* TM P TECHNICAL MANUAL SUSTAINMENT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR CROSS-DRIVE TRANSMISSION WITH CONTAINER

Transcription

1 * TM P TECHNICAL MANUAL SUSTAINMENT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A P/N (NSN ) (EIC N/A) * TM P, dated 13 February 2012, supersedes TM &P, dated 14 February 2006, including all changes. DISTRIBUTION STATEMENT A Approved for public release, distribution is unlimited. HEADQUARTERS, DEPARTMENT OF THE ARMY 13 FEBRUARY 2012

2

3 TM P LIST OF EFFECTIVE PAGES/WORK PACKAGES NOTE: The portion of text affected by the changes is indicated by a vertical line in the outer margins of the page. Changes to illustrations are indicated by miniature pointing hands. Changes to text are indicated by shaded areas/bars. Zero in the Change No. column indicates an original page or work package. Original 13 February 2012 Date of issue for original manual is: TOTAL NUMBER OF PAGES FOR FRONT AND REAR MATTER IS 18 AND TOTAL NUMBER OF WORK PACKAGES IS 42 CONSISTING OF THE FOLLOWING: Page/WP No. Change No. Page/WP No. Change No. Front Cover...0 i...0 ii blank...0 iii-iv...0 Chapter 1 title page...0 Blank...0 WP 0001 (6 pgs)...0 WP 0002 (4 pgs)...0 WP 0003 (4 pgs)...0 WP 0004 (4 pgs)...0 WP 0005 (4 pgs)...0 WP 0006 (4 pgs)...0 WP 0007 (4 pgs)...0 WP 0008 (4 pgs)...0 WP 0009 (4 pgs)...0 WP 0010 (4 pgs)...0 WP 0011 (4 pgs)...0 WP 0012 (4 pgs)...0 WP 0013 (4 pgs)...0 WP 0014 (4 pgs)...0 WP 0015 (4 pgs)...0 WP 0016 (4 pgs)...0 WP 0017 (4 pgs)...0 WP 0018 (4 pgs)...0 WP 0019 (4 pgs)...0 WP 0020 (4 pgs)...0 WP 0021 (4 pgs)...0 WP 0022 (4 pgs)...0 WP 0023 (4 pgs)...0 WP 0024 (4 pgs)...0 WP 0025 (4 pgs)...0 WP 0026 (4 pgs)...0 WP 0027 (4 pgs)...0 WP 0028 (4 pgs)...0 WP 0029 (4 pgs)...0 WP 0030 (4 pgs)...0 WP 0031 (4 pgs)...0 WP 0032 (4 pgs)...0 WP 0033 (4 pgs)...0 WP 0034 (4 pgs)...0 WP 0035 (4 pgs)...0 WP 0036 (4 pgs)...0 WP 0037 (4 pgs)...0 WP 0038 (2 pgs)...0 WP 0039 (2 pgs)...0 WP 0040 (2 pgs)...0 WP 0041 (10 pgs)...0 WP 0042 (12 pgs)...0 A/ Bblank

4

5 * TM P HEADQUARTERS, DEPARTMENT OF THE ARMY WASHINGTON, D.C., 13 FEBRUARY 2012 TECHNICAL MANUAL SUSTAINMENT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR CROSS-DRIVE TRANSMISSION WITH CONTAINER MODEL X200-4A P/N (NSN ) (EIC N/A) REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this publication. If you find any errors, or if you would like to recommend any improvements to the procedures in this publication, please let us know. The preferred method is to submit your DA Form 2028 (Recommended Changes to Publications and Blank Forms) through the Internet on the TACOM Unique Logistics Support Applications (TULSA) Web site. The Internet address is Access to all applications requires CAC authentication, and you must complete the Access Request form the first time you use it. The DA Form 2028 is located under the TULSA Applications on the left-hand navigation bar. Fill out the form and click on SUBMIT. Using this form on the TULSA Web site will enable us to respond more quickly to your comments and to better manage the DA Form 2028 program. You may also mail, , or fax your comments or DA Form 2028 directly to the U.S. Army TACOM Life Cycle Management Command. The postal mail address is U.S. Army TACOM Life Cycle Management Command, ATTN: AMSTA-LCL-MPP / TECH PUBS, MS 727, 6501 E. 11 Mile Road, Warren, MI The address is tacomlcmc.daform2028@us.army.mil. The fax number is DSN or Commercial (586) A reply will be furnished to you. CURRENT AS OF 9 DECEMBER 2011 * TM P, dated 13 February 2012, supersedes TM &P, dated 14 February 2006, including all changes. DISTRIBUTION STATEMENT A Approved for public release, distribution is unlimited. i/ii Blank

6

7 TM P TABLE OF CONTENTS WP Sequence No. Repair Parts and Special Tools List (RPSTL) Introduction... WP 0001 GROUP 0710 Cross-Drive Transmission with Container... WP 0002 GROUP 0710 Right Cover and Center Housing... WP 0003 GROUP 0710 Output Driven Gear and Drive Gear... WP 0004 GROUP 0710 Range Input Driven Gear and Drive Gear... WP 0005 GROUP 0710 Left Cover (Access Cover)... WP 0006 GROUP 0710 Bevel Gear and Input Housing... WP 0007 GROUP 0710 Converter Pump and Cover... WP 0008 GROUP 0710 Top Cover... WP 0009 GROUP 0710 Converter Pump Cover and Lockup Piston... WP 0010 GROUP 0710 Input Housing... WP 0011 GROUP 0710 Center Housing and Hydrostatic Pump and Motor... WP 0012 GROUP 0710 Bevel Gear and Bevel Gear Carrier... WP 0013 GROUP 0710 Oil Transfer Diaphragm and Input Pump Drive Gear... WP 0014 GROUP 0710 Left Cover and Output Shaft... WP 0015 GROUP 0710 Right Cover and Brake Apply Cam Shaft... WP 0016 GROUP 0713 Forward Clutch... WP 0017 GROUP 0713 First Clutch, Center Carrier, and Rear Carrier... WP 0018 GROUP 0713 Second and Third Clutch, Front Carrier, 4th and Reverse Clutch... WP 0019 GROUP 0714 Governor and Governor Body... WP 0020 GROUP 0714 G2 Backup Priority Valve... WP 0021 GROUP 0714 Lockup Valve (Valve Solenoid)... WP 0022 GROUP 0714 Control Valve... WP 0023 GROUP 0714 Push-Start Valve... WP 0024 GROUP 0721 Output Oil Pump... WP 0025 GROUP 0721 Scavenge and Input Pumps... WP 0026 GROUP 0721 Steer Control Assembly (S&T Dynamics Pump)... WP 0027 GROUP 0721 Motor Component Parts (S&T Dynamics Pump)... WP 0028 GROUP 0721 Manifold Component Parts (S&T Dynamics Pump)... WP 0029 GROUP 0721 Pump Component Parts (S&T Dynamics Pump)... WP 0030 iii

8 TM P TABLE OF CONTENTS - (Continued) WP Sequence No. GROUP 0721 Steer Control Assembly (Eaton Pump)... WP 0031 GROUP 0721 Motor Component Parts (Eaton Pump)... WP 0032 GROUP 0721 Manifold Component Parts (Eaton Pump)... WP 0033 GROUP 0721 Pump Component Parts (Eaton Pump)... WP 0034 GROUP 0726 Left Brake and Output Carrier... WP 0035 GROUP 0726 Right Brake and Output Carrier... WP 0036 GROUP 0726 Right Brake Apply Valve Body and Brake Coolant Valve Body... WP 0037 GROUP 9401 Repair Kits... WP 0038 GROUP 9501 Bulk Items List... WP 0039 GROUP 2604 Special Tools... WP 0040 National Stock Number Index... WP 0041 Part Number Index... WP 0042 iv

9 CHAPTER 1 REPAIR PARTS LIST FOR CROSS-DRIVE TRANSMISSION WITH CONTAINER, MODEL X200-4A

10

11 TM P 0001 SUSTAINMENT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INTRODUCTION INTRODUCTION SCOPE This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for performance of Sustainment Maintenance of the Cross-Drive Transmission with Container, Model X200-4A. It authorizes the requisitioning, issue, and disposition of spares, repair parts, and special tools as indicated by the Source, Maintenance, and Recoverability (SMR) codes. GENERAL In addition to the Introduction work package, this RPSTL is divided into the following work packages: 1. Repair Parts List Work Packages. Work packages containing lists of spares and repair parts authorized by this RPSTL for use in the performance of maintenance. These work packages also include parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in ascending f gure and item number sequence. Sending units, brackets, f lters, and bolts are listed with the component they mount on. Bulk materials are listed by item name in FIG. BULK at the end of the work packages. Repair parts kits are listed separately in their own functional group and work package. Repair parts for reparable special tools are also listed in a separate work package. Items listed are shown on the associated illustrations. 2. Special Tools List Work Packages. Work packages containing lists of special tools, special TMDE, and special support equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in the DESCRIPTION AND USABLE ON CODE (UOC) column). Tools that are components of common tool sets and/or Class VII are not listed. 3. Cross-Reference Indexes Work Packages. There are two cross-reference indexes work packages in this RPSTL: the National Stock Number (NSN) Index work package and the Part Number (P/N) Index work package. The National Stock Number Index work package refers you to the f gure and item number. The Part Number Index work package refers you to the f gure and item number. EXPLANATION OF COLUMNS IN THE REPAIR PARTS LIST WORK PACKAGES ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration. SMR CODE (Column (2)). The SMR code containing supply/requisitioning information, maintenance level authorization criteria, and disposition instruction, as shown in the following breakout. Table 1. SMR Code Explanation. Source Maintenance Recoverability Code Code Code XX XX X 3rd position: Who can 4th position: Who can do install, replace, or use the complete repair* on the item. item. 1st two positions: How to get an item. 5th position: Who determines disposition action on unserviceable items. *Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the "Repair" function in a use/user environment in order to restore serviceability to a failed item

12 TM P 0001 Source Code. The source code tells you how you get an item needed for maintenance, repair, or overhaul of an end item/equipment. Explanations of source codes follow: Source Code Application/Explanation PA PB PC PD PE PF PG PH PR PZ KD KF KB MF - Made at f eld level MH - Made at below depot/sustainment level ML - Made at SRA MD - Made at depot MG - Navy only AF - Assembled by f eld level AH - Assembled by below depot sustainment level AL - Assembled by SRA AD - Assembled by depot AG - Navy only XA XB XC XD NOTE Items coded PC are subject to deterioration. Stock items; use the applicable NSN to requisition/request items with these source codes. They are authorized to the level indicated by the code entered in the third position of the SMR code. Items with these codes are not to be requested/requisitioned individually. They are part of a kit which is authorized to the maintenance level indicated in the third position of the SMR code. The complete kit must be requisitioned and applied. Items with these codes are not to be requisitioned/requested individually. They must be made from bulk material which is identif ed by the part number in the DESCRIPTION AND USABLE ON CODE (UOC) column and listed in the bulk material group work package of the RPSTL. If the item is authorized to you by the third position code of the SMR code, but the source code indicates it is made at higher level, order the item from the higher level of maintenance. Items with these codes are not to be requested/requisitioned individually. The parts that make up the assembled item must be requisitioned or fabricated and assembled at the level of maintenance indicated by the source code. If the third position of the SMR code authorizes you to replace the item, but the source code indicates the item is assembled at a higher level, order the item from the higher level of maintenance. Do not requisition an XA-coded item. Order the next higher assembly. (Refer to NOTE below.) If an item is not available from salvage, order it using the CAGEC and part number. Installation drawings, diagrams, instruction sheets, f eld service drawings; identif ed by manufacturer s part number. Item is not stocked. Order an XD-coded item through local purchase or normal supply channels using the CAGEC and part number given, if no NSN is available

