Features BALL VALVES. Thor Split Body Stainless steel PN ANSI 600 STANDARD FEATURES CERTIFICATIONS ENGINEERING STANDARD
|
|
- Rebecca Little
- 5 years ago
- Views:
Transcription
1 OMAL S.p.a. Via Ponte Nuovo, Rodengo Saiano (BS) ITALY Phone Fax Booked in the Enterprise Register of: Brescia number Share capital completely deposited: ,00 BALL VALVES Thor Split Body Stainless steel featu res featu res & benefits d iag rams d imensions and materials shaft extension d rives Features STANDARD FEATURES Floating ball, full bore. Soft-seat seal: DEVLON. Standard for connecting flanges: ASME B16.5; EN Operating temperature see temperature pressure diagram. Pressure class: /. Intercepted fluid: air, water, gas, petroleum and petrochemical products, aggressive fluids. Antistatic device EN Stem seal: TFM 1 V-ring packing. Additional seal on stem with FKM O-ring. Anti Blow-out stem. Actuator connection as per standard ISO Closing angle >7. SPECIAL FEATURES ON REQUEST For other flange types please contact our sales department. Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department. Mono-directional version with pressure-relief hole in the ball. Stainless steel lever. Stainless steel Stem nuts and springs. For special versions in materials different from the standard (body, ball, stem), please contact our sales department. CERTIFICATIONS In compliance with European Directive 97/23 EC PED. In compliance with ATEX EU Directive (on request). TA-LUFT VDI FIRE SAFE: EN ISO / API 607. API 6D: certificate no 6D-7 only for valves with flange. ENGINEERING STANDARD Be environmentally friendly...please don't print this document unless you really need to. 1 / 20
2 Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN API 6D. Materials and rating in compliance with ASME B16.34 for valves and EN for PN valves. Be environmentally friendly...please don't print this document unless you really need to. 2 / 20
3 Features & benefits 1 Antistatic device (electrical continuity between ball, stem and body) Static electricity is avoided which can cause sparks and fire in an inflammable/explosive environment Contact safety throughout the entire life of the valve 2 Double antifriction washer Less Break Away Torque is granted Less wear comparing with the execution with the single washer 3 "V" seals pack; 3 seals + o-ring It ensures a perfect tightness even after a high number of cycles 4 Spring washer on the shaft seal 5 Stretch Graphite seal Greater precision in the alignment of axes due to a unique positioning in the process machining from raw material to finished valve Easy maintainance directly on site Valves in carbon steel made with certified material - NACE as standard % in- house manufacturing process technology "Fire safe" Certificate ATEX Certificate TA LUFT fugitive emission Certificate API6D Certificate PED Certificate Guarantee of the recovery of the gap due to the wear caused by the rotational movement of the shaft avoiding leakage towards the outside part. Allow to maintain energized the "chevron" seals (V), thus avoiding any leakage to the outside, against huge temperature excursions Tightness towards outside is granted, independently by the thermal excursions to which the valve is subjected Longer lifetime of the valve Less break away torque Reduced maintainance costs Greater corrosion resistance Greater ductility of the material Maximum control and accuracy in all the