MCS Mobile Calibration Unit GPS (115 V 230 V) 1430.
|
|
- Ronald Greene
- 6 years ago
- Views:
Transcription
1 Greiner Vibrograf Prices valid from October 2017 Page 1 / 5 Price list Page Art.No.: Watch timing instruments CHF Vibrograf Compact 900 (115 V 230 V), without accessories AM 10 Automatic Microphone MP 12 microphone for mechanical watches QM 06 microphone for mechanical and quartz watches Thermal printer Martel 7830, serial (115 V 230 V) EM 06 Support with mirror for power supply of quartz watches Movement-holder for EM Opto 06 light barrier for pendulum clocks (without tripod) CM 06 clamp microphone for pocket watches and alarm clocks MCS Mobile Calibration Unit GPS (115 V 230 V) Chrono Touch & MP Chrono Touch (115 V 230 V), without accessories MP 12 microphone for mechanical watches KM 12 for pocket watches and alarm clocks Thermal printer Martel 7870, USB (115 V 230 V) Timocheck (230 V) Timometer (230 V) Timometer (115 V) Page Art.No.: Impermeability CHF Leak Checker Prime (115 V 230 V) Thermal printer Martel 7830, serial (115 V 230 V) Thermal printer Martel 7870, USB (115 V 230 V) WPL 610 (without movement-holder) Movement-holder for one watch Movement-holder for two watches Gast, Compressor 10 bar with foot control (230 V) Gast, Compressor 10 bar with foot control (115 V) Poseidon LT 100 (115 V 230 V) Thermal printer Martel 7830, serial (115 V 230 V) Maintenance unit Gast, Compressor 10 bar (230 V) Gast, Compressor 10 bar (115 V) Planet-Air 6-4 compressor with maintenance unit (230 V) Page Art.No.: Cleaning CHF L2 complete with standard accessories (230 V) ACS 900 with ultrasound, glass jars, wave breaker and lids (230 V) ACS 900 with ultrasound, glass jars, wave breaker and lids (115 V) ACS 900 complete with ultrasound and standard accessories (230 V) ACS 900 complete with ultrasound and standard accessories (115 V) Standard accessories for ACS 900: - 3x x x x x x x x x x x 17134
2 Price list Prices valid from October 2017 Page 2 / Ultrasonic oscillator board (115 V) Ultrasonic oscillator board (230 V) Ultrasonic tank Basket holder with clip (ALU) Upper basket holder Ø 80 mm Lower basket holder Ø 80 mm (5 plastic or 4 metal baskets) Lower basket holder Ø 80 mm (6 plastic baskets) Upper basket holder Ø 80 mm (mounted directly on the axle) Upper basket holder Ø 64 mm Lower basket holder Ø 64 mm (3 metal baskets) Axle for 5 movement-holders (17123) Movement-holder for 3 movements Movement-holder for 6 movements Lid for glass jar and ultrasonic tank Glass jar Wave-breaker for glass jar (baskets mm) Capsule for small parts (plastic antistatic), Ø 22 mm Small basket with lid Ø 20 mm Basket Ø 80 mm H 8 mm (inside H 6.7 mm) without separations same as but with double outer wall Cover Ø 80 mm for plastic baskets Basket Ø 80 mm H 16 mm (inside H 14.7 mm) without separations Basket Ø 80 mm H 24 mm (inside H 22.7 mm) without separations Basket Ø 80 mm H 32 mm (inside H 30.7 mm) with 8 separations Basket Ø 80 mm H 8 mm with 4 separations same as but with double outer wall Basket Ø 80 mm H 8 mm with 8 separations same as but with double outer wall Basket Ø 80 mm H 8 mm with 12 separations same as but with double outer wall Basket Ø 80 mm H 8 mm with 16 separations same as but with double outer wall Basket Ø 80 mm H 8 mm with 4 separations for 2 plates Ø 38 mm same as but with double outer wall Basket Ø 80 mm H 8 mm with 4 separations for 2 plates Ø 25 mm Basket Ø 80 mm H 8 mm with 4 separations Basket Ø 80 mm H 8 mm with 8 separations with round compartment in centre Ø 39 mm same as but with double outer wall Basket Ø 80 mm H 8 mm with 6 separations & 2 x Art.No: Basket Ø 80 mm H 8 mm with 6 separations & 2 x Art.No: & 2 x Art.No: Basket Ø 80 mm H 8 mm with baskets in metal, H 14 mm Ø 64 mm without separations Basket Ø 80 mm H 8 mm with baskets in metal, H 14 mm Ø 64 mm with 5 separations Basket Ø 80 mm H 8 mm with baskets in metal, H 14 mm Ø 64 mm with 4 separations Basket Ø 80 mm H 8 mm with 8 separations and finely woven mesh, mesh size 0.15 x 0.15 mm Cover Ø 80 mm for metal baskets Basket Ø 80 mm H 10 mm (inside H 6.7 mm) without separations Basket Ø 80 mm H 10 mm with 2 separations Basket Ø 80 mm H 10 mm with 4 separations Basket Ø 80 mm H 10 mm with 8 separations Basket Ø 80 mm H 10 mm with 12 separations Basket Ø 80 mm H 10 mm with 9 separations 129.
