ETV is a manufacturer. for Oil and Gas, Chemical, Process Plant, Onshore / offshore industries.

Transcription

1

2 ETV is a manufacturer of ball valves for Oil and Gas, Chemical, Petrochemicals, Process Plant, Onshore / offshore industries.

3 Our range of production is from ½ to 36 class 150 to 2500 floating or Trunnion ball, side entry execution, two or three pieces, bolted construction, full and reduced bore. Top entry Trunnion mounted ball valves from ½ to 10 class 150 to Others diameters could be available on request. Our valves can be soft seated or metal seated, with lever, gear operator or actuators ENP (Electroless Nickel Plating) or other overlays upon request. Our company adheres to a quality management system in accordance with ISO 9001:2008. Design and manufacturing: ETV Valves are manufactured in accordance with the industry International standards to the following API 6D, ASME B16.5, ASME B16.47, ASME B16.3. Others products: - 3 ways ball valves from ½ to 6 class ; - Double block and bleed floating and trunnion ball valves, twin ball, true double isolation.

4 CERTIFICATION: Our products are certified - ISO 9001: European Directive PED 97/23/EC Module H CATEGORY III - Atex - API 6D - GOST-R - RTN Ros TechNadzor certificate - Fire safe CERTIFIED.

5 TESTING: All valves are hydrostatic and Pneumatic tested before delivery according to the applicable standard API 6D & API 598. We have qualified engineers to perform the following: Fugitive Emission test with Helium PMI (Positive Material Identification) LPE (Liquid Penetrant Examination) MPE (Magnetic Particle Examination) Ultrasonic Test Ferritescope Gas test Torque Test

6

7

8 RANGE OF PRODUCTION SIZE ANSI CLASS FB RB /2 / 3/4 3/4 x1/2 1 1 x3/4 1 1/2 1 1/2x1 2 2 x1 1/2 3 3 x x 3 BT200 PIN TRUNNION 6 6 x 4 8 x x x x x x x x x 20 BT210 PLATE TRUNNION x x x x 32

9 ANSI CLASS BF150 FLOATING BOLTED CONSTRUCTION

10 PRODUCTS

11 BT200 TRUNNION MOUNTED BALL VALVE / SIDE-ENTRY / DB&B SINGLE BALL / PIN TRUNNION Range of Production: - SIZE from ½ to 8 (based on the pressure class) - PRESSURE CLASS ANSI API OTHER standard or non-standard pressure classes are optional ON REQUEST Standard Features: - Split body, 3 piece construction - Full or Reduced bore - Bi-directional - Soft seat - Bubble tight seal - Stem sealant injection - Automatic body cavity pressure relief - Anti-blow out stem - Antistatic device - Fire Safe design - O-Ring on primary sealing - Graphite on secondary sealing - Flanged ends (RF - RTJ) - Drain plug - Vent valve (on 6 and larger) - Seat sealant injection points (on and larger) - Lever or gear operated (depending on size and class) Available Features: - Metal to Metal seat - Double-piston effect seats - Lip-seal on primary sealing - Graphite packing on stem sealing for FET - Locking device - Welded or clamped ends - Drain valve - Extended stem - Pneumatic actuator, single or double acting - Hydraulic actuator - Electric actuator - Gas over oil - Bare stem (top-mounting flange to ISO 5211)

12 BT210 TRUNNION MOUNTED BALL VALVE / SIDE-ENTRY / DB&B SINGLE BALL / PLATE TRUNNION Range of Production: - SIZE from 10 to 36 - PRESSURE CLASS ANSI API OTHER standard or non-standard pressure classes are optional ON REQUEST Standard Features: - Split body, 3 piece construction - Full or Reduced bore - Bi-directional - Soft seat - Bubble tight seal - Stem sealant injection - Automatic body cavity pressure relief - Anti-blow out stem - Antistatic device - Fire Safe design - O-Ring on primary sealing - Graphite on secondary sealing - Flanged ends (RF - RTJ) - Drain plug - Vent valve - Seat sealant injection points - Gear operated Available Features: - Metal to Metal seat - Double-piston effect seats - Lip-seal on primary sealing - Graphite packing on stem sealing for FET - Locking device - Welded or clamped ends - Drain valve - Extended stem - Pneumatic actuator, single or double acting - Hydraulic actuator - Electric actuator - Gas over oil - Bare stem (top-mounting flange to ISO 5211)

13 BT220 TRUNNION MOUNTED BALL VALVE / SIDE-ENTRY / DB&B TWIN BALL Range of Production: - SIZE from ½ to 36 (based on the pressure class) - PRESSURE CLASS ANSI API OTHER standard or non-standard pressure classes are optional ON REQUEST Standard Features / Available Features: The STANDARD FEATURES and AVAILABLE FEATURES are the same as per article BT200 and BT210 DBB TWIN BALL VALVE can be in the STD construction (with non standard Face to Face dimension) or with the ANSI B16.10 Face to Face dimension

14 BF150 FLOATING BALL VALVE / SIDE-ENTRY / BOLTED CONSTRUCTION Range of Production: - SIZE from ½ to 6 (based on the pressure class) - PRESSURE CLASS ANSI OTHER standard or non-standard pressure classes are optional ON REQUEST Standard Features: - Split body, 2 or 3 piece construction - Full or Reduced bore - Bi-directional - Soft seat - Bubble tight seal - Automatic body cavity pressure relief - Lever or gear operated (depending on size and class) - Anti-blow out stem - Antistatic device - Fire Safe design - O-Ring on primary sealing - Graphite on secondary sealing - Flanged ends (RF RTJ) Available Features: - Metal to Metal seat - Lip-seal on primary sealing - Graphite packing on stem sealing for FET - Locking device - Welded or clamped ends - Extended stem - Pneumatic actuator, single or double action - Hydraulic actuator - Electric actuator - Gas over oil - Bare stem (top-mounting flange to ISO 5211)