stages of the manufacturing process Flexibility in supply quickly special executions requested by customers Guarantees the tightness of the valve also in case of fire Installation is possible in a potential explosive environment High level of safety of the tightness towards the outside is granted Can be used in Oil & Gas and Petrochemical applications Max traceability of the manufacturing process and of the Product itself. Full compliance with European Safety Standards for Pressure Equipment Be environmentally friendly...please don't print this document unless you really need to. 3 / 20
4 Diagrams Be environmentally friendly...please don't print this document unless you really need to. 4 / 20
5 Dimensions and materials DIMENSIONS TABLE MISURA SIZE E PN/ A B C ATT. ISO M N F/T G R S H N FORI HOLES I P Kg L H Y PN F04 42 M5 12/ F04 42 M5 12/ Be environmentally friendly...please don't print this document unless you really need to. 5 / 20
6 PN63- PN63- PN63- PN F04 42 M5 12/ F04 42 M5 12/ F05 50 M6 16/ F05 50 M6 16/ F05 50 M6 16/ F05 50 M6 16/ F07 70 M8 22/ F07 70 M8 22/ PN F07 70 M8 22/ PN F07 70 M8 22/ F07 70 M8 22/ PN F M10 30/ PN F M10 30/ F M10 30/ PN F M10 30/ PN F M10 30/ F M10 30/ PN F M16 45/ PN F M16 45/ F M16 45/ Be environmentally friendly...please don't print this document unless you really need to. 6 / 20
7 TABLE OF MATERIALS PN16-40 FROM BAR N Description F304stainless steel F316stainless steel F51 Duplex stainless steel 1 Corpo ASTM A182 F304 / A479TP Terminale ( / X5CrNi18-10) ASTM A 182 F316 / A479TP.316 ( / X5CrNiMo ) ASTM A182 F51 (UNS 31803) 3 Sfera ASTM A351 CF8 (1.4308/Gx5CrNi19-10) ASTM A351 CF8M (1.4408/Gx5CrNiMo ) ASTM A182 F51 (UNS 31803)/A995 CD3MN (UNS J92205) 4 Stelo A564 TP.630 (17-4PH) A564 TP.630 (17-4PH) ASTM A 182 F51 (UNS 31803) 5 Seggio DEVLON DEVLON DEVLON 6 Guarnizione corpo terminale GRAFOIL GRAFOIL GRAFOIL 7 Tenuta inferiore stelo TFM1 (.) TFM1 (.) TFM1 (.) 8 Guarnizioni tipo TFM1 (.) TFM1 (.) TFM1 (.) 9 O-ring stelo FKM (.) FKM (.) FKM (.) 10 Anello premi guarnizione 304 S.S. 304 S.S. 304 S.S. 11 Piastra blocca dado 304 S.S. 304 S.S. 304 S.S. 12 Dado stelo UNI S Zincato (xx) UNI S Zincato (xx) A2-70 UNI 3740 (304 S.S.) 13 Molle a tazza 50CrV4 Zincato (xx) 50CrV4 Zincato (xx) 301 S.S. 14 Dispositivo antistatico 316 S.S. 316 S.S. 316 S.S. 15 Tiranti ASTM A193-B8 ASTM A193-B8 ASTM A193-B8 16 Dadi ASTM A194-Gr.8 ASTM A194-Gr.8 ASTM A194-Gr.8 17 Controdado UNI S Zincato UNI S Zincato UNI S Zincato 18 Vite di fermo A2-70 UNI 3740 (304 S.S.) A2-70 UNI 3740 (304 S.S.) A2-70 UNI 3740 (304 S.S.) 19 Fermo di posizione Acciaio al carbonio zincato (x) Acciaio al carbonio zincato (x) 304 s.s. 20 Leva Fe37 zincato (x) Fe37 zincato (x) 304 s.s. Available on request: (*): A351 CF8M (**): Per <32 solo in CF8M (x): 304 s.s. (xx): 301 s.s. for <32 available only in DEVLON (.): Other materials available on request Be environmentally friendly...please don't print this document unless you really need to. 7 / 20
8 Shaft extension WELDED SPINDLE EXTENSION WITH LEVER MATERIALS TABLE PART. N DESCRIPTION MATERIALS 1 Extension AISI304 S.S. 2 Pin AISI 430 F 3 Bush DELRIN 4 O-RING NBR 5 Lever Fe 37 galvanized (*) 6 Nut galvanized carbon steel (*) Be environmentally friendly...please don't print this document unless you really need to. 8 / 20
