AMEC96. Heating Input: 30, ,000 BTU/h

Transcription

1 Heating Input: 30,000 0,000 BTU/h Two-Stage, Multi-Speed EM Gas Furnace up to 96% AFUE Standard Features Energy-efficient multi-speed EM blower motor Heavy-duty stainless-steel tubular heat exchanger Stainless-steel secondary heat exchanger Two-stage gas valve provides quiet, economical heating Durable Silicon Nitride igniter Quiet two-speed induced draft blower Self-diagnostic control board with constant memory fault code history output to a LED olor-coded low-voltage terminals with provisions for electronic air cleaner and humidifier Low continuous fan speed options offer quiet air circulation All models comply with alifornia Low NOx emissions standards abinet Features Designed for multi-position installation upflow, horizontal left or right ertified for direct vent (-pipe) or non-direct vent (-pipe) Easy-to-install top venting with optional side venting onvenient left or right connection for gas and electrical service abinet air leakage (Q Leak ) % Heavy-gauge steel cabinet with durable finish Fully insulated heat exchanger and blower section Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications ontents Nomenclature Dimensions...4 Airflow Specifications...6 Wiring Diagram...9 Accessories...0 Thermostats...0 * omplete warranty details available from your local dealer or at To receive the Lifetime Heat Exchanger Limited Warranty, (good for as long as you own your home) Lifetime Unit Replacement Limited Warranty (good for as long as you own your home) and the 0-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in alifornia or Québec. SS- 9/4 Amana is a trademark of Maytag orporation or its related companies and used under license to Goodman ompany, L.P., Houston, Texas.

2 Nomenclature Brand A M E B N A A 3 4 5,6 7,8, Minor Revision A- Amana A - Initial Release B - st Revision onfiguration M - Upflow/Horizontal Major Revision - Downflow/Horizontal A - Initial Release B - st Revision Motor V - Variable Speed EM / omfortnet NOx E - Multi- Speed EM N - Low NOx S - Single Speed abinet Width Gas Valve B - 7.5" M - Modulating - " - Stage D - 4.5" S - Single Stage Maximum FM AFUE FM 9-9% AFUE 3-00 FM 96-96% AFUE FM 97-97% AFUE FM MBTU/h ,000 BTU/h ,000 BTU/h 0-0,000 BTU/h SS-

3 Specifications 030BNA 040BNA 0603BNA 0803NA 004NA 05DNA Heating Data High Fire Input¹ 30,000 40,000 60,000 80,000 00,000 0,000 High Fire Output¹ 8,800 38,400 57,600 76,800 96,000 5,00 Low-Fire Steady-State Input¹,000 8,000 4,000 56,000 70,000 84,000 Low-Fire Steady-State Output¹ 0,60 6,880 40,30 53,760 67,00 80,640 AFUE² Temperature Rise Range ( F) Vent Diameter³ " - 3" " - 3" " - 3" " - 3" " - 3" " - 3" No. of Burners irculator Blower Available 0.5" ESP Size (D x W) 0" x 8" 0" x 8" " x 8" " x 8" " x 0" " x " 075 RPM ½ ½ ½ ½ Speed Filter Size (in²) Permanent ,067,04 Disposable Electrical Data Min. ircuit Ampacity⁴ Max. Overcurrent Device (amps)⁵ Shipping Weight (lbs) ¹ Natural Gas BTU/h ² DOE AFUE based upon Isolated ombustion System (IS) ³ Installer must supply one or two PV pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe must be either " or 3" in diameter, depending upon furnace input, number of elbows, length of run and installation ( or pipes). The optional ombustion Air Pipe is dependent on installation/code requirements and must be " or 3" diameter PV. ⁴ Minimum ircuit Ampacity = (.5 x irculator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. ⁵ Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HAR-type circuit breakers of the same size as noted. Notes All furnaces are manufactured for use on 5 VA, 60 Hz, single-phase electrical supply. Gas Service onnection ½" FPT Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical ode and/or all existing local codes. For bottom return: Failure to unfold flanges may reduce airflow by up to 8%. This could result in performance and noise issues. For servicing or cleaning, a 4" front clearance is required. Unit connections (electrical, flue and drain) may necessitate greater clearances than the minimum clearances listed above. In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater. SS- 3

