM R I 43

291 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-44

292 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-45

293 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-46

294 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM Bl I-47

295 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM t I-48

296 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-49

297 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM S S S S S S S llS S S S S S S S I-50

298 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-51

299 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM I-52

300 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX CAGEC PART NUMBER STOCK NUMBER FIG. ITEM S W Z H D V BULK 2 I-53

301

302 These are the instructions for sending an electronic 2028 The following format must be used if submitting an electronic The subject line must be exactly the same and all fields must be included; however only the following fields are mandatory: 1, 3, 4, 5, 6, 7, 8, 9, 10, 13, 15, 16, 17, and 27. From: Whomever To: Subject: DA Form From: Joe Smith 2. Unit: home 3. Address: 4300 Park 4. City: Hometown 5. St: MO 6. Zip: Date Sent: 19--OCT Pub no: Pub Title: TM 10. Publication Date: 04--JUL Change Number: Submitter Rank: MSG 13. Submitter FName: Joe 14. Submitter MName: T 15. Submitter LName: Smith 16. Submitter Phone: Problem: Page: Paragraph: Line: NSN: Reference: Figure: Table: Item: Total: Text: This is the text for the problem below line 27.

303 RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS For use of this form, see AR ; the proponent agency is ODISC4. Use Part II(reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/ Supply Manuals (SC/SM) DATE 8/30/02 TO: (Forward to proponent of publication or form)(include ZIP Code) Commander, U.S. Army Aviation and Missile Command ATTN: AMSAM--MMC--MA--NP R eds t one A r s enal, AL FROM: (Activity and location)(include ZIP Code) MSG, Jane Q. Doe 1234 Any Street Nowhere Town, AL PART 1 -- ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS PUBLICATION/FORM NUMBER DATE TITLE Organizational, Direct Support, And General Support Maintenance Manual for Machine Gun,.50 TM Sep 2002 Caliber M3P and M3P Machine Gun Electrical Test Set Used On Avenger Air Defense Weapon System ITEM PAGE PARA-- GRAPH LINE * FIGURE TABLE RECOMMENDED CHANGES AND REASON 1 WP0005 PG 3 2 Test or Corrective Action column should identify a different WP number. TYPED NAME, GRADE OR TITLE MSG, Jane Q. Doe, SFC * Reference to line numbers within the paragraph or subparagraph. TELEPHONE EXCHANGE/ SIGNATURE AUTOVON, PLUS EXTEN- SION DA FORM 2028, FEB 74 REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED. USAPA V3.01

304 TO: (Forward direct to addressee listed in publication) FROM: (Activity and location) (Include ZIP Code) Commander, U.S. Army Aviation and Missile Command ATTN: AMSAM--MMC--MA--NP R eds t one A r s enal, AL MSG, Jane Q. Doe 1234 Any Street Nowhere Town, AL PART II -- REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS PUBLICATION NUMBER DATE TITLE DATE 8/30/02 PAGE COLM LINE NATIONAL STOCK NUMBER REFERENCE FIGURE ITEM TOTAL OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION PART III -- REMARKS (Any general remarks or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.) TYPED NAME, GRADE OR TITLE MSG, Jane Q. Doe, SFC TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION SIGNATURE USAPA V3.01

305 RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS For use of this form, see AR ; the proponent agency is ODISC4. Use Part II(reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/ Supply Manuals (SC/SM) DATE TO: (Forward to proponent of publication or form)(include ZIP Code) Commander, U.S. Army Aviation and Missile Command ATTN: AMSAM-MMC-MA-NP Redstone Arsenal, AL FROM: (Activity and location)(include ZIP Code) PART 1 -- ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS PUBLICATION/FORM NUMBER DATE T I T LE ITEM PAGE PARA-- GRAPH LINE * FIGURE TABLE RECOMMENDED CHANGES AND REASON TYPED NAME, GRADE OR TITLE * Reference to line numbers within the paragraph or subparagraph. TELEPHONE EXCHANGE/ AUTOVON, PLUS EXTEN- SION SIGNATURE DA FORM 2028, FEB 74 REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED. USAPA V3.01