9 7 Holder Lever galvanized carbon steel (*) 8 Holder screw A Lever nut A2 (**) (*): On request available in Aisi 304 s.s. (**): No available on valves with Iso connection F04 DIMENSIONS TABLE ISO A B C M N F/T Y F ,5 36 5,5 10/6 140 F ,5 42 M5 12/8 150 F ,5 50 6,5 16/ F / F / NOTE: Code of the spindle extension depending from drive s type and valve s connection; to be requested at the order SPINDLE EXTENSION FOR ACTUATORS Be environmentally friendly...please don't print this document unless you really need to. 9 / 20
10 NOTE: Dimensions depending from valve s connection NOTE: Dimensions depending from actuator s size MATERIALS TABLE PART. N DESCRIPTION MATERIALS 1 Prolunga Extension 304 S.S. 2 Perno Pin AISI 430 F 3 Bussola Bush DELRIN 4 O-RING O-RING NBR NOTE: Code of the spindle extension depending from drive s type and valve s connection; to be requested at the order Be environmentally friendly...please don't print this document unless you really need to. 10 / 20
11 Drives - bare shaft and lever STAINLESS STEEL BARE SHAFT (V ) AND LEVER (L ) OPERATED VALVE CODE size PN/ F304 Stainless steel F316 Stainless steel F51 Duplex Stainless steel 15 V/LT104N03AAA0ADMRV000 V/LT104N03ABA0ADMRV000 V/LT104N03AID0CDMRV V/LT104404AAA0ADMRV000 V/LT104404ABA0ADMRV000 V/LT104404AID0CDMRV V/LT105N03AAA0ADMRV000 V/LT105N03ABA0ADMRV000 V/LT105N03AID0CDMRV V/LT105404AAA0ADMRV000 V/LT105404ABA0ADMRV000 V/LT105404AID0CDMRV V/LT106N03AAA0AEMRV000 V/LT106N03ABA0AEMRV000 V/LT106N03AID0CEMRV V/LT106404AAA0AEMRV000 V/LT106404ABA0AEMRV000 V/LT106404AID0CEMRV V/LT107N03AAA0AEMRV000 V/LT107N03ABA0AEMRV000 V/LT107N03AID0CEMRV V/LT107404AAA0AEMRV000 V/LT107404ABA0AEMRV000 V/LT107404AID0CEMRV V/LT108N03AAB0AEMNV000 V/LT108N03ABA0AEMNV000 V/LT108N03AID0CEMNV V/LT108404AAB0AEMNV000 V/LT108404ABA0AEMNV000 V/LT108404AID0CEMNV PN63 V/LT109K03AAB0AEMNV000 V/LT109K03ABA0AEMNV000 V/LT109K03AID0CEMNV PN V/LT109L03AAB0AEMNV000 V/LT109L03ABA0AEMNV000 V/LT109L03AID0CEMNV V/LT109404AAB0AEMNV000 V/LT109404ABA0AEMNV000 V/LT109404AID0CEMNV PN63 V/LT110K03AAB0AEMNV000 V/LT110K03ABA0AEMNV000 V/LT110K03AID0CEMNV PN V/LT110L03AAB0AEMNV000 V/LT110L03ABA0AEMNV000 V/LT110L03AID0CEMNV V/LT110404AAB0AEMNV000 V/LT110404ABA0AEMNV000 V/LT110404AID0CEMNV PN63 V/LT111K03AAB0AEMNV000 V/LT111K03ABA0AEMNV000 V/LT111K03AID0CEMNV PN V/LT111L03AAB0AEMNV000 V/LT111L03ABA0AEMNV000 V/LT111L03AID0CEMNV V/LT111404AAB0AEMNV000 V/LT111404ABA0AEMNV000 V/LT111404AID0CEMNV000 PN63 V/LT112K03AAB0AEMNV000 V/LT112K03ABA0AEMNV000 V/LT112K03AID0CEMNV000 PN V/LT112L03AAB0AEMNV000 V/LT112L03ABA0AEMNV000 V/LT112L03AID0CEMNV000 V/LT112404AAB0AEMNV000 V/LT112404ABA0AEMNV000 V/LT112404AID0CEMNV000 Be environmentally friendly...please don't print this document unless you really need to. 11 / 20
12 Drives - double acting pneumatic actuator Item codes in F304 AND F316 STAINLESS Steel F304 STAINLESS STEEL F316 STAINLESS STEEL Actuator Connecting kit Size PN N H Kg DT104N03AAA0ADMRV000AACA0 DT104N03ABA0ADMRV000AACA0 DA030401S KCF DT105N03AAA0ADMRV000AADA0 DT105N03ABA0ADMRV000AADA0 DA045401S KCF DT106N03AAA0AEMRV000AAEA0 DT106N03ABA0AEMRV000AAEA0 DA060402S KCF DT107N03AAA0AEMRV000AAFA0 DT107N03ABA0AEMRV000AAFA0 DA090401S KCF DT108N03AAB0AEMNV000AAHA0 DT108N03ABA0AEMNV000AAHA0 DA120401S KCF ,4 7, ,4 9, ,4 12, ,5 15, ,4 22,4 DT109K03AAB0AEMNV000AAIA0 DT109K03ABA0AEMNV000AAIA0 DA180401S KCF PN ,0 DT109L03AAB0AEMNV000AAIA0 DT109L03ABA0AEMNV000AAIA0 DA180401S KCF PN ,1 DT110K03AAB0AEMNV000AAJA0 DT110K03ABA0AEMNV000AAJA0 DA240401S KCF PN ,4 49,3 DT110L03AAB0AEMNV000AAJA0 