13 TM P 0001 NOTE Cannibalization or controlled exchange, when authorized, may be used as a source of supply for items with the above source codes except for those items source coded "XA" or those aircraft support items restricted by requirements of AR Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to use and repair support items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows: Third Position. The maintenance code entered in the third position tells you the lowest maintenance level authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to the following levels of maintenance: Maintenance Code Application/Explanation F - Field maintenance can remove, replace, and use the item. H- Below Depot Sustainment maintenance can remove, replace, and use the item. L- Specialized repair activity can remove, replace, and use the item. G- Af oat and ashore intermediate maintenance can remove, replace, and use the item (Navy only). K- Contractor facility can remove, replace, and use the item. Z - Item is not authorized to be removed, replaced, or used at any maintenance level. D - Depot can remove, replace, and use the item. *NOTE - Army may use C in the third position. However, for joint service publications, Army will use O. Fourth Position. The maintenance code entered in the fourth position tells you whether or not the item is to be repaired and identif es the lowest maintenance level with the capability to do complete repair (perform all authorized repair functions). NOTE Some limited repair may be done on the item at a lower level of maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes. Maintenance Code Application/Explanation F- Field is the lowest level that can do complete repair of the item. H- Below Depot Sustainment is the lowest level that can do complete repair of the item. L- Specialized repair activity (enter specialized repair activity or TASMG designator) is the lowest level that can do complete repair of the item. D- Depot is the lowest level that can do complete repair of the item. G- Bothaf oat and ashore intermediate levels are capable of complete repair of item. (Navy only). K- Complete repair is done at contractor facility. Z - Nonreparable. No repair is authorized. B- No repair is authorized. No parts or special tools are authorized for maintenance of B-coded items. However, the item may be reconditioned by adjusting, lubricating, etc., at the user level

14 TM P 0001 Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on unserviceable items. The recoverability code is shown in the f fth position of the SMR code as follows: Recoverability Code Application/Explanation Z- Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in the third position of the SMR code. F- Reparable item. When uneconomically reparable, condemn and dispose of the item at the f eld level. H- Reparable item. When uneconomically reparable, condemn and dispose of the item at the below depot sustainment level. D - Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of item are not authorized below depot level. L- Reparable item. Condemnation and disposal not authorized below Specialized Repair Activity (SRA). A- Item requires special handling or condemnation procedures because of specif c reasons (such as precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specif c instructions. G - Filed level reparable item. Condemn and dispose at either af oat or ashore intermediate levels. (Navy only) K- Reparable item. Condemnation and disposal to be performed at contractor facility. NSN (Column (3)). The NSN for the item is listed in this column. CAGEC (Column (4)). The Commercial and Government Entity Code (CAGEC) is a f ve-digit code which is used to identify the manufacturer, distributor, or Government agency/activity that supplies the item. PART NUMBER (Column (5)). Indicates the primary number used by the manufacturer (individual, company, f rm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specif cations, standards, and inspection requirements to identify an item or range of items. NOTE When you use an NSN to requisition an item, the item you receive may have a different part number from the number listed. DESCRIPTION AND USABLE ON CODE (UOC) (Column (6)). This column includes the following information: 1. The federal item name, and when required, a minimum description to identify the item. 2. Part numbers of bulk materials are referenced in this column in the line entry to be manufactured or fabricated. 3. Hardness Critical Item (HCI). A support item that provides the equipment with special protection from electromagnetic pulse (EMP) damage during a nuclear attack. 4. The statement END OF FIGURE appears just below the last item description in column (6) for a given f gure in both the repair parts list work packages. QTY (Column (7)). The QTY (quantity per f gure) column indicates the quantity of the item used in the breakout shown on the illustration/f gure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column instead of a quantity indicates that the quantity is variable and quantity may change from application to application

15 TM P 0001 EXPLANATION OF CROSS-REFERENCE INDEXES WORK PACKAGES FORMAT AND COLUMNS 1. National Stock Number (NSN) Index Work Package. NSNs in this index are listed in National Item Identification Number (NIIN) sequence. STOCK NUMBER Column. This column lists the NSN in NIIN sequence. The NIIN consists of the last nine digits of the NSN. When using this column to locate an item, ignore the f rst four digits of the NSN. However, the complete NSN should be used when ordering items by stock number. For example, if the NSN is , the NIIN is FIG. Column. This column lists the number of the f gure where the item is identif ed/located. The f gures are in numerical order in the repair parts list and special tools list work packages. ITEM Column. The item number identif estheitemassociatedwiththefgure listed in the adjacent FIG. column. This item is also identif ed by the NSN listed on the same line. 2. Part Number (P/N) Index Work Package. Part numbers in this index are listed in ascending alphanumeric sequence (vertical arrangement of letter and number combinations which places the f rstletterordigitofeach group in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order). PART NUMBER Column. Indicates the part number assigned to the item. FIG. Column. This column lists the number of the f gure where the item is identif ed/located in the repair parts list and special tools list work packages. ITEM Column. The item number is the number assigned to the item as it appears in the f gure referenced in the adjacent f gure number column. SPECIAL INFORMATION UOC. The UOC appears in the lower left corner of the Description Column heading. Usable on codes are shown as "UOC:..." in the Description Column (justif ed left) on the f rst line under the applicable item/nomenclature. Uncoded items are applicable to all models. Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material functional group of this RPSTL. Part numbers for bulk material are also referenced in the Description Column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be manufactured or fabricated are found in TM Index Numbers. Items which have the word BULK in the f gure column will have an index number shown in the item number column. This index number is a cross-reference between the NSN / Part Number (P/N) Index work packages and the bulk material list in the repair parts list work package. Associated Publications. The publication listed below pertains to the X200-4A Transmission: Publication TM Short Title Sustainment Maintenance Manual for Cross-Drive Transmission with Container

16 TM P 0001 HOW TO LOCATE REPAIR PARTS 1. When NSNs or Part Numbers Are Not Known. First. Using the table of contents, determine the assembly group to which the item belongs. This is necessary since f gures are prepared for assembly groups and subassembly groups, and lists are divided into the same groups. Second. Find the f gure covering the functional group or the subfunctional group to which the item belongs. Third. Identify the item on the f gure and note the number(s). Fourth. Look in the repair parts list work packages for the f gure and item numbers. The NSNs and part numbers are on the same line as the associated item numbers. 2. When NSN Is Known. First. If you have the NSN, look in the STOCK NUMBER column of the NSN index work package. The NSN is arranged in NIIN sequence. Note the f gure and item number next to the NSN. Second. Turn to the f gure and locate the item number. Verify that the item is the one you are looking for. 3. When Part Number Is Known. First. If you have the part number and not the NSN, look in the PART NUMBER column of the part number index work package. Identify the f gure and item number. Second. Look up the item on the f gure in the applicable repair parts list work package. ABBREVIATIONS Abbreviation Explanation BOI CAGEC EMP FIG(S) HCI MAC MACH NIIN NO(S). NSN PG(S) P/N QTY RPSTL SMR SRA TMDE UOC V WP Basis Of Issue Commercial And Government Entity Code Electromagnetic Pulse Figure(s) Hardness Critical Item Maintenance Allocation Chart Machining National Item Identif cation Number Number(s) National Stock Number Page(s) Part Number Quantity Repair Parts and Special Tools List Source, Maintenance, and Recoverability Specialized Repair Activity Test, Measurement, and Diagnostic Equipment Usable On Code Variable Work Package For standard abbreviations, see ASME Y14.38M, Abbreviations and Acronyms

17 TM P 0002 SUSTAINMENT MAINTENANCE CROSS-DRIVE TRANSMISSION WITH CONTAINER

18 TM P 0002 Figure 1. Cross-Drive Transmission with Container

19 TM P 0002 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Cross-Drive Transmission with Container. QTY 1 PAFHD CTX200X4A XAFHD TRANSMISSION, X200-4A... 1 (SEE FIGS 2 THROUGH 8 FOR COMPONENT PARTS) END OF FIGURE /4 blank

20

21 TM P 0003 SUSTAINMENT MAINTENANCE RIGHT COVER AND CENTER HOUSING

22 TM P 0003 Figure 2. Right Cover and Center Housing

23 TM P 0003 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Right Cover and Center Housing. QTY 1 PAHZZ BOLT, MACHINE PAFZZ WASHER, FLAT PAHDD COVER, TRANSMISSION... 1 (SEE FIGS 15, 34, AND 35 FOR COMPONENT PARTS) 4 PAHZZ GASKET AHHHD HOUSING ASSEMBLY, CENTER 1 COMPONENT... (SEE FIGS 11, 16 THROUGH 21, AND 33 FOR COMPONENT PARTS) 6 PAHZZ BOLT, MACHINE END OF FIGURE /4 blank

24

25 TM P 0004 SUSTAINMENT MAINTENANCE OUTPUT DRIVEN GEAR AND DRIVE GEAR

26 TM P 0004 Figure 3. Output Driven Gear and Drive Gear

27 TM P 0004 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Output Driven Gear and Drive Gear. QTY 1 PAHZZ BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR, SPUR PAHZZ M084 BS BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR, SPUR PAHZZ O-RING PAHZZ TUBE, METALLIC PAHZZ O-RING... 1 (PARTOFASSEMBLY P/N ) 8 PAHZZ RING, SNAP PAHZZ SHAFT, STRAIGHT PAHZZ M084 BS BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR, SPUR PAHZZ TUBE, METALLIC PAHZZ STRAINER ELEMENT, SEDIMENT PAHZZ O-RING PAHZZ TUBE, METALLIC PAHZZ DIAPHRAGM, EQUALIZER PAHZZ RETAINER, PACKING PAHZZ PISTON AND PIN ASSEMBLY PAHZZ VALVE, RESERVOIR EQUALIZER PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ HOUSING, SPRING-EQUALIZER VALVE 1 22 PAHZZ WASHER, FLAT PAHZZ SCREW, CAP, HEXAGON HEAD PAHZZ O-RING PAHZZ TUBE, METALLIC... 1 END OF FIGURE /4 blank

28

29 TM P 0005 SUSTAINMENT MAINTENANCE RANGE INPUT DRIVEN GEAR AND DRIVE GEAR

30 TM P 0005 Figure 4. Range Input Driven Gear and Drive Gear

31 TM P 0005 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Range Input Driven Gear and Drive Gear. QTY 1 PAHZZ M83248/1-217 O-RING PAHZZ BEARING, WASHER, THRUST AHHHH CLUTCH ASSEMBLY, FORWARD... 1 (SEE FIG 16 FOR COMPONENT PARTS) 4 PAHZZ GEAR, SPUR PAHZZ BEARING, ROLLER, CYLINDRICAL PAHZZ PITOT, TRANSMISSION PAHZZ SCREW, CAP, SOCKET HEAD PAHZZ SHAFT, SHOULDERED PAHZZ BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR, SPUR PAHZZ GEAR, SPUR PAHZZ O-RING PAHZZ COUPLING, TUBE PAHZZ COUPLING, TUBE... 1 END OF FIGURE /4 blank

32

33 TM P 0006 SUSTAINMENT MAINTENANCE LEFT COVER (ACCESS COVER)

34 TM P 0006 Figure 5. Left Cover (Access Cover)

35 TM P 0006 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Left Cover (Access Cover). QTY 1 PAHZZ NON-ASBESTOS GASKET AHHDD COVER ASSEMBLY, LEFT... (SEE FIGS 14 AND 25 FOR COMPONENT PARTS) 3 PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE END OF FIGURE /4 blank

