AMS8/ADSS8. Single-Stage. Heating Input: 40, ,000 BTU/h

Transcription

1 Heating Input: 40, ,000 BTU/h /ADSS8 Single-Stage Multi-Speed Gas Furnaces 80% AFUE Standard Features Single-stage gas valve Durable Silicon Carbide ignitor Quiet, single-speed draft inducer Self-diagnostic control board Color-coded low-voltage terminals Multi-speed blower motor Certain models comply with California Low NOx emissions standards Cabinet Features Installation: : Upflow, horizontal left or right ADSS8: Dedicated downflow Convenient left or right connection for gas and electrical service Cabinet air leakage (Q Leak ) 2% Heavy-gauge steel cabinet with durable baked-enamel finish Foil-faced insulated heat exchanger Contents Nomenclature Dimensions...5 Airflow Data...8 Wiring Diagrams...11 Accessories...12 * Complete warranty details available from your local dealer or at To receive the Lifetime Heat Exchanger Limited Warranty (good for as long as you own your home) and 10-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in California or Québec. SS- 3/15 Amana is a trademark of Maytag Corporation or its related companies and used under license to Goodman Company, L.P., Houston, Texas. Supersedes 9/13

2 Nomenclature A M S A X A A ,5 6,7, Brand A- Amana Configuration M - Upflow/Horizontal Minor Revision A - Initial Release Gas Vale / Motor B - 1st Revision H - Convertible 2 Stage / Single Speed S - Single Stage / Single Speed Major Revision A - Initial Release AFUE B - 1st Revision 97-97% AFUE 80-80% AFUE NOx N - Natural Gas MBTU/h X - Low NOx 40-40, , , ,000 Cabinet Width 80-80, ,000 A - 14" C - 21" B - 17½" D - 24½" Maximum CFM CFM CFM CFM A D S S B X A A ,6 7,8, Brand A- Amana Configuration M - Upflow/Horizontal Minor Revision C - Downflow/Horizontal A - Initial Release K - Dedicated Upflow B - 1st Revision D - Dedicated Downflow Major Revision Motor A - Initial Release V - Variable Speed/ComfortNet B - 1st Revision E - High Efficiency S - Single Speed NOx N - Natural Gas Gas Valuve X - Low NOx M - Modulating C - 2 Stage Cabinet Width H - Convertible 2 Stage A - 14" C - 21" S - Single Stage B - 17½" D - 24½" AFUE Maximum CFM 97-97% AFUE CFM 80-80% AFUE CFM CFM MBTU/h ,000 BTU/h ,000 BTU/h ,000 BTU/h 2 SS-

3 Specifications 0403A*A 0603A*A 0604B*A 0804B*A 0805C*A 1005C*A 1205D*A 1405DNB Heating Capacity Input ¹ 40,000 60,000 60,000 80,000 80, , , ,000 Natural Gas Output 32,000 48,000 48,000 64,000 64,000 80,000 96, ,000 LP Gas Output 32,000 48,000 48,000 64,000 64,000 80,000 96, ,000 AFUE Available 0.5 ESP Temperature Rise Range ( F) Circulator Blower Size (D x W) 10 x 6 10 x 6 10 x 8 10 x 8 10 x x x x 10 RPM ⅓ ⅓ ½ ½ ½ ½ ¾ ¾ Speed Vent Diameter 3 4" 4" 4" 4" 4" 4" 4" 4" No. of Burners Disposable Filter (in²)* Electrical Data Min. Circuit Ampacity Max. Overcurrent Device (amps) Ship Weight (lbs) ¹ Natural Gas BTU/h; for altitudes above from 0 to 5,500 above sea level, reduce input rating 4% for each 1,000 above 5,500 altitude. 2 DOE AFUE based upon Isolated Combustion System (ICS) 3 Vent and combustion air diameters may vary depending upon vent length. Refer to the latest editions of the National Fuel Gas Code NFPA 54/ANSI Z223.1 (in the USA) and the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2 (in Canada). 4 Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes. 5 Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HACR-type circuit breakers of the same size as noted. * Permanent air filter size is based on 600 FPM velocity. Check with filter manufacturer for specific details. Notes All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply. Gas Service Connection ½ FPT Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes. SS- 3

4 ADSS8 Specifications 0403A*A 0603A*A 0804B*B 1005C*C Heating Capacity Input ¹ 40,000 60,000 80, ,000 Natural Gas Output 32,000 48,000 64,000 80,000 LP Gas Output 32,000 48,000 64,000 80,000 AFUE Available 0.5 ESP Temperature Rise Range ( F) Circulator Blower Size (D x W) 10 x 6 10 x 6 10 x 8 10 x 10 RPM 1/3 1/3 1/2 3/4 Speed Vent Diameter No. of Burners Disposable Filter (in²)* Electrical Data Min. Circuit Ampacity Max. Overcurrent Device (amps) Ship Weight (lbs) Natural Gas BTU/h; for altitudes above from 0 to 5,500 above sea level, reduce input rating 4% for each 1,000 above 5,500 altitude. 2 DOE AFUE based upon Isolated Combustion System (ICS) 3 Vent and combustion air diameters may vary depending upon vent length. Refer to the latest editions of the National Fuel Gas Code NFPA 54/ANSI Z223.1 (in the USA) and the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2 (in Canada). 4 Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes. 5 Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HACR-type circuit breakers of the same size as noted. * Permanent air filter size is based on 600 FPM velocity. Check with filter manufacturer for specific details. Notes All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply. Gas Service Connection ½ FPT Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes. 4 SS-

5 Dimensions Alt. Gas Inlet 1¹³/₁₆ 1-3/4 Supply A B Alt. Flue Outlet Horizontal Left 1-7/16 4⅝ 19½ 30½ 27-7/8 28½ 33-3/8 33⅜ Gas Alt. Inlet Gas Inlet High High-Voltage Inlet /16 23⁵ ₁₆ High Alt. Voltage High Voltage Low-Voltage Voltage Inlet 13-1/4 13¼ Low Alt. LowVoltage 15 23¾ 3/4 28 B Return 23 Model A B Model A B 0403A*A 14 12½ 0805C*A 21 19½ 0603A*A 14 12½ 1005C*A 21 19½ 0604B*A 17½ D*A 24½ B*A 17½ DNB 24½ 23 Notes Line voltage wiring can enter through the right or left side of furnace. Low-voltage wiring can enter through the right or left side of furnace. Conversion kits for high-altitude (5500+ft) natural gas operation are available. Installer must supply the following gas line fittings, according to which entrance is used: Left: One 90º street elbow; one 2½ pipe nipple; one 90º elbow; straight pipe; one ground joint union Right: Straight pipe to reach gas valve Minimum Clearances to Combustible Materials Sides Rear Front¹ SW Vent² ¹ 24 clearance for serviceability recommended. ² Single Wall Vent (SW) to be used only as a connector. Refer to the latest editions of the National Fuel Gas Code NFPA 54/ ANSI Z223.1 (in the USA) and the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2 (in Canada). Note: approved for line contact in the horizontal position. B Top SS- 5

6 ADSS8 Dimensions 19⅝ 28 A B High-Voltage Voltage Electrical Low-Voltage Voltage Electrical Gas Inlet Gas Inlet 33-3/8 33⅜ 18⅜ 11⅜ Model A B 0403A*A 14 12½ 0603A*A 14 12½ 0804B*B 17½ C*C 21 19½ Notes Line voltage wiring can enter through the right or left side of furnace. Low-voltage wiring can enter through the right or left side of furnace. Minimum Clearances to Combustible Materials Sides Rear Front¹ SW Vent² ¹ 24 clearance for serviceability recommended. ² Single Wall Vent (SW) to be used only as a connector. Refer to the latest editions of the National Fuel Gas Code NFPA 54/ ANSI Z223.1 (in the USA) and the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2 (in Canada). B Top 6 SS-

7 Airflow Data CFM & Temperature Rise vs. External Static Pressure Model 0403A*A 0603A*A 0604B*A 0804B*A 0805C*A 1005C*A 1205D*A 1405DNB Motor Speed Tons AC¹ External Static Pressure, (Inches Water Column) CFM Rise CFM Rise CFM Rise CFM Rise CFM Rise CFM CFM CFM High 3 1, , , , , ,243 1,164 1,075 Med 2.5 1, , , , , , Med-Lo Low High 3 1, , , , , ,092 1, Med 2.5 1, , , , , Med-Lo Low High 4 2, , , , , ,786 1,700 1,601 Med 3.5 1, , , , , ,549 1,492 1,391 Med-Lo 3 1, , , , , ,378 1,328 1,261 Low 2.5 1, , , , , ,144 1,111 1,071 High 4 2, , , , , ,627 1,530 1,439 Med 3.5 1, , , , , ,475 1,394 1,307 Med-Lo 3 1, , , , , ,339 1,274 1,204 Low 2.5 1, , , , , ,125 1,125 1,080 High 5 2, , , , , ,837 1,712 1,584 Med 4 1, , , , , ,567 1,469 1,382 Med-Lo 3.5 1, , , , , ,405 1,346 1,235 Low 3 1, , , , , ,174 1, High 5 2, , , , , ,801 1,688 1,577 Med 4 1, , , , , ,577 1,493 1,399 Med-Lo 3.5 1, , , , , ,397 1,326 1,217 Low 3 1, , , , , ,168 1,118 1,060 High 5 2, , , , , ,027 1,902 1,786 Med 4 1, , , , , ,419 1,354 1,271 Med-Lo 3.5 1, , , , , ,245 1,183 1,106 Low 3 1, , , , , , High 5 2, , , , , ,027 1,902 1,786 Med 4 1, , , , , ,419 1,354 1,271 Med-Lo 3.5 1, , , , , ,245 1,183 1,106 Low 3 1, , , , , , ¹ at 0.5 ESP Notes: CFM in chart is without filter(s). Filters do not ship with this furnace, but must be provided by the installer. If the furnace requires two return filters, this chart assumes both filters are installed. All furnaces ship as high-speed cooling and medium-speed heating. Installer must adjust blower cooling and heating speed as needed. For most jobs, about 400 CFM per ton when cooling is desirable. INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE RATING PLATE. This chart is for information only. For satisfactory operation, external static pressure must not exceed value shown on the rating plate. The dashed (----) areas indicate a temperature rise not recommended for this model. At higher altitudes, a properly derated unit will have approximately the same temperature rise at a particular CFM, while ESP at the CFM will be lower. SS- 7

8 ADSS8 Airflow Data CFM & Temperature Rise vs. External Static Pressure Model 0403A*A 0603A*A 0804B*B 1005C*C ¹ at 0.5 ESP Motor Speed Tons AC¹ External Static Pressure, (Inches Water Column) CFM Rise CFM Rise CFM Rise CFM Rise CFM Rise CFM CFM CFM High 3.0 1, , , , , ,116 1,116 1,099 Med 2.5 1, , , , , ,006 1, Med-Lo Low High 3.0 1, , , , , ,166 1,108 1,029 Med 2.5 1, , , , , Med-Lo Low High 4.0 2, , , , , ,726 1,628 1,529 Med 3.5 1, , , , , ,550 1,470 1,364 Med-Lo 3.0 1, , , , , ,402 1,328 1,239 Low 2.5 1, , , , , , High 5.0 2, , , , , ,937 1,808 1,689 Med 4.0 1, , , , , ,568 1,510 1,401 Med-Lo , , , , ,445 1,368 1,287 Low 3.0 1, , , , , SS-

9 Temperature Rise Range Chart BTU BTU/h OUTPUT Output vs TEMPERATURE Vs. Temperature RISE Rise Chart CHART 600 CFM CFM FORMULAS BTU BTU/h OUTPUT Output = = CFM CFRM x 1.08 x x Rise RISE RISE Rise = = Formulas BTU OUTPUT BTU/H Output 1.08 CFM x 1.08 CFM CFM OUTPUT Output BTU/h BTU/HR x 1,000 x 1000 TEMPERATURE Temperature Rise RISE SS- 9

10 Wiring Diagram 24 VAC HUMIDIFIER C G WARNING:DISCONNECT POWER BEFORE SERVICING.WIRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED. R W Y HUMIDIFIER XFMR (6) GND GND (8) MVC (9) INTEGRATED CONTROL MODULE C2 GAS VALVE PU BL 0 FUSE PU 24V 115V XFMR GR OR INTEGRATED CONTROL MODULE 115 VAC HOT AND PARK TERMINALS DIAGNOSTIC LED LINE-H XFMR-H HEAT-H COOL-H GR HOT SURFACE IGNITER PU M1 GAS VALVE 115 VAC NEUTRAL PRIMARY LIMIT C2 BR RD ROLLOUT LIMITS (SINGLE CONTROL ON SOME MODELS) FLAME SENSOR RAPID FLASHES = REVERSED 115 VAC POLARITY/VERIFY GND AUXILIARY LIMITS BR (HI) BL (MED) OR (MED LOW) RD (LOW) (N) CICULATOR BLOWER CAP 15 PIN PLUG ON SOME MODELS INDUCED DRAFT BR BR BLOWER COMPARTMENT BURNER COMPARTMENT NO PRESSURE SWITCH BLOWER 1 1 FLASH = SYSTEM LOCKOUT (RETRIES/RECYCLES EXCEEDED) 2 2 FLASHES = PRESSURE SWITCH STUCK CLOSED 3 3 FLASHES = PRESSURE SWITCH STUCK OPEN 4 4 FLASHES = OPEN HIGH LIMIT C RD RD BL STEADY ON OFF PU DOOR SWITCH SWITCH LOCATED IN BLOWER COMPARTMENT ON SOME MODELS BL = NORMAL OPERATION = CONTROL FAILURE 5 FLASHES = FLAME SENSE WITHOUT GAS VALVE 6 FLASHES = OPEN ROLLOUT 7 FLASHES = LOW FLAME SIGNAL RD RD PU BR OR RD RD OR OR OR BR 24 VAC HUMIDIFIER C 24V THERMOSTAT CONNECTIONS INTEGRATED CONTROL MODULE C G Y W R TO MICRO XFMR (3) XFMR-H LINE-H FP (2) DOOR SWITCH INTERNAL TO INTEGRATED CONTROL IGN IND MV (12) PS (10) PSO (4) HLI (7) HLO (1) COOL-H COOL HEAT HEAT-H AUXILIARY LIMIT CONTROLS 115 VAC FLAME SENSOR HOT SURFACE IGNITER ID BLWR CIRCULATOR BLWR C M1 ID BLOWER PRESSURE SWITCH NO AUTO RESET PRIMARY RO2 (11) LIMIT CONTROL RO1 (5) MANUAL RESET ROLLOUT LIMIT CONTROL(S) (SINGLE CONTROL ON SOME MODELS) 24 VAC 40 VA TRANSFORMER JUNCTION BOX CIR-N XFMR-N LINE-N WARNING: DISCONNECT POWER DISCONNECT BEFORE SERVICING. WIRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED. L GND N TO 115VAC/ 1Ø /60 HZ POWER SUPPLY WITH OVERCURRENT PROTECTION DEVICE JUNCTION BOX TO 115 VAC/ 1/60HZ POWER SUPPLY WITH OVERCURRENT PROTECTION DEVICE LOW VOLTAGE (24V) LOW VOLTAGE FIELD HI VOLTAGE (115V) HI VOLTAGE FIELD JUNCTION TERMINAL PLUG CONNECTION LINE-N GND LINE H IGN-N IND-N EQUIPMENT GND FIELD GND FIELD SPLICE SWITCH (TEMP.) IGNITER SWITCH (PRESS.) OVERCURRENT PROT. DEVICE INTEGRATED CONTROL MODULE High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death. Wiring is subject to change. Always refer to the wiring diagram on the Warning unit for the most up-to-date wiring. COLOR CODES: YELLOW OR ORANGE PU PURPLE GR GREEN BLACK PK PINK BR BROWN ITE BL BLUE GY GRAY RD RED NOTES: 1. SET HEAT ANTICIPATOR ON ROOM THERMOSTAT AT 0.7 AMPS. 2. MANUFACTURER'S SPECIFIED REPLACEMENT PARTS MUST BE USED EN SERVICING. 3. IF ANY OF THE ORIGINAL WIRE AS SUPPLIED WITH THE FURNACE MUST BE REPLACED, IT MUST BE REPLACED WITH WIRING MATERIAL HAVING A TEMPERATURE RATING OF AT LEAST 105 C. USE COPPER CONDUCTORS ONLY. 4. BLOWER SPEEDS MUST BE ADJUSTED BY INSTALLER TO MATCH THE INSTALLATION REQUIREMENTS SO AS TO PROVIDE THE CORRECT HEATING TEMPERATURE RISE AND THE CORRECT COOLING CFM. (SEE SPEC SHEET FOR AIR FLOW CHART) 5. UNIT MUST BE PERMANENTLY GROUNDED AND CONFORM TO N.E.C. AND LOCAL CODES. 0140F00119-C 10 SS-

11 Accessories Model Description LPT-03 ¹ HANG21 AFE18-60A MVK-01 ² MVK-02 ² FTK04 LP Conversion Kit High-Altitude Natural Gas Kit (5500+ ft) Fossil Fuel Kit Masonry Vent Kit Masonry Vent Kit (for 1205D and 1405D models only) Twining Kit ¹ White-Rodgers and Honeywell valves ² Upflow applications only Downflow Sub-base for: Model Description 0403AX** 0603AX** SBT14 14 Furnace 0804BX** SBT17 17½ Furnace 1005CX** SBT21 21 Furnace SS- 11

12 Notes Amana is a trademark of Maytag Corporation or its related companies and used under license to Goodman Company, L.P. All rights reserved. Our continuing commitment to quality products may mean a change in specifications without notice Goodman Company, L.P. Houston, Texas Printed in the USA SS-