3 Price list Prices valid from October 2017 Page 3 / Cover Ø 64 mm for metal baskets Basket Ø 64 mm H 15 mm without separations Basket Ø 64 mm H 15 mm with 4 separations Basket Ø 64 mm H 15 mm with 5 separations Plastic balance wheel plates Ø 80 mm, Ø Balance wheels: mm, number of holes: Plastic balance wheel plates Ø 80 mm, Ø Balance wheels: mm, number of holes: Plastic balance wheel plates Ø 80 mm, Ø Balance wheels: mm, number of holes: Plastic balance wheel plates Ø 80 mm, Ø Balance wheels: mm, number of holes: Plastic balance wheel plates Ø 80 mm, Ø Balance wheels: mm, number of holes: Flexible pipe, cm Flexible pipe, cm Clamping piece Connection piece (incl. screws) Active carbon filter with reduction ( ) Clamping piece T 8 Dryer 600 W (230 V) T 8 Dryer 600 W (115 V) GS-50, 10 x 50 ml Cleaning Concentrate GS-500, Cleaning Concentrate, 1 bottle 500ml Mechanik, bottle 1 litre Universal, bottle 1 litre WF4, cleaning solution 5 litre S-3, rinsing solution 5 litre VP3 Exhausting-System (230 V) VP3 Exhausting-System (115 V) VP3 Exhausting-System for two working places (230 V) VP3 Exhausting-System for two working places (115 V) Replacement filter for VP3 19. Page Art.No.: Magnetism CHF Multimag (230 V) Multimag (115 V) Magnomatic (230 V) Magnomatic (115 V) Antimag AM 2 (230 V) Antimag AM 2 (115 V) Magnotest II Line adapter for Magnotest II (230 V) 24.
4 Price list Prices valid from October 2017 Page 4 / 5 Page Art.No.: Tools CHF Timoknack Spare knife Fixation for table Timoknack Timoklick Working plate for 18 delrin press dies and utensils, without press dies Set of 5 delrin press dies for big watches, without setting plate Set of 8 delrin press dies Setting plate for Set of 10 delrin press dies Setting plate for Timopress on demand Set of 6 delrin press dies, flat, small on demand Set of 6 delrin press dies, concave, small on demand Set of 5 delrin press dies, flat, big on demand Set of 5 delrin press dies, concave, big on demand Set of 6 delrin press dies, 1 flat & 5 concave (deep), big on demand Page Art.No.: Polishing machines CHF Polimaxx Premium (230 V) Polimaxx Premium (115 V) Polimaxx l (230 V) Polimaxx l (115 V) Polimaxx II (230 V) Polimaxx II (115 V) Polistar (230 V) PA 012 (230 V) PA 210 (230 V) PA 310 (230 V) PT 1-1 (230 V) PT 3 (230 V) ASG 2 (230 V) Suction dome for ASG PVC spiral tubing (per meter) Tubing clamps (per piece) PM Polishing spindle conical, left, thread M10 / PM 200.x, PT Polishing spindle conical, right, thread M10 / PM 200.x, PT Polishing spindle conical, left, cone / PA 200, PA Polishing spindle conical, right, cone / PA 100, PA 200, PA 012, PA Polishing spindle cylindrical Ø8mm, right, cone / PA 100, PA 200, PA 012, PA Polishing spindle cylindrical Ø8mm, left, cone / PA 200, PA Polishing spindle conical, left, flange Ø14mm / PM 100.x, PA 310, PT 1-2, Polimaxx ll Polishing spindle conical, right, flange Ø14mm / PM 100.x, PA 310, PT 1-1, PT 1-2, Polimaxx l & ll Polishing spindle conical (short), right, flange Ø14mm / PM 100.x, PA 310, PT 1-1, PT 1-2, Polimaxx l & ll Polishing spindle cylindrical Ø8mm, right, flange Ø14mm / PM 100.x, PA 310, PT 1-1, PT 1-2, Polimaxx l & ll Polishing spindle conical, right, flange Ø8mm / Polistar, PA Mini
5 Price list Prices valid from October 2017 Page 5 / 5 Page Art.No.: Flexible shaft machines CHF JSB rpm JSB rpm JSB 2000-DS rpm JSB 2000-DS rpm Electronic foot pedal without cable for JSB KS rpm KS rpm Electronic foot pedal without cable for KS Flexible shaft 100 cm Table tripods for clamping Table tripods for screwing Industrial handpiece with precision-three jaw chuck Industrial handpiece with clamping collet Ball-bearing handpiece with clamping collet Ball-bearing handpiece with three jaw chuck Setting hammer Ball-bearing handpiece with clamping collet Ball-bearing handpiece with three jaw chuck Three jaw chuck for ball bearing handpiece Clamping collet for industrial handpiece Ø 2.35 mm Clamping collet for industrial handpiece Ø 3.0 mm Clamping collet Ø 2.35 mm Clamping collet Ø 3.0 mm 19. Page Art.No.: Ring stick & ring tube sizer CHF High-precision ring stick of hard-anodized aluminum High-precision ring tube sizer of hard-anodized aluminum 47. Page Art.No.: Galvanization and pickling CHF KGA 2000 with standard accessories (230 V) - 6x x x x x Shelves for chains with 12 hooks Shelves for ring or chains with 12 hooks Titanium heater 230 V, 50 Hz, 200 W High-grade steel anode 150 x 50 x 0.5 mm (two pieces needed) Cover for device Tank for KGA litre Cover for tank 1.5 litre Temperature sensor Sensor holder Holder for titanium heater DEOXOR pickle pot (230 V) 459.