36

37 TM P 0007 SUSTAINMENT MAINTENANCE BEVEL GEAR AND INPUT HOUSING

38 TM P 0007 Figure 6. Bevel Gear and Input Housing

39 TM P 0007 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Bevel Gear and Input Housing. QTY 1 AHHHH BEVEL GEAR ASSEMBLY... (SEE FIGS 12, 13, 22, 23, AND 24 FOR COMPONENT PARTS) 2 PAHZZ GASKET PAHZZ GASKET PAHZZ PACKING, PREFORMED PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHHH HOUSING, MECHANICAL... 1 (SEE FIG 10 FOR COMPONENT PARTS) 8 PAHZZ BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ SCREW, CAP, HEXAGON HEAD... 9 END OF FIGURE /4 blank

40

41 TM P 0008 SUSTAINMENT MAINTENANCE CONVERTER PUMP AND COVER

42 TM P 0008 Figure 7. Converter Pump and Cover

43 TM P 0008 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Converter Pump and Cover. QTY 1 PAHZZ NON-ASBESTOS GASKET PAHZZ TORQUE CONVERTER, VEHICULAR PAHZZ PLATE, RETAINING, BEARING PAHZZ LOCKING PLATE, NUT AND BOLT PAHZZ SCREW, CAP, HEXAGON HEAD PAHZZ RING, RETAINING PAHZZ STATOR, TORQUE CONVERTER PAHZZ WASHER, CAM ROLLER PAHZZ BEARING, WASHER, THRUST PAHZZ CAM, TRANSMISSION STATOR PAHZZ ROLLER, BEARING PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ ROLLER, LINEAR-ROTARY MOTION PAHZZ NTA3650 RETAINER AND ROLLER PAHZZ TRD3648 SEAT, BEARING PAHZZ DISK, CLUTCH PAHZZ TURBINE ASSEMBLY, TRANSMISSION PAHZZ RING, RETAINING PAHZZ GASKET PAHZZ RETAINER, CLUTCH PLATE, TRANSMISSION PAHZZ CLUTCH HALF, POSITIVE, VEHICULAR 1 22 AHHHH COVER ASSEMBLY, CONVERTER PUMP... (SEE FIG 9 FOR COMPONENT PARTS) 23 PAHZZ MS21044N5 NUT, SELF-LOCKING, HEXAGON END OF FIGURE /4 blank

44

45 TM P 0009 SUSTAINMENT MAINTENANCE TOP COVER

46 TM P 0009 Figure 8. Top Cover

47 TM P 0009 ITEM NO. SMR NSN CAGEC PART NO. GROUP DESCRIPTION AND USABLE ON CODE (UOC) FIGURE TRANSMISSION ASSEMBLY Top Cover. QTY 1 PAHZZ GASKET PAHHH COVER, ACCESS PAHZZ SEAL, PLAIN ENCASED PAHZZ EXTENSION, PUSH ROD PAHZZ PIN, SPRING XBHZZ PIN, STRAIGHT, HEADLESS PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ CAP, LINEAR ACTUATING CYLINDER. 1 9 XAHZZ COVER, TRANSMISSION TOP PAHZZ SEAL, PLAIN ENCASED PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE END OF FIGURE /4 blank

48

49 TM P 0010 SUSTAINMENT MAINTENANCE CONVERTER PUMP COVER AND LOCKUP PISTON

50 TM P 0010 Figure 9. Converter Pump Cover and Lockup Piston

51 TM P 0010 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Converter Pump Cover and Lockup Piston. QTY 1 PAHZZ RING, RETAINING PAHZZ PISTON, CLUTCH SHAFT PAHZZ O-RING PAHZZ RETAINER, PACKING PAHZZ SEAL RING, TRANSMISSION PAHDD COVER ASSEMBLY, PUMP PADZZ BEARING, SLEEVE XAHZZ COVER ASSEMBLY, MACHINE... 1 END OF FIGURE /4 blank

52

53 TM P 0011 SUSTAINMENT MAINTENANCE INPUT HOUSING

54 TM P 0011 Figure 10. Input Housing

55 TM P 0011 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Input Housing. QTY 1 PAHZZ BUSHING BLANK XAHZZ HOUSING, INPUT, LEFT... (SEE FIG 6 FOR NEXTHIGHER ASSEMBLY) 3 PAHZZ PLUG, PIPE PAHZZ SEAL, PLAIN ENCASED... 1 END OF FIGURE /4 blank

56

57 TM P 0012 SUSTAINMENT MAINTENANCE CENTER HOUSING AND HYDROSTATIC PUMP AND MOTOR

58 TM P 0012 Figure 11. Center Housing and Hydrostatic Pump and Motor

59 TM P 0012 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0710 TRANSMISSION ASSEMBLY FIGURE 11 Center Housing and Hydrostatic Pump and Motor. QTY 1 PAHZZ MS BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ O-RING PAHZZ TUBE ASSEMBLY, METAL PAHZZ O-RING PAHZZ BOLT, MACHINE PAHZZ PLATE, RETAINING, BEARING PAHZZ M084 BS BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR, SPUR PAHZZ RING, RETAINING PAHZZ GEAR, SPUR PAHDD PUMP UNIT, AXIAL PISTONS... 1 (S&T DYNAMICS PUMP SEE FIGS 26, 27, 28, 29 FOR COMPONENT PARTS) (EATON PUMP SEE FIGS 30, 31, 32, 33 FOR COMPONENT PARTS) 13 PAHZZ GEAR, SPUR PAHZZ M084 BS BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR, SPUR PAHZZ WASHER, FLAT PAHHH HOUSING, MECHANICAL PAHZZ PIN, STRAIGHT, HEADLESS PAHZZ SLEEVE, OIL TRANSFER PAHZZ SPACER, SLEEVE PAHZZ PLUG, PIPE PAHZZ PLUG, PIPE... 5 (PRESSURE PORT, C3, C4, C5, G2, AND LUBE) 23 PAHZZ BEARING, WASHER, THRUST PAHZZ BEARING, ROLLER, NEEDLE PAHZZ PIN, STRAIGHT, HEADLESS PAHZZ PIN, STRAIGHT, HEADLESS PAHZZ PIN, STRAIGHT, HEADLESS XAHDD HOUSING CENTER MACHINING PAHZZ INSERT, SCREW THREAD PAHZZ INSERT, SCREW THREAD XAHZZ HOUSING, CENTER PAHZZ INSERT, SCREW THREAD PAHZZ INSERT, SCREW THREAD... 5 END OF FIGURE /4 blank

60

61 TM P 0013 SUSTAINMENT MAINTENANCE BEVEL GEAR AND BEVEL GEAR CARRIER

62 TM P 0013 Figure 12. Bevel Gear and Bevel Gear Carrier

63 TM P 0013 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0710 TRANSMISSION ASSEMBLY FIGURE 12 Bevel Gear and Bevel Gear Carrier. QTY 1 PAHDD CARRIER HOUSING ASSEMBLY PADDD HOUSING, MECHANICAL PADZZ PIN, STRAIGHT, HEADLESS PADZZ B-1210-OH.. BEARING, ROLLER, NEEDLE PADZZ PLUG, PIPE XADZZ CARRIER, BEVEL GEAR PADZZ PIN,STRAIGHT, HEADLESS PADZZ PLUG, PIPE PADZZ SPACER, SLEEVE PADZZ SPRING, HELICAL, COMPRESSION PADZZ SPRING,HELICAL,COMPRESSION PAHHH COVER ASSEMBLY, VALVE XADZZ PIN,STRAIGHT, HEADLESS XADZZ COVER, CHECK VALVE PADZZ WASHER, FLAT PADZZ BOLT, MACHINE PADZZ GUIDE, TRANSMISSION PADZZ SPRING,HELICAL,COMPRESSION PADZZ HUB, TRANSMISSION PADZZ PIN, STRAIGHT, HEADED PADZZ SPRING,HELICAL,COMPRESSION PADZZ PIN, STRAIGHT, HEADED PADZZ BEARING, ROLLER, TAPERED PADZZ SHIM... V 25 PADZZ SHIM... V 26 PADZZ SHIM... V 27 PADZZ SPACER, PLATE... V 28 PADZZ PLATE, RETAINING, BEARING PADZZ WASHER, FLAT PADZZ MS BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ MS BOLT, MACHINE PADZZ GEAR SET, BEVEL, MATCHED PADZZ DS BEARING, ROLLER, TAPERED PADZZ PLATE, RETAINING, BEARING PADZZ RING, RETAINING PADZZ DS BEARING, ROLLER, TAPERED PADZZ SHIM... V 39 PADZZ SHIM... V 40 PADZZ SHIM... V 41 PADZZ SPACER, PLATE... V 42 PADZZ O-RING PADZZ PLATE, RETAINING, BEARING PADZZ WASHER, FLAT PADZZ BOLT, MACHINE

64 TM P 0013 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) 46 PADZZ RETAINER, PACKING PADZZ SHIM... V 48 PADZZ SHIM... V 49 PADZZ SHIM... V 50 PADZZ SPACER, RING... V 51 PADZZ DS BEARING, ROLLER, TAPERED PADZZ NUT, PLAIN, ROUND PADZZ SHAFT, SHOULDERED... 1 END OF FIGURE QTY

65 TM P 0014 SUSTAINMENT MAINTENANCE OIL TRANSFER DIAPHRAGM AND INPUT PUMP DRIVE GEAR

66 TM P 0014 Figure 13. Oil Transfer Diaphragm and Input Pump Drive Gear

67 TM P 0014 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0710 TRANSMISSION ASSEMBLY FIGURE 13 Oil Transfer Diaphragm and Input Pump Drive Gear. QTY 1 PAHZZ SCREW, CAP, HEXAGON HEAD PAHZZ WASHER, FLAT PAHZZ CLAMP, LOOP PAHZZ TUBE ASSEMBLY, METAL PAHZZ NIPPLE, TUBE PAHZZ ELBOW, TUBE-TO-BOSS PAHZZ O-RING PADZZ CLAMP, LOOP PAHZZ SEAL RING, METAL PAHDD DIAPHRAGM ASSEMBLY PADZZ SCREW, MACHINE PADZZ SPACER, PLATE PADZZ PIN, STRAIGHT, HEADLESS PADZZ DIAPHRAGM, OIL TRANSFER PADZZ GEARSHAFT, SPUR PAHZZ WASHER, FLAT PAHZZ MS BOLT, MACHINE PAHZZ PACKING, PREFORMED PAHZZ GEAR, SPUR PAHZZ BEARING, BALL, ANNULAR PAHZZ SPACER, PLATE PAHZZ RING, RETAINING... 1 END OF FIGURE /4 blank

68

69 TM P 0015 SUSTAINMENT MAINTENANCE LEFT COVER AND OUTPUT SHAFT

70 TM P 0015 Figure 14. Left Cover and Output Shaft

71 TM P 0015 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE TRANSMISSION ASSEMBLY Left Cover and Output Shaft. QTY 1 PADZZ COVER, ACCESS PAHZZ PLUG, PIPE PAHZZ PLUG, PIPE PADZZ COVER, SLEEVE PAFZZ SEAL, PLAIN ENCASED PADZZ WASHER, FLAT PADZZ BOLT, MACHINE XADDD COVER ASSEMBLY, END MACHINE PADZZ INSERT, SCREW THREAD XADZZ COVER, LEFT PAZZH INSERT, SCREW THREAD PADZZ REDUCER, TUBE PAHZZ LINER, BEARING HOUSING PAHZZ BEARING, BALL, ANNULAR PAHZZ RING, RETAINING PAHZZ SHAFT, SHOULDERED PAHZZ RETAINER, PACKING PAHZZ RETAINER, PACKING PAHZZ RETAINER, PACKING PAHZZ SEAL, NONMETALLIC ROUND SECTION 1 21 PADZZ TUBE ASSEMBLY, METAL PADZZ BOLT... 3 END OF FIGURE /4 blank

