TECHNICAL MANUAL UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST

Transcription

1 *TM P TECHNICAL MANUAL UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) LUBRICATING AND SERVICING UNIT: POWER OPERATED, TRAILER MOUNTED, 15 CFM COMPRESSOR, RECIPROCATING GASOLINE ENGINE DRIVEN (ELLIOTT MACHINE WORKS, INC. MODEL ENGR3A) NSN Approved for public release; distribution is unlimited. This manual supersedes TM P, dated 15 October HEADQUARTERS, DEPARTMENT OF THE ARMY 12 JUNE 1991

2 CHANGE NO. 1 TM P C1 HEADQUARTERS DEPARTMENT OF THE ARMY WASHINGTON, D. C., 30 JUNE 1993 Unit, Direct Support and General Support Maintenance Repair Parts and Special Tools List (Including Depot Maintenance Repair Parts and Special Tools) LUBRICATING AND SERVICING UNIT: POWER OPERATED, TRAILER MOUNTED, 15 CFM COMPRESSOR, RECIPROCATING GASOLINE ENGINE DRIVEN (ELLIOTT MACHINE WORKS, INC. MODEL ENGR3A) NSN DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited TM P, 12 June 1991, is changed as follows: 1. Remove and insert pages as indicated below. New or changed text material is indicated by a vertical bar in the margin. An illustration change is indicated by a miniature pointing hand. Remove pages Insert pages 36-1 and fig and fig Retain this sheet in front of manual for reference purposes. By Order of the Secretary of the Army: Official: GORDON R. SULLIVAN General, United States Army Chief of Staff MILTON H. HAMILTON Administrative Assistant to the Secretary of the Army DISTRIBUTION: To be distributed in accordance with DA Form E, block no. 1178, requirements for TM P.

3 *TM P TECHNICAL MANUAL NO P HEADQUARTERS, DEPARTMENT OF THE ARMY WASHINGTON, D. C., 12 JUNE 1991 UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS for LUBRICATING AND SERVICING UNIT: POWER OPERATED, TRAILER MOUNTED, 5 CFM COMPRESSOR, RECIPROCATING GASOLINE ENGINE DRIVEN (ELLIOIT MACHINE WORKS, INC. MODEL ENGR3A) NSN &2766 Current as of 28 November 1990 REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this manual, If you find any mistakes or if you know of a way to improve the procedures, please let us know. Mail your letter, DA Form 2028 (Recommended Changes to Publications and Blank Forms) or DA Form located in the back of this manual directly to: Commander, U.S. Army Troop Support Command, ATTN: AMSTR MMTS, 4300 Goodfellow Boulevard, St. Louis, MO , A reply will be furnished directly to you. Approved for public release; distribution is unlimited TABLE OF CONTENTS Page IllUs/ Figure Section I. INTRODUCTION Section Il. Group 01 Group 02 Group 03 Group 04 Group 05 Group 06 Group 07 Repair Parts List Enclosure Frame, Skid, Light Reel, and Tool Box Transfer Pump Hoses, Lines, and Fittings Air Hoses* and Fittings Air Reservoir Lines Engine Oil Lines Chassis Lube Lines Gear Oil Line Alcohol Dispenser Air Valve Reel Assemblies Engine Oil Hose Reel Gear Oil Hose Reel Air Hose Reel Grease Hose Reel This manual supersedes TM P, dated 15 October I

4 TM P Group 08 Group 09 Group 10 Group 11 Group 12 Group 13 Group 14 Group 15 Group 16 Group 17 Group 18 Group 19 Group 20 Group 21 Group 22 Group 23 Group 24 Group 25 Group 26 Group 27 Group 28 Page Control Valves Engine Oil Control Valve Grease Control Valve Gear Oil Control Valve Battery Box Accessories and Fittings Accessories and Fittings Accessories and Fittings Accessories and Fittings Accessories and Fittings Fuel Tank and Lines Control Panel Exhaust Diverters Engine and Components Throttle Control and Generator Engine Mounting and Accessories Engine and Mounting Base Compress or Assembly Air Compressor Assembly Air Compressor Manifolds, Valves, Tubes, and Fittings Air Compressor Intake Muffler Air Compressor Unloader and lntake Valves Ai rcompressor Discharge Valves Air Compressor Crankcase Air Compress or Crankshaft and Pistons Lube Tank Assembly Regulator Assembly Lubricant Pump Assemblies Low Pressure Lubricant Pump, Top Section Low Pressure Lubricant Pump, Middle Section Low Pressure Lubricant Pump, Lower Section High Pressure Lubricant Pump,Top Section High Pressure Lubricant Pump, Middle Section High Pressure Lubricant Pump, Lower Section Electrical System Clearance Lights Blackout Stoplights and Taillights Electrical Junction Box Air and Hydraulic Brake System Air Brake Lines and Fittings Air Coupler Lines Air Brake Components Air Filter Brake Air Chamber Brake Master Cylinder Air Brake Relay Valve WheeIs, Hub, and Drum Illust/ Fgure ii