Greiner Vibrograf Price list 2015 Page 1 / 5
Greiner Vibrograf Price list 2015 Page 1 / 5 Price list 2015 Page Art.No: Watch timing instruments CHF 4 89200 Vibrograf Compact 900 (115 V 230 V), without accessories 3990. 6 89500 AM 10 Automatic Microphone
More informationCLASSEQ LTD. Spares manual P500A
CLASSEQ LTD Spares manual P500A Spares manual 12/01/2018 Spares manual Page 2 P500A Table of contents for P500A 1. Machine assembly... 4 2. Front panel assembly... 6 3. Front Panel... 8 4. Control unit
More informationCLASSEQ LTD. Spares manual P500
CLASSEQ LTD Spares manual P500 Spares manual 30/01/2018 Spares manual Page 1 P500 Table of contents for P500 1. Machine assembly... 3 2. Front panel assembly... 5 3. Front Panel... 7 4. Control unit assembly...
More informationCLASSEQ LTD. Spares manual P500 AS
CLASSEQ LTD Spares manual P500 AS Spares manual 09/10/2018 Spares manual Page 2 P500 AS Table of contents for P500 AS 1. Machine assembly... 4 2. Front panel assembly... 6 3. Front Panel... 8 4. Control
More informationR1000-R1500 Range. Automatic Labelling Machine. Wine Industry
R1000-R1500 Range Automatic Labelling Machine Wine Industry R1000 - R1500 Range Automatic Labelling Machine General Description The R1000-R1500 range enables up to 4 labels applications and the crimping
More informationVOLUME 2.0 2 This page intentionally left blank JWB 100 Operator s Manual page 3 Table of Contents 1 Summary 1.1 Features 4 1.2 Specifications 4 2 Installation 2.1 Installation 5 3 Structure 3.1 Main Structure
More informationCLASSEQ LTD. Spares manual G400 DUO
CLASSEQ LTD Spares manual G400 DUO Spares manual 03/01/2017 Spares manual Page 1 G400 DUO Table of contents for G400 DUO 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly...
More informationELECTRIC POWER TOOLS SIM180
New Products ELECTRIC POWER TOOLS SIM180 7 Polisher SIM115 4 1 / 2 Angle Grinder Voltage - 230v Frequency - 50hz Rated Power - 1300w Electronic Speed Control Maintains Constant Speed Under Load Soft Start,
More informationCLASSEQ LTD. Spares manual D400 DUO
CLASSEQ LTD Spares manual D400 DUO Spares manual 03/01/2017 Spares manual Page 1 D400 DUO Table of contents for D400 DUO 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly...
More informationMachine assembly Filter & Basket supports 2-3. Hood Assembly 4-7. Wash tank 8-9. Air break assembly 10-11
Spare parts list H857, H957 H857A and H957A Contents Machine assembly Filter & Basket supports - 3 Hood Assembly 4-7 Wash tank 8-9 Air break assembly 10-11 Part number 904.0010 Revision D Rinse & Wash
More informationCLASSEQ LTD. Spares manual P500 AS WS
CLASSEQ LTD Spares manual P500 AS WS Spares manual 12/01/2018 Spares manual Page 2 P500 AS WS Table of contents for P500 AS WS 1. Machine assembly... 4 2. Front panel assembly... 6 3. Front Panel... 8
More informationCLASSEQ LTD. Spares manual G500 DUO
CLASSEQ LTD Spares manual G500 DUO Spares manual 03/01/2017 Spares manual Page 1 G500 DUO Table of contents for G500 DUO 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly...