72

73 TM P 0016 SUSTAINMENT MAINTENANCE RIGHT COVER AND BRAKE APPLY CAM SHAFT

74 TM P 0016 Figure 15. Right Cover and Brake Apply Cam Shaft

75 TM P 0016 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0710 TRANSMISSION ASSEMBLY FIGURE 15 Right Cover and Brake Apply Cam Shaft. QTY 1 PAHHH SHAFT, SHOULDERED XAHZZ SHAFT, BRAKE APPLY, LEFT XAHZZ PIN, SPRING PAHZZ WASHER, FLAT PAHZZ RING, RETAINING PAHZZ SPRING, HELICAL, TORSION PAHZZ CAM, CONTROL PAHZZ PIN, SPRING PAHZZ LINK, BRAKE ADJUSTING PAHZZ LINK, BRAKE ADJUSTING PAHZZ NUT, SELF-LOCKING, HEXAGON PAHZZ SPACER, SLEEVE PAHZZ CAM FOLLOWER, NEEDLE BEARING PAHZZ WASHER, FLAT PAHZZ M084 BS BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR, SPUR PAHZZ BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR, SPUR PAHZZ BEARING, WASHER, THRUST PAHZZ MS PIN, SPRING PAHZZ PLATE, RETAINING, SHAFT PAHZZ BOLT, MACHINE PAHZZ LINER, BEARING HOUSING PAHHH COVER ASSEMBLY, SLOTTED HUB END... (SEE FIG 2 FOR NEXT HIGHER ASSEMBLY) 25 PAHZZ PLUG, PIPE... (PRESSURE PORT, LUBE) 26 PAHZZ PLUG, PIPE PAHZZ BEARING, ROLLER, NEEDLE PAHZZ WW-P-471ACABCC. PLUG, PIPE... (PRESSURE PORT, MAIN) 29 PAHZZ BUSHING BLANK PAHZZ PIN, STRAIGHT, HEADLESS PAHZZ PIN, STRAIGHT, HEADLESS XAHDD COVER ASSEMBLY, RIGHT PAHZZ INSERT, SCREW THREAD XAHZZ COVER, RIGHT PAHZZ SLEEVE, COVER... 1 END OF FIGURE /4 blank

76

77 TM P 0017 SUSTAINMENT MAINTENANCE FORWARD CLUTCH

78 TM P 0017 Figure 16. Forward Clutch

79 TM P 0017 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE INTERMEDIATE CLUTCH Forward Clutch. QTY 1 PAHZZ RING, RETAINING PAHZZ CLUTCH ASSEMBLY, FRICTION... 1 (FORWARD CLUTCH BACKING PLATE) 3 PAHZZ DISK, CLUTCH PAHZZ DISK, CLUTCH PAHZZ HUB, TRANSMISSION PAHZZ BEARING, WASHER, THRUST PAHZZ RING, RETAINING PBHZZ HOLDER, SPRING PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ CLUTCH, POSITIVE... 1 (FORWARD CLUTCH POSITION) 11 PAHZZ SEAL, PLAIN PAHZZ SEAL, PLAIN PAHDD HOUSING, MECHANICAL PADZZ BEARING, SLEEVE XADZZ BALL XADZZ HOUSING AND RING ASSEMBLY... 1 END OF FIGURE /4 blank

80

81 TM P 0018 SUSTAINMENT MAINTENANCE FIRST CLUTCH, CENTER CARRIER, AND REAR CARRIER

82 TM P 0018 Figure 17. First Clutch, Center Carrier, and Rear Carrier

83 TM P 0018 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0713 INTERMEDIATE CLUTCH FIGURE 17 First Clutch, Center Carrier, and Rear Carrier. QTY 1 PAHZZ GEAR, HELICAL PAHZZ RING, RETAINING PAHZZ L X4 BEARING, BALL, ANNULAR PAHZZ RING, RETAINING PAHZZ SEAL, PLAIN PAHZZ PISTON, TRANSMISSION CLUTCH PAHZZ SEAL, TRANSMISSION CLUTCH PAHZZ SPRING, PISTON RELEASE PAHZZ RETAINER, PISTON SPRING PAHZZ RING, RETAINING PAHZZ CARRIER, GEAR ASSEMBLY... 1 (USE WITH GEAR SET, BEVEL, MATCHED, P/N ) 12 KDDZZ SHAFT, STRAIGHT XADDD CARRIER, REAR XADZZ CARRIER KDDZZ BUSHING, SLEEVE KDDZZ SEAT, BEARING KDDZZ BEARING, WASHER, THRUST KDDZZ BEARING, ROLLER, NEEDLE KDDZZ PINION ASSEMBLY, MATCHED PAHZZ DISK, CLUTCH PAHZZ DISK, CLUTCH PAHZZ GEAR, INTERNAL PAHZZ PLATE, INTERMEDIATE PAHZZ RING, RETAINING PAHZZ ST4M RETAINER AND ROLLER PAHZZ SEAT, BEARING PAHZZ RING, RETAINING PAHZZ GEAR, SPUR PAHZZ RING, RETAINING PAHZZ BRAKE DRUM PAHZZ SHAFT, SHOULDERED PAHZZ GEAR, INTERNAL PAHZZ BEARING, WASHER, THRUST PAHZZ RING, RETAINING PAHDD GEAR CLUSTER PADZZ BEARING, SLEEVE XADZZ GEAR, CENTER SUN PAHZZ CARRIER ASSEMBLY... 1 (CENTER) 39 XADZZ PIN XAHZZ CARRIER, CENTER XADZZ BEARING, WASHER, THRUST (BRONZE) (PLACE NEXT TO CARRIER)

84 TM P 0018 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) 42 XADZZ SEAT, BEARING XADZZ Q8308. ROLLER, BEARING XADZZ PINION ASSEMBLY, MATCHED... (4 GEARS, P/N ) 45 PAHZZ HOUSING, MECHANICAL PAHZZ SEAL, PLAIN PAHZZ SEAL, AIR, GAS TURBINE PAHZZ PISTON... (2ND CLUTCH PISTON) 49 PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ RING, SPRING RETAINER PAHZZ PUSH-ON NUT... 4 END OF FIGURE QTY

85 TM P 0019 SUSTAINMENT MAINTENANCE SECOND AND THIRD CLUTCH, FRONT CARRIER, 4TH AND REVERSE CLUTCH

86 TM P 0019 Figure 18. Second and Third Clutch, Front Carrier, 4th and Reverse Clutch

87 TM P 0019 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0713 INTERMEDIATE CLUTCH FIGURE 18 Second and Third Clutch, Front Carrier, 4th and Reverse Clutch. QTY 1 PAHZZ RING, RETAINING... V 1 PAHZZ RING, RETAINING... V 1 PAHZZ RING, RETAINING... V 1 PAHZZ RING, RETAINING... V 2 PAHZZ DISK, CLUTCH PAHZZ DISK, CLUTCH PAHZZ BEARING, WASHER, THRUST PAHZZ GEAR, INTERNAL PAHZZ RING, RETAINING PAHHD CARRIER ASSEMBLY, FRONT XADZZ FLANGE AND CARRIER KDDZZ SHAFT, STRAIGHT KDDZZ BEARING, WASHER, THRUST... 8 BRONZE (PLACE NEXT TO CARRIER) 11 KDDZZ WASHER, PIN THRUST KDDZZ Q8036. ROLLER, BEARING KDDZZ PINION ASSEMBLY, MATCHED... 1 (4 GEARS, P/N ) 14 PAHZZ RING, RETAINING PAHZZ HOUSING, MECHANICAL... 1 (3RD CLUTCH PISTON HOUSING, ALSO SERVES AS 2ND CLUTCH BACKING PLATE) 16 PAHZZ SEAL, AIR, GAS TURBINE PAHZZ SEAL, PLAIN PAHZZ PISTON... 1 (3RD CLUTCH PISTON) 19 PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ RING, SPRING RETAINER PAHZZ PUSH-ON NUT PAHZZ WASHER, THRUST PAHZZ SEAL RING, METAL AHHHH CLUTCH ASSEMBLY, FORWARD AND 1 REVERSE PAHDD HOUSING, FRICTION CLUTCH XAHZZ HOUSING, 4TH CLUTCH XADZZ BALL PADZZ BEARING, SLEEVE PAHZA SEAL, PLAIN PAHZA SEAL, PLAIN PAHZZ CLUTCH, POSITIVE... 1 (4TH AND REVERSE CLUTCH PISTON) 32 PAHZZ SPRING, HELICAL, COMPRESSION PBHZZ HOLDER, SPRING

88 TM P 0019 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) 34 PAHZZ RING, RETAINING PAHZZ DISK, CLUTCH PAHZZ DISK, CLUTCH PAHZZ PRESSURE PLATE ASSEMBLY PAHZZ RING, RETAINING PAHZZ BFBX PIN, STRAIGHT, HEADLESS PAHZZ DISK, CLUTCH... (3RD CLUTCH BACKING PLATE) 41 PAHZZ RING, RETAINING... 1 END OF FIGURE QTY

89 TM P 0020 SUSTAINMENT MAINTENANCE GOVERNOR AND GOVERNOR BODY

90 TM P 0020 Figure 19. Governor and Governor Body

91 TM P 0020 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE SERVO UNIT Governor and Governor Body. QTY 1 PAHZZ BODY ASSEMBLY, GOVERNOR PADZZ PIN, STRAIGHT, HEADLESS XAHZZ BODY, GOVERNOR XBDZZ PLUG, EXPANSION PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ STRAINER ELEMENT, SEDIMENT... 1 END OF FIGURE /4 blank

92

93 TM P 0021 SUSTAINMENT MAINTENANCE G2 BACKUP PRIORITY VALVE

94 TM P 0021 Figure 20. G2 Backup Priority Valve

95 TM P 0021 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE SERVO UNIT G2 Backup Priority Valve. QTY 1 PAHDD VALVE, LINEAR, DIRECT PADZZ SEAT, HELICAL COMPRESSION 1 SPRING... 3 PADZZ SPRING, HELICAL, COMPRESSION PADZZ VALVE, PRIORITY XADZZ BODY, PRIORITY VALVE PADZZ PIN, SPRING PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE PAHZZ VALVE BODY ASSEMBLY XADDD BODY ASSEMBLY, BACKUP PADZZ PLEA PLUG XADZZ BODY PBDZZ COVER, ACCESS PADZZ PLEA PLUG XADZZ COVER, ACCESS PADZZ SCREW, CAP, HEXAGON HEAD PADZZ WASHER, FLAT PADZZ SHAFT, STRAIGHT... 1 (VALVE, OVERRIDE) 20 PADZZ SLIDE, DIRECTIONAL CONTROL 1 LINEAR VALVE PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAH ZZ BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAH ZZ PLATE, SEPARATOR PAHZZ BOLT, MACHINE PAHZZ BA LL, BEARING PAHHH PLATE ASSEMBLY, OIL XAHZZ PLATE, OIL PAHZZ COVER, ACCESS... 1 (HOUSING) 32 PAHZZ BALL, BEARING PAHZZ VALVE, STOP-CHECK PAHZZ GASKET PAHZZ MS SCREW, MACHINE PAHHH WIRING HARNESS, BRANCHED PAHZZ TERMINAL, QUICK DISCONNECT PAHZZ NYLON INSULATOR PAHZZ L. TERMINAL, LUG PAHZZ GASKET... 1 END OF FIGURE /4 blank