5 TM P Page lllus/ Figure Group 29 Group 30 Group 31 Group 32 Group 33 Group 34 Suspension System Axle Brake Assembly Wheel Cylinder Landing Gear Trailer Trailer Frame and Accessories Trailer Towing, Tiedown, and Reflectors Section Ill. Special Tools List (nonapplicable) Section IV. Cross Reference Indexes National Stock Number Index Part Number Index Figure and item Number index l l I iii/(iv blank)

6 TM P UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST SECTION I. INTRODUCTION 1. SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other special support equipment required for performance of unit, direct support, and general support maintenance of the Lubricating and Service Unit, Model ENGR-3A. It authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as indicated by the source, maintenance and recoverability (SMR) codes. 2. GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List is divided into the following sections: a. Section Il. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in ascending figure and item number sequence. Bulk materials are listed in item name sequence. Repair parts kits are listed separately in their own functional group within Section il. Repair parts for repairable special tools are also listed in this section. Items listed are shown on the associated illustration(s) /figure(s). b. Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment authorized by this RPSTL (as indicated by Basis of issue (BOI) information in DESCRIPTION AND USABLE ON CODE column) for the performance of maintenance. c. Section IV. Cross-references Indexes. A list, in National Item Identification Number (NIIN) sequence, of ail National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all part numbers appearing in the listings. National stock numbers and part numbers are cross referenced to each illustration figure and item number appearance. The figure and item number index lists figure and item number in alphanumeric sequence and cross references NSN, CAGEC and part number. 3. EXPLANATION OF COLUMNS (SECTIONS II AND III). a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration. b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5 position code containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, as shown in the following breakout: 1

7 TM P * Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks of the Repair function in a use/user environment in order to restore serviceability to a failed item. (1) Source Code. The source code tells you how to get an item needed for maintenance, repair, or overhaul of an end item/equipment. Explanations of source codes follows: Code PA PB PC** PD PE PF PG KD KF KB Explanation Stocked items; use the applicable NSN to request/requisition items with these source codes. They are authorized to the category indicated by the code entered in the 3rd position of the SMR code. **NOTE: Items coded PC are subject to deterioration. Items with these codes are not to be requested/requisitioned individually. They are part of a kit which is authorized to the maintenance category indicated in the 3rd position of the SMR code. The complete kit must be requisitioned and applied. MO (Made at org AVUM Level) MF (Made at DS/AVUM Level) MH (Made at GS Level) ML (Made at Specialized Repair Activity (SRA)) MD (Made at Depot) Items with these codes are not to be requested/requisitioned individually. They must be made from bulk material which is identified by the part number in the DESCRIPTION and USABLE ON CODE (UOC) column and listed in the Bulk Material group of the repair parts list in this RPSTL. If the item is authorized to you by the 3rd position code of the SMR code, but the source code indicates it is made at a higher level, order the item from the higher level of maintenance. AO (Assembled by org/avum Level) AF (Assembled by DS/AVIM Level AH (Assembled by GS Category) AL (Assembled by SRA) AD (Assembled by Depot) Items with these codes are not to be requested/ requisitioned individually. The parts that make up the assembled item must be requisitioned or fabricated and assembled at the level of maintenance indicated by the source code. If the 3rd position code of the SMR code authorizes you to replace the item, but the source code indicates the items are assembled at a higher level, order the item from the higher level of maintenance. XA XB XC XD Do not requisition XA -coded item. Order its next higher assembly. (Also, refer to the NOTE below.) If an XB item is not available from salvage, order it using the CAGEC and part number given. Installation drawing, diagram, instruction sheet, field service drawing, that is identified by Reciprocating Compressor manufacturer s part number. Item is not stocked. Order an the CAGEC and part number XD -coded item through normal supply channels using given if no NSN is available. 2