More informationMPS 1-L Manual Powder System with the PG 1 Powder Gun
bar... 0. m /h 00 00 90 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 kv µa E Operating Instructions and Spare Parts List MPS -L Manual Powder System with the PG Powder Gun 0 0 + m /h Issued 0/9 MPS -L / PG An ITW
More informationmechanics Rotational units made by isel Torquemotor ird B-90 RDH-M RDH-S RDH-XS DSH-S RF 1 Rotary tilting unit Indexing table B-88 B-92 B-94 B-96 B-98
Overview Torquemotor ird B-90 RDH-M Indexing table / Rotary unit B-92 RDH-S Indexing table / Rotary unit B-94 RDH-XS Indexing table / Rotary unit B-96 DSH-S Rotary tilting unit B-98 RF 1 Indexing table
More informationCLASSEQ LTD. Spares manual D500
CLASSEQ LTD Spares manual D500 Spares manual 03/01/2017 Spares manual Page 1 D500 Table of contents for D500 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly... 7 4. Control
More informationCLASSEQ LTD. Spares manual D500 DUO WS
CLASSEQ LTD Spares manual D500 DUO WS Spares manual 03/01/2017 Spares manual Page 1 D500 DUO WS Table of contents for D500 DUO WS 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly...
More informationOriginal Spare parts. for SpriMag and aisa internal COating MaChineS and OvenS
Original Spare parts for SpriMag and aisa internal COating MaChineS and OvenS INDEX 1 Index 1 Index 2 Paint Supply and Spraying Technology 2.1 Paint Supply 2.1.1 Pressure Pot 2.1.2 Paint Filter and Accessories
More informationFoaming of Lubricating Oils (manual)
Foaming of Lubricating Oils (manual) ASTM D 892, ASTM D 6082 sequence IV, ISO 6247, DIN 51566, IP 146, JIS K2518, BS 5092 (obs.) Product group(s): User group(s): Scope: Lubricant Testing Automotive, Engine
More information01 Product overview KT series order picking trolleys MultiPick trolley Pick and Pack Order picking container
01 Product overview 01.01 01.09 KT series order picking trolleys 01 KT1 02 KT2 03 KT3 04 KT4 05 KT DRIVE 06 KT3-KOMBI 07 KT ALU 08 KT-R 09 KT-B 01.10 MultiPick trolley 01.11 Pick and Pack 10 MULTIPICK
More informationSCC 201 E Valid as of E21SE0404 up to E21SE... SCC 201 E
Electrical unit Voltage 3NAC 400V 50-60Hz 1 1 Control panel 2 2 Electrical installation 3 3 Clima Plus 4 4 Steam generator, Bypass 5 5 Hot air heating 6 6 Motor and fan wheel 7 7 Interior cabinet 8 8 Door
More informationArticle Group 3 Work Station for dent pulling
Article Group 3 Work Station for dent pulling Article N o Description 352000 Work-Station WS 20 400V with Dinse connec. Delivery content: 1 x Transformer WS 20 with Dinse connection 1 x trolley 1 x welding
More informationPneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
More informationPROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS
PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS 2018 PRODUCT GUIDE Dent Pulling Solutions for Steel & Aluminum Dual-Spotter Solutions for Steel & Aluminum Panels UNI-9700 DELUXE Aluminum & Steel
More informationHA Thickness Gauge IS:2386 (part 1)- 1963
AGGREGATE TESTING HA50.05 Mechanical Rotating Sample Divider (Motorised) IS : 1607-1960 For obtaining representative sample for sieve analysis. It is suitable for dry sands, fine powders, ores, refractory
More informationSAB 202 Screw compressor units. S pa re parts m an ual
SAB 202 Screw compressor units S pa re parts m an ual en 1 Spare parts list for SAB 202 Pos Designation No Part no Complete compressor LF, aut Vi 4161059 Complete compressor LF, man Vi 4161060 Complete
More informationframe, spindle case dated: 01/17
frame, spindle case dated: 01/17 1 Powered by TCPDF (www.tcpdf.org) frame, spindle case dated: 01/17 Item no. Description Article no. Quantity 1 Caution sticker RO 87080 1 2 Caution plate RO 87081 1 3
More informationDOWNLOAD TÉLÉCHARGUEZ DESCARGA PLV
DOWNLOAD TÉLÉCHARGUEZ DESCARGA 09 PLV Frame Kit & Accessories 346 Mini Frame Kit & Accessories 353 Sign Clip 354 Price Holders 358 Sign Holder System 363 Wobblers 367 Hooks 368 Hooks Accessories 371 Hanging
More informationUtility Carts. Tables/Carts. 18 x x x x x x 72 Must Ship via Truck
Tables/Carts Constructed of Stainless Steel 2 Dual Wheel Casters Without rails 34 high, With rails 36¾ high Assembly Required, Can be assembled for additional $50.00 18 x 24 TA-5001 With top shelf and
More informationFittings & Accessories
Fittings & Accessories 176 AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) FAX 800.531.7335 (330.264.2944) www.akronbrass.com 630 Angle Elbow SWIVEL FEMALE x MALE 2 1 2" & 3" sizes in 30 (64 & 76 mm)
More informationStorage Fittings 1 º q µ ³ ³ Â É 1.1
1.0 Storage Fittings 1 1.1 1 ARENA Plus anti-slip finish welcome to the quiet kitchen Kesseböhmer developed the special ARENA Plus coating which prevents pots and pans, crockery and groceries slipping
More informationCLASSEQ LTD. Spares manual D400
CLASSEQ LTD Spares manual D400 Spares manual 03/01/2017 Spares manual Page 1 D400 Table of contents for D400 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly... 7 4. Control
More informationCLASSEQ LTD. Spares manual G400
CLASSEQ LTD Spares manual G400 Spares manual 03/01/2017 Spares manual Page 1 G400 Table of contents for G400 1. Machine assembly... 3 2. Cabinet assembly... 5 3. Cabinet external assembly... 7 4. Control
More informationSuction Spares and Accessories 2009
MUL91600101 Black Rubber Feet for Machined Base Plates, (Pack of 5) MUL8150038 Black Rubber Feet for Machined Base Plates, (Pack of 4) b MUL94004000 Illuminated Green Rocker Switch (L30mm x W25mm x D30mm)
More informationProduct information Panther Batterien PANTHER BATTERY ACCESSORIES.