96

97 TM P 0022 SUSTAINMENT MAINTENANCE LOCKUP VALVE (VALVE SOLENOID)

98 TM P 0022 Figure 21. Lockup Valve (Valve Solenoid)

99 TM P 0022 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE SERVO UNIT Lockup Valve (Valve Solenoid). QTY 1 PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE PAHDD VALVE, SOLENOID XADZZ BODY, LOCKUP CONTROL VALVE PADZZ PIN, SPRING PADZZ SEAL, NONMETALLIC ROUND 1 SECTION... 8 PADZZ WASHER, FLAT... V 9 XDDZZ SLEEVE, DIRECTIONAL CONTROL XDDZZ SLIDE, DIRECTIONAL CONTROL PADZZ O-RING XDDZZ WASHER, FLAT... V 13 XDDZZ PISTON, VALVE XDDZZ TRIMMER PLUG, TRANSMISSION PADZA SPRING PADZZ AX375 STOP, VALVE PADZZ SPRING, HELICAL, COMPRESSION... V 17 PADZZ SPRING, HELICAL, COMPRESSION... V (OPTIONAL FOR P/N ) 18 XDDZZ PLUG, VALVE PADZZ VALVE, SIGNAL CONTROL XDDZZ VALVE, SIGNAL PLUG PADZZ SPRING, HELICAL, COMPRESSION XDDZZ SLIDE, DIRECTIONAL CONTROL PADZZ PLUNGER, DETENT PADZZ SPRING, HELICAL, COMPRESSION... V 24 PADZZ SPRING, HELICAL, COMPRESSION... V (OPTIONAL FOR P/N ) 25 XDDZZ PLUG, VALVE, TRANSMISSION XDDZZ SLIDE, DIRECTIONAL CONTROL PADZZ GASKET PADDD COVER ASSEMBLY, PUSH PADZZ PLEA PLUG XADZZ COVER, LOCKUP VALVE PAHZZ BOLT, MACHINE PAHZZ SOLENOID, ELECTRICAL PAHZZ TERMINAL, QUICK DISCONNECT PAHZZ NYLON INSULATOR PAHZZ BOLT, MACHINE PADZZ WASHER, FLAT PADZZ BOLT, MACHINE... 2 END OF FIGURE /4 blank

100

101 TM P 0023 SUSTAINMENT MAINTENANCE CONTROL VALVE

102 TM P 0023 Figure 22. Control Valve

103 TM P 0023 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE SERVO UNIT Control Valve. QTY 1 PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE PAHDD VALVE ASSEMBLY, CONTROL PAHZZ SOLENOID, ELECTRICAL PAHZZ NYLON INSULATOR PAHZZ TERMINAL, QUICK DISCONNECT PAHZZ BOLT, MACHINE PADZZ BOLT, MACHINE PADZZ WASHER, FLAT PADZZ COVER, REAR-SHIFT VALVE PADZZ BOLT, MACHINE PADZZ PLATE, INTERMEDIATE, FRICTION 1 CLUTCH PADZZ PLATE, OIL TRANSFER PADZZ GASKET PAHZZ BOLT, MACHINE PAHZZ RETAINER, SPRING SPACER PADZZ CAP, VALVE... 1 (COVER) 20 XADZZ COVER, CONTROL VALVE PADZZ PLEA PLUG PADZZ GASKET PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE PADZZ BOLT, MACHINE PADZZ PLUG, VALVE, LOCKUP TIMER PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ SPRING, HELICAL, COMPRESSION PADZZ SPACER, PLATE... V 29 PADZZ SPACER, PLATE... V 29 PADZZ SPACER, PLATE... V 30 PADZZ SPRING, HELICAL, COMPRESSION PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ VALVE, SIGNAL PLUG PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ SPRING, HELICAL, COMPRESSION... V (OPTIONAL) 35 PADZZ SPRING, HELICAL, COMPRESSION... (OPTIONAL) 36 XDDZZ WASHER, FLAT... (OPTIONAL QTY 0 TO 5 WITH SPRING P/N ) 37 PADZZ PISTON, VALVE V V

104 TM P 0023 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) 38 PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ SPRING, HELICAL, COMPRESSION PADZZ BODY, VALVE PADZZ PLUG, SIGNAL, VALVE PADZZ PLUG, SIGNAL, VALVE PADZZ SPRING, HELICAL, COMPRESSION PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ PLUG, FORWARD REVERSE 1 TRANSMISSION PADZZ GASKET PBDZZ COVER, ACCESS PADZZ SPRING, HELICAL, COMPRESSION PADZZ SLIDE, DIRECTIONAL CONTROL XDDZZ PISTON, VALVE XDDZZ TRIMMER PLUG, TRANSMISSION PADZZ SPRING, HELICAL, COMPRESSION PADZZ AX375 PIN, STRAIGHT HEADLESS PADZZ VALVE, STOP-CHECK PADZZ SPRING, HELICAL, COMPRESSION PADZZ CAP, VALVE PADZZ GASKET... 1 END OF FIGURE QTY

105 TM P 0024 SUSTAINMENT MAINTENANCE PUSH-START VALVE

106 TM P 0024 Figure 23. Push-Start Valve

107 TM P 0024 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE SERVO UNIT Push-Start Valve. QTY 1 PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ SLIDE, DIRECTIONAL CONTROL PAHDD VALVE, CHECK XADZZ BODY, PUSH-START PADZZ SPRING, HELICAL, COMPRESSION PADZZ SPACER, SLEEVE XDDZZ PIN, STRAIGHT, HEADED PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE... 9 END OF FIGURE /4 blank

108

109 TM P 0025 SUSTAINMENT MAINTENANCE OUTPUT OIL PUMP

110 TM P 0025 Figure 24. Output Oil Pump

111 TM P 0025 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE COOLERS, PUMPS, MOTORS Output Oil Pump. QTY 1 PAHDD PUMP, OUTPUT OIL PADZZ NUT, SELF-LOCKING, HEXAGON PADZZ MS KEY, WOODRUFF PADZZ GEAR, SPUR PADDD COVER, HYDRAULIC, PUMP-MOTOR. 1 6 PADZZ STRAINER ELEMENT, SEDIMENT PADZZ BEARING, ROLLER, NEEDLE XADZZ COVER, OUT PUMP PADZZ PIN, STRAIGHT, HEADLESS PADZZ GEARSHAFT, SPUR PADZZ GEAR, SPUR PADZZ COVER, HYDRAULIC, PUMP-MOTOR PADZZ BEARING, ROLLER, NEEDLE XADZZ BODY, OUTPUT OIL PAHZZ WASHER, FLAT PAHZZ SCREW, CAP, HEXAGON HEAD PADZZ SCREW, CAP, HEXAGON HEAD PADZZ WASHER, FLAT PAHZZ WASHER, FLAT PAHZZ SCREW, CAP, HEXAGON HEAD... 2 END OF FIGURE /4 blank

112

113 TM P 0026 SUSTAINMENT MAINTENANCE SCAVENGE AND INPUT PUMPS

114 TM P 0026 Figure 25. Scavenge and Input Pumps

115 TM P 0026 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE COOLERS, PUMPS, MOTORS Scavenge and Input Pumps. QTY 1 PAHDD PUMP ASSEMBLY, SCAVENGE AND INPUT OIL... 2 PADZZ SCREW, CAP, HEXAGON HEAD PADZZ WASHER, FLAT PADZZ BOLT, MACHINE PFHDD COVER ASSEMBLY, PUMP, SCAVENGE 1 AND INPUT... 6 XADZZ COVER, SCAVENGE PADZZ B-1210-OH.. BEARING, ROLLER, NEEDLE PADZZ RING, TOLERANCE PADZZ RING, RETAINING PADZZ ROLLER, BEARING PADZZ GEAR, SPUR XADDD HOUSING ASSEMBLY, SCAVENGE PADZZ PIN, STRAIGHT, HEADLESS PADZZ PIN, STRAIGHT, HEADLESS XADZZ HOUSING, SCAVENGE AND INPUT 1 OIL PUMP PADZZ PIN, SPRING PADZZ SEAT, VALVE PADZZ DISK, VALVE PADZZ SPACER, SLEEVE PADZZ BUSHING, SLEEVE PADZZ SPRING,HELICAL,COMPRESSION XDDZZ COVER, HIGH-PRESSURE PAHZZ RING, RETAINING PAHZZ STRAINER ELEMENT, SEDIMENT PADZZ RING, RETAINING PADZZ CARTRIDGE, CHECK-VALVE PADZZ SPRING, HELICAL, COMPRESSION... V 27 PADZZ SPRING, HELICAL, COMPRESSION... V 28 PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ HOUSING, REVERSE BOOST PADZZ GEARSHAFT, SPUR PADZZ GEARSHAFT, SPUR PAHZZ MS KEY, WOODRUFF PAHZZ GEAR, SPUR PAHZZ NUT, SELF-LOCKING, HEXAGON PAHZZ BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ SCREW, CAP, HEXAGON HEAD PAHZZ TUBE AND FITTINGS, METALLIC PAHZZ BOLT, MACHINE... 2 END OF FIGURE /4 blank

116

117 TM P 0027 SUSTAINMENT MAINTENANCE STEER CONTROL ASSEMBLY (S&T DYNAMICS PUMP)

118 TM P 0027 Figure 26. Steer Control Assembly (S&T Dynamics Pump)

119 TM P 0027 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0721 COOLERS, PUMPS, MOTORS FIGURE 26 Steer Control Assembly (S&T Dynamics Pump). QTY 1 XADZZ 1YYX CONTROL ASSEMBLY, STEER KDDZZ 1YYX NUT, SELF-LOCKING, HEXAGON KDDZZ 1YYX WASHER, FLAT XADZZ 1YYX LEVER, REMOTE CONTROL XADZZ 1YYX BUSHING, SLEEVE XADZZ 1YYX SPRING, HELICAL, TORSION KDDZZ 1YYX WASHER, FLAT XADZZ 1YYX VALVE ASSEMBLY, SERVO KDDZZ 1YYX SCREW, CAP, HEXAGON HEAD XADZZ 1YYX HOUSING, CONTROL XADZZ 1YYX SHAFT, SHOULDERED KDDZZ 1YYX RING, RETAINING XADZZ 1YYX RETAINER ASSEMBLY, SEAL XADZZ 1YYX RETAINER, SEAL (MACH) KDDZZ 1YYX SEAL, LIP, PLATE ASSEMBLY KDDZZ 1YYX NUT, PLAIN, HEXAGON XADZZ 1YYX CLEVIS, ROD END XADZZ 1YYX PIN, GROOVED, HEADED KDDZZ 1YYX STUD, STEPPED XADZZ 1YYX SPRING, HELICAL, COMPRESSION XADZZ 1YYX CLEVIS, ROD END XADZZ 1YYX SLEEVE ASSEMBLY, VALVE KDDZZ 1YYX RING, RETAINING XADZZ 1YYX CONNECTOR, ROD END XADZZ 1YYX TUBE, TRANSFER XADZZ 1YYX STUD, PLAIN XADZZ 1YYX PISTON ASSEMBLY, PUMP KDDZZ 1YYX O-RING KDDZZ 1YYX RING, PISTON KDDZZ 1YYX WASHER, FLAT XADZZ 1YYX NUT, SELF-LOCKING, HEXAGON XADZZ 1YYX CYLINDER, SLEEVE XADZZ 1YYX COVER, ACCESS KDDZZ 1YYX WASHER, FLAT KDDZZ 1YYX NUT, SELF-LOCKING, HEXAGON KDDZZ 1YYX WASHER, FLAT KDDZZ 1YYX BOLT, SELF-LOCKING KDDZZ 1YYX BOLT, SELF-LOCKING XADZZ 1YYX SCREW, CAP, SOCKET HEAD... 2 END OF FIGURE /4 blank