8 TM P NOTE Cannibalization or controlled exchange, when authorized, may be used as a source of supply for items with the above source codes, except for those source coded XA" or those aircraft support items restricted by requirements of AR (2) Maintenance Code. Maintenance codes tells you the level(s) of maintenance authorized to USE and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows: (a) The maintenance code entered in the third position tells you the lowest maintenance level authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to one of the following levels of maintenance. Code Application/Explanation C Crew or operator maintenance done within organizational or aviation unit maintenance. O Organizational or aviation unit category can remove, replace, and use the item. F Direct support or aviation intermediate level can remove, replace, and use the item H General support level can remove, replace, and use the item. L Specialized repair activity can remove, replace, and use the item, D Depot level can remove, replace, and use the item, (b) The maintenance code entered in the fourth position tells whether or not the item is to be repaired and identifies the lowest maintenance level with the capability to do complete repair (i.e., perform all authorized repair functions.) NOTE: Some limited repair may be done on the item at a lower level of maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes. This position will contain one of the following maintenance codes. Code Application/Explanation O Organizational or (aviation unit) is the lowest level that can do complete repair of the item. F Direct support or aviation intermediate is the lowest level that can do complete repair of the item. H General Support is the lowest level that can do complete repair of the item. L Specialized repair activity is the lowest level that can do complete repair of the item. D Depot is the lowest level that can do complete repair of the item. Z Nonreparable. No repair is authorized. B No repair is authorized, (No parts or special tools are authorized for the maintenance of a B" coded item). However, the item may be reconditioned by adjusting, lubricating, etc., at the user level. (3) Recoverability Code. Recoverability codes are assigned to items to indicate the. disposition action on unserviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows: 3

9 TM P Recoverability Codes Application/Explanation Z Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in 3d position of SMR Code. O Reparable item. When not economically reparable, condemn and dispose of the item at organizational or aviation unit level F Reparable item. When uneconomically reparable, condemn and dispose of the item at the direct support or aviation intermediate level H Reparable item. When uneconomically reparable, condemn and dispose of the item at the general support level. D Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of item not authorized below depot level. L Reparable item. Condemnation and disposal not authorized below specialized repair activity (SRA). A Item requires special handling or condemnation procedures because of specific reasons (e.g., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. c. CAGEC (Column (3)). The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer, (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. NOTE When you use an NSN to requisition an item, the item you receive may have a different part number from the part ordered. e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5). This column includes the following information: (1) The Federal item name and, when required, a minimum description to identify the item. (2) The physical security classification of the item is indicated by the parenthetical entry, e.g., PhySec C1 Confidential, Phy Sec C1 (S) Secret, Phy Sec C1 (T) Top Secret. (3) Items that are included in kits and sets are listed below the name of the kit or set. (4) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line entry. (5) Part numbers for bulk materials are referenced in this column in the line item entry for the item to be manufactured/fabricated. (6) When the item is not used with all serial numbers of the same model, the effective serial numbers are shown on the last line(s) of the description (before UOC). 4

10 TM P (7) The usable on code, when applicable (see paragraph 5, Special Information). (8) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each special tool, special TM DE, and other special support equipment. When density of equipments supported exceeds density spread indicated in the basis of issue, the total authorization is increased proportionately. (9) The statement END OF FIGURE appears just below the last item description in Column 5 for a given figure in both Section II and Section Ill. (1 O) The indenture, shown as dots appearing before the repair part, indicates that the item is a repair part of the next higher assembly. f. QTY (Column (6)). The QTY (quantity per figure column) indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A V appearing in this column in lieu of a quantity indicates that the quantity is variable and may vary from application to application. 4. EXPLANATION OF COLUMNS (SECTION IV). a. NATIONAL STOCK NUMBER (NSN) INDEX. (1) STOCK NUMBER column. This column lists the NSN by National item identification number (NIIN) sequence. The NIIN consists of the last nine digits of the NSN, i.e. NSN NIIN When using this column to locate an item, ignore the first 4 digits of the NSN. However, the complete NSN should be used when ordering items by stock number. (2) FIG. column. This column lists the number of the figure where the item is identified/located. The figures are in numerical order in Section II and Section Ill. (3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG. column, This item is also identified by the NSN listed on the same line. b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric sequence (i e., vertical arrangement of letter and number combination which places the first letter or digit of each group in order A through Z, followed by the numbers O through 9 and each following letter or digit in like order). (1) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. (2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. (3) STOCK NUMBER column. This column Iists the NSN for the associated part number and manufacturer identified in the PART NUMBER and CAGEC columns to the left. 5