Panther Batterien PANTHER BATTERY ACCESSORIES. To maintain the performance and a long service life of all batteries, PANTHER provides a wide range of test equipment, loaders, jump-start boosters, memory
More informationValve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm
Valve Lapping Tool Attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8 mm shank - working speed min. 1000 rpm, max. 1250 rpm - 2
More informationmechanics RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100
Overview RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100 DSH-S Rotary tilting unit 2-102 RF 1 Indexing table 2-104 2-94 Overview
More informationMotor systems for Implantology and Oral Surgery
Motor systems for Implantology and Oral Surgery 67095 EN V10/17 NOUVAG AG, all rights reserved Subject to change 1 We talk Implantology 2 Motor systems for Implantology 3 A motor system capable of perfectly
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationVessels and Distillation Equipment
Vessels and Distillation Equipment 147 A suitable solution for practically every application in well-known BOLA-quality and optimally adapted to your needs. PRODUCT TIPS BOLA Scrubber Columns Pressure:
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationHOPPER LOADER GS-4m/-10m Spare parts etc. Xenon beacon, 24 VDC, 30 ma Controller, ES-20, for -BV model. Suction motor, Lamb, 230 V AC, 1100W, 2-stage
N01 001 010 N01 001 025 N01 001 052 N01 001 030 N01 002 970 HOPPER LOADER GS-4m/-10m Spare parts etc Controller, ES-06 Xenon beacon, 24 VDC, 30 ma Controller, ES-20, for -BV model Xenon beacon, 230 V AC
More informationMSF TRAILERS PRICE LIST 2018
M SF 304 Brander Street Jan Niemand Park Silvertondale Pretoria Tel: 012 771 8556 Cell: 071 971 8605 Fax: 086 212 5937 Email: sales@msftrailers.co.za Web: www.msftrailers.co.za FOLDABLE FOODWARMER STAND
More informationENG. Royal Exclusiv pumps & skimmers
Data sheet and list of s for Bubble King Double Cone 130 For all Bubble King Double Cone protein skimmer 130 vs15 ENG Data sheet for protein skimmer Bubble King Double Cone 130 595,00 for aquariums up
More informationSheet metal work 78 Slitting Shears 80 Sheet Metal Shears 83 Nibblers 86
FEIN General Catalog 2018/2019 Welcome to FEIN In the new FEIN General Catalog 2018, you ll find our complete range of professional and extremely reliable power tools for trades and industry. Designed
More informationCyclic Corrosion Chamber C.C.T AUTO Series
Cyclic Corrosion Chamber C.C.T AUTO Series CCT 5000 AUTO image merely illustrative Cooling system image merely illustrative Specifications/ Models CCT 1300 AUTO CCT 3000 AUTO CCT 5000 AUTO Allows 7 different
More informationCATALOGUE. Valid from 15 June Weldwide Solutions Limited Product Catalogue
CATALOGUE Valid from 15 June 2011 1 CONTENTS Weld Purging Products 3 Weld Gas Analysers 3 Weld Gas Analyser spares and maintenance 4 Inflatable Purge Systems 5 Ring Purge 6 Multi-size Ring Purge 6 Rigid
More informationRA 320 IBC Battery. As at: 01/15/10 Time:17:04
Battery As at: 01/15/10 Time:17:04 Battery As at: 01/15/10 Time:17:04 Pos. Description Reference 01 Covering of battery 320.265 02 Battery 320.091 03 P...484 WA 04 P...485 PA 05 Battery container 320.261
More informationCATALOGUE. Valid from 15 November Weldwide Solutions Limited Product Catalogue
CATALOGUE Valid from 15 November 2011 1 CONTENTS Weld Purging Products 3 Weld Gas Analysers 3 Weld Gas Analyser spares and maintenance 4 Inflatable Purge Systems 5 Rigid Silicone Purge Systems 6 Water-soluble
More informationENG. Royal Exclusiv pumps & skimmers
Data sheet and list of s for Bubble King Double Cone 200 For all Bubble King Double Cone protein skimmer 200 vs12 ENG Data sheet for protein skimmer Bubble King Double Cone 200 815,00 for aquariums up
More informationContinuous level measuring system NB 3000 Selection list
Table of contents Page Overview 2 ------------------------------------------------------------------------------------------------------------------- Specifications 3 -------------------------------------------------------------------------------------------------------------------
More informationMounting plates with predrilled holes for mounting angles Mounting kits Slider... Slider SK-V 20...