DT110L03ABA0AEMNV000AAJA0 DA240401S KCF PN ,4 52,3 DT111K03AAB0AEMNV000AAKA0 DT111K03ABA0AEMNV000AAKA0 DA360401S KCF PN ,5 59,1 DT111L03AAB0AEMNV000AAKA0 DT111L03ABA0AEMNV000AAKA0 DA360401S KCF PN ,5 62,5 DT112K03AAB0AEMNV000AAMA0 DT112K03ABA0AEMNV000AAMA0 DA720401S KCF DT112L03AAB0AEMNV000AAMA0 DT112L03ABA0AEMNV000AAMA0 DA720401S KCF PN , PN 329, Item codes in F51 STAINLESS Steel F51 DUPLEX STAINLESS STEEL Actuator Connecting kit Size PN N H Kg Be environmentally friendly...please don't print this document unless you really need to. 12 / 20
13 DT104N03AID0CDMRV000AACA0 DA030401S KCF ,4 7,3 DT105N03AID0CDMRV000AADA0 DA045401S KCF ,4 9,2 DT106N03AID0CEMRV000AAEA0 DA060402S KCF ,4 12,6 DT107N03AID0CEMRV000AAFA0 DA090401S KCF ,5 15,5 DT108N03AID0CEMNV000AAHA0 DA120401S KCF ,4 22,4 DT109K03AID0CEMNV000AAIA0 DA180401S KCF PN ,0 DT109L03AID0CEMNV000AAIA0 DA180401S KCF PN ,1 DT110K03AID0CEMNV000AAJA0 DA240401S KCF PN ,4 49,3 DT110L03AID0CEMNV000AAJA0 DA240401S KCF PN ,4 52,3 DT111K03AID0CEMNV000AAKA0 DA360401S KCF PN ,5 59,1 DT111L03AID0CEMNV000AAKA0 DA360401S KCF PN ,5 62,5 DT112K03AID0CEMNV000AAMA0 DA720401S KCF PN , DT112L03AID0CEMNV000AAMA0 DA720401S KCF PN 329, Item codes in F304 AND F316 STAINLESS Steel F304 STAINLESS STEEL F316 STAINLESS STEEL Actuator Connecting kit Size N H Kg DT104404AAA0ADMRV000AACA0 DT104404ABA0ADMRV000AACA0 DA030401S KCF DT105404AAA0ADMRV000AADA0 DT105404ABA0ADMRV000AADA0 DA045401S KCF DT106404AAA0AEMRV000AAEA0 DT106404ABA0AEMRV000AAEA0 DA060402S KCF DT107404AAA0AEMRV000AAFA0 DT107404ABA0AEMRV000AAFA0 DA090401S KCF DT108404AAB0AEMNV000AAHA0 DT108404ABA0AEMNV000AAHA0 DA120401S KCF DT109404AAB0AEMNV000AAIA0 DT109404ABA0AEMNV000AAIA0 DA180401S KCF DT110404AAB0AEMNV000AAJA0 DT110404ABA0AEMNV000AAJA0 DA240401S KCF DT111404AAB0AEMNV000AAKA0 DT111404ABA0AEMNV000AAKA0 DA360401S KCF ,4 6, ,7 7, ,4 10, ,5 14, ,4 21, , ,4 49, ,5 61,2 DT112404AAB0AEMNV000AAMA0 DT112404ABA0AEMNV000AAMA0 DA720401S KCF , Item codes in F51 STAINLESS Steel F51 DUPLEX STAINLESS STEEL Actuator Connecting kit Size N H Kg DT104404AID0CDMRV000AACA0 DA030401S KCF ,4 6,5 DT105404AID0CDMRV000AADA0 DA045401S KCF ,7 7,8 DT106404AID0CEMRV000AAEA0 DA060402S KCF ,4 10,9 DT107404AID0CEMRV000AAFA0 DA090401S KCF ,5 14,7 DT108404AID0CEMNV000AAHA0 DA120401S KCF ,4 21,8 Be environmentally friendly...please don't print this document unless you really need to. 13 / 20
14 DT109404AID0CEMNV000AAIA0 DA180401S KCF ,7 DT110404AID0CEMNV000AAJA0 DA240401S KCF ,4 49,6 DT111404AID0CEMNV000AAKA0 DA360401S KCF ,5 61,2 DT112404AID0CEMNV000AAMA0 DA720401S KCF , Be environmentally friendly...please don't print this document unless you really need to. 14 / 20
15 Drives - spring return pneumatic actuator Item codes in F304 AND F316 STAINLESS Steel F304 STAINLESS STEEL F316 STAINLESS STEEL Actuator Connecting kit Size PN N H Kg ST104N03AAA0ADMRV000AAEA0 ST104N03ABA0ADMRV000AAEA0 SR030402S KCF ST105N03AAA0ADMRV000AAFA0 ST105N03ABA0ADMRV000AAFA0 SR045401S KCF ST106N03AAA0AEMRV000AAHA0 ST106N03ABA0AEMRV000AAHA0 SR060401S KCF ST107N03AAA0AEMRV000AAIA0 ST107N03ABA0AEMRV000AAIA0 SR090401S KCF ST108N03AAB0AEMNV000AAJA0 ST108N03ABA0AEMNV000AAJA0 SR120401S KCF ,4 8, ,5 10, ,4 14, , ,4 26 ST109K03AAB0AEMNV000AAKA0 ST109K03ABA0AEMNV000AAKA0 SR180401S KCF PN ,8 ST109L03AAB0AEMNV000AAKA0 ST109L03ABA0AEMNV000AAKA0 SR180401S KCF PN ST110K03AAB0AEMNV000AALA0 ST110K03ABA0AEMNV000AALA0 SR240401S KCF PN