306 TO: (Forward direct to addressee listed in publication) FROM: (Activity and location) (Include ZIP Code) DATE Commander, U.S. Army Aviation and Missile Command ATTN: AMSAM-MMC-MA-NP Redstone Arsenal, AL PART II -- REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS PUBLICATION NUMBER DATE TITLE PAGE COLM LINE NATIONAL STOCK NUMBER REFERENCE FIGURE ITEM TOTAL OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION PART III -- REMARKS (Any general remarks or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.) TYPED NAME, GRADE OR TITLE TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION SIGNATURE USAPA V3.01

307 The Metric System and Equivalents Linear Measure Liquid Measure 1 centiliter = 10 milliters =.34 fl. ounce 1 centimeter = 10 millimeters =.39 inch 1 deciliter = 10 centiliters = 3.38 fl. ounces 1 decimeter = 10 centimeters = 3.94 inches 1 liter = 10 deciliters = fl. ounces 1 meter = 10 decimeters = inches 1 dekaliter = 10 liters = 2.64 gallons 1 dekameter = 10 meters = 32.8 feet 1 hectoliter = 10 dekaliters = gallons 1 hectometer = 10 dekameters = feet 1 kiloliter = 10 hectoliters = gallons 1 kilometer = 10 hectometers = 3,280.8 feet Square Measure Weights 1 sq. centimeter = 100 sq. millimeters =.155 sq. inch 1 centigram = 10 milligrams =.15 grain 1 sq. decimeter = 100 sq. centimeters = 15.5 sq. inches 1 decigram = 10 centigrams = 1.54 grains 1 sq. meter (centare) = 100 sq. decimeters = sq. feet 1 gram = 10 decigram =.035 ounce 1 sq. dekameter (are) = 100 sq. meters = 1,076.4 sq. feet 1 decagram = 10 grams =.35 ounce 1 sq. hectometer (hectare) = 100 sq. dekameters = 2.47 acres 1 hectogram = 10 decagrams = 3.52 ounces 1 sq. kilometer = 100 sq. hectometers =.386 sq. mile 1 kilogram = 10 hectograms = 2.2 pounds 1 quintal = 100 kilograms = pounds Cubic Measure 1 metric ton = 10 quintals = 1.1 short tons 1 cu. centimeter = 1000 cu. millimeters =.06 cu. inch 1 cu. decimeter = 1000 cu. centimeters = cu. inches 1 cu. meter = 1000 cu. decimeters = cu. feet Approximate Conversion Factors To change To Multiply by To change To Multiply by inches centimeters ounce-inches Newton-meters feet meters.305 centimeters inches.394 yards meters.914 meters feet miles kilometers meters yards square inches square centimeters kilometers miles.621 square feet square meters.093 square centimeters square inches.155 square yards square meters.836 square meters square feet square miles square kilometers square meters square yards acres square hectometers.405 square kilometers square miles.386 cubic feet cubic meters.028 square hectometers acres cubic yards cubic meters.765 cubic meters cubic feet fluid ounces milliliters 29,573 cubic meters cubic yards pints liters.473 milliliters fluid ounces.034 quarts liters.946 liters pints gallons liters liters quarts ounces grams liters gallons.264 pounds kilograms.454 grams ounces.035 short tons metric tons.907 kilograms pounds pound-feet Newton-meters metric tons short tons pound-inches Newton-meters Temperature (Exact) F Fahrenheit 5/9 (after Celsius C temperature subtracting 32) temperature

308 PIN:

309 This fine document... Was brought to you by me: Liberated Manuals -- free army and government manuals Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap watermarks and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends? I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on. I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines: <A HREF= Military and Government Manuals</A> Sincerely Igor Chudov Chicago Machinery Movers