120

121 TM P 0028 SUSTAINMENT MAINTENANCE MOTOR COMPONENT PARTS (S&T DYNAMICS PUMP)

122 TM P 0028 Figure 27. Motor Component Parts (S&T Dynamics Pump)

123 TM P 0028 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0721 COOLERS, PUMPS, MOTORS FIGURE 27 Motor Component Parts (S&T Dynamics Pump). QTY 1 XADZZ 1YYX SHAFT, SHOULDERED KDDZZ 1YYX BOLT, MACHINE XADZZ 1YYX PLATE, RETAINING, BEARING XADZZ 1YYX RING, RETAINING KDDZZ 1YYX BEARING, BALL, ANNULAR XADZZ 1YYX HEAD, HYDRAULIC MOTOR-PUMP XADZZ 1YYX PIN, SPRING XADZZ 1YYX BUSHING, SLEEVE XADZZ 1YYX FLANGE, MOUNTING XADZZ 1YYX PIN, STRAIGHT, HEADLESS XADZZ 1YYX PLUG, MACHINE THREAD KDDZZ 1YYX PLATE, CAM, PUMP XADZZ 1YYX PISTON ASSEMBLY KDDZZ 1YYX SPACER, SLEEVE KDDZZ 1YYX PLATE, PISTON, PUMP KDDZZ 1YYX CLIP, SPRING, TENSION KDDZZ 1YYX WASHER, KEY KDDZZ 1YYX BOLT KDDZZ 1YYX CYLINDER, ACTUATING, LINEAR KDDZZ 1YYX WASHER, FLAT KDDZZ 1YYX BOLT, MACHINE XADZZ 1YYX RETAINER, HELICAL COMPRESSION SPRING XADZZ 1YYX SPRING, STEERING, GEAR XADZZ 1YYX WASHER, FLAT KDDZZ 1YYX RING XADZZ 1YYX HOUSING, ASSEMBLY, MOTOR XADZZ 1YYX HOUSING, MOTOR (MACH) XADZZ 1YYX PIN, STRAIGHT, HEADLESS XADZZ 1YYX NAMEPLATE... 1 (SEE FIG 11 FOR NEXT HIGHER ASSEMBLY) 30 XADZZ 1YYX SCREW, DRIVE... (PROVIDED WITH NAMEPLATE) 31 KDDZZ 1YYX NUT, SELF-LOCKING, HEXAGON HEAD 6 END OF FIGURE /4 blank

124

125 TM P 0029 SUSTAINMENT MAINTENANCE MANIFOLD COMPONENT PARTS (S&T DYNAMICS PUMP)

126 TM P 0029 Figure 28. Manifold Component Parts (S&T Dynamics Pump)

127 TM P 0029 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0721 COOLERS, PUMPS, MOTORS FIGURE 28 Manifold Component Parts (S&T Dynamics Pump). QTY 1 XADZZ 1YYX PLUG, MACHINE THREAD KDDZZ 1YYX PACKING XADZZ 1YYX SPRING, SPECIAL XADZZ 1YYX PLUNGER, DETENT XADZZ 1YYX PLUG, PIPE XADZZ 1YYX BODY, PRESSURE CONTROL, TRANSMISSION... 7 XADZZ 1YYX PIN, STRAIGHT, HEADLESS XADZZ 1YYX SPRING, HELICAL, COMPRESSION KDDZZ 1YYX SLIDE, DIRECTIONAL CONTROL KDDZZ 1YYX SLEEVE, VALVE XADZZ 1YYX MANIFOLD ASSEMBLY XADZZ 1YYX MANIFOLD XADZZ 1YYX SETSCREW XADZZ 1YYX SETSCREW XADZZ 1YYX DISTRIBUTOR, CHARGE KDDZZ 1YYX PACKING, PREFORMED XADZZ 1YYX PLUG KDDZZ 1YYX BEARING, ROLLER, CYLINDRICAL XADZZ 1YYX PIN, STRAIGHT, HEADLESS KDDZZ 1YYX O-RING XADZZ 1YYX PLUG, MACHINE THREAD XADZZ 1YYX SEAT, HELICAL COMPRESSION SPRING XADZZ 1YYX SPRING, HELICAL, COMPRESSION XADZZ 1YYX KEY SET, SOCKET HEAD XADZZ 1YYX CAP, PRESSURE ADJUST KDDZZ 1YYX BOLT, SELF-LOCKING HEAD XADZZ 1YYX NUT, PLAIN, HEXAGON XADZZ 1YYX PLUG, MACHINE THREAD... 1 END OF FIGURE /4 blank

128

129 TM P 0030 SUSTAINMENT MAINTENANCE PUMP COMPONENT PARTS (S&T DYNAMICS PUMP)

130 TM P 0030 Figure 29. Pump Component Parts (S&T Dynamics Pump)

131 TM P 0030 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0721 COOLERS, PUMPS, MOTORS FIGURE 29 Pump Component Parts (S&T Dynamics Pump). QTY 1 XADZZ 1YYX HOUSING ASSEMBLY, PUMP XADZZ 1YYX HOUSING (MACH) XADZZ 1YYX STUD, PLAIN XADZZ 1YYX PIN, STRAIGHT, HEADLESS KDDZZ 1YYX BEARING, WASHER, THRUST XADZZ 1YYX CAM, CONTROL KDDZZ 1YYX BOLT, MACHINE KDDZZ 1YYX RING XADZZ 1YYX WASHER, FLAT XADZZ 1YYX SPRING, STEERING, GEAR XADZZ 1YYX RETAINER, HELICAL COMPRESSION SPRING KDDZZ 1YYX CYLINDER, ACTUATING, LINEAR KDDZZ 1YYX BOLT KDDZZ 1YYX CLIP, SPRING, TENSION KDDZZ 1YYX PLATE, PISTON, PUMP KDDZZ 1YYX SPACER, SLEEVE KDDZZ 1YYX PISTON ASSEMBLY KDDZZ 1YYX PLATE, CAM, PUMP XADZZ 1YYX CAM, CONTROL XADZZ 1YYX BEARING, ROLLER, CYLINDRICAL XADZZ 1YYX CAM (MACH) XADZZ 1YYX PIN, STRAIGHT, HEADLESS XADZZ 1YYX SHAFT, SHOULDERED KDDZZ 1YYX RING, RETAINING KDDZZ XYYX BEARING, BALL, ANNULAR XADZZ 1YYX FLANGE, MOUNTING KDDZZ 1YYX WASHER, FLAT KDDZZ 1YYX SCREW, CAP, HEXAGON HEAD XADZZ 1YYX RING, RETAINING... 1 END OF FIGURE /4 blank

132

133 TM P 0031 SUSTAINMENT MAINTENANCE STEER CONTROL ASSEMBLY (EATON PUMP)

134 TM P 0031 Figure 30. Steer Control Assembly (Eaton Pump)

135 TM P 0031 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0721 COOLERS, PUMPS, MOTORS FIGURE 30 Steer Control Assembly (Eaton Pump). QTY 1 ADDDD CONTROL ASSEMBLY, STEER PADZZ E9N NUT, SELF-LOCKING, HEXAGON PAHZZ WASHER, FLAT PADZZ DS LEVER, REMOTE CONTROL PADZZ BUSHING, SLEEVE PADZZ DS SPRING, HELICAL, TORSION PADZZ WASHER, FLAT PAHDD VALVE ASSEMBLY, SERVO PADZZ SCREW, CAP, HEXAGON HEAD PADZZ HOUSING, VEHICULAR STEERING 1 GEAR PADZZ SHAFT, SHOULDERED PADZZ RING, RETAINING PADDD RETAINER ASSEMBLY, SEAL XADZZ RETAINER, SEAL (MACH) PADZZ E9N SEAL, LIP, PLATE ASSEMBLY PADZZ DS NUT, PLAIN, HEXAGON PADZZ CLEVIS, ROD END PADZZ PIN, GROOVED, HEADED PADZZ STUD, STEPPED PADZZ DS SPRING, HELICAL, COMPRESSION PADZZ CLEVIS, ROD END PADZZ SLEEVE ASSEMBLY, VALVE PADZZ MS RING, RETAINING PADZZ DS CONNECTOR, ROD END PADZZ TUBE, TRANSFER PADZZ STUD, PLAIN PADZZ PISTON ASSEMBLY, PUMP PADZZ MS O-RING PADZZ DS RING, PISTON PADZZ WASHER, FLAT PADZZ NUT, SELF-LOCKING, HEXAGON PADZZ DS CYLINDER, SLEEVE PBDZZ COVER, ACCESS PADZZ WASHER, FLAT PADZZ NUT, SELF-LOCKING, HEXAGON PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE PAHZZ SCREW, CAP, SOCKET HEAD... 2 END OF FIGURE /4 blank

136

137 TM P 0032 SUSTAINMENT MAINTENANCE MOTOR COMPONENT PARTS (EATON PUMP)

138 TM P 0032 Figure 31. Motor Component Parts (Eaton Pump)

139 TM P 0032 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0721 COOLERS, PUMPS, MOTORS FIGURE 31 Motor Component Parts (Eaton Pump). QTY 1 PADZZ DS SHAFT, SHOULDERED PADZZ BOLT, MACHINE PADZZ PLATE, RETAINING, BEARING PADZZ RING, RETAINING PADZZ BEARING, BALL, ANNULAR PADDD HEAD, HYDRAULIC MOTOR-PUMP PADZZ PIN, SPRING XADZZ BUSHING, SLEEVE XADZZ FLANGE, MOUNTING PADZZ PIN, STRAIGHT, HEADLESS PADZZ PLUG, MACHINE THREAD PADZZ DS PLATE, CAM, PUMP PADZZ PISTON, CLUTCH SHAFT ASSEMBLY PADZZ SPACER, SLEEVE PADZZ PLATE, DAMPER, TRANSMISSION PADZZ CLIP, SPRING TENSION PADZZ WASHER, KEY PADZZ BOLT PADZZ DS CYLINDER, ACTUATING, LINEAR PADZZ WASHER, FLAT PADZZ MS BOLT, MACHINE PADZZ RETAINER, HELICAL COMPRESSION SPRING PADZZ SPRING, STEERING GEAR PADZZ WASHER, FLAT PADZZ E9N RING PADDD HOUSING, ASSEMBLY, MOTOR XADZZ HOUSING, MOTOR (MACH) PADZZ MS PIN, STRAIGHT, HEADLESS XADZZ NAMEPLATE... 1 (SEE FIG 11 FOR NEXT HIGHER ASSEMBLY) 30 XADZZ SCREW, DRIVE... (PROVIDED WITH NAMEPLATE) 31 PADZZ NUT, SELF-LOCKING, HEXAGON... 6 END OF FIGURE /4 blank