Table of contents Product catalogue 2005... 1 Georg Fischer Transportation Engineering... 4 Fifth wheels... 5 Fifth wheels... 6 20t imposed load... 7 SK-S 36.20 PLUS (standard)... 7 Spare parts SK-S 36.20
More informationHARDI COMPONENT GUIDE
HARDI COMPONENT GUIDE HARDI Contents Calibration... 3 Control units... 4 Controllers & accessories... 5 Droplegs... 6 Hose... 7 Hose reels and accessories... 7 Filters... 8 Fittings... 9 Foam Markers...11
More informationENG. Royal Exclusiv pumps & skimmers
Data sheet and list of s for Bubble King Double Cone 250 For all Bubble King Double Cone protein skimmer 250 vs12 ENG Data sheet for protein skimmer Bubble King Double Cone 250 995,00 for aquariums up
More informationSCC 62 E Valid as of E62SE0404 up to E62SE...
Electrical unit Voltage 3 NAC 400V 50-60Hz 1 1 Control panel 2 2 Electrical installation 3 3 Clima Plus 4 4 Steam generator, Bypass 5 5 Hot air heating 6 6 Motor and fan wheel 7 7 Interior cabinet 8 8
More informationENG. Royal Exclusiv pumps & skimmers
Data sheet and list of s for Bubble King Double Cone 150 For all Bubble King Double Cone protein skimmer 150 vs14 ENG Data sheet for protein skimmer Bubble King Double Cone 150 649,95 for aquariums up
More informationT E C H N I C A L S P E C I F I C A T I O N
11340 T E C H N I C A L S P E C I F I C A T I O N TANK BODY for save transportation of diesel and petrol (gasoline) Volume: approx. 16.000 ltr. incl. 3% expansion High Quality Product MADE IN GERMANY 100%
More informationList of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 1994
00.08 List of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 994 Relevant drawing: 0664-700 Unless otherwise stated, all measurements are in mm.) Pos. Designation Qty per comp. H M Used w/pos.
More informationFacility service Equipment
Facility service Equipment 112 116 120 121 122 122 123 124 125 126 126 Enforce Towing Tug Service & Equipment Soiled Linen Trolleys Linen Tables Clean Linen Trolleys Linen Tray Storage Trolley Wet and
More informationMig 410, Mig 510. Spare parts list. Edition Valid for serial no. 627-xxx-xxxx, 122-xxx-xxxx
Spare parts list Edition 20120117 Valid for serial no. 627-xxx-xxxx, 122-xxx-xxxx Ordering no. Product 0349 302 408 Origo Mig 410, 400-415 V 3~50Hz 0349 302 713 Origo Mig 410, 230/400-415/500V 3~50Hz;
More informationCal. VS3JA SOLAR SERIES 10 1/ mm. Approx. 6 months. Ø 24.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS3JA Movement Size 10 1/2 Casing Diameter Ø 24.0mm Height 3.47mm Running Time Approx. 6 months Date: 2/May/'17 Cal. VS3JA Items Rev. Page Features
More informationSpare Parts List - DUO 500 & DUO 2
Spare Parts List - DUO 00 & DUO 2 Issue Date 03//200 Part No. 930.000 Issue B MD - 200 Water Inlet -2 Water Drainage 3-4 Wash Pump -6 Bottom Washing / Rinsing System 7-8 Top Washing / Rinsing System DUO
More informationList of Parts for Screw Compressor VMY 447 H and VMY 447 M Model 1994
00.08 List of Parts for Screw Compressor VMY 447 H and VMY 447 M Model 994 Relevant drawing: 0664-70 Unless otherwise stated, all measurements are in mm.) Pos. Designation Qty per comp. H M Used w/pos.