ST110L03AAB0AEMNV000AALA0 ST110L03ABA0AEMNV000AALA0 SR240401S KCF PN ST111K03AAB0AEMNV000AAMA0 ST111K03ABA0AEMNV000AAMA0 SR360401S KCF PN ,5 67,8 ST111L03AAB0AEMNV000AAMA0 ST111L03ABA0AEMNV000AAMA0 SR360401S KCF PN ,5 71,2 ST112K03AAB0AEMNV000AAQA0 ST112K03ABA0AEMNV000AAQA0 SRN S KCF ST112L03AAB0AEMNV000AAQA0 ST112L03ABA0AEMNV000AAQA0 SRN S KCF PN PN Item codes in F51 STAINLESS Steel F51 DUPLEX STAINLESS STEEL Actuator Connecting kit Size PN N H Kg ST104N03AID0CDMRV000AAEA0 SR030402S KCF ,4 8,3 ST105N03AID0CDMRV000AAFA0 SR045401S KCF ,5 10,3 Be environmentally friendly...please don't print this document unless you really need to. 15 / 20
16 ST106N03AID0CEMRV000AAHA0 SR060401S KCF ,4 14,5 ST107N03AID0CEMRV000AAIA0 SR090401S KCF ,2 ST108N03AID0CEMNV000AAJA0 SR120401S KCF ,4 26 ST109K03AID0CEMNV000AAKA0 SR180401S KCF PN ,8 ST109L03AID0CEMNV000AAKA0 SR180401S KCF PN ST110K03AID0CEMNV000AALA0 SR240401S KCF PN ST110L03AID0CEMNV000AALA0 SR240401S KCF PN ST111K03AID0CEMNV000AAMA0 SR360401S KCF PN ,5 67,8 ST111L03AID0CEMNV000AAMA0 SR360401S KCF PN ,5 71,2 ST112K03AID0CEMNV000AAQA0 SRN S KCF PN ST112L03AID0CEMNV000AAQA0 SRN S KCF PN Item codes in F304 AND F316 STAINLESS Steel F304 STAINLESS STEEL F316 STAINLESS STEEL Actuator Connecting kit Size N H Kg ST104404AAA0ADMRV000AAEA0 ST104404ABA0ADMRV000AAEA0 SR030402S KCF ST105404AAA0ADMRV000AAFA0 ST105404ABA0ADMRV000AAFA0 SR045401S KCF ST106404AAA0AEMRV000AAHA0 ST106404ABA0AEMRV000AAHA0 SR060401S KCF ST107404AAA0AEMRV000AAIA0 ST107404ABA0AEMRV000AAIA0 SR090401S KCF ST108404AAB0AEMNV000AAJA0 ST108404ABA0AEMNV000AAJA0 SR120401S KCF ST109404AAB0AEMNV000AAKA0 ST109404ABA0AEMNV000AAKA0 SR180401S KCF ST110404AAB0AEMNV000AALA0 ST110404ABA0AEMNV000AALA0 SR240401S KCF ST111404AAB0AEMNV000AAMA0 ST111404ABA0AEMNV000AAMA0 SR360401S KCF ,4 7, ,5 8, ,4 12, , ,4 24, , , ,5 70 ST112404AAB0AEMNV000AAQA0 ST112404ABA0AEMNV000AAQA0 SRN S KCF Item codes in F51 STAINLESS Steel F51 DUPLEX STAINLESS STEEL Actuator Connecting kit Size N H Kg ST104404AID0CDMRV000AAEA0 SR030402S KCF ,4 7,5 ST105404AID0CDMRV000AAFA0 SR045401S KCF ,5 8,9 ST106404AID0CEMRV000AAHA0 SR060401S KCF ,4 12,8 ST107404AID0CEMRV000AAIA0 SR090401S KCF ,6 ST108404AID0CEMNV000AAJA0 SR120401S KCF ,4 24,5 ST109404AID0CEMNV000AAKA0 SR180401S KCF ,6 ST110404AID0CEMNV000AALA0 SR240401S KCF ,3 Be environmentally friendly...please don't print this document unless you really need to. 16 / 20
17 ST111404AID0CEMNV000AAMA0 SR360401S KCF ,5 70 ST112404AID0CEMNV000AAQA0 SRN S KCF Be environmentally friendly...please don't print this document unless you really need to. 17 / 20
18 Drives - electrical actuators Item codes in F304 AND F316 STAINLESS Steel F304 STAINLESS STEEL F316 STAINLESS STEEL Actuator Connecting kit Size PN N H Kg ET104N03AAA0ADMRV000AMEG0 ET104N03ABA0ADMRV000AMEG0 EA0035A5C000 KCF ,9 ET105N03AAA0ADMRV000AMEG0 ET105N03ABA0ADMRV000AMEG0 EA0035A5C000 KCF ,5 ET106N03AAA0AEMRV000AMGG0 ET106N03ABA0AEMRV000AMGG0 EA0070A5C000 KCF ,8 ET107N03AAA0AEMRV000AMGG0 ET107N03ABA0AEMRV000AMGG0 EA0070A5C000 KCF ,5 ET108N03AAB0AEMNV000AMIG0 ET108N03ABA0AEMNV000AMIG0 EA0130A5C000 KCF ,6 ET109K03AAB0AEMNV000AMIG0 ET109K03ABA0AEMNV000AMIG0 EA0130A5C000 KCF PN ,3 ET109L03AAB0AEMNV000AMIG0 ET109L03ABA0AEMNV000AMIG0 EA0130A5C000 KCF PN ,5 ET110K03AAB0AEMNV000AMKG0 ET110K03ABA0AEMNV000AMKG0 EA0240A5C000 KCF PN ,5 ET110L03AAB0AEMNV000AMKG0 ET110L03ABA0AEMNV000AMKG0 EA0240A5C000 KCF PN ,5 ET111K03AAB0AEMNV000AMNA0 ET111K03ABA0AEMNV000AMNA0 AE140 KCE PN ,5 366,5 60,9 ET111L03AAB0AEMNV000AMNA0 ET111L03ABA0AEMNV000AMNA0 AE140 KCE PN 256,5 366,5 64,3 ET112K03AAB0AEMNV000AMTA0 ET112K03ABA0AEMNV000AMTA0 AE160 KCE PN ET112L03AAB0AEMNV000AMTA0 ET112L03ABA0AEMNV000AMTA0 AE160 KCE PN Be environmentally friendly...please don't print this document unless you really need to. 18 / 20