140

141 TM P 0033 SUSTAINMENT MAINTENANCE MANIFOLD COMPONENT PARTS (EATON PUMP)

142 TM P 0033 Figure 32. Manifold Component Parts (Eaton Pump)

143 TM P 0033 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0721 COOLERS, PUMPS, MOTORS FIGURE 32 Manifold Component Parts (Eaton Pump). QTY 1 PADZZ DS PLUG, MACHINE THREAD PADZZ E9N PACKING PADZZ E9N SPRING, SPECIAL PADZZ PLUNGER, DETENT PADZZ BODY, PRESSURE CONTROL, TRANSMISSION... 6 PADZZ PIN, STRAIGHT, HEADLESS PADZZ SPRING, HELICAL, COMPRESSION PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ SLEEVE, VALVE PADZZ MANIFOLD, HYDRAULIC SYSTEM ACCESSORIES XADZZ MANIFOLD PADZZ ST7M141C7S. PLUG ASSEMBLY, SEALING PADZZ PLGA A. PLUG, PROTECTIVE, DUST AND MOISTURE SEAL XADZZ BUSHING, SLUG XADZZ DISTRIBUTOR, CHARGE PADZZ E9N PLUG PADZZ PACKING, PREFORMED PADZZ BEARING, ROLLER, CYLINDRICAL PADZZ MS PIN, STRAIGHT, HEADLESS PADZZ O-RING PADZZ PLUG, MACHINE THREAD PADZZ SEAT, HELICAL COMPRESSION SPRING PADZZ SPRING, HELICAL, COMPRESSION PADZZ SETSCREW PADZZ DS VALVE PLATE, HYDRAULIC MOTOR-PUMP PADZZ SCREW, CAP, SOCKET HEAD PADZZ NUT, PLAIN, HEXAGON PADZZ WASHER, FLAT PADZZ PLUG, MACHINE THREAD... 1 END OF FIGURE /4 blank

144

145 TM P 0034 SUSTAINMENT MAINTENANCE PUMP COMPONENT PARTS (EATON PUMP)

146 TM P 0034 Figure 33. Pump Component Parts (Eaton Pump)

147 TM P 0034 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP 0721 COOLERS, PUMPS, MOTORS FIGURE 33 Pump Component Parts (Eaton Pump). QTY 1 PADDD HOUSING ASSEMBLY, PUMP XADZZ HOUSING (MACH) PADZZ STUD, PLAIN PADZZ MS PIN, STRAIGHT, HEADLESS PADZZ DS BEARING, WASHER, THRUST PADZZ DS CAM, CONTROL PADZZ SCREW, CAP, HEXAGON HEAD PADZZ E9N RING PADZZ WASHER, FLAT PADZZ SPRING, STEERING GEAR PADZZ RETAINER, HELICAL COMPRESSION SPRING PADZZ DS CYLINDER, ACTUATING, LINEAR PADZZ BOLT PADZZ CLIP, SPRING TENSION PADZZ PLATE, DAMPER, TRANSMISSION PADZZ DS SPACER, SLEEVE PADZZ PISTON, CLUTCH SHAFT PADZZ DS PLATE, CAM, PUMP PADZZ CAM, CONTROL PADZZ PIN, STRAIGHT, HEADLESS PADZZ BEARING, ROLLER, CYLINDRICAL XADZZ CAM (MACH) PADZZ DS SHAFT, SHOULDERED PADZZ RING, RETAINING PADZZ BEARING, BALL, ANNULAR PADZZ RING, RETAINING, INSTRUMENT PADZZ HEAD, HYDRAULIC MOTOR-PUMP PADZZ WASHER, FLAT PADZZ SCREW, CAP, HEXAGON HEAD... 8 END OF FIGURE /4 blank

148

149 TM P 0035 SUSTAINMENT MAINTENANCE LEFT BRAKE AND OUTPUT CARRIER

150 TM P 0035 Figure 34. Left Brake and Output Carrier

151 TM P 0035 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE BRAKES, (SPECIAL) Left Brake and Output Carrier. QTY 1 PAHZZ BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ SCREW, CAP, SOCKET HEAD PAHZZ WASHER, FLAT PAHZZ RING, RETAINING PAHZZ WASHER, FLAT PAHZZ SPRING, HELICAL, TORSION PAHZZ CAM, CONTROL PAHHH SPIDER, BRAKE PAHZZ PIN, GROOVED, HEADLESS PAHZZ RING, RETAINING XAHZZ SUPPORT, LEFT BRAKE... 1 (USE WITH P/N ) 15 PAHZZ PLUG, VALVE PAHZZ BEARING, ROLLER, NEEDLE PAHZZ PIN, STRAIGHT, HEADLESS PAHZZ PIN, STRAIGHT, HEADLESS PAHZZ SCREW, CAP, HEXAGON HEAD PAHZZ CLIP, SPRING TENSION PAHZZ LINK, BRAKE ADJUSTING PAHZZ LINK, BRAKE ADJUSTING PAHZZ PIN, SPRING PAHZZ CAM, CONTROL PAHZZ PIN, STRAIGHT, HEADLESS PAHZZ CAM, BRAKE APPLY-STATIONARY PAHZZ RETAINER, PACKING PAHZZ SEAL RING, METAL PAHZZ SEAL RING, METAL PAHZZ RING, RETAINING PAHZZ BALL, BEARING PAHZZ CAM, BRAKE, TRANSMISSION PAHZZ GASKET PAHZZ O-RING PAHDD GEAR CLUSTER PADZZ BEARING, SLEEVE XAHZZ GEAR, STEERING RING PAHZZ BEARING, WASHER, THRUST PAHZZ DRUM, BRAKE, CLUTCH PAHDD CARRIER, GEAR ASSEMBLY KDDZZ BEARING, WASHER, THRUST (POLYAMIDE) 42 KDDZZ WASHER, PIN THRUST KDDZZ Q8036. ROLLER, BEARING KDDZZ PINION ASSEMBLY, MATCHED

152 TM P 0035 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) 45 PADZZ FLANGE AND CARRIER KDDZZ SHAFT, STRAIGHT PAHZZ RING, RETAINING PAHZZ ERNB260 RING, RETAINING PAHZZ DISK, CLUTCH PAHZZ PRESSURE PLATE ASSEMBLY PAHZZ DISK, CLUTCH PAHZZ SEAL, BRAKE COOLANT PAHZZ BEARING, WASHER, THRUST PAHZZ GEAR CLUSTER PAHZZ BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ PLATE, BACKING, BRAKE PAHZZ PIN, GROOVED, HEADLESS PAHZZ BS BEARING, ROLLER, CYLINDRICAL PAHZZ SHAFT, SHOULDERED PAHZZ KS BEARING, BALL, ANNULAR PAHZZ GEAR, SPUR... 1 END OF FIGURE QTY

153 TM P 0036 SUSTAINMENT MAINTENANCE RIGHT BRAKE AND OUTPUT CARRIER

154 TM P 0036 Figure 35. Right Brake and Output Carrier

155 TM P 0036 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE BRAKES (SPECIAL) Right Brake and Output Carrier. QTY 1 PAHZZ AA JACT BEARING, BALL, ANNULAR PAHZZ RING, RETAINING PAHZZ SHAFT, SHOULDERED PAHZZ BEARING, ROLLER, CYLINDRICAL PAHZZ GEAR CLUSTER PAHZZ BEARING, WASHER, THRUST PAHZZ PIN, GROOVED, HEADLESS PAHZZ PLATE, BACKING, BRAKE PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ SEAL, BRAKE COOLANT PAHZZ PIN, STRAIGHT, HEADLESS PAHZZ PRESSURE PLATE ASSEMBLY PAHZZ DISK, CLUTCH PAHZZ RING, RETAINING PAHDD CARRIER, GEAR ASSEMBLY KDDZZ SHAFT, STRAIGHT PADZZ FLANGE AND CARRIER KDDZZ BEARING, WASHER, THRUST KDDZZ WASHER, PIN THRUST KDDZZ Q8036. ROLLER, BEARING KDDZZ PINION ASSEMBLY, MATCHED PAHZZ DRUM, BRAKE, CLUTCH PAHZZ BEARING, WASHER, THRUST PAHDD GEAR CLUSTER XAHZZ GEAR, STEERING RING PADZZ BEARING, SLEEVE PAHZZ DISK, CLUTCH PAHZZ MS RING, RETAINING PAHZZ GASKET PAHZZ O-RING PAHZZ CAM, BRAKE, TRANSMISSION PAHZZ CLIP, SPRING TENSION PAHZZ SCREW, CAP, HEXAGON HEAD PAHZZ BALL, BEARING PAHZZ RING, RETAINING PAHZZ SEAL RING, METAL PAHZZ SEAL RING, METAL PAHZZ RETAINER, PACKING PAHZZ CAM, BRAKE APPLY-STATIONARY PAHZZ SUPPORT ASSEMBLY, BRAKE PAHZZ PIN, STRAIGHT, HEADLESS XAHZZ SUPPORT, RIGHT BRAKE PAHZZ BUSHING BLANK PAHZZ BEARING, ROLLER, NEEDLE

156 TM P 0036 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) 47 PAHZZ C PLUG, PIPE PBHZZ COUPLING, TUBE PAHZZ PIN, STRAIGHT, HEADLESS XAHZZ TUBE PAHZZ SEAL, NONMETALLIC ROUND SECTION 1 52 PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ WASHER, FLAT PAHZZ SCREW, CAP, HEXAGON HEAD PAHZZ WASHER, FLAT PAHZZ BOLT, MACHINE PAHZZ BOLT, MACHINE PAHZZ SCREW, CAP, SOCKET HEAD... 2 END OF FIGURE QTY

157 TM P 0037 SUSTAINMENT MAINTENANCE RIGHT BRAKE APPLY VALVE BODY AND BRAKE COOLANT VALVE BODY

158 TM P 0037 Figure 36. Right Brake Apply Valve Body and Brake Coolant Valve Body

159 TM P 0037 ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE BRAKES (SPECIAL) Right Brake Apply Valve Body and Brake Coolant Valve Body. QTY 1 PAHZZ WASHER, FLAT PAHZZ SCREW, CAP, SOCKET HEAD PAHHH VALVE, BRAKE PNEUMATIC PAHZZ SPRING, HELICAL, COMPRESSION XAHZZ BODY, BRAKE APPLY REGULATOR PAHZZ VALVE, REGULATING, FLUID 1 PRESSURE... 7 ADDDD VALVE, REGULATING, FLUID 1 PRESSURE... 8 PADZZ PIN, SPRING PADZZ VALVE, REGULATING, FLUID 1 PRESSURE PADZZ PIN, GROOVED, HEADLESS PADZZ SPRING,HELICAL,COMPRESSION PADZZ SHIM... V 13 PADZZ SLIDE, DIRECTIONAL CONTROL PADZZ WASHER, FLAT PADZZ NUT, SLEEVE PAHZZ PLATE, MENDING... 1 (DISCARD BRAKE BODY ASSEMBLY AND REPLACE WITH NEW IF REMOVED. IF NO SEPARATOR PLATE IS PRESENT, DISCARD BRAKE BODY ASSEMBLY. IF PLATE IS PRESENT, BRAKE BODY MAY BE SENT TO OVERHAUL, IF NECESSARY.) 17 PAHZZ RETAINER, PACKING PAHZZ DISK, VALVE PAHZZ SPRING, HELICAL, COMPRESSION PAHZZ BODY, BRAKE COOLANT... 1 END OF FIGURE /4 blank

160

161 TM P 0038 SUSTAINMENT MAINTENANCE REPAIR KITS Figure 37. Repair Kits ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE REPAIR KITS Repair Kits QTY 1 PADZZ PARTS KIT, DRIVING ASSEMBLY PADZZ PARTS KIT, DRIVING ASSEMBLY PADZZ PARTS KIT, TRANSMISSION... V 4 PADZZ YYX PARTS KIT, HYDRAULIC PADZZ PARTS KIT, HYDRAULIC PADZZ PARTS KIT, DRIVING ASSEMBLY 1 (CENTER CARRIER)... 7 PADZZ UPDATE KIT, MANDATORY 1 REPLACEMENT... END OF FIGURE /2 blank