11 TM P (4) FIG. column. This column lists the number of the figure where the item is identified/located in Sections II and Ill. (5) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in adjacent figure number column. c. FIGURE AND ITEM NUMBER INDEX. (1) FIG. column. This column lists the number of the figure where the item is identified/located in Section II and Ill. (2) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. (3) STOCK NUMBER column. This column lists the NSN for the item. (4) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. (5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. 5. SPECIAL INFORMATION. a. USABLE ON CODE. The usable on code appears in the lower corner of the Description column heading. Usable on codes are shown as UOC: in the Description Column (justified left) on the last line applicable item description/nomenclature. Uncoded items are applicable to all models. b. ASSOCIATED PUBLICATIONS. The publications listed below pertains to the Lubricating and Service Unit, Model ENGR 3A and its components. Publication Short Title TM Lubricating and Servicing Unit DMWR Lubricating and Servicing Unit TM P Gasoline Engine, model 4A HOW TO LOCATE REPAIR PARTS. a. When National Stock Number or Part Number is NOT Known. (1) First. Using the table of contents, determine the assembly group or subassembly group to which the item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and listings are divided into the same groups. (2) Second. Find the figure covering the assembly group or subassembly group to which the item belongs. 6

12 TM P (3) Third. Identify the item on the figure and note the item number. (4) Fourth. Refer to the Repair Parts List for the figure to find the part number for the item number noted on the figure. (5) Fifth. Refer to the Part Number Index to find the NSN, if assigned. b. When National Stock Number or Part Number is Known. (1) First. Using the Index of National Stock Numbers and Part Numbers, find the pertinent National Stock Number or Part Number. The NSN index is in National Item Identification Number (NIIN) sequence (see c-4a.(1)). The part numbers in the Part Number index are listed in ascending alphanumeric sequence (see paragraph c-4.b). Both indexes cross reference you to the illustration figure and item number of the item you are looking for. (2) Second. After finding the figure and item number, verify that the item is the one you are looking for, then locate the item number in the repair parts list for the figure. 7. ABBREVIATIONS. Abbreviations used in this manual are listed in MlL-STD-12. ABBREVIATIONS BUNA N RBR INTL EXT NPT UNC UNF UNS EXPLANATION BUNA N Rubber Internal External National Pipe Thread Unified Coarse Thread Unified Fine Thread Unified Special Thread 7/(8 blank)