4 Dimensions AIR DISHARGE AIR DISHARGE 8¾ AIR INTAKE " PIPE LEFT SIDE DRAIN TRAP EXTERI HOLES 6½ ¾ ⅝ ENTER DIMPLE F ALTERNATE AIR INTAKE PIPE 3" OD HOLE HIGH VOLTAGE ELETRIAL OUTLET STANDA GAS SUPPLY LOATION A DIM B DISHARGE ⅞ ¾ 6½ 9½ VENT/FLUE PIPE " PV ALTERNATE VENT/FLUE ¾ LOATION RIGHT SIDE DRAIN TRAP EXTERI HOLES HIGH VOLTAGE ELETRIAL OUTLET ALTERNATE GAS SUPPLY ¾ 34½ 4 ½ SIDE UT-OUT 5 9¼ 9⅝ 3 4⅞ 3⅞ 6½ 3 ⅛ 9⅝ 9¼ 5 SIDE UT-OUT ⅜ LEFT SIDE VIEW LOW VOLTAGE ELETRIAL OUTLET 3 ⅞ ⅜ ½ ONDENSATE DRAIN TRAP EXTERI ONNETION (RIGHT LEFT SIDE) ¾ PV FRONT VIEW D FOLDED FLANGES E UNFOLDED FLANGES ⅞ LOW VOLTAGE ELETRIAL OUTLET ⅞ ⅜ ½ RIGHT SIDE VIEW FOLDED FLANGES 3½ UNFOLDED FLANGES Model A B D E 030BNA 7½" 6" 3⅞" ⅛" 3⅝" 040BNA 7½" 6" 3⅞" ⅛" 3⅝" 0603BNA 7½" 6" 3⅞" ⅛" 3⅝" 0803BNA 7½" 6" 3⅞" ⅛" 3⅝" 004NA " 9½" 7⅜" 6" 7½" 05DNA 4½ 3" 0⅞" 9⅜" 0⅞" Minimum learances to ombustible Materials Position Sides Rear Front Bottom Flue Top Upflow 0" 0" 3" 0" " Horizontal 6" 0" 3" 0" 6" = If placed on combustible floor, the floor MUST be wood ONLY. 4 SS-

5 Airflow Data FATY SETTING 030BNA DIP SWITH SETTING FM Rise FM Rise FM Rise FM Rise FM Rise FM FM FM All DIP Switch Positions G T N/A All DIP Switch Positions W T N/A All DIP Switch Positions W T OFF OFF OFF Ylo T Y T ON OFF OFF ON ON OFF OFF ON OFF OFF OFF ON OFF ON ON ON OFF ON ON ON ON Ylo T Y T Ylo T Y T Ylo T Y T N/A Ylo T Y T Ylo T Y T Ylo T Y T Ylo T Y T FATY SETTING 040BNA DIP SWITH SETTING FM Rise FM Rise FM Rise FM Rise FM Rise FM FM FM All DIP Switch Positions G T All DIP Switch Positions W T All DIP Switch Positions W T OFF OFF OFF Ylo T N/A Y T ON OFF OFF ON ON OFF OFF ON OFF OFF OFF ON OFF ON ON ON OFF ON ON ON ON Ylo T N/A Y T Ylo T Y T Ylo T Y T Ylo T Y T Ylo T N/A Y T Ylo T Y T Ylo T Y T N/A Notes All furnaces ship as high speed for cooling. Installer must adjust blower speed as needed. For most jobs, about 400 FM per ton when cooling is desirable. Do not operate above.5" w.c. ESP in heating mode. Operating FM between.5" and.8" w.c. is tabulated for cooling purposes only. SS- 5

6 Airflow Data (cont.) FATY SETTING 0603BNA DIP SWITH SETTING FM Rise FM Rise FM Rise FM Rise FM Rise FM FM FM All DIP Switch Positions G T All DIP Switch Positions W T All DIP Switch Positions W T OFF OFF OFF Ylo T N/A N/A Y T ON OFF OFF ON ON OFF OFF ON OFF OFF OFF ON OFF ON ON ON OFF ON ON ON ON Ylo T N/A N/A Y T Ylo T Y T Ylo T Y T Ylo T Y T Ylo T N/A N/A Y T Ylo T Y T Ylo T Y T N/A N/A FATY SETTING 0803BNA DIP SWITH SETTING FM Rise FM Rise FM Rise FM Rise FM Rise FM FM FM All DIP Switch Positions G T All DIP Switch Positions W T All DIP Switch Positions W T OFF OFF OFF Ylo T N/A Y T N/A 80 ON OFF OFF ON ON OFF OFF ON OFF OFF OFF ON OFF ON ON ON OFF ON Ylo T N/A Y T Ylo T Y T N/A 80 Ylo T Y T Ylo T Y T Ylo T N/A Y T N/A 80 Ylo T Y T N/A 80 ON ON ON Ylo T Y T N/A Notes All furnaces ship as high speed for cooling. Installer must adjust blower speed as needed. For most jobs, about 400 FM per ton when cooling is desirable. Do not operate above.5" w.c. ESP in heating mode. Operating FM between.5" and.8" w.c. is tabulated for cooling purposes only. 6 SS-