19 Item codes in F51 STAINLESS Steel F51 DUPLEX STAINLESS STEEL Actuator Connecting kit Size PN N H Kg ET104N03AID0CDMRV000AMEG0 EA0035A5C000 KCF ,9 ET105N03AID0CDMRV000AMEG0 EA0035A5C000 KCF ,5 ET106N03AID0CEMRV000AMGG0 EA0070A5C000 KCF ,8 ET107N03AID0CEMRV000AMGG0 EA0070A5C000 KCF ,5 ET108N03AID0CEMNV000AMIG0 EA0130A5C000 KCF ,6 ET109K03AID0CEMNV000AMIG0 EA0130A5C000 KCF PN ,3 ET109L03AID0CEMNV000AMIG0 EA0130A5C000 KCF PN ,5 ET110K03AID0CEMNV000AMKG0 EA0240A5C000 KCF PN ,5 ET110L03AID0CEMNV000AMKG0 EA0240A5C000 KCF PN ,5 ET111K03AID0CEMNV000AMNA0 AE140 KCE PN ,5 366,5 60,9 ET111L03AID0CEMNV000AMNA0 AE140 KCE PN 256,5 366,5 64,3 ET112K03AID0CEMNV000AMTA0 AE160 KCE PN ET112L03AID0CEMNV000AMTA0 AE160 KCE PN Item codes in F304 AND F316 STAINLESS Steel F304 STAINLESS STEEL F316 STAINLESS STEEL Actuator Connecting kit Size N H Kg ET104404AAA0ADMRV000AMEG0 ET104404ABA0ADMRV000AMEG0 EA0035A5C000 KCF ,1 ET105404AAA0ADMRV000AMEG0 ET105404ABA0ADMRV000AMEG0 EA0035A5C000 KCF ,1 ET106404AAA0AEMRV000AMGG0 ET106404ABA0AEMRV000AMGG0 EA0070A5C000 KCF ,1 ET107404AAA0AEMRV000AMGG0 ET107404ABA0AEMRV000AMGG0 EA0070A5C000 KCF ,9 ET108404AAB0AEMNV000AMIG0 ET108404ABA0AEMNV000AMIG0 EA0130A5C000 KCF ,1 ET109404AAB0AEMNV000AMIG0 ET109404ABA0AEMNV000AMIG0 EA0130A5C000 KCF ,1 ET110404AAB0AEMNV000AMKG0 ET110404ABA0AEMNV000AMKG0 EA0240A5C000 KCF ,8 ET111404AAB0AEMNV000AMNA0 ET111404ABA0AEMNV000AMNA0 AE140 KCE ,5 366,5 63 ET112404AAB0AEMNV000AMTA0 ET112404ABA0AEMNV000AMTA0 AE160 KCE Item codes in F51 STAINLESS Stee F51 DUPLEX STAINLESS STEEL Actuator Connecting kit Size N H Kg Be environmentally friendly...please don't print this document unless you really need to. 19 / 20
20 ET104404AID0CDMRV000AMEG0 EA0035A5C000 KCF ,1 ET105404AID0CDMRV000AMEG0 EA0035A5C000 KCF ,1 ET106404AID0CEMRV000AMGG0 EA0070A5C000 KCF ,1 ET107404AID0CEMRV000AMGG0 EA0070A5C000 KCF ,9 ET108404AID0CEMNV000AMIG0 EA0130A5C000 KCF ,1 ET109404AID0CEMNV000AMIG0 EA0130A5C000 KCF ,1 ET110404AID0CEMNV000AMKG0 EA0240A5C000 KCF ,8 ET111404AID0CEMNV000AMNA0 AE140 KCE ,5 366,5 63 ET112404AID0CEMNV000AMTA0 AE160 KCE Be environmentally friendly...please don't print this document unless you really need to. 20 / 20
Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationFeatures BALL VALVES. Brass ball valve ITEM 160,161-3-way threaded-ends GENERAL FEATURES ON REQUEST
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationFeatures BALL VALVES. Brass ball valve ITEM way full-bore threaded-ends GENERAL FEATURES ON REQUEST APPROVALS
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationFeatures PNEUMAT IC VALVES. Pneumatic valves Vip - Pneumatic coaxial valve GENERAL FEATURES CONTROL MEDIA OPERATING MEDIA
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationFeatures PNEUMATIC ACTUATORS. Stainless steel pneumatic actuators Spring return SR from bar. Technical features. Working condition