15 BF170 FLOATING BALL VALVE / SIDE-ENTRY / BOLTED CONSTRUCTION / DB&B TWIN BALL Range of Production: - SIZE from ½ to 6 (based on the pressure class) - PRESSURE CLASS ANSI OTHER standard or non-standard pressure classes are available ON REQUEST Standard Features / Available Features: The STANDARD FEATURES and AVAILABLE FEATURES are the same as per article BF150

16 BT300 TOP-ENTRY TRUNNION BALL VALVE Range of Production: - SIZE from ½ to 24 (based on the pressure class) - PRESSURE CLASS ANSI OTHER standard or non-standard pressure classes are optional ON REQUEST Standard Features: - Full or Reduced bore - Bi-directional - Soft seat - Bubble tight seal - Stem sealant injection - Automatic body cavity pressure relief - Anti-blow out stem - Antistatic device - Fire Safe design - O-Ring on primary sealing Graphite on secondary sealing - Flanged ends (RF RTJ) - Drain plug - Vent valve (on 6 and larger) - Seat sealant injections points (on and larger) - Lever or gear operated (depending on size and class) Available Features: - Metal to Metal seat - Double-piston effect seats - Lip-seal on primary sealing - Graphite packing on stem sealing for FET - Locking device - Welded or clamped ends - Drain valve - Extended stem - Pneumatic actuator, single or double action - Hydraulic actuator - Electric actuator - Gas over oil - Bare stem (top-mounting flange to ISO 5211)

17 BV175 3-WAY BALL VALVE Range of Production: - SIZE from ½ to 6 (based on the pressure class) - PRESSURE CLASS ANSI OTHER standard or non-standard pressure classes are optional ON REQUEST Standard Features: - Split body - Full or Reduced bore - T or L port - Soft seat - Bubble tight seal - Anti-blow out stem - Antistatic device - Fire Safe design - O-Ring on primary sealing Graphite on secondary sealing - Flanged ends (RF RTJ) - Lever or gear operated (depending on size and class) Available Features: - Metal to Metal seat - Lip-seal on primary sealing - Graphite packing on stem sealing for FET - Locking device - Welded or clamped ends - Extended stem - Pneumatic actuator, single or double action - Hydraulic actuator - Electric actuator - Gas over oil - Bare stem (top-mounting flange to ISO 5211)

18 BF152 FLOATING BALL VALVE for CRYOGENIC SERVICE Range of Production: Different size and pressure classes are available, dependent on the actual working pressure and temperature Standard Features: - Bonnet extension - Split body, 2 or 3 piece construction - Full or Reduced bore - Bi-directional - Soft seat - Bubble tight seal - Automatic body cavity pressure relief - Anti-blow out stem - Antistatic device - Fire Safe design - Flanged ends (RF - RTJ) - Lever or gear operated (depending on size and class) Available Features: - Metal to Metal seat - Locking device - Welded or clamped ends - Pneumatic actuator, single or double action - Hydraulic actuator - Electric actuator - Gas over oil - Bare stem (top-mounting flange to ISO 5211)

19

20 Materials: Standard Materials offered include: - Carbon steel: ASTM A105N, ASTM A350 Gr.LF2 impact tested to - 50 deg c - Stainless steel: - Austenitic SS: ASTM A182 Gr.F316, ASTM a182 Gr.F316L - Duplex & Super duplex: ASTM A182 Gr.F51, ASTM A182 Gr.F53, ASTM A182 Gr.F55, ASTM A182 Gr.F44 - Special Alloy Material (NEW HEADER) - Inconel 625 & 825, Monel, Hastelloy - Others materials : Titanium, Bronze For others materials unlisted, our staff will be pleased to help you and quote customer s requirements. Our Benefits/Strengths: Materials are 100 % European country of origin certified Valves can be machined out from: - True Forging - Centrifugal castings - Forged bar - Rolled Bar

21

22 References: Engineering Companies: Agip Petrofac Petronas Atp Bechtel Statoil Techint BP AMEC Saipem Projects: Project Carigali Hess West Lutong Baran Field EPIC For Gas Sweetening Facilities Project at Mesaieed & Dukhan - PETROFAC Merapuh (MEPA) production platform - Brooke dockyard and Engineering ATP Oil & Gas (Uk) Ltd - Cheviot Project - Bluewater Industries / Mustang Santos Gladstone - Bechtel Clair Ridge Project - AMEC - BP - Norway Golden Eagle Project - Norway Hess Denmark APS - South Arne Platform (Norsok)

23 Borgosesia PRAY Gravellona T. Borgomanero BIELLA Gattinara Romagnano S. - Ghemme Aosta Cossato A26 Ivrea A5 A5 SANTHIÀ Gaglianico CARISIO A4 A26 NOVARA Milano A26 VERCELLI A5 A4 Alessandria Genova Torino where we are: ETV Srl - European Technology Valves Head office and Plant Via Noveis, Pray ( Bi ) - Italy Tel Our contacts: Purchase department: info@etvalves.it Sales department: sales@etvalves.it Technical department: technical@etvalves.it Quality department: quality@etvalves.it

24 E.T.V. EUROPEAN TECHNOLOGY VALVES S.r.l. via Roma, Pray (BI) - ITALY tel mobile p.iva / c.f info@etvalves.it -