162

163 TM P 0039 SUSTAINMENT MAINTENANCE BULK ITEMS LIST (1) ITEM NO. (2) SMR CODE (3) NSN (4) CAGEC (5) PART NUMBER (6) DESCRIPTION AND USABLE ON CODE (UOC) GROUP 9501 HARDWARE SUPPLIES AND BULK MATERIAL FIG BULK (7) QTY 1 PAHZZ MIL-D-3464 DESICCANT, ACTIVE BAG; (42 UNITS V MADE FROM 3 EACH 16-UNIT PACKS OF CAGE 19207, P/N )... 2 PAHZZ TT-E-529 PAINT, OLIVE DRAB;... V 3 PAHZZ TT-E-529 PAINT, WHITE, STENCILING;... V 4 XAHZZ DOD-P PRIMER, ACID COMPONENT;... V 5 PAHZZ DOD-P PRIMER, COATING;... V 6 PAHZZ TT-P-664 PRIMER, RED OXIDE;... V 7 XAHZZ DOD-P PRIMER, WASH; (REFERENCE CAGE V 61196, P/N PR-WASH)... 8 PAHZZ MS20995-NC51 WIRE, LOCK;... V END OF FIGURE /2 blank

164

165 TM P 0040 SUSTAINMENT MAINTENANCE SPECIAL TOOLS Figure 38. Special Tools. ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE SPECIAL TOOLS Special Tools. QTY 1 PEHZZ FIXTURE ASSEMBLY, LEAK TEST... (QTY PER SET 1) 2 PEHZZ J PROTECTOR, INNER SEAL, CLUTCH... (QTY PER SET 1) 3 XDHZZ J COMPRESSOR, CLUTCH SPRING... (QTY PER SET 1) 4 PEHZZ J INSTALLER, LOCK RING... (QTY PER SET 1) 5 PEHZZ HOOK, CHAIN, S... (QTY PER SET 2) 6 PEHZZ ADAPTER KIT, CONTAINER... (QTY PER SET 1) END OF FIGURE

166 TM P 0040 Figure 39. Special Tools. ITEM NO. SMR NSN CAGEC PART NO. DESCRIPTION AND USABLE ON CODE (UOC) GROUP FIGURE SPECIAL TOOLS Special Tools. QTY 1 PEHZZ INSERTER AND REMOVER, SEAL... (QTY PER SET 1) 2 PEHZZ J COMPRESSOR, CLUTCH SPRING... (QTY PER SET 1) 3 PEHZZ J LIFTER, PUMP SUPPORT... (QTY PER SET 1) 4 XDHZZ J BAR AND STUD ASSEMBLY... (QTY PER SET 1) 5 XDHZZ 1U3E8 DW1625 DRILL BIT, TWIST, 3/8 SHANK, 3/4 DRILL... (QTY PER SET 1) 6 XDHZZ HOIST, LIFTING, 1-TON CAPACITY... (QTY PER SET 1) (NOT ILLUSTRATED) END OF FIGURE

167 TM P 0041 SUSTAINMENT MAINTENANCE NATIONAL STOCK NUMBER INDEX STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

168 TM P 0041 STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

169 TM P 0041 STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

170 TM P 0041 STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

171 TM P 0041 STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

172 TM P 0041 STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

173 TM P 0041 STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

174 TM P 0041 STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM

175 TM P 0041 STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM /10 blank

176

177 TM P 0042 SUSTAINMENT MAINTENANCE PART NUMBER INDEX PART NUMBER FIG. ITEM AA JACT 35 1 BFBX BS BS BS BS B-1210-OH C DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS ERNB MS MS MS MS MS21044N MS PART NUMBER FIG. ITEM MS MS MS MS MS M83248/ NTA PLEA PLGA A Q Q ST4M ST7M141C7S TRD WW-P-471ACABCC X KS

178 TM P 0042 PART NUMBER FIG. ITEM AX NON-ASBESTOS NON-ASBESTOS PART NUMBER FIG. ITEM

179 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

180 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

181 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

182 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

183 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM L

184 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

185 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

186 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

187 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

188 TM P 0042 PART NUMBER FIG. ITEM PART NUMBER FIG. ITEM

189 RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS For use of this form, see AR 25-30; the proponent agency is OAASA. Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM). DATE Date you filled out this form. TO (Forward to proponent of publication or form) (Include ZIP Code) U.S. Army TACOM Life Cycle Management Command FROM (Activity and location) (Include ZIP Code) Your mailing address ATTN: AMSTA-LCL-MPP/TECH PUBS 6501 E. 11 Mile Road, Warren, MI PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS PUBLICATION/FORM NUMBER DATE TITLE TM Number ITEM PAGE PARA- GRAPH LINE FIGURE NO. TABLE Date of the TM Title of the TM RECOMMENDED CHANGES AND REASON (Exact wording of recommended change must be given) Figure 2, Item 9 should show a lockwasher. Currently shows a flat washer. Cleaning and inspection, Step 6, reference to governor support pin (14) is wrong reference. Reference should be change to (12). SAMPLE TYPED NAME, GRADE OR TITLE Your Name TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION Your Phone Number SIGNATURE Your Signature DA FORM 2028, FEB 74 REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED. APD V4.00

190 TO (Forward direct to addressee listed in publication) U.S. Army TACOM Life Cycle Management Command ATTN: AMSTA-LCL-MPP/TECH PUBS FROM (Activity and location) (Include ZIP Code) Your Address 6501 E. 11 Mile Road, Warren, MI PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS PUBLICATION NUMBER TM Number PAGE NO. COLM NO. LINE NO. NATIONAL STOCK NUMBER DATE Date of the TM REFERENCE NO. FIGURE NO. ITEM NO. TITLE Title of the TM TOTAL NO. OF MAJOR ITEMS SUPPORTED DATE Date you filled out this form RECOMMENDED ACTION SAMPLE PART III REMARKS (Any general remarks, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.) TYPED NAME, GRADE OR TITLE Your Name TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION Your Phone Number SIGNATURE Your Signature APD V4.00

191 RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS For use of this form, see AR 25-30; the proponent agency is OAASA Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM). DATE TO (Forward to proponent of publication or form) (Include ZIP Code) FROM (Activity and location) (Include ZIP Code) U.S. Army TACOM Life Cycle Management Command ATTN: AMSTA-LCL-MPP/TECH PUBS 6501 E. 11 Mile Road, Warren, MI PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS PUBLICATION/FORM NUMBER DATE TITLE TM P ITEM PAGE PARA- GRAPH LINE FIGURE NO. TABLE 13 February 2012 Repair Parts and Special Tools List (RPSTL) for Cross Drive Transmission w/ Container Transmission Model X200-4A. RECOMMENDED CHANGES AND REASON TYPED NAME, GRADE OR TITLE TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION SIGNATURE DA FORM 2028, FEB 74 REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED. APD V4.00

192 TO (Forward direct to addressee listed in publication) U.S. Army TACOM Life Cycle Management Command ATTN: AMSTA-LCL-MPP/TECH PUBS FROM (Activity and location) (Include ZIP Code) 6501 E. 11 Mile Road, Warren, MI PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS PUBLICATION/FORM NUMBER DATE TITLE PAGE NO. TM P COLM NO. LINE NO. NATIONAL STOCK NUMBER REFERENCE NO. 13 February 2012 FIGURE NO. ITEM NO. DATE Repair Parts and Special Tools List (RPSTL) for Cross Drive Transmission w/ Container Transmission Model X200-4A. TOTAL NO. OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION PART III REMARKS (Any general remarks, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.) TYPED NAME, GRADE OR TITLE TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION SIGNATURE APD V4.00

193 RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS For use of this form, see AR 25-30; the proponent agency is OAASA Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM). DATE TO (Forward to proponent of publication or form) (Include ZIP Code) FROM (Activity and location) (Include ZIP Code) U.S. Army TACOM Life Cycle Management Command ATTN: AMSTA-LCL-MPP/TECH PUBS 6501 E. 11 Mile Road, Warren, MI PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS PUBLICATION/FORM NUMBER DATE TITLE TM P ITEM PAGE PARA- GRAPH LINE FIGURE NO. TABLE 13 February 2012 Repair Parts and Special Tools List (RPSTL) for Cross Drive Transmission w/ Container Transmission Model X200-4A. RECOMMENDED CHANGES AND REASON TYPED NAME, GRADE OR TITLE TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION SIGNATURE DA FORM 2028, FEB 74 REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED. APD V4.00

194 TO (Forward direct to addressee listed in publication) U.S. Army TACOM Life Cycle Management Command ATTN: AMSTA-LCL-MPP/TECH PUBS FROM (Activity and location) (Include ZIP Code) 6501 E. 11 Mile Road, Warren, MI PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS PUBLICATION/FORM NUMBER DATE TITLE PAGE NO. TM P COLM NO. LINE NO. NATIONAL STOCK NUMBER REFERENCE NO. 13 February 2012 FIGURE NO. ITEM NO. DATE Repair Parts and Special Tools List (RPSTL) for Cross Drive Transmission w/ Container Transmission Model X200-4A. TOTAL NO. OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION PART III REMARKS (Any general remark, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.) TYPED NAME, GRADE OR TITLE TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION SIGNATURE APD V4.00

195 RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS For use of this form, see AR 25-30; the proponent agency is OAASA Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM). DATE TO (Forward to proponent of publication or form) (Include ZIP Code) FROM (Activity and location) (Include ZIP Code) U.S. Army TACOM Life Cycle Management Command ATTN: AMSTA-LCL-MPP/TECH PUBS 6501 E. 11 Mile Road, Warren, MI PART I ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS PUBLICATION/FORM NUMBER DATE TITLE TM P ITEM PAGE PARA- GRAPH LINE FIGURE NO. TABLE 13 February 2012 Repair Parts and Special Tools List (RPSTL) for Cross Drive Transmission w/ Container Transmission Model X200-4A. RECOMMENDED CHANGES AND REASON TYPED NAME, GRADE OR TITLE TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION SIGNATURE DA FORM 2028, FEB 74 REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED. APD V4.00

196 TO (Forward direct to addressee listed in publication) U.S. Army TACOM Life Cycle Management Command ATTN: AMSTA-LCL-MPP/TECH PUBS FROM (Activity and location) (Include ZIP Code) 6501 E. 11 Mile Road, Warren, MI PART II REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS PUBLICATION/FORM NUMBER DATE TITLE PAGE NO. TM P COLM NO. LINE NO. NATIONAL STOCK NUMBER REFERENCE NO. 13 February 2012 FIGURE NO. ITEM NO. DATE Repair Parts and Special Tools List (RPSTL) for Cross Drive Transmission w/ Container Transmission Model X200-4A. TOTAL NO. OF MAJOR ITEMS SUPPORTED RECOMMENDED ACTION PART III REMARKS (Any general remarks, recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.) TYPED NAME, GRADE OR TITLE TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION SIGNATURE APD V4.00

197 By Order of the Secretary of the Army: Official: RAYMOND T. ODIERNO General, United States Army Chief of Staff JOYCE E. MORROW Administrative Assistant to the Secretary of the Army Distribution: To be distributed in accordance with the initial distribution number (IDN) requirements for TM P.

198

199 4