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationTwo-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationBALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationMaterials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationFSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationFeatures PNEUMAT IC VALVES. Angle seat valves Special ends GENERAL FEATURES OPERATING MEDIA CONTROL MEDIA
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationRAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationMaterials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to 100 mm Flanges R.F. PN40-20 C + 220 C Max Pressure : 40 Bars Specifications : ISO 5211 mounting pad PTFE filled with stainless
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationBall Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationRT7 BALL VALVES "4 WAY" WITH X BALL ROBINETS A BOULE "4 VOIES" AVEC BOULE A X KUGELHÄHNE "4 WEGE" MIT X KUGEL TYPE PN
ISO 9001:2008 by L.R. WWW.ADLERSPA.COM BALL VALVES "4 WAY" WITH X BALL KUGELHÄHNE "4 WEGE" MIT X KUGEL ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationStandard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
More information516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
More informationMaterials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
More informationFo ge Steel Floating Ball Valves
Fo ge Steel Floating Ball Valves 26 Design and Inspection Standard: Pressure-Temperature Ratings Shell Wall Thickness Face-to-face Dimensions End connection Dimensions Pressure Test Fire Safe Test Marking
More informationRef FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
More informationMaterials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 250 mm Between flanges PN16/40-28 C + 200 C Max Pressure : 40 Bars up to DN80, 16 bars over Specifications : With ISO 5211 mounting pad Contents
More information2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationFLANGED 150 & 300 FULL PORT BALL VALVES
FLANGED 150 & 300 FULL PORT BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED STEEL BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 25A 25J 402 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Class 150 (PN20) R.F. Flanges -50 C in SS and -29 C in carbon steel + 230 C Max Pressure : 20 Bars
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationØ 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R Ø T. n x ØS BALL VALVES ØP ØR ØT
J H Ø T Ø R Ø 5 L2 DN-3 (12 ) to DN-4 (16 Class-1 & 3 DN-1 (6 ) to DN-3 ØI X B Y L Ø P M n x Øs B N h C 4x9=36 J Ø 5 Ø P I n x ØS ØP ØR ØT 1 J B C R3 BALL VALVES L M Ø T Ø R n x Øs I Ø5 5 R1 ØP Ø P L ISO
More informationCentered Rubber Seated Valves DS Series
Centered Rubber Seated Valves DS Series The Power to Perform. Orton is part of Truflo International plc, a leading supplier of specialist flow control products, with a presence on each continent. Orton
More informationTwo-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationValvola a sfera sanitaria manuale. Manual sanitary ball valve
Valvola a sfera sanitaria manuale Manual sanitary ball valve Valvola a sfera sanitaria manuale Manual sanitary ball valve elemento element qtà quantity Elenco parti / Parts list descrzione description
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationVALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE
PN 10-40 VALVOLE A SFERA UNI EN 558-1 SPLIT BODY PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationETV is a manufacturer. for Oil and Gas, Chemical, Process Plant, Onshore / offshore industries.