13 TM P Figure 1. Enclosure.

14 TM P FIG. 1 ENCLOSURE 1-1

15 TM P Figure 2. Frame, Skid, Light Reel, and Tool Box.

16 TM P FIG. 2 FRAME, SKID, LIGHT REEL, AND TOOL BOX 2-1

17 TM P Figure 3. Transfer Pump (Sheet 1 of 2).

18 TM P Figure 3. Transfer Pump (Sheet 2 of 2).

19 TM P FIG. 3 TRANSFER PUMP 3 1

20 TM P 3-2

21 TM P Figure 4. Air Hoses and Fittings.

22 TM P FIG. 4 AIR HOSES AND FITTINGS 4-1

23 TM P Figure 5. Air Reservoirs Lines.

24 TM P FIG. 5 AIR RESERVOIR LINES 5-1

25 TM P Figure 6. Engine Oil Lines.

26 FIG. 6 ENGINE OIL LINES 6-1

27 TM P Figure 7. Chassis Lube Lines.

28 FIG. 7 CHASSIS LUBE LINES 7-1

29 TM P Figure 8. Gear Oil Lines.

30 FIG. 8 GEAR OIL LINES 8-1

31 TM P Figure 9. Alcohol Dispenser.

32 FIG. 9 ALCOHOL DISPENSER 9-1

33 TM P Figure 10. Air Valve.

34 FIG. 10 AIR VALVE 10-1

35 TM P Figure 11. Engine Oil Hose Reel.

36 FIG. 11 ENGINE OIL HOSE REEL 11 1

37 TM P Figure 12. Gear Oil Hose Reel.

38 FIG. 12 GEAR OIL HOSE REEL 12-1

39 TM P Figure 13. Air Hose Reel.

40 FIG. 13 AIR HOSE REEL 13-1

41 TM P Figure 14. Grease Hose Reel.

42 FIG. 14 GREASE HOSE REEL 14-1

43 TM P Figure 15. Engine Oil Control Valve.

44 FIG. 15 ENGINE OIL CONTROL VALVE 15-1

45 TM P Figure 16. Grease Control Valve.

46 FIG. 16 GREASE CONTROL VALVE 16-1

47 TM P Figure 17. Gear Oil ControL Valve.

48 FIG. 17 GEAR OIL CONTROL VALVE 17-1

49 TM P Figure 18. Battery Box.

50 FIG. 18 BATTERY BOX 18-1

51 TM P Figure 19. Accessories and Fittings.

52 FIG. 19 ACCESSORIES AND FITTINGS 19-1

53 TM P Figure 20. Accessories and Fittings.

54 FIG. 20 ACCESSORIES AND FITTINGS 20-1

55 TM S P Figure 21. Accessories and Fittings.

56 TM P FIG. 21 ACCESSORIES AND FITTINGS 21-1

57 TM P Figure 22. Lubricating Unit.

58 FIG. 22 LUBRICATING UNIT 22-1

59 TM P Figure 23. Fuel Tank and Lines.

60 FIG. 23 FUEL TANK AND LINES 23-1

61 TM P Figure 24. Control Panel.

62 FIG. 24 CONTROL PANEL 24-1

63 TM P Figure 25. Exhaust Diverters.

64 FIG. 25 EXHAUST DIVERTERS 25-1

65 TM P Figure 26. Throttle Control and Generator.

66 FIG. 26 THROTTLE CONTROL AND GENERATOR 26-1

67 TM P Figure 27. Engine Mounting and Accessories.

68 FIG. 27 ENGINE MOUNTING AND ACCESSORIES 27-1

69 TM P Figure 28. Engine and Mounting Base.

70 FIG. 28 ENGINE AND MOUNTING BASE 28-1

71 TM P Figure 29. Air Compressor Assembly.

72 FIG. 29 AIR COMPRESSOR ASSEMBLY 29-1

73 TM P Figure 30. Air Compressor Manifolds, Valves, Tubes, and Fittings.

74 FIG. 30 AIR COMPRESSOR MANIFOLDS, VALVES, TUBES, AND FITTINGS 30-1

75 TM P Figure 31. Air Compressor Intake Muffler.

76 FIG. 31 AIR COMPRESSOR INTAKE MUFFLER 31-1

77 TM P Figure 32. Air Compressor Unloader and Intake Valves.

78 FIG. AIR COMPRESSOR UNLOADER AND INTAKE VALVES 32-1

79 TM P Figure 33. Air Compressor. Discharge Valves.

80 FIG. 33 AIR COMPRESSOR DISCHARGE VALVES 33 1

81 TM P Figure 34. Air Compressor Crankcase.

82 FIG. 34 AIR COMPRESSOR CRANKCASE 34-1

83 34-2

84 TM P Figure 35. Air Compressor Crankshaft and Pistons.

85 FIG. 35 AIR COMPRESSOR CRANKSHAFT AND POSTONS 35-1

86 TM P Figure 36. Lube Tank Assembly.

87 TM P CO 1 (1) (2) (3) (4) ITEM SMR PART NO CODE CAGEC NUMBER (5) DESCRIPTION AND USABLE ON CODES (UOC) GROUP 16 LUBE TANK ASSEMBLY FIG. 36 LUBE TANK ASSEMBLY (6) QTY 36-1

88 TM P Figure 37. Regulator Assembly. *U.S. GOVERNMENT PRINTING OFFICE: /80280 PIN:

89 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 17 FIG. 37 REGULATOR ASSEMBLY REGULATOR ASSEMBLY 37-1

90 TM P Figure 38. Low Pressure Lubricant Pump, Top Section.

91 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 18 FIG. 38 LUBRICANT PUMP ASSEMBLIES LOW PRESSURE LUBRICANT PUMP, TOP SECTION 38-1