7 Airflow Data (cont.) FATY SETTING 004N DIP SWITH SETTING FM Rise FM Rise FM Rise FM Rise FM Rise FM FM FM All DIP Switch Positions G T All DIP Switch Positions W T All DIP Switch Positions W T OFF OFF OFF Ylo T Y T ON OFF OFF ON ON OFF OFF ON OFF OFF OFF ON OFF ON ON ON OFF ON ON ON ON Ylo T Y T Ylo T Y T Ylo T Y T Ylo T Y T Ylo T Y T Ylo T Y T Ylo T Y T FATY SETTING 05DN DIP SWITH SETTING FM Rise FM Rise FM Rise FM Rise FM Rise FM FM FM All DIP Switch Positions G T All DIP Switch Positions W T All DIP Switch Positions W T OFF OFF OFF Ylo T N/A Y T ON OFF OFF ON ON OFF OFF ON OFF OFF OFF ON OFF ON ON ON OFF ON ON ON ON Ylo T N/A Y T Ylo T Y T Ylo T Y T Ylo T Y T Ylo T N/A Y T Ylo T Y T Ylo T Y T N/A Notes All furnaces ship as high speed for cooling. Installer must adjust blower speed as needed. For most jobs, about 400 FM per ton when cooling is desirable. Do not operate above.5" w.c. ESP in heating mode. Operating FM between.5" and.8" w.c. is tabulated for cooling purposes only. SS- 7

8 Temperature Rise Range hart BTU BTU OUTPUT Output vs Vs. TEMPERATURE Temperature Rise RISE hart HART 600 FM FM FMULAS BTU BTU/h OUTPUT Output = = FM x x Rise x RISE RISE Rise = = Formulas BTU OUTPUT BTU/H Output.08 FM x.08 FM OUTPUT Output BTU/h BTU/HR x,000 x 000 TEMPERATURE Temperature Rise RISE 8 SS-