ETV is a manufacturer of ball valves for Oil and Gas, Chemical, Petrochemicals, Process Plant, Onshore / offshore industries. Our range of production is from ½ to 36 class 150 to 2500 floating or Trunnion
More informationK-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
More informationCLASS 150 & 300 REDUCED BORE BALL VALVES
CLASS 150 & 300 REDUCED BORE BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 503 507 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL A:
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
More informationGWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002
GWC Italia Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
More informationCRYOGENIC. Italian Manufactured, Italian Quality
Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction
More informationVALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
More informationVALVOLE A SFERA 4 VIE CON SFERA A X
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 4
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc. www.isvalve.com
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationBUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
More informationMultiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals
Multiway Ball Valve with Vertical In-/Outlet Metal Seated Type 24-M Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe
More informationThree-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
More informationHigh pressure valves. Inspired By Challenge
Inspired By Challenge Floating Valves High pressure General Series 7 Series 8 Series Introduction Ordering code system The Habonim high pressure valve series is based on a floating ball valve technology,
More informationRef FIRE SAFE BALL VALVE ISO PN16/40 FLANGED. Model/Ref:
Ref. 753-753 Model/Ref: 752-753 www.lauridsenindustri.com Ref. 752-753 Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ISO PN16/40 Flanges -50 C in SS and -20 C in carbon steel + 250
More informationRAM Company USA Products Line
RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON
More informationVALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationFor ball valves
Soft seal Ball valve Float ball valve Flange PN16-40 DN15-200 For 1.4408 ball valves Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries Temperature
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationWKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
More informationInspired By Challenge. Three piece ball valves
Inspired By Challenge Three piece ball valves Floating Valves General Fire safe Graphite-free fire-safe Ordering code system Introduction Habonim -piece ball valves 7 series Habonim line of -piece ball
More informationBall Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationIntroduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range...
CATALOGUE CONTENTS Introduction... 3 Certifications...4-5 References Standards... 6 Ball Valves... 7 Trunnion Mounted Ball Vaves... 8 Product Range... 9 Available Design Options... 10 Quality & Testing...
More informationGWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
More informationVALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
More informationThree Piece Forged Trunnion Mounted Ball Valve
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 300 mm PN16/40 R.F. Flanges -50 C in SS and -20 C in carbon steel + 230 C Max Pressure : 40 Bars up to DN50, 16 Bars over
More informationPBV. Threaded and Socketweld Ball Valves P.B.V.
PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar
More informationGhibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy. Butterfly valves
HD series valve HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes 7 Pneumatic actuators
More informationVALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B NPT
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
More informationB V 4 S M A R T. Split body ball valve. Smart Design. Maximum certified Automation ready R T. Reduced weight traceability
B V 4 S M A R T Split body ball valve S Smart Design M Maximum certified Automation ready A R T Reduced weight traceability Table of contents Smart Design BV4 Smart - DIN F4 - AINSI 150 LBS Pag 3-4 - 5
More informationThe Company LCM ITALIA, which is part of CHERO group, was established
Contents oreword Applicds Quality Assurance and Certification Technical Features of Floating Ball Valve Assembly Drawing of Floating Ball Valve Standard Materials selection of Floating Ball Valve Production
More informationVALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE BW SW
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationM21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information