More informationCar & Workshop Range Created :07 Revised :02 Page 1
Range 2005 Created 25.05.2005 11:07 Revised 06.07.2005 14:02 Page 1 INDEX Article Group Page Battery Chargers 3 Booster Cables 4 Power Stations 5 Axle Stands 6 Bottle Jacks 6 Trolley Jacks 6 Car Tyre Inflator
More informationMSRP* 2007 Chevrolet Silverado 2500HD LS $42,400
Dark Pewter MSRP* 2007 Chevrolet Silverado 2500HD LS $42,400 1SK Package $825 16" x 6.5" Polished Aluminum (4) Models & Packages Exterior: Graystone Metallic $0 Interior: Dark Pewter w/custom Cloth Seat
More informationList of parts for SAB 128 Mk 4
List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39
More informationCARRY BIKE 200UL UNIVERSAL
63 CARRY BIKE PRO C2 CARRY BIKE 200UL UNIVERSAL DELUXE BUNK LADDERS Compact design which can be installed under window. 2 bike standard with capacity for up to 4 bikes with installation of additional rails.
More informationSpindles and converters
High Speed Spindles F A C T S A B O U T Spindles and converters SPINTEC spindles are designed for clients with high demands on accuracy and reliability of service. The spindles are manufactured with the
More informationTissue Boxes. Restroom. Intros Cube Tissue Box. Maxim World Stainless Steel Tissue Box. Maxim World Textured Tissue Box
Tissue Boxes Maxim World Stainless Steel Tissue Box # 60710009 Durable Heavy weight Classic stainless steel 12 L x 12 W x 13 H cm Intros Cube Tissue Box # 54600005 Price competitive Classic design stainless
More informationList of parts for SAB 163 Mk 4
03.0 List of parts for SAB 63 Mk 4 Relevant drawings 0662-740 Pos. Compressor complete, male, Man. V i 46-62 Compressor complete, female, Man. V i 46-63 Compressor complete, male, Auto. V i 46-64 Compressor
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationAIRTOOLS. Ratchets 256. Impact tools 257. Screwdrivers 261. Drills 262. Hammers 263. Sanders and grinders 264. Special tools 266.
254 Ratchets 256 Impact tools 257 Screwdrivers 261 Drills 262 Hammers 263 Sanders and inders 264 Special tools 266 Blow guns 268 Hose reels 269 Air line accessories 270 Hoses 273 255 USAG airtools comply
More informationRA 800 Sauber Accessories Brush body. As at: 01/15/10 Time:21:28
Accessories Brush body As at: 01/15/10 Time:21:28 Accessories Brush body As at: 01/15/10 Time:21:28 Pos. Description Reference 01 Allen-screw M 8x55 P...489 H 02 U-shim M 8 P...497 T 03 Roller 530.136
More informationQUARTERLY / ANNUAL MOBILE FIRE APPARATUS INSPECTION REPORT. Manufacturer. Serial no. Legend:
QUARTERLY / ANNUAL MOBILE FIRE APPARATUS INSPECTION REPORT Inspection date Fire department Apparatus no. Apparatus Manufacturer Model Serial no. Hourmeter _ Chassis Make _ Model VIN Odometer Legend: X
More informationPIN VICES 02 2 DRILL 02 9 CUTTING BROACHES SMOOTHING BROACHES 02 13
02 PIN VICES 02 2 DRILL 02 9 CUTTING BROACHES 02 10 SMOOTHING BROACHES 02 13 PIN VICES i Pin vices are used to firmly hold items such as winding stems, cutting and smoothing broaches, drills, taps, wires,
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More informationSPARE PARTS MANUAL. FR510DXs2b. Before purchasing, please contact us. on to check correct requirements. U.K DXs2b-NB2GCA2
SPARE PARTS MANUAL FR510DXs2b Before purchasing, please contact us on 01535 669604 to check correct requirements U.K. 1-18 510DXs2b-NB2GCA2 INDEX P1 HANDLE BAR ASSEMBLY P2 CHASSIS MOULDINGS P3 FRONT CHASSIS
More informationVERTICAL CUTTER FP-50 SPECIFICATIONS
VERTICAL CUTTER FP-50 Ideal to make bread crumbs, humus, mashed potato, vinaigrettes, meat paste, salmon pate, chopped nuts. Equipment can be used for mincing, chopping, pureeing, or whipping any products
More informationThe Modular System SIHI ISOchem
The Modular System SIHI ISOchem Description Standard chemical pumps of the SIHI ISOchem range are horizontal single-stage volute casing pumps with dimensions to ISO 2858 / EN 22858. They meet the technical
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationExamination tables lamps chairs cabinets trolleys accessories. Examination room furniture
Examination tables lamps chairs cabinets trolleys accessories Examination room furniture 1 Comprehensive range of high-quality products A well-functioning examination room contains a wide range of functional
More informationSoldering/Desoldering. Convection Rework. Fume Extraction. Fluid Dispensing
Soldering/Desoldering Convection Rework Fume Extraction Fluid Dispensing www.beasuperproducer.com BVX-100 Benchtop Single User Arm/Plenum System Portable, single user fume extraction system Low noise unit
More informationCOMPACT RACK TYPE DISHWASHER
SPARE PARTS CATALOG ELECTROLUX PROFESSIONAL COMPACT RACK TYPE DISHWASHER 44 66 Models Affected: Electrolux Part Number Description 534034 ECRT66R208 534035 ECRT66L208 534036 ECRT66R240 534037 ECRT66L240
More informationRing Type. Lever Type. Straight Type. Torque Type. Long Type. 90 Mini Angle Type. 90 Mini Angle Type (Very Small Head) 90 Angle Type.