9 Wiring Diagram GN G BR GY YL PU HOT SURFAE IGNITER IRUIT ONNET BL S S OM LOW FIRE PRESSURE SWITH TWO STAGE GY GAS VALVE (ITE RODGERS) FRONT OVER PRESSURE SWITH MANUAL RESET ROLLOUT LIMIT ONTROLS (SINGLE ONTROL ON 30 kbtu AND 40 kbtu) BL 3 T HI PM T T3 3 T4 DIAGNOSTI LED' S AUTO RESET AUXILIARY LIMIT ONTROL EA-H IR-H LINE PK HUM X-FMR L PU YL YLO Y W W R G TWIN 4 3 BR AUTO RESET PRIMARY LIMIT ONTROL BURNER OMPARTMENT BLOWER OMPARTMENT BL IRULAT BLOWER ID BLOWER TWO-STAGE PRESSURE SWITH ASSEMBLY GN NO PU NO BL GY EM MTR HARNESS 3 GN PU RED LED FLASH ODE STEADY ON = INTERNAL GV ERR, MIRO AND FREQUENY HEK RAPID = TWINNING ERR FLASH = FLAME SENSED EN NO FLAME SHOULD BE PRESENT FLASHES = PRESSURE SWITH STUK LOSED/INDUER ERR 3 FLASHES = ST STAGE PRESSURE SWITH STUK LOSED/INDUER ERR 4 FLASHES = OPEN LIMIT SWITH 5 FLASHES = OPEN ROLLOUT/OPEN FUSE DETETED 6 FLASHES = PRESSURE SWITH YLE LOKOUT 7 FLASHES = EXTERNAL LOKOUT (RETRIES) FLASHES = EXTERNAL LOKOUT (REYLES) FLASHES + GROUNDING REVERSED POLARITY 0 FLASHES = GAS FLOW WITH NO ALL F HEAT FLASHES = LIMIT SWITH OPEN-BLOWER FAILURE FLASHES = IGNIT RELAY FAILURE 3 DOUBLE FLASHES = ND STAGE PRESSURE SWITH STUK OPEN/INDUER ERR GY 0 4 V 3 A FUSE INDUED DRAFT BLOWER PU YL 5 IRUIT ONNET BR PK BR GY NO 4 VA 40 VA TRANSFMER PK HIGH FIRE PRESSURE SWITH PK 5 VA BR BR YL PU FLAME SENS JUNTION BOX HASSIS GROUND GN BL BLOWER OMPARTMENT DO SWITH (OPEN EN DO OPEN) AMBER LED FLASH ODE RAPID = LOW FLAME SENSE URRENT FLASH = NMAL OPERATION WITH ALL F ST STAGE HEAT (W) FLASHES = NMAL OPERATION WITH ALL F ND STAGE HEAT 3 FLASHES = W PRESENT WITH NO W 4 FLASHES = Y PRESENT WITH NO G ALL, YLO PRESENT WITH NO G ALL WARNING: DISONNET POWER BEFE SERVIING. WIRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED. INTEGRATED ONTROL MODULE 4V THERMOSTAT ONNETIONS TO 5VA/ Ø /60 HZ POWER SUPPLY WITH OVERURRENT PROTETION DEVIE R Y W W Y G O DEHUM TO R FUSE 3 A TO MIRO TO MIRO GREEN LED FLASH ODE STEADY ON = STANDBY RAPID = NMAL OPERATION WITH ALL F FAN (G) FLASH = NMAL OPERATION WITH ALL F LOW STAGE OOL (YLO + G) FLASHES = NMAL OPERATION WITH ALL F HIGH STAGE OOL/ SINGLE STAGE OOLING (Y + G) 0 DISONNET DO SWITH LINE HUM-OUT LINE TO +VD HUM EA IGN FS TH (5) HLO () PS () HLI (6) MVL (7) (4) TR (9) NO OL ODES: PK PINK BR BROWN ITE BL BLUE GY GRAY RED YL YELLOW ANGE PU PURPLE GN GREEN BLAK 040F00-A NO AUTO RESET AUXILIARY LIMIT ONTROLS PS () HIGH FIRE PRESS. SWTIH MV (8) MVH () HUMIDIFIER INTEGRATED ONTROL MODULE L L JUNTION BOX N INDO AIR IRULAT BLWR ELETRONI AIR LEANER IND HI ID BLWR IND LO HOT SURFAE IGNITER FLAME SENS 5 VA TO 5 VA/ Ø /60 HZ POWER SUPPLY WITH OVERURRENT PROTETION DEVIE 4 VA WARNING:DISONNET POWER BEFE SERVIING. WIRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED. NO INDO AIR IRULAT BLWR N 40 VA TRANSFMER AUTO RESET PRIMARY LIMIT ONTROL MANUAL RESET ROLLOUT LIMIT ONTROLS FRONT OVER PRESSURE SWITH DISONNET LOW FIRE PRESS. SWITH PM HI GAS VALVE NOTES:. SET HEAT ANTIIPAT ON ROOM THERMOSTAT AT 0.7 AMPS.. MANUFATURER' S SPEIFIED REPLAEMENT PARTS MUST BE USED EN SERVIING. 3. IF ANY OF THE IGINAL WIRE AS SUPPLIED WITH THE FURNAE MUST BE REPLAED IT MUST BE REPLAED WITH WIRING MATERIAL HAVING A TEMPERATURE RATING OF AT LEAST 05. USE OPPER ONDUTS ONLY. 4. UNIT MUST BE PERMANENTLY GROUNDED AND ONFM TO N. E.. AND LOAL ODES. 5. TO REALL THE LAST 6 FAULTS, MOST REENT TO LEAST REENT, DEPRESS SWITH F ME THAN SEONDS ILE IN STANDBY (NO THERMOSTAT INPUTS) EQUIPMENT FIELD FIELD SPLIE SWITH (TEMP.) IGNITER SWITH (PRESS.) OVERURRENT PROT. DEVIE JUNTION TERMINAL INTERNAL TO INTEGRATED ONTROL PLUG ONNETION LOW VOLTAGE (4V) LOW VOLTAGE FIELD HI VOLTAGE (5V) HI VOLTAGE FIELD $ INTEGRATED ONTROL MODULE High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death. Wiring is subject to change. Always refer to the wiring diagram on the Warning unit for the most up-to-date wiring. SS- 9

10 Accessories Model Description 030BNA 040BNA 0603BNA 0803NA 004NA 05DNA VENT- oncentric Vent Kit (") VENT-3 oncentric Vent Kit (3") RF0004 Drain Kit -Horizontal Left Vertical Flue EFR0 External Filter Rack with 6"x5" Permanent Filter TBD TBD TBD TBD TBD TBD 070K00000S Flush Mount Vent Kit - 3" or " 070K0000S Flush Mount Vent Kit - " AFE8-60A Fossil Fuel (Duel Fuel) Kit High-Altitude Natural Gas Kit TBD TBD TBD TBD TBD TBD High-Altitude Pressure Switch TBD TBD TBD TBD TBD TBD High-Altitude LP Gas Kit TBD TBD TBD TBD TBD TBD LPLP03 Low LP Gas Pressure Switch LPM-08 LP onversion Kits (Gas Valve) 0 SS-

11 Notes SS-

12 Notes Amana is a trademark of Maytag orporation or its related companies and used under license to Goodman ompany, L.P. All rights reserved. Our continuing commitment to quality products may mean a change in specifications without notice. 04 Goodman ompany, L.P. Houston, Texas Printed in the USA. SS-