92 TM P Figure 39. Low Pressure Lubricant Pump, Middle Section

93 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 18 FIG. 39 LUBRICANT PUMP ASSEMBLIES LOW PRESSURE LUBRICANT PUMP, MIDDLE SECTION 39-1

94 TM P Figure 40. Low Pressure Lubricant Pump, Lower Section.

95 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 18 FIG. 40 LUBRICANT PUMP ASSEMBLIES LOW PRESSURE LUBRICANT PUMP, LOWER SECTION 40-1

96 TM P Figure 41. High Pressure Lubricant Pump, Top Section.

97 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 18 FIG. 41 LUBRICANT PUMP ASSEMBLIES HIGH PRESSURE LUBRICANT PUMP, TOP SECTION 41-1

98 TM P Figure 42. High Pressure Lubricant Pump, Middle Section.

99 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 18 FIG. 42 LUBRICANT PUMP ASSEMBLIES HIGH PRESSURE LUBRICANT PUMP, MIDDLE SECTION 42-1

100 TM P Figure 43. High Pressure Lubricant Pump, Lower Section.

101 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) PART (5) (6) NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 18 FIG. 43 LUBRICANT PUMP ASSEMBLIES HIGH PRESSURE LUBRICANT PUMP, LOWER SECTION 43 1

102 TM P Figure 44. Electrical System.

103 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 19 FIG. 44 ELECTRICAL SYSTEM ELECTRICAL SYSTEM 44-1

104 TM P Figure 45. Clearance Lights.

105 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 20 FIG. 45 CLEARANCE LIGHTS CLEARANCE LIGHTS 45-1

106 TM P Figure 46. Blackout Stoplights and Taillights.

107 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) (6) QTY GROUP 21 FIG. 46 BLACKOUT STOPLIGHTS AND TAILLIGHTS BLACKOUT STOPLIGHTS AND TAILLIGHTS 46-1

108 TM P Figure 47. Electrical Junction Box.

109 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) PART NUMBER DESCRIPTION AND USABLE ON CODE GROUP 22 FIG. 47 ELECTRICAL JUNCTION ELECTRICAL JUNCTION B 47-1

110 TM P Figure 48. Air Brake Lines and Fittings.

111 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) PART (5) (6) NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 23 FIG. 48 AIR AND HYDRAULIC BRAKE SYSTEM AIR BRAKE LINES AND FITTINGS 48-1

112 TM P Figure 49. Air Coupler Lines.

113 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 23 FIG. 49 AIR AND HYDRAULIC BRAKE SYSTEM AIR COUPLER LINES 49-1

114 TM P Figure 50. Air Brake Components.

115 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 23 FIG. 50 AIR AND HYDRAULIC BRAKE SYSTEM AIR BRAKE COMPONENTS 50 1

116 TM P Figure 51. Air Fitter.

117 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 24 FIG. 51 AIR FILTER AIR FILTER 51-1

118 TM P Figure 52. Brake Air Chamber.

119 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 25 FIG. 52 BRAKE AIR CHAMBER BRAKE AIR CHAMBER 52-1

120 TM P Figure 53. Brake Master Cylinder.

121 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 26 FIG. 53 BRAKE MASTER CYLINDER BRAKE MASTER CYLINDER 53-1

122 TM P Figure 54. Air Brake Relay Valve.

123 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 27 FIG. 54 AIR BRAKE RELAY VALVE AIR BRAKE RELAY VALVE 54-1

124 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY 54-2

125 TM P Figure 55. Wheels, Hub, and Drum.

126 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 28 FIG. 55 WHEEELS, HUB, AND DRUM WHEELS, HUB, AND DRUM 55 1

127 TM P Figure 56. Suspension System.

128 TM P (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 29 FIG. 56 SUSPENSION SYSTEM SUSPENSION SYSTEM 56-1

129 TM P Figure 57. Axle.

130 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 30 AXLE FIG. 57 AXLE 57-1

131 TM P Figure 58. Brake Assembly.

132 (1) (2) (3) ITEM SMR NO CODE CAGEC (4) (5) (6) PART NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 31 FIG. 58 BRAKE ASSEMBLY BRAKE ASSEMBLY 58-1

133 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY 58-2

134 TM P Figure 59. Wheel Cylinder.

135 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 32 FIG. 59 WHEEL CYLINDER WHEEL CYLINDER 59-1

136 TM P Figure 60. Landing Gear.

137 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 33 FIG. 60 LANDING GEAR LANDING GEAR 60-1

138 TM P Figure 61. Trailer Frame and Accessories.

139 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY GROUP 34 FIG. 61 TRAILER TRAILER FRAME AND ACCESSORIES 61 1

140 TM P Figure 62. Trailer Towing, Tiedown, and Reflectors.

141 (1) (2) (3) (4) (5) (6) ITEM SMR PART NO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES(UOC) QTY FIG. 62 TRAILER TOWING, TIEDOWN, 62 1/(62 2 blank)

142 TM P Section Ill. SPECIAL TOOLS LIST (Not Applicable)

143 SECTION IV CROSS-REFERENCE INDEXES I-1

144 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX I-2

145 SECTION IV TM P CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX I-3

146 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX I-4

147 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX I-5

148 SECTION IV CROSS-REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX I-6

149 SECTION IV CROSS-REFERENCE INDEXES I-7

150 SECTION IV I-8

151 SECTION IV CROSS-REFERENCE INDEXES PART NUMBER INDEX I-9

152 SECTION IV I-10

153 SECTION IV I-11

154 SECTION IV I-12

155 SECTION IV I-13

156 SECTION IV I-14

157 SECTION IV I-15

158 SECTION IV I-16

159 SECTION IV I-17

160 SECTION IV CROSS REFERENCE INDEXES PART NUMBER INDEX I-18

161 SECTION IV I-19

162 SECTION IV I-20

163 SECTION IV I-21

164 SECTION IV I-22

165 SECTION IV I-23

166 SECTION IV I-24

167 SECTION IV I-25

168 SECTION IV I-26

169 SECTION IV I-27

170 SECTION IV I-28

171 SECTION IV I-29

172 SECTION IV I-30

173 SECTION IV I-31

174 SECTION IV I-32

175 SECTION IV I-33

176 SECTION IV I-34

177 SECTION IV I-35

178 SECTION IV I-36

179 SECTION IV I-37

180 SECTION IV CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX I-38

181 SECTION IV CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX I-39

182 SECTION IV CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX I-40

183 SECTION IV TM P CROSS REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX I-41

184 SECTION IV CROSS-REFERENCE INDEXES I-42

185 SECTION IV I-43

186 SECTION IV CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX I-44

187 SECTION IV TM P I-45

188 SECTION IV CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX I-46

189 SECTION IV FIG ITEM CROSS-REFERENCE INDEXES FIGURE AND ITEM NUMBER INDEX STOCK NUMBER CAGEC PART NUMBER Z266 MS MS MS MS MS MS MS MS MS MS MS MS MS MS MS GKP5002S D4380 MS X1-4X MS MS MS MS LC6 MS MS MS LC6 LC6 MS MS MS MS MS I-47

190 SECTION IV I-48

191 SECTION IV I-49

192 SECTION IV I-50

193 SECTION IV I-51

194 SECTION IV I-52

195 SECTION IV I-53

196 SECTION IV I-54

197 SECTION IV I-55

198 SECTION IV I-56

199 SECTION IV I-57

200 SECTION IV I-58

201 SECTION IV I-59

202 SECTION IV I-60

203 SECTION IV I-61

204 SECTION IV I-62

205 SECTION IV I-63

206 SECTION IV I-64

207 TM P By Order of the Secretary of the Army: CARL E. VUONO General, United States Amy Chief of Staff Official: PATRICIA P. HICKERSON Brigadier General, United States Army The Adjutant General DISTRIBUTION: To be distributed in accordance with DA Form 12 25E, (qty rqr blk no. 1178) *U.S. GOVERNMENT PRINTING OFFICE OFFICE: /40047

208

209

210

211

212 PIN:

213 This fine document... Was brought to you by me: Liberated Manuals -- free army and government manuals Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap watermarks and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends? I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on. I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines: <A HREF= Military and Government Manuals</A> Sincerely Igor Chudov Chicago Machinery Movers