ULTRA-PRECISION HIGH TORQUE AIR GRINDER System Chart Model Price Attachment ispeed E0 E0 E00 E000 RE00 IR-0 9.00 RE0 IH-00 9.00 IG-00.00 RE0 HG-00 9.00,000 min - (rpm) Max. ( ) RE0 BMH-00 9.00 RE0 MFC-00S.00,000
More informationSONIC GM Express Service Tool Kit*
SONIC GM Express Service Tool Kit* Drawer 1 E107901 Empty Foam for the 26" SFS 79pcs 1/4" Combination Socket Set & Screwdrivers 1 ea 1310 Screwdriver, PH.0 1 ea 1311 Screwdriver, PH.1 1 ea 1312 Screwdriver,
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationBESTSELLER. Linear bushings. Product properties:
are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall
More informationSERVICE MANUAL BMG-555 ULTRAPRO VERSION 1.7 For serial numbers 21853B and above.
SERVICE MANUAL BMG-555 ULTRAPRO VERSION 1.7 For serial numbers 21853B and above. FOR MORE INFORMATION VISIT WWW.DIAMATICUSA.COM Diamatic 05/2013 This document is not contractual Design and technical specifications
More informationCoastside County Water District Board of Directors. Purchase of a New Service Truck from Summit Truck Equipment
STAFF REPORT To: From: Coastside County Water District Board of Directors Dave Dickson, General Manager Agenda: July 11, 2017 Date: July 6, 2017 Subject: Purchase of a New Service Truck from Summit Truck
More informationD10 Page. Contents. Complete Equipment with Scope of Supplies 2. Accessories 3
01.2009 UK D10 1 D10 Page Contents Complete Equipment with Scope of Supplies 2 Accessories 3 Spare Parts D10-III 230V / 400V 4-5 Motors D10 universal 6 Transport shaft, mixing shaft 7 Electric Control
More informationWall Mounted Accessories
103 Our stylish range of wall mounted accessories combine design innovation and top quality manufacturing to offer a comprehensive collection, with something to suit any style of bathroom. 104 Soap Dispensers
More informationflowtronic Sensor Series S8005 flowtronic Sensor Series S8005 Product Information Version GREGORY Technology GmbH
Product Information Version 11.04.2016 GREGORY Technology GmbH www.flowtronic.de Introduction The flowtronic sensors are developed for fuel consumption measurement of internal combustion engines. Today
More information20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)
20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain
More informationONLY WHILE SUPPLIES LAST! FLEXVOLT XR BRUSHLESS # GET 5 FOR. At Time of Purchase # # At Time of Purchase #
L PROS. DEALS. PROS. R EAL DEALS. PROS. DEAL L PROS. DEALS. PROS. R EAL DEALS. PROS.NEW! DEAL L PROS. DEALS. PROS. R STOCKING! EAL DEALS.DEALS. PROS.NOW DEAL 20V MAX* 2 TOOL COMBO KIT 1/4" 3-Speed Impact
More informationRotary unit ZD 30. Collet holder. Clamping ring housing SK 20 for tools Ø 3-13 mm, with installation ring. Part no.:
Rotary unit ZD 30 Features Low play toothed belt drive with Stepper motor Reduction 1 : 30 Shaft with Ø 15 mm boring Housing flange with inner cone SK 20 Weight: 2,9 kg For pin assignment see page B-122
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationCal. VS37A SOLAR SERIES 10 1/ mm. Approx. 6 months. Ø 24.0mm. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing SOLAR SERIES Cal. VS37A Movement Size 10 1/2 Casing Diameter Ø 24.0mm Height 2.98mm Running Time Approx. 6 months Date: 15/Dec./'17 Cal. VS37A Items Rev. Page Features
More informationPLASTER & HEAVY MATERIAL. Machine-based application of plaster and other heavy materials PLASTER & HEAVY MATERIAL
PLASTER & HEAVY MATERIAL PLASTER & HEAVY MATERIAL Machine-based application of plaster and other heavy materials Simple material handling Smoothing Reinforcing Structuring Top coating Mixing Material application
More informationParts list ErgoStrap 600E Frame - Cutter - Strap lifter
Parts list ErgoStrap 600E Frame - Cutter - Strap lifter Item Quantity Unit Designation Art. No. 1.1 1 ea. Frame with storage compartment (without attachement parts) 600 E 600332 1.2 2 ea